- stunnel-users - stunnel.org

Stunnel in transparent mode
by Luis Monteiro 15 Jan '19

15 Jan '19

Hi fellows. I´m from Brazil and I´m trying to use Stunnel as a TLS proxy in a bed test environment. I´m using a traffic generator from Ixia (Breakingpoint). The bed test is: |-------------------| 6.0.0.1 |-------------------|9.0.0.1 9.0.0.2|--------------------|7.0.0.2 |--------------------| | Client 6.0.0.2 |>>>>>>>>>>>>| Stunnel Client|>>>>>>>>>>>>>>>>>>| Stunnel Server|>>>>>>>>>>>>>>>>>> | Server 7.0.0.2 | |-------------------| ens224 |-------------------|ens192 ens224|--------------------|ens192 |--------------------| I´m capturing the packets in all 3 points so I can see exactly what is happening. I tested without transparent proxy and worked fine. I test with transparent = source with the additional conf bellow in both Stunnel and worked fine as well. iptables -t mangle -N DIVERT iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT iptables -t mangle -A DIVERT -j MARK --set-mark 1 iptables -t mangle -A DIVERT -j ACCEPT ip rule add fwmark 1 lookup 100 ip route add local 0.0.0.0/0 dev lo table 100 echo 0 >/proc/sys/net/ipv4/conf/lo/rp_filter iptables -t nat -A PREROUTING -i ens224 -p tcp --dport 80 -j DNAT --to-destination 6.0.0.1:8080 I tested transparent = destination with several modification from the config bellow without success. No conf delivery packets with 7.0.0.2:443 on the Stunnel Client ens192 via 9.0.0.1 to be accept on Stunnel server 9.0.0.2:443. /sbin/iptables -I INPUT -i ens192 -p tcp --dport 8080 -j ACCEPT /sbin/iptables -t nat -I PREROUTING -p tcp --dport 443 \ -i ens192 -j DNAT --to-destination 9.0.0.1:443 Any help to show me what is wrong would be appreciated. Thanks in advanced, Luis Monteiro

1 0

Re: [stunnel-users] No more addresses to connect
by Eric Eberhard 14 Jan '19

14 Jan '19

Could be the versions of communication are different – from SSLv3 to TLS1.3 … Having said that, there is NO REASON to use stunnel and a VPN – both encrypt data. You only need to encrypt it once … so I’d change your software to behave differently via VPN or not. Eric From: stunnel-users [mailto:[email protected]] On Behalf Of Ben Habel Sent: Monday, January 07, 2019 7:32 PM To: stunnel-users(a)stunnel.org Subject: [stunnel-users] No more addresses to connect I am trying to implement an openvpn + stunnel vpn with a Linux host server and a windows client, i have everything connecting when alone but when I connect openvpn over Stunnel i get and error that says: 2019.01.07 21:18:50 LOG5[0]: Service [openvpn] accepted connection from 127.0.0.1:49343 <http://127.0.0.1:49343> 2019.01.07 21:19:15 LOG5[1]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2019.01.07 21:19:20 LOG5[2]: Service [openvpn] accepted connection from 127.0.0.1:49380 <http://127.0.0.1:49380> 2019.01.07 21:19:30 LOG3[2]: s_connect: s_poll_wait 74.215.118.189:1194 <http://74.215.118.189:1194> : TIMEOUTconnect exceeded 2019.01.07 21:19:30 LOG3[2]: No more addresses to connect And this error will loop until I disable the openvpn connection. Any help would be appreciated. Thanks

2 1

Re: [stunnel-users] older browsers, stunnel and privoxy
by Eric Eberhard 14 Jan '19

