- stunnel-users - stunnel.org

Re: [stunnel-users] stunnel 5.43 released
by Ian Bamforth 07 Nov '17

07 Nov '17

Hi, I'm having trouble installing the new release on Ubuntu 14.04. The command I'm running is: execute ./configure --with-ssl=/usr/local/openssl-1.1.0g && make && make check && sudo make install I get this output: 15:13:06 stunnel 5.43 on x86_64-pc-linux-gnu platform 15:13:06 Compiled/running with OpenSSL 1.1.0g 2 Nov 2017 15:13:06 Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 15:13:06 15:13:06 test 010_require_cert ok 15:13:06 test 011_verify_peer ok 15:13:06 test 012_verify_chain ok 15:13:06 test 013_CRL_file failed 15:13:06 error logs logs/013_CRL_file.log 15:13:06 test 014_PSK_secrets ok 15:13:06 test 015_p12_cert ok 15:13:06 test 020_IPv6 skipped 15:13:06 test 021_FIPS skipped 15:13:06 test 030_simple_execute ok 15:13:06 test 031_redirect ok 15:13:06 test 032_no_redirect ok 15:13:06 test 033_redirect_exec ok 15:13:06 test 034_no_redirect_exec ok 15:13:06 test 035_SNI ok 15:13:06 test 036_no_SNI ok 15:13:06 test 037_failover_prio1 failed 15:13:06 error logs logs/037_failover_prio1.log 15:13:06 test 038_failover_prio2 failed 15:13:06 error logs logs/038_failover_prio2.log 15:13:06 test 039_failover_rr ok 15:13:06 test 040_reload ok 15:13:06 test 110_failure_require_cert ok 15:13:06 test 111_failure_verify_peer ok 15:13:06 test 112_failure_verify_chain ok 15:13:06 test 113_failure_CRL_file ok 15:13:06 test 114_failure_PSK_secrets ok 15:13:06 test 120_failure_no_cert ok 15:13:06 test 121_failure_wrong_config ok 15:13:06 summary: success 21, skip 2, fail 3 15:13:06 ./make_test finished 15:13:06 make[2]: Leaving directory `/opt/stunnel/stunnel-5.43/tests' 15:13:06 make[1]: Leaving directory `/opt/stunnel/stunnel-5.43/tests' 15:13:06 STDERR: make[2]: *** [check-local] Error 1 15:13:06 make[1]: *** [check-am] Error 2 15:13:06 make: *** [check-recursive] Error 1 15:13:06 ---- End output of ./configure --with-ssl=/usr/local/openssl-1.1.0g && make && make check && sudo make install ---- 15:13:06 Ran ./configure --with-ssl=/usr/local/openssl-1.1.0g && make && make check && sudo make install returned 2 This was working until the new release (we were on 5.42), is there some change required? Regards, Ian Bamforth Senior Software Engineer Operations & Planning Systems Division W: www.tracsis.com www.tracsisops.com Tracsis plc Leeds Innovation Centre 103 Clarendon Road Leeds LS2 9DF Tracsis Operations and Planning Systems Division is a Division of Tracsis plc and comprises Tracsis plc (05019106), Tracsis Rail Consultancy Limited (05047148), Safety Information Systems Limited trading as COMPASS (02588404) and Tracsis Retail and Operations Limited (04225250), all subsidiaries of Tracsis plc with a registered office at Leeds Innovation Centre,103 Clarendon Road, Leeds, LS2 9DF. VAT Registration No: 945 7876 61. This email and its attachments may be confidential and are intended solely for the use of the individual(s) to whom it is addressed. If you are not the intended recipient of this email and its attachments, you must take no action based upon them, nor must you copy or show them to anyone. Please contact the sender if you believe you have received this email in error. -----Original Message----- From: stunnel-users [mailto:[email protected]] On Behalf Of Michal Trojnara Sent: 05 November 2017 23:03 To: stunnel-users(a)stunnel.org; stunnel-announce(a)stunnel.org; openssl-users(a)openssl.org Subject: [stunnel-users] stunnel 5.43 released Dear Users, I have released version 5.43 of stunnel. Version 5.43, 2017.11.05, urgency: LOW * New features - OpenSSL DLLs updated to version 1.0.2m. - Android build updated to OpenSSL 1.1.0g. - Allow for multiple "accept" ports per section. - Self-test framework (make check). - Added config load before OpenSSL init (thx to Dmitrii Pichulin). - OpenSSL 1.1.0 support for Travis CI. - OpenSSL 1.1.1-dev compilation fixes. * Bugfixes - Fixed a memory fault on Solaris. - Fixed round-robin failover in the FORK threading model. - Fixed handling SSL_ERROR_ZERO_RETURN in SSL_shutdown(). - Minor fixes of the logging subsystem. Home page: https://www.stunnel.org/ Download: https://www.stunnel.org/downloads.html SHA-256 hashes: 05915babf705a0494886a72a7367913d403d07fc908ebb7b380d639e2d8bcee2 stunnel-5.43.tar.gz 5249479d295f482ecac9cd3d5c89c0e5d41ae6ff8e265d4634ecfd8761834201 stunnel-5.43-win32-installer.exe e628fa7027d19bf4f0a62392f9dc042d97959498c292e13ebdf30c65a545dd6d stunnel-5.43-android.zip Best regards, Mike

