- stunnel-users - stunnel.org

Maximum number of services
by Malenfant, Andre 04 Sep '09

04 Sep '09

Hi, we have ran into a problem and we have identified that we have reached the limit of 64 services in stunnel. I have seen some info on the net for a possibility or increasing that limit to 256 using the poll() method. There is a patch available for that but for an older version of stunnel. Is there a configuration that I can do to enable that on version 4.20? If not, what are my other options? Set-up a second stunnel? Thanks André

1 0

Re: [stunnel-users] Random Client Ports
by Ludolf Holzheid 02 Sep '09

02 Sep '09

On Wed, 2009-09-02 16:22:35 +0200, Reinier van der Gugten wrote: > I included STunnel in a VB application, and want to start it using the shell command (how else?) > If I start STunnel from the commandline (dos box) it works fine (stunnel\stunnel.exe) > However from within code I get an error: > > Dim MyProcID As Integer = 0 > MyProcID = Shell("Stunnel\STunnel") > stunnel.conf: No such file or directory (2) Reinier, This says, stunnel is found and started by the system, but stunnel does not find stunnel.conf. Maybe it doesn't correctly determine it's own location in relation to the working directory. You might try to specify stunnel.conf on the command line, e.g. MyProcID = Shell("stunnel\stunnel stunnel\stunnel.conf") or MyProcID = Shell("stunnel\stunnel .\stunnel.conf") or something along those lines. Ludolf -- --------------------------------------------------------------- Ludolf Holzheid Tel: +49 621 339960 Bihl+Wiedemann GmbH Fax: +49 621 3392239 Floßwörthstraße 41 e-mail: lholzheid(a)bihl-wiedemann.de D-68199 Mannheim, Germany ---------------------------------------------------------------

1 0

Random Client Ports
by Matt Keoppel 02 Sep '09

02 Sep '09

We are currently trying to add Stunnel to our application. Each time one of our clients try to connect to the server it seems to make its call from a random port. We have set up the server config file to be: [OurApp] accept = 15366 connect = 15365 The config file on our client is set up as: client = yes [OurApp] accept = 1308 connect = [serverIp]:15366 The problem that we are having is that the source port on our client changes every time we try to send data from our client to our server. So one time we send data the port will be 1308 and the next time will be 1309. We also tried to set up multiple configurations that were configure to accept on many ports and all connecting to [serverIP]:15366. Is there any way to get Stunnel working with our dynamic client port? Thanks, MK

4 3

Help compiling - rpath issues
by Jay Martel 18 Aug '09

18 Aug '09

Hello, I am trying to avoid LD_LIBRARY_PATH and thus want to compile in the run time library path. I have tried various options to configure, hacking the LDFLAGS and CC lines in the Makefile, changing libtool varialbes, etc. but my resulting binary never has the library path inside. Things I have tried: LDFLAGS=-R/app/versions/local/3/lib LDFLAGS=-L/app/versions/local/3/lib LDFLAGS=-Wl,--rpath -Wl,/app/versions/local/3/lib libtool variables that seem related but I cannot figure out: hardcode_minus_L=yes hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir" I am using stunnel-4.27 and the configure and libtool it contains. Here is the output of gcc -v: Reading specs from /app/versions/local/3/lib/gcc/i386-pc-solaris2.10/3.4.5/specs Configured with: /opt/autobuild/workdir/gcc-3.4.5/configure --prefix=/app/versions/devtools/3 --with-gnu-ld --with-ld=/app/versions/devtools/3/bin/ld --with-gnu-as --with-as=/app/versions/devtools/3/bin/as --libdir=/app/versions/local/3/lib --with-local-prefix=/app/versions/local/3 --with-gxx-include-dir=/app/versions/local/3/include/c++ --enable-languages=c,c++,objc Thread model: posix gcc version 3.4.5 I am having the same issue with Solaris 10 on i86pc and sparc architectures. Here is the last bit of my make output: /bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/app/versions/local/3/include -o stunnel file.o client.o log.o options.o protocol.o network.o resolver.o ssl.o ctx.o verify.o sthreads.o stunnel.o pty.o libwrap.o -lz -ldl -lsocket -lnsl -lpthread -L/app/versions/local/3/lib -lssl -lcrypto gcc -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/app/versions/local/3/include -o stunnel file.o client.o log.o options.o protocol.o network.o resolver.o ssl.o ctx.o verify.o sthreads.o stunnel.o pty.o libwrap.o -lz -ldl -lsocket -lnsl -lpthread -L/app/versions/local/3/lib -lssl -lcrypto The libtool line should show my rpath setting, I think. How do I get libtool to honor the rpath settings? Should I be asking the libtool maintainers? I check the resulting binary using "strings stunnel | grep app" and my library directory never shows up. Many thanks in advance. -Jay Martel _________________________________________________________________ Windows Live: Make it easier for your friends to see what you’re up to on Facebook. http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:O…

