Hello I would like to authenticate a server with only its CA file. What is the equivalence of verify=2 ? requireCert = yes verifyChain = no verifyPeer = yes Regards Yann
Hello,
I am facing the below difficulties while using a stunnel for CA File as TLS Server. -- TLS Server running in Windows -- Use of CA File -- Cipher use from client is: -- ciphers = ECDHE-ECDSA-AES256-GCM-SHA384
21.07.20 23:38:32 LOG7[11]: Decrypt session ticket callback 2021.07.20 23:38:32 LOG7[11]: Initializing application specific data for session authenticated 2021.07.20 23:38:32 LOG7[11]: SNI: no virtual services defined 2021.07.20 23:38:32 LOG7[11]: TLS alert (write): fatal: handshake failure 2021.07.20 23:38:32 LOG3[11]: SSL_accept: ssl/statem/statem_srvr.c:2283: error:1417A0C1:SSL routines:tls_post_process_client_hello:no shared cipher 2021.07.20 23:38:32 LOG5[11]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2021.07.20 23:38:32 LOG7[11]: Deallocating application specific data for session connect address 2021.07.20 23:38:32 LOG7[11]: Local descriptor (FD=1000) closed 2021.07.20 23:38:32 LOG7[11]: Service [Server] finished (0 left)
If this cipher is removed, this validation is passed. Is this cipher not supported? Stunnel version is 5.59. Even if verifypeer is disabled, there is no gain.
Conf file: [Server] accept = 443 connect = 8888 sslVersion = TLSv1.2 ciphers = ECDHE-ECDSA-AES256-GCM-SHA384 verifyChain = no ;verifyPeer = no ;verify = 1 CAfile = xyz.crt cert = xyz.crt key = key.pem options = NO_SSLv2 options = NO_SSLv3 debug = 7
I would like to authenticate a server with only its CA file. What is the equivalence of verify=2 ?
requireCert = yes
verifyChain = no
verifyPeer = yes
Regards
Yann
Hi! Take a look at this cheat sheet:
no veryfy <=> requestCert=no & requireCert=no & verifyChain=no & verifyPeer=no verify=0 <=> requestCert=yes & requireCert=no & verifyChain=no & verifyPeer=no verify=1 <=> requestCert=yes & requireCert=no & verifyChain= yes & verifyPeer=no verify=2 <=> requestCert=yes & requireCert=yes & verifyChain= yes & verifyPeer=no verify=3 <=> requestCert=yes & requireCert=yes & verifyChain= yes & verifyPeer=yes verify=4 <=> requestCert=yes & requireCert=yes & verifyChain= no & verifyPeer=yes
Regards, Małgorzata
W dniu 21.07.2021 o 09:07, Sachin Deshmukh pisze:
I am facing the below difficulties while using a stunnel for CA File as TLS Server. -- TLS Server running in Windows -- Use of CA File -- Cipher use from client is: -- ciphers = ECDHE-ECDSA-AES256-GCM-SHA384
2021.07.20 23:38:32 LOG7[11]: TLS alert (write): fatal: handshake failure 2021.07.20 23:38:32 LOG3[11]: SSL_accept: ssl/statem/statem_srvr.c:2283: error:1417A0C1:SSL routines:tls_post_process_client_hello:no shared cipher
If this cipher is removed, this validation is passed. Is this cipher not supported? Stunnel version is 5.59. Even if verifypeer is disabled, there is no gain.
Hi Sachin, Cipher suites using ECDSA for authentication (such as ECDHE-ECDSA-AES256-GCM-SHA384) require ECDSA-based certificates. Commonly used certificates are based on RSA rather than ECDSA.
Regards, Małgorzata
Hello Thanks for your help Where is described the requestCert parameter ? Not found on the webpage https://www.stunnel.org/static/stunnel.html Regards Yann
Message du 21/07/21 10:05> De : "Małgorzata Olszówka via stunnel-users" > A : [email protected]> Copie à : > Objet : [stunnel-users] Re: Equivalence of verify=2> > > I would like to authenticate a server with only its CA file. What is the > > equivalence of verify=2 ?> > > > requireCert = yes> > > > verifyChain = no> > > > verifyPeer = yes> > > > Regards> > > > Yann> > > > Hi!> Take a look at this cheat sheet:> > no veryfy <=> requestCert=no & requireCert=no & verifyChain=no & > verifyPeer=no> verify=0 <=> requestCert=yes & requireCert=no & verifyChain=no & > verifyPeer=no> verify=1 <=> requestCert=yes & requireCert=no & verifyChain= yes & > verifyPeer=no> verify=2 <=> requestCert=yes & requireCert=yes & verifyChain= yes & > verifyPeer=no> verify=3 <=> requestCert=yes & requireCert=yes & verifyChain= yes & > verifyPeer=yes> verify=4 <=> requestCert=yes & requireCert=yes & verifyChain= no & > verifyPeer=yes> > > Regards,> Małgorzata> _______________________________________________ stunnel-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
W dniu 22.07.2021 o 08:59, Yann RESCOURIO pisze:
Hello
Thanks for your help
Where is described the requestCert parameter ?
Not found on the webpage https://www.stunnel.org/static/stunnel.html
Hi, There is no requestCert option, but that simply highlights the difference between *no verify* and *verify = 0* option in my cheat sheet.
Regards, Małgorzata
-
Małgorzata Olszówka -
Sachin Deshmukh -
Yann RESCOURIO