P.s.
From: "Phil Smith III" [email protected] Date: Wed, 17 Jan 2018 21:59:42 -0500
protocol = pop3
The stunnel(8) manual has this. "protocol = PROTO application protocol to negotiate TLS This option enables initial, protocol-specific negotiation of the TLS encryption."
Is there any need for protocol-specific negotiation? Why? Stunnel provides a tunnel and POP3 works inside. That's all. Try the configuration without the protocol option.
Regards, ... Peter E.
Some protocols use a protocol-specific command to begin TLS negotiation (STARTTLS for SMTP and POP3), so stunnel needs to know how (and be told) to use that command.
However, I believe you only need to do this if using TLS on a POP3 connection on port 110. POP3S on port 995 should implicitly use TLS.
*Andrew Culver* System Engineer Western Technology Services https://wts.uwo.ca University of Western Ontario https://www.uwo.ca e: [email protected] p: 519-661-2111 x80265 <15196612111,80265> cal: html http://goo.gl/wVoDlo | ics http://goo.gl/ncUjV0
On Thu, Jan 18, 2018 at 9:51 AM, [email protected] wrote:
P.s.
From: "Phil Smith III" [email protected] Date: Wed, 17 Jan 2018 21:59:42 -0500
protocol = pop3
The stunnel(8) manual has this. "protocol = PROTO application protocol to negotiate TLS This option enables initial, protocol-specific negotiation of the TLS encryption."
Is there any need for protocol-specific negotiation? Why? Stunnel provides a tunnel and POP3 works inside. That's all. Try the configuration without the protocol option.
Regards, ... Peter E.
--
123456789 123456789 123456789 123456789 123456789 123456789 123456789 Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757 http://easthope.ca/Peter.html Bcc: peter at easthope. ca
stunnel-users mailing list [email protected] https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users
-
Andrew Culver -
peter＠easthope.ca