I am faling to connect to gmail. Not sure what that bind error means.
iqbala@ghar:~$ sudo stunnel4
2008.12.15 13:53:17 LOG7[3839:3083650736]: Snagged 64 random bytes
from /home/iqbala/.rnd
2008.12.15 13:53:17 LOG7[3839:3083650736]: Wrote 1024 new random bytes
to /home/iqbala/.rnd
2008.12.15 13:53:17 LOG7[3839:3083650736]: RAND_status claims
sufficient entropy for the PRNG
2008.12.15 13:53:17 LOG7[3839:3083650736]: PRNG seeded successfully
2008.12.15 13:53:17 LOG7[3839:3083650736]: Certificate: /etc/stunnel/stunnel.pem
2008.12.15 13:53:17 LOG7[3839:3083650736]: Certificate loaded
2008.12.15 13:53:17 LOG7[3839:3083650736]: Key file: /etc/stunnel/stunnel.pem
2008.12.15 13:53:17 LOG7[3839:3083650736]: Private key loaded
2008.12.15 13:53:17 LOG7[3839:3083650736]: SSL context initialized for
service ssmtp
2008.12.15 13:53:17 LOG5[3839:3083650736]: stunnel 4.22 on
i486-pc-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007
2008.12.15 13:53:17 LOG5[3839:3083650736]: Threading:PTHREAD
SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP
2008.12.15 13:53:17 LOG6[3839:3083650736]: file ulimit = 1024 (can be
changed with 'ulimit -n')
2008.12.15 13:53:17 LOG6[3839:3083650736]: poll() used - no FD_SETSIZE
limit for file descriptors
2008.12.15 13:53:17 LOG5[3839:3083650736]: 500 clients allowed
2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 10 in non-blocking mode
2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 11 in non-blocking mode
2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 12 in non-blocking mode
2008.12.15 13:53:17 LOG7[3839:3083650736]: SO_REUSEADDR option set on
accept socket
2008.12.15 13:53:17 LOG3[3839:3083650736]: Error binding ssmtp to
74.125.93.111:587
2008.12.15 13:53:17 LOG3[3839:3083650736]: bind: Cannot assign
requested address (99)
Here is how my conf file looks like
iqbala@ghar:~$ cat /etc/stunnel/stunnel.conf | egrep -v "^;|^$"
cert = /etc/stunnel/stunnel.pem
foreground = yes
sslVersion = SSLv3
chroot = /var/lib/stunnel4/
setuid = stunnel4
setgid = stunnel4
pid = /stunnel4.pid
socket = l:TCP_NODELAY=1
socket = r:TCP_NODELAY=1
debug = 7
output = /var/log/stunnel4/stunnel.log
client = yes
[ssmtp]
accept = smtp.gmail.com:587
connect = 25
Asif Iqbal
PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu
5
9
Hi,
This may be a little bit off-topic, but does anyone here use stunnel with
pan? My connections to stunnel (in pan) are always refused by libwrap. I was
looking for the right rule to add to /etc/hosts.allow but nothing seems to
work aside from "ALL : ALL" (which is obviously not good) and "nntps:
KNOWN". Is the latter reasonable? The hosts_access(5) manpage is confusing
to say the least. It mentions that daemon (the first token on any line) is
the name of the daemon running the process, which would be "stunnel" in my
case, but using "stunnel : LOCAL" or even "stunnel : ALL" doesn't work. The
rule that seems to work, as mentioned, is "nntps : KNOWN" ("nntps" being the
group name in stunnel.conf).
What's even more confusing to me is that "nntps : LOCAL" does not work
either. Nor does "nntps : localhost 127.0.0.1", "nntps : localhost", "nntps
: 127.0.0.1", or "nntps : 192.168.1.". Pan is running on the same machine as
stunnel so all connections must be coming from localhost. Why do these rules
not trigger?
Either way, I'd like to know the "least permissive" hosts.allow rule that
would allow me to connect to my news provider from pan, and/or whether
"nntps : KNOWN" is a safe option.
Thanks,
Yousef
3
6
Dear Users,
I have released version 4.53 of stunnel. This is major a bugfix
release. Upgrade is highly recommended.
The ChangeLog entry:
Version 4.53, 2012.03.19, urgency: MEDIUM:
* New features
- Added client-mode "sni" option to directly control the value of
TLS Server Name Indication (RFC 3546) extension.
- Added support for IP_FREEBIND socket option with a pached Linux
kernel.
- Glibc-specific dynamic allocation tuning was applied to help
unused memory
deallocation.
- Non-blocking OCSP implementation.
* Bugfixes
- Compilation fixes for old versions of OpenSSL (tested against
0.9.6).
- Usage of uninitialized variables fixed in exec+connect services.
- Occasional logging subsystem crash with exec+connect services.
- OpenBSD compilation fix (thx to Michele Orru').
- Session id context initialized with session name rather than a
constant.
- Fixed handling of a rare inetd mode use case, where either stdin
or stdout
is a socket, but not both of them at the same time.
- Fixed missing OPENSSL_Applink http://www.openssl.org/support/faq.html#PROG2
- Fixed crash on termination with FORK threading model.
- Fixed dead canary after configuration reload with open connections.
- Fixed missing file descriptors passed to local mode processes.
- Fixed required jmp_buf alignment on Itanium platform.
- Removed creating /dev/zero in the chroot jail on Solaris platform.
- Fixed detection of WSAECONNREFUSED Winsock error.
- Missing Microsoft.VC90.CRT.manifest added to Windows installer.
Home page: http://www.stunnel.org/
Download: ftp://ftp.stunnel.org/stunnel/
SHA-256 hash for stunnel-4.53.tar.gz:
3e640aa4c96861d10addba758b66e99e7c5aec8697764f2a59ca2268901b8e57
Best regards,
Mike
3
2
Stunnel running for a few minutes and then stop and can't handle multiple domains
by Thomas Manson 01 Apr '12
by Thomas Manson 01 Apr '12
01 Apr '12
Hi,
I've setup a stunnel install to handle several website SSL part of the
HTTP (then redirected to HAProxy LoadBalancer).
I can successfully start one site, but if I add another website (so
another stunnel conf file in /etc/stunnel) then the first is said to be
already running while it's not and the second starts for real.
thomas@ns0:/var/log/stunnel4$ sudo service stunnel4 start
Starting SSL tunnels: [Started: /etc/stunnel/base.conf] [Started:
/etc/stunnel/extranet.onesite.com.conf] *[Already running:
/etc/stunnel/mansonthomas.com.conf] stunnel.*
(mansonthomas.com was my first try before implementing a client website)
Also, in /var/log/stunnel.log I've only the logs for base.conf, not for the
two other one. What should I do to have the logs? I've tryed to add debug=7
at the beginning of the two conf file, but nothing.
After some times, the extranet site https stops working...
I was off in holidays for the last two weeks, so I didn't have the time
to really dig into this...
what would be the first steps to debug this issues ?
Regards,
Thomas.