1 0

Web browsing over stunnel
by Osvald Brko 02 Nov '17

02 Nov '17

Hello, I try to use stunnel for web browsing (https), and I am not successful. (While mail client against IMAP server works fine). Can anybody give me a hint what to try? The situation: Windows XP SP3, MSIE 8 (or Firefox 43.0.1. for check), stunnel 5.42 stunnel.conf : debug = 7 [https_test] client = yes accept = 127.0.0.1:8888 connect = www.stunnel.org:443 http://127.0.0.1:8888/ -> Error HTTP 404 Not Found 2017.11.02 13:01:50 LOG7[main]: Running on Windows 5.1 2017.11.02 13:01:50 LOG7[main]: No limit detected for the number of clients 2017.11.02 13:01:50 LOG5[main]: stunnel 5.42 on x86-pc-msvc-1500 platform 2017.11.02 13:01:50 LOG5[main]: Compiled/running with OpenSSL 1.0.2l-fips 25 May 2017 2017.11.02 13:01:50 LOG5[main]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2017.11.02 13:01:50 LOG7[main]: errno: (*_errno()) 2017.11.02 13:01:50 LOG7[ui]: GUI message loop initialized 2017.11.02 13:01:50 LOG7[main]: Running on Windows 5.1 2017.11.02 13:01:50 LOG5[main]: Reading configuration from file stunnel.conf 2017.11.02 13:01:50 LOG5[main]: UTF-8 byte order mark detected 2017.11.02 13:01:50 LOG5[main]: FIPS mode disabled 2017.11.02 13:01:50 LOG7[main]: Compression disabled 2017.11.02 13:01:50 LOG7[main]: PRNG seeded successfully 2017.11.02 13:01:50 LOG6[main]: Initializing service [XXXXXX-imap] 2017.11.02 13:01:50 LOG7[main]: Ciphers: HIGH:!DH:!aNULL:!SSLv2 2017.11.02 13:01:50 LOG7[main]: TLS options: 0x03000004 (+0x03000000, -0x00000000) 2017.11.02 13:01:50 LOG7[main]: No certificate or private key specified 2017.11.02 13:01:50 LOG6[main]: Initializing service [https_test] 2017.11.02 13:01:50 LOG7[main]: Ciphers: HIGH:!DH:!aNULL:!SSLv2 2017.11.02 13:01:50 LOG7[main]: TLS options: 0x03000004 (+0x03000000, -0x00000000) 2017.11.02 13:01:50 LOG7[main]: No certificate or private key specified 2017.11.02 13:01:50 LOG4[main]: Service [https_test] needs authentication to prevent MITM attacks 2017.11.02 13:01:50 LOG5[main]: Configuration successful 2017.11.02 13:01:50 LOG7[main]: Listening file descriptor created (FD=236) 2017.11.02 13:01:50 LOG7[main]: Service [XXXXXX-imap] (FD=236) bound to 127.0.0.1:143 2017.11.02 13:01:50 LOG7[main]: Listening file descriptor created (FD=260) 2017.11.02 13:01:50 LOG7[main]: Service [https_test] (FD=260) bound to 127.0.0.1:8888 2017.11.02 13:01:50 LOG7[cron]: Cron thread initialized 2017.11.02 13:02:11 LOG7[main]: Found 1 ready file descriptor(s) 2017.11.02 13:02:11 LOG7[main]: FD=236 ifds=r-x ofds=--- 2017.11.02 13:02:11 LOG7[main]: FD=248 ifds=r-x ofds=--- 2017.11.02 13:02:11 LOG7[main]: Service [https_test] accepted (FD=304) from 127.0.0.1:3424 2017.11.02 13:02:11 LOG7[main]: Creating a new thread 2017.11.02 13:02:11 LOG7[main]: New thread created 2017.11.02 13:02:11 LOG7[0]: Service [https_test] started 2017.11.02 13:02:11 LOG7[0]: Option TCP_NODELAY set on local socket 2017.11.02 13:02:11 LOG5[0]: Service [https_test] accepted connection from 127.0.0.1:3424 2017.11.02 13:02:11 LOG6[0]: s_connect: connecting 207.192.69.165:443 