Hallo,
I have found 2 Bugs.
1. In Version 4.21: No Taskbar Icon is displayed when the service starts. Although the taskbar ist set in config file (taskbar = yes).
2. In probably all Versions (I have testet 4.18, 4.20 and 4.21) If i started the service over Start -> Programm Files -> stunnel -> Service Start (stunnel -start) no log files are written. If i start the service over services.msc from Windows or "sc start stunnel" log files are written.
The icon log displayed the following message in version 4.18 and 4.20 2007.11.09 09:41:03 LOG3[2396:2400]: stunnel.log: Broken pipe (32) 2007.11.09 09:41:03 LOG3[2396:2400]: Unable to open output file: stunnel.log
Best Regards Jan
[email protected] wrote:
- In Version 4.21:
No Taskbar Icon is displayed when the service starts. Although the taskbar ist set in config file (taskbar = yes).
It's not a bug. It's a feature. Any object (icon, window, etc.) displayed by a service may be exploited by a local user to gain privileges of this user (in this case usually LocalSystem).
- In probably all Versions (I have testet 4.18, 4.20 and 4.21)
If i started the service over Start -> Programm Files -> stunnel -> Service Start (stunnel -start) no log files are written. If i start the service over services.msc from Windows or "sc start stunnel" log files are written.
The icon log displayed the following message in version 4.18 and 4.20 2007.11.09 09:41:03 LOG3[2396:2400]: stunnel.log: Broken pipe (32) 2007.11.09 09:41:03 LOG3[2396:2400]: Unable to open output file: stunnel.log
Did you try to specify full file path (e.g. c:\stunnel.log)?
Best regards, Mike
The second Bug appears also with full specified path. There will be a problem in Version 4.2x > 4.21 to find the log, because this message is not be logged the log-file, only in the Icon log which is not available in 4.21.
2007.11.12 08:43:20 LOG3[2696:2700]: c:\Programme\stunnel\logs\stunnel.log: Broken pipe (32) 2007.11.12 08:43:20 LOG3[2696:2700]: Unable to open output file: c:\Programme\stunnel\logs\stunnel.log
Best Regards Jan
-----Ursprüngliche Nachricht----- Von: [email protected] [mailto:[email protected]] Im Auftrag von Michal Trojnara Gesendet: Freitag, 9. November 2007 22:25 An: [email protected] Betreff: Re: [stunnel-users] Bugs
[email protected] wrote:
- In Version 4.21:
No Taskbar Icon is displayed when the service starts. Although the taskbar ist set in config file (taskbar = yes).
It's not a bug. It's a feature. Any object (icon, window, etc.) displayed by a service may be exploited by a local user to gain privileges of this user (in this case usually LocalSystem).
- In probably all Versions (I have testet 4.18, 4.20 and 4.21) If i
started the service over Start -> Programm Files -> stunnel -> Service Start (stunnel -start) no log files are written. If i start the service over services.msc from Windows or "sc start stunnel" log files are written.
The icon log displayed the following message in version 4.18 and 4.20 2007.11.09 09:41:03 LOG3[2396:2400]: stunnel.log: Broken pipe (32) 2007.11.09 09:41:03 LOG3[2396:2400]: Unable to open output file: stunnel.log
Did you try to specify full file path (e.g. c:\stunnel.log)?
Best regards, Mike
A wild guess: is it truncating your "Program Files" path? I don't know what it is called in German, but "c:\Programme\stunnel" looks too short to me. Try using quotes, short path names and/or forward slashes instead of bakslashes.
Best regards.
On Mon, 2007-11-12 at 09:32 +0100, [email protected] wrote:
The second Bug appears also with full specified path. There will be a problem in Version 4.2x > 4.21 to find the log, because this message is not be logged the log-file, only in the Icon log which is not available in 4.21.
2007.11.12 08:43:20 LOG3[2696:2700]: c:\Programme\stunnel\logs\stunnel.log: Broken pipe (32) 2007.11.12 08:43:20 LOG3[2696:2700]: Unable to open output file: c:\Programme\stunnel\logs\stunnel.log
Best Regards Jan
-----Ursprüngliche Nachricht----- Von: [email protected] [mailto:[email protected]] Im Auftrag von Michal Trojnara Gesendet: Freitag, 9. November 2007 22:25 An: [email protected] Betreff: Re: [stunnel-users] Bugs
[email protected] wrote:
- In Version 4.21:
No Taskbar Icon is displayed when the service starts. Although the taskbar ist set in config file (taskbar = yes).
It's not a bug. It's a feature. Any object (icon, window, etc.) displayed by a service may be exploited by a local user to gain privileges of this user (in this case usually LocalSystem).
