- stunnel-users - stunnel.org

stunnel ignoring config file for port binding
by Tim Turner 18 Apr '20

18 Apr '20

Config and logs below but redacted, this is running on 2016 server, if it matters I am starting it over an RDP session I find that the port is ignored in the config file and it always binds to ports in the 23*** range ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Certificate/key is needed in server mode and optional in client mode ; The default certificate is provided only for testing and should not ; be used in a production environment ;cert = stunnel.pem ;key = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ;CApath = certs ; It's often easier to use CAfile ;CAfile = certs.pem ; Don't forget to c_rehash CRLpath ;CRLpath = crls ; Alternatively you can use CRLfile ;CRLfile = crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 output = /stunnel.log ; Use it for client mode client = yes ; Service-level configuration [Service Config] accept=127.0.0.1:40001 connect = redacted:443 log file 2020.04.18 10:08:18 LOG7[main]: Dispatching a signal from the signal pipe 2020.04.18 10:08:18 LOG7[main]: Processing SIGNAL_RELOAD_CONFIG 2020.04.18 10:08:18 LOG7[main]: Running on Windows 6.2 2020.04.18 10:08:18 LOG5[main]: Reading configuration from file stunnel.conf 2020.04.18 10:08:18 LOG5[main]: UTF-8 byte order mark detected 2020.04.18 10:08:18 LOG7[main]: Compression disabled 2020.04.18 10:08:18 LOG7[main]: No PRNG seeding was required 2020.04.18 10:08:18 LOG6[main]: Initializing service [Service Config] 2020.04.18 10:08:18 LOG7[main]: Ciphers: HIGH:!aNULL:!SSLv2:!DH:!kDHEPSK 2020.04.18 10:08:18 LOG7[main]: TLSv1.3 ciphersuites: TLS_CHACHA20_POLY1305_SHA256:TLS_AES_256_GCM_SHA384:TLS_AES_128_GCM_SHA256 2020.04.18 10:08:18 LOG7[main]: TLS options: 0x02100004 (+0x00000000, -0x00000000) 2020.04.18 10:08:18 LOG7[main]: No certificate or private key specified 2020.04.18 10:08:18 LOG4[main]: Service [Digital-Prod-MTF-FIX-MD] needs authentication to prevent MITM attacks 2020.04.18 10:08:18 LOG5[main]: Configuration successful 2020.04.18 10:08:18 LOG7[main]: Deallocating section defaults 2020.04.18 10:08:18 LOG5[main]: Logging to C:\Users\turnert\AppData\Local\/stunnel.log 2020.04.18 10:08:18 LOG7[main]: Binding service [New Broker FIX Demo-Trading] 2020.04.18 10:08:18 LOG7[main]: Listening file descriptor created (FD=1296) 2020.04.18 10:08:18 LOG7[main]: Setting accept socket options (FD=1296) 2020.04.18 10:08:18 LOG7[main]: Option SO_EXCLUSIVEADDRUSE set on accept socket 2020.04.18 10:08:18 LOG6[main]: Service [New Broker FIX Demo-Trading] (FD=1296) bound to 127.0.0.1:23471 2020.04.18 10:08:18 LOG7[main]: Binding service [Service Config] This message and its attachments are confidential, may not be disclosed or used by any person other than the addressee and are intended only for the named recipient(s). If you are not the intended recipient, please notify the sender immediately and delete any copies of this message. LMAX Group is the holding company of LMAX Exchange, LMAX Global and LMAX Digital. Our registered address is Yellow Building, 1A Nicholas Road, London W11 4AN.

1 0

Re: [stunnel-users] stunnel-users Digest, Vol 189, Issue 3
by Brent Kimberley 10 Apr '20

10 Apr '20

Hi Andre. Can you please post your template? Salut, Brent Friday, April 10, 2020, 6:00:08 a.m. EDT, stunnel-users-request(a)stunnel.org <stunnel-users-request(a)stunnel.org> wrote: Send stunnel-users mailing list submissions to stunnel-users(a)stunnel.org To subscribe or unsubscribe via the World Wide Web, visit https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users or, via email, send a message with subject or body 'help' to stunnel-users-request(a)stunnel.org You can reach the person managing the list at stunnel-users-owner(a)stunnel.org When replying, please edit your Subject line so it is more specific than "Re: Contents of stunnel-users digest..." Today's Topics: 1. CERT: Pre-verification error: unsupported certificate purpose (Andr? L?onard) ---------------------------------------------------------------------- Message: 1 Date: Fri, 10 Apr 2020 09:46:29 +0200 From: Andr? L?onard <andre.leonard(a)celotoise.com> To: stunnel-users(a)stunnel.org Subject: [stunnel-users] CERT: Pre-verification error: unsupported certificate purpose Message-ID: <1a2bba7f82b899d6e208303bc3a8ad6d(a)celotoise.com> Content-Type: text/plain; charset="utf-8"; Format="flowed" Hi, I upgraded stunnel from version 5.44 to 5.56. But now I'm getting the following error : CERT: Pre-verification error: unsupported certificate purpose Rejected by CERT Setting verifiy to 0 slove temporary the issue but is not secure at all. As testing pupose, I recreated new certificate with the following command but ending with the same issue: openssl req -new -x509 -days 365 -nodes -config stunnel.cnf -out stunnel.pem -keyout stunnel.pem How to fix this ? Thanks for you help, Andr?.

1 0

CERT: Pre-verification error: unsupported certificate purpose
by André Léonard 10 Apr '20

10 Apr '20

Hi, I upgraded stunnel from version 5.44 to 5.56. But now I'm getting the following error : CERT: Pre-verification error: unsupported certificate purpose Rejected by CERT Setting verifiy to 0 slove temporary the issue but is not secure at all. As testing pupose, I recreated new certificate with the following command but ending with the same issue: openssl req -new -x509 -days 365 -nodes -config stunnel.cnf -out stunnel.pem -keyout stunnel.pem How to fix this ? Thanks for you help, André.

1 0

Stunnel to accept SSL and connect SSL
by Ray 08 Apr '20

08 Apr '20

Hi everyone, Simple question - How can I configure Stunnel to accept SSL from downlinks and connect to an SSL uplink? Thanks Ray

1 0

Stunnel API hooks
by Ray 31 Mar '20

31 Mar '20

Hi everyone, I want to do some processing over the incoming connection before forwarding the payload to the uplinks. ie. Listen <-> customized processing <-> connect Is there any API/hook structure to write my logic in a clean fashion? Or need to add/integrate my codes to the Stunnel codes? P.S I want this processing to be done in Stunnel and not by adding a 2nd application to achieve the job. Thanks Ray

1 0

Stunnel binary for macOS?
by Shrinidhi Rao 22 Mar '20

22 Mar '20

Greetings! I tried building stunnel in my mac and it was successful since I have all the developer tools installed. What about for those who do not have an 8GB size tool? Is there a way I can simply build a binary that can work in a wide range of macOS versions (including older ones)? Is there someone who has already done this? Any pointers in this regard would be greatly appreciated! -- Shrinidhi S Rao

2 1

stunnel squid proxy without client side stunnel
by claudiu vasadi 13 Mar '20

13 Mar '20

Hello list, I've successfully managed to setup the following: client -> stunnel (local on client) -> stunnel (on server) -> squid (same server) I was wondering however if it would be possible to NOT use stunnel on the client side and connect directly to the server side one. My current, working configs are below. simplified server side stunnel.conf: cert = /etc/stunnel/stunnel.pem debug = 7 output = /var/log/stunnel.log client = no [squid] accept = 3128 connect = 127.0.0.1:3129 client side config: cert = /etc/stunnel/stunnel.pem client = yes [squid] accept = 127.0.0.1:8080 connect = server:3128 On the server side, I've tried specifying: client = yes protocol = connect protocolHost = 127.0.0.1:3129 #SSL terminates on the stunnel server (still unsure about this) but because the proxy needs authentication (it used LDAP), I'm hitting what seems to be stunnel not returning the HTTP407 back to the client. 2020.03.13 20:18:34 LOG6[12306:140677061584640]: Client-mode connect protocol negotiations started 2020.03.13 20:18:34 LOG7[12306:140677061584640]: -> CONNECT 127.0.0.1:3129 HTTP/1.1 2020.03.13 20:18:34 LOG7[12306:140677061584640]: -> Host: 127.0.0.1:3129 2020.03.13 20:18:34 LOG7[12306:140677061584640]: -> 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- HTTP/1.1 407 Proxy Authentication Required 2020.03.13 20:18:34 LOG3[12306:140677061584640]: CONNECT request rejected 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- Server: squid/3.5.20 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- Mime-Version: 1.0 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- Date: Fri, 13 Mar 2020 20:18:34 GMT 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- Content-Type: text/html;charset=utf-8 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- Content-Length: 3431 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- X-Squid-Error: ERR_CACHE_ACCESS_DENIED 0 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- Vary: Accept-Language 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- Content-Language: en 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- Proxy-Authenticate: Basic realm="myproxy" 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- X-Cache: MISS from myproxy 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- X-Cache-Lookup: NONE from myproxy:3129 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- Via: 1.1 myproxy (squid/3.5.20) 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- Connection: keep-alive 2020.03.13 20:18:34 LOG7[12306:140677061584640]: <- 2020.03.13 20:18:34 LOG5[12306:140677061584640]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket I'm testing with the following command from the client side: curl -U mysuer -x http://myproxy:3128 https://www.google.com Any help would be greatly appreciated.

