- stunnel-users - stunnel.org

Althttpd web server setup using ZeroSSL
by jose isaias cabrera 29 Nov '21

29 Nov '21

Greetings! I have the ssl files from ZeroSSL, and I am trying to set up https using stunnel4 on an ubuntu server. I am new to https, I would love some of your help setting this up. Here is what I have done so far: 1. Installed Althttpd and http is working fine on the home network and from the external network. 2. I have installed stunnel4 on the ubuntu server jcabrera@selva:~$ stunnel -v [ ] Clients allowed=500 [.] stunnel 5.56 on x86_64-pc-linux-gnu platform [.] Compiled with OpenSSL 1.1.1c 28 May 2019 [.] Running with OpenSSL 1.1.1f 31 Mar 2020 [.] Threading:PTHREAD Sockets:POLL,IPv6,SYSTEMD TLS:ENGINE,FIPS,OCSP,PSK,SNI Auth:LIBWRAP [ ] errno: (*__errno_location ()) [!] Invalid configuration file name "-v" [!] realpath: No such file or directory (2) [ ] Deallocating section defaults 3. I have placed the ZeroSSl ssl files on the ssl directory as per ZeroSSL instructions jcabrera@selva:~$ ls -l /etc/ssl/*.crt -rw-r--r-- 1 root root 2431 Oct 20 16:27 /etc/ssl/ca_bundle.crt -rw-r--r-- 1 root root 2354 Oct 20 16:31 /etc/ssl/certificate.crt root@selva:/home/jcabrera# ls -l /etc/ssl/private/*.key -rw-r--r-- 1 root root 1702 Oct 20 16:33 /etc/ssl/private/private.key 4. Created the the /etc/stunnel/stunnel.conf file with these entries: root@selva:/home/jcabrera# cat /etc/stunnel/stunnel.conf cert = /etc/ssl/certificate.crt key = /etc/ssl/private/private.key \[https\] accept = :::443 TIMEOUTclose = 0 exec = /usr/bin/althttpd execargs = /usr/bin/althttpd -logfile ~/www/http.log -root ~/www -user www-data -https 1 And, I don't know what else to do. Any help would be greatly appreciated. Thanks. josé -- What if eternity is real? Where will you spend it? Hmmmm...

2 3

Office 365 connections stopped working
by Ben Bazian 26 Nov '21

26 Nov '21

This has been working for years and recently stopped. I am a novice here. Can someone look at this and please tell me what is happening? It is an old server that does not support TLS so we put Stunnel in front of it. I am sure the version of stunnel is pretty old. Maybe a TLS level issue? 2021.10.26 14:47:30 LOG7[21968:139797665822784]: SSL options set: 0x01000004 2021.10.26 14:47:30 LOG6[21968:139797665822784]: Initializing service [SMTP Outgoing] 2021.10.26 14:47:30 LOG7[21968:139797665822784]: SSL options set: 0x01000004 2021.10.26 14:47:30 LOG6[21968:139797665822784]: Initializing service [IMAP] 2021.10.26 14:47:30 LOG7[21968:139797665822784]: SSL options set: 0x01000004 2021.10.26 14:47:30 LOG5[21968:139797665822784]: Configuration successful 2021.10.26 14:47:30 LOG7[21968:139797665822784]: Service [POP3 Incoming] (FD=12) bound to 0.0.0.0:110 2021.10.26 14:47:30 LOG7[21968:139797665822784]: Service [SMTP Outgoing] (FD=13) bound to 0.0.0.0:25 2021.10.26 14:47:30 LOG7[21968:139797665822784]: Service [IMAP] (FD=14) bound to 0.0.0.0:143 2021.10.26 14:47:30 LOG7[21974:139797665822784]: Created pid file /var/run/stunnel.pid 2021.10.26 14:48:30 LOG7[21974:139797665822784]: Service [IMAP] accepted (FD=3) from 10.55.3.159:1852 2021.10.26 14:48:30 LOG7[21974:139797665818368]: Service [IMAP] started 2021.10.26 14:48:30 LOG7[21974:139797665818368]: Waiting for a libwrap process 2021.10.26 14:48:30 LOG7[21974:139797665818368]: Acquired libwrap process #0 2021.10.26 14:48:30 LOG7[21974:139797665818368]: Releasing libwrap process #0 2021.10.26 14:48:30 LOG7[21974:139797665818368]: Released libwrap process #0 2021.10.26 14:48:30 LOG7[21974:139797665818368]: Service [IMAP] permitted by libwrap from 10.55.3.159:1852 2021.10.26 14:48:30 LOG5[21974:139797665818368]: Service [IMAP] accepted connection from 10.55.3.159:1852 2021.10.26 14:48:30 LOG6[21974:139797665818368]: connect_blocking: connecting 52.96.87.226:993 2021.10.26 14:48:30 LOG7[21974:139797665818368]: connect_blocking: s_poll_wait 52.96.87.226:993: waiting 10 seconds 2021.10.26 14:48:30 LOG5[21974:139797665818368]: connect_blocking: connected 52.96.87.226:993 2021.10.26 14:48:30 LOG5[21974:139797665818368]: Service [IMAP] connected remote server from 10.55.3.200:51358 2021.10.26 14:48:30 LOG7[21974:139797665818368]: Remote socket (FD=16) initialized 2021.10.26 14:48:30 LOG7[21974:139797665818368]: SNI: sending servername: outlook.office365.com 2021.10.26 14:48:30 LOG7[21974:139797665818368]: SSL state (connect): before/connect initialization 2021.10.26 14:48:30 LOG7[21974:139797665818368]: SSL state (connect): SSLv3 write client hello A 2021.10.26 14:48:30 LOG3[21974:139797665818368]: SSL_connect: Peer suddenly disconnected 2021.10.26 14:48:30 LOG5[21974:139797665818368]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2021.10.26 14:48:30 LOG7[21974:139797665818368]: Remote socket (FD=16) closed 2021.10.26 14:48:30 LOG7[21974:139797665818368]: Local socket (FD=3) closed 2021.10.26 14:48:30 LOG7[21974:139797665818368]: Service [IMAP] finished (0 left)

4 5

setting permissions on a unix socket
by David Mandelberg 03 Nov '21

03 Nov '21

Hi, Is there any way for stunnel to set permissions on a unix socket created with the `accept` option? I see setuid and setgid at https://www.stunnel.org/static/stunnel.html but nothing about a umask or permissions. P.S. The link on https://www.stunnel.org/lists.html to see the archive is broken. Apologies if this has come up before.

1 0

Stunnel connection to Akamai Cloud Servers (Hostheaders) with SNI
by Alan C. Bonnici 06 Oct '21

06 Oct '21

Hi, I am trying to use stunnel to exchange data with a service hosted on Akamai Servers. There is a need to implement SNI. In posts dated from 2016 which I found online, Stunnel did not support Host Headers. Is there a workaround, or has Stunnel implemented this functionality? I will be testing using postman. A sample config to get me going would really be appreciated. The URL is related to plivo. It is ak-api.plivo.com. Thank you in anticipation.