2017.11.02 13:02:11 LOG7[0]: s_connect: s_poll_wait 207.192.69.165:443: waiting 10 seconds 2017.11.02 13:02:11 LOG5[0]: s_connect: connected 207.192.69.165:443 2017.11.02 13:02:11 LOG5[0]: Service [https_test] connected remote server from XX.XXX.XXX.XXX:3425 2017.11.02 13:02:11 LOG7[0]: Option TCP_NODELAY set on remote socket 2017.11.02 13:02:11 LOG7[0]: Remote descriptor (FD=320) initialized 2017.11.02 13:02:11 LOG6[0]: SNI: sending servername: www.stunnel.org 2017.11.02 13:02:11 LOG6[0]: Peer certificate not required 2017.11.02 13:02:11 LOG7[0]: TLS state (connect): before/connect initialization 2017.11.02 13:02:11 LOG7[0]: TLS state (connect): SSLv2/v3 write client hello A 2017.11.02 13:02:11 LOG7[0]: TLS state (connect): SSLv3 read server hello A 2017.11.02 13:02:11 LOG6[0]: Certificate verification disabled 2017.11.02 13:02:11 LOG6[0]: Certificate verification disabled 2017.11.02 13:02:11 LOG6[0]: Certificate verification disabled 2017.11.02 13:02:11 LOG6[0]: Certificate verification disabled 2017.11.02 13:02:11 LOG6[0]: Certificate verification disabled 2017.11.02 13:02:11 LOG7[0]: TLS state (connect): SSLv3 read server certificate A 2017.11.02 13:02:11 LOG7[0]: TLS state (connect): SSLv3 read server key exchange A 2017.11.02 13:02:11 LOG6[0]: Client certificate not requested 2017.11.02 13:02:11 LOG7[0]: TLS state (connect): SSLv3 read server done A 2017.11.02 13:02:11 LOG7[0]: TLS state (connect): SSLv3 write client key exchange A 2017.11.02 13:02:11 LOG7[0]: TLS state (connect): SSLv3 write change cipher spec A 2017.11.02 13:02:11 LOG7[0]: TLS state (connect): SSLv3 write finished A 2017.11.02 13:02:11 LOG7[0]: TLS state (connect): SSLv3 flush data 2017.11.02 13:02:11 LOG7[0]: TLS state (connect): SSLv3 read server session ticket A 2017.11.02 13:02:11 LOG7[0]: TLS state (connect): SSLv3 read finished A 2017.11.02 13:02:11 LOG7[0]: 1 client connect(s) requested 2017.11.02 13:02:11 LOG7[0]: 1 client connect(s) succeeded 2017.11.02 13:02:11 LOG7[0]: 0 client renegotiation(s) requested 2017.11.02 13:02:11 LOG7[0]: 0 session reuse(s) 2017.11.02 13:02:11 LOG6[0]: TLS connected: new session negotiated 2017.11.02 13:02:11 LOG7[0]: Peer certificate was cached (7519 bytes) 2017.11.02 13:02:11 LOG6[0]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2017.11.02 13:02:11 LOG7[0]: Compression: null, expansion: null 2017.11.02 13:02:16 LOG7[0]: TLS alert (read): warning: close notify 2017.11.02 13:02:16 LOG6[0]: TLS closed (SSL_read) 2017.11.02 13:02:16 LOG7[0]: Sent socket write shutdown 2017.11.02 13:02:21 LOG3[0]: readsocket: Connection reset by peer (WSAECONNRESET) (10054) 2017.11.02 13:02:21 LOG5[0]: Connection reset: 565 byte(s) sent to TLS, 399 byte(s) sent to socket 2017.11.02 13:02:21 LOG7[0]: Remote descriptor (FD=320) closed 2017.11.02 13:02:21 LOG7[0]: Local descriptor (FD=304) closed 2017.11.02 13:02:21 LOG7[0]: Service [https_test] finished (0 left) 2017.11.02 13:02:50 LOG6[cron]: Executing cron jobs 2017.11.02 13:02:50 LOG6[cron]: Cron jobs completed in 0 seconds 2017.11.02 13:02:50 LOG7[cron]: Waiting 86400 seconds