1 0

Re: [stunnel-users] Stunnel configure error
by hdf sdesdh 12 Aug '09

12 Aug '09

Having configured with --enable-static, I thought it would be ok. I tried your suggestion though I got the same error. Here is the complete output. Just a note, I am using the source code tree for TomatoVPN, since it comes with the toolchain to compile everything with. LDFLAGS=-static ./configure2 --host=mipsel-linux --with-ssl=/tmp --enable-static --enable-dh configure2: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. configure2: **************************************** initialization checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for mipsel-linux-strip... mipsel-linux-strip checking build system type... i686-pc-linux-gnu checking host system type... mipsel-unknown-linux-gnu checking for mipsel-linux-gcc... mipsel-linux-gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... yes checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether mipsel-linux-gcc accepts -g... yes checking for mipsel-linux-gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of mipsel-linux-gcc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking whether make sets $(MAKE)... (cached) yes configure2: **************************************** libtool checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by mipsel-linux-gcc... /opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld checking if the linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) is GNU ld... yes checking for /opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld option to reload object files... -r checking for BSD-compatible nm... /opt/brcm/hndtools-mipsel-linux/bin/mipsel-linux-nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... mipsel-linux-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for mipsel-linux-g++... mipsel-linux-g++ checking whether we are using the GNU C++ compiler... yes checking whether mipsel-linux-g++ accepts -g... yes checking dependency style of mipsel-linux-g++... gcc3 checking how to run the C++ preprocessor... mipsel-linux-g++ -E checking for mipsel-linux-g77... no checking for mipsel-linux-xlf... no checking for mipsel-linux-f77... no checking for mipsel-linux-frt... no checking for mipsel-linux-pgf77... no checking for mipsel-linux-cf77... no checking for mipsel-linux-fort77... no checking for mipsel-linux-fl32... no checking for mipsel-linux-af77... no checking for mipsel-linux-xlf90... no checking for mipsel-linux-f90... no checking for mipsel-linux-pgf90... no checking for mipsel-linux-pghpf... no checking for mipsel-linux-epcf90... no checking for mipsel-linux-gfortran... no checking for mipsel-linux-g95... no checking for mipsel-linux-xlf95... no checking for mipsel-linux-f95... no checking for mipsel-linux-fort... no checking for mipsel-linux-ifort... no checking for mipsel-linux-ifc... no checking for mipsel-linux-efc... no checking for mipsel-linux-pgf95... no checking for mipsel-linux-lf95... no checking for mipsel-linux-ftn... no checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 1572864 checking command to parse /opt/brcm/hndtools-mipsel-linux/bin/mipsel-linux-nm -B output from mipsel-linux-gcc object... ok checking for objdir... .libs checking for mipsel-linux-ar... mipsel-linux-ar checking for mipsel-linux-ranlib... mipsel-linux-ranlib checking for mipsel-linux-strip... (cached) mipsel-linux-strip checking if mipsel-linux-gcc supports -fno-rtti -fno-exceptions... yes checking for mipsel-linux-gcc option to produce PIC... -fPIC checking if mipsel-linux-gcc PIC flag -fPIC works... yes checking if mipsel-linux-gcc static flag -static works... yes checking if mipsel-linux-gcc supports -c -o file.o... yes checking whether the mipsel-linux-gcc linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure2: creating