3 6

Is it possible to inhibit writing the stunnel logs to the / var / log / messages file?
by simona vittori 28 Sep '21

28 Sep '21

Hello, I ask you if it's possible to inhibit writing the stunnel logs to the / var / log / messages file. How do you it? Thank you in advance Bye Simona

2 1

Need a clean way to reject a client IP
by robin.kerdiles＠emanrisk.fr 28 Sep '21

28 Sep '21

Hello everyone, I'm doing a few tests on a dockerized service for stunnel under Alpine. stunnel -version stunnel 5.60 on x86_64-alpine-linux-musl platform Compiled with OpenSSL 1.1.1k 25 Mar 2021 Running with OpenSSL 1.1.1l 24 Aug 2021 Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,OCSP,PSK,SNI If I set a wrong certificate on client side, my server logs get spammed with these lines : 2021.09.28 07:43:52 LOG5[66]: Service [***] accepted connection from *** 2021.09.28 07:43:52 LOG4[66]: CERT: Pre-verification error: unable to get local issuer certificate 2021.09.28 07:43:52 LOG4[66]: Rejected by CERT at depth=2: C=***, O=***, CN=*** 2021.09.28 07:43:52 LOG3[66]: SSL_accept: ssl/statem/statem_srvr.c:3711: error:1417C086:SSL routines:tls_process_client_certificate:certificate verify failed 2021.09.28 07:43:52 LOG5[66]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket The cpu usage goes up to 35% and it seems there is no way to set a timeout before trying to reconnect on client side (which is not the perfect fix by the way). On server side, I don't know if we are supposed to be able to do something about that (for example rate limiting the requests ?). Even the fail2ban filter doesn't seem to support this case. And anyway it seems it requires manual patching on stunnel source code for the logs. Would it be possible to put on the same line the client IP and a message about the connection which has been rejected ? fail2ban filter : https://github.com/fail2ban/fail2ban/blob/master/config/filter.d/stunnel.co… What would be appreciated -> a log line in this format : 2021.09.28 07:43:52 LOG4[66]: HOST has been rejected by CERT at depth=2: C=***, O=***, CN=*** Of course, I don't have in mind the other possible cases (missing cert, etc...). Thank you in advance, Robin KERDILES

2 1

Disguising HTTP 503 services unavailable
by Haruka Takagi 18 Sep '21

18 Sep '21

It is my understanding that; stunnel clients give up connecting servers because of HTTP 503 services unavailable, tunneling failure causes stunnel clients to notify original senders of errors, and original senders acknowledge communication failure and stop program. I would like stunnel clients to reconnecting servers in cases of 503 and not to notify original senders of failure, in order that original senders are unaware of failure and can continue program. If possible, I want to do this by writing stunnel.conf without modifying souce codes. Is this configuration possible?

4 5

protocol = proxy with redirect
by Rob Hoes 15 Sep '21

15 Sep '21

Hi, I am using client certificate verification with the redirect option, so that the connection gets transferred to a separate socket in case the certificate is not accepted (rather than dropping the connection). This works well, unless I add the option “protocol = proxy” in order to get the client’s TCP params passed on. In this case, the redirect option seems to be ignored. Are the “redirect” and “protocol = proxy” options incompatible with one another? Is there an alternative? Thanks, Rob

2 1

How to resolve DNS by stunnel?
by shiga＠smart-cast.co.jp 14 Sep '21

14 Sep '21

Hi, I'm facing DNS issues when connecting to a server using a dynamic IP address. I think stunnel refers to DNS at startup, so if the IP address changes in the middle, it will get a connection error. Can this be resolved with the "delay=on" option? I'm looking for a way to handle a dynamic IP address in stunnel. Thanks.

