September 2019 - stunnel-users

stunnel with OpenSSL engine: reload leaks HSM connections?
by Lynch, Andrew 26 Sep '19

26 Sep '19

Hi, We are using stunnel as a server to terminate incoming TLS connections. The config has around 70 services with certificates whose EC private keys are stored in an HSM and accessed using an OpenSSL engine. Over time, after numerous reloads of stunnel (kill -HUP) the HSM reports that its connection table is full. Logging from the engine shows that stunnel is never freeing the keys and therefore the engine is not closing the associated sessions with the HSM. Each stunnel reload opens 70 new sessions until eventually the HSM's configured limit is exceeded. This behaviour has been observed on Suse Enterprise Linux 12.3 with the system-provided stunnel-5.00-4.3.4, but I can reproduce it with my own build of the current version 5.55. Is this a known issue? It appears that other (ephemeral) keys are being freed, just not those associated with the service certificates. Currently our workaround is to perform a full restart instead of a reload. This closes all HSM sessions when the process terminates, but of course it also kills any open client connections so it can only be done during the scheduled maintenance windows. Regards, Andrew.

1 0

Re: [stunnel-users] Problems when using PSK between a version of stunnel usingopenssl 1.0 and a version of stunnel using openssl 1.1.1 in stunnel-users Digest, Vol 182, Issue 7
by Koperberg, J. (Hannah) 25 Sep '19

25 Sep '19

Hi Brent Thank you for your suggestions. I installed stunnel version 5.55 on the client test side (where the openssl version OpenSSL 1.1.1c is). That has solved the problem. Kind regards and thanks again for your help, Hannah Koperberg, de Volksbank N.V., The Netherlands From: Brent Kimberley <brent_kimberley(a)rogers.com> Sent: woensdag 18 september 2019 18:30 To: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] stunnel-users Digest, Vol 182, Issue 7 psk_find() and psk_server_callback() are marked NOEXPORT. You can try whitebox - decompile ctx.c:: psk_server_callback() and/or blackbox - breaking the problem into parts to see what works/fails. Decomposing the problem into parts : a) Two differing stunnel versions and a common openssl library. b) One common stunnel version and two differing openssl libraries. On Wednesday, September 18, 2019, 11:28:48 a.m. EDT, Brent Kimberley <brent_kimberley(a)rogers.com<mailto:[email protected]>> wrote: >> 2019.09.16 13:36:28 LOG6[3]: PSK identity not found (session resumption?) Try dumping the symbols for ctx.c::psk_find(), ssl_lib.c::SSL_get_ex_data(), and ctx.c:: psk_server_callback(). ________________________________ Dit e-mailbericht is alleen bestemd voor de geadresseerden. Indien dit bericht niet voor u is bedoeld, wordt u verzocht de afzender hiervan op de hoogte te stellen door het bericht te retourneren en de inhoud niet te gebruiken. This e-mail message is intended to be exclusively for the addressee. If you are not the intended recipient you are kindly requested not to make any use whatsoever of the contents and to notify the sender immediately by returning this e-mail message.

2 1

Re: [stunnel-users] stunnel-users Digest, Vol 182, Issue 11
by Brent Kimberley 24 Sep '19

24 Sep '19

>>We are running stunnel-5.49-1.ppc on AIX 7100-05-03-1846. >>It will stay up awhile and our connection tests work, but it core dumps. Here’s the message in the log file. Thoughts? >>INTERNAL ERROR: Out of memory at s3_both.c, line 626 Hi Gerald. You may have found a memory leak. Try looking at: 1) line 626 of OpenSSL::s3_booth.c https://github.com/openssl/openssl/blob/OpenSSL_1_0_2-stable/ssl/s3_both.c 2) line 296 of stunnel::str.c ; and/or https://github.com/mtrojnar/stunnel/blob/stunnel-5.49/src/str.c 3) dbx, truss, or probevue - in an offline dev environment. http://archive.ibmsystemsmag.com/aix/administrator/performance/debugging-me…

1 0

AIX:stunnel core dumping
by Gerald Shaw 24 Sep '19

24 Sep '19

Hello, We are running stunnel-5.49-1.ppc on AIX 7100-05-03-1846. It will stay up awhile and our connection tests work, but it core dumps. Here’s the message in the log file. Thoughts? INTERNAL ERROR: Out of memory at s3_both.c, line 626 Best, Gerald Shaw

1 0

Cannot create .crt file
by John Khoo 24 Sep '19

24 Sep '19

Hi, I am new to STunnel. I come to know STunnel thru this link: http://www.ibphoenix.com/downloads/Secure_connections_to_Firebird_with_Stun… Based on the instruction, I tried create a certificate using this line below: openssl ca -config "C:\Program Files (x86)\stunnel\config\openssl.conf" -policy policy_anything -notext -in C:\CA\temp\vnc_server\server.req -out C:\CA\temp\vnc_server\server.crt However, no crt file is created and no error is prompted. I hope that someone can help me. Thanks.