2012.03.29 15:31:41 LOG5[8181:140471188047648]: Reading configuration from
file /etc/stunnel/base.conf
2012.03.29 15:31:41 LOG7[8181:140471188047648]: Snagged 64 random bytes
from /dev/urandom
2012.03.29 15:31:41 LOG7[8181:140471188047648]: PRNG seeded successfully
2012.03.29 15:31:41 LOG7[8181:140471188047648]: Using DH parameters from
/etc/stunnel/sites/mainsite.com/mainsite.com.crt
2012.03.29 15:31:41 LOG6[8181:140471188047648]: DH initialized with 2048
bit key
2012.03.29 15:31:41 LOG7[8181:140471188047648]: ECDH initialized
2012.03.29 15:31:41 LOG7[8181:140471188047648]: Certificate:
/etc/stunnel/sites/mainsite.com/mainsite.com.crt
2012.03.29 15:31:41 LOG7[8181:140471188047648]: Certificate loaded
2012.03.29 15:31:41 LOG7[8181:140471188047648]: Key file:
/etc/stunnel/sites/mainsite.com/mainsite.com.key
2012.03.29 15:31:41 LOG7[8181:140471188047648]: Private key loaded
2012.03.29 15:31:41 LOG7[8181:140471188047648]: SSL context initialized for
service https-mainsite.com
2012.03.29 15:31:41 LOG5[8181:140471188047648]: Configuration successful
2012.03.29 15:31:41 LOG5[8181:140471188047648]: No limit detected for the
number of clients
2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=3
allocated (blocking mode)
2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=4
allocated (blocking mode)
2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=4
allocated (blocking mode)
2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=5
allocated (blocking mode)
2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=5
allocated (blocking mode)
2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=6
allocated (blocking mode)
2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=6
allocated (blocking mode)
2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=7
allocated (blocking mode)
2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=7
allocated (blocking mode)
2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=8
allocated (blocking mode)
2012.03.29 15:31:41 LOG7[8181:140471188047648]: signal_pipe: FD=9 allocated
(blocking mode)
2012.03.29 15:31:41 LOG7[8181:140471188047648]: signal_pipe: FD=10
allocated (blocking mode)
2012.03.29 15:31:41 LOG7[8181:140471188047648]: accept socket: FD=11
allocated (non-blocking mode)
2012.03.29 15:31:41 LOG7[8181:140471188047648]: Option SO_REUSEADDR set on
accept socket
2012.03.29 15:31:41 LOG7[8181:140471188047648]: Service
https-mainsite.combound to
8.19.1.2:443
2012.03.29 15:31:41 LOG7[8181:140471188047648]: Service
https-mainsite.comopened FD=11
2012.03.29 15:31:41 LOG7[8187:140471188047648]: Created pid file
/var/run/stunnel4/stunnel4.pid
2012.03.29 15:31:41 LOG5[8187:140471188047648]: stunnel 4.35 on
x86_64-pc-linux-gnu with OpenSSL 1.0.0e 6 Sep 2011
2012.03.29 15:31:41 LOG5[8187:140471188047648]: Threading:PTHREAD
SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP
2012.03.29 15:31:49 LOG7[8187:140471188047648]: Dispatching signals from
the signal pipe
2012.03.29 15:31:49 LOG5[8187:140471188047648]: Received signal 15;
terminating
2012.03.29 15:31:49 LOG7[8187:140471188047648]: removing pid file
/var/run/stunnel4/stunnel4.pid
2012.03.29 15:32:38 LOG5[8280:140481745549088]: Reading configuration from
file /etc/stunnel/base.conf
2012.03.29 15:32:38 LOG7[8280:140481745549088]: Snagged 64 random bytes
from /dev/urandom
2012.03.29 15:32:38 LOG7[8280:140481745549088]: PRNG seeded successfully
2012.03.29 15:32:38 LOG7[8280:140481745549088]: Using DH parameters from
/etc/stunnel/sites/mainsite.com/mainsite.com.crt
2012.03.29 15:32:38 LOG6[8280:140481745549088]: DH initialized with 2048
bit key
2012.03.29 15:32:38 LOG7[8280:140481745549088]: ECDH initialized
2012.03.29 15:32:38 LOG7[8280:140481745549088]: Certificate:
/etc/stunnel/sites/mainsite.com/mainsite.com.crt
2012.03.29 15:32:38 LOG7[8280:140481745549088]: Certificate loaded
2012.03.29 15:32:38 LOG7[8280:140481745549088]: Key file:
/etc/stunnel/sites/mainsite.com/mainsite.com.key
2012.03.29 15:32:38 LOG7[8280:140481745549088]: Private key loaded
2012.03.29 15:32:38 LOG7[8280:140481745549088]: SSL context initialized for
service https-mainsite.com
2012.03.29 15:32:38 LOG5[8280:140481745549088]: Configuration successful
2012.03.29 15:32:38 LOG5[8280:140481745549088]: No limit detected for the
number of clients
2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=3
allocated (blocking mode)
2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=4
allocated (blocking mode)
2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=4
allocated (blocking mode)
2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=5
allocated (blocking mode)
2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=5
allocated (blocking mode)
2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=6
allocated (blocking mode)
2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=6
allocated (blocking mode)
2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=7
allocated (blocking mode)
2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=7
allocated (blocking mode)
2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=8
allocated (blocking mode)
2012.03.29 15:32:38 LOG7[8280:140481745549088]: signal_pipe: FD=9 allocated
(blocking mode)
2012.03.29 15:32:38 LOG7[8280:140481745549088]: signal_pipe: FD=10
allocated (blocking mode)
2012.03.29 15:32:38 LOG7[8280:140481745549088]: accept socket: FD=11
allocated (non-blocking mode)
2012.03.29 15:32:38 LOG7[8280:140481745549088]: Option SO_REUSEADDR set on
accept socket
2012.03.29 15:32:38 LOG7[8280:140481745549088]: Service
https-mainsite.combound to
8.19.1.2:443
2012.03.29 15:32:38 LOG7[8280:140481745549088]: Service
https-mainsite.comopened FD=11
2012.03.29 15:32:38 LOG7[8286:140481745549088]: Created pid file
/var/run/stunnel4/stunnel4.pid
2012.03.29 15:32:38 LOG5[8286:140481745549088]: stunnel 4.35 on
x86_64-pc-linux-gnu with OpenSSL 1.0.0e 6 Sep 2011
2012.03.29 15:32:38 LOG5[8286:140481745549088]: Threading:PTHREAD
SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP
1
2
31 Mar '12
Hello,
I have successfully used stunnel with blat to send e-mails from my gmail
accounts. Getting this to work with my new internet provider "Ziggo" in
The Netherlands seems impossible, despite days spent on the internet
searching for help and trying numerous configurations. Whatever I do,
there is always this message:
SSL_connect: 1408F10B: error:1408F10B:SSL
routines:SSL3_GET_RECORD:wrong version number
Any help would be highly appreciated.
Pieter Verberne
PC: i7
OS: Windows 7 - 64bits
Stunnel version: 4.53
When sending an e-mail from my PC with Thunderbird 2.0 I can
successfully use TLS but not SSL.