- In probably all Versions (I have testet 4.18, 4.20 and 4.21) If i
started the service over Start -> Programm Files -> stunnel -> Service Start (stunnel -start) no log files are written. If i start the service over services.msc from Windows or "sc start stunnel" log files are written.
The icon log displayed the following message in version 4.18 and 4.20 2007.11.09 09:41:03 LOG3[2396:2400]: stunnel.log: Broken pipe (32) 2007.11.09 09:41:03 LOG3[2396:2400]: Unable to open output file: stunnel.log
Did you try to specify full file path (e.g. c:\stunnel.log)?
Best regards, Mike _______________________________________________ stunnel-users mailing list [email protected] http://stunnel.mirt.net/mailman/listinfo/stunnel-users
Hallo,
i tried both, another path and forward slashes and it does not work. The following message still appears:
c:\Programme\stunnel\logs\stunnel.log: Broken pipe (32) Unable to open output file: c:\Programme\stunnel\logs\stunnel.log
What happens if you start the Service over "stunnel.exe -start"? Do you get the same message?
Best Regards
________________________________
Von: Gonzalo Diethelm [mailto:[email protected]] Gesendet: Montag, 12. November 2007 15:22 An: Häring, Jan (KIRU) Cc: [email protected] Betreff: Re: [stunnel-users] Bugs
A wild guess: is it truncating your "Program Files" path? I don't know what it is called in German, but "c:\Programme\stunnel" looks too short to me. Try using quotes, short path names and/or forward slashes instead of bakslashes.
Best regards.
On Mon, 2007-11-12 at 09:32 +0100, [email protected] wrote:
The second Bug appears also with full specified path. There will be a problem in Version 4.2x > 4.21 to find the log, because this message is not be logged the log-file, only in the Icon log which is not available in 4.21. 2007.11.12 08:43:20 LOG3[2696:2700]: c:\Programme\stunnel\logs\stunnel.log: Broken pipe (32) 2007.11.12 08:43:20 LOG3[2696:2700]: Unable to open output file: c:\Programme\stunnel\logs\stunnel.log Best Regards Jan -----Ursprüngliche Nachricht----- Von: [email protected] [mailto:[email protected]] Im Auftrag von Michal Trojnara Gesendet: Freitag, 9. November 2007 22:25 An: [email protected] Betreff: Re: [stunnel-users] Bugs [email protected] wrote: > 1. In Version 4.21: > No Taskbar Icon is displayed when the service starts. Although the > taskbar ist set in config file (taskbar = yes). It's not a bug. It's a feature. Any object (icon, window, etc.) displayed by a service may be exploited by a local user to gain privileges of this user (in this case usually LocalSystem). > 2. In probably all Versions (I have testet 4.18, 4.20 and 4.21) If i > started the service over Start -> Programm Files -> stunnel -> Service > Start (stunnel -start) no log files are written. If i start the > service over services.msc from Windows or "sc start stunnel" log files are written. > > The icon log displayed the following message in version 4.18 and 4.20 > 2007.11.09 09:41:03 LOG3[2396:2400]: stunnel.log: Broken pipe (32) > 2007.11.09 09:41:03 LOG3[2396:2400]: Unable to open output file: > stunnel.log Did you try to specify full file path (e.g. c:\stunnel.log)? Best regards, Mike _______________________________________________ stunnel-users mailing list [email protected] http://stunnel.mirt.net/mailman/listinfo/stunnel-users
I installed in C:\Program Files, and copied the folder stunnel to somewhere else such as c:\non_microsoft; then uninstall the stunnel; running the program (double click the stunnel.exe) from c:\non_microsoft\stunnel;
it works fine
jz
----- Original Message ---------------
