- stunnel-users - stunnel.org

Re: [stunnel-users] Re (2): Problems with stunnel and cox.net on Windows 7
by Phil Smith III 18 Jan '18

18 Jan '18

Now that's interesting. Note that the failed nslookup looked v6-ish. I wonder if Cox is doing some v6 stuff that I don't know about! -----Original Message----- From: stunnel-users [mailto:[email protected]] On Behalf Of Vincent Deschenes Sent: Thursday, January 18, 2018 1:17 PM To: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] Re (2): Problems with stunnel and cox.net on Windows 7 >From my experience, this relates to IPv4 vs IPv6. 127.0.0.1 is explicitly V4. While localhost can be V6. Vincent Deschenes -----Original Message----- From: stunnel-users [mailto:[email protected]] On Behalf Of peter(a)easthope.ca Sent: Thursday, 18 January 2018 1:08 PM To: stunnel-users(a)stunnel.org Subject: [stunnel-users] Re (2): Problems with stunnel and cox.net on Windows 7 From: "Phil Smith III" <phs3stuff(a)cox.net> Date: Thu, 18 Jan 2018 12:47:47 -0500 > while the output= wasn't accepted (it said it wasn't valid there), Does the file exist? If not, can stunnel create it? Can you read it with an editor. Can you write into it interactively? > changing 127.0.0.1 to localhost seems to have fixed it! What does "nslookup localhost" report? Regards, ... P. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757 http://easthope.ca/Peter.html Bcc: peter at easthope. ca _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

1 0

Re: [stunnel-users] Re (2): Problems with stunnel and cox.net on Windows 7
by Phil Smith III 18 Jan '18

18 Jan '18

Huh. It does have it. But why didn’t 127.0.0.1 work, I wonder? From: stunnel-users [mailto:[email protected]] On Behalf Of Carter Browne Sent: Thursday, January 18, 2018 2:11 PM To: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] Re (2): Problems with stunnel and cox.net on Windows 7 You should check your hosts file in \windows\system32\drivers\etc. Make sure it has an entry: 127.0.0.1 localhost The text claims it doesn't need it, but it doesn't hurt to have it, and I'm not sure I totally believe the text. Carter On 1/18/2018 1:55 PM, Phil Smith III wrote: Oh, the logging works--it just doesn't like it there in the file. I have it earlier and it's fine. -------------- C:\Users\phsiii>ls -ld \temp\stunnel-log.txt -rw-r--r-- 1 phsiii None 266835 Jan 18 08:52 \temp\stunnel-log.txt # That's Cygwin ls -- remember, this is Windows 7 C:\Users\phsiii>nslookup localhost Server: UnKnown Address: 2001:4860:4860::8888 *** UnKnown can't find localhost: No response from server # Windows nslookup (per "which nslookup") -------------- Odd. -----Original Message----- From: stunnel-users [mailto:[email protected]] On Behalf Of peter(a)easthope.ca <mailto:[email protected]> Sent: Thursday, January 18, 2018 1:13 PM To: stunnel-users(a)stunnel.org <mailto:[email protected]> Subject: [stunnel-users] Re (2): Problems with stunnel and cox.net on Windows 7 From: "Phil Smith III" <mailto:[email protected]> <phs3stuff(a)cox.net> Date: Thu, 18 Jan 2018 12:47:47 -0500 while the output= wasn't accepted (it said it wasn't valid there), Does the file exist? If not, can stunnel create it? Can you read it with an editor. Can you write into it interactively? What does "ls -ld C:\temp\stunnel-log.txt" or Win equivalent give? changing 127.0.0.1 to localhost seems to have fixed it! What does "nslookup localhost" report? Regards, ... P.