14 Jan '19

Sure it can. Inetd is simply a "server" and stunnel works in inetd mode or server mode. When not using inetd, stunnel does the server work. When using inetd then inetd does the server work. In both cases the actual "instance" of stunnel is the same. And inetd always works (or essentially Unix does not). It is milliseconds slower in inetd (and unless you are doing millions of connections nobody will notice) but way more reliable in my experience. Eric -----Original Message----- From: stunnel-users [mailto:[email protected]] On Behalf Of Peter Pentchev Sent: Friday, January 04, 2019 8:06 AM To: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] older browsers, stunnel and privoxy On Thu, Jan 03, 2019 at 02:45:30PM -0700, Eric Eberhard wrote: > Observation: you accept on port 80 ... the log says 4121 ... any > chance you have some sort of port forwarding/NAT/firewall/router issue? Just for the record (I already answered the question in another message), the log says that the client - the program that was talking to stunnel, presumably some kind of web browser - connected *to* stunnel *from* the (ephemeral) port 4121. > Second -- if you are on Unix why not just use inetd? Easy, reliable, > simple, always works (if inetd goes down you have no Unix). And you > have nothing to manage -- just logs to look at. The inetd and stunnel tools serve different purposes - inetd cannot, by itself, proxy between a plaintext and a TLS/SSL connection. > Happy New Year > > Eric Same! G'luck, Peter > -----Original Message----- > From: stunnel-users [mailto:[email protected]] On > Behalf Of kovacs janos > Sent: Saturday, December 29, 2018 7:37 PM > To: Javier <jamilist.stn(a)gmx.es> > Cc: stunnel-users(a)stunnel.org > Subject: Re: [stunnel-users] older browsers, stunnel and privoxy > > it still doesnt seem to work. i tried it with deviantart.com again. > configuration: > client = yes > accept = 127.0.0.1:80 > connect = 52.85.220.247:443 > verifyChain = yes > CAfile = ca-certs.pem > checkHost = *.deviantart.com > > the name after checkHost is the "Common Name" displayed when viewing the site's certificate in a browser(lock icon, view certificate). i also saved the certificate in case i would need to try the "certificate pinning" method. the connect IP is what 'get-site-ip.com' > says the IP of the website is. > > these are the logs: > Service [fbsd-www] accepted connection from 127.0.0.1:4121 > s_connect: connected 52.85.220.247:443 Service [fbsd-www] connected > remote server from 192.168.0.3:4122 > SSL_connect: 14077410: error:14077410:SSL > routines:SSL23_GET_SERVER_HELLO:sslv3 alert handshake failure > Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket > > i know i pestered everyone long enough, but i still havent been able > to connect to anything. without any verification its the same > > On 12/21/18, Javier <jamilist.stn(a)gmx.es> wrote: > > On Fri, 21 Dec 2018 13:58:35 +0200 > > Peter Pentchev <roam(a)ringlet.net> wrote: > > > >> Hm, there's no reason why stunnel would not work like that for a > >> predetermined set of hosts with known addresses. > > > > Hi, > > > > I'm just trying to avoid encouraging him on keep with his first idea > > of browsing through Stunnel, with, or without privoxy. > > > > Of course one site, one connection would work, if we forget about > > secondary issues and..., nevermind... > > > > I give up :D > > > > Regards. > > > > > > _______________________________________________ > > stunnel-users mailing list > > stunnel-users(a)stunnel.org > > https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users > > > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)stunnel.org > https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users > > > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)stunnel.org > https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users -- -- Peter Pentchev roam(a){ringlet.net,debian.org,FreeBSD.org} pp(a)storpool.com PGP key: http://people.FreeBSD.org/~roam/roam.key.asc Key fingerprint 2EE7 A7A5 17FC 124C F115 C354 651E EFB0 2527 DF13

1 0

Could stunnel encryption be responsible for rendering the year as "4019" instead of "2019"?
by Al Birchall 09 Jan '19

09 Jan '19

Hi All, This may be stupid question, but I'll pose it anyway! We use stunnel to encrypt communications between library self-service kiosks and a cloud-based library system. Since switching to this cloud-based library system, the self-service kiosks have been rendering the year in item due dates as "4019" instead of "2019" printed and emailed patron library account statements. Items will actually have been checked out to the correct due date in library system, with the year displayed correctly, which library staff and patrons can see is so when they access the system directly. We have fixed the problem with a work-around by configuring the kiosk software to only display the last two digits of the year. So could it be the stunnel encryption algorithms that are causing "2019" to display as "4019"? Many thanks! Alex Alex Birchall Library Systems Manager The Sheppard Library Middlesex University London NW4 4BT UK Tel: +44 (0)20 8411 5235 Mob: 07765 237 570