Return-Path: [email protected] Received: from linode.mirt.net ([64.22.71.125]) by ellingtongeologic.com for [email protected]; Wed, 14 Nov 2007 05:33:02 -0800 Received: from linode.mirt.net (localhost [127.0.0.1]) by linode.mirt.net (Postfix) with ESMTP id A851C1C24D; Wed, 14 Nov 2007 14:32:03 +0100 (CET) Received: from linode.mirt.net (localhost [127.0.0.1]) by linode.mirt.net (Postfix) with ESMTP id BEA251C238; Wed, 14 Nov 2007 14:31:59 +0100 (CET) X-Original-To: [email protected] Delivered-To: [email protected] Received: from linode.mirt.net (localhost [127.0.0.1]) by linode.mirt.net (Postfix) with ESMTP id 522DC1C233 for [email protected]; Wed, 14 Nov 2007 14:31:56 +0100 (CET) Received: from i1rrzssmtp05v.rz-as.de (i1rrzssmtp05v.rz-as.de [195.189.93.154]) by linode.mirt.net (Postfix) with ESMTP id CCDBD1C146 for [email protected]; Wed, 14 Nov 2007 14:31:53 +0100 (CET) Received: from i1rrzssmtp01v.rz-as.de (i1rrzssmtp01v.rz-as.de [10.190.20.28]) by i1rrzssmtp05v.rz-as.de (Postfix) with ESMTP id 7A923C414F5 for [email protected]; Wed, 14 Nov 2007 14:31:52 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by i1rrzssmtp01v.rz-as.de (Postfix) with ESMTP id 669D94080ED for [email protected]; Wed, 14 Nov 2007 14:31:52 +0100 (CET) Received: from i1rrzssmtp01v.rz-as.de ([10.190.20.28]) by localhost (i1rrzssmtp01v [10.190.20.28]) (amavisd-new, port 10024) with ESMTP id 29035-02 for [email protected]; Wed, 14 Nov 2007 14:31:52 +0100 (CET) Received: from i1rrzsexch01.kvnbw.intra (unknown [10.190.111.39]) by i1rrzssmtp01v.rz-as.de (Postfix) with ESMTP id 42AC54083D7 for [email protected]; Wed, 14 Nov 2007 14:31:52 +0100 (CET) Content-class: urn:content-classes:message MIME-Version: 1.0 X-MimeOLE: Produced By Microsoft Exchange V6.5 Date: Wed, 14 Nov 2007 14:31:51 +0100 Message-ID: 5DC5542DC7AC9B41AFBDD4CB6A39F690018BCA4D@i1rrzsexch01.kvnbw.intra In-Reply-To: 1194877312.6195.13.camel@asus-gonzo X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Re: [stunnel-users] Bugs thread-index: AcglO4gtrDtuzql3QfK+IO77YkmPAQBhe6Cg References: 5DC5542DC7AC9B41AFBDD4CB6A39F690018BCA44@i1rrzsexch01.kvnbw.intra [email protected] 5DC5542DC7AC9B41AFBDD4CB6A39F690018BCA46@i1rrzsexch01.kvnbw.intra 1194877312.6195.13.camel@asus-gonzo From: [email protected] To: [email protected] X-Virus-Scanned: by amavisd-new-20030616-p10 (Debian) at rz-kiru.de X-Virus-Scanned: ClamAV using ClamSMTP Subject: Re: [stunnel-users] Bugs X-BeenThere: [email protected] X-Mailman-Version: 2.1.9 Precedence: list List-Id: "public, moderate-volume list - general discussion, problem reports, patches" <stunnel-users.mirt.net> List-Unsubscribe: http://stunnel.mirt.net/mailman/listinfo/stunnel-users, mailto:[email protected]?subject=unsubscribe List-Archive: http://stunnel.mirt.net/pipermail/stunnel-users List-Post: mailto:[email protected] List-Help: mailto:[email protected]?subject=help List-Subscribe: http://stunnel.mirt.net/mailman/listinfo/stunnel-users, mailto:[email protected]?subject=subscribe Content-Type: multipart/mixed; boundary="===============1565634509==" Mime-version: 1.0 Sender: [email protected] Errors-To: [email protected] X-Virus-Scanned: ClamAV using ClamSMTP
This is a multi-part message in MIME format.
--===============1565634509== Content-class: urn:content-classes:message Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C826C2.B73751C4"
This is a multi-part message in MIME format.
------_=_NextPart_001_01C826C2.B73751C4 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
=20 Hallo, =20 i tried both, another path and forward slashes and it does not work. The = following message still appears: =20 c:\Programme\stunnel\logs\stunnel.log: Broken pipe (32) Unable to open output file: c:\Programme\stunnel\logs\stunnel.log
What happens if you start the Service over "stunnel.exe -start"? Do you = get the same message?
Best Regards
Von: Gonzalo Diethelm [mailto:[email protected]]=20 Gesendet: Montag, 12. November 2007 15:22 An: H=E4ring, Jan (KIRU) Cc: [email protected] Betreff: Re: [stunnel-users] Bugs
A wild guess: is it truncating your "Program Files" path? I don't know = what it is called in German, but "c:\Programme\stunnel" looks too short = to me. Try using quotes, short path names and/or forward slashes instead = of bakslashes.
Best regards.