My provider says about secure smtp connections on their website:
Outgoing mail server
smtp.ziggo.nl (port number 587)
Use of SSL (Secure Socket Layer) / TLS yes
For this server is verification required / identity check yes
User name
your e-mail address
Password
your e-mail password
Stunnel.conf:
# GLOBAL OPTIONS
debug = 7
output = D:\Pieter\Temp\stunnel-log.txt
fips = no
cert = stunnel.pem
# SERVICE-LEVEL OPTIONS
[SMTP Ziggo]
client = yes
options = NO_SSLv2
options = NO_SSLv3
sslVersion = TLSv1
accept = 587
connect = smtp.ziggo.nl:587
stunnel-log.txt:
2012.03.31 12:04:33 LOG7[2460:2516]: No limit detected for the
number of clients
2012.03.31 12:04:33 LOG5[2460:2516]: stunnel 4.53 on
x86-pc-mingw32-gnu platform
2012.03.31 12:04:33 LOG5[2460:2516]: Compiled/running with OpenSSL
0.9.8s-fips 4 Jan 2012
2012.03.31 12:04:33 LOG5[2460:2516]: Threading:WIN32
SSL:+ENGINE+OCSP+FIPS Auth:none Sockets:SELECT+IPv6
2012.03.31 12:04:33 LOG5[2460:2516]: Reading configuration from file
stunnel.conf
2012.03.31 12:04:33 LOG5[2460:2516]: FIPS mode is disabled
2012.03.31 12:04:33 LOG7[2460:2516]: Compression not enabled
2012.03.31 12:04:34 LOG7[2460:2516]: Snagged 64 random bytes from
C:/.rnd
2012.03.31 12:04:34 LOG7[2460:2516]: Wrote 1024 new random bytes to
C:/.rnd
2012.03.31 12:04:34 LOG7[2460:2516]: PRNG seeded successfully
2012.03.31 12:04:34 LOG6[2460:2516]: Initializing service section
[SMTP Ziggo]
2012.03.31 12:04:34 LOG7[2460:2516]: Certificate: stunnel.pem
2012.03.31 12:04:34 LOG7[2460:2516]: Certificate loaded
2012.03.31 12:04:34 LOG7[2460:2516]: Key file: stunnel.pem
2012.03.31 12:04:34 LOG7[2460:2516]: Private key loaded
2012.03.31 12:04:34 LOG7[2460:2516]: SSL options set: 0x03000004
2012.03.31 12:04:34 LOG5[2460:2516]: Configuration successful
2012.03.31 12:04:34 LOG7[2460:2516]: Service [SMTP Ziggo] (FD=308)
bound to 0.0.0.0:587
2012.03.31 12:06:01 LOG7[2460:2516]: Service [SMTP Ziggo] accepted
(FD=436) from 192.168.3.11:49195
2012.03.31 12:06:01 LOG7[2460:2516]: Creating a new thread
2012.03.31 12:06:01 LOG7[2460:2516]: New thread created
2012.03.31 12:06:01 LOG7[2460:3652]: Service [SMTP Ziggo] started
2012.03.31 12:06:01 LOG5[2460:3652]: Service [SMTP Ziggo] accepted
connection from 192.168.3.11:49195
2012.03.31 12:06:01 LOG6[2460:3652]: connect_blocking: connecting
212.xx.xx.x:587
2012.03.31 12:06:01 LOG7[2460:3652]: connect_blocking: s_poll_wait
212.xx.xx.x:587: waiting 10 seconds
2012.03.31 12:06:01 LOG5[2460:3652]: connect_blocking: connected
212.xx.xx.x:587
2012.03.31 12:06:01 LOG5[2460:3652]: Service [SMTP Ziggo] connected
remote server from 192.168.3.11:49196
2012.03.31 12:06:01 LOG7[2460:3652]: Remote socket (FD=460) initialized
2012.03.31 12:06:01 LOG3[2460:3652]: *SSL_connect: 1408F10B:
error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number*
2012.03.31 12:06:01 LOG5[2460:3652]: Connection reset: 0 byte(s)
sent to SSL, 0 byte(s) sent to socket
2012.03.31 12:06:01 LOG7[2460:3652]: Remote socket (FD=460) closed
2012.03.31 12:06:01 LOG7[2460:3652]: Local socket (FD=436) closed
2012.03.31 12:06:01 LOG7[2460:3652]: Service [SMTP Ziggo] finished
(0 left)
2012.03.31 12:18:01 LOG7[2460:2516]: Dispatching signals from the
signal pipe
2012.03.31 12:18:04 LOG7[2460:2516]: Processing SIGNAL_TERMINATE
1
0
Hi Jose,
That did it, thanks.
Stupid thing is I check that I had OpenSSL but not the devel package.
Mark one up for my stupidity (again).
~Yours,
Scott
On 30 March 2012 16:11, <josealf(a)rocketmail.com> wrote:
> Scott,
>
> Most likely you don't have openssl-devel package installed.
>
> Regards
> Jose
>
> -----Original Message-----
> From: Scott McKeown <scott(a)loadbalancer.org>
> Sender: stunnel-users-bounces(a)stunnel.org
> Date: Fri, 30 Mar 2012 16:00:45
> To: <stunnel-users(a)stunnel.org>
> Subject: [stunnel-users] stunnel 4.53 make error
>
> _______________________________________________
> stunnel-users mailing list
> stunnel-users(a)stunnel.org
> http://stunnel.mirt.net/mailman/listinfo/stunnel-users
>
>
>
>
1
0
Hi Guys,
Just tried to install stunnel-4.53 onto a virgin Cento6.2 x64 system with
HAProxy (box is fully patched too), However, every time I runt the 'make'
command I get the following output. I've had a bit of a hunt around but
this is a little outside of both my comfort zone and my knowledge levels so
any help would be great.
[root@localhost ~]# cd /root/stunnel-4.53
[root@localhost stunnel-4.53]# make
Making all in src
make[1]: Entering directory `/root/stunnel-4.53/src'
make all-am
make[2]: Entering directory `/root/stunnel-4.53/src'
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -g -O2 -Wall -Wextra -Wno-long-long -pedantic -MT
stunnel-str.o -MD -MP -MF .deps/stunnel-str.Tpo -c -o stunnel-str.o `test
-f 'str.c' || echo './'`str.c
In file included from str.c:38:
common.h:392:33: error: openssl/opensslconf.h: No such file or directory
common.h:405:27: error: openssl/lhash.h: No such file or directory
common.h:406:25: error: openssl/ssl.h: No such file or directory
common.h:407:25: error: openssl/err.h: No such file or directory
common.h:408:66: error: openssl/crypto.h: No such file or directory
common.h:409:26: error: openssl/rand.h: No such file or directory
common.h:411:25: error: openssl/md4.h: No such file or directory
common.h:413:25: error: openssl/des.h: No such file or directory
In file included from str.c:38:
common.h:449: warning: return type defaults to ‘int’
common.h: In function ‘STACK_OF’:
common.h:449: error: expected declaration specifiers before ‘*’ token
In file included from str.c:39:
prototypes.h:50: error: storage class specified for parameter ‘LOG_MODE’
prototypes.h:61: error: storage class specified for parameter
‘SOCKADDR_UNION’
prototypes.h:64: error: expected specifier-qualifier-list before
‘SOCKADDR_UNION’
prototypes.h:67: warning: struct has no members
prototypes.h:67: error: storage class specified for parameter
‘SOCKADDR_LIST’
prototypes.h:72: error: storage class specified for parameter ‘COMP_TYPE’
prototypes.h:78: error: expected specifier-qualifier-list before ‘COMP_TYPE’
prototypes.h:114: warning: struct has no members
prototypes.h:114: error: storage class specified for parameter
‘GLOBAL_OPTIONS’
prototypes.h:116: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’
before ‘global_options’
prototypes.h:124: error: expected specifier-qualifier-list before ‘SSL_CTX’
prototypes.h:222: error: storage class specified for parameter
‘SERVICE_OPTIONS’
prototypes.h:224: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’
before ‘service_options’
prototypes.h:236: error: storage class specified for parameter ‘VAL_TYPE’
prototypes.h:244: error: storage class specified for parameter ‘OPT_UNION’
prototypes.h:250: error: expected specifier-qualifier-list before ‘VAL_TYPE’
prototypes.h:252: error: storage class specified for parameter ‘SOCK_OPT’
prototypes.h:256: error: storage class specified for parameter ‘CONF_TYPE’
prototypes.h:269: error: storage class specified for parameter ‘s_poll_set’
prototypes.h:278: error: storage class specified for parameter ‘DISK_FILE’
