stunnel-users February 2020

11 participants
12 discussions

older browsers, stunnel and privoxy
by kovacs janos 04 Mar '24

04 Mar '24

sorry to bother, im trying to make older browsers be able to display TLS 1.1 and TLS 1.2 sites. i heard stunnel cant be configured to always forward to the current site address dynamically, thats why i would use privoxy. the browser is configured to send to: 127.0.0.1 443 stunnel config has this at the end: [Tunnel_in] client = yes accept = 127.0.0.1:443 connect = 127.0.0.1:8118 verifyChain = yes CAfile = ca-certs.pem checkHost = localhost 127.0.0.1:8118 is the privoxy address. this is what stunnel writes: LOG5[main]: Configuration successful LOG5[0]: Service [Tunnel_in] accepted connection from 127.0.0.1:3261 LOG5[0]: s_connect: connected 127.0.0.1:8118 LOG5[0]: Service [Tunnel_in] connected remote server from 127.0.0.1:3262 and the browser infinitely loads, and never loads anything or leaves the page. if i remove the last 3 lines, its the same just with this line added: LOG4[main]: Service [Tunnel_in] needs authentication to prevent MITM attacks but it doesnt give an error or anything. with a configuration like: [Tunnel_out] client = no accept = 127.0.0.1:443 connect = 127.0.0.1:8118 cert = stunnel.pem this is what it gives: LOG5[3]: Service [Tunnel_out] accepted connection from 127.0.0.1:3294 LOG3[3]: SSL_accept: 1407609B: error:1407609B:SSL routines:SSL23_GET_CLIENT_HELLO:https proxy request LOG5[3]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket and browser gives a server not found error immediately. im not even sure if i should use client or server configuration in a case like this, but none of them works anyway. all i would need is for my browser to get the pages decrypted, or at least in less than TLS1.1. like how on newipnow.com i can access sites with any encryption, since they are sent to the browser without encryption. the browser just gives an "unencrypted tunnel" warning, which is how i found stunnel, and which is exactly what i need, just locally.

8 41

TPM based mutual tls authentication
by Nyiri, Gabor (Nokia - HU/Budapest) 07 Nov '23

07 Nov '23

Hi, Can you help me how to configure stunnel client to use TPM for mutual TLS authentication? I want to connect with mTLS to a remote server then make this connection available for localhost without mTLS. Thanks for your help in advance! Here is my configuration so far without TPM: debug = debug output = /tmp/stunnel.log foreground = yes [mtls_client] client = yes accept = 127.0.0.1:12019 sni = server-with-mtls.example.com checkHost = server-with-mtls.example.com connect = 1.2.3.4:443 verifyChain = yes CApath = /etc/ssl/certs/ cert = client.crt key = client.key Thanks & br, Gábor Nyíri,