1 0

S-tunnel will not send TLS
by Jan Falk 13 Mar '20

13 Mar '20

Hi. Can someone tell me why Stunnel stops at wating 10s? Log: 2020.03.12 09:43:36 LOG6[main]: Initializing service [x3_x4_DICOM_BFT_client] 2020.03.12 09:43:36 LOG7[main]: Ciphers: HIGH:!aNULL:!SSLv2:!DH:!kDHEPSK 2020.03.12 09:43:36 LOG7[main]: TLSv1.3 ciphersuites: TLS_CHACHA20_POLY1305_SHA256:TLS_AES_256_GCM_SHA384:TLS_AES_128_GCM_SHA256 2020.03.12 09:43:36 LOG7[main]: TLS options: 0x02100004 (+0x00000000, -0x00000000) 2020.03.12 09:43:36 LOG6[main]: Loading certificate from file: x1.dc.x2.se_201900604.pem 2020.03.12 09:43:36 LOG6[main]: Certificate loaded from file: x1.dc.x2.se_201900604.pem 2020.03.12 09:43:36 LOG6[main]: Loading private key from file: x1.dc.x2.se_201900604.pem 2020.03.12 09:43:36 LOG6[main]: Private key loaded from file: x1.dc.x2.se_201900604.pem 2020.03.12 09:43:36 LOG7[main]: Private key check succeeded 2020.03.12 09:43:36 LOG4[main]: Service [x3_x4_DICOM_BFT_client] uses "verifyChain" without subject checks 2020.03.12 09:43:36 LOG4[main]: Use "checkHost" or "checkIP" to restrict trusted certificates 2020.03.12 09:43:36 LOG5[main]: Configuration successful 2020.03.12 09:43:36 LOG7[main]: Binding service [x3_x4_HL7_BFT_client] 2020.03.12 09:43:36 LOG7[main]: Listening file descriptor created (FD=380) 2020.03.12 09:43:36 LOG7[main]: Setting accept socket options (FD=380) 2020.03.12 09:43:36 LOG7[main]: Option SO_EXCLUSIVEADDRUSE set on accept socket 2020.03.12 09:43:36 LOG6[main]: Service [x3_x4_HL7_BFT_client] (FD=380) bound to 127.0.0.1:46161 2020.03.12 09:43:36 LOG7[main]: Binding service [x3_x4_DICOM_BFT_client] 2020.03.12 09:43:36 LOG7[main]: Listening file descriptor created (FD=492) 2020.03.12 09:43:36 LOG7[main]: Setting accept socket options (FD=492) 2020.03.12 09:43:36 LOG7[main]: Option SO_EXCLUSIVEADDRUSE set on accept socket 2020.03.12 09:43:36 LOG6[main]: Service [x3_x4_DICOM_BFT_client] (FD=492) bound to 127.0.0.1:46162 2020.03.12 09:43:36 LOG7[cron]: Cron thread initialized 2020.03.12 09:43:36 LOG6[cron]: Executing cron jobs 2020.03.12 09:43:36 LOG6[cron]: Cron jobs completed in 0 seconds 2020.03.12 09:43:36 LOG7[cron]: Waiting 86400 seconds 2020.03.12 09:44:37 LOG7[main]: Found 1 ready file descriptor(s) 2020.03.12 09:44:37 LOG7[main]: FD=380 ifds=r-x ofds=r-- 2020.03.12 09:44:37 LOG7[main]: FD=388 ifds=r-x ofds=--- 2020.03.12 09:44:37 LOG7[main]: Service [SOS_SYNGO_HL7_BFT_client] accepted (FD=508) from 127.0.0.1:50299 2020.03.12 09:44:37 LOG7[main]: Creating a new thread 2020.03.12 09:44:37 LOG7[main]: New thread created 2020.03.12 09:44:37 LOG7[0]: Service [x3_x4_HL7_BFT_client] started 2020.03.12 09:44:37 LOG7[0]: Setting local socket options (FD=508) 2020.03.12 09:44:37 LOG7[0]: Option TCP_NODELAY set on local socket 2020.03.12 09:44:37 LOG5[0]: Service [x3_x4_HL7_BFT_client] accepted connection from 127.0.0.1:50299 2020.03.12 09:44:37 LOG6[0]: s_connect: connecting 10.67.6.106:6161 2020.03.12 09:44:37 LOG7[0]: s_connect: s_poll_wait 10.67.6.106:6161: waiting 10 seconds Thanks in advance //Janne

2 5

Re: [stunnel-users] stunnel-users Digest, Vol 188, Issue 4
by Brent Kimberley 11 Mar '20

11 Mar '20

Hi Kelly. >>Connect = 127.0.0.1:1194? ?#<- this line won't work; but if I replace with 1.2.3.4:1194 then it will work! Generic: The following layers maybe helpful: Cost / People / Process / Infrastructure / Application / Data / Interface ... Specific: Data layer (metadata &/| configuration): Can you please verify that 127.0.01:1194 is present? e.g. netstat -ano | egrep -e Proto -e Active -e 1194 Message: 1 Date: Tue, 10 Mar 2020 13:25:33 +0800 From: Kelly Trinh <kelly(a)trinhonline.com> To: "stunnel-users" <stunnel-users(a)stunnel.org> Subject: [stunnel-users] behaviour when using 127.0.0.1 in the 'connect' field Message-ID: <170c2e7c29d.e9c53ed9127299.5279211261811289922(a)trinhonline.com> Content-Type: text/plain; charset="utf-8" Hi all - just want to report a problem I solved recently but wanted to get some insights on what was causing the problem. About me - learnt some unix at university (20 years ago) but nothing too serious.? Recently (1 month ago) acquired own domain name and now poking around the cloud computing / VPS thing. Project - hand-rolling my own VPN setup on a Ubuntu 18.04 VPS.? OpenVPN is easy since it is a git-clone thing and then just follow the openvpn-install script.? I wanted to add on the Stunnel wrapper because intended to use the VPN in China and apparently their firewall does deep packet inspection and can recognize (and block) openvpn traffic. Problem - when I set up my stunnel using 127.0.0.1 as the connect destination; it doesn't seem to work (I can see from openvpn window that things seem to pipe through stunnel but then immediately the connection is terminated).? If I replace the 127.0.0.1 with IP of the box I am using (say for example 1.2.3.4); everything works!? The FQDN is ok as well; as long as I don't use 127.0.0.1 Specifically the stunnel.conf: [OpenVPN] Accept = 443? # clients connect through 443 to further avoid potential blocking Connect = 127.0.0.1:1194? ?#<- this line won't work; but if I replace with 1.2.3.4:1194 then it will work! Question - My problem is fixed but I am curious if there is any insights on why this is happening given that 1.2.3.4 and 127.0.0.1 are the same machine?

1 0

behaviour when using 127.0.0.1 in the 'connect' field
by Kelly Trinh 10 Mar '20

10 Mar '20

Hi all - just want to report a problem I solved recently but wanted to get some insights on what was causing the problem. About me - learnt some unix at university (20 years ago) but nothing too serious. Recently (1 month ago) acquired own domain name and now poking around the cloud computing / VPS thing. Project - hand-rolling my own VPN setup on a Ubuntu 18.04 VPS. OpenVPN is easy since it is a git-clone thing and then just follow the openvpn-install script. I wanted to add on the Stunnel wrapper because intended to use the VPN in China and apparently their firewall does deep packet inspection and can recognize (and block) openvpn traffic. Problem - when I set up my stunnel using 127.0.0.1 as the connect destination; it doesn't seem to work (I can see from openvpn window that things seem to pipe through stunnel but then immediately the connection is terminated). If I replace the 127.0.0.1 with IP of the box I am using (say for example 1.2.3.4); everything works! The FQDN is ok as well; as long as I don't use 127.0.0.1 Specifically the stunnel.conf: [OpenVPN] Accept = 443 # clients connect through 443 to further avoid potential blocking Connect = 127.0.0.1:1194 #<- this line won't work; but if I replace with 1.2.3.4:1194 then it will work! Question - My problem is fixed but I am curious if there is any insights on why this is happening given that 1.2.3.4 and 127.0.0.1 are the same machine?