prototypes.h:285: error: storage class specified for parameter ‘FD’
prototypes.h:290: error: storage class specified for parameter ‘max_clients’
prototypes.h:291: error: storage class specified for parameter ‘num_clients’
prototypes.h:327: warning: parameter names (without types) in function
declaration
prototypes.h:347: error: storage class specified for parameter ‘cli_index’
prototypes.h:347: error: storage class specified for parameter ‘opt_index’
prototypes.h:350: error: expected ‘)’ before ‘*’ token
prototypes.h:355: error: expected declaration specifiers or ‘...’ before
‘CONF_TYPE’
prototypes.h:361: error: expected specifier-qualifier-list before
‘SERVICE_OPTIONS’
prototypes.h:363: warning: struct has no members
prototypes.h:363: error: storage class specified for parameter ‘UI_DATA’
prototypes.h:365: error: expected ‘)’ before ‘*’ token
prototypes.h:370: error: expected ‘)’ before ‘*’ token
prototypes.h:374: error: expected declaration specifiers before ‘s_poll_set’
prototypes.h:375: error: expected ‘)’ before ‘*’ token
prototypes.h:376: error: expected ‘)’ before ‘*’ token
prototypes.h:377: error: expected ‘)’ before ‘*’ token
prototypes.h:378: error: expected ‘)’ before ‘*’ token
prototypes.h:379: error: expected ‘)’ before ‘*’ token
prototypes.h:380: error: expected ‘)’ before ‘*’ token
prototypes.h:381: error: expected ‘)’ before ‘*’ token
prototypes.h:401: error: expected specifier-qualifier-list before ‘SSL’
prototypes.h:422: error: storage class specified for parameter ‘CLI’
prototypes.h:424: error: expected declaration specifiers before ‘CLI’
prototypes.h:426: error: expected ‘)’ before ‘*’ token
prototypes.h:430: error: expected ‘)’ before ‘*’ token
prototypes.h:431: error: expected ‘)’ before ‘*’ token
prototypes.h:432: error: expected ‘)’ before ‘*’ token
prototypes.h:433: error: expected ‘)’ before ‘*’ token
prototypes.h:434: error: expected ‘)’ before ‘*’ token
prototypes.h:436: error: expected ‘)’ before ‘*’ token
prototypes.h:450: error: storage class specified for parameter
‘PROTOCOL_TYPE’
prototypes.h:453: error: expected ‘)’ before ‘*’ token
prototypes.h:457: error: expected ‘)’ before ‘*’ token
prototypes.h:458: error: expected ‘)’ before ‘*’ token
prototypes.h:459: error: expected ‘)’ before ‘*’ token
prototypes.h:460: error: expected ‘)’ before ‘*’ token
prototypes.h:461: error: expected ‘)’ before ‘*’ token
prototypes.h:462: warning: type defaults to ‘int’ in declaration of
‘SOCKADDR_UNION’
prototypes.h:462: error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token
prototypes.h:493: error: storage class specified for parameter
‘SECTION_CODE’
prototypes.h:495: warning: parameter names (without types) in function
declaration
prototypes.h:496: warning: parameter names (without types) in function
declaration
prototypes.h:500: error: expected declaration specifiers or ‘...’ before
‘CLI’
prototypes.h:548: error: expected declaration specifiers before ‘DISK_FILE’
prototypes.h:550: error: expected declaration specifiers before ‘DISK_FILE’
prototypes.h:551: error: expected ‘)’ before ‘*’ token
prototypes.h:552: error: expected ‘)’ before ‘*’ token
prototypes.h:553: error: expected ‘)’ before ‘*’ token
prototypes.h:563: error: expected ‘)’ before ‘*’ token
str.c:49: error: storage class specified for parameter ‘canary’
str.c:50: error: storage class specified for parameter ‘canary_initialized’
str.c:50: error: parameter ‘canary_initialized’ is initialized
str.c:52: error: storage class specified for parameter ‘ALLOC_LIST’
str.c:55: error: expected specifier-qualifier-list before ‘ALLOC_LIST’
str.c:57: warning: struct has no members
str.c:57: error: storage class specified for parameter ‘ALLOC_TLS’
str.c:60: error: expected specifier-qualifier-list before ‘ALLOC_LIST’
str.c:67: warning: struct has no members
str.c:59: warning: empty declaration
str.c:73: error: expected ‘)’ before ‘*’ token
str.c:74: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘*’ token
str.c:75: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘*’ token
str.c:77: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘{’ token
str.c:85: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘{’ token
str.c:95: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘{’ token
str.c:157: error: storage class specified for parameter ‘pthread_key’
str.c:159: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘{’ token
str.c:163: error: expected ‘)’ before ‘*’ token
str.c:167: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘*’ token
str.c:191: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘{’ token
str.c:198: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘{’ token
str.c:210: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘{’ token
str.c:228: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘{’ token
str.c:262: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘{’ token
str.c:291: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘{’ token
str.c:315: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘{’ token
str.c:326: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘*’ token
common.h:449: warning: type of ‘SSL_COMP’ defaults to ‘int’
str.c:157: error: declaration for parameter ‘pthread_key’ but no such
parameter
str.c:57: error: declaration for parameter ‘ALLOC_TLS’ but no such parameter
str.c:52: error: declaration for parameter ‘ALLOC_LIST’ but no such
parameter
str.c:50: error: declaration for parameter ‘canary_initialized’ but no such
parameter
str.c:49: error: declaration for parameter ‘canary’ but no such parameter
prototypes.h:581: error: declaration for parameter ‘str_printf’ but no such
parameter
prototypes.h:580: error: declaration for parameter ‘str_vprintf’ but no
such parameter
prototypes.h:579: error: declaration for parameter ‘str_dup’ but no such
parameter
prototypes.h:577: error: declaration for parameter ‘str_free_debug’ but no
such parameter
prototypes.h:575: error: declaration for parameter ‘str_detach_debug’ but
no such parameter
prototypes.h:573: error: declaration for parameter ‘str_realloc_debug’ but
no such parameter
prototypes.h:571: error: declaration for parameter ‘str_alloc_debug’ but no
such parameter
prototypes.h:570: error: declaration for parameter ‘str_stats’ but no such
parameter
prototypes.h:569: error: declaration for parameter ‘str_cleanup’ but no
such parameter
prototypes.h:568: error: declaration for parameter ‘str_canary_init’ but no
such parameter
prototypes.h:567: error: declaration for parameter ‘str_init’ but no such
parameter
prototypes.h:562: error: declaration for parameter ‘libwrap_init’ but no
such parameter
prototypes.h:500: error: declaration for parameter ‘create_client’ but no
such parameter
prototypes.h:499: error: declaration for parameter ‘stunnel_thread_id’ but
no such parameter
prototypes.h:498: error: declaration for parameter ‘stunnel_process_id’ but
no such parameter
prototypes.h:497: error: declaration for parameter ‘sthreads_init’ but no
such parameter
prototypes.h:496: error: declaration for parameter ‘leave_critical_section’