2 1

Session reuse problem
by Alen Loncaric 10 Sep '21

10 Sep '21

Hi guys, any reason my stunnel would not reuse sessions? 2021.09.09 13:14:00 LOG7[9]: TLS state (connect): before SSL initialization 2021.09.09 13:14:00 LOG6[8]: writesocket: Socket is closed 2021.09.09 13:14:00 LOG7[9]: Initializing application specific data for session authenticated 2021.09.09 13:14:00 LOG5[8]: Connection closed: 170 byte(s) sent to TLS, 32768 byte(s) sent to socket 2021.09.09 13:14:00 LOG7[8]: Remote descriptor (FD=10) closed 2021.09.09 13:14:00 LOG7[8]: Local descriptor (FD=3) closed 2021.09.09 13:14:00 LOG7[8]: Service [squid] finished 2021.09.09 13:14:00 LOG7[ui]: Found 1 ready file descriptor(s) 2021.09.09 13:14:00 LOG7[ui]: FD=4 events=0x1 revents=0x1 2021.09.09 13:14:00 LOG7[ui]: FD=10 events=0x1 revents=0x0 2021.09.09 13:14:00 LOG7[ui]: Dispatching a signal from the signal pipe 2021.09.09 13:14:00 LOG7[ui]: Processing SIGCHLD 2021.09.09 13:14:00 LOG7[ui]: Retrieving pid statuses with waitpid() 2021.09.09 13:14:00 LOG6[ui]: Process 1933 finished with code 0 2021.09.09 13:14:00 LOG7[9]: TLS state (connect): SSLv3/TLS write client hello 2021.09.09 13:14:00 LOG7[9]: TLS state (connect): SSLv3/TLS write client hello 2021.09.09 13:14:00 LOG7[9]: TLS state (connect): SSLv3/TLS read server hello 2021.09.09 13:14:00 LOG6[9]: Certificate verification disabled 2021.09.09 13:14:00 LOG6[9]: Certificate verification disabled 2021.09.09 13:14:00 LOG7[9]: TLS state (connect): SSLv3/TLS read server certificate 2021.09.09 13:14:00 LOG6[9]: Client certificate not requested 2021.09.09 13:14:00 LOG7[9]: TLS state (connect): SSLv3/TLS read server done 2021.09.09 13:14:00 LOG7[9]: TLS state (connect): SSLv3/TLS write client key exchange 2021.09.09 13:14:00 LOG7[9]: TLS state (connect): SSLv3/TLS write change cipher spec 2021.09.09 13:14:00 LOG7[9]: TLS state (connect): SSLv3/TLS write finished 2021.09.09 13:14:00 LOG7[9]: TLS state (connect): SSLv3/TLS write finished 2021.09.09 13:14:00 LOG7[9]: TLS state (connect): SSLv3/TLS read server session ticket 2021.09.09 13:14:00 LOG7[9]: TLS state (connect): SSLv3/TLS read change cipher spec 2021.09.09 13:14:00 LOG7[9]: TLS state (connect): SSLv3/TLS read finished 2021.09.09 13:14:00 LOG7[9]: New session callback 2021.09.09 13:14:00 LOG7[9]: Peer certificate was cached (2037 bytes) 2021.09.09 13:14:00 LOG6[9]: Session id: DC783240F69C6910A2F8B9829504840EF619E30A14FEA982C944FBFB6828555F 2021.09.09 13:14:00 LOG7[9]: 1 client connect(s) requested 2021.09.09 13:14:00 LOG7[9]: 1 client connect(s) succeeded 2021.09.09 13:14:00 LOG7[9]: 0 client renegotiation(s) requested 2021.09.09 13:14:00 LOG7[9]: 0 session reuse(s) 2021.09.09 13:14:00 LOG6[9]: TLS connected: new session negotiated 2021.09.09 13:14:00 LOG6[9]: TLSv1.2 ciphersuite: AES128-GCM-SHA256 (128-bit encryption) 2021.09.09 13:14:00 LOG3[9]: SSL_get_peer_tmp_key: Peer suddenly disconnected 2021.09.09 13:14:00 LOG7[9]: Compression: null, expansion: null 2021.09.09 13:14:01 LOG6[9]: Read socket closed (readsocket) 2021.09.09 13:14:01 LOG7[9]: Sending close_notify alert 2021.09.09 13:14:01 LOG6[9]: socket fd: Broken pipe (32) 2021.09.09 13:14:01 LOG7[9]: TLS alert (write): warning: close notify 2021.09.09 13:14:01 LOG6[9]: SSL_shutdown successfully sent close_notify alert 2021.09.09 13:14:01 LOG6[9]: writesocket: Socket is closed 2021.09.09 13:14:01 LOG5[9]: Connection closed: 170 byte(s) sent to TLS, 32768 byte(s) sent to socket 2021.09.09 13:14:01 LOG7[9]: Remote descriptor (FD=10) closed 2021.09.09 13:14:01 LOG7[9]: Local descriptor (FD=3) closed 2021.09.09 13:14:01 LOG7[9]: Service [squid] finished 2021.09.09 13:14:01 LOG7[ui]: Found 1 ready file descriptor(s) 2021.09.09 13:14:01 LOG7[ui]: FD=4 events=0x1 revents=0x1 2021.09.09 13:14:01 LOG7[ui]: FD=10 events=0x1 revents=0x0 2021.09.09 13:14:01 LOG7[ui]: Dispatching a signal from the signal pipe 2021.09.09 13:14:01 LOG7[ui]: Processing SIGCHLD 2021.09.09 13:14:01 LOG7[ui]: Retrieving pid statuses with waitpid() 2021.09.09 13:14:01 LOG6[ui]: Process 1934 finished with code 0 2021.09.09 13:14:03 LOG7[ui]: Found 1 ready file descriptor(s) 2021.09.09 13:14:03 LOG7[ui]: FD=4 events=0x1 revents=0x0 2021.09.09 13:14:03 LOG7[ui]: FD=10 events=0x1 revents=0x1 2021.09.09 13:14:03 LOG7[ui]: Service [squid] accepted (FD=3) from 127.0.0.1:49567 2021.09.09 13:14:03 LOG7[10]: Service [squid] started 2021.09.09 13:14:03 LOG7[10]: Setting local socket options (FD=3) 2021.09.09 13:14:03 LOG7[10]: Option TCP_NODELAY set on local socket 2021.09.09 13:14:03 LOG5[10]: Service [squid] accepted connection from 127.0.0.1:49567 2021.09.09 13:14:03 LOG6[10]: s_connect: connecting 44.44.44.44:522 2021.09.09 13:14:03 LOG7[10]: s_connect: s_poll_wait 44.44.44.44:522: waiting 10 seconds 2021.09.09 13:14:03 LOG7[10]: FD=6 events=0x1 revents=0x0 2021.09.09 13:14:03 LOG7[10]: FD=10 events=0x5 revents=0x0 2021.09.09 13:14:03 LOG5[10]: s_connect: connected 44.44.44.44:522 2021.09.09 13:14:03 LOG5[10]: Service [squid] connected remote server from 10.1.3.57:42843 2021.09.09 13:14:03 LOG7[10]: Setting remote socket options (FD=10) 2021.09.09 13:14:03 LOG7[10]: Option TCP_NODELAY set on remote socket 2021.09.09 13:14:03 LOG7[10]: Remote descriptor (FD=10) initialized 2021.09.09 13:14:03 LOG6[10]: SNI: sending servername: 44.44.44.44 2021.09.09 13:14:03 LOG6[10]: Peer certificate not required 2021.09.09 13:14:03 LOG7[10]: TLS state (connect): before SSL initialization 2021.09.09 13:14:03 LOG7[10]: Initializing application specific data for session authenticated 2021.09.09 13:14:03 LOG7[10]: TLS state (connect): SSLv3/TLS write client hello 2021.09.09 13:14:03 LOG7[10]: TLS state (connect): SSLv3/TLS write client hello 2021.09.09 13:14:03 LOG7[10]: TLS state (connect): SSLv3/TLS read server hello 2021.09.09 13:14:03 LOG6[10]: Certificate verification disabled 2021.09.09 13:14:03 LOG6[10]: Certificate verification disabled 2021.09.09 13:14:03 LOG7[10]: TLS state (connect): SSLv3/TLS read server certificate 2021.09.09 13:14:03 LOG6[10]: Client certificate not requested 2021.09.09 13:14:03 LOG7[10]: TLS state (connect): SSLv3/TLS read server done 2021.09.09 13:14:03 LOG7[10]: TLS state (connect): SSLv3/TLS write client key exchange 2021.09.09 13:14:03 LOG7[10]: TLS state (connect): SSLv3/TLS write change cipher spec 2021.09.09 13:14:03 LOG7[10]: TLS state (connect): SSLv3/TLS write finished 2021.09.09 13:14:03 LOG7[10]: TLS state (connect): SSLv3/TLS write finished 2021.09.09 13:14:03 LOG7[10]: TLS state (connect): SSLv3/TLS read server session ticket 2021.09.09 13:14:03 LOG7[10]: TLS state (connect): SSLv3/TLS