libtool appending configuration tag "CXX" to libtool checking for ld used by mipsel-linux-g++... /opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld checking if the linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) is GNU ld... yes checking whether the mipsel-linux-g++ linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) supports shared libraries... yes checking for mipsel-linux-g++ option to produce PIC... -fPIC checking if mipsel-linux-g++ PIC flag -fPIC works... yes checking if mipsel-linux-g++ static flag -static works... yes checking if mipsel-linux-g++ supports -c -o file.o... yes checking whether the mipsel-linux-g++ linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so (cached) (cached) checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool configure2: **************************************** types checking for unsigned char... yes checking size of unsigned char... 1 checking for unsigned short... yes checking size of unsigned short... 2 checking for unsigned int... yes checking size of unsigned int... 4 checking for unsigned long... yes checking size of unsigned long... 4 checking for socklen_t... yes configure2: **************************************** PTY device files checking for "/dev/ptmx"... (cached) yes checking for "/dev/ptc"... no configure2: **************************************** entropy checking for "/dev/urandom"... yes configure2: **************************************** default group checking for default group... nogroup configure2: **************************************** header files checking ucontext.h usability... yes checking ucontext.h presence... yes checking for ucontext.h... yes checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking poll.h usability... yes checking poll.h presence... yes checking for poll.h... yes checking sys/poll.h usability... yes checking sys/poll.h presence... yes checking for sys/poll.h... yes checking tcpd.h usability... no checking tcpd.h presence... no checking for tcpd.h... no checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/filio.h usability... no checking sys/filio.h presence... no checking for sys/filio.h... no checking stropts.h usability... yes checking stropts.h presence... yes checking for stropts.h... yes checking grp.h usability... yes checking grp.h presence... yes checking for grp.h... yes checking for unistd.h... (cached) yes checking util.h usability... no checking util.h presence... no checking for util.h... no checking libutil.h usability... no checking libutil.h presence... no checking for libutil.h... no checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking pty.h usability... yes checking pty.h presence... yes checking for pty.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking for struct msghdr.msg_control... yes configure2: **************************************** libraries checking for library containing gethostbyname... none required checking for library containing yp_get_default_domain... -lnsl checking for socket in -lsocket... no checking for openpty in -lutil... yes checking for dlopen in -ldl... yes checking for shl_load in -ldld... no checking for inflateEnd in -lz... no configure2: **************************************** thread model checking for pthread_create in -lc_r... no checking for pthread_create in -lpthread... yes configure2: PTHREAD thread model detected configure2: **************************************** library functions checking for snprintf... yes checking for vsnprintf... yes checking for openpty... yes checking for _getpty... no checking for daemon... yes checking for waitpid... yes checking for wait4... yes checking for setsid... yes checking for setgroups... yes checking for chroot... yes checking for sysconf... yes checking for getrlimit... yes checking for