1 0

Problem: eMail over SMTP on port 587 accepted without error but not forwarded
by Ben Stover 02 Nov '17

02 Nov '17

After a long time of successful usage of stunnel on a Windows 7 system I experienced now permanent problems with sending messages from my local email client over stunnel + SMTP to the remote smtp-server on port 587. Again: my local client+stunnel setup is/was untouched. When I send now messages to remote port 587 (as before) they are silently accepted but NOT forwarded to the final destination. No error messages was returned. The only thing I could imagine is that the webhoster changed the mail server certificate. How does stunnel handle this scenario? Do I have to tell stunnel that the remote certificate changed? how? Receiving eMails through POP3 on port 995 works. WebHoster has no clue what the reason is. The (anonymized) log below shows the transfer Any help is welcomed. Thank you Peter 2017.11.02 13:03:51 LOG7[main]: Found 1 ready file descriptor(s) 2017.11.02 13:03:51 LOG7[main]: FD=388 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=464 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=468 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=472 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=476 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=480 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=484 ifds=r-x ofds=r-- 2017.11.02 13:03:51 LOG7[main]: FD=488 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=492 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=496 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=500 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=504 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=508 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=512 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=516 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=520 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=524 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: FD=528 ifds=r-x ofds=--- 2017.11.02 13:03:51 LOG7[main]: Service [mail-smtp] accepted (FD=904) from 127.0.0.1:47872 2017.11.02 13:03:51 LOG7[main]: Creating a new thread 2017.11.02 13:03:51 LOG7[main]: New thread created 2017.11.02 13:03:51 LOG7[537]: Service [mail-smtp] started 2017.11.02 13:03:51 LOG7[537]: Option TCP_NODELAY set on local socket 2017.11.02 13:03:51 LOG5[537]: Service [mail-smtp] accepted connection from 127.0.0.1:47872 2017.11.02 13:03:51 LOG6[537]: s_connect: connecting 195.54.77.83:587 2017.11.02 13:03:51 LOG7[537]: s_connect: s_poll_wait 195.54.77.83:587: waiting 10 seconds 2017.11.02 13:03:51 LOG5[537]: s_connect: connected 195.54.77.83:587 2017.11.02 13:03:51 LOG5[537]: Service [mail-smtp] connected remote server from 192.168.0.10:47873 2017.11.02 13:03:51 LOG7[537]: Option TCP_NODELAY set on remote socket 2017.11.02 13:03:51 LOG7[537]: Remote descriptor (FD=876) initialized 2017.11.02 13:03:51 LOG7[537]: <- 220 foobar.testserver.com ESMTP Postfix 2017.11.02 13:03:51 LOG7[537]: -> 220 foobar.testserver.com ESMTP Postfix 2017.11.02 13:03:51 LOG7[537]: -> EHLO localhost 2017.11.02 13:03:51 LOG7[537]: <- 250-foobar.testserver.com 2017.11.02 13:03:51 LOG7[537]: <- 250-PIPELINING 2017.11.02 13:03:51 LOG7[537]: <- 250-SIZE 104857600 2017.11.02 13:03:51 LOG7[537]: <- 250-ETRN 2017.11.02 13:03:51 LOG7[537]: <- 250-STARTTLS 2017.11.02 13:03:51 LOG7[537]: <- 250-ENHANCEDSTATUSCODES 2017.11.02 13:03:51 LOG7[537]: <- 250-8BITMIME 2017.11.02 13:03:51 LOG7[537]: <- 250 DSN 2017.11.02 13:03:51 LOG7[537]: -> STARTTLS 2017.11.02 13:03:51 LOG7[537]: <- 220 2.0.0 Ready to start TLS 2017.11.02 13:03:51 LOG6[537]: SNI: sending servername: foobar.testserver.com 2017.11.02 13:03:51 LOG6[537]: Peer certificate not required 2017.11.02 13:03:51 LOG7[537]: TLS state (connect): before/connect initialization 2017.11.02 13:03:51 LOG7[537]: TLS state (connect): SSLv3 write client hello A 2017.11.02 13:03:51 LOG7[537]: TLS state (connect): SSLv3 read server hello A 2017.11.02 13:03:51 LOG6[537]: Certificate verification disabled 2017.11.02 13:03:51 LOG6[537]: Certificate verification disabled 2017.11.02 13:03:51 LOG7[537]: TLS state (connect): SSLv3 read server certificate A 2017.11.02 13:03:51 LOG7[537]: TLS state (connect): SSLv3 read server key exchange A 2017.11.02 13:03:51 LOG6[537]: Client certificate not requested 2017.11.02 13:03:51 LOG7[537]: TLS state (connect): SSLv3 read server done A 2017.11.02 13:03:51 LOG7[537]: TLS state (connect): SSLv3 write client key exchange A 2017.11.02 13:03:51 LOG7[537]: TLS state (connect): SSLv3 write change cipher spec A 2017.11.02 13:03:51 LOG7[537]: TLS state (connect): SSLv3 write finished A 2017.11.02 13:03:51 LOG7[537]: TLS state (connect): SSLv3 flush data 2017.11.02 13:03:51 LOG7[537]: TLS state (connect): SSLv3 read server session ticket A 2017.11.02 13:03:51 LOG7[537]: TLS state (connect): SSLv3 read finished A 2017.11.02 13:03:51 LOG7[537]: 2 client connect(s) requested 2017.11.02 13:03:51 LOG7[537]: 2 client connect(s) succeeded 2017.11.02 13:03:51 LOG7[537]: 0 client renegotiation(s) requested 2017.11.02 13:03:51 LOG7[537]: 0 session reuse(s) 2017.11.02 13:03:51 LOG6[537]: TLS connected: new session negotiated 2017.11.02 13:03:51 LOG7[537]: Deallocating application specific data for session connect address 2017.11.02 13:03:51 LOG6[537]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2017.11.02 13:03:51 LOG7[537]: Compression: null, expansion: null 2017.11.02 13:03:52 LOG6[537]: Read socket closed (readsocket) 2017.11.02 13:03:52 LOG7[537]: Sending close_notify alert 2017.11.02 13:03:52 LOG7[537]: TLS alert (write): warning: close notify 2017.11.02 13:03:52 LOG6[537]: SSL_shutdown successfully sent close_notify alert 2017.11.02 13:03:52 LOG7[537]: TLS alert (read): warning: close notify 2017.11.02 13:03:52 LOG6[537]: TLS closed (SSL_read) 2017.11.02 13:03:52 LOG7[537]: Sent socket write shutdown 2017.11.02 13:03:52 LOG5[537]: Connection closed: 2954 byte(s) sent to TLS, 337 byte(s) sent to socket 2017.11.02 13:03:52 LOG7[537]: Remote descriptor (FD=876) closed 2017.11.02 13:03:52 LOG7[537]: Local descriptor (FD=904) closed 2017.11.02 13:03:52 LOG7[537]: Service [mailo-smtp] finished (0 left)

