Alaric:
This is strange. When I go to the Security Center, it says the McAfee Personal Firewall is on, but I can't find it in the Start menu, Services, or anywhere else.
Any ideas?
Thanks, Neil
-- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com FREE! Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com for details.
-----Original Message----- From: Alaric Dailey [mailto:[email protected]] Sent: Thursday, April 26, 2007 3:48 PM To: 'Neil Aggarwal' Subject: RE: [stunnel-users] Vista not connecting to port 139
I would check the windows firewall, or any other security suite you may have.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Neil Aggarwal Sent: Thursday, April 26, 2007 15:30 To: [email protected] Subject: [stunnel-users] Vista not connecting to port 139
Hello:
I am trying to map a network drive over an stunnel connection. The server is Linux and the client machine is Windows Vista (Ugh!).
I have stunnel installed and working. I have the following in my stunnel.conf:
client = yes delay = yes
[netDrives] accept = 222.222.222.222:139 connect = www.jammconsulting.com:2139
When I go to map the network drive on vista, I use this command: net use x: \222.222.222.222\MyShare mypass /user:myuser
It eventually gives me an error message about network path not found.
Looking at the stunnel window, there are no messages about any connections to the stunnel.
If I do: telnet 222.222.222.222 139 the telnet session connects and I see messages about a connection in the stunnel window.
Any ideas why Vista is not using port 139?
Thanks, Neil
-- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com FREE! Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com for details.
_______________________________________________ stunnel-users mailing list [email protected] http://stunnel.mirt.net/mailman/listinfo/stunnel-users
Hi Neil,
I don't know about Vista ... But in older versions of MS Windows it's not possible to map any services to port 139. The way around it is to create additional loopback devices and then reach the share on those.
I have attached a little doc I threw together way back when we were looking into using Stunnel to encrypt SMB traffic.
-Claus ____________________________________________ Claus Lund Systems Developer
Vermont Department of Taxes Information Systems 133 State Street Montpelier, Vermont 05633-1401 (802) 828-3735
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Neil Aggarwal Sent: Thursday, April 26, 2007 5:13 PM To: [email protected] Subject: RE: [stunnel-users] Vista not connecting to port 139
Alaric:
This is strange. When I go to the Security Center, it says the McAfee Personal Firewall is on, but I can't find it in the Start menu, Services, or anywhere else.
Any ideas?
Thanks, Neil
-- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com FREE! Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com for details.
-----Original Message----- From: Alaric Dailey [mailto:[email protected]] Sent: Thursday, April 26, 2007 3:48 PM To: 'Neil Aggarwal' Subject: RE: [stunnel-users] Vista not connecting to port 139
I would check the windows firewall, or any other security suite you may have.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Neil Aggarwal Sent: Thursday, April 26, 2007 15:30 To: [email protected] Subject: [stunnel-users] Vista not connecting to port 139
Hello:
I am trying to map a network drive over an stunnel connection. The server is Linux and the client machine is Windows Vista (Ugh!).
I have stunnel installed and working. I have the following in my stunnel.conf:
client = yes delay = yes
[netDrives] accept = 222.222.222.222:139 connect = www.jammconsulting.com:2139
When I go to map the network drive on vista, I use this command: net use x: \222.222.222.222\MyShare mypass /user:myuser
It eventually gives me an error message about network path not found.
Looking at the stunnel window, there are no messages about any connections to the stunnel.
If I do: telnet 222.222.222.222 139 the telnet session connects and I see messages about a connection in the stunnel window.
Any ideas why Vista is not using port 139?
Thanks, Neil
-- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com FREE! Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com for details.
_______________________________________________ stunnel-users mailing list [email protected] http://stunnel.mirt.net/mailman/listinfo/stunnel-users
_______________________________________________ stunnel-users mailing list [email protected] http://stunnel.mirt.net/mailman/listinfo/stunnel-users
-
Lund, Claus -
Neil Aggarwal