pthread_sigmask... yes checking for localtime_r... yes checking for getcontext... no checking for __makecontext_v2... no checking for poll... yes checking for endhostent... yes checking for getnameinfo... yes checking for getaddrinfo... yes checking for broken poll() implementation... no configure2: **************************************** SSL checking for SSL directory... /tmp checking for obsolete RSAref library... no checking /tmp/include/openssl/engine.h usability... yes checking /tmp/include/openssl/engine.h presence... no configure2: WARNING: /tmp/include/openssl/engine.h: accepted by the compiler, rejected by the preprocessor! configure2: WARNING: /tmp/include/openssl/engine.h: proceeding with the compiler's result checking for /tmp/include/openssl/engine.h... yes configure2: **************************************** optional features checking whether to disable RSA support... no checking whether to enable DH support... yes checking whether to enable IPv6 support... yes checking whether to disable TCP wrappers library support... autodetecting checking for hosts_access in -lwrap... no checking whether to enable FIPS mode support... autodetecting checking for FIPS_mode_set... no configure2: **************************************** write the results configure2: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating src/stunnel3 config.status: creating doc/Makefile config.status: creating tools/Makefile config.status: creating tools/stunnel.conf-sample config.status: creating tools/stunnel.init config.status: executing depfiles commands configure2: **************************************** success # make Making all in src make[1]: Entering directory `/root/tomato/release/src/router/stunnel/src' if /bin/bash ../libtool --tag=CC --mode=compile mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT env.lo -MD -MP -MF ".deps/env.Tpo" -c -o env.lo env.c; \ then mv -f ".deps/env.Tpo" ".deps/env.Plo"; else rm -f ".deps/env.Tpo"; exit 1; fi mkdir .libs mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" "-DPACKAGE_STRING=\"stunnel 4.27\"" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR=\"/usr/local/lib/stunnel\" -DCONFDIR=\"/usr/local/etc/stunnel\" -DPIDFILE=\"/usr/local/var/run/stunnel/stunnel.pid\" -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT env.lo -MD -MP -MF .deps/env.Tpo -c env.c -fPIC -DPIC -o .libs/env.o mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" "-DPACKAGE_STRING=\"stunnel 4.27\"" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR=\"/usr/local/lib/stunnel\" -DCONFDIR=\"/usr/local/etc/stunnel\" -DPIDFILE=\"/usr/local/var/run/stunnel/stunnel.pid\" -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT env.lo -MD -MP -MF .deps/env.Tpo -c env.c -o env.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=link mipsel-linux-gcc -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -static -o libstunnel.la -rpath /usr/local/lib/stunnel -avoid-version env.lo -ldl -lutil -lnsl -lpthread -L/tmp/lib -lssl -lcrypto mipsel-linux-ar cru .libs/libstunnel.a env.o mipsel-linux-ranlib .libs/libstunnel.a creating libstunnel.la (cd .libs && rm -f libstunnel.la && ln -s ../libstunnel.la libstunnel.la) if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT file.o -MD -MP -MF ".deps/file.Tpo" -c -o file.o file.c; \ then mv -f ".deps/file.Tpo" ".deps/file.Po"; else rm -f ".deps/file.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT client.o -MD -MP -MF ".deps/client.Tpo" -c -o client.o client.c; \ then mv -f ".deps/client.Tpo" ".deps/client.Po"; else rm -f ".deps/client.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT log.o -MD -MP -MF ".deps/log.Tpo" -c -o log.o log.c; \ then mv -f ".deps/log.Tpo" ".deps/log.Po"; else rm -f ".deps/log.