On Mon, 2007-11-12 at 09:32 +0100, [email protected] wrote:=20
The second Bug appears also with full specified path. There will be a = problem in Version 4.2x > 4.21 to find the log, because this message is = not be logged the log-file, only in the Icon log which is not available = in 4.21. =09 2007.11.12 08:43:20 LOG3[2696:2700]: = c:\Programme\stunnel\logs\stunnel.log: Broken pipe (32) 2007.11.12 08:43:20 LOG3[2696:2700]: Unable to open output file: = c:\Programme\stunnel\logs\stunnel.log =09 Best Regards Jan =09 =09 -----Urspr=FCngliche Nachricht----- Von: [email protected] = [mailto:[email protected]] Im Auftrag von Michal Trojnara Gesendet: Freitag, 9. November 2007 22:25 An: [email protected] Betreff: Re: [stunnel-users] Bugs =09 [email protected] wrote:
- In Version 4.21:
No Taskbar Icon is displayed when the service starts. Although the=20 taskbar ist set in config file (taskbar =3D yes).
=09 It's not a bug. It's a feature. Any object (icon, window, etc.) = displayed by a service may be exploited by a local user to gain = privileges of this user (in this case usually LocalSystem). =09
- In probably all Versions (I have testet 4.18, 4.20 and 4.21) If i=20
started the service over Start -> Programm Files -> stunnel -> =
Service=20
Start (stunnel -start) no log files are written. If i start the=20 service over services.msc from Windows or "sc start stunnel" log =
files are written.
The icon log displayed the following message in version 4.18 and 4.20 2007.11.09 09:41:03 LOG3[2396:2400]: stunnel.log: Broken pipe (32) 2007.11.09 09:41:03 LOG3[2396:2400]: Unable to open output file: stunnel.log
=09 Did you try to specify full file path (e.g. c:\stunnel.log)? =09 Best regards, Mike _______________________________________________ stunnel-users mailing list [email protected] http://stunnel.mirt.net/mailman/listinfo/stunnel-users =09
But I am talking about the "service". The .exe works fine too.
You install the service with stunnel -install on the shell You start the service with stunnel -start on the shell
or
Start --> Programs --> stunnel --> Service Install Start --> Programs --> stunnel --> Service Start
Best Regards Jan
-----Ursprüngliche Nachricht----- Von: J Zhang@ellington & Associates [mailto:[email protected]] Gesendet: Mittwoch, 14. November 2007 15:13 An: Häring, Jan (KIRU); [email protected] Betreff: Re: [stunnel-users] Bugs
I installed in C:\Program Files, and copied the folder stunnel to somewhere else such as c:\non_microsoft; then uninstall the stunnel; running the program (double click the stunnel.exe) from c:\non_microsoft\stunnel;
it works fine
jz
----- Original Message ---------------
Return-Path: [email protected] Received: from linode.mirt.net ([64.22.71.125]) by ellingtongeologic.com for [email protected]; Wed, 14 Nov 2007 05:33:02 -0800 Received: from linode.mirt.net (localhost [127.0.0.1]) by linode.mirt.net (Postfix) with ESMTP id A851C1C24D; Wed, 14 Nov 2007 14:32:03 +0100 (CET) Received: from linode.mirt.net (localhost [127.0.0.1]) by linode.mirt.net (Postfix) with ESMTP id BEA251C238; Wed, 14 Nov 2007 14:31:59 +0100 (CET) X-Original-To: [email protected] Delivered-To: [email protected] Received: from linode.mirt.net (localhost [127.0.0.1]) by linode.mirt.net (Postfix) with ESMTP id 522DC1C233 for [email protected]; Wed, 14 Nov 2007 14:31:56 +0100 (CET) Received: from i1rrzssmtp05v.rz-as.de (i1rrzssmtp05v.rz-as.de [195.189.93.154]) by linode.mirt.net (Postfix) with ESMTP id CCDBD1C146 for [email protected]; Wed, 14 Nov 2007 14:31:53 +0100 (CET) Received: from i1rrzssmtp01v.rz-as.de (i1rrzssmtp01v.rz-as.de [10.190.20.28]) by i1rrzssmtp05v.rz-as.de (Postfix) with ESMTP id 7A923C414F5 for [email protected]; Wed, 14 Nov 2007 14:31:52 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by i1rrzssmtp01v.rz-as.de (Postfix) with ESMTP id 669D94080ED for [email protected]; Wed, 14 Nov 2007 14:31:52 +0100 (CET) Received: from i1rrzssmtp01v.rz-as.de ([10.190.20.28]) by localhost (i1rrzssmtp01v [10.190.20.28]) (amavisd-new, port 10024) with ESMTP id 29035-02 for [email protected]; Wed, 14 Nov 2007 14:31:52 +0100 (CET) Received: from i1rrzsexch01.kvnbw.intra (unknown [10.190.111.39]) by