3 3

Re: [stunnel-users] (no subject)
by flash＠vicsmba.com 06 Mar '20

06 Mar '20

This can be O/S dependent – some O/S have limits on file descriptors, pipes, etc. I would check that. Second, broken pipes happen when one side closes when there is still action. In Unix C it is easy to do – if you use a piped open but you only want to get the first line of data so your read from the pipe and close … you get a broken pipe every time. This is harmless if that is what you want. Death if not. You might check your Oracle code for premature closing as I doubt it is stunnel. Can you trap the error and resume and see if it works? It well could. Essentially what I am saying is this is not directly a stunnel problem, more likely it is an implementation error. Which could be in the Oracle code as I have had problems with it in the past. More information on the O/S and the Oracle code would help. Eric VICS, LLC Eric S Eberhard 2933 W Middle Verde Rd Camp Verde, AZ 86322 928-567-3727 (land line) 928-301-7537 (cell phone) <http://www.vicsmba.com/> http://www.vicsmba.com <https://www.facebook.com/groups/286143052248115> https://www.facebook.com/groups/286143052248115 From: stunnel-users <stunnel-users-bounces(a)stunnel.org> On Behalf Of Jose Alf. Sent: Wednesday, March 4, 2020 11:09 AM To: stunnel-users(a)stunnel.org; simona vittori <svittori(a)gmail.com> Subject: Re: [stunnel-users] (no subject) Simona, You are not giving enough information for anyone in this list to help you. Please review and apply How To Ask Questions The Smart Way <http://catb.org/~esr/faqs/smart-questions.html> How To Ask Questions The Smart Way and/or How to Report Bugs Effectively <https://www.chiark.greenend.org.uk/~sgtatham/bugs.html> How to Report Bugs Effectively Regards, Jose On Wednesday, March 4, 2020, 4:22:26 AM GMT-5, simona vittori <svittori(a)gmail.com <mailto:[email protected]> > wrote: Hello, I have an encrypted connection through stunnel between client and db server, but in connection I have the following errors: "IO Error: Broken pipe (Write failed) at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:874)" Could you help me, please? Thank you in advance Simona _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org <mailto:[email protected]> https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

1 0

Re: [stunnel-users] stunnel-users Digest, Vol 188, Issue 1
by Brent Kimberley 05 Mar '20

05 Mar '20

You might need to review the documentation for your thin driver. https://www.oracle.com/database/technologies/appdev/jdbc-ucp-19c-downloads.… On Wednesday, March 4, 2020, 6:00:07 a.m. EST, stunnel-users-request(a)stunnel.org <stunnel-users-request(a)stunnel.org> wrote: Send stunnel-users mailing list submissions to stunnel-users(a)stunnel.org To subscribe or unsubscribe via the World Wide Web, visit https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users or, via email, send a message with subject or body 'help' to stunnel-users-request(a)stunnel.org You can reach the person managing the list at stunnel-users-owner(a)stunnel.org When replying, please edit your Subject line so it is more specific than "Re: Contents of stunnel-users digest..." Today's Topics: 1. (no subject) (simona vittori) ---------------------------------------------------------------------- Message: 1 Date: Wed, 4 Mar 2020 10:21:56 +0100 From: simona vittori <svittori(a)gmail.com> To: stunnel-users(a)stunnel.org Subject: [stunnel-users] (no subject) Message-ID: <CAMt_Qybr5aASRw-NokkhiQhe0dALW8kPEV+zCjU_dB7tz=FcYA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hello, I have an encrypted connection through stunnel between client and db server, but in connection I have the following errors: "IO Error: Broken pipe (Write failed) at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:874)" Could you help me, please? Thank you in advance Simona

1 0

(no subject)
by simona vittori 04 Mar '20

04 Mar '20

Hello, I have an encrypted connection through stunnel between client and db server, but in connection I have the following errors: "IO Error: Broken pipe (Write failed) at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:874)" Could you help me, please? Thank you in advance Simona

3 2

Windows Server 2003 issues with stunnel, TLS 1.2 on website(s)
by Sean Kelley 27 Feb '20

27 Feb '20

*Issue:* Old Windows Server cannot be upgraded, but needs TLS 1.2 encryption. Stunnel looks like a solution, but I'm having issues configuring it to work (It is "running" successfully with a pem file and port 442). In IIS Manager btw, the website SSL Port is set to 443. I've tried searching (i.e. google "site: https://www.stunnel.org/pipermail/stunnel-users/ server 2003") and have found a few leads, but nothing that addresses my issues in a way I understand. My ignorance I'm sure. *Server details:* * Windows Server 2003, Standard Edition, Service Pack 2 * IIS web server running 3 websites (ASP, PHP mix) * Valid Certificates from Lets Encrypt in Certificate Store * stunnel 5.49 (latest version I could find that works on 32bit OS's) sorry it's not the latest :( *Working Log with Port 442:* 2020.02.24 15:24:37 LOG7[main]: Running on Windows 5.2 2020.02.24 15:24:37 LOG7[main]: No limit detected for the number of clients 2020.02.24 15:24:37 LOG5[main]: stunnel 5.49 on x86-pc-msvc-1500 platform 2020.02.24 15:24:37 LOG5[main]: Compiled/running with OpenSSL 1.0.2p-fips 14 Aug 2018 2020.02.24 15:24:37 LOG5[main]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2020.02.24 15:24:37 LOG7[main]: errno: (*_errno()) 2020.02.24 15:24:37 LOG7[ui]: GUI message loop initialized 2020.02.24 15:24:37 LOG7[main]: Running on Windows 5.2 2020.02.24 15:24:37 LOG5[main]: Reading configuration from file stunnel.conf 2020.02.24 15:24:37 LOG5[main]: UTF-8 byte order mark detected 2020.02.24 15:24:37 LOG5[main]: FIPS mode disabled 2020.02.24 15:24:37 LOG7[main]: Compression disabled 2020.02.24 15:24:37 LOG7[main]: No PRNG seeding was required 2020.02.24 15:24:37 LOG6[main]: Initializing service [https] 2020.02.24 15:24:37 LOG7[main]: Ciphers: HIGH:!aNULL:!SSLv2:!DH:!kDHEPSK 2020.02.24 15:24:37 LOG7[main]: TLS options: 0x03004004 (+0x00004000, -0x00000000) 2020.02.24 15:24:37 LOG6[main]: Loading certificate from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG6[main]: Certificate loaded from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG6[main]: Loading private key from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG6[main]: Private key loaded from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG7[main]: Private key check succeeded 2020.02.24 15:24:37 LOG7[main]: ECDH initialization 2020.02.24 15:24:37 LOG7[main]: ECDH initialized with curve prime256v1 2020.02.24 15:24:37 LOG6[main]: Initializing service [domain] 2020.02.24 15:24:37 LOG7[main]: Ciphers: HIGH:!aNULL:!SSLv2:!DH:!kDHEPSK 2020.02.24 15:24:37 LOG7[main]: TLS options: 0x03014004 (+0x00014000, -0x00000000) 2020.02.24 15:24:37 LOG6[main]: Loading certificate from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG6[main]: Certificate loaded from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG6[main]: Loading private key from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG6[main]: Private key loaded from file: C:\Program Files\stunnel\config\mywebsite.pem 2020.02.24 15:24:37 LOG7[main]: Private key check succeeded 2020.02.24 15:24:37 LOG7[main]: ECDH initialization 2020.02.24 15:24:37 LOG7[main]: ECDH initialized with curve prime256v1 2020.02.24 15:24:37 LOG5[main]: Configuration successful 2020.02.24 15:24:37 LOG7[main]: Binding service [https] 2020.02.24 15:24:37 LOG7[main]: Listening file descriptor created (FD=292) 2020.02.24 15:24:38 LOG7[main]: Setting accept socket options (FD=292) 2020.02.24 15:24:38 LOG6[main]: Service [https] (FD=292) bound to 10.0.1.11:442 2020.02.24 15:24:38 LOG7[main]: Skipped SNI slave service [domain] 2020.02.24 15:24:38 LOG7[cron]: Cron thread initialized 2020.02.24 15:25:38 LOG6[cron]: Executing cron jobs 2020.02.24 15:25:38 LOG6[cron]: Cron jobs completed in 0 seconds 2020.02.24 15:25:38 LOG7[cron]: Waiting 86400 seconds *Log Error with port 443:* Binding service [https] to 10.0.1.11:443: Permission denied (WSAEACCES) (10013)* * *Conf:* ; Debugging stuff (may be useful for troubleshooting) debug = 7 ;output = stunnel.log ; TLS front-end to a web server [https] ; doesn't work with 443 below, works with 442 accept = 10.0.1.11:442 connect = 80 cert = C:\Program Files\stunnel\config\mywebsite.pem ; "TIMEOUTclose = 0" is a workaround for a design flaw in Microsoft SChannel ; Microsoft implementations do not use TLS close-notify alert and thus they ; are vulnerable to truncation attacks TIMEOUTclose = 0 [domain] sni = https:mywebsite.com sni = https:www.mywebsite.com cert = C:\Program Files\stunnel\config\mywebsite.pem ; connect = 80 connect = localhost:80 client = no sslVersion = TLSv1.2 -------------- Thanks, Sean

3 3

TLS connection not successful
by maktoob bareed 25 Feb '20

25 Feb '20

Hi I am trying to make TLS connection with a server that supports TLSv1.2. but each time I receive the following error: SSL_connect: ssl/record/ssl3_record.c:331: error:1408F10B:SSL routines:ssl3_get_record:wrong version number Here is my service configuration: sslVersion = TLSv1.2 options = NO_SSLv2 options = -NO_SSLv3 accept = 5512 connect = XXXXXXXXX client = yes

1 0

How to use SNI
by Paul Coshott 17 Feb '20

17 Feb '20

Hi Everyone, I have a single domain on my internet server, but it has 3 sub-domains. A separate web app runs off each one, but I need all 3 to be secured with https. I have the ssl certificates I need, but I don't know how to format the SNI section for all 3 sub-domains. The 3 domains and ports I need are : app1.pcapps.one:449 -> 127.0.0.1:8080 app2.pcapps.one:450 -> 127.0.0.1:81 app3.pcapps.one:451 -> 127.0.0.1:82 each domain has a certificate such as : cert = C:\httpscert\app1.pcapps.one.pfx Can anyone tell me how to write out the SNI section to get this working? Thanks, Paul