but no such parameter
prototypes.h:495: error: declaration for parameter ‘enter_critical_section’
but no such parameter
prototypes.h:493: error: declaration for parameter ‘SECTION_CODE’ but no
such parameter
prototypes.h:463: error: declaration for parameter ‘s_gai_strerror’ but no
such parameter
prototypes.h:452: error: declaration for parameter ‘find_protocol_id’ but
no such parameter
prototypes.h:450: error: declaration for parameter ‘PROTOCOL_TYPE’ but no
such parameter
prototypes.h:425: error: declaration for parameter ‘client_thread’ but no
such parameter
prototypes.h:422: error: declaration for parameter ‘CLI’ but no such
parameter
prototypes.h:395: error: declaration for parameter ‘make_sockets’ but no
such parameter
prototypes.h:394: error: declaration for parameter ‘get_socket_error’ but
no such parameter
prototypes.h:393: error: declaration for parameter ‘set_socket_options’ but
no such parameter
prototypes.h:366: error: declaration for parameter ‘sslerror’ but no such
parameter
prototypes.h:363: error: declaration for parameter ‘UI_DATA’ but no such
parameter
prototypes.h:356: error: declaration for parameter ‘apply_conf’ but no such
parameter
prototypes.h:355: error: declaration for parameter ‘parse_conf’ but no such
parameter
prototypes.h:354: error: declaration for parameter ‘parse_commandline’ but
no such parameter
prototypes.h:349: error: declaration for parameter ‘ssl_init’ but no such
parameter
prototypes.h:347: error: declaration for parameter ‘opt_index’ but no such
parameter
prototypes.h:347: error: declaration for parameter ‘cli_index’ but no such
parameter
prototypes.h:343: error: declaration for parameter ‘pty_allocate’ but no
such parameter
prototypes.h:339: error: declaration for parameter ‘s_strerror’ but no such
parameter
prototypes.h:338: error: declaration for parameter ‘log_error’ but no such
parameter
prototypes.h:337: error: declaration for parameter ‘sockerror’ but no such
parameter
prototypes.h:336: error: declaration for parameter ‘ioerror’ but no such
parameter
prototypes.h:334: error: declaration for parameter ‘fatal_debug’ but no
such parameter
prototypes.h:328: error: declaration for parameter ‘s_log’ but no such
parameter
prototypes.h:327: error: declaration for parameter ‘log_flush’ but no such
parameter
prototypes.h:326: error: declaration for parameter ‘log_close’ but no such
parameter
prototypes.h:325: error: declaration for parameter ‘log_open’ but no such
parameter
prototypes.h:323: error: declaration for parameter ‘syslog_close’ but no
such parameter
prototypes.h:322: error: declaration for parameter ‘syslog_open’ but no
such parameter
prototypes.h:317: error: declaration for parameter ‘set_nonblock’ but no
such parameter
prototypes.h:316: error: declaration for parameter ‘s_accept’ but no such
parameter
prototypes.h:315: error: declaration for parameter ‘s_socketpair’ but no
such parameter
prototypes.h:314: error: declaration for parameter ‘s_pipe’ but no such
parameter
prototypes.h:313: error: declaration for parameter ‘s_socket’ but no such
parameter
prototypes.h:311: error: declaration for parameter ‘get_limits’ but no such
parameter
prototypes.h:306: error: declaration for parameter ‘stunnel_info’ but no
such parameter
prototypes.h:304: error: declaration for parameter ‘child_status’ but no
such parameter
prototypes.h:302: error: declaration for parameter ‘signal_post’ but no
such parameter
prototypes.h:300: error: declaration for parameter ‘drop_privileges’ but no
such parameter
prototypes.h:298: error: declaration for parameter ‘bind_ports’ but no such
parameter
prototypes.h:297: error: declaration for parameter ‘unbind_ports’ but no
such parameter
prototypes.h:296: error: declaration for parameter ‘daemon_loop’ but no
such parameter
prototypes.h:295: error: declaration for parameter ‘main_configure’ but no
such parameter
prototypes.h:294: error: declaration for parameter ‘main_initialize’ but no
such parameter
prototypes.h:291: error: declaration for parameter ‘num_clients’ but no
such parameter
prototypes.h:290: error: declaration for parameter ‘max_clients’ but no
such parameter
prototypes.h:285: error: declaration for parameter ‘FD’ but no such
parameter
prototypes.h:278: error: declaration for parameter ‘DISK_FILE’ but no such
parameter
prototypes.h:269: error: declaration for parameter ‘s_poll_set’ but no such
parameter
prototypes.h:256: error: declaration for parameter ‘CONF_TYPE’ but no such
parameter
prototypes.h:252: error: declaration for parameter ‘SOCK_OPT’ but no such
parameter
prototypes.h:244: error: declaration for parameter ‘OPT_UNION’ but no such
parameter
prototypes.h:236: error: declaration for parameter ‘VAL_TYPE’ but no such
parameter
prototypes.h:222: error: declaration for parameter ‘SERVICE_OPTIONS’ but no
such parameter
prototypes.h:114: error: declaration for parameter ‘GLOBAL_OPTIONS’ but no
such parameter
prototypes.h:72: error: declaration for parameter ‘COMP_TYPE’ but no such
parameter
prototypes.h:67: error: declaration for parameter ‘SOCKADDR_LIST’ but no
such parameter
prototypes.h:61: error: declaration for parameter ‘SOCKADDR_UNION’ but no
such parameter
prototypes.h:50: error: declaration for parameter ‘LOG_MODE’ but no such
parameter
str.c:342: error: expected ‘{’ at end of input
common.h:449: warning: unused parameter ‘SSL_COMP’
str.c:157: warning: unused parameter ‘pthread_key’
str.c:57: warning: unused parameter ‘ALLOC_TLS’
str.c:52: warning: unused parameter ‘ALLOC_LIST’
str.c:50: warning: unused parameter ‘canary_initialized’
str.c:49: warning: unused parameter ‘canary’
prototypes.h:581: warning: unused parameter ‘str_printf’
prototypes.h:580: warning: unused parameter ‘str_vprintf’
prototypes.h:579: warning: unused parameter ‘str_dup’
prototypes.h:577: warning: unused parameter ‘str_free_debug’
prototypes.h:575: warning: unused parameter ‘str_detach_debug’
prototypes.h:573: warning: unused parameter ‘str_realloc_debug’
prototypes.h:571: warning: unused parameter ‘str_alloc_debug’
prototypes.h:570: warning: unused parameter ‘str_stats’
prototypes.h:569: warning: unused parameter ‘str_cleanup’
prototypes.h:568: warning: unused parameter ‘str_canary_init’
prototypes.h:567: warning: unused parameter ‘str_init’
prototypes.h:562: warning: unused parameter ‘libwrap_init’
prototypes.h:500: warning: unused parameter ‘create_client’
prototypes.h:499: warning: unused parameter ‘stunnel_thread_id’
prototypes.h:498: warning: unused parameter ‘stunnel_process_id’
prototypes.h:497: warning: unused parameter ‘sthreads_init’
prototypes.h:496: warning: unused parameter ‘leave_critical_section’
prototypes.h:495: warning: unused parameter ‘enter_critical_section’
prototypes.h:493: warning: unused parameter ‘SECTION_CODE’
prototypes.h:463: warning: unused parameter ‘s_gai_strerror’
prototypes.h:452: warning: unused parameter ‘find_protocol_id’
prototypes.h:450: warning: unused parameter ‘PROTOCOL_TYPE’
prototypes.h:425: warning: unused parameter ‘client_thread’
prototypes.h:422: warning: unused parameter ‘CLI’
prototypes.h:395: warning: unused parameter ‘make_sockets’