read change cipher spec 2021.09.09 13:14:03 LOG7[10]: TLS state (connect): SSLv3/TLS read finished 2021.09.09 13:14:03 LOG7[10]: New session callback 2021.09.09 13:14:03 LOG7[10]: Peer certificate was cached (2037 bytes) 2021.09.09 13:14:03 LOG6[10]: Session id: 85FD50E2A9D57B12D315C834EBA949CF015B7776C6A18486B06CE53F4C52D689 2021.09.09 13:14:03 LOG7[10]: 1 client connect(s) requested 2021.09.09 13:14:03 LOG7[10]: 1 client connect(s) succeeded 2021.09.09 13:14:03 LOG7[10]: 0 client renegotiation(s) requested 2021.09.09 13:14:03 LOG7[10]: 0 session reuse(s) 2021.09.09 13:14:03 LOG6[10]: TLS connected: new session negotiated 2021.09.09 13:14:03 LOG6[10]: TLSv1.2 ciphersuite: AES128-GCM-SHA256 (128-bit encryption) 2021.09.09 13:14:03 LOG3[10]: SSL_get_peer_tmp_key: Peer suddenly disconnected 2021.09.09 13:14:03 LOG7[10]: Compression: null, expansion: null 2021.09.09 13:14:03 LOG7[ui]: Found 1 ready file descriptor(s) 2021.09.09 13:14:03 LOG7[ui]: FD=4 events=0x1 revents=0x0 2021.09.09 13:14:03 LOG7[ui]: FD=10 events=0x1 revents=0x1 2021.09.09 13:14:03 LOG7[ui]: Service [squid] accepted (FD=3) from 127.0.0.1:49569 2021.09.09 13:14:03 LOG7[11]: Service [squid] started 2021.09.09 13:14:03 LOG7[11]: Setting local socket options (FD=3) 2021.09.09 13:14:03 LOG7[11]: Option TCP_NODELAY set on local socket 2021.09.09 13:14:03 LOG5[11]: Service [squid] accepted connection from 127.0.0.1:49569 2021.09.09 13:14:03 LOG6[11]: s_connect: connecting 44.44.44.44:522 2021.09.09 13:14:03 LOG7[11]: s_connect: s_poll_wait 44.44.44.44:522: waiting 10 seconds 2021.09.09 13:14:03 LOG7[11]: FD=6 events=0x1 revents=0x0 2021.09.09 13:14:03 LOG7[11]: FD=10 events=0x5 revents=0x0 2021.09.09 13:14:03 LOG5[11]: s_connect: connected 44.44.44.44:522 2021.09.09 13:14:03 LOG5[11]: Service [squid] connected remote server from 10.1.3.57:42845 2021.09.09 13:14:03 LOG6[10]: Read socket closed (readsocket) 2021.09.09 13:14:03 LOG7[11]: Setting remote socket options (FD=10) 2021.09.09 13:14:03 LOG7[11]: Option TCP_NODELAY set on remote socket 2021.09.09 13:14:03 LOG7[11]: Remote descriptor (FD=10) initialized 2021.09.09 13:14:03 LOG7[10]: Sending close_notify alert 2021.09.09 13:14:03 LOG6[11]: SNI: sending servername: 44.44.44.44 2021.09.09 13:14:03 LOG6[10]: socket fd: Broken pipe (32) 2021.09.09 13:14:03 LOG6[11]: Peer certificate not required 2021.09.09 13:14:03 LOG7[10]: TLS alert (write): warning: close notify 2021.09.09 13:14:03 LOG6[10]: SSL_shutdown successfully sent close_notify alert 2021.09.09 13:14:03 LOG6[10]: writesocket: Socket is closed 2021.09.09 13:14:03 LOG7[11]: TLS state (connect): before SSL initialization2021.09.09 13:14:03 LOG5[10]: Connection closed: 170 byte(s) sent to TLS, 32768 byte(s) sent to socket 2021.09.09 13:14:03 LOG7[11]: Initializing application specific data for session authenticated 2021.09.09 13:14:03 LOG7[10]: Remote descriptor (FD=10) closed 2021.09.09 13:14:03 LOG7[10]: Local descriptor (FD=3) closed 2021.09.09 13:14:03 LOG7[10]: Service [squid] finished 2021.09.09 13:14:03 LOG7[ui]: Found 1 ready file descriptor(s) 2021.09.09 13:14:03 LOG7[ui]: FD=4 events=0x1 revents=0x1 2021.09.09 13:14:03 LOG7[ui]: FD=10 events=0x1 revents=0x0 2021.09.09 13:14:03 LOG7[ui]: Dispatching a signal from the signal pipe 2021.09.09 13:14:03 LOG7[ui]: Processing SIGCHLD 2021.09.09 13:14:03 LOG7[ui]: Retrieving pid statuses with waitpid() 2021.09.09 13:14:03 LOG6[ui]: Process 1937 finished with code 0 2021.09.09 13:14:03 LOG7[11]: TLS state (connect): SSLv3/TLS write client hello 2021.09.09 13:14:03 LOG7[11]: TLS state (connect): SSLv3/TLS write client hello 2021.09.09 13:14:03 LOG7[11]: TLS state (connect): SSLv3/TLS read server hello 2021.09.09 13:14:03 LOG6[11]: Certificate verification disabled 2021.09.09 13:14:03 LOG6[11]: Certificate verification disabled 2021.09.09 13:14:03 LOG7[11]: TLS state (connect): SSLv3/TLS read server certificate 2021.09.09 13:14:03 LOG6[11]: Client certificate not requested 2021.09.09 13:14:03 LOG7[11]: TLS state (connect): SSLv3/TLS read server done 2021.09.09 13:14:03 LOG7[11]: TLS state (connect): SSLv3/TLS write client key exchange 2021.09.09 13:14:03 LOG7[11]: TLS state (connect): SSLv3/TLS write change cipher spec 2021.09.09 13:14:03 LOG7[11]: TLS state (connect): SSLv3/TLS write finished 2021.09.09 13:14:03 LOG7[11]: TLS state (connect): SSLv3/TLS write finished 2021.09.09 13:14:03 LOG7[11]: TLS state (connect): SSLv3/TLS read server session ticket 2021.09.09 13:14:03 LOG7[11]: TLS state (connect): SSLv3/TLS read change cipher spec 2021.09.09 13:14:03 LOG7[11]: TLS state (connect): SSLv3/TLS read finished 2021.09.09 13:14:03 LOG7[11]: New session callback 2021.09.09 13:14:03 LOG7[11]: Peer certificate was cached (2037 bytes) 2021.09.09 13:14:03 LOG6[11]: Session id: B171BF0D4CDB808D50C3CE4CDAA6AE53F2396068A9BD947D8277294F91CCFBFE 2021.09.09 13:14:03 LOG7[11]: 1 client connect(s) requested 2021.09.09 13:14:03 LOG7[11]: 1 client connect(s) succeeded 2021.09.09 13:14:03 LOG7[11]: 0 client renegotiation(s) requested 2021.09.09 13:14:03 LOG7[11]: 0 session reuse(s) 2021.09.09 13:14:03 LOG6[11]: TLS connected: new session negotiated 2021.09.09 13:14:03 LOG6[11]: TLSv1.2 ciphersuite: AES128-GCM-SHA256 (128-bit encryption) 2021.09.09 13:14:03 LOG3[11]: SSL_get_peer_tmp_key: Peer suddenly disconnected 2021.09.09 13:14:03 LOG7[11]: Compression: null, expansion: null 2021.09.09 13:14:03 LOG6[11]: Read socket closed (readsocket) 2021.09.09 13:14:03 LOG7[11]: Sending close_notify alert 2021.09.09 13:14:03 LOG6[11]: socket fd: Broken pipe (32) 2021.09.09 13:14:03 LOG7[11]: TLS alert (write): warning: close notify 2021.09.09 13:14:03 LOG6[11]: SSL_shutdown successfully sent close_notify alert 2021.09.09 13:14:03 LOG6[11]: writesocket: Socket is closed 2021.09.09 13:14:03 LOG5[11]: Connection closed: 170 byte(s) sent to TLS, 32768 byte(s) sent to socket 2021.09.09 13:14:03 LOG7[11]: Remote descriptor (FD=10) closed 2021.09.09 13:14:03 LOG7[11]: Local descriptor (FD=3) closed 2021.09.09 13:14:03 LOG7[11]: Service [squid] finished 2021.09.09 13:14:03 LOG7[ui]: Found 1 ready file descriptor(s) 2021.09.09 13:14:03 LOG7[ui]: FD=4 events=0x1 revents=0x1 2021.09.09 13:14:03 LOG7[ui]: FD=10 events=0x1 revents=0x0 2021.09.09 13:14:03 LOG7[ui]: Dispatching a signal from the signal pipe 2021.09.09 13:14:03 LOG7[ui]: Processing SIGCHLD 2021.09.09 13:14:03 LOG7[ui]: Retrieving pid statuses with waitpid() 2021.09.09 13:14:03 LOG6[ui]: Process 1938 finished with code 0 If i test with s_client: openssl s_client -connect 44.44.44.44:522 -reconnect I see TLS reused every time. Thank you!