2 1

HTTP 404 if I don't add 127.0.0.1 in my /etc/hosts
by Masih Tavassoli 16 Feb '20

16 Feb '20

Hi Experts: I am trying to do http->https proxy for one site only: [example-proxy] client = yes accept = 127.0.0.1:5000 sni =integration-instance-idqxdofnz0ca-ia.integration.ocp.oraclecloud.com checkHost = integration-instance-idqxdofnz0ca-ia.integration.ocp.oraclecloud.com verifyPeer = yes verifyChain = yes connect = 147.154.19.235:443 CAfile = C:\Program Files (x86)\stunnel\config\ca-certs.pem If I add the following in /etc/hosts all works ok 127.0.0.1 integration-instance-idqxdofnz0ca-ia.integration.ocp.oraclecloud.com And then I have to use http://integration-instance-idqxdofnz0ca-ia.integration.ocp.oraclecloud.com… However, I just want this address to work: http://10.0.0.33:5000/ic/ws/integration/v1/flows/soap/SM_INT10_CREAT_EBS_GT… : isn’t the whole point of setting SNI to send servername on your behalf: 2020.02.15 00:46:59 LOG6[46]: SNI: sending servername: integration-instance-idqxdofnz0ca-ia.integration.ocp.oraclecloud.com 2020.02.15 00:46:59 LOG6[46]: Peer certificate required 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): before SSL initialization 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): SSLv3/TLS write client hello 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): SSLv3/TLS write client hello 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): SSLv3/TLS read server hello 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): SSLv3/TLS read change cipher spec 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): SSLv3/TLS read finished 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): SSLv3/TLS write change cipher spec 2020.02.15 00:46:59 LOG7[46]: TLS state (connect): SSLv3/TLS write finished 2020.02.15 00:46:59 LOG7[46]: 3 client connect(s) requested 2020.02.15 00:46:59 LOG7[46]: 3 client connect(s) succeeded 2020.02.15 00:46:59 LOG7[46]: 0 client renegotiation(s) requested 2020.02.15 00:46:59 LOG7[46]: 2 session reuse(s) 2020.02.15 00:46:59 LOG6[46]: TLS connected: previous session reused 2020.02.15 00:46:59 LOG6[46]: TLSv1.2 ciphersuite: ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2020.02.15 00:46:59 LOG7[46]: Compression: null, expansion: null 2020.02.15 00:46:59 LOG6[46]: Session id: E003BBF100FA809D616B2F69E08BAF0119EA856FCEE6AD209BE95F7C5815380B 2020.02.15 00:48:05 LOG7[46]: TLS alert (read): warning: close notify 2020.02.15 00:48:05 LOG6[46]: TLS closed (SSL_read) What am I missing? Thanks Masi

1 0

How to pass URL parameters in connect to
by Shashank Shekhar 14 Feb '20

14 Feb '20

Hi, I am evaluating stunnel for a project. I want to translate a HTTP call to HTTPS. When I specify the URL to send to in the config file, I get error ""Unknown TCP service "443/api/path""". My config is as below: [https] client = yes accept = 4433 connect = myurl.com:443/api/path When I try the same thing without the sub-paths "/api/path" the connection works, but of course it doesn't hit the URL I want to hit. How do I achieve this? I tried going through the documentation, but couldn't figure it out. Any help will be greatly appreciated. Thank you, Shashank

2 1

Start stunnel services on Solaris
by Erick Alejandro Tovar Rebollo 11 Feb '20

11 Feb '20

Hi. I'm new on stunnel, and I don't know how I can start stunnel on Solaris 11 , with the stunnel version 5.56, I really need help. Thanks. Regards.

1 1

Error Stunnel 5.56 Solaris
by Erick Alejandro Tovar Rebollo 06 Feb '20

06 Feb '20

Hi. I'm trying to install stunnel on a Solaris 11, but when I put the *make install* command, send me the next message. gjgom@t51ldm02:~/tmp/stunnel-5.56$ make install Making install in src /usr/bin/gmkdir -p '/usr/local/bin' /bin/sh ../libtool --mode=install /usr/bin/ginstall -c stunnel '/usr/local/bin' libtool: install: /usr/bin/ginstall -c stunnel /usr/local/bin/stunnel /usr/bin/ginstall: cannot create regular file '/usr/local/bin/stunnel': Permission denied *** Error code 1 The following command caused the error: list='stunnel'; test -n "/usr/local/bin" || list=; \ if test -n "$list"; then \ echo " /usr/bin/gmkdir -p '/usr/local/bin'"; \ /usr/bin/gmkdir -p "/usr/local/bin" || exit 1; \ fi; \ for p in $list; do echo "$p $p"; done | \ sed 's/$//' | \ while read p p1; do if test -f $p \ || test -f $p1 \ ; then echo "$p"; echo "$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' \ -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$//;s,x,x,;s/$//' | \ sed 'N;N;N;s,\n, ,g' | \ gawk 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($2 == $4) files[d] = files[d] " " $1; \ else { print "f", $3 "/" $4, $1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$dir" = .; then dir=; else dir=/$dir; fi; \ test -z "$files" || { \ echo " /bin/sh ../libtool --mode=install /usr/bin/ginstall -c $files '/usr/local/bin$dir'"; \ /bin/sh ../libtool --mode=install /usr/bin/ginstall -c $files "/usr/local/bin$dir" || exit $?; \ } \ ; done make: Fatal error: Command failed for target `install-binPROGRAMS' Current working directory /export/home/gjgom/tmp/stunnel-5.56/src *** Error code 1 The following command caused the error: make install-exec-am install-data-am make: Fatal error: Command failed for target `install-am' Current working directory /export/home/gjgom/tmp/stunnel-5.56/src *** Error code 1 The following command caused the error: fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z ''; then false; elif test -n ''; then true; elif test -n '' && test -n ''; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \ ]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs ]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo install-recursive | sed s/-recursive//`; \ case "install-recursive" in \ distclean-* | maintainer-clean-*) list='src doc tools tests' ;; \ *) list='src doc tools tests' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `install-recursive' gjgom@t51ldm02:~/tmp/stunnel-5.56$ Can you help me? Note: I´m install stunnel with a user no root, It affects? Regards