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT options.o -MD -MP -MF ".deps/options.Tpo" -c -o options.o options.c; \ then mv -f ".deps/options.Tpo" ".deps/options.Po"; else rm -f ".deps/options.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT protocol.o -MD -MP -MF ".deps/protocol.Tpo" -c -o protocol.o protocol.c; \ then mv -f ".deps/protocol.Tpo" ".deps/protocol.Po"; else rm -f ".deps/protocol.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT network.o -MD -MP -MF ".deps/network.Tpo" -c -o network.o network.c; \ then mv -f ".deps/network.Tpo" ".deps/network.Po"; else rm -f ".deps/network.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT resolver.o -MD -MP -MF ".deps/resolver.Tpo" -c -o resolver.o resolver.c; \ then mv -f ".deps/resolver.Tpo" ".deps/resolver.Po"; else rm -f ".deps/resolver.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT ssl.o -MD -MP -MF ".deps/ssl.Tpo" -c -o ssl.o ssl.c; \ then mv -f ".deps/ssl.Tpo" ".deps/ssl.Po"; else rm -f ".deps/ssl.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT ctx.o -MD -MP -MF ".deps/ctx.Tpo" -c -o ctx.o ctx.c; \ then mv -f ".deps/ctx.Tpo" ".deps/ctx.Po"; else rm -f ".deps/ctx.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT verify.o -MD -MP -MF ".deps/verify.Tpo" -c -o verify.o verify.c; \ then mv -f ".deps/verify.Tpo" ".deps/verify.Po"; else rm -f ".deps/verify.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT sthreads.o -MD -MP -MF ".deps/sthreads.Tpo" -c -o sthreads.o sthreads.c; \ then mv -f ".deps/sthreads.Tpo" ".deps/sthreads.Po"; else rm -f ".deps/sthreads.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT stunnel.o -MD -MP -MF ".deps/stunnel.Tpo" -c -o stunnel.o stunnel.c; \ then mv -f ".deps/stunnel.Tpo" ".deps/stunnel.Po"; else rm -f ".deps/stunnel.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT pty.o -MD -MP -MF ".deps/pty.Tpo" -c -o pty.o pty.c; \ then mv -f ".deps/pty.Tpo" ".deps/pty.Po"; else rm -f ".deps/pty.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT libwrap.o -MD -MP -MF ".deps/libwrap.Tpo" -c -o libwrap.o libwrap.c; \ then mv -f ".deps/libwrap.Tpo" ".deps/libwrap.Po"; else rm -f ".deps/libwrap.Tpo"; exit 1; fi /bin/bash ../libtool --tag=CC --mode=link mipsel-linux-gcc -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -static -o stunnel file.o client.o log.o options.o protocol.o network.o resolver.o ssl.o ctx.o verify.o sthreads.o stunnel.o pty.o libwrap.o -ldl -lutil -lnsl -lpthread -L/tmp/lib -lssl -lcrypto mipsel-linux-gcc -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -o stunnel file.o client.o log.o options.o protocol.o network.o resolver.o ssl.o ctx.o verify.o sthreads.o stunnel.o pty.o libwrap.o -ldl -lutil -lnsl -lpthread -L/tmp/lib -lssl -lcrypto make[1]: Leaving directory `/root/tomato/release/src/router/stunnel/src' Making all in doc make[1]: Entering directory `/root/tomato/release/src/router/stunnel/doc' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/root/tomato/release/src/router/stunnel/doc' Making all in tools make[1]: Entering directory `/root/tomato/release/src/router/stunnel/tools' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/root/tomato/release/src/router/stunnel/tools' make[1]: Entering directory `/root/tomato/release/src/router/stunnel' make[1]: Nothing to be done for `all-am'. make[1]: Leaving directory `/root/tomato/release/src/router/stunnel' # After downloading it, to my router # ./stunnel > -sh: ./stunnel: not found I tried uploading the openssl version I compiled for stunnel (v 1.0.0-stable-SNAP-20090809, which I also compiled for the router, and is functioning mostly) as well, and got the same error. If you have any other suggestions, I'm open to them, otherwise, I think I'm going to have to retire this project for now. Thank you -- Be Yourself @ mail.com! Choose From 200+ Email Addresses Get a Free Account at www.mail.com!