1 0

stunnel logfile and setuid/setgid
by Norbert Hanke 02 Sep '21

02 Sep '21

Hi, I'm new to this list and hope I don't raise a question that has been raised many times before. I searched the archive and couldn't find that discussed previously... I want to configure stunnel using setuid = nobody setgid = nobody while having it write its output to its own logfile, not using syslog, with output = /var/log/stunnel.log log = append syslog = no This works when user nobody has write-access to an existing logfile, or user nobody is allowed to create the file in the directory. Both is not a good idea: user nobody should not have write access there. I could limit potential damage by having a separate directory with such access to nobody, but that is still kind of wrong. Or I could create a separate user only for stunnel and give that user full access to a separate directory: that would be more secure, only a hijacked (hopefully not) stunnel could tamper with its own logfiles. Shouldn't stunnel create and/or open the logfile while it is still running as root, and only then switch to user nobody? Or is there an option that I did not see so far allowing for what I'm trying? Thanks for any help. Regards, Norbert

1 0

Stunnel 5.60 started via Stunnel TLS wrapper on Windows 10 machine doesn't seem to be working
by ling＠aliko.com 01 Sep '21

01 Sep '21

Hi, I am trying to get Stunnel 5.60 started automatically as a service. My stunnel.conf is stored under C:\Program Files (x86)\stunnel\config works fine if I run stunnel.exe manually from CMD or bring up the GUI and reload configuration. Now I would like it to start automatically after reboots. I tried running stunnel.exe -install which installs the Stunnel TLS wrapper service. Starting the service does not however do anything. The "Path to execute" it installs for the service is "C:\Program Files (x86)\stunnel\config" -service -install. I don't see anything in the log. I can see that the stunnel.exe process is running in task manager. But running netstat -ao shows that no port is being listened to by the PID. Tried removing my stunnel.conf file and the service will still starts but stunnel doesn't seem to be doing anything. What could be the problem?

2 2

Minor bugfix: parameter type
by Peter Pentchev 19 Aug '21

19 Aug '21

Hi, Thanks a lot for the continued development of stunnel! While checking whether my Debian packages can be built with the upcoming GCC 11, I found (or rather, GCC reported) a minor discrepancy in the type of the "hash" parameter to the crypt_DES() function in protocol.c. What do you think about the attached patch? It is also available at: https://salsa.debian.org/debian/stunnel/-/blob/master/debian/patches/06-des… Thanks again, and keep up the great work! G'luck, Peter -- Peter Pentchev roam(a)ringlet.net roam(a)debian.org pp(a)storpool.com PGP key: http://people.FreeBSD.org/~roam/roam.key.asc Key fingerprint 2EE7 A7A5 17FC 124C F115 C354 651E EFB0 2527 DF13

1 0

stunnel 60 released
by Michał Trojnara 16 Aug '21

16 Aug '21

Dear Users, I have released version 5.60 of stunnel. ### Version 5.60, 2021.08.16, urgency: LOW * New features - New 'sessionResume' service-level option to allow or disallow session resumption - Added support for the new SSL_set_options() values. - Download fresh ca-certs.pem for each new release. * Bugfixes - Fixed 'redirect' with 'protocol'. This combination is not supported by 'smtp', 'pop3' and 'imap' protocols. - Enforced minimum WIN32 log window size. - Fixed support for password-protected private keys with OpenSSL 3.0 (thx to Dmitry Belyavskiy). Home page: https://www.stunnel.org/ Download: https://www.stunnel.org/downloads.html SHA-256 hashes: c45d765b1521861fea9b03b425b9dd7d48b3055128c0aec673bba5ef9b8f787d stunnel-5.60.tar.gz 190b79cb94a4f70f362e44c32d150edf8ae660734d3fa0cbd990c3821e8f3083 stunnel-5.60-win64-installer.exe bac9bb4503cc5091d78c9deb6aa013fc07e39d67db0dfcc073b098db52f54427 stunnel-5.60-android.zip Best regards, Mike

1 0

Is it possible to tunnel all tcp sessions of docker containers
by Yichun Ding 15 Aug '21

15 Aug '21

Hi, We are looking for the possibility to encrypt all the tcp sessions of containers between hosts with stunnel. So far I had no luck to come up with an iptables rule to route the packets to stunnel running on the host. We cannot change the container code as there are too many of them. Any advice would be appreciated! -yd

1 0

stunnel ignores chroot /etc/hosts
by kmx1818＠gmail.com 10 Aug '21

10 Aug '21

Hello all! On my localhost I've got a java 1.4 tls1.0 app/service running, which is hard-coded to http-call a soap service (tls1.0 level too) running on a remote host, say, svchost. Host resolution is "files" only (ie /etc/hosts) - no dns. The aim is to make this java client tls1.2-compliant. My solution is: 1/ configure svchost to be (an alias of) localhost - in global /etc/hosts 127.0.0.1 localhost svchost 2/ configure a chroot env for stunell with its own /etc/hosts 1.2.3.4 svchost (needless to say that to make it work I had to copy /etc's nsswitch.conf resolv.conf, a bunch of libraries, esp libnsl and nsl_files etc, and create another lot of /dev entries) I've tested it with the native getent command: $ getent hosts svchost 127.0.0.1 $ chroot /var/run/stunnel/chroot getent hosts svchost 1.2.3.4 3/ run stunnel in chroot mode: # /opt/csw/bin/stunnel -version stunnel 5.59 on sparc-sun-solaris2.10 platform Compiled/running with OpenSSL 1.0.2u 20 Dec 2019 ; for tls1 clients client = yes sslVersion = TLSv1.2 delay = yes chroot = /var/run/stunnel/chroot [tls12] accept = localhost:80 connect = svchost:443 ; Alas, stunnel still resolves svchost from the global /etc/hosts - not from chroot's!: $ curl -kL http://svchost/service curl: (52) Empty reply from server ...and in /var/adm/messages: …LOG[4]: Service [tls12] accepted connection from 127.0.0.1:47944 …LOG[4]: s_connect: connecting 127.0.0.1:443 …LOG[4]: s_connect: s_poll_wait 127.0.0.1:443: waiting 10 seconds …LOG[4]: s_connect: connect 127.0.0.1:443: Connection refused (146) …LOG[4]: No more addresses to connect I've tried foreground yes/no, truss/strace - nothing useful... What am I missing!? Thank you in advance!