prototypes.h:394: warning: unused parameter ‘get_socket_error’
prototypes.h:393: warning: unused parameter ‘set_socket_options’
prototypes.h:366: warning: unused parameter ‘sslerror’
prototypes.h:363: warning: unused parameter ‘UI_DATA’
prototypes.h:356: warning: unused parameter ‘apply_conf’
prototypes.h:355: warning: unused parameter ‘parse_conf’
prototypes.h:354: warning: unused parameter ‘parse_commandline’
prototypes.h:349: warning: unused parameter ‘ssl_init’
prototypes.h:347: warning: unused parameter ‘opt_index’
prototypes.h:347: warning: unused parameter ‘cli_index’
prototypes.h:343: warning: unused parameter ‘pty_allocate’
prototypes.h:339: warning: unused parameter ‘s_strerror’
prototypes.h:338: warning: unused parameter ‘log_error’
prototypes.h:337: warning: unused parameter ‘sockerror’
prototypes.h:336: warning: unused parameter ‘ioerror’
prototypes.h:334: warning: unused parameter ‘fatal_debug’
prototypes.h:328: warning: unused parameter ‘s_log’
prototypes.h:327: warning: unused parameter ‘log_flush’
prototypes.h:326: warning: unused parameter ‘log_close’
prototypes.h:325: warning: unused parameter ‘log_open’
prototypes.h:323: warning: unused parameter ‘syslog_close’
prototypes.h:322: warning: unused parameter ‘syslog_open’
prototypes.h:317: warning: unused parameter ‘set_nonblock’
prototypes.h:316: warning: unused parameter ‘s_accept’
prototypes.h:315: warning: unused parameter ‘s_socketpair’
prototypes.h:314: warning: unused parameter ‘s_pipe’
prototypes.h:313: warning: unused parameter ‘s_socket’
prototypes.h:311: warning: unused parameter ‘get_limits’
prototypes.h:306: warning: unused parameter ‘stunnel_info’
prototypes.h:304: warning: unused parameter ‘child_status’
prototypes.h:302: warning: unused parameter ‘signal_post’
prototypes.h:300: warning: unused parameter ‘drop_privileges’
prototypes.h:298: warning: unused parameter ‘bind_ports’
prototypes.h:297: warning: unused parameter ‘unbind_ports’
prototypes.h:296: warning: unused parameter ‘daemon_loop’
prototypes.h:295: warning: unused parameter ‘main_configure’
prototypes.h:294: warning: unused parameter ‘main_initialize’
prototypes.h:291: warning: unused parameter ‘num_clients’
prototypes.h:290: warning: unused parameter ‘max_clients’
prototypes.h:285: warning: unused parameter ‘FD’
prototypes.h:278: warning: unused parameter ‘DISK_FILE’
prototypes.h:269: warning: unused parameter ‘s_poll_set’
prototypes.h:256: warning: unused parameter ‘CONF_TYPE’
prototypes.h:252: warning: unused parameter ‘SOCK_OPT’
prototypes.h:244: warning: unused parameter ‘OPT_UNION’
prototypes.h:236: warning: unused parameter ‘VAL_TYPE’
prototypes.h:222: warning: unused parameter ‘SERVICE_OPTIONS’
prototypes.h:114: warning: unused parameter ‘GLOBAL_OPTIONS’
prototypes.h:72: warning: unused parameter ‘COMP_TYPE’
prototypes.h:67: warning: unused parameter ‘SOCKADDR_LIST’
prototypes.h:61: warning: unused parameter ‘SOCKADDR_UNION’
prototypes.h:50: warning: unused parameter ‘LOG_MODE’
make[2]: *** [stunnel-str.o] Error 1
make[2]: Leaving directory `/root/stunnel-4.53/src'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/root/stunnel-4.53/src'
make: *** [all-recursive] Error 1
[root@localhost stunnel-4.53]#
~Yours,
Scott
1
0
Hi,
I'm having trouble using SNI with protocol=proxy.
Stunnel seems to ignore protocol option defined in
the 'children', for example now protocol will be ignored:
[https_default]
accept = 443
connect = 10443
cert = a.crt
key = a.key
[https_one]
sni = https_default:one.org
protocol = proxy
connect = 10444
cert = one.crt
key = one.key
On the other hand when defined on the 'default' resource,
the connect option seems to be ignored:
[https_default]
accept = 443
protocol = proxy
connect = 10443
cert = a.crt
key = a.key
[https_one]
sni = https_default:one.org
connect = 10444 ;; nope! still 10443
cert = one.crt
key = one.key
Any suggestions?
Cheers,
Marek
3
6
Hi,
We have an existing RMI server which is not SSL aware and is based on Java
version 1.4.1. We want to use stunnel to make this existing RMI server SSL
aware. Checking the official website of stunnel the support to following
protocols were found cifs , connect, imap, nntp, pgsql, pop3, proxy and
smtp. As no reference to JRMP was available, wondering if stunnel can be
used to make the existing non SSL RMI server SSL aware.
If this is possible then we belive that it would be achived by providing
the mapping between the port configured with stunel and the existing port
used by RMI. Also the eixsitng RMI server would have to undergo minial
change using this approach.
Your help is highly appreciated.
Thanks in advance.
Best Regards,
Anoop
1
0
Hi All,
A clean compile is a security gate for me, and I'm having problems
meeting the goal on a Fedora 14 box (x64).
Jeff
[jeffrey@studio stunnel-4.53]$ ./configure CFLAGS="-Wall -Wextra
-Wconversion -Wformat=2 -Wformat-security -fstack-protector-all
-Wl,-z,relro -Wl,-z,now -Wl,-z,noexecstack -Wl,-z,noexecheap"
configure: **************************************** initialization
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
...
configure: **************************************** success
[jeffrey@studio stunnel-4.53]$ make clean
[jeffrey@studio stunnel-4.53]$ make
Making all in src
make[1]: Entering directory `/home/jeffrey/stunnel-4.53/src'
make all-am
make[2]: Entering directory `/home/jeffrey/stunnel-4.53/src'
/bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I.
-Wall -Wextra -Wconversion -Wformat=2 -Wformat-security
-fstack-protector-all -Wl,-z,relro -Wl,-z,now -Wl,-z,noexecstack
-Wl,-z,noexecheap -Wall -Wextra -Wno-long-long -pedantic -MT env.lo
-MD -MP -MF .deps/env.Tpo -c -o env.lo env.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Wextra -Wconversion
-Wformat=2 -Wformat-security -fstack-protector-all -Wl,-z,relro
-Wl,-z,now -Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra
-Wno-long-long -pedantic -MT env.lo -MD -MP -MF .deps/env.Tpo -c env.c
-fPIC -DPIC -o .libs/env.o
env.c: In function ‘getpeername’:
env.c:64:9: warning: conversion to ‘uint16_t’ from ‘int’ may alter its value
mv -f .deps/env.Tpo .deps/env.Plo
/bin/sh ../libtool --tag=CC --mode=link gcc -Wall -Wextra
-Wconversion -Wformat=2 -Wformat-security -fstack-protector-all
-Wl,-z,relro -Wl,-z,now -Wl,-z,noexecstack -Wl,-z,noexecheap -Wall
-Wextra -Wno-long-long -pedantic -avoid-version -o libstunnel.la
-rpath /usr/local/lib/stunnel env.lo -lz -ldl -lutil -lnsl -lpthread
libtool: link: gcc -shared .libs/env.o -lz -ldl -lutil -lnsl
-lpthread -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-z -Wl,noexecstack
-Wl,-z -Wl,noexecheap -Wl,-soname -Wl,libstunnel.so -o
.libs/libstunnel.so
libtool: link: ( cd ".libs" && rm -f "libstunnel.la" && ln -s
"../libstunnel.la" "libstunnel.la" )
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-str.o -MD -MP -MF .deps/stunnel-str.Tpo -c -o
stunnel-str.o `test -f 'str.c' || echo './'`str.c
str.c: In function ‘str_vprintf’:
str.c:100:5: warning: conversion to ‘size_t’ from ‘int’ may change the
sign of the result