1 0

Re: [stunnel-users] Stunnel configure error
by hdf sdesdh 12 Aug '09

12 Aug '09

Thanks for the suggestion, I was able to make the necessary changes and pass the configure and make process. Unfortunately, after uploading and running the app, the app will not run: # ls -al /tmp -rwxrwxrwx 1 root root 2434012 Aug 12 01:44 stunnel -rw-r--r-- 1 root root 1148 Aug 12 01:37 stunnel.conf -rw-r--r-- 1 root root 1977 Aug 12 01:44 stunnel.pem drwxr-xr-x 1 root root 0 Dec 31 1969 var # cd /tmp # ./stunnel -sh: ./stunnel: not found The file is obviously there, with execute permissions. What is failing?? Thank you > checking for "/dev/ptmx"... configure: error: cannot check for file > existence when cross compiling. > > Give me your suggestions. Check that /dev/ptmx exists on your router; it does on my Buffalo router with Tomato. If it does, then hack the configure script to force the test to return true. A search in the script for ptmx should take you right to the test. Good luck, Andrew. -- Be Yourself @ mail.com! Choose From 200+ Email Addresses Get a Free Account at www.mail.com!

2 1

Stunnel configure error
by hdf sdesdh 12 Aug '09

12 Aug '09

I have been receiving errors when configuring Stunnel, which I intend to cross compile for use with my Linksys WRT54GL router (Tomato firmware). When passing ./configure --host=mipsel-linux --with-ssl=/root/openssl --enable-static --enable-dh --libexecdir=/tmp the configure process stops with an error. Here is the complete output. ./configure --host=mipsel-linux --with-ssl=/root/openssl --enable-static --enable-dh --libexecdir=/tmp configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. configure: **************************************** initialization checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for mipsel-linux-strip... mipsel-linux-strip checking build system type... i686-pc-linux-gnu checking host system type... mipsel-unknown-linux-gnu checking for mipsel-linux-gcc... mipsel-linux-gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... yes checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether mipsel-linux-gcc accepts -g... yes checking for mipsel-linux-gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of mipsel-linux-gcc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking whether make sets $(MAKE)... (cached) yes configure: **************************************** libtool checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by mipsel-linux-gcc... /opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld checking if the linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) is GNU ld... yes checking for /opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld option to reload object files... -r checking for BSD-compatible nm... /opt/brcm/hndtools-mipsel-linux/bin/mipsel-linux-nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... mipsel-linux-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for mipsel-linux-g++... mipsel-linux-g++ checking whether we are using the GNU C++ compiler... yes checking whether mipsel-linux-g++ accepts -g... yes checking dependency style of mipsel-linux-g++... gcc3 checking how to run the C++ preprocessor... mipsel-linux-g++ -E checking for mipsel-linux-g77... no checking for mipsel-linux-xlf... no checking for mipsel-linux-f77... no checking for mipsel-linux-frt... no checking for mipsel-linux-pgf77... no checking for mipsel-linux-cf77... no checking for mipsel-linux-fort77... no checking for mipsel-linux-fl32... no checking for mipsel-linux-af77... no checking for mipsel-linux-xlf90... no checking for mipsel-linux-f90... no checking for mipsel-linux-pgf90... no checking for mipsel-linux-pghpf... no checking for mipsel-linux-epcf90... no checking for mipsel-linux-gfortran... no checking for mipsel-linux-g95... no checking for mipsel-linux-xlf95... no checking for mipsel-linux-f95... no checking for mipsel-linux-fort... no checking for mipsel-linux-ifort... no checking for mipsel-linux-ifc... no checking for mipsel-linux-efc... no checking for mipsel-linux-pgf95... no checking for mipsel-linux-lf95... no checking for mipsel-linux-ftn... no checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 1572864 checking command to parse /opt/brcm/hndtools-mipsel-linux/bin/mipsel-linux-nm -B output from mipsel-linux-gcc object... ok checking for objdir... .libs checking for mipsel-linux-ar... mipsel-linux-ar checking for mipsel-linux-ranlib... mipsel-linux-ranlib checking for mipsel-linux-strip... (cached) mipsel-linux-strip checking if mipsel-linux-gcc supports -fno-rtti -fno-exceptions... yes checking for mipsel-linux-gcc option to produce PIC... -fPIC checking if mipsel-linux-gcc PIC flag -fPIC works... yes checking if mipsel-linux-gcc static flag -static works... yes checking if mipsel-linux-gcc supports -c -o file.o... yes checking whether the mipsel-linux-gcc linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by mipsel-linux-g++... /opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld checking if the linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) is GNU ld... yes checking whether the mipsel-linux-g++ linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) supports shared libraries... yes checking for mipsel-linux-g++ option to produce PIC... -fPIC checking if mipsel-linux-g++ PIC flag -fPIC works... yes checking if mipsel-linux-g++ static flag -static works... yes checking if mipsel-linux-g++ supports -c -o file.o... yes checking whether the mipsel-linux-g++ linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so (cached) (cached) checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool configure: **************************************** types checking for unsigned char... yes checking size of unsigned char... 1 checking for unsigned short... yes checking size of unsigned short... 2 checking for unsigned int... yes checking size of unsigned int... 4 checking for unsigned long... yes checking size of unsigned long... 4 checking for socklen_t... yes configure: **************************************** PTY device files checking for "/dev/ptmx"... configure: error: cannot check for file existence when cross compiling. Give me your suggestions. Thank you -- Be Yourself @ mail.com! Choose From 200+ Email Addresses Get a Free Account at www.mail.com!