2 1

Internal Errors
by _ Ånüßås _ 08 Jan '19

08 Jan '19

Hello, I would like to report two bugs. I recently upgraded to stunnel 5.50 on FreeBSD 12.0 and noticed that the stunnel server service now crashes periodically. When checking the logs after a crash, I see the following error: INTERNAL ERROR: Dead canary at /usr/src/crypto/openssl/ssl/statem/extensions_sr The stunnel server service only ever talks to a stunnel client service, also running version 5.50 on FreeBSD 12.0. The server configuration is as follows. Anything in {} brackets has been redacted. I have seen this issue on multiple servers configured the same way. <config> client = no setuid = stunnel setgid = stunnel pid = {/path/to/file} output = {/path/to/file} debug = 4 socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [server] accept = {ip}:{port} connect = {ip}:{port} ciphers = PSK PSKsecrets = {/path/to/file} </config> Additionally, I have noticed another error in the logs. Although it appears far more frequently than the error above, it does not seem to cause the server service to crash. INTERNAL ERROR: Double free attempt: ptr=0x802119050 alloc=/usr/src/crypto/openssl/crypto/stack/stack.c:198 free#1=/usr/src/crypto/openssl/crypto/stack/stack.c:376 free#2=/usr/src/crypto/openssl/ssl/ssl_sess.c:814 Please let me know if additional information is needed to fix these bugs. Thank you.

1 0

No more addresses to connect
by Ben Habel 08 Jan '19

08 Jan '19

I am trying to implement an openvpn + stunnel vpn with a Linux host server and a windows client, i have everything connecting when alone but when I connect openvpn over Stunnel i get and error that says: 2019.01.07 21:18:50 LOG5[0]: Service [openvpn] accepted connection from 127.0.0.1:49343 2019.01.07 21:19:15 LOG5[1]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2019.01.07 21:19:20 LOG5[2]: Service [openvpn] accepted connection from 127.0.0.1:49380 2019.01.07 21:19:30 LOG3[2]: s_connect: s_poll_wait xx.xxx.xxx.xxx:1194: TIMEOUTconnect exceeded 2019.01.07 21:19:30 LOG3[2]: No more addresses to connect And this error will loop until I disable the openvpn connection. Any help would be appreciated. Thanks

2 1

Need help to confi Stunnel
by Larry Alba 08 Jan '19

08 Jan '19

I need help to configure Stunnel to work again for my Secure Email being sent by my NoteSmith software thru Aplus.net mail server. I am: larryalba(a)yahoo.com Sent from Yahoo Mail on Android

1 0

ssl3_get_record:wrong version number
by Moellers 07 Jan '19

07 Jan '19

Hello, what I´m trying to accomplish is to build a secure RDP Connection between my Laptop and a Server, which are in the same Network but as RDP in itself is not secure enough I need the stunnel encryption. As of now I can establish a connection but as soon as I try to start an RDP Connection I get the following message: SSL_accept: 1408F10B: error:1408F10B:SSL routines:ssl3_get_record:wrong version number I tried serveral things for example: sslVersion = all options = NO_SSLv2 Sadly this doesn´t work either as I get a different error after that. This is pretty much the config for both Server and Client. ; R.B. Konfiguration HMailServer InvNr. 4522 RDP Zugriff mit STunnel-Verschlüsselung [RDP-SSL] CAfile = certs.pem accept = 9000 connect = 3389 ;verify = 4 verifyPeer = yes verifyChain = no sslVersion = all cert = stunnel.pem I exchanged the certificates between the Server and the Laptop but can´t establish a connection to get a RDP Session going. Hope someone can help me. Kind regards. F.Moellers Mit freundlichen Grüßen IT-Abteilung Jugendhilfe Köln e.V. Christianstr. 82 50825 Köln Tel. (0221) 54600-177 <mailto:[email protected]> it(a)jugendhilfe-koeln.de <http://www.jugendhilfe-koeln.de> www.jugendhilfe-koeln.de Geschäftsführerin: Almut Gross - Amtsgericht Köln VR 7348 Vorstandsvorsitzende: Dr. Agnes Klein

2 1

Re: [stunnel-users] older browsers, stunnel and privoxy
by Eric Eberhard 04 Jan '19

