On Sun, Jan 13, 2019 at 07:41:31PM -0700, Eric Eberhard wrote:

Could be the versions of communication are different – from SSLv3 to TLS1.3 …

The error message says that it cannot establish a TCP connection; this is way, way, WAY earlier than negotiating the SSL versions.

Having said that, there is NO REASON to use stunnel and a VPN – both encrypt data. You only need to encrypt it once …

This part is true - Ben, why do you want to run OpenVPN over stunnel?

so I’d change your software to behave differently via VPN or not.

I'm not sure I quite understood what that part meant :)

G'luck, Peter

From: stunnel-users [mailto:[email protected]] On Behalf Of Ben Habel Sent: Monday, January 07, 2019 7:32 PM To: [email protected] Subject: [stunnel-users] No more addresses to connect

I am trying to implement an openvpn + stunnel vpn with a Linux host server and a windows client, i have everything connecting when alone but when I connect openvpn over Stunnel i get and error that says:

2019.01.07 21:18:50 LOG5[0]: Service [openvpn] accepted connection from 127.0.0.1:49343 http://127.0.0.1:49343

2019.01.07 21:19:15 LOG5[1]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket

2019.01.07 21:19:20 LOG5[2]: Service [openvpn] accepted connection from 127.0.0.1:49380 http://127.0.0.1:49380

2019.01.07 21:19:30 LOG3[2]: s_connect: s_poll_wait 74.215.118.189:1194 http://74.215.118.189:1194 : TIMEOUTconnect exceeded

2019.01.07 21:19:30 LOG3[2]: No more addresses to connect

And this error will loop until I disable the openvpn connection.

Any help would be appreciated.

Thanks

---

stunnel-users mailing list [email protected] https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users