2 1

Stunnel 4 failing to connect to gmail
by Asif Iqbal 11 Dec '20

11 Dec '20

I am faling to connect to gmail. Not sure what that bind error means. iqbala@ghar:~$ sudo stunnel4 2008.12.15 13:53:17 LOG7[3839:3083650736]: Snagged 64 random bytes from /home/iqbala/.rnd 2008.12.15 13:53:17 LOG7[3839:3083650736]: Wrote 1024 new random bytes to /home/iqbala/.rnd 2008.12.15 13:53:17 LOG7[3839:3083650736]: RAND_status claims sufficient entropy for the PRNG 2008.12.15 13:53:17 LOG7[3839:3083650736]: PRNG seeded successfully 2008.12.15 13:53:17 LOG7[3839:3083650736]: Certificate: /etc/stunnel/stunnel.pem 2008.12.15 13:53:17 LOG7[3839:3083650736]: Certificate loaded 2008.12.15 13:53:17 LOG7[3839:3083650736]: Key file: /etc/stunnel/stunnel.pem 2008.12.15 13:53:17 LOG7[3839:3083650736]: Private key loaded 2008.12.15 13:53:17 LOG7[3839:3083650736]: SSL context initialized for service ssmtp 2008.12.15 13:53:17 LOG5[3839:3083650736]: stunnel 4.22 on i486-pc-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007 2008.12.15 13:53:17 LOG5[3839:3083650736]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2008.12.15 13:53:17 LOG6[3839:3083650736]: file ulimit = 1024 (can be changed with 'ulimit -n') 2008.12.15 13:53:17 LOG6[3839:3083650736]: poll() used - no FD_SETSIZE limit for file descriptors 2008.12.15 13:53:17 LOG5[3839:3083650736]: 500 clients allowed 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 10 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 11 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 12 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: SO_REUSEADDR option set on accept socket 2008.12.15 13:53:17 LOG3[3839:3083650736]: Error binding ssmtp to 74.125.93.111:587 2008.12.15 13:53:17 LOG3[3839:3083650736]: bind: Cannot assign requested address (99) Here is how my conf file looks like iqbala@ghar:~$ cat /etc/stunnel/stunnel.conf | egrep -v "^;|^$" cert = /etc/stunnel/stunnel.pem foreground = yes sslVersion = SSLv3 chroot = /var/lib/stunnel4/ setuid = stunnel4 setgid = stunnel4 pid = /stunnel4.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = /var/log/stunnel4/stunnel.log client = yes [ssmtp] accept = smtp.gmail.com:587 connect = 25 Asif Iqbal PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu

5 9

Stunnel & Gmail security
by BOXI31 TEST 17 Oct '20

17 Oct '20

Hi all, To make "Stunnel 5.31" work with Gmail, I have to go in security settings of Gmail and "allow less secure apps to access my account". Is it mandatory ? Is it possible to set Stunnel to access Gmail without lowering it security level ? How ? I checked in log file TLS v1.2 is used by Stunnel but Gmail still consider it as a "less secure app." ! Regards, Steve

2 1

Windows Server 2003 issues with stunnel, TLS 1.2 on website(s)
by Sean Kelley 27 Feb '20