1 0

Re: [stunnel-users] How to distinguish stunnel definition between SMTP through SSL-TLS vs. STARTTLS?
by Harris, Douglas (SSC/SPC) 26 Oct '17

26 Oct '17

> Ok, if I specify > > protocol=smtp > > what does that mean: "Connect through SSL-TLS protocol" or "connect through STARTTLS protocol"? That means connect using STARTTLS. > It seems to me that I ALWAYS have to specify "protocol=smtp" for ALL smtp-server connects. You don't. If you are not using STARTTLS you don't specify "protocol=". > Is this done only by port number 465 vs 587? No. > That would mean there is a hidden configuration by convention! Indeed. That would be bad. > What if the webhoster would set up a special mail server at port 8888? Then you would specify port 8888 in your "connect=" config

1 0

How to distinguish stunnel definition between SMTP through SSL-TLS vs. STARTTLS?
by Ben Stover 26 Oct '17

26 Oct '17

As yyou know there are two types of letting a local email client connect to remote secured SMTP server: 1.) through SSL-TLS and 2.) through STARTTLS How do I distinguish betwen these connection types in the stunnel.conf setup file? In a previous post I was told to look at the "protocol" parameter. Ok, if I specify protocol=smtp what does that mean: "Connect through SSL-TLS protocol" or "connect through STARTTLS protocol"? It seems to me that I ALWAYS have to specify "protocol=smtp" for ALL smtp-server connects. The stunnel documentation does not explain how to setup the *.conf file for each of the variants. Is this done only by port number 465 vs 587? That would mean there is a hidden configuration by convention! What if the webhoster would set up a special mail server at port 8888? Ben

