Hi all,
I have inherited an old stunnel installation, configured for mutual
authentication (verify=3) and I'm trying to figure out some of the choices
of the old sysadmin.
One of the client certificates in the CApath directory has its private key
encrypted with a password.
Is the client supposed to provide the password to decrypt the key when it
connects?
Thank you
G
Hi everybody,
i bought an Logitech keyboard with display. I use now stunnel to bring my
email account to my display. Logitech got a applet for this.
Now i can use it but i got a problem with the unread mails. My display shows
me 6 unread messages, but thats all my messages in my in-box and i read it
already.
Is this a problem of stunnel or a problem in the software of the keyboard?
Best Regards
David
Hi All,
I'd like to programmatically install the MS loopback adapter to automate
tunneling of SMB over SSH. All the code which i found on net uses MS devcon
utility.
Please let us know if there is any simple way to automate the installation
of MS loopback adapter. Thank you.
Regards,
Saurabh Beriwal
1. I’m an stunnel newbie.
2. I thought I would give the Mac install script a try: downloaded it to ~/Documents, did the chmod, and ran script; looks like it can’t create/find the config file? Is that something I need to do manually?
WDDMBPW80336XHAGV:Documents williamdockery$ ./stunnel-5.20b8-osx
[ ] Cron started
[ ] Clients allowed=125
[.] stunnel 5.20 on x86_64-apple-darwin14.3.0 platform
[.] Compiled/running with OpenSSL 0.9.8zd 8 Jan 2015
[.] Threading:PTHREAD Sockets:SELECT,IPv6 TLS:ENGINE,OCSP
[ ] errno: (*__error())
[.] Reading configuration from file /etc/stunnel/stunnel.conf
[!] Cannot open configuration file
[.]
[.] Syntax:
[.] stunnel [<filename>] ] -fd <n> | -help | -version | -sockets
[.] <filename> - use specified config file
[.] -fd <n> - read the config file from a file descriptor
[.] -help - get config file help
[.] -version - display version and defaults
[.] -sockets - display default socket options
Thoughts?
Thanks,
William
>
> Message: 1
> Date: Thu, 25 Jun 2015 12:48:02 +0200
> From: Michal Trojnara <Michal.Trojnara(a)mirt.net>
> Cc: stunnel-users(a)stunnel.org
> Subject: Re: [stunnel-users] installing stunnel on Mac Machine
> Message-ID: <558BDC62.9080606(a)mirt.net>
> Content-Type: text/plain; charset=utf-8
>
> Signed PGP part
> On 25.06.2015 08:04, Saurabh Beriwal wrote:
> > Is it possible to automate the installation on Mac machine?
>
> I built an executable for you:
> ftp://ftp.stunnel.org/stunnel/stunnel-5.20b8-osx
> Just copy to a directory, chmod a+x, and run it.
>
> Mike
>
>
Hi All,
I need to install stunnel on Mac machine.
If someone has already done this in past , then please share the
installation steps with me.
Do we need to install anything like loopback adopter in Mac Machine.
Regards,
Saurabh Beriwal
Hi folks,
Can you please tell me the process for swapping out the version of OpenSSL
that comes with Stunnel for a newer version of OpenSSL? Is there a quick
way to do this or does it require recompiling Stunnel?
Thanks.
Paul
Hi,
Is there an MSI installer available for Stunnel version 5.19 ? If so, has anyone tried to call the stunnel MSI installer from an Install shield installer?
Thanks,
DEEPAK SUBBANARASIMHA
Kewill
DDI: +00 (1) 978 482 2625
Email: deepak.subbanarasimha(a)kewill.com<mailto:[email protected]>
www.kewill.com<http://www.kewill.com/>
Tel: +00 (1) 978 482 2500 | Fax: +00 (1) 978 482 2501
1 Executive Drive, Chelmsford, MA 01824, USA
IMPORTANT NOTICE: This email is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure under applicable law. If the reader of this email is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by telephone at (978) 482-2500 and return the original message to us at the listed email address. In accordance with Kewill policy, emails sent and received may be monitored. Kewill accepts no responsibility for any loss or damage should this email contain any virus, or similar destructive or mischievous code. Thank You. Copyright (c) 2013 by Kewill Inc
IMPORTANT NOTICE: This email is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure under applicable law. If the reader of this email is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately return the original message to the sender at the listed email address. In accordance with Kewill policy, emails sent and received may be monitored. Although Kewill takes reasonable precautions to minimize the risk, Kewill accepts no responsibility for any loss or damage should this email contain any virus, or similar destructive or mischievous code.
Hello Michal,
Same problem with 5.19b4 and nothing special in the logs.
Now I know how to reproduce the problem instantly, I just have to put
my computer in StanBy mode and Awake it.
Using Process Explorer from Sysinternals I see that stunnel produce a
permanent "Other I/O" flow when problem appear.
I/O Other : "The rate at which the process is issuing bytes to I/O
operations that do not involve data such as control operations. This
counter counts all I/O activity generated by the process to include
file, network and device I/Os."
OtherI/O is confirmed by Process Monitor that trace no File nor
Registry nor Network activity.
But as stunnel still respond correctly to a Quit menu or any other
menus and SSL requests I assumed that it may be some Thread going
crazy so I compared running thread between normal stunnel behavior
with the 25% CPU behavior and found that in fact there is a thread
that do no terminate correctly.
Here is the Thread's stack :
MSVCR90.dll!_endThread+0x7d
ntoskrnl.exe!memset+0x61a
ntoskrnl.exe!KeWaitForMultipleObjects+0xd52
ntoskrnl.exe!KeWaitForSingleObject+0x19f
ntoskrnl.exe!PoStartNextPowerIrp+0xba4
ntoskrnl.exe!PoStartNextPowerIrp+0x1821
ntoskrnl.exe!PoStartNextPowerIrp+0x1a97
ntoskrnl.exe!KeReleaseInStackQueuedSpinLock+0x5a
afd.sys+0x61c1c
afd.sys+0x51d3b
ntoskrnl.exe!NtMapViewOfSection+0x15b7
ntoskrnl.exe!NtDeviceIoControlFile+0x56
ntoskrnl.exe!KeSynchronizeExecution+0x3a23
wow64cpu.dll!TurboDispatchJumpAddressEnd+0x6c0
wow64cpu.dll!TurboDispatchJumpAddressEnd+0x1fb
wow64.dll!Wow64SystemServiceEx+0x1ce
wow64.dll!Wow64LdrpInitialize+0x42a
ntdll.dll!RtlIsDosDeviceName_U+0x1f5c4
ntdll.dll!LdrInitializeThunk+0xe
ntdll.dll!NtDeviceIoControlFile+0x15
WS2_32.dll!select+0x9f
stunnel.exe!OPENSSL_Applink+0xd3ec
stunnel.exe!OPENSSL_Applink+0x961
Hope it help...
regards.
MT> Please try stunnel 5.19b4:
MT> https://www.stunnel.org/downloads.html
Hi All,
I am using stunnel to connect with SAMBA server and getting error in
binding with server.
Please let me know if it is mandatory to disable window server service for
using stunnel.
Also i would appreciate if some one can share knowledge\articles on window
to SAMBA server connectivity through stunnel.
Thank you.
Regards,
Saurabh Beriwal