1 0

Re: [stunnel-users] Re (2): Problems with stunnel and cox.net on Windows 7
by Phil Smith III 18 Jan '18

18 Jan '18

Oh, the logging works--it just doesn't like it there in the file. I have it earlier and it's fine. -------------- C:\Users\phsiii>ls -ld \temp\stunnel-log.txt -rw-r--r-- 1 phsiii None 266835 Jan 18 08:52 \temp\stunnel-log.txt # That's Cygwin ls -- remember, this is Windows 7 C:\Users\phsiii>nslookup localhost Server: UnKnown Address: 2001:4860:4860::8888 *** UnKnown can't find localhost: No response from server # Windows nslookup (per "which nslookup") -------------- Odd. -----Original Message----- From: stunnel-users [mailto:[email protected]] On Behalf Of peter(a)easthope.ca Sent: Thursday, January 18, 2018 1:13 PM To: stunnel-users(a)stunnel.org Subject: [stunnel-users] Re (2): Problems with stunnel and cox.net on Windows 7 From: "Phil Smith III" <phs3stuff(a)cox.net> Date: Thu, 18 Jan 2018 12:47:47 -0500 > while the output= wasn't accepted (it said it wasn't valid there), Does the file exist? If not, can stunnel create it? Can you read it with an editor. Can you write into it interactively? What does "ls -ld C:\temp\stunnel-log.txt" or Win equivalent give? > changing 127.0.0.1 to localhost seems to have fixed it! What does "nslookup localhost" report? Regards, ... P. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757 http://easthope.ca/Peter.html Bcc: peter at easthope. ca _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

2 1

Re (2): Problems with stunnel and cox.net on Windows 7
by peter＠easthope.ca 18 Jan '18

18 Jan '18

From: "Phil Smith III" <phs3stuff(a)cox.net> Date: Thu, 18 Jan 2018 12:47:47 -0500 > while the output= wasn't accepted (it said it wasn't valid there), Does the file exist? If not, can stunnel create it? Can you read it with an editor. Can you write into it interactively? > changing 127.0.0.1 to localhost seems to have fixed it! What does "nslookup localhost" report? Regards, ... P. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757 http://easthope.ca/Peter.html Bcc: peter at easthope. ca

2 1

Re (2): Problems with stunnel and cox.net on Windows 7
by peter＠easthope.ca 18 Jan '18

18 Jan '18

From: "Phil Smith III" <phs3stuff(a)cox.net> Date: Thu, 18 Jan 2018 12:47:47 -0500 > while the output= wasn't accepted (it said it wasn't valid there), Does the file exist? If not, can stunnel create it? Can you read it with an editor. Can you write into it interactively? What does "ls -ld C:\temp\stunnel-log.txt" or Win equivalent give? > changing 127.0.0.1 to localhost seems to have fixed it! What does "nslookup localhost" report? Regards, ... P. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757 http://easthope.ca/Peter.html Bcc: peter at easthope. ca

1 0

Re: [stunnel-users] Problems with stunnel and cox.net on Windows 7
by Phil Smith III 18 Jan '18

18 Jan '18

Well, I'm stunned (pun intended): while the output= wasn't accepted (it said it wasn't valid there), changing 127.0.0.1 to localhost seems to have fixed it! -----Original Message----- From: stunnel-users [mailto:[email protected]] On Behalf Of peter(a)easthope.ca Sent: Thursday, January 18, 2018 12:20 AM To: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] Problems with stunnel and cox.net on Windows 7 From: "Phil Smith III" <phs3stuff(a)cox.net> Date: Wed, 17 Jan 2018 21:59:42 -0500 > Here's my stunnel.conf, with blank lines and comments removed: > client = yes > output = C:\temp\stunnel-log.txt > taskbar = yes > debug = 7 > [POP3 Incoming] > protocol = pop3 > accept = 127.0.0.1:1110 > connect = pop.cox.net:995 > protocol = smtp > accept = 127.0.0.1:25 > connect = smtp.cox.net:465 Here it worked for POP3 immediately. Not needed for SMTP. https://en.wikibooks.org/wiki/Oberon/Oberon#Receiving_and_Sending_Email Before using 1110, check. netstat -tulpn | grep 1110 Correct id, passwd and port are in the MUA? Separate configurations for POP3 and SMTP. Troubleshoot one at a time. "protocol" shouldn't be necessary. Try this. [POP3] client = yes output = C:\temp\stunnel-log.txt accept = localhost:1110 connect = pop.cox.net:995 Regards, ... Peter E. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757 http://easthope.ca/Peter.html Bcc: peter at easthope. ca _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