04 Jan '19

Observation: you accept on port 80 ... the log says 4121 ... any chance you have some sort of port forwarding/NAT/firewall/router issue? Second -- if you are on Unix why not just use inetd? Easy, reliable, simple, always works (if inetd goes down you have no Unix). And you have nothing to manage -- just logs to look at. Happy New Year Eric -----Original Message----- From: stunnel-users [mailto:[email protected]] On Behalf Of kovacs janos Sent: Saturday, December 29, 2018 7:37 PM To: Javier <jamilist.stn(a)gmx.es> Cc: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] older browsers, stunnel and privoxy it still doesnt seem to work. i tried it with deviantart.com again. configuration: client = yes accept = 127.0.0.1:80 connect = 52.85.220.247:443 verifyChain = yes CAfile = ca-certs.pem checkHost = *.deviantart.com the name after checkHost is the "Common Name" displayed when viewing the site's certificate in a browser(lock icon, view certificate). i also saved the certificate in case i would need to try the "certificate pinning" method. the connect IP is what 'get-site-ip.com' says the IP of the website is. these are the logs: Service [fbsd-www] accepted connection from 127.0.0.1:4121 s_connect: connected 52.85.220.247:443 Service [fbsd-www] connected remote server from 192.168.0.3:4122 SSL_connect: 14077410: error:14077410:SSL routines:SSL23_GET_SERVER_HELLO:sslv3 alert handshake failure Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket i know i pestered everyone long enough, but i still havent been able to connect to anything. without any verification its the same On 12/21/18, Javier <jamilist.stn(a)gmx.es> wrote: > On Fri, 21 Dec 2018 13:58:35 +0200 > Peter Pentchev <roam(a)ringlet.net> wrote: > >> Hm, there's no reason why stunnel would not work like that for a >> predetermined set of hosts with known addresses. > > Hi, > > I'm just trying to avoid encouraging him on keep with his first idea > of browsing through Stunnel, with, or without privoxy. > > Of course one site, one connection would work, if we forget about > secondary issues and..., nevermind... > > I give up :D > > Regards. > > > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)stunnel.org > https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users > _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

2 1

stunnel not working properly on Redhat linux (fresh install)
by Klaus Kloeser 04 Jan '19

04 Jan '19

Hi, I have set up Stunnel as SSL Wrapper for googlemail on a Redhat Enterprise Linux 7.2 installation. The stunnel.conf: output = /var/log/stunnel.log cert = /etc/pki/tls/certs/2019stunnel.pem client = yes sslVersion = TLSv1 ;fips=no [ssmtp] accept = 1925 connect=smtp.googlemail.com:587 lets me start stunned well. I have created the file 2019stunnel.pem following the Instructions on Redhat: make 2019stunnel.pem in the correct directory (certs) now I tried to telnet localhost 1925; I get a “connected”, but nothing more. telnet smtp.googlemail 587 runs very well, I get connected, so I assume it is not a firewall issue. I checked the options sslVersion = TLSv1 and sslVersion = all alternatively, which led to different errors in stunnel.log: Service [ssmtp] accepted connection from 127.0.0.1:49723 2019.01.04 14:45:01 LOG3[4500:140416608397056]: connect_blocking: connect 2a00:1450:400c:c0c::10:587: Network is unreachable (101) 2019.01.04 14:45:01 LOG5[4500:140416608397056]: connect_blocking: connected 74.125.140.16:587 2019.01.04 14:45:01 LOG5[4500:140416608397056]: Service [ssmtp] connected remote server from 192.168.178.57:44246 2019.01.04 14:45:01 LOG3[4500:140416608397056]: SSL_connect: 140770FC: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol 2019.01.04 14:45:01 LOG5[4500:140416608397056]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2019.01.04 14:54:24 LOG5[4500:140416608249920]: Terminated or Service [ssmtp] accepted connection from 192.168.178.57:57612 2019.01.04 14:54:36 LOG5[7437:139957105055488]: connect_blocking: connected 173.194.76.16:587 2019.01.04 14:54:36 LOG5[7437:139957105055488]: Service [ssmtp] connected remote server from 192.168.178.57:52192 2019.01.04 14:54:36 LOG3[7437:139957105055488]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number 2019.01.04 14:54:36 LOG5[7437:139957105055488]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket Now Open SSL: Openssl output: openssl s_client -connect localhost:1925 CONNECTED(00000003) write:errno=104 no peer certificate available No client certificate CA names sent SSL handshake has read 0 bytes and written 289 bytes New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE No ALPN negotiated SSL-Session: Protocol : TLSv1.2 Cipher : 0000 Session-ID: Session-ID-ctx: Master-Key: Key-Arg : None Krb5 Principal: None PSK identity: None PSK identity hint: None Start Time: 1546610402 Timeout : 300 (sec) Verify return code: 0 (ok) What do I miss here; what is running wrong ? Mit freundlichen Grüßen/ best regards Klaus Klöser

2 1