2 1

running more than 1 stunnel as windows service
by Franjo Stipanovic 04 Aug '09

04 Aug '09

Hi guys, is there a way to install multiple stunnel instances as windows service? Where could I change service name? I get error: CreateService : the specified service already exists -- best wishes, Franjo Stipanovic

1 1

stunnel, haproxy and ssl cert
by Maxim 04 Aug '09

04 Aug '09

Hello dear community. I faced some troubles for iphone: I moved separate server from hardware to AWS Cloud with SSL certificate from Register.com. It moved well, and phone application continue work with new server without any problems. Then I installed LoadBalancer (HAProxy and Stunnel) for it and moved certificate with key from configs of Apache to config of stunnel. In PC browser it continue works well, and shows me blue field near the URL as trusted. But on iPhone browser it shows just "Untrusted server certificate". Is there any difference for ssl certificate for stunnel and Apache? I understand that there is very specific question, but would you have any ideas about it? *Config of stunnel:* cert = /usr/local/etc/stunnel/stunnel.pem chroot = /usr/local/var/lib/stunnel/ setuid = nobody setgid = nobody pid = /stunnel.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = stunnel.log [https] accept = 443 connect = 80 xforwardedfor=yes TIMEOUTclose = 0 *Patch for stunnel* http://haproxy.1wt.eu/download/patches/stunnel-4.22-xforwarded-for.diff need to make work "xforwardedfor=yes" *# stunnel -version* stunnel 4.22 on i686-pc-linux-gnu with OpenSSL 0.9.8b 04 May 2006 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = /usr/local/etc/stunnel/stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none * # uname -a* Linux domU-12-31-38-00-35-07 2.6.18-xenU-ec2-v1.0 #2 SMP Tue Feb 19 10:51:53 EST 2008 i686 athlon i386 GNU/Linux * # openssl version* OpenSSL 0.9.8b 04 May 2006 *And logs from stunnel when iphone tryed to conenct* 2009.08.04 08:20:16 LOG7[31023:3081598672]: https accepted FD=15 from 24.5.77.143:58019 2009.08.04 08:20:16 LOG7[31023:3081550736]: https started 2009.08.04 08:20:16 LOG7[31023:3081550736]: FD 15 in non-blocking mode 2009.08.04 08:20:16 LOG7[31023:3081550736]: TCP_NODELAY option set on local socket 2009.08.04 08:20:16 LOG7[31023:3081550736]: Waiting for a libwrap process 2009.08.04 08:20:16 LOG7[31023:3081550736]: Acquired libwrap process #0 2009.08.04 08:20:16 LOG7[31023:3081550736]: Releasing libwrap process #0 2009.08.04 08:20:16 LOG7[31023:3081550736]: Released libwrap process #0 2009.08.04 08:20:16 LOG7[31023:3081550736]: https permitted by libwrap from 24.5.77.143:58019 2009.08.04 08:20:16 LOG5[31023:3081550736]: https accepted connection from 24.5.77.143:58019 2009.08.04 08:20:16 LOG7[31023:3081550736]: SSL state (accept): before/accept initialization 2009.08.04 08:20:16 LOG7[31023:3081550736]: SSL state (accept): SSLv3 read client hello A 2009.08.04 08:20:16 LOG7[31023:3081550736]: SSL state (accept): SSLv3 write server hello A 2009.08.04 08:20:16 LOG7[31023:3081550736]: SSL state (accept): SSLv3 write certificate A 2009.08.04 08:20:16 LOG7[31023:3081550736]: SSL state (accept): SSLv3 write server done A 2009.08.04 08:20:16 LOG7[31023:3081550736]: SSL state (accept): SSLv3 flush data 2009.08.04 08:20:16 LOG3[31023:3081550736]: SSL_accept: Peer suddenly disconnected 2009.08.04 08:20:16 LOG5[31023:3081550736]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2009.08.04 08:20:16 LOG7[31023:3081550736]: https finished (0 left) Thank you in advance, Max

