I am trying to get stunnel up and running and getting the error in the subject. The full error text is:
"SSL_accept: ssl/record/ssl3_record.c:354: error:0A00010B:SSL routines::wrong version number"
I have a simple service which seems to load fine. I have stunnel up at the "server side" on a VM in azure and if I telnet to the VM public address I can see the activity in the stunnel logs on the VM, so I know at least a pipe is open.
I can hit the port server side and see the log activity in stunnel also.
If I try a telnet to the local stunnel accept port. I see the error above.
This is the full log.
2023.08.23 11:01:04 LOG7[service]: Found 1 ready file descriptor(s) 2023.08.23 11:01:04 LOG7[service]: FD=604 ifds=r-x ofds=--- 2023.08.23 11:01:04 LOG7[service]: FD=664 ifds=r-x ofds=r-- 2023.08.23 11:01:04 LOG7[service]: Service [dev-dev-testHarness] accepted (FD=708) from 127.0.0.1:10756 2023.08.23 11:01:04 LOG7[service]: Creating a new thread 2023.08.23 11:01:04 LOG7[service]: New thread created 2023.08.23 11:01:04 LOG7[4]: Service [dev-dev-testHarness] started 2023.08.23 11:01:04 LOG7[4]: Setting local socket options (FD=708) 2023.08.23 11:01:04 LOG7[4]: Option TCP_NODELAY set on local socket 2023.08.23 11:01:04 LOG5[4]: Service [dev-dev-testHarness] accepted connection from 127.0.0.1:10756 2023.08.23 11:01:04 LOG6[4]: Peer certificate not required 2023.08.23 11:01:04 LOG7[4]: TLS state (accept): before SSL initialization 2023.08.23 11:01:04 LOG7[4]: TLS alert (write): fatal: decode error 2023.08.23 11:01:04 LOG3[4]: SSL_accept: ssl/record/rec_layer_s3.c:303: error:0A000126:SSL routines::unexpected eof while reading 2023.08.23 11:01:04 LOG5[4]: Connection reset/closed: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2023.08.23 11:01:04 LOG7[4]: Local descriptor (FD=708) closed 2023.08.23 11:01:04 LOG7[4]: Service [dev-dev-testHarness] finished (0 left)
What am I missing, I haven't used stunnel for quite a while and previous effort were on linux and I did not see this problem then.
Using telnet/TNC as the local test tools and stunnel was installed with bare default installation. The only thing I have done different is to set a config fragment folder to separate services on the sever side and they report as loading fine.
any help greatly appreciated.
Stu