27 Feb '20

*Issue:* Old Windows Server cannot be upgraded, but needs TLS 1.2 encryption. Stunnel looks like a solution, but I'm having issues configuring it to work (It is "running" successfully with a pem file and port 442). In IIS Manager btw, the website SSL Port is set to 443. I've tried searching (i.e. google "site: https://www.stunnel.org/pipermail/stunnel-users/ server 2003") and have found a few leads, but nothing that addresses my issues in a way I understand. My ignorance I'm sure. *Server details:* * Windows Server 2003, Standard Edition, Service Pack 2 * IIS web server running 3 websites (ASP, PHP mix) * Valid Certificates from Lets Encrypt in Certificate Store * stunnel 5.49 (latest version I could find that works on 32bit OS's) sorry it's not the latest :( *Working Log with Port 442:* 2020.02.24 15:24:37 LOG7[main]: Running on Windows 5.2 2020.02.24 15:24:37 LOG7[main]: No limit detected for the number of clients 2020.02.24 15:24:37 LOG5[main]: stunnel 5.49 on x86-pc-msvc-1500 platform 2020.02.24 15:24:37 LOG5[main]: Compiled/running with OpenSSL 1.0.2p-fips 14 Aug 2018 2020.02.24 15:24:37 LOG5[main]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2020.02.24 15:24:37 LOG7[main]: errno: (*_errno()) 2020.02.24 15:24:37 LOG7[ui]: GUI message loop initialized 2020.02.24 15:24:37 LOG7[main]: Running on Windows 5.2 2020.02.24 15:24:37 LOG5[main]: Reading configuration from file stunnel.conf 2020.02.24 15:24:37 LOG5[main]: UTF-8 byte order mark detected 2020.02.24 15:24:37 LOG5[main]: FIPS mode disabled 2020.02.24 15:24:37 LOG7[main]: Compression disabled 2020.02.24 15:24:37 LOG7[main]: No PRNG seeding was required 2020.02.24 15:24:37 LOG6[main]: Initializing service [https] 2020.02.24 15:24:37 LOG7[main]: Ciphers: HIGH:!aNULL:!SSLv2:!DH:!kDHEPSK 2020.02.24 15:24:37 LOG7[main]: TLS options: 0x03004004 (+0x00004000, -0x00000000) 2020.02.24 15:24:37 LOG6[main]: Loading certificate from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG6[main]: Certificate loaded from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG6[main]: Loading private key from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG6[main]: Private key loaded from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG7[main]: Private key check succeeded 2020.02.24 15:24:37 LOG7[main]: ECDH initialization 2020.02.24 15:24:37 LOG7[main]: ECDH initialized with curve prime256v1 2020.02.24 15:24:37 LOG6[main]: Initializing service [domain] 2020.02.24 15:24:37 LOG7[main]: Ciphers: HIGH:!aNULL:!SSLv2:!DH:!kDHEPSK 2020.02.24 15:24:37 LOG7[main]: TLS options: 0x03014004 (+0x00014000, -0x00000000) 2020.02.24 15:24:37 LOG6[main]: Loading certificate from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG6[main]: Certificate loaded from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG6[main]: Loading private key from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG6[main]: Private key loaded from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG7[main]: Private key check succeeded 2020.02.24 15:24:37 LOG7[main]: ECDH initialization 2020.02.24 15:24:37 LOG7[main]: ECDH initialized with curve prime256v1 2020.02.24 15:24:37 LOG5[main]: Configuration successful 2020.02.24 15:24:37 LOG7[main]: Binding service [https] 2020.02.24 15:24:37 LOG7[main]: Listening file descriptor created (FD=292) 2020.02.24 15:24:38 LOG7[main]: Setting accept socket options (FD=292) 2020.02.24 15:24:38 LOG6[main]: Service [https] (FD=292) bound to 10.0.1.11:442 2020.02.24 15:24:38 LOG7[main]: Skipped SNI slave service [domain] 2020.02.24 15:24:38 LOG7[cron]: Cron thread initialized 2020.02.24 15:25:38 LOG6[cron]: Executing cron jobs 2020.02.24 15:25:38 LOG6[cron]: Cron jobs completed in 0 seconds 2020.02.24 15:25:38 LOG7[cron]: Waiting 86400 seconds *Log Error with port 443:* Binding service [https] to 10.0.1.11:443: Permission denied (WSAEACCES) (10013)* * *Conf:* ; Debugging stuff (may be useful for troubleshooting) debug = 7 ;output = stunnel.log ; TLS front-end to a web server [https] ; doesn't work with 443 below, works with 442 accept = 10.0.1.11:442 connect = 80 cert = C:\Program Files\stunnel\config\mywebsite.pem ; "TIMEOUTclose = 0" is a workaround for a design flaw in Microsoft SChannel ; Microsoft implementations do not use TLS close-notify alert and thus they ; are vulnerable to truncation attacks TIMEOUTclose = 0 [domain] sni = https:mywebsite.com sni = https:www.mywebsite.com cert = C:\Program Files\stunnel\config\mywebsite.pem ; connect = 80 connect = localhost:80 client = no sslVersion = TLSv1.2 -------------- Thanks, Sean

3 3

TLS connection not successful
by maktoob bareed 25 Feb '20

25 Feb '20

Hi I am trying to make TLS connection with a server that supports TLSv1.2. but each time I receive the following error: SSL_connect: ssl/record/ssl3_record.c:331: error:1408F10B:SSL routines:ssl3_get_record:wrong version number Here is my service configuration: sslVersion = TLSv1.2 options = NO_SSLv2 options = -NO_SSLv3 accept = 5512 connect = XXXXXXXXX client = yes