i1rrzssmtp01v.rz-as.de (Postfix) with ESMTP id 42AC54083D7 for [email protected]; Wed, 14 Nov 2007 14:31:52 +0100 (CET) Content-class: urn:content-classes:message MIME-Version: 1.0 X-MimeOLE: Produced By Microsoft Exchange V6.5 Date: Wed, 14 Nov 2007 14:31:51 +0100 Message-ID: 5DC5542DC7AC9B41AFBDD4CB6A39F690018BCA4D@i1rrzsexch01.kvnbw.intra In-Reply-To: 1194877312.6195.13.camel@asus-gonzo X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Re: [stunnel-users] Bugs thread-index: AcglO4gtrDtuzql3QfK+IO77YkmPAQBhe6Cg References: 5DC5542DC7AC9B41AFBDD4CB6A39F690018BCA44@i1rrzsexch01.kvnbw.intra [email protected] 5DC5542DC7AC9B41AFBDD4CB6A39F690018BCA46@i1rrzsexch01.kvnbw.intra 1194877312.6195.13.camel@asus-gonzo From: [email protected] To: [email protected] X-Virus-Scanned: by amavisd-new-20030616-p10 (Debian) at rz-kiru.de X-Virus-Scanned: ClamAV using ClamSMTP Subject: Re: [stunnel-users] Bugs X-BeenThere: [email protected] X-Mailman-Version: 2.1.9 Precedence: list List-Id: "public, moderate-volume list - general discussion, problem reports, patches" <stunnel-users.mirt.net> List-Unsubscribe: http://stunnel.mirt.net/mailman/listinfo/stunnel-users, mailto:[email protected]?subject=unsubscribe List-Archive: http://stunnel.mirt.net/pipermail/stunnel-users List-Post: mailto:[email protected] List-Help: mailto:[email protected]?subject=help List-Subscribe: http://stunnel.mirt.net/mailman/listinfo/stunnel-users, mailto:[email protected]?subject=subscribe Content-Type: multipart/mixed; boundary="===============1565634509==" Mime-version: 1.0 Sender: [email protected] Errors-To: [email protected] X-Virus-Scanned: ClamAV using ClamSMTP
This is a multi-part message in MIME format.
--===============1565634509== Content-class: urn:content-classes:message Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C826C2.B73751C4"
This is a multi-part message in MIME format.
------_=_NextPart_001_01C826C2.B73751C4 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
=20 Hallo, =20 i tried both, another path and forward slashes and it does not work. The = following message still appears: =20 c:\Programme\stunnel\logs\stunnel.log: Broken pipe (32) Unable to open output file: c:\Programme\stunnel\logs\stunnel.log
What happens if you start the Service over "stunnel.exe -start"? Do you = get the same message?
Best Regards
Von: Gonzalo Diethelm [mailto:[email protected]]=20 Gesendet: Montag, 12. November 2007 15:22 An: H=E4ring, Jan (KIRU) Cc: [email protected] Betreff: Re: [stunnel-users] Bugs
A wild guess: is it truncating your "Program Files" path? I don't know = what it is called in German, but "c:\Programme\stunnel" looks too short = to me. Try using quotes, short path names and/or forward slashes instead = of bakslashes.
Best regards.
On Mon, 2007-11-12 at 09:32 +0100, [email protected] wrote:=20
The second Bug appears also with full specified path. There will be a = problem in Version 4.2x > 4.21 to find the log, because this message is = not be logged the log-file, only in the Icon log which is not available = in 4.21. =09 2007.11.12 08:43:20 LOG3[2696:2700]: = c:\Programme\stunnel\logs\stunnel.log: Broken pipe (32) 2007.11.12 08:43:20 LOG3[2696:2700]: Unable to open output file: = c:\Programme\stunnel\logs\stunnel.log =09 Best Regards Jan =09 =09 -----Urspr=FCngliche Nachricht----- Von: [email protected] = [mailto:[email protected]] Im Auftrag von Michal Trojnara Gesendet: Freitag, 9. November 2007 22:25 An: [email protected] Betreff: Re: [stunnel-users] Bugs =09 [email protected] wrote:
- In Version 4.21:
No Taskbar Icon is displayed when the service starts. Although the=20 taskbar ist set in config file (taskbar =3D yes).
=09 It's not a bug. It's a feature. Any object (icon, window, etc.) = displayed by a service may be exploited by a local user to gain = privileges of this user (in this case usually LocalSystem). =09
- In probably all Versions (I have testet 4.18, 4.20 and 4.21) If i=20
started the service over Start -> Programm Files -> stunnel -> =
Service=20
Start (stunnel -start) no log files are written. If i start the=20 service over services.msc from Windows or "sc start stunnel" log =
files are written.