str.c:103:9: warning: conversion to ‘size_t’ from ‘int’ may change the
sign of the result
str.c:110:9: warning: conversion to ‘size_t’ from ‘int’ may change the
sign of the result
mv -f .deps/stunnel-str.Tpo .deps/stunnel-str.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-file.o -MD -MP -MF .deps/stunnel-file.Tpo -c -o
stunnel-file.o `test -f 'file.c' || echo './'`file.c
file.c: In function ‘file_getline’:
file.c:136:9: warning: conversion to ‘int’ from ‘ssize_t’ may alter its value
file.c: In function ‘file_putline’:
file.c:162:5: warning: conversion to ‘int’ from ‘size_t’ may alter its value
file.c:163:5: warning: conversion to ‘size_t’ from ‘int’ may change
the sign of the result
file.c:173:5: warning: conversion to ‘size_t’ from ‘int’ may change
the sign of the result
file.c:173:5: warning: conversion to ‘int’ from ‘ssize_t’ may alter its value
mv -f .deps/stunnel-file.Tpo .deps/stunnel-file.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-client.o -MD -MP -MF .deps/stunnel-client.Tpo -c
-o stunnel-client.o `test -f 'client.c' || echo './'`client.c
client.c: In function ‘transfer’:
client.c:647:13: warning: conversion to ‘size_t’ from ‘int’ may change
the sign of the result
client.c:647:13: warning: conversion to ‘int’ from ‘ssize_t’ may alter its value
client.c:665:13: warning: conversion to ‘size_t’ from ‘int’ may change
the sign of the result
client.c:665:13: warning: conversion to ‘int’ from ‘ssize_t’ may alter its value
client.c:675:17: warning: conversion to ‘size_t’ from ‘int’ may change
the sign of the result
client.c:750:17: warning: conversion to ‘size_t’ from ‘int’ may change
the sign of the result
client.c: In function ‘auth_user’:
client.c:930:9: warning: conversion to ‘in_port_t’ from ‘int’ may
alter its value
client.c: In function ‘connect_remote’:
client.c:1110:13: warning: conversion to ‘u16’ from ‘int’ may alter its value
mv -f .deps/stunnel-client.Tpo .deps/stunnel-client.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-log.o -MD -MP -MF .deps/stunnel-log.Tpo -c -o
stunnel-log.o `test -f 'log.c' || echo './'`log.c
mv -f .deps/stunnel-log.Tpo .deps/stunnel-log.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-options.o -MD -MP -MF .deps/stunnel-options.Tpo
-c -o stunnel-options.o `test -f 'options.c' || echo './'`options.c
options.c: In function ‘parse_global_option’:
options.c:362:9: warning: conversion to ‘int’ from ‘long int’ may
alter its value
options.c:448:13: warning: conversion to ‘int’ from ‘__gid_t’ may
change the sign of the result
options.c:451:9: warning: conversion to ‘int’ from ‘long int’ may
alter its value
options.c:474:13: warning: conversion to ‘int’ from ‘__uid_t’ may
change the sign of the result
options.c:477:9: warning: conversion to ‘int’ from ‘long int’ may
alter its value
options.c: In function ‘parse_service_option’:
options.c:840:9: warning: conversion to ‘int’ from ‘long int’ may
alter its value
options.c:1039:9: warning: conversion to ‘int’ from ‘long unsigned
int’ may alter its value
options.c:1042:9: warning: conversion to ‘long unsigned int’ from
‘int’ may change the sign of the result
options.c:1346:9: warning: conversion to ‘int’ from ‘long int’ may
alter its value
options.c:1367:9: warning: conversion to ‘int’ from ‘long int’ may
alter its value
options.c:1387:9: warning: conversion to ‘int’ from ‘long int’ may
alter its value
options.c:1408:9: warning: conversion to ‘int’ from ‘long int’ may
alter its value
options.c:1428:9: warning: conversion to ‘int’ from ‘long int’ may
alter its value
options.c:1485:9: warning: conversion to ‘int’ from ‘long int’ may
alter its value
options.c: In function ‘parse_conf’:
options.c:1585:9: warning: conversion to ‘int’ from ‘long int’ may
alter its value
options.c:1620:9: warning: conversion to ‘int’ from ‘size_t’ may alter its value
options.c:1651:9: warning: conversion to ‘int’ from ‘size_t’ may alter its value
options.c: In function ‘parse_ssl_option’:
options.c:2004:13: warning: conversion to ‘int’ from ‘long int’ may
alter its value
options.c: In function ‘parse_socket_option’:
options.c:2162:9: warning: conversion to ‘int’ from ‘long int’ may
alter its value
options.c: In function ‘argalloc’:
options.c:2391:5: warning: conversion to ‘int’ from ‘size_t’ may alter its value
options.c:2393:5: warning: conversion to ‘long unsigned int’ from
‘int’ may change the sign of the result
mv -f .deps/stunnel-options.Tpo .deps/stunnel-options.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-protocol.o -MD -MP -MF
.deps/stunnel-protocol.Tpo -c -o stunnel-protocol.o `test -f
'protocol.c' || echo './'`protocol.c
protocol.c: In function ‘cifs_server’:
protocol.c:200:5: warning: conversion to ‘u16’ from ‘int’ may alter its value
protocol.c: In function ‘connect_client’:
protocol.c:531:13: warning: conversion to ‘int’ from ‘size_t’ may
alter its value
protocol.c: In function ‘ntlm’:
protocol.c:607:9: warning: conversion to ‘int’ from ‘long int’ may
alter its value
protocol.c: In function ‘ntlm3’:
protocol.c:640:5: warning: conversion to ‘unsigned int’ from ‘size_t’
may alter its value
protocol.c:641:5: warning: conversion to ‘unsigned int’ from ‘long
unsigned int’ may alter its value
protocol.c:647:5: warning: conversion to ‘char’ from ‘unsigned int’
may alter its value
protocol.c:651:5: warning: conversion to ‘char’ from ‘unsigned int’
may alter its value
protocol.c:652:5: warning: conversion to ‘char’ from ‘unsigned int’
may alter its value
protocol.c:653:5: warning: conversion to ‘char’ from ‘unsigned int’
may alter its value
protocol.c:655:5: warning: conversion to ‘char’ from ‘unsigned int’
may alter its value
protocol.c:656:5: warning: conversion to ‘char’ from ‘unsigned int’
may alter its value
protocol.c:670:5: warning: conversion to ‘int’ from ‘size_t’ may alter its value
protocol.c:683:5: warning: conversion to ‘int’ from ‘unsigned int’ may
change the sign of the result
protocol.c: In function ‘crypt_DES’:
protocol.c:692:5: warning: conversion to ‘unsigned char’ from ‘int’
may alter its value
protocol.c:693:5: warning: conversion to ‘unsigned char’ from ‘int’
may alter its value
protocol.c:694:5: warning: conversion to ‘unsigned char’ from ‘int’
may alter its value
protocol.c:695:5: warning: conversion to ‘unsigned char’ from ‘int’
may alter its value
protocol.c:696:5: warning: conversion to ‘unsigned char’ from ‘int’
may alter its value
protocol.c:697:5: warning: conversion to ‘unsigned char’ from ‘int’
may alter its value
protocol.c:698:5: warning: conversion to ‘unsigned char’ from ‘int’
may alter its value
protocol.c: In function ‘base64’:
protocol.c:736:5: warning: conversion to ‘size_t’ from ‘int’ may
change the sign of the result
mv -f .deps/stunnel-protocol.Tpo .deps/stunnel-protocol.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-network.o -MD -MP -MF .deps/stunnel-network.Tpo
-c -o stunnel-network.o `test -f 'network.c' || echo './'`network.c
network.c: In function ‘set_socket_options’:
network.c:376:13: warning: conversion to ‘int’ from ‘size_t’ may alter its value