1 0

stunnel and TLS1.2 for IE
by Thomas GMX 20 Oct '17

20 Oct '17

Hello. I have successfully configured my email client (Outlook 2010) to my provider with TLS1.2 via stunnel running as a service. config: debug = 5 engine = capi [freenet-pop3s] client = yes EngineID = capi accept = localhost:2110 connect = mx.freenet.de:995 [freenet-smpts] client = yes EngineID = capi accept = localhost:2025 connect = mx.freenet.de:465 That was no problem. But at this point I am wondering if it is possible and how I can configure stunnel so that "all" https traffic from Internet Explorer is going through stunnel and connect to internet with highest secure level supported. Not only to one specific server (connect = xyz.net) but to all servers given in IE address. By now I guess that I have to set IE so that it uses a https-proxy at "localhost:xxx" with stunnel config "accept = localhost:xxx". But how is stunnel config for "connect x.x.x.x:443" that it connect to the right server in internet I specified in IE address line? Can someone give me a hint? Or impossible? Thanks a lot Thomas

2 1

Connection setup for STARTTLS vs. SSL/TLS for POP3/SMTP mail servers?
by Ben Stover 20 Oct '17

20 Oct '17

In stunnels *.conf file I can specify the mail server name and the port for a connection. How can I tell stunnel to use STARTTLS as connect type? How can I tell stunnel to use SSL/TLS as connect type? Does stunnel support both connect types at all or only one? Is the connect type for SMTP completely determined by port e.g.: STARTTLS over port 587 and SSL/TLS over port 465 or can both connect types use both ports? Assume I do not get the supported connect type information from my webhoster: How can I find it out from my (client) side? What are there error messages? Ben

2 1

Stunnel on Android 7.x not working?
by John Appleseed 14 Oct '17

14 Oct '17

Hello, I have trouble with stunnel on Android 7.x.. I'm trying to connect to OpenVPN server through SSL tunneling with stunnel. On phone I'm using stunnel installed in Termux and OpenVPN. Everything is correctly configured, Im using the same config on other devices in same network and it works perfectly. I tried it with different devices with Android 7.x and it is not working at all :( Immediately after succesful connection I am receiving: TLS fd: Software caused connection abort (103) TLS socket closed (SSL_read) And it is still reconnecting again and again with the same error. I also tried it with stunnel downloaded directly from stunnel.org site.. Anyone with new Android who have working stunnel? Where can be the problem? Example stunnel.conf on Android: socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = debug [openvpn] client = yes accept = 1337 connect = *****.ddns.net:993 cert = /path/to/stunnel.pem and on server: chroot = /var/lib/stunnel4 pid = /stunnel.pid output = /stunnel.log setuid = stunnel4 setgid = stunnel4 socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [openvpn] client = no accept = 993 connect = 127.0.0.1:1194 cert = /etc/stunnel/stunnel.pem Example stunnel.log is in attachment. Thank you very much