The icon log displayed the following message in version 4.18 and 4.20 2007.11.09 09:41:03 LOG3[2396:2400]: stunnel.log: Broken pipe (32) 2007.11.09 09:41:03 LOG3[2396:2400]: Unable to open output file: stunnel.log
=09 Did you try to specify full file path (e.g. c:\stunnel.log)? =09 Best regards, Mike _______________________________________________ stunnel-users mailing list [email protected] http://stunnel.mirt.net/mailman/listinfo/stunnel-users =09
Jan
I opened a DOS window (run command), changed directory to the folder where stunnel is; typed "stunnel -install", the service is installed; and typed "stunnel -start", then the service is started.
This should be the same thing as clicking
Start --> Programs --> stunnel --> Service Install Start --> Programs --> stunnel --> Service Start
regards
JZ
----- Original Message ---------------
Return-Path: [email protected] Received: from linode.mirt.net ([64.22.71.125]) by ellingtongeologic.com for [email protected]; Wed, 14 Nov 2007 08:10:02 -0800 Received: from linode.mirt.net (localhost [127.0.0.1]) by linode.mirt.net (Postfix) with ESMTP id CD09B1C24B; Wed, 14 Nov 2007 17:09:19 +0100 (CET) Received: from linode.mirt.net (localhost [127.0.0.1]) by linode.mirt.net (Postfix) with ESMTP id E7F831C137; Wed, 14 Nov 2007 17:09:12 +0100 (CET) X-Original-To: [email protected] Delivered-To: [email protected] Received: from linode.mirt.net (localhost [127.0.0.1]) by linode.mirt.net (Postfix) with ESMTP id A05681C165 for [email protected]; Wed, 14 Nov 2007 17:09:09 +0100 (CET) Received: from i1rrzssmtp05v.rz-as.de (i1rrzssmtp05v.rz-as.de [195.189.93.154]) by linode.mirt.net (Postfix) with ESMTP id 360C21C137 for [email protected]; Wed, 14 Nov 2007 17:09:08 +0100 (CET) Received: from i1rrzssmtp01v.rz-as.de (i1rrzssmtp01v.rz-as.de [10.190.20.28]) by i1rrzssmtp05v.rz-as.de (Postfix) with ESMTP id 816C0C234DD for [email protected]; Wed, 14 Nov 2007 17:09:07 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by i1rrzssmtp01v.rz-as.de (Postfix) with ESMTP id 64AC14080ED for [email protected]; Wed, 14 Nov 2007 17:09:07 +0100 (CET) Received: from i1rrzssmtp01v.rz-as.de ([10.190.20.28]) by localhost (i1rrzssmtp01v [10.190.20.28]) (amavisd-new, port 10024) with ESMTP id 04777-15 for [email protected]; Wed, 14 Nov 2007 17:09:07 +0100 (CET) Received: from i1rrzsexch01.kvnbw.intra (unknown [10.190.111.39]) by i1rrzssmtp01v.rz-as.de (Postfix) with ESMTP id 3EC4E408362 for [email protected]; Wed, 14 Nov 2007 17:09:07 +0100 (CET) Content-class: urn:content-classes:message MIME-Version: 1.0 X-MimeOLE: Produced By Microsoft Exchange V6.5 Date: Wed, 14 Nov 2007 17:09:06 +0100 Message-ID: 5DC5542DC7AC9B41AFBDD4CB6A39F690018BCA4E@i1rrzsexch01.kvnbw.intra In-Reply-To: PC1760200711140812570077763648a6@your-4dacd0ea75 X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Re: [stunnel-users] Bugs thread-index: AcgmygXgdzA5bU0QTPSmRx+OLh2DDgADgLMg References: 5DC5542DC7AC9B41AFBDD4CB6A39F690018BCA4D@i1rrzsexch01.kvnbw.intra PC1760200711140812570077763648a6@your-4dacd0ea75 From: [email protected] To: [email protected] X-Virus-Scanned: by amavisd-new-20030616-p10 (Debian) at rz-kiru.de X-Virus-Scanned: ClamAV using ClamSMTP Subject: Re: [stunnel-users] Bugs X-BeenThere: [email protected] X-Mailman-Version: 2.1.9 Precedence: list List-Id: "public, moderate-volume list - general discussion, problem reports, patches" <stunnel-users.mirt.net> List-Unsubscribe: http://stunnel.mirt.net/mailman/listinfo/stunnel-users, mailto:[email protected]?subject=unsubscribe List-Archive: http://stunnel.mirt.net/pipermail/stunnel-users List-Post: mailto:[email protected] List-Help: mailto:[email protected]?subject=help List-Subscribe: http://stunnel.mirt.net/mailman/listinfo/stunnel-users, mailto:[email protected]?subject=subscribe Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: [email protected] Errors-To: [email protected] X-Virus-Scanned: ClamAV using ClamSMTP
But I am talking about the "service". The .exe works fine too.