network.c:382:17: warning: conversion to ‘socklen_t’ from ‘int’ may
change the sign of the result
network.c: In function ‘write_blocking’:
network.c:492:9: warning: conversion to ‘size_t’ from ‘int’ may change
the sign of the result
network.c:492:9: warning: conversion to ‘int’ from ‘ssize_t’ may alter its value
network.c: In function ‘read_blocking’:
network.c:524:9: warning: conversion to ‘size_t’ from ‘int’ may change
the sign of the result
network.c:524:9: warning: conversion to ‘int’ from ‘ssize_t’ may alter its value
network.c: In function ‘fd_putline’:
network.c:544:5: warning: conversion to ‘int’ from ‘size_t’ may alter its value
network.c: In function ‘fd_getline’:
network.c:576:9: warning: conversion to ‘size_t’ from ‘int’ may change
the sign of the result
mv -f .deps/stunnel-network.Tpo .deps/stunnel-network.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-resolver.o -MD -MP -MF
.deps/stunnel-resolver.Tpo -c -o stunnel-resolver.o `test -f
'resolver.c' || echo './'`resolver.c
resolver.c: In function ‘name2addrlist’:
resolver.c:124:9: warning: conversion to ‘long unsigned int’ from
‘int’ may change the sign of the result
resolver.c: In function ‘hostport2addrlist’:
resolver.c:190:9: warning: conversion to ‘long unsigned int’ from
‘int’ may change the sign of the result
mv -f .deps/stunnel-resolver.Tpo .deps/stunnel-resolver.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-ssl.o -MD -MP -MF .deps/stunnel-ssl.Tpo -c -o
stunnel-ssl.o `test -f 'ssl.c' || echo './'`ssl.c
mv -f .deps/stunnel-ssl.Tpo .deps/stunnel-ssl.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-ctx.o -MD -MP -MF .deps/stunnel-ctx.Tpo -c -o
stunnel-ctx.o `test -f 'ctx.c' || echo './'`ctx.c
ctx.c: In function ‘context_init’:
ctx.c:119:9: warning: conversion to ‘unsigned int’ from ‘size_t’ may
alter its value
ctx.c: In function ‘password_cb’:
ctx.c:431:9: warning: conversion to ‘size_t’ from ‘int’ may change the
sign of the result
ctx.c:434:9: warning: conversion to ‘size_t’ from ‘int’ may change the
sign of the result
ctx.c:436:9: warning: conversion to ‘int’ from ‘size_t’ may alter its value
ctx.c: In function ‘sess_new_cb’:
ctx.c:455:5: warning: conversion to ‘size_t’ from ‘int’ may change the
sign of the result
ctx.c:459:9: warning: conversion to ‘unsigned int’ from ‘long int’ may
alter its value
ctx.c:459:9: warning: conversion to ‘unsigned int’ from ‘int’ may
change the sign of the result
ctx.c: In function ‘sess_get_cb’:
ctx.c:472:9: warning: conversion to ‘unsigned int’ from ‘int’ may
change the sign of the result
ctx.c: In function ‘cache_transfer’:
ctx.c:540:5: warning: conversion to ‘u_char’ from ‘unsigned int’ may
alter its value
ctx.c:579:5: warning: conversion to ‘int’ from ‘ssize_t’ may alter its value
ctx.c:604:5: warning: conversion to ‘long unsigned int’ from ‘int’ may
change the sign of the result
ctx.c:604:5: warning: conversion to ‘unsigned int’ from ‘long unsigned
int’ may alter its value
mv -f .deps/stunnel-ctx.Tpo .deps/stunnel-ctx.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-verify.o -MD -MP -MF .deps/stunnel-verify.Tpo -c
-o stunnel-verify.o `test -f 'verify.c' || echo './'`verify.c
verify.c: In function ‘cert_check’:
verify.c:246:17: warning: conversion to ‘size_t’ from ‘int’ may change
the sign of the result
verify.c: In function ‘log_time’:
verify.c:528:5: warning: conversion to ‘size_t’ from ‘int’ may change
the sign of the result
mv -f .deps/stunnel-verify.Tpo .deps/stunnel-verify.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-sthreads.o -MD -MP -MF
.deps/stunnel-sthreads.Tpo -c -o stunnel-sthreads.o `test -f
'sthreads.c' || echo './'`sthreads.c
sthreads.c: In function ‘create_client’:
sthreads.c:318:5: warning: conversion to ‘size_t’ from ‘int’ may
change the sign of the result
mv -f .deps/stunnel-sthreads.Tpo .deps/stunnel-sthreads.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-fd.o -MD -MP -MF .deps/stunnel-fd.Tpo -c -o
stunnel-fd.o `test -f 'fd.c' || echo './'`fd.c
fd.c: In function ‘get_limits’:
fd.c:64:5: warning: conversion to ‘int’ from ‘long int’ may alter its value
mv -f .deps/stunnel-fd.Tpo .deps/stunnel-fd.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-stunnel.o -MD -MP -MF .deps/stunnel-stunnel.Tpo
-c -o stunnel-stunnel.o `test -f 'stunnel.c' || echo './'`stunnel.c
stunnel.c: In function ‘drop_privileges’:
stunnel.c:410:9: warning: conversion to ‘__gid_t’ from ‘int’ may
change the sign of the result
stunnel.c:415:9: warning: conversion to ‘gid_t’ from ‘int’ may change
the sign of the result
stunnel.c:423:9: warning: conversion to ‘__uid_t’ from ‘int’ may
change the sign of the result
mv -f .deps/stunnel-stunnel.Tpo .deps/stunnel-stunnel.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-pty.o -MD -MP -MF .deps/stunnel-pty.Tpo -c -o
stunnel-pty.o `test -f 'pty.c' || echo './'`pty.c
mv -f .deps/stunnel-pty.Tpo .deps/stunnel-pty.Po
gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include
-DLIBDIR='"/usr/local/lib/stunnel"'
-DCONFDIR='"/usr/local/etc/stunnel"'
-DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -MT stunnel-libwrap.o -MD -MP -MF .deps/stunnel-libwrap.Tpo
-c -o stunnel-libwrap.o `test -f 'libwrap.c' || echo './'`libwrap.c
mv -f .deps/stunnel-libwrap.Tpo .deps/stunnel-libwrap.Po
/bin/sh ../libtool --tag=CC --mode=link gcc -pthread
-fstack-protector -fPIE -Wall -Wextra -Wconversion -Wformat=2
-Wformat-security -fstack-protector-all -Wl,-z,relro -Wl,-z,now
-Wl,-z,noexecstack -Wl,-z,noexecheap -Wall -Wextra -Wno-long-long
-pedantic -L/usr//lib64 -L/usr//lib -lssl -lcrypto -o stunnel
stunnel-str.o stunnel-file.o stunnel-client.o stunnel-log.o
stunnel-options.o stunnel-protocol.o stunnel-network.o
stunnel-resolver.o stunnel-ssl.o stunnel-ctx.o stunnel-verify.o
stunnel-sthreads.o stunnel-fd.o stunnel-stunnel.o stunnel-pty.o
stunnel-libwrap.o -lz -ldl -lutil -lnsl -lpthread
libtool: link: gcc -pthread -fstack-protector -fPIE -Wall -Wextra
-Wconversion -Wformat=2 -Wformat-security -fstack-protector-all -Wl,-z
-Wl,relro -Wl,-z -Wl,now -Wl,-z -Wl,noexecstack -Wl,-z -Wl,noexecheap
-Wall -Wextra -Wno-long-long -pedantic -o stunnel stunnel-str.o
stunnel-file.o stunnel-client.o stunnel-log.o stunnel-options.o
stunnel-protocol.o stunnel-network.o stunnel-resolver.o stunnel-ssl.o
stunnel-ctx.o stunnel-verify.o stunnel-sthreads.o stunnel-fd.o
stunnel-stunnel.o stunnel-pty.o stunnel-libwrap.o -L/usr//lib64
-L/usr//lib -lssl -lcrypto -lz -ldl -lutil -lnsl -lpthread -pthread
make[2]: Leaving directory `/home/jeffrey/stunnel-4.53/src'
make[1]: Leaving directory `/home/jeffrey/stunnel-4.53/src'
Making all in doc
make[1]: Entering directory `/home/jeffrey/stunnel-4.53/doc'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/jeffrey/stunnel-4.53/doc'
Making all in tools
make[1]: Entering directory `/home/jeffrey/stunnel-4.53/tools'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/jeffrey/stunnel-4.53/tools'
make[1]: Entering directory `/home/jeffrey/stunnel-4.53'
make[1]: Nothing to be done for `all-am'.
make[1]: Leaving directory `/home/jeffrey/stunnel-4.53'
[jeffrey@studio stunnel-4.53]$
2
1