1 0

VerifyPeer = yes not working.
by Thomas Eifert 04 Feb '20

04 Feb '20

I'm running Stunnel 5.56 under Windows 10 v1909 x64. I have uncovered a case in which VerifyPeer = yes is not working. What's happening is that the locally installed certificate is old and expired, and does not match the current, up-to-date server certificate, yet Stunnel is letting it pass and verifying okay. I've pasted the certificates, config, and log below, and clearly the certificates are different. Regards, Thomas From my config file: debug = 7 delay = yes socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 socket = l:SO_LINGER=1:60 socket = r:SO_LINGER=1:60 [ircs.3] client = yes sslVersionMin = TLSv1.2 cafile = peer-ircs.3.pem verifyPeer = yes accept = 127.0.0.1:8909 connect = halcyon.il.us.dal.net:6697 From the Stunnel log: 2020.02.04 12:41:50 LOG5[9]: Service [ircs.3] connected remote server from 104.231.234.35:62290 2020.02.04 12:41:50 LOG7[9]: Setting remote socket options (FD=1012) 2020.02.04 12:41:50 LOG7[9]: Option SO_LINGER set on remote socket 2020.02.04 12:41:50 LOG7[9]: Option TCP_NODELAY set on remote socket 2020.02.04 12:41:50 LOG7[9]: Remote descriptor (FD=1012) initialized 2020.02.04 12:41:50 LOG6[9]: SNI: sending servername: halcyon.il.us.dal.net 2020.02.04 12:41:50 LOG6[9]: Peer certificate required 2020.02.04 12:41:50 LOG7[9]: TLS state (connect): before SSL initialization 2020.02.04 12:41:50 LOG7[9]: TLS state (connect): SSLv3/TLS write client hello 2020.02.04 12:41:50 LOG7[9]: TLS state (connect): SSLv3/TLS write client hello 2020.02.04 12:41:50 LOG7[9]: TLS state (connect): SSLv3/TLS read server hello 2020.02.04 12:41:50 LOG7[9]: TLS state (connect): TLSv1.3 read encrypted extensions 2020.02.04 12:41:50 LOG7[9]: Verification started at depth=1: C=US, O=Let's Encrypt, CN=Let's Encrypt Authority X3 2020.02.04 12:41:50 LOG6[9]: CERT: Pre-verification error ignored: unable to get issuer certificate 2020.02.04 12:41:50 LOG6[9]: Certificate accepted at depth=1: C=US, O=Let's Encrypt, CN=Let's Encrypt Authority X3 2020.02.04 12:41:50 LOG7[9]: Verification started at depth=0: CN=*.dal.net 2020.02.04 12:41:50 LOG7[9]: CERT: Pre-verification succeeded 2020.02.04 12:41:50 LOG6[9]: CERT: No subject checks configured 2020.02.04 12:41:50 LOG6[9]: CERT: Locally installed certificate matched 2020.02.04 12:41:50 LOG5[9]: Certificate accepted at depth=0: CN=*.dal.net Here is the locally installed certificate: -----BEGIN CERTIFICATE----- MIIFeDCCBGCgAwIBAgISA4aqIgapILZTQatLgMyS1gJ7MA0GCSqGSIb3DQEBCwUA MEoxCzAJBgNVBAYTAlVTMRYwFAYDVQQKEw1MZXQncyBFbmNyeXB0MSMwIQYDVQQD ExpMZXQncyBFbmNyeXB0IEF1dGhvcml0eSBYMzAeFw0xOTA2MDEwNDEzMjlaFw0x OTA4MzAwNDEzMjlaMBQxEjAQBgNVBAMMCSouZGFsLm5ldDCCASIwDQYJKoZIhvcN AQEBBQADggEPADCCAQoCggEBAKk+ZRY6Kr4GUS9hU+AUvgUrRzffLS4ScDNvk88F HXKe6Yx3oJnMJEGC9a5I9nJATcItOa+Xk6NKFIsGQZhFOTkV9xvbaEw2KZ14SIKK NsffEqZeQ/TUdMaHTeDXJxj1gfa+W9FK6uO1TzKrYQamdegXAv55F6KLeIPTjZj3 77AkdWuddimY3rp0gK/R1e2tkFtP/0ZeWuu1M736b6dtjXFIhzw3G8wurbGfBgfO TebZL3Kw0X5qOlyMQyOyXXUyRZMqgW7PMloGtGQ/PJKoTzqNmyWO93QB28PGHDm8 WgnSdwgXlTmVrL9Vwnzb5FIfcM1ba5nzqDGeg7tG5RcQEGkCAwEAAaOCAowwggKI MA4GA1UdDwEB/wQEAwIFoDAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIw DAYDVR0TAQH/BAIwADAdBgNVHQ4EFgQUpVm+qZ/cdM/H1vr7emXvf14+/0AwHwYD VR0jBBgwFoAUqEpqYwR93brm0Tm3pkVl7/Oo7KEwbwYIKwYBBQUHAQEEYzBhMC4G CCsGAQUFBzABhiJodHRwOi8vb2NzcC5pbnQteDMubGV0c2VuY3J5cHQub3JnMC8G CCsGAQUFBzAChiNodHRwOi8vY2VydC5pbnQteDMubGV0c2VuY3J5cHQub3JnLzBD BgNVHREEPDA6ggkqLmRhbC5uZXSCDyouaWwudXMuZGFsLm5ldIIOKi5pcHY2LmRh bC5uZXSCDCoudXMuZGFsLm5ldDBMBgNVHSAERTBDMAgGBmeBDAECATA3BgsrBgEE AYLfEwEBATAoMCYGCCsGAQUFBwIBFhpodHRwOi8vY3BzLmxldHNlbmNyeXB0Lm9y ZzCCAQMGCisGAQQB1nkCBAIEgfQEgfEA7wB2AOJpS64m6OlACeiGG7Y7g9Q+5/50 iPukjyiTAZ3d8dv+AAABaxF1ApUAAAQDAEcwRQIgGvt1P3YI9iDIkicmKnWtdA4J vwiZqB6GoGQEBnFLQuECIQDUzbe30Y4kfobQTA0qLZ85jvNFDtRzbRd9wCPXwcqO uwB1ACk8UZZUyDlluqpQ/FgH1Ldvv1h6KXLcpMMM9OVFR/R4AAABaxF1ArgAAAQD AEYwRAIgQ/jYKgNmSMGEmyVgrVBClbEawnND/kPXIZx82My6ovYCIGctTKC5u6bJ J+zCRH5QrSKMF1lOtXDeNMgYlLx7JOKLMA0GCSqGSIb3DQEBCwUAA4IBAQAcxj0r mrqFY5KluKfki7LzlXLnYGDEnaTCX3WC4trR/zDsKwLT2z/ywWjQ5O/zKk/N1+ad 0Pk9DMe0jc/AmvYPgzII7rOYIv7FF/J8z4UKF0uuxjvwvAhXr/JDKvNMkOn3Rtrw agf0eu3xyXwUty6Iip0WfrSYHcy19OrXzwaSLdMdJ5hz9CY6D+7tLk0g2+xI7XnT D+gU1J+g291HfNJet2hzmJn/I7gUJdareqSI9HtXuHw1f+LcQflAhxaTPRGgm65F XpnF9tQvtRMJFWiIO9YSrKjq9gJaW3YlN7CTDzNqtjnA3+I8gT7jCqFHYAH3ZLMu 6fJy+BkrQctqjWWp -----END CERTIFICATE----- -----BEGIN CERTIFICATE----- MIIEkjCCA3qgAwIBAgIQCgFBQgAAAVOFc2oLheynCDANBgkqhkiG9w0BAQsFADA/ MSQwIgYDVQQKExtEaWdpdGFsIFNpZ25hdHVyZSBUcnVzdCBDby4xFzAVBgNVBAMT DkRTVCBSb290IENBIFgzMB4XDTE2MDMxNzE2NDA0NloXDTIxMDMxNzE2NDA0Nlow SjELMAkGA1UEBhMCVVMxFjAUBgNVBAoTDUxldCdzIEVuY3J5cHQxIzAhBgNVBAMT GkxldCdzIEVuY3J5cHQgQXV0aG9yaXR5IFgzMIIBIjANBgkqhkiG9w0BAQEFAAOC AQ8AMIIBCgKCAQEAnNMM8FrlLke3cl03g7NoYzDq1zUmGSXhvb418XCSL7e4S0EF q6meNQhY7LEqxGiHC6PjdeTm86dicbp5gWAf15Gan/PQeGdxyGkOlZHP/uaZ6WA8 SMx+yk13EiSdRxta67nsHjcAHJyse6cF6s5K671B5TaYucv9bTyWaN8jKkKQDIZ0 