1 0

No certificate or private key specified
by Hugo Darley 12 Oct '17

12 Oct '17

Hi, After overcoming some initial more obvious problems I have still been unable to get this client's stunnel configured correctly. "No certificate or private key specified" - is this significant? Stunnel.conf looks like the below: debug = 2 output = stunnel.log CAfile=.\ca-verisign.crt client=yes verify=0 sslVersion = TLSv1.2 options = NO_SSLv2 options = NO_SSLv3 [TRD] accept=16002 connect= our.ip.com:443 [INV] accept=16003 connect= our.ip.com:443 Stunnel output log below 2017.10.12 10:53:22 LOG7[main]: Found 1 ready file descriptor(s) 2017.10.12 10:53:22 LOG7[main]: FD=276 ifds=r-x ofds=--- 2017.10.12 10:53:22 LOG7[main]: FD=284 ifds=r-x ofds=--- 2017.10.12 10:53:22 LOG7[main]: Dispatching signals from the signal pipe 2017.10.12 10:53:22 LOG7[main]: Processing SIGNAL_RELOAD_CONFIG 2017.10.12 10:53:22 LOG7[main]: Running on Windows 6.1 2017.10.12 10:53:22 LOG5[main]: Reading configuration from file stunnel.conf 2017.10.12 10:53:22 LOG5[main]: UTF-8 byte order mark detected 2017.10.12 10:53:22 LOG5[main]: FIPS mode disabled 2017.10.12 10:53:22 LOG7[main]: Compression disabled 2017.10.12 10:53:22 LOG7[main]: Snagged 64 random bytes from C:/.rnd 2017.10.12 10:53:22 LOG7[main]: Wrote 1024 new random bytes to C:/.rnd 2017.10.12 10:53:22 LOG7[main]: PRNG seeded successfully 2017.10.12 10:53:22 LOG6[main]: Initializing service [TRD] 2017.10.12 10:53:22 LOG7[main]: Ciphers: HIGH:!DH:!aNULL:!SSLv2 2017.10.12 10:53:22 LOG7[main]: TLS options: 0x03000004 (+0x03000000, -0x00000000) 2017.10.12 10:53:22 LOG7[main]: No certificate or private key specified 2017.10.12 10:53:22 LOG4[main]: Service [TRD] needs authentication to prevent MITM attacks 2017.10.12 10:53:22 LOG6[main]: Initializing service [INV] 2017.10.12 10:53:22 LOG7[main]: Ciphers: HIGH:!DH:!aNULL:!SSLv2 2017.10.12 10:53:22 LOG7[main]: TLS options: 0x03000004 (+0x03000000, -0x00000000) 2017.10.12 10:53:22 LOG7[main]: No certificate or private key specified 2017.10.12 10:53:22 LOG4[main]: Service [INV] needs authentication to prevent MITM attacks 2017.10.12 10:53:22 LOG5[main]: Configuration successful 2017.10.12 10:53:22 LOG7[main]: Closing service [TRD] 2017.10.12 10:53:22 LOG7[main]: Service [TRD] closed (FD=284) 2017.10.12 10:53:22 LOG7[main]: Service [TRD] closed 2017.10.12 10:53:22 LOG7[main]: Closing service [INV] 2017.10.12 10:53:22 LOG7[main]: Service [INV] closed (FD=276) 2017.10.12 10:53:22 LOG7[main]: Service [INV] closed We tried giving the certification a hard location but still it seems unable to find it. Is there anything in the cfg you can see missing? Bearing in mind this is standard cfg for our clients connecting in. Kind regards, Hugo Darley The information contained in and accompanying this communication is strictly confidential and intended solely for the use of the intended recipient(s). If you have received it by mistake please let us know by reply and then delete it from your system; you should not copy the message or disclose its content to anyone. MarketAxess reserves the right to monitor the content of emails sent to or from its systems. Any comments or statements made are not necessarily those of MarketAxess. For more information, please visit www.marketaxess.com. MarketAxess Europe Limited is authorised and regulated by the UK Financial Conduct Authority, registered in England no. 4017610, registered office at 5 Aldermanbury Square, London EC2V 7HR. Telephone (020) 7709 3100. MarketAxess Corporation is regulated in the USA by the SEC and FINRA, incorporated in Delaware, executive offices at 299 Park Avenue, New York, NY 10171. Telephone (1) 212 813 6000.

1 0

OpenService: Error 1060: The specified service does not exist as an installed service.
by Hugo Darley 09 Oct '17

09 Oct '17

User has recently installed v5.4.2 on a windows machine and gets this error: [cid:[email protected]] Downloaded the .exe file from the website, installed into a D: drive folder (not the C: program files x86 folder), edited the config file to what we have advised countless users in the past and added the verisign crt to the same folder. Has reinstalled a couple of times to no avail. I have searched on the net for help but nothing specific to STunnel. Can anyone advise? Many thanks Hugo The information contained in and accompanying this communication is strictly confidential and intended solely for the use of the intended recipient(s). If you have received it by mistake please let us know by reply and then delete it from your system; you should not copy the message or disclose its content to anyone. MarketAxess reserves the right to monitor the content of emails sent to or from its systems. Any comments or statements made are not necessarily those of MarketAxess. For more information, please visit www.marketaxess.com. MarketAxess Europe Limited is authorised and regulated by the UK Financial Conduct Authority, registered in England no. 4017610, registered office at 5 Aldermanbury Square, London EC2V 7HR. Telephone (020) 7709 3100. MarketAxess Corporation is regulated in the USA by the SEC and FINRA, incorporated in Delaware, executive offices at 299 Park Avenue, New York, NY 10171. Telephone (1) 212 813 6000.

1 1