1 0

write client hello hang/timeout
by . 01 Aug '09

01 Aug '09

stunnel4 config 2009.08.01 05:09:29 LOG7[4856:0]: Snagged 64 random bytes from /home/c7a71k/.rnd 2009.08.01 05:09:29 LOG7[4856:0]: Wrote 1024 new random bytes to /home/c7a71k/.rnd 2009.08.01 05:09:29 LOG7[4856:0]: RAND_status claims sufficient entropy for the PRNG 2009.08.01 05:09:29 LOG7[4856:0]: PRNG seeded successfully 2009.08.01 05:09:29 LOG7[4856:0]: Certificate: /etc/stunnel/stunnel.pem 2009.08.01 05:09:29 LOG7[4856:0]: Certificate loaded 2009.08.01 05:09:29 LOG7[4856:0]: Key file: /etc/stunnel/stunnel.pem 2009.08.01 05:09:29 LOG7[4856:0]: Private key loaded 2009.08.01 05:09:29 LOG7[4856:0]: SSL context initialized for service stunnel 2009.08.01 05:09:29 LOG5[4856:0]: stunnel 4.22 on i686-pc-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007 2009.08.01 05:09:29 LOG5[4856:0]: Threading:FORK SSL:ENGINE Sockets:POLL,IPv6 2009.08.01 05:09:29 LOG7[4856:0]: stunnel started 2009.08.01 05:09:29 LOG7[4856:0]: FD 0 in non-blocking mode 2009.08.01 05:09:29 LOG7[4856:0]: FD 1 in non-blocking mode 2009.08.01 05:09:29 LOG7[4856:0]: FD 4 in non-blocking mode 2009.08.01 05:09:29 LOG7[4856:0]: stunnel connecting 212.93.193.72:443 2009.08.01 05:09:29 LOG7[4856:0]: connect_wait: waiting 10 seconds 2009.08.01 05:09:29 LOG7[4856:0]: connect_wait: connected 2009.08.01 05:09:29 LOG5[4856:0]: stunnel connected remote server from 192.168.2.100:47406 2009.08.01 05:09:29 LOG7[4856:0]: Remote FD=4 initialized 2009.08.01 05:09:29 LOG7[4856:0]: SSL state (connect): before/connect initialization 2009.08.01 05:09:29 LOG7[4856:0]: SSL state (connect): SSLv2 write client hello A # (hangs indefinitely) #here's the config: client = yes foreground = yes debug = 7 cert = /etc/stunnel/stunnel.pem sslVersion = SSLv2 connect = 212.93.193.72:443 execargs = iceweasel # I think I'm supposed to get a "read server hello A" back?... But I get nothing, and iceweasel is *not* launched. # Anyone know how to overcome this?

1 0