August 2006 - stunnel-users

accept is not allowed in inetd mode
by vonom 22 Aug '06

22 Aug '06

Hello When i try to run stunnel by scripts or by hand stunnel /etc/stunnel/stunnel.conf (or other config) i see something like that: -bash-3.1# stunnel /etc/stunnel/pop3s.conf 2006.08.23 01:45:17 LOG7[24189:3083933376]: RAND_status claims sufficient entropy for the PRNG 2006.08.23 01:45:17 LOG6[24189:3083933376]: PRNG seeded successfully 2006.08.23 01:45:17 LOG7[24189:3083933376]: Certificate: /etc/stunnel/host-cert.pem 2006.08.23 01:45:17 LOG7[24189:3083933376]: Key file: /etc/stunnel/host-key.pem 2006.08.23 01:45:17 LOG7[24189:3083933376]: SSL context initialized for service stunnel file /etc/stunnel/pop3s.conf line 64: accept is not allowed in inetd mode No stunnel sesion, open ports or anything. I was very happy when I find out that I have stunnel-inetd-4.15-1 in my disto and it runs and ports are open. Everything great but when i try to send or receive email (postfix) it dont work. I spend a lot of time and a while ago i write telnet localhost 465 (or 995), ehlo hostname and see: -bash-3.1# telnet localhost 465 Trying 127.0.0.1.465... Connected to localhost. Escape character is '^]'. 2006.08.23 01:56:20 LOG7[24343:3083708096]: RAND_status claims sufficient entropy for the PRNG 2006.08.23 01:56:20 LOG6[24343:3083708096]: PRNG seeded successfully 2006.08.23 01:56:20 LOG7[24343:3083708096]: Certificate: /etc/stunnel/host-cert.pem 2006.08.23 01:56:20 LOG7[24343:3083708096]: Key file: /etc/stunnel/host-key.pem 2006.08.23 01:56:20 LOG7[24343:3083708096]: SSL context initialized for service stunnel file /etc/stunnel/smtps.conf line 64: accept is not allowed in inetd mode Connection closed by foreign host. When I write telnet localhost 25 -bash-3.1# telnet localhost 25 Trying 127.0.0.1.25... Connected to localhost. Escape character is '^]'. 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250 8BITMIME So It's OK I think. file /etc/stunnel/smtps.conf line 64: accept is not allowed in inetd mode Connection closed by foreign host. -line 64 point just last line of config file. I have no idea what it could be. Anyone know how to fix that?

2 1

Protocol using Connect
by Hutchison, Alan 21 Aug '06

21 Aug '06

I am trying to use the protocol entries in the config file as shown below (xyz substituted to protect employer & vendor). Below is the log. Stunnel abends as it is trying to authenticate to our corporate proxy. The network guys are seeing the attempt to authenticate but it does not appear to complete. Any thoughts? key=maxstpb.crt debug=7 output=stunnel.log client=yes [MarketAxess] accept=127.0.0.1:12345 delay=yes TIMEOUTbusy=120 TIMEOUTconnect=120 connect=xyz.xyz.com:80 protocol=connect protocolHost=xyz.xyz.com:443 protocolCredentials=xyz:xyz 2006.08.21 15:13:24 LOG5[2520:1312]: stunnel 4.15 on x86-pc-mingw32-gnu with OpenSSL 0.9.7i 14 Oct 2005 2006.08.21 15:13:24 LOG5[2520:1312]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv4 2006.08.21 15:13:24 LOG5[2520:3184]: No limit detected for the number of clients 2006.08.21 15:13:24 LOG7[2520:3184]: FD 192 in non-blocking mode 2006.08.21 15:13:24 LOG7[2520:3184]: SO_REUSEADDR option set on accept socket 2006.08.21 15:13:24 LOG7[2520:3184]: MarketAxess bound to 127.0.0.1:12345 2006.08.21 15:14:00 LOG7[2520:3184]: MarketAxess accepted FD=200 from 127.0.0.1:4200 2006.08.21 15:14:00 LOG7[2520:3184]: Creating a new thread 2006.08.21 15:14:00 LOG7[2520:3184]: New thread created 2006.08.21 15:14:00 LOG7[2520:2560]: MarketAxess started 2006.08.21 15:14:00 LOG7[2520:2560]: FD 200 in non-blocking mode 2006.08.21 15:14:00 LOG5[2520:2560]: MarketAxess connected from 127.0.0.1:4200 2006.08.21 15:14:00 LOG7[2520:2560]: FD 416 in non-blocking mode 2006.08.21 15:14:00 LOG7[2520:2560]: MarketAxess connecting xyz.xyz.xyz.xyz:80 2006.08.21 15:14:00 LOG7[2520:2560]: connect_wait: waiting 120 seconds 2006.08.21 15:14:00 LOG7[2520:2560]: connect_wait: connected 2006.08.21 15:14:00 LOG7[2520:2560]: Remote FD=416 initialized 2006.08.21 15:14:00 LOG5[2520:2560]: Negotiations for connect (client side) started 2006.08.21 15:14:00 LOG7[2520:2560]: -> CONNECT xyz.xyz.com:443 HTTP/1.1 Alan R. Hutchison 515-362-1272 -----Message Disclaimer----- This e-mail message is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by reply email to Connect(a)principal.com and delete or destroy all copies of the original message and attachments thereto. Email sent to or from the Principal Financial Group or any of its member companies may be retained as required by law or regulation. Nothing in this message is intended to constitute an Electronic signature for purposes of the Uniform Electronic Transactions Act (UETA) or the Electronic Signatures in Global and National Commerce Act ("E-Sign") unless a specific statement to the contrary is included in this message. While this communication may be used to promote or market a transaction or an idea that is discussed in the publication, it is intended to provide general information about the subject matter covered and is provided with the understanding that The Principal is not rendering legal, accounting, or tax advice. It is not a marketed opinion and may not be used to avoid penalties under the Internal Revenue Code. You should consult with appropriate counsel or other advisors on all matters pertaining to legal, tax, or accounting obligations and requirements.