1 0

How to use SNI
by Paul Coshott 17 Feb '20

17 Feb '20

Hi Everyone, I have a single domain on my internet server, but it has 3 sub-domains. A separate web app runs off each one, but I need all 3 to be secured with https. I have the ssl certificates I need, but I don't know how to format the SNI section for all 3 sub-domains. The 3 domains and ports I need are : app1.pcapps.one:449 -> 127.0.0.1:8080 app2.pcapps.one:450 -> 127.0.0.1:81 app3.pcapps.one:451 -> 127.0.0.1:82 each domain has a certificate such as : cert = C:\httpscert\app1.pcapps.one.pfx Can anyone tell me how to write out the SNI section to get this working? Thanks, Paul

2 1

HTTP 404 if I don't add 127.0.0.1 in my /etc/hosts
by Masih Tavassoli 16 Feb '20

16 Feb '20

Hi Experts: I am trying to do http->https proxy for one site only: [example-proxy] client = yes accept = 127.0.0.1:5000 sni =integration-instance-idqxdofnz0ca-ia.integration.ocp.oraclecloud.com checkHost = integration-instance-idqxdofnz0ca-ia.integration.ocp.oraclecloud.com verifyPeer = yes verifyChain = yes connect = 147.154.19.235:443 CAfile = C:\Program Files (x86)\stunnel\config\ca-certs.pem If I add the following in /etc/hosts all works ok 127.0.0.1 integration-instance-idqxdofnz0ca-ia.integration.ocp.oraclecloud.com And then I have to use http://integration-instance-idqxdofnz0ca-ia.integration.ocp.oraclecloud.com… However, I just want this address to work: http://10.0.0.33:5000/ic/ws/integration/v1/flows/soap/SM_INT10_CREAT_EBS_GT… : isn’t the whole point of setting SNI to send servername on your behalf: 2020.02.15 00:46:59 LOG6[46]: SNI: sending servername: integration-instance-idqxdofnz0ca-ia.integration.ocp.oraclecloud.com 2020.02.15 00:46:59 LOG6[46]: Peer certificate required 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): before SSL initialization 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): SSLv3/TLS write client hello 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): SSLv3/TLS write client hello 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): SSLv3/TLS read server hello 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): SSLv3/TLS read change cipher spec 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): SSLv3/TLS read finished 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): SSLv3/TLS write change cipher spec 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): SSLv3/TLS write finished 2020.02.15 00:46:59 LOG7[46]: 3 client connect(s) requested 2020.02.15 00:46:59 LOG7[46]: 3 client connect(s) succeeded 2020.02.15 00:46:59 LOG7[46]: 0 client renegotiation(s) requested 2020.02.15 00:46:59 LOG7[46]: 2 session reuse(s) 2020.02.15 00:46:59 LOG6[46]: TLS connected: previous session reused 2020.02.15 00:46:59 LOG6[46]: TLSv1.2 ciphersuite: ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2020.02.15 00:46:59 LOG7[46]: Compression: null, expansion: null 2020.02.15 00:46:59 LOG6[46]: Session id: E003BBF100FA809D616B2F69E08BAF0119EA856FCEE6AD209BE95F7C5815380B 2020.02.15 00:48:05 LOG7[46]: TLS alert (read): warning: close notify 2020.02.15 00:48:05 LOG6[46]: TLS closed (SSL_read) What am I missing? Thanks Masi

1 0

How to pass URL parameters in connect to
by Shashank Shekhar 14 Feb '20

14 Feb '20

Hi, I am evaluating stunnel for a project. I want to translate a HTTP call to HTTPS. When I specify the URL to send to in the config file, I get error ""Unknown TCP service "443/api/path""". My config is as below: [https] client = yes accept = 4433 connect = myurl.com:443/api/path When I try the same thing without the sub-paths "/api/path" the connection works, but of course it doesn't hit the URL I want to hit. How do I achieve this? I tried going through the documentation, but couldn't figure it out. Any help will be greatly appreciated. Thank you, Shashank

2 1

Start stunnel services on Solaris
by Erick Alejandro Tovar Rebollo 11 Feb '20

11 Feb '20

Hi. I'm new on stunnel, and I don't know how I can start stunnel on Solaris 11 , with the stunnel version 5.56, I really need help. Thanks. Regards.

1 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users February 2020