stunnel-users

3306 discussions

exclusively TLS
by Richard Kotal 17 Jul '06

17 Jul '06

Hey, I had the same problem. I solved this problem. You must download my patch: http://www.aolserver.cz/, or http://www.aolserver.cz/download/stunnel-4.15_patch.tgz Richard Kotal info(a)waplikace.cz www.aolserver.cz prepis.waplikace.cz www.nvp.cz /> I need to talk to a server that is requiring pure TLS. It seems that > STUNNEL always starts with SSL. How do I get STUNNEL to start the client //> //side conversation with TLS? //> / /> // //> //John Moehrke //> //Enterprise Security Architect //> //GE Healthcare //> //T 262 293 1667 //> //W126 N7449 Flint Road, Suite 200, Menomonee Falls, WI 53051 //> / <http://stunnel.mirt.net/mailman/listinfo/stunnel-users>/John.Moehrke at med.ge.com <http://stunnel.mirt.net/mailman/listinfo/stunnel-users> <mailto:John.Moehrke at med.ge.com <http://stunnel.mirt.net/mailman/listinfo/stunnel-users>> //> //www.gehealthcare.com <http://www.gehealthcare.com/> //> //What I may see or hear in the course of the treatment or even outside of //> //the treatment in regard to the life of men, which on no account one must //> //spread abroad, I will keep to myself, holding such things shameful to be //> //spoken about. (One Portion of the Hippocratic Oath - Hippocrates, circa //> //400 B.C.) /

1 0

configure/compile issue on AIX
by Boxall, John 13 Jul '06

13 Jul '06

I'm trying to get stunnel working on AIX 5.3. I'm running the configure with "--prefix=/opt/freeware", however, when I start stunnel it is looking for the stunnel.conf file in /usr/local/etc/stunnel. Shouldn't it be looking for it in "/opt/freeware/etc/stunnel", which is where the "make install" put it? Regards, John Boxall

3 4

newbie: stunnel works but do not encrypt
by Gallas Róbert 13 Jul '06

13 Jul '06

Hello, I setup stunnel( v4.15 win32 port ) on both side, client and server. Connection is working but does not encrypt. Setup is done for ORACLE and WEB. Oracle`s listener is setup with "USE_SHARED_SOCKET = TRUE" variable and works fine with OpenSSH with PUTTY I use default configuration just with the needed basic customization: # ##Client cert = stunnel.pem socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = stunnel.log client = yes [web] accept = 3128 connect = 10.160.1.220:3128 [oracle] accept = 1521 connect = 10.160.1.220:4892 ### Server: cert = stunnel.pem socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [web] accept = 3128 connect = 10.160.0.4:3128 [oracle] accept = 4892 connect = 10.160.1.220:1521 Any good sugestions? Thanks for your answers Regards Robert

2 4

(no subject)
by Gallas Róbert 12 Jul '06

12 Jul '06

1 0

Follow-up: Bad certificate? (was Expired certificate?)
by Boxall, John 11 Jul '06

11 Jul '06

Mike, et al, The problem I was having with stunnel on a Windows box connecting with stunnel on a Unix server (Solaris in this case) turned out to be a mis-configuration of the syslog-ng server on Unix. I took a sample syslog-ng.conf from somewhere else and didn't know the impact of "max-connections(1)". Though I assume it is intended as a limit on the number of connections to the localhost (127.0.0.1:514), it effectively limits the number of in-bound connections from remote logging clients to 1 (in this case using port 5140). Removing this parameter allowed all of my test clients to simultaneously log to the server. Mike, the OpenSSL-generated cert works fine. Thanks. Regards, John Boxall

1 0

libssl.so.0.9.8 error running stunnel
by Michael Tyrrell 10 Jul '06

10 Jul '06

I have a Solaris 10 SPARC server running stunnel 4.15 with openssl version "OpenSSL 0.9.8b 04 May 2006". When I try to run /usr/local/sbin/stunnel I get the following error. ld.so.1: stunnel: fatal: libssl.so.0.9.8: open failed: No such file or directory Killed In the stunnel.conf file I have debug set to 7 but it will not write to the stunnel.log file. I also get the same error if I run stunnel -version. Thanks for any help you could give.

2 1

stunnel and gmail (Windows)
by Al Oomens 08 Jul '06

08 Jul '06

I've gotten an older version of stunnel to work the way I want by starting it from a command prompt like: stunnel -c -d 110 -r pop.gmail.com:995 How do I specify this in the config file for the newest version of stunnel, in order to use it as a service on Windows? -- Al Oomens Wheaton, IL. aloomens(a)gmail.com

2 1

Wildcard outbound IP matching...
by Jeff Roberts 07 Jul '06

07 Jul '06

Is there a way to configure Stunnel to capture outbound packets for *any* IP, but for a specific port? My SMTP server can be configured to connect directly to the final SMTP server. I can configure the outbound port to some other port other than 25, so I'd like to say something like - [smtpclient] protocol=smtp accept = *:2210 connect = *:25 Suggestions? ->Jeff RAD Game Tools

2 1

Bad certificate? (was Expired certificate?)
by Boxall, John 30 Jun '06

30 Jun '06

Mike, I've created a self-signed certificate on my Windows test box using OpenSSL 0.9.7j (the version from Shining Light). I created the key file with the following command: "openssl genrsa 1024 > \host.key Here is the command I used to create the self-signed cert: "openssl req -new -x509 -nodes -sha1 -days 9999 -key \host.key > \host.cert" I then copied the key/cert to the appropriate file in the stunnel directory. I then copied the cert to the Solaris server and included it with all other client certs. Here is the Windows configuration file: ; ;CLIENT-ONLY stunnel configuration file ; client = yes cert = C:\Program Files\stunnel\stunnel.pem-client-certificate CAfile = C:\Program Files\stunnel\stunnel.pem-server-certificate ;chroot = /var/run/stunnel ;pid = /usr/local/var/run/stunnel/stunnel.pid ;setuid = stunnel ;setgid = stunnel verify = 3 ;foreground = yes debug = 7 output = C:\Program Files\stunnel\stunnel.log [5140] accept = 127.0.0.1:514 connect = 172.17.99.143:5140 Here is the Solaris configuration file: ; ;SERVER-ONLY stunnel configuration file ; cert = /usr/local/etc/stunnel/stunnel.pem-server-certificate CAfile = /usr/local/etc/stunnel/stunnel.pem-all-client-certificates ;chroot = /var/run/stunnel ;pid = /var/run/stunnel/run/stunnel.pid ;setuid = stunnel ;setgid = stunnel verify = 3 ;foreground = yes debug = 7 output=/stunnel.log [5140] accept = 172.17.99.143:5140 connect = 127.0.0.1:514 The following happens on the Windows box when I first launch stunnel: 2006.06.30 09:51:31 LOG5[516:360]: stunnel 4.15 on x86-pc-mingw32-gnu with OpenSSL 0.9.7i 14 Oct 2005 2006.06.30 09:51:31 LOG5[516:360]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2006.06.30 09:51:31 LOG5[516:392]: No limit detected for the number of clients 2006.06.30 09:51:31 LOG7[516:392]: FD 1904 in non-blocking mode 2006.06.30 09:51:31 LOG7[516:392]: SO_REUSEADDR option set on accept socket 2006.06.30