1 0

limit connections per certificate
by Eric H. Jung 14 Aug '06

14 Aug '06

Hi, I'd like to limit the number of connections to stunnel (in server mode) by client certificate. In other words, I want all clients to only have 1 open socket connection to the server at a time. Is this possible with stunnel out-of-the-box, or must I write a patch to handle it? Thank you, grimholtz

1 0

stunnel through xinetd: process not terminating after use
by Alex Forrow 07 Aug '06

07 Aug '06

Hi, Im using stunnel through xinetd to forward some local unencrypted ldap connections to our ssl ldap server. Seems to work ok but after each use the stunnel process does not terminate, so I end up with losts of processes not doing anything. After a few days, these processes reach a limit and connections fail. As you can see, the connection has finished, but the process still exists: [root@lynx stunnel]# ps -e | grep stunnel 2396 ? 00:00:00 stunnel 2517 ? 00:00:00 stunnel 2575 ? 00:00:00 stunnel 2576 ? 00:00:00 stunnel [root@lynx stunnel]# netstat -p | grep stunnel tcp 0 0 lynx.seekit.co.uk:ldaplo lynx.seekit.co.uk:60390 CLOSE_WAIT 2396/stunnel unix 2 [ ] DGRAM 3204569 2576/stunnel unix 2 [ ] DGRAM 3204562 2575/stunnel unix 2 [ ] DGRAM 3203127 2517/stunnel unix 2 [ ] DGRAM 3202108 2396/stunnel Heres the xinetd configuration for stunnel (/etc/xinetd.d/ldaplo): # default: on # description: Stunnel to connect to LDAP for an insecure local session service ldaplo { disable = no #flags = REUSE port = 390 socket_type = stream wait = no user = nobody server = /usr/sbin/stunnel server_args = /etc/stunnel/ldap.conf # log_on_failure += USERID } Heres the stunnel configuration file (/etc/stunnel/ldap.conf): client = yes connect = 636 Cheers, Alex Forrow

1 0

Stunnel without certificates
by Shane 03 Aug '06

03 Aug '06

Hi, I am new to this group and also to Stunnel utility. I would like to use Stunnel to secure my http connections. Here is a twist. I just want to encrypt the link and don't bother much about the authentication. 1. Can I use Stunnel without certificates? 2. If certificate is mandatory, can I use only the file which contains "keys" but not use other authentication credentials? 3. Can I use anonymous DH Ciphers so that authentication phase is assumed done and both client and servers generate the keys? Any help and guidance will useful. Thanks, -Ravi Joshi __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

TIMEOUTbusy
by Martin Beauchamp 02 Aug '06

02 Aug '06

Hi List, I'm running Stunnel 4.15 under win32 in client mode. Can someone give me a better idea about what TIMEOUTbusy does? The docs state that it is "time to wait for expected data." But what does Stunnel do after this period? Does it disconnect from the remote server? Does it attempt another SSL session after some interval? Thanks for any addition information! Martin -- Martín Beauchamp Systems Engineer Park Slope Food Coop, Inc. (718) 783-2187 (718) 622-5685 Fax

1 0