2 2

Unexpected socket close while sending mail
by zfefm＠gmx.de 27 Jul '21

27 Jul '21

Hi, since several days I try to get stunnel working to add TLS1.2 or higher support to my outdated email client program (Applemail 4.6) as my service provider will stop supporting the old protocols soon. The protocol of stunnel looks as if the connection gets established well. But as soon I want to send a mail my mail program tries for 10-15s to send an then gives up. In the stunnel protocol (time stamp 16:54:22) the server seems to accept the connection, but about 10-15s later I get: Unexpected socket close (s_read) Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket Any ideas what could be the problem? Thanks. conf and protocol attached. conf: setuid = nobody setgid = nogroup foreground = yes debug = 7 output = /usr/local/etc/stunnel/stunnel.log [strato-pop3] client = yes verifyChain = yes accept = 127.0.0.1:110 connect = pop3.strato.de:995 CApath = /usr/local/etc/stunnel/ cert = /usr/local/etc/stunnel/stunnel.pem checkHost = pop3.strato.de protocol = pop3 [strato-smtp] client = yes verifyChain = yes accept = 127.0.0.1:25 connect = smtp.strato.de:465 checkHost = smtp.strato.de CApath = /usr/local/etc/stunnel/ cert = /usr/local/etc/stunnel/stunnel.pem protocol = smtp protocol : 2021.07.22 16:53:49 LOG6[ui]: Initializing inetd mode configuration 2021.07.22 16:53:49 LOG7[ui]: Clients allowed=125 2021.07.22 16:53:49 LOG5[ui]: stunnel 5.59 on x86_64-apple-darwin10.8.0 platform 2021.07.22 16:53:49 LOG5[ui]: Compiled/running with OpenSSL 1.1.1k 25 Mar 2021 2021.07.22 16:53:49 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,OCSP,PSK,SNI Auth:LIBWRAP 2021.07.22 16:53:49 LOG7[ui]: errno: (*__error()) 2021.07.22 16:53:49 LOG6[ui]: Initializing inetd mode configuration 2021.07.22 16:53:49 LOG5[ui]: Reading configuration from file /usr/local/etc/stunnel/stunnel.conf 2021.07.22 16:53:49 LOG5[ui]: UTF-8 byte order mark detected 2021.07.22 16:53:49 LOG5[ui]: FIPS mode disabled 2021.07.22 16:53:49 LOG6[ui]: Compression enabled: 0 methods 2021.07.22 16:53:49 LOG7[ui]: No PRNG seeding was required 2021.07.22 16:53:49 LOG6[ui]: Initializing service [strato-pop3] 2021.07.22 16:53:49 LOG6[ui]: stunnel default security level set: 2 2021.07.22 16:53:49 LOG7[ui]: Ciphers: HIGH:!aNULL:!SSLv2:!DH:!kDHEPSK 2021.07.22 16:53:49 LOG7[ui]: TLSv1.3 ciphersuites: TLS_AES_256_GCM_SHA384:TLS_AES_128_GCM_SHA256:TLS_CHACHA20_POLY1305_SHA256 2021.07.22 16:53:49 LOG7[ui]: TLS options: 0x02100004 (+0x00000000, -0x00000000) 2021.07.22 16:53:49 LOG6[ui]: Loading certificate from file: /usr/local/etc/stunnel/stunnel.pem 2021.07.22 16:53:49 LOG6[ui]: Certificate loaded from file: /usr/local/etc/stunnel/stunnel.pem 2021.07.22 16:53:49 LOG6[ui]: Loading private key from file: /usr/local/etc/stunnel/stunnel.pem 2021.07.22 16:53:49 LOG6[ui]: Private key loaded from file: /usr/local/etc/stunnel/stunnel.pem 2021.07.22 16:53:49 LOG7[ui]: Private key check succeeded 2021.07.22 16:53:49 LOG6[ui]: DH initialization skipped: client section 2021.07.22 16:53:49 LOG7[ui]: ECDH initialization 2021.07.22 16:53:49 LOG7[ui]: ECDH initialized with curves X25519:P-256:X448:P-521:P-384 2021.07.22 16:53:49 LOG6[ui]: Initializing service [strato-smtp] 2021.07.22 16:53:50 LOG6[ui]: stunnel default security level set: 2 2021.07.22 16:53:50 LOG7[ui]: Ciphers: HIGH:!aNULL:!SSLv2:!DH:!kDHEPSK 2021.07.22 16:53:50 LOG7[ui]: TLSv1.3 ciphersuites: TLS_AES_256_GCM_SHA384:TLS_AES_128_GCM_SHA256:TLS_CHACHA20_POLY1305_SHA256 2021.07.22 16:53:50 LOG7[ui]: TLS options: 0x02100004 (+0x00000000, -0x00000000) 2021.07.22 16:53:50 LOG6[ui]: Loading certificate from file: /usr/local/etc/stunnel/stunnel.pem 2021.07.22 16:53:50 LOG6[ui]: Certificate loaded from file: /usr/local/etc/stunnel/stunnel.pem 2021.07.22 16:53:50 LOG6[ui]: Loading private key from file: /usr/local/etc/stunnel/stunnel.pem 2021.07.22 16:53:50 LOG6[ui]: Private key loaded from file: /usr/local/etc/stunnel/stunnel.pem 2021.07.22 16:53:50 LOG7[ui]: Private key check succeeded 2021.07.22 16:53:50 LOG6[ui]: DH initialization skipped: client section 2021.07.22 16:53:50 LOG7[ui]: ECDH initialization 2021.07.22 16:53:50 LOG7[ui]: ECDH initialized with curves X25519:P-256:X448:P-521:P-384 2021.07.22 16:53:50 LOG5[ui]: Configuration successful 2021.07.22 16:53:50 LOG7[ui]: Deallocating deployed section defaults 2021.07.22 16:53:50 LOG7[ui]: Binding service [strato-pop3] 2021.07.22 16:53:50 LOG7[ui]: Listening file descriptor created (FD=8) 2021.07.22 16:53:50 LOG7[ui]: Setting accept socket options (FD=8) 2021.07.22 16:53:50 LOG7[ui]: Option SO_REUSEADDR set on accept socket 2021.07.22 16:53:50 LOG6[ui]: Service [strato-pop3] (FD=8) bound to 127.0.0.1:110 2021.07.22 16:53:50 LOG7[ui]: Binding service [strato-smtp] 2021.07.22 16:53:50 LOG7[ui]: Listening file descriptor created (FD=10) 2021.07.22 16:53:50 LOG7[ui]: Setting accept socket options (FD=10) 2021.07.22 16:53:50 LOG7[ui]: Option SO_REUSEADDR set on accept socket 2021.07.22 16:53:50 LOG6[ui]: Service [strato-smtp] (FD=10) bound to 127.0.0.1:25 2021.07.22 16:53:50 LOG7[ui]: No pid file being created 2021.07.22 16:53:50 LOG7[cron]: Cron thread initialized 2021.07.22 16:53:50 LOG6[cron]: Executing cron jobs 2021.07.22 16:53:50 LOG6[cron]: Cron jobs completed in 0 seconds 2021.07.22 16:53:50 LOG7[cron]: Waiting 86400 seconds 2021.07.22 16:54:22 LOG7[ui]: Found 1 ready file descriptor(s) 2021.07.22 16:54:22 LOG7[ui]: FD=4 events=0x1 revents=0x0 2021.07.22 16:54:22 LOG7[ui]: FD=8 events=0x1 revents=0x1 2021.07.22 16:54:22 LOG7[ui]: FD=10 events=0x1 revents=0x0 2021.07.22 16:54:22 LOG7[ui]: Service [strato-pop3] accepted (FD=3) from 127.0.0.1:49864 2021.07.22 16:54:22 LOG7[0]: Service [strato-pop3] started 2021.07.22 16:54:22 LOG7[0]: Setting local socket options (FD=3) 2021.07.22 16:54:22 LOG7[0]: Option TCP_NODELAY set on local socket 2021.07.22 16:54:22 LOG5[0]: Service [strato-pop3] accepted connection from 127.0.0.1:49864 2021.07.22 16:54:22 LOG6[0]: s_connect: connecting 81.169.145.131:995 2021.07.22 16:54:22 LOG7[0]: s_connect: s_poll_wait 81.169.145.131:995: waiting 10 seconds 2021.07.22 16:54:22 LOG7[0]: FD=6 events=0x1 revents=0x0 2021.07.22 16:54:22 LOG7[0]: FD=13 events=0x5 revents=0x0 2021.07.22 16:54:22 LOG5[0]: s_connect: connected 81.169.145.131:995 2021.07.22 16:54:22 LOG5[0]: Service [strato-pop3] connected remote server from 192.168.17.130:49865 2021.07.22 16:54:22 LOG7[0]: Setting remote socket options (FD=13) 2021.07.22 16:54:22 LOG7[0]: Option TCP_NODELAY set on remote socket 2021.07.22 16:54:22 LOG7[0]: Remote descriptor (FD=13) initialized 2021.07.22 16:55:22 LOG3[0]: Unexpected socket close (s_read) 2021.07.22 16:55:22 LOG5[0]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2021.07.22 16:55:22 LOG7[0]: Remote descriptor (FD=13) closed 2021.07.22 16:55:22 LOG7[0]: Local descriptor (FD=3) closed 2021.07.22 16:55:22 LOG7[0]: Service [strato-pop3] finished (0 left) 2021.07.22 16:55:22 LOG7[0]: str_stats: 1 block(s), 32 data byte(s), 90 control byte(s) 2021.07.22 16:55:22 LOG7[0]: str_stats: 32 byte(s) at network.c:735

