Hello, I have a little problem, working with stunnel.

The problem is:

25 10:50:53 LOG3[2612:1972]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number

and the full log:

25 10:50:32 LOG7[2612:2988]: No limit detected for the number of clients 2012.10.25 10:50:32 LOG5[2612:2988]: stunnel 4.53 on x86-pc-mingw32-gnu platform 2012.10.25 10:50:32 LOG5[2612:2988]: Compiled/running with OpenSSL 0.9.8s-fips 4 Jan 2012 2012.10.25 10:50:32 LOG5[2612:2988]: Threading:WIN32 SSL:+ENGINE+OCSP+FIPS Auth:none Sockets:SELECT+IPv6 2012.10.25 10:50:32 LOG5[2612:2988]: Reading configuration from file stunnel.conf 2012.10.25 10:50:33 LOG5[2612:2988]: FIPS mode is enabled 2012.10.25 10:50:33 LOG7[2612:2988]: Compression not enabled 2012.10.25 10:50:33 LOG7[2612:2988]: PRNG seeded successfully 2012.10.25 10:50:33 LOG6[2612:2988]: Initializing service section [POS] 2012.10.25 10:50:33 LOG7[2612:2988]: Certificate: C:\Arcus2\SSL\pos3135pem.pem 2012.10.25 10:50:33 LOG7[2612:2988]: Certificate loaded 2012.10.25 10:50:33 LOG7[2612:2988]: Key file: C:\Arcus2\SSL\pos3135key.pem 2012.10.25 10:50:33 LOG7[2612:2988]: Private key loaded 2012.10.25 10:50:33 LOG7[2612:2988]: SSL options set: 0x00000004 2012.10.25 10:50:33 LOG5[2612:2988]: Configuration successful 2012.10.25 10:50:33 LOG7[2612:2988]: Service [POS] (FD=180) bound to 127.0.0.1:9021 2012.10.25 10:50:53 LOG7[2612:2988]: Service [POS] accepted (FD=260) from 127.0.0.1:3645 2012.10.25 10:50:53 LOG7[2612:2988]: Creating a new thread 2012.10.25 10:50:53 LOG7[2612:2988]: New thread created 2012.10.25 10:50:53 LOG7[2612:1972]: Service [POS] started 2012.10.25 10:50:53 LOG5[2612:1972]: Service [POS] accepted connection from 127.0.0.1:3645 2012.10.25 10:50:53 LOG6[2612:1972]: connect_blocking: connecting 217.69.205.63:9021 2012.10.25 10:50:53 LOG7[2612:1972]: connect_blocking: s_poll_wait 217.69.205.63:9021: waiting 10 seconds 2012.10.25 10:50:53 LOG5[2612:1972]: connect_blocking: connected 217.69.205.63:9021 2012.10.25 10:50:53 LOG5[2612:1972]: Service [POS] connected remote server from 213.156.128.147:3646 2012.10.25 10:50:53 LOG7[2612:1972]: Remote socket (FD=284) initialized 2012.10.25 10:50:53 LOG3[2612:1972]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number 2012.10.25 10:50:53 LOG5[2612:1972]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2012.10.25 10:50:53 LOG7[2612:1972]: Remote socket (FD=284) closed 2012.10.25 10:50:53 LOG7[2612:1972]: Local socket (FD=260) closed 2012.10.25 10:50:53 LOG7[2612:1972]: Service [POS] finished (0 left)

my .conf file is:

cert = C:\Arcus2\SSL\pos3135pem.pem key = C:\Arcus2\SSL\pos3135key.pem socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 CAfile = C:\Arcus2\SSL\cacert.pem debug = 7 output = stunnel.log [POS] client = yes accept = 127.0.0.1:9021 connect = xxx.xxx.xxx.xxx:9021

if I change conf file, adding sslVersion = all or sslVersion = SSLv3, I have another error

Section POS: sslVersion = TLSv1 is required in FIPS mode

Thank your for help, Sergey Pimenov