Z8h/pZq4UmEUEz9l6YKHy9v6Dlb2honzhT+Xhq+w3Brvaw2VFn3EK6BlspkENnWA a6xK8xuQSXgvopZPKiAlKQTGdMDQMc2PMTiVFrqoM7hD8bEfwzB/onkxEz0tNvjj /PIzark5McWvxI0NHWQWM6r6hCm21AvA2H3DkwIDAQABo4IBfTCCAXkwEgYDVR0T AQH/BAgwBgEB/wIBADAOBgNVHQ8BAf8EBAMCAYYwfwYIKwYBBQUHAQEEczBxMDIG CCsGAQUFBzABhiZodHRwOi8vaXNyZy50cnVzdGlkLm9jc3AuaWRlbnRydXN0LmNv bTA7BggrBgEFBQcwAoYvaHR0cDovL2FwcHMuaWRlbnRydXN0LmNvbS9yb290cy9k c3Ryb290Y2F4My5wN2MwHwYDVR0jBBgwFoAUxKexpHsscfrb4UuQdf/EFWCFiRAw VAYDVR0gBE0wSzAIBgZngQwBAgEwPwYLKwYBBAGC3xMBAQEwMDAuBggrBgEFBQcC ARYiaHR0cDovL2Nwcy5yb290LXgxLmxldHNlbmNyeXB0Lm9yZzA8BgNVHR8ENTAz MDGgL6AthitodHRwOi8vY3JsLmlkZW50cnVzdC5jb20vRFNUUk9PVENBWDNDUkwu Y3JsMB0GA1UdDgQWBBSoSmpjBH3duubRObemRWXv86jsoTANBgkqhkiG9w0BAQsF AAOCAQEA3TPXEfNjWDjdGBX7CVW+dla5cEilaUcne8IkCJLxWh9KEik3JHRRHGJo uM2VcGfl96S8TihRzZvoroed6ti6WqEBmtzw3Wodatg+VyOeph4EYpr/1wXKtx8/ wApIvJSwtmVi4MFU5aMqrSDE6ea73Mj2tcMyo5jMd6jmeWUHK8so/joWUoHOUgwu X4Po1QYz+3dszkDqMp4fklxBwXRsW10KXzPMTZ+sOPAveyxindmjkW8lGy+QsRlG PfZ+G6Z6h7mjem0Y+iWlkYcV4PIWL1iwBi8saCbGS5jN2p8M+X+Q7UNKEkROb3N6 KOqkqm57TH2H3eDJAkSnh6/DNFu0Qg== -----END CERTIFICATE----- Here is the remote server certificate: -----BEGIN CERTIFICATE----- MIIFeTCCBGGgAwIBAgISBMC6zEv90htsFIzCbGOKGCpvMA0GCSqGSIb3DQEBCwUA MEoxCzAJBgNVBAYTAlVTMRYwFAYDVQQKEw1MZXQncyBFbmNyeXB0MSMwIQYDVQQD ExpMZXQncyBFbmNyeXB0IEF1dGhvcml0eSBYMzAeFw0yMDAxMjgwNTIzMjFaFw0y MDA0MjcwNTIzMjFaMBQxEjAQBgNVBAMMCSouZGFsLm5ldDCCASIwDQYJKoZIhvcN AQEBBQADggEPADCCAQoCggEBAKk+ZRY6Kr4GUS9hU+AUvgUrRzffLS4ScDNvk88F HXKe6Yx3oJnMJEGC9a5I9nJATcItOa+Xk6NKFIsGQZhFOTkV9xvbaEw2KZ14SIKK NsffEqZeQ/TUdMaHTeDXJxj1gfa+W9FK6uO1TzKrYQamdegXAv55F6KLeIPTjZj3 77AkdWuddimY3rp0gK/R1e2tkFtP/0ZeWuu1M736b6dtjXFIhzw3G8wurbGfBgfO TebZL3Kw0X5qOlyMQyOyXXUyRZMqgW7PMloGtGQ/PJKoTzqNmyWO93QB28PGHDm8 WgnSdwgXlTmVrL9Vwnzb5FIfcM1ba5nzqDGeg7tG5RcQEGkCAwEAAaOCAo0wggKJ MA4GA1UdDwEB/wQEAwIFoDAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIw DAYDVR0TAQH/BAIwADAdBgNVHQ4EFgQUpVm+qZ/cdM/H1vr7emXvf14+/0AwHwYD VR0jBBgwFoAUqEpqYwR93brm0Tm3pkVl7/Oo7KEwbwYIKwYBBQUHAQEEYzBhMC4G CCsGAQUFBzABhiJodHRwOi8vb2NzcC5pbnQteDMubGV0c2VuY3J5cHQub3JnMC8G CCsGAQUFBzAChiNodHRwOi8vY2VydC5pbnQteDMubGV0c2VuY3J5cHQub3JnLzBD BgNVHREEPDA6ggkqLmRhbC5uZXSCDyouaWwudXMuZGFsLm5ldIIOKi5pcHY2LmRh bC5uZXSCDCoudXMuZGFsLm5ldDBMBgNVHSAERTBDMAgGBmeBDAECATA3BgsrBgEE AYLfEwEBATAoMCYGCCsGAQUFBwIBFhpodHRwOi8vY3BzLmxldHNlbmNyeXB0Lm9y ZzCCAQQGCisGAQQB1nkCBAIEgfUEgfIA8AB3ALIeBcyLos2KIE6HZvkruYolIGdr 2vpw57JJUy3vi5BeAAABb+rRlmkAAAQDAEgwRgIhAOG8C3vcxqEvj3TSqe7Y7peQ OInmtrkR0eQ9OFLVUIeUAiEAp0ONBILMiR2i0dVimSXFJv9NJDa3wi3tt3bRF5OO eDMAdQBvU3asMfAxGdiZAKRRFf93FRwR2QLBACkGjbIImjfZEwAAAW/q0ZafAAAE AwBGMEQCIBxS2C2cCPWFKKzof8BduUN6UFiWnyoRqAGAMG36IgylAiBjFDiXnuJs bVorvhguH6J9+YcPC36yFohKBCh+V7M0nzANBgkqhkiG9w0BAQsFAAOCAQEAnDE3 p/uxes7SKdspdwIhsC4Jwn3ulm4sGcbhJVBRWyYxp7ucGJdy/PxcEfb/CD5sszbw 9hsM56B7gno8ts/yNGvpceIoGEa7oK4AycEeWfapp5M9s11HyE06HwDfTA7wc1Kv g+PkHmbqZkLziN+UdPIlRm8dSljusvsNY1cMGRt5fszMJ5+gOaC3gj2AB6+aGIeN cwwNX3BlX10v88I3OUAkDWNlmPERA5BXo88ucZ75SwRZg7H8s66wdMYFi2LvbTHV GsXyDPVKnyViBtGCNI14UEmTDjUiHmqtzjqK2BTpSzNGYXjuPe1Zz0VIZDERPWin YxseV8k6nrZgr51Eag== -----END CERTIFICATE----- -----BEGIN CERTIFICATE----- MIIEkjCCA3qgAwIBAgIQCgFBQgAAAVOFc2oLheynCDANBgkqhkiG9w0BAQsFADA/ MSQwIgYDVQQKExtEaWdpdGFsIFNpZ25hdHVyZSBUcnVzdCBDby4xFzAVBgNVBAMT DkRTVCBSb290IENBIFgzMB4XDTE2MDMxNzE2NDA0NloXDTIxMDMxNzE2NDA0Nlow SjELMAkGA1UEBhMCVVMxFjAUBgNVBAoTDUxldCdzIEVuY3J5cHQxIzAhBgNVBAMT GkxldCdzIEVuY3J5cHQgQXV0aG9yaXR5IFgzMIIBIjANBgkqhkiG9w0BAQEFAAOC AQ8AMIIBCgKCAQEAnNMM8FrlLke3cl03g7NoYzDq1zUmGSXhvb418XCSL7e4S0EF q6meNQhY7LEqxGiHC6PjdeTm86dicbp5gWAf15Gan/PQeGdxyGkOlZHP/uaZ6WA8 SMx+yk13EiSdRxta67nsHjcAHJyse6cF6s5K671B5TaYucv9bTyWaN8jKkKQDIZ0 Z8h/pZq4UmEUEz9l6YKHy9v6Dlb2honzhT+Xhq+w3Brvaw2VFn3EK6BlspkENnWA a6xK8xuQSXgvopZPKiAlKQTGdMDQMc2PMTiVFrqoM7hD8bEfwzB/onkxEz0tNvjj /PIzark5McWvxI0NHWQWM6r6hCm21AvA2H3DkwIDAQABo4IBfTCCAXkwEgYDVR0T AQH/BAgwBgEB/wIBADAOBgNVHQ8BAf8EBAMCAYYwfwYIKwYBBQUHAQEEczBxMDIG CCsGAQUFBzABhiZodHRwOi8vaXNyZy50cnVzdGlkLm9jc3AuaWRlbnRydXN0LmNv bTA7BggrBgEFBQcwAoYvaHR0cDovL2FwcHMuaWRlbnRydXN0LmNvbS9yb290cy9k c3Ryb290Y2F4My5wN2MwHwYDVR0jBBgwFoAUxKexpHsscfrb4UuQdf/EFWCFiRAw VAYDVR0gBE0wSzAIBgZngQwBAgEwPwYLKwYBBAGC3xMBAQEwMDAuBggrBgEFBQcC ARYiaHR0cDovL2Nwcy5yb290LXgxLmxldHNlbmNyeXB0Lm9yZzA8BgNVHR8ENTAz MDGgL6AthitodHRwOi8vY3JsLmlkZW50cnVzdC5jb20vRFNUUk9PVENBWDNDUkwu Y3JsMB0GA1UdDgQWBBSoSmpjBH3duubRObemRWXv86jsoTANBgkqhkiG9w0BAQsF AAOCAQEA3TPXEfNjWDjdGBX7CVW+dla5cEilaUcne8IkCJLxWh9KEik3JHRRHGJo uM2VcGfl96S8TihRzZvoroed6ti6WqEBmtzw3Wodatg+VyOeph4EYpr/1wXKtx8/ wApIvJSwtmVi4MFU5aMqrSDE6ea73Mj2tcMyo5jMd6jmeWUHK8so/joWUoHOUgwu X4Po1QYz+3dszkDqMp4fklxBwXRsW10KXzPMTZ+sOPAveyxindmjkW8lGy+QsRlG PfZ+G6Z6h7mjem0Y+iWlkYcV4PIWL1iwBi8saCbGS5jN2p8M+X+Q7UNKEkROb3N6 KOqkqm57TH2H3eDJAkSnh6/DNFu0Qg== -----END CERTIFICATE----- -- Attention: This message and all attachments are private and may contain information that is confidential and privileged. If you received this message in error, please notify the sender by reply email and delete the message immediately.