2 3

Equivalence of verify=2
by Yann RESCOURIO 22 Jul '21

22 Jul '21

Hello I would like to authenticate a server with only its CA file. What is the equivalence of verify=2 ? requireCert = yes verifyChain = no verifyPeer = yes Regards Yann

3 5

idea: linux stunnel mini-GUI
by Dmitry Bakshaev 13 Jul '21

13 Jul '21

we need start stunnel on linux desktop by ordinary user (like on windows): 1 click stunnel icon on system menu 2 enter user certificate password 3 use opened tunnels with users applications 4 on desktop session ends close all tunnels make XDG menu entry file: [Desktop Entry] Type=Application Name=stunnel Categories=Network; GenericName=TLS/SSL - Port Wrapper Comment[ru_RU]=Секретный туннель Icon=stunnel Exec=/usr/bin/stunnel Terminal=true X-KeepTerminal=true but only problem is how stunnel react on signals: HUP is daemon's "reload config". in X-session HUP signal is "session end" and stunnel is not exited on closing terminal or logout. attached patch change this behavior: if "foreground=yes" specified in stunnel.conf HUP signal is treated as TERM and stunnel exited. foreground=yes is "debug" or "desktop" mode of stunnel. XDG-desktop file and icon file may be included in default stunnel distributions.

1 0

Difficulty to select exact Cipher
by Sachin Deshmukh 12 Jul '21

12 Jul '21

Hello Together, I had been trying to use a stunnel to set PSK encrypted TLS. Below is my conf file. [client] client = yes accept = 127.0.0.1:8888 connect = 192.168.1.100:443 ciphers = PSK-AES128-CBC-SHA256 PSKsecrets = /data/dummy.txt I can see communication, but client e.g. Stunnel from Client side offer several other cipher in addition to exact one which is expected as per conf. I wish PSK-AES128-CBC-SHA256 (0x00ae) But I see the list below in actual communication. [image: image.png] Please let me know 1 .how we can inform stunnel to use exact and only 1 cipher provided in the conf file. Or 2. How can we state hex id instead of string. If I see a cipher list, with the same keyword as a part or whole there are more than 1 ciphers, I suppose this causes stunnel to take a list as per string match. ECDHE-PSK-AES128-CBC-SHA256 TLSv1 Kx=ECDHEPSK Au=PSK Enc=AES(128) Mac=SHA256 RSA-PSK-AES128-CBC-SHA256 TLSv1 Kx=RSAPSK Au=RSA Enc=AES(128) Mac=SHA256 DHE-PSK-AES128-CBC-SHA256 TLSv1 Kx=DHEPSK Au=PSK Enc=AES(128) Mac=SHA256 *PSK-AES128-CBC-SHA256 * TLSv1 Kx=PSK Au=PSK Enc=AES(128) Mac=SHA256 Can we make a stunnel to select only one exact cipher?

1 0

curl 7.61 exit status 8 from stunnel service of tls1
by kmx1818＠gmail.com 09 Jul '21

