:-)

Thanks!

I was not including the blocks: []

After including the blocks: [] it works.

Thank You.

Just configure as many "service" block as accept/connect pair you need. [service1] ... [service2] ... Pierre Delaage

Quoting Noel Sanchez [email protected]:

...

I have had a working stunnel conf for much time, very happy with it.

[stunnel] accept = 0.0.0.0:30000 connect = 192.168.27.102:8000

I have stunnel listening on port 30000 and then sending to 192.168.27.102 on port 8000. Works good.

I now want to add more listening ports to stunnel, like so:

[stunnel] accept = 0.0.0.0:30000 connect = 192.168.27.102:8000 accept = 0.0.0.0:30006 connect = 192.168.27.102:8006

When I do this, stunnel only binds to 30006, per my log file: stunnel bound to 0.0.0.0:30006

And when I do a netstat -vatn: tcp 0 0 0.0.0.0:30006 0.0.0.0:* LISTEN

It is not listening on port 30000 anymore. I'd like to accepts connections on many different ports, then send accordingly. Can I do this? Why does stunnel only listen to one port when I add more accept lines in its config?

Noel

---

stunnel-users mailing list [email protected] http://stunnel.mirt.net/mailman/listinfo/stunnel-users