1 0

performance check list
by Howard, William 23 Jan '20

23 Jan '20

Is there a check list for implementation of stunnel on RHEL 7

1 0

stunnel AIX lastest version
by Erick Alejandro Tovar Rebollo 23 Jan '20

23 Jan '20

Hi. I need to download the latest version of stunnel for AIX, but I can´t find that I have the 7.1 AIX version Can you help me? Regards.

1 0

Connection reset: (maybe the wrong forum)
by Per Gunnarsson 15 Jan '20

15 Jan '20

Hello! I have tried to stream to an icecast server through stunnel usung liquidsoap. Somewhere the stream gets stuck. I want to where. Maybe I should have posted this on the Tor mailing list first, since the traffic is forwarded through Tor. But before the stream went to Tor, it went through stunnel. The liquidsoap snippet which tries to stream (password,mount name, stream description and stream name modified: output.external(id="Tor", fallible=true, reopen_delay=3.0, %vorbis(quality=0.4 , samplerate=48000, channels=2), "/usr/bin/oggfwd -n streamname -d 'stream description' localhost 9887 password /mount", mksafe(buffer(full))) I had a script which was supposed to pick up this stream and forward it on a cloud server (passwords etc. modified): #!/bin/bash /usr/bin/curl -V http://localhost:9887/mount | \ /usr/bin/torsocks /usr/bin/oggfwd -n streamname -d 'stream description' superdupersecret.onion 8000 password /mount #/usr/bin/curl -T - -s --socks5 localhost:9050 http://superdupersecret.onion/mount exec "/home/per/bin/test.sh" stunnel.conf on cloud: setuid = stunnel4 setgid = stunnel4 ; PID file is created inside the chroot jail (if enabled) pid = /var/run/stunnel4/stunnel.pid ; Debugging stuff (may be useful for troubleshooting) ;foreground = yes debug = info output = /var/log/stunnel4/stunnel.log [liquidsoap-client] client = yes accept = localhost:8081 connect = mustafejen.se:9998 PSKsecrets = /etc/stunnel/secrets.txt [hequidtor-client] connect = localhost:9050 accept = 95.216.184.255:9888 PSKsecrets = /etc/stunnel/secrets.txt [Deep Web Radio In] client = yes accept = 95.216.184.255:9887 connect = localhost:9050 PSKsecrets = /etc/stunnel/secrets.txt stunnel.conf in my living room: setuid = stunnel4 setgid = stunnel4 ; PID file is created inside the chroot jail (if enabled) pid = /var/run/stunnel4/stunnel.pid ; Debugging stuff (may be useful for troubleshooting) ;foreground = yes debug = info output = /var/log/stunnel4/stunnel.log [liquidsoap-server] ;client = yes connect = mustafejen.se:8081 accept = mustafejen.se:9998 PSKsecrets = /etc/stunnel/secrets.txt [hequidtor-server] client = yes accept = localhost:9888 connect = 95.216.184.255:9888 PSKsecrets = /etc/stunnel/secrets.txt [Deep Web Radio Out] accept = localhost:9887 connect = 95.216.184.255:9887 PSKsecrets = /etc/stunnel/secrets.txt Log file from cloud: 2020.01.15 06:25:01 LOG5[main]: Log file reopened 2020.01.15 10:29:22 LOG5[main]: Terminated 2020.01.15 10:29:22 LOG5[ui]: stunnel 5.44 on x86_64-pc-linux-gnu platform 2020.01.15 10:29:22 LOG5[ui]: Compiled with OpenSSL 1.1.0g 2 Nov 2017 2020.01.15 10:29:22 LOG5[ui]: Running with OpenSSL 1.1.1 11 Sep 2018 2020.01.15 10:29:22 LOG5[ui]: Update OpenSSL shared libraries or rebuild stunnel 2020.01.15 10:29:22 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6,SYSTEMD TLS:ENGINE,FIPS,OCSP,PSK,SNI Auth:LIBWRAP 2020.01.15 10:29:22 LOG5[ui]: Reading configuration from file /etc/stunnel/stunnel.conf 2020.01.15 10:29:22 LOG5[ui]: UTF-8 byte order mark detected 2020.01.15 10:29:22 LOG5[ui]: FIPS mode disabled 2020.01.15 10:29:22 LOG6[ui]: Initializing service [liquidsoap-client] 2020.01.15 10:29:23 LOG6[ui]: PSK identities: 1 retrieved 2020.01.15 10:29:23 LOG6[ui]: Initializing service [hequidtor-client] 2020.01.15 10:29:23 LOG6[ui]: PSK identities: 1 retrieved 2020.01.15 10:29:23 LOG6[ui]: Using dynamic DH parameters 2020.01.15 10:29:23 LOG6[ui]: Initializing service [Deep Web Radio In] 2020.01.15 10:29:23 LOG6[ui]: PSK identities: 1 retrieved 2020.01.15 10:29:23 LOG5[ui]: Configuration successful Log file from my living room: 2020.01.15 10:20:13 LOG5[ui]: stunnel 5.56 on x86_64-pc-linux-gnu platform 2020.01.15 10:20:13 LOG5[ui]: Compiled/running with OpenSSL 1.1.1d 10 Sep 2019 2020.01.15 10:20:13 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6,SYSTEMD TLS:ENGINE,FIPS,OCSP,PSK,SNI Auth:LIBWRAP 2020.01.15 10:20:13 LOG5[ui]: Reading configuration from file /etc/stunnel/stunnel.conf 2020.01.15 10:20:13 LOG5[ui]: UTF-8 byte order mark detected 2020.01.15 10:20:13 LOG5[ui]: FIPS mode disabled 2020.01.15 10:20:13 LOG6[ui]: PSKsecrets line 1: 40-byte ASCII key configured for identity "per" 2020.01.15 10:20:13 LOG6[ui]: Initializing service [liquidsoap-server] 2020.01.15 10:20:13 LOG6[ui]: PSK identities: 1 retrieved 2020.01.15 10:20:13 LOG6[ui]: DH initialization not needed 2020.01.15 10:20:13 LOG6[ui]: PSKsecrets line 1: 40-byte ASCII key configured for identity "per" 2020.01.15 10:20:13 LOG6[ui]: Initializing service [hequidtor-server] 2020.01.15 10:20:13 LOG6[ui]: PSK identities: 1 retrieved 2020.01.15 10:20:13 LOG6[ui]: PSKsecrets line 1: 40-byte ASCII key configured for identity "per" 2020.01.15 10:20:13 LOG6[ui]: Initializing service [Deep Web Radio Out] 2020.01.15 10:20:13 LOG6[ui]: PSK identities: 1 retrieved 2020.01.15 10:20:13 LOG6[ui]: DH initialization not needed 2020.01.15 10:20:13 LOG5[ui]: Configuration successful 2020.01.15 10:20:13 LOG6[ui]: Service [liquidsoap-server] (FD=9) bound to 10.0.0.6:9998 2020.01.15 10:20:13 LOG6[ui]: Service [hequidtor-server] (FD=10) bound to ::1:9888 2020.01.15 10:20:13 LOG6[ui]: Service [hequidtor-server] (FD=11) bound to 127.0.0.1:9888 2020.01.15 10:20:13 LOG6[ui]: Service [Deep Web Radio Out] (FD=12) bound to ::1:9887 2020.01.15 10:20:13 LOG6[ui]: Service [Deep Web Radio Out] (FD=13) bound to 127.0.0.1:9887 2020.01.15 10:20:13 LOG6[cron]: Executing cron jobs 2020.01.15 10:20:13 LOG6[cron]: Cron jobs completed in 0 seconds 2020.01.15 10:32:56 LOG5[0]: Service [Deep Web Radio Out] accepted connection from ::1:44732 2020.01.15 10:32:56 LOG6[0]: Peer certificate not required 2020.01.15 10:32:56 LOG3[0]: SSL_accept: ../ssl/record/ssl3_record.c:331: error:1408F10B:SSL routines:ssl3_get_record:wrong version number 2020.01.15 10:32:56 LOG5[0]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:32:56 LOG5[1]: Service [Deep Web Radio Out] accepted connection from ::1:44734 2020.01.15 10:32:56 LOG6[1]: Peer certificate not required 2020.01.15 10:32:56 LOG3[1]: SSL_accept: ../ssl/record/ssl3_record.c:321: error:1408F09C:SSL routines:ssl3_get_record:http request 2020.01.15 10:32:56 LOG5[1]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:32:56 LOG5[2]: Service [Deep Web Radio Out] accepted connection from ::1:44736 2020.01.15 10:32:56 LOG6[2]: Peer certificate not required 2020.01.15 10:32:56 LOG3[2]: SSL_accept: ../ssl/t1_lib.c:2719: error:14201076:SSL routines:tls_choose_sigalg:no suitable signature algorithm 2020.01.15 10:32:56 LOG5[2]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:33:44 LOG5[3]: Service [Deep Web Radio Out] accepted connection from ::1:44760 2020.01.15 10:33:44 LOG6[3]: Peer certificate not required 2020.01.15 10:33:44 LOG3[3]: SSL_accept: ../ssl/record/ssl3_record.c:331: error:1408F10B:SSL routines:ssl3_get_record:wrong version number 2020.01.15 10:33:44 LOG5[3]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:33:44 LOG5[4]: Service [Deep Web Radio Out] accepted connection from ::1:44762 2020.01.15 10:33:44 LOG6[4]: Peer certificate not required 2020.01.15 10:33:44 LOG3[4]: SSL_accept: ../ssl/record/ssl3_record.c:321: error:1408F09C:SSL routines:ssl3_get_record:http request 2020.01.15 10:33:44 LOG5[4]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:33:44 LOG5[5]: Service [Deep Web Radio Out] accepted connection from ::1:44764 2020.01.15 10:33:44 LOG6[5]: Peer certificate not required 2020.01.15 10:33:44 LOG3[5]: SSL_accept: ../ssl/t1_lib.c:2719: error:14201076:SSL routines:tls_choose_sigalg:no suitable signature algorithm 2020.01.15 10:33:44 LOG5[5]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:34:50 LOG5[6]: Service [Deep Web Radio Out] accepted connection from ::1:44788 2020.01.15 10:34:50 LOG6[6]: Peer certificate not required 2020.01.15 10:34:50 LOG3[6]: SSL_accept: ../ssl/record/ssl3_record.c:331: error:1408F10B:SSL routines:ssl3_get_record:wrong version number 2020.01.15 10:34:50 LOG5[6]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:34:50 LOG5[7]: Service [Deep Web Radio Out] accepted connection from ::1:44790 2020.01.15 10:34:50 LOG6[7]: Peer certificate not required 2020.01.15 10:34:50 LOG3[7]: SSL_accept: ../ssl/record/ssl3_record.c:321: error:1408F09C:SSL routines:ssl3_get_record:http request 2020.01.15 10:34:50 LOG5[7]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:34:50 LOG5[8]: Service [Deep Web Radio Out] accepted connection from ::1:44792 2020.01.15 10:34:50 LOG6[8]: Peer certificate not required 2020.01.15 10:34:50 LOG3[8]: SSL_accept: ../ssl/t1_lib.c:2719: error:14201076:SSL routines:tls_choose_sigalg:no suitable signature algorithm 2020.01.15 10:34:50 LOG5[8]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:48:17 LOG5[9]: Service [Deep Web Radio Out] accepted connection from ::1:44854 2020.01.15 10:48:17 LOG6[9]: Peer certificate not required 2020.01.15 10:48:17 LOG3[9]: SSL_accept: ../ssl/record/ssl3_record.c:325: error:1408F09B:SSL routines:ssl3_get_record:https proxy request 2020.01.15 10:48:17 LOG5[9]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:48:17 LOG5[10]: Service [Deep Web Radio Out] accepted connection from ::1:44856 2020.01.15 10:48:17 LOG6[10]: Peer certificate not required 2020.01.15 10:48:17 LOG3[10]: SSL_accept: ../ssl/record/ssl3_record.c:325: error:1408F09B:SSL routines:ssl3_get_record:https proxy request 2020.01.15 10:48:17 LOG5[10]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:48:32 LOG5[11]: Service [Deep Web Radio Out] accepted connection from ::1:44858 2020.01.15 10:48:32 LOG6[11]: Peer certificate not required 2020.01.15 10:48:32 LOG3[11]: SSL_accept: ../ssl/record/ssl3_record.c:325: error:1408F09B:SSL routines:ssl3_get_record:https proxy request 2020.01.15 10:48:32 LOG5[11]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:48:32 LOG5[12]: Service [Deep Web Radio Out] accepted connection from ::1:44860 2020.01.15 10:48:32 LOG6[12]: Peer certificate not required 2020.01.15 10:48:32 LOG3[12]: SSL_accept: ../ssl/record/ssl3_record.c:325: error:1408F09B:SSL routines:ssl3_get_record:https proxy request 2020.01.15 10:48:32 LOG5[12]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:49:01 LOG5[13]: Service [Deep Web Radio Out] accepted connection from ::1:44864 2020.01.15 10:49:01 LOG6[13]: Peer certificate not required 2020.01.15 10:49:01 LOG3[13]: SSL_accept: ../ssl/record/ssl3_record.c:325: error:1408F09B:SSL routines:ssl3_get_record:https proxy request 2020.01.15 10:49:01 LOG5[13]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:49:01 LOG5[14]: Service [Deep Web Radio Out] accepted connection from ::1:44866 2020.01.15 10:49:01 LOG6[14]: Peer certificate not required 2020.01.15 10:49:01 LOG3[14]: SSL_accept: ../ssl/record/ssl3_record.c:325: error:1408F09B:SSL routines:ssl3_get_record:https proxy request 2020.01.15 10:49:01 LOG5[14]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:57:28 LOG5[15]: Service [Deep Web Radio Out] accepted connection from ::1:44914 2020.01.15 10:57:28 LOG6[15]: Peer certificate not required 2020.01.15 10:57:28 LOG3[15]: SSL_accept: ../ssl/record/ssl3_record.c:331: error:1408F10B:SSL routines:ssl3_get_record:wrong version number 2020.01.15 10:57:28 LOG5[15]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:57:28 LOG5[16]: Service [Deep Web Radio Out] accepted connection from ::1:44916 2020.01.15 10:57:28 LOG6[16]: Peer certificate not required 2020.01.15 10:57:28 LOG3[16]: SSL_accept: ../ssl/record/ssl3_record.c:321: error:1408F09C:SSL routines:ssl3_get_record:http request 2020.01.15 10:57:28 LOG5[16]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 10:57:28 LOG5[17]: Service [Deep Web Radio Out] accepted connection from ::1:44918 2020.01.15 10:57:28 LOG6[17]: Peer certificate not required 2020.01.15 10:57:28 LOG3[17]: SSL_accept: ../ssl/t1_lib.c:2719: error:14201076:SSL routines:tls_choose_sigalg:no suitable signature algorithm 2020.01.15 10:57:28 LOG5[17]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:24:24 LOG5[18]: Service [Deep Web Radio Out] accepted connection from ::1:45012 2020.01.15 11:24:24 LOG6[18]: Peer certificate not required 2020.01.15 11:24:24 LOG3[18]: SSL_accept: ../ssl/record/ssl3_record.c:331: error:1408F10B:SSL routines:ssl3_get_record:wrong version number 2020.01.15 11:24:24 LOG5[18]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:24:24 LOG5[19]: Service [Deep Web Radio Out] accepted connection from ::1:45014 2020.01.15 11:24:24 LOG6[19]: Peer certificate not required 2020.01.15 11:24:24 LOG3[19]: SSL_accept: ../ssl/record/ssl3_record.c:321: error:1408F09C:SSL routines:ssl3_get_record:http request 2020.01.15 11:24:24 LOG5[19]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:24:24 LOG5[20]: Service [Deep Web Radio Out] accepted connection from ::1:45016 2020.01.15 11:24:24 LOG6[20]: Peer certificate not required 2020.01.15 11:24:24 LOG3[20]: SSL_accept: ../ssl/t1_lib.c:2719: error:14201076:SSL routines:tls_choose_sigalg:no suitable signature algorithm 2020.01.15 11:24:24 LOG5[20]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:25:16 LOG5[21]: Service [Deep Web Radio Out] accepted connection from ::1:45038 2020.01.15 11:25:16 LOG6[21]: Peer certificate not required 2020.01.15 11:25:16 LOG3[21]: SSL_accept: ../ssl/record/ssl3_record.c:331: error:1408F10B:SSL routines:ssl3_get_record:wrong version number 2020.01.15 11:25:16 LOG5[21]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:25:16 LOG5[22]: Service [Deep Web Radio Out] accepted connection from ::1:45040 2020.01.15 11:25:16 LOG6[22]: Peer certificate not required 2020.01.15 11:25:16 LOG3[22]: SSL_accept: ../ssl/record/ssl3_record.c:321: error:1408F09C:SSL routines:ssl3_get_record:http request 2020.01.15 11:25:16 LOG5[22]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:25:16 LOG5[23]: Service [Deep Web Radio Out] accepted connection from ::1:45042 2020.01.15 11:25:16 LOG6[23]: Peer certificate not required 2020.01.15 11:25:16 LOG3[23]: SSL_accept: ../ssl/t1_lib.c:2719: error:14201076:SSL routines:tls_choose_sigalg:no suitable signature algorithm 2020.01.15 11:25:16 LOG5[23]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:28:38 LOG5[24]: Service [Deep Web Radio Out] accepted connection from ::1:45070 2020.01.15 11:28:38 LOG6[24]: Peer certificate not required 2020.01.15 11:28:38 LOG3[24]: SSL_accept: ../ssl/record/ssl3_record.c:331: error:1408F10B:SSL routines:ssl3_get_record:wrong version number 2020.01.15 11:28:38 LOG5[24]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:28:38 LOG5[25]: Service [Deep Web Radio Out] accepted connection from ::1:45072 2020.01.15 11:28:38 LOG6[25]: Peer certificate not required 2020.01.15 11:28:38 LOG3[25]: SSL_accept: ../ssl/record/ssl3_record.c:321: error:1408F09C:SSL routines:ssl3_get_record:http request 2020.01.15 11:28:38 LOG5[25]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:28:38 LOG5[26]: Service [Deep Web Radio Out] accepted connection from ::1:45074 2020.01.15 11:28:38 LOG6[26]: Peer certificate not required 2020.01.15 11:28:38 LOG3[26]: SSL_accept: ../ssl/t1_lib.c:2719: error:14201076:SSL routines:tls_choose_sigalg:no suitable signature algorithm 2020.01.15 11:28:38 LOG5[26]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:30:06 LOG5[27]: Service [Deep Web Radio Out] accepted connection from ::1:45096 2020.01.15 11:30:06 LOG6[27]: Peer certificate not required 2020.01.15 11:30:06 LOG3[27]: SSL_accept: ../ssl/record/ssl3_record.c:331: error:1408F10B:SSL routines:ssl3_get_record:wrong version number 2020.01.15 11:30:06 LOG5[27]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:30:06 LOG5[28]: Service [Deep Web Radio Out] accepted connection from ::1:45098 2020.01.15 11:30:06 LOG6[28]: Peer certificate not required 2020.01.15 11:30:06 LOG3[28]: SSL_accept: ../ssl/record/ssl3_record.c:321: error:1408F09C:SSL routines:ssl3_get_record:http request 2020.01.15 11:30:06 LOG5[28]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:30:06 LOG5[29]: Service [Deep Web Radio Out] accepted connection from ::1:45100 2020.01.15 11:30:06 LOG6[29]: Peer certificate not required 2020.01.15 11:30:06 LOG3[29]: SSL_accept: ../ssl/t1_lib.c:2719: error:14201076:SSL routines:tls_choose_sigalg:no suitable signature algorithm 2020.01.15 11:30:06 LOG5[29]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:32:34 LOG5[30]: Service [Deep Web Radio Out] accepted connection from ::1:45136 2020.01.15 11:32:34 LOG6[30]: Peer certificate not required 2020.01.15 11:32:34 LOG3[30]: SSL_accept: ../ssl/record/ssl3_record.c:331: error:1408F10B:SSL routines:ssl3_get_record:wrong version number 2020.01.15 11:32:34 LOG5[30]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:32:34 LOG5[31]: Service [Deep Web Radio Out] accepted connection from ::1:45138 2020.01.15 11:32:34 LOG6[31]: Peer certificate not required 2020.01.15 11:32:34 LOG3[31]: SSL_accept: ../ssl/record/ssl3_record.c:321: error:1408F09C:SSL routines:ssl3_get_record:http request 2020.01.15 11:32:34 LOG5[31]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2020.01.15 11:32:34 LOG5[32]: Service [Deep Web Radio Out] accepted connection from ::1:45140 2020.01.15 11:32:34 LOG6[32]: Peer certificate not required 2020.01.15 11:32:34 LOG3[32]: SSL_accept: ../ssl/t1_lib.c:2719: error:14201076:SSL routines:tls_choose_sigalg:no suitable signature algorithm 2020.01.15 11:32:34 LOG5[32]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket

1 0

stunnel5 to stunnel4 not work
by Tu, Robin 15 Jan '20

15 Jan '20

I'm working on openvpn over stunnel. My configuration can work with windows and linux. both are stunnel4. But it never work out in android. I have ubuntu18.04 and set as stunnel4 server side. I try to get connected with android stunnel: SSLSocks<https://github.com/comp500/SSLSocks/releases/tag/0.0.17-beta>, which should be compiled with stunnel5. It simply not work. I got "NETWORK_EOF_ERROR" time to time. If I remove stunnel tunnel, it will just work. So I think it's stunnel5 to stunnel4 issue. But how to avaoid such issue? Best Regards Robin

1 0