1 0

Re (2): Problems with stunnel and cox.net on Windows 7
by peter＠easthope.ca 18 Jan '18

18 Jan '18

From: Andrew Culver <aculver(a)uwo.ca> Date: Thu, 18 Jan 2018 11:39:20 -0500 > Some protocols use a protocol-specific command to begin TLS negotiation > (STARTTLS for SMTP and POP3), so stunnel needs to know how (and be told) to > use that command. Phil, General troubleshooting rule, always try for a most elementary, ordinary case before resorting to a special case. Regards, ... Peter E. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757 http://easthope.ca/Peter.html Bcc: peter at easthope. ca

1 0

Re: [stunnel-users] Problems with stunnel and cox.net on Windows 7
by peter＠easthope.ca 18 Jan '18

18 Jan '18

P.s. From: "Phil Smith III" <phs3stuff(a)cox.net> Date: Wed, 17 Jan 2018 21:59:42 -0500 > protocol = pop3 The stunnel(8) manual has this. "protocol = PROTO application protocol to negotiate TLS This option enables initial, protocol-specific negotiation of the TLS encryption." Is there any need for protocol-specific negotiation? Why? Stunnel provides a tunnel and POP3 works inside. That's all. Try the configuration without the protocol option. Regards, ... Peter E. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757 http://easthope.ca/Peter.html Bcc: peter at easthope. ca

2 1

Re: [stunnel-users] Problems with stunnel and cox.net on Windows 7
by Phil Smith III 18 Jan '18

18 Jan '18

Right, I had done that: >Yes, I have protocol = pop3 and protocol = smtp; I’ve tried >commenting them out individually, no change that I can see. The doc really isn't clear about why you'd want/need these, by the way. But your earlier suggestion (localhost instead of 127.0.0.1) seems to have worked. Still a mystery. I'll be tinkering on machine2 tonight, and then will try on the wife's machine! -----Original Message----- From: stunnel-users [mailto:[email protected]] On Behalf Of peter(a)easthope.ca Sent: Thursday, January 18, 2018 9:51 AM To: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] Problems with stunnel and cox.net on Windows 7 P.s. From: "Phil Smith III" <phs3stuff(a)cox.net> Date: Wed, 17 Jan 2018 21:59:42 -0500 > protocol = pop3 The stunnel(8) manual has this. "protocol = PROTO application protocol to negotiate TLS This option enables initial, protocol-specific negotiation of the TLS encryption." Is there any need for protocol-specific negotiation? Why? Stunnel provides a tunnel and POP3 works inside. That's all. Try the configuration without the protocol option. Regards, ... Peter E. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757 http://easthope.ca/Peter.html Bcc: peter at easthope. ca _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

1 0

Re: [stunnel-users] Problems with stunnel and cox.net on Windows 7
by peter＠easthope.ca 18 Jan '18

18 Jan '18

From: "Phil Smith III" <phs3stuff(a)cox.net> Date: Wed, 17 Jan 2018 21:59:42 -0500 > Here's my stunnel.conf, with blank lines and comments removed: > client = yes > output = C:\temp\stunnel-log.txt > taskbar = yes > debug = 7 > [POP3 Incoming] > protocol = pop3 > accept = 127.0.0.1:1110 > connect = pop.cox.net:995 > protocol = smtp > accept = 127.0.0.1:25 > connect = smtp.cox.net:465 Here it worked for POP3 immediately. Not needed for SMTP. https://en.wikibooks.org/wiki/Oberon/Oberon#Receiving_and_Sending_Email Before using 1110, check. netstat -tulpn | grep 1110 Correct id, passwd and port are in the MUA? Separate configurations for POP3 and SMTP. Troubleshoot one at a time. "protocol" shouldn't be necessary. Try this. [POP3] client = yes output = C:\temp\stunnel-log.txt accept = localhost:1110 connect = pop.cox.net:995 Regards, ... Peter E. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757 http://easthope.ca/Peter.html Bcc: peter at easthope. ca

1 0