Hello,
I have been working on an issue that seems a lot like this one: https://www.stunnel.org/pipermail/stunnel-users/2011-January/002898.html
We are running stunnel 5.56 and it has been working with no issues until November. Since November there have been 6 short 5-15 minute outages where we see network traffic between client and server in the packet captures, but stunnel logs stop during this period. Everything recovers on its own after this brief outage. I am looking for help in what to look for to explain this.
Feb 2 14:49:29 *host* stunnel: LOG5[22565874]: Connection closed: 83 byte(s) sent to TLS, 74 byte(s) sent to socket Feb 2 15:00:36 *host* stunnel: LOG6[2705685]: Peer certificate not required
We usually see dozens of messages every second, so to have an 11 minute gap in the logs is unusual.
Any help would be appreciated, thank you.
I second your problem! We are experiencing what sounds like the same issue. We have had 8 outages since November. They come in pairs, roughly 48 hours apart. Each outage is between 10-12 minutes, then self resolves.
I literally just came to this thread tonight while troubleshooting the latest outage.
Did the suggestion in the thread work for you?
We haven't taken any actions yet. We have so far believed that it was a network side issue, so we have been looking hard at the network devices and getting vendor cases open. We have been looking at packet captures to see if we can figure it out. We haven't found anything that points to the network, but still looking at that. Do you happen to have any load balancers in front of stunnel?
I plan to recommend some changes to stunnel suggested in this thread.
Thanks, and sorry you are facing this same issue.
On Fri, Feb 4, 2022 at 11:36 PM [email protected] wrote:
I second your problem! We are experiencing what sounds like the same issue. We have had 8 outages since November. They come in pairs, roughly 48 hours apart. Each outage is between 10-12 minutes, then self resolves.
I literally just came to this thread tonight while troubleshooting the latest outage.
Did the suggestion in the thread work for you? _______________________________________________ stunnel-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
-
john.robertson.arnold＠gmail.com -
Steve Clement