1 0

Stunnel and Sophos UTM
by James Brown 20 Sep '19

20 Sep '19

Has anybody been able to use stunnel to update the Sophos UTM’s firewall? I know it has a Restful API , but do not know how to use this with stunnel. https://www.sophos.com/en-us/medialibrary/PDFs/documentation/UTMonAWS/Sopho… <https://www.sophos.com/en-us/medialibrary/PDFs/documentation/UTMonAWS/Sopho…> Any experiences or suggestions? Thanks, James.

2 1

Re: [stunnel-users] Stunnel help and guidance request
by Noonan, M.P. (Mike) 19 Sep '19

19 Sep '19

Hi Gerald, I assume you got stunnel from the oss4aix.org site. We don't use the freeware openssl, but instead the IBM one: [root@duist:/data/O01] lslpp -l | grep openssl openssl.base 1.0.2.1801 COMMITTED Open Secure Socket Layer openssl.license 1.0.2.1801 COMMITTED Open Secure Socket License openssl.man.en_US 1.0.2.1801 COMMITTED Open Secure Socket Layer openssl.base 1.0.2.1801 COMMITTED Open Secure Socket Layer I installed stunnel-5.29 on one of our lpars which I forced with -nodeps: rpm -Uhv --nodeps stunnel-5.29-1.aix5.2.ppc.rpm It picked up the IBM libs, but had the same problem... [root@duist:/data/O01] ldd /usr/bin/stunnel /usr/bin/stunnel needs: /usr/lib/threads/libc.a(shr.o) /usr/lib/libpthreads.a(shr_comm.o) /usr/lib/libpthreads.a(shr_xpg5.o) /usr/lib/libcrypto.a(libcrypto.so.1.0.2) /usr/lib/libssl.a(libssl.so.1.0.2) /unix /usr/lib/libcrypt.a(shr.o) [root@duist:/data/O01] /usr/bin/stunnel Could not load program /usr/bin/stunnel: Symbol resolution failed for stunnel because: Symbol strcmp (number 112) is not exported from dependent module /usr/lib/libcrypto.a(libcrypto.so.1.0.2). Symbol memmove (number 137) is not exported from dependent module /usr/lib/libcrypto.a(libcrypto.so.1.0.2). Symbol strncpy (number 142) is not exported from dependent module /usr/lib/libcrypto.a(libcrypto.so.1.0.2). Symbol strcpy (number 169) is not exported from dependent module /usr/lib/libcrypto.a(libcrypto.so.1.0.2). Symbol bcopy (number 245) is not exported from dependent module /usr/lib/libcrypto.a(libcrypto.so.1.0.2). I then downloaded and installed stunnel-5.49 from oss4aix.org and installed that version which worked fine.. [root@duist:/data/O01] /usr/bin/stunnel [ ] Clients allowed=31999 [.] stunnel 5.49 on powerpc-ibm-aix5.2.0.0 platform [.] Compiled with OpenSSL 1.0.2p 14 Aug 2018 [.] Running with OpenSSL 1.0.2r 26 Feb 2019 [.] Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI [ ] errno: (*_Errno()) [!] Invalid configuration file name "/opt/freeware/etc/stunnel/stunnel.conf" [!] realpath: No such file or directory (2) [ ] Deallocating section defaults I expect that if you upgrade your freeware openssl to at least 1,0,2r and upgrade stunnel to 5.49 your problem should be solved. Met vriendelijke groet, Mike Noonan From: stunnel-users <mailto:[email protected]> On Behalf Of Gerald Shaw Sent: Wednesday, September 18, 2019 11:18 PM To: mailto:[email protected] Subject: [stunnel-users] Stunnel help and guidance request Hello all, I'm new to the mailing list. I'm trying to run stunnel-5.29-1.ppc, and I'm having issues. I'd appreciate your help (or point me to the solution in the archives). OS - AIX 7100-05-03-1846 /home/shawg# rpm -qa|grep -i openssl openssl-1.0.2n-1.ppc /home/shawg# ldd `which stunnel` /usr/bin/stunnel needs: /usr/lib/libc.a(shr.o) /usr/lib/libpthreads.a(shr_comm.o) /usr/lib/libpthreads.a(shr_xpg5.o) /opt/freeware/lib/libcrypto.a(libcrypto.so.1.0.2) /opt/freeware/lib/libssl.a(libssl.so.1.0.2) /unix /usr/lib/libcrypt.a(shr.o) ** ERROR MESSAGE_- /home/shawg# /usr/bin/stunnel exec(): 0509-036 Cannot load program /usr/bin/stunnel because of the following errors: 0509-130 Symbol resolution failed for stunnel because: 0509-136 Symbol strcmp (number 112) is not exported from dependent module /opt/freeware/lib/libcrypto.a(libcrypto.so.1.0.2). 0509-136 Symbol memmove (number 137) is not exported from dependent module /opt/freeware/lib/libcrypto.a(libcrypto.so.1.0.2). 0509-136 Symbol strncpy (number 142) is not exported from dependent module /opt/freeware/lib/libcrypto.a(libcrypto.so.1.0.2). 0509-136 Symbol strcpy (number 169) is not exported from dependent module /opt/freeware/lib/libcrypto.a(libcrypto.so.1.0.2). 0509-136 Symbol bcopy (number 245) is not exported from dependent module /opt/freeware/lib/libcrypto.a(libcrypto.so.1.0.2). 0509-192 Examine .loader section symbols with the 'dump -Tv' command. *** echo $LIBPATH /opt/freeware/lib:/usr/lib ________________________________ Dit e-mailbericht is alleen bestemd voor de geadresseerden. Indien dit bericht niet voor u is bedoeld, wordt u verzocht de afzender hiervan op de hoogte te stellen door het bericht te retourneren en de inhoud niet te gebruiken. This e-mail message is intended to be exclusively for the addressee. If you are not the intended recipient you are kindly requested not to make any use whatsoever of the contents and to notify the sender immediately by returning this e-mail message.