You install the service with stunnel -install on the shell You start the service with stunnel -start on the shell
or
Start --> Programs --> stunnel --> Service Install Start --> Programs --> stunnel --> Service Start
Best Regards Jan
-----Ursprüngliche Nachricht----- Von: J Zhang@ellington & Associates [mailto:[email protected]] Gesendet: Mittwoch, 14. November 2007 15:13 An: Häring, Jan (KIRU); [email protected] Betreff: Re: [stunnel-users] Bugs
I installed in C:\Program Files, and copied the folder stunnel to somewhere else such as c:\non_microsoft; then uninstall the stunnel; running the program (double click the stunnel.exe) from c:\non_microsoft\stunnel;
it works fine
jz
----- Original Message ---------------
Return-Path: [email protected] Received: from linode.mirt.net ([64.22.71.125]) by ellingtongeologic.com for [email protected]; Wed, 14 Nov 2007 05:33:02 -0800 Received: from linode.mirt.net (localhost [127.0.0.1]) by linode.mirt.net (Postfix) with ESMTP id A851C1C24D; Wed, 14 Nov 2007 14:32:03 +0100 (CET) Received: from linode.mirt.net (localhost [127.0.0.1]) by linode.mirt.net (Postfix) with ESMTP id BEA251C238; Wed, 14 Nov 2007 14:31:59 +0100 (CET) X-Original-To: [email protected] Delivered-To: [email protected] Received: from linode.mirt.net (localhost [127.0.0.1]) by linode.mirt.net (Postfix) with ESMTP id 522DC1C233 for [email protected]; Wed, 14 Nov 2007 14:31:56 +0100 (CET) Received: from i1rrzssmtp05v.rz-as.de (i1rrzssmtp05v.rz-as.de [195.189.93.154]) by linode.mirt.net (Postfix) with ESMTP id CCDBD1C146 for [email protected]; Wed, 14 Nov 2007 14:31:53 +0100 (CET) Received: from i1rrzssmtp01v.rz-as.de (i1rrzssmtp01v.rz-as.de [10.190.20.28]) by i1rrzssmtp05v.rz-as.de (Postfix) with ESMTP id 7A923C414F5 for [email protected]; Wed, 14 Nov 2007 14:31:52 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by i1rrzssmtp01v.rz-as.de (Postfix) with ESMTP id 669D94080ED for [email protected]; Wed, 14 Nov 2007 14:31:52 +0100 (CET) Received: from i1rrzssmtp01v.rz-as.de ([10.190.20.28]) by localhost (i1rrzssmtp01v [10.190.20.28]) (amavisd-new, port 10024) with ESMTP id 29035-02 for [email protected]; Wed, 14 Nov 2007 14:31:52 +0100 (CET) Received: from i1rrzsexch01.kvnbw.intra (unknown [10.190.111.39]) by i1rrzssmtp01v.rz-as.de (Postfix) with ESMTP id 42AC54083D7 for [email protected]; Wed, 14 Nov 2007 14:31:52 +0100 (CET) Content-class: urn:content-classes:message MIME-Version: 1.0 X-MimeOLE: Produced By Microsoft Exchange V6.5 Date: Wed, 14 Nov 2007 14:31:51 +0100 Message-ID: 5DC5542DC7AC9B41AFBDD4CB6A39F690018BCA4D@i1rrzsexch01.kvnbw.intra In-Reply-To: 1194877312.6195.13.camel@asus-gonzo X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Re: [stunnel-users] Bugs thread-index: AcglO4gtrDtuzql3QfK+IO77YkmPAQBhe6Cg References: 5DC5542DC7AC9B41AFBDD4CB6A39F690018BCA44@i1rrzsexch01.kvnbw.intra [email protected] 5DC5542DC7AC9B41AFBDD4CB6A39F690018BCA46@i1rrzsexch01.kvnbw.intra 1194877312.6195.13.camel@asus-gonzo From: [email protected] To: [email protected] X-Virus-Scanned: by amavisd-new-20030616-p10 (Debian) at rz-kiru.de X-Virus-Scanned: ClamAV using ClamSMTP Subject: Re: [stunnel-users] Bugs X-BeenThere: [email protected] X-Mailman-Version: 2.1.9 Precedence: list List-Id: "public, moderate-volume list - general discussion, problem reports, patches" <stunnel-users.mirt.net> List-Unsubscribe: http://stunnel.mirt.net/mailman/listinfo/stunnel-users, mailto:[email protected]?subject=unsubscribe List-Archive: http://stunnel.mirt.net/pipermail/stunnel-users List-Post: mailto:[email protected] List-Help: mailto:[email protected]?subject=help List-Subscribe: http://stunnel.mirt.net/mailman/listinfo/stunnel-users, mailto:[email protected]?subject=subscribe Content-Type: multipart/mixed; boundary="===============1565634509==" Mime-version: 1.0 Sender: [email protected] Errors-To: [email protected] X-Virus-Scanned: ClamAV using ClamSMTP
This is a multi-part message in MIME format.