09 Jul '21

Hello all, For a remote tls1 web service : $ # openssl s_client -connect myremote:7002 -tls1 CONNECTED(00000004) depth=0 CN = xxx, OU = xxx, O = xxx, C = xxx verify error:num=18:self signed certificate verify return:1 depth=0 CN = xxx, OU = xxx, O = xxx, C = xxx verify return:1 --- Certificate chain ... --- Server certificate -----BEGIN CERTIFICATE----- MIIC8zCCAdsCBGCvjhEwDQYJKoZIhvcNAQEFBQAwPjEOMAwGA1UEAxMFRUZXRUIx ... QG9sNNhQW65rRVmdqy/g0cBbLKRKhmRCS+ajRIzBcO9ZmMe42TES -----END CERTIFICATE----- subject=XXX issuer=XXX --- No client certificate CA names sent --- SSL handshake has read 889 bytes and written 509 bytes --- New, TLSv1/SSLv3, Cipher is RC4-MD5 Server public key is 2048 bit Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE No ALPN negotiated SSL-Session: Protocol : TLSv1 Cipher : RC4-MD5 Session-ID: 2D9F8D8833A459C16C1D01F0C92F8EB7 Session-ID-ctx: Master-Key: 1BF68D1AAEEC291A60252ECD63C374661FBBE028FB39A75DDA29E4E3FB6FE34CFC80F875F9E16F9D7C840F185757F583 Key-Arg : None PSK identity: None PSK identity hint: None SRP username: None Start Time: 1625842735 Timeout : 7200 (sec) Verify return code: 18 (self signed certificate) --- closed $ I can test it alright with an "old" curl $ curl --version curl 7.15.4 (sparc-sun-solaris2.9) libcurl/7.15.4 OpenSSL/0.9.7g zlib/1.2.3 Protocols: tftp ftp telnet dict ldap http file https ftps Features: IPv6 Largefile NTLM SSL libz ...like this $ curl -skL https://myremote:7002/MyWebService?WSDL <?xml version="1.0" encoding="UTF-8"?> ... </soap:address> </port> </service> </definitions> I want to tls1.2-enable myremote:7002 with stunnel, and run a tls1.2 curl instead. My stunnel installation $ /opt/csw/bin/stunnel -version Initializing inetd mode configuration stunnel 5.59 on sparc-sun-solaris2.10 platform Compiled with OpenSSL 1.0.2u 20 Dec 2019 Running with OpenSSL 1.0.2o 27 Mar 2018 Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,OCSP,PSK,SNI Auth:LIBWRAP Global options: RNDbytes = 1024 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options: ciphers = HIGH:!aNULL:!SSLv2:!DH:!kDHEPSK curves = prime256v1 debug = daemon.notice logId = sequential options = NO_SSLv2 I start it with this service config: [my12] client = no accept = 7002 connect = myremote:7002 cert = /etc/opt/csw/stunnel/stunnel.crt key = /etc/opt/csw/stunnel/stunnel.key sslVersion = TLSv1.2 debug = 7 and test it with a fairly recent curl $ /opt/csw/bin/curl --version curl 7.61.0 (sparc-sun-solaris2.10) libcurl/7.61.0 OpenSSL/1.0.2o zlib/1.2.8 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) Release-Date: 2018-07-11 Protocols: dict file ftp ftps gopher http https imap imaps pop3 pop3s rtsp smb smbs smtp smtps telnet tftp Features: AsynchDNS IDN IPv6 Largefile NTLM NTLM_WB SSL libz TLS-SRP UnixSockets HTTPS-proxy PSL Metalink Alas, the recent curl call $ /opt/csw/bin/curl -skL https://myremote:7002/MyWebService?WSDL ...fails with exit status 23 In verbose mode we get * Trying 127.0.0.1... * TCP_NODELAY set * Failed to set TCP_KEEPALIVE on fd 4 * Connected to localhost (127.0.0.1) port 7002 (#0) * ALPN, offering http/1.1 * Cipher selection: ALL:!EXPORT:!EXPORT40:!EXPORT56:!aNULL:!LOW:!RC4:@STRENGTH * successfully set certificate verify locations: * CAfile: none CApath: /etc/opt/csw/ssl/certs * TLSv1.2 (OUT), TLS header, Certificate Status (22): * TLSv1.2 (OUT), TLS handshake, Client hello (1): * TLSv1.2 (IN), TLS handshake, Server hello (2): * TLSv1.2 (IN), TLS handshake, Certificate (11): * TLSv1.2 (IN), TLS handshake, Server key exchange (12): * TLSv1.2 (IN), TLS handshake, Server finished (14): * TLSv1.2 (OUT), TLS handshake, Client key exchange (16): * TLSv1.2 (OUT), TLS change cipher, Client hello (1): * TLSv1.2 (OUT), TLS handshake, Finished (20): * TLSv1.2 (IN), TLS change cipher, Client hello (1): * TLSv1.2 (IN), TLS handshake, Finished (20): * SSL connection using TLSv1.2 / ECDHE-RSA-AES256-GCM-SHA384 * ALPN, server did not agree to a protocol * Server certificate: * subject: C=TS; ST=Westfarthing; L=Hobbiton; O=Thorin and Company; OU=Burglars; CN=ahost.theshire.net; emailAddress=bilbo(a)theshire.net * start date: Jun 30 09:24:25 2021 GMT * expire date: Jun 30 09:24:25 2022 GMT * issuer: C=TS; ST=Westfarthing; L=Hobbiton; O=Thorin and Company; OU=Burglars; CN=ahost.theshire.net; emailAddress=bilbo(a)theshire.net * SSL certificate verify result: self signed certificate (18), continuing anyway. > GET /MyWebService?WSDL HTTP/1.1 > Host: localhost:7002 > User-Agent: curl/7.61.0 > Accept: */* > Warning: Binary output can mess up your terminal. Use "--output -" to tell Warning: curl to output it to your terminal anyway, or consider "--output Warning: <FILE>" to save to a file. * Failed writing body (0 != 7) * Closing connection 0 * TLSv1.2 (OUT), TLS alert, Client hello (1): $ I tried various curl flags - nothing works. In the meantime stunnel logs no errors Jul 9 16:16:45 acuapd30 stunnel: [ID 801593 daemon.notice] LOG5[18]: Service [my12] accepted connection from 127.0.0.1:39165 Jul 9 16:16:45 acuapd30 stunnel: [ID 801593 daemon.notice] LOG5[18]: s_connect: connected 10.240.28.69:7002 Jul 9 16:16:45 acuapd30 stunnel: [ID 801593 daemon.notice] LOG5[18]: Service [my12] connected remote server from xxx.yyy.zzz.www:39166 Jul 9 16:17:10 acuapd30 stunnel: [ID 801593 daemon.notice] LOG5[18]: Connection closed: 7 byte(s) sent to TLS, 116 byte(s) sent to socket What am i doing wrong!? Thanks in advance!

1 0

stunnel and rsyslog
by Yann RESCOURIO 28 Jun '21

28 Jun '21

Hello I use stunnel for rsyslog. And on the client equipment, I use also rsyslog queues for buffering in case of disconnection. But in case of reboot: * without stunnel, the buffered log messages are received on the rsyslog server * with stunnel, no buffered log messages are received on the rsyslog server On the client equipment, is it possible to refuse the local stunnel connections as long as the remote stunnel connection is down ? Regards Yann Rescourio

3 2

FIPS 140-2 & Ubuntu Pro
by Patrick Kaeding 23 Jun '21

23 Jun '21

Hi I am trying to set up stunnel with FIPS 140-2 compliance. I found some discussion of this on this mailing list from many years ago, but I'm not sure how much of that is still relevant today. I am running Ubuntu Pro 18.04, with FIPS mode (including the userspace modules: https://security-certs.docs.ubuntu.com/en/fips) If I simply `apt-get install stunnel4`, I can create a config with `fips = yes`, and when I start it up, I see this line logged: 2021.06.23 15:45:24 LOG5[ui]: FIPS mode enabled Does this mean I am all set, without needing to compile anything from source? In this message (from almost a decade ago), it sounds like this might be the validation I need: > BTW: "fips" option is only available when stunnel is built with FIPS support. FIPS mode is also clearly logged on startup https://www.stunnel.org/pipermail/stunnel-users/2012-November/003963.html Or do I need to build stunnel from scratch, using my local openssl distribution? Thanks! -- Patrick Kaeding pkaeding(a)launchdarkly.com

1 0

Number of tunnels open in Stunnel
by Moti Berger 21 Jun '21

21 Jun '21

Hi Is there a command I can run to get the current number of opened tunnels? I'm running Stunnel version 5.57. Thanks, Moti

1 0

Help needed for email client
by Ian Huysman 15 Jun '21

15 Jun '21

Hi, I just tried to configure stunnel as proxy between an email client (Outlook Express) and the email server (SMTP and IMAP). The problem is that the connection times out in the client while synchronising the IMAP folders. But I can send emails from the client. This is my relatively basic configuration: [SMTP] client = yes accept = 25 connect = smtp.office365.com:587 protocol = smtp [IMAP] client = yes accept = 143 connect = outlook.office365.com:993 protocol = imap Any help would be greatly appreciated! Regards, Ian.

3 2