2 1

Stunnel help and guidance request
by Gerald Shaw 18 Sep '19

18 Sep '19

Hello all, I’m new to the mailing list. I’m trying to run stunnel-5.29-1.ppc, and I’m having issues. I’d appreciate your help (or point me to the solution in the archives). OS - AIX 7100-05-03-1846 /home/shawg# rpm -qa|grep -i openssl openssl-1.0.2n-1.ppc /home/shawg# ldd `which stunnel` /usr/bin/stunnel needs: /usr/lib/libc.a(shr.o) /usr/lib/libpthreads.a(shr_comm.o) /usr/lib/libpthreads.a(shr_xpg5.o) /opt/freeware/lib/libcrypto.a(libcrypto.so.1.0.2) /opt/freeware/lib/libssl.a(libssl.so.1.0.2) /unix /usr/lib/libcrypt.a(shr.o) ** ERROR MESSAGE_- /home/shawg# /usr/bin/stunnel exec(): 0509-036 Cannot load program /usr/bin/stunnel because of the following errors: 0509-130 Symbol resolution failed for stunnel because: 0509-136 Symbol strcmp (number 112) is not exported from dependent module /opt/freeware/lib/libcrypto.a(libcrypto.so.1.0.2). 0509-136 Symbol memmove (number 137) is not exported from dependent module /opt/freeware/lib/libcrypto.a(libcrypto.so.1.0.2). 0509-136 Symbol strncpy (number 142) is not exported from dependent module /opt/freeware/lib/libcrypto.a(libcrypto.so.1.0.2). 0509-136 Symbol strcpy (number 169) is not exported from dependent module /opt/freeware/lib/libcrypto.a(libcrypto.so.1.0.2). 0509-136 Symbol bcopy (number 245) is not exported from dependent module /opt/freeware/lib/libcrypto.a(libcrypto.so.1.0.2). 0509-192 Examine .loader section symbols with the 'dump -Tv' command. *** echo $LIBPATH /opt/freeware/lib:/usr/lib ** I’d appreciate any help or guidance. Thanks in advance. R, G. Shaw

1 0

Re: [stunnel-users] stunnel-users Digest, Vol 182, Issue 7
by Brent Kimberley 18 Sep '19

18 Sep '19

>> 2019.09.16 13:36:28 LOG6[3]: PSK identity not found (session resumption?)Try dumping the symbols for ctx.c::psk_find(), ssl_lib.c::SSL_get_ex_data(), and ctx.c:: psk_server_callback(). Date: Tue, 17 Sep 2019 18:18:13 +0200 From: Hannah Koperberg <hannah.koperberg(a)gmail.com> Subject: [stunnel-users] Problems when using PSK between a version of stunnel usingopenssl 1.0 and a version of stunnel using openssl 1.1.1 We encounter problems when using PSK between a version of stunnel using openssl 1.0 and a version of stunnel using openssl 1.1.1 The problem being the following: 2019.09.16 13:36:28 LOG6[3]: PSK identity not found (session resumption?) 2019.09.16 13:36:28 LOG7[3]: TLS alert (write): fatal: unknown PSK identity 2019.09.16 13:36:28 LOG3[3]: SSL_accept: s3_srvr.c:2845: error:1408B0DF:SSL routines:ssl3_get_client_key_exchange:psk identity not found No problems are encountered when using certificates or when the same versions of stunnel and openssl are used. In the latter case neither certificates nor PSK give any problems connecting. Kind regards, Hannah Koperberg, de Volksbank in the Netherlands

1 1

openssl inquiry
by Brent Kimberley 16 Sep '19

16 Sep '19

Can someone please walk me through how to replace 1.1.1c with 1.1.1d ? For example: 1. Download from SLP https://github.com/slproweb/opensslhashes/ 2. Extract & overwrite

1 0