--===============1565634509== Content-class: urn:content-classes:message Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C826C2.B73751C4"
This is a multi-part message in MIME format.
------_=_NextPart_001_01C826C2.B73751C4 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
=20 Hallo, =20 i tried both, another path and forward slashes and it does not work. The = following message still appears: =20 c:\Programme\stunnel\logs\stunnel.log: Broken pipe (32) Unable to open output file: c:\Programme\stunnel\logs\stunnel.log
What happens if you start the Service over "stunnel.exe -start"? Do you = get the same message?
Best Regards
Von: Gonzalo Diethelm [mailto:[email protected]]=20 Gesendet: Montag, 12. November 2007 15:22 An: H=E4ring, Jan (KIRU) Cc: [email protected] Betreff: Re: [stunnel-users] Bugs
A wild guess: is it truncating your "Program Files" path? I don't know = what it is called in German, but "c:\Programme\stunnel" looks too short = to me. Try using quotes, short path names and/or forward slashes instead = of bakslashes.
Best regards.
On Mon, 2007-11-12 at 09:32 +0100, [email protected] wrote:=20
The second Bug appears also with full specified path. There will be a = problem in Version 4.2x > 4.21 to find the log, because this message is = not be logged the log-file, only in the Icon log which is not available = in 4.21. =09 2007.11.12 08:43:20 LOG3[2696:2700]: = c:\Programme\stunnel\logs\stunnel.log: Broken pipe (32) 2007.11.12 08:43:20 LOG3[2696:2700]: Unable to open output file: = c:\Programme\stunnel\logs\stunnel.log =09 Best Regards Jan =09 =09 -----Urspr=FCngliche Nachricht----- Von: [email protected] = [mailto:[email protected]] Im Auftrag von Michal Trojnara Gesendet: Freitag, 9. November 2007 22:25 An: [email protected] Betreff: Re: [stunnel-users] Bugs =09 [email protected] wrote:
- In Version 4.21:
No Taskbar Icon is displayed when the service starts. Although the=20 taskbar ist set in config file (taskbar =3D yes).
=09 It's not a bug. It's a feature. Any object (icon, window, etc.) = displayed by a service may be exploited by a local user to gain = privileges of this user (in this case usually LocalSystem). =09
- In probably all Versions (I have testet 4.18, 4.20 and 4.21) If i=20
started the service over Start -> Programm Files -> stunnel -> =
Service=20
Start (stunnel -start) no log files are written. If i start the=20 service over services.msc from Windows or "sc start stunnel" log =
files are written.
The icon log displayed the following message in version 4.18 and 4.20 2007.11.09 09:41:03 LOG3[2396:2400]: stunnel.log: Broken pipe (32) 2007.11.09 09:41:03 LOG3[2396:2400]: Unable to open output file: stunnel.log
=09 Did you try to specify full file path (e.g. c:\stunnel.log)? =09 Best regards, Mike _______________________________________________ stunnel-users mailing list [email protected] http://stunnel.mirt.net/mailman/listinfo/stunnel-users =09
stunnel-users mailing list [email protected] http://stunnel.mirt.net/mailman/listinfo/stunnel-users
Hallo,
I am generating stunnel-certificates with openssl by using the stunnel.cnf. Is the stunnel.cnf necessary for generating certificates or can i use the normal openssl.cnf?
Are there any compatibility problems?
Best Regards Jan
Hello,
The creation of certificates depends on openssl. You should use the OpenSSL configuration file.
Here is some info. on OpenSSL http://old.pseudonym.org/ssl/ssl_cook.html
--- [email protected] wrote:
Hallo,
I am generating stunnel-certificates with openssl by using the stunnel.cnf. Is the stunnel.cnf necessary for generating certificates or can i use the normal openssl.cnf?
Are there any compatibility problems?
Best Regards Jan _______________________________________________ stunnel-users mailing list [email protected]
http://stunnel.mirt.net/mailman/listinfo/stunnel-users
____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
-
"J Zhang"＠ellington -
Algol Tradent -
Gonzalo Diethelm -
Jan.Haering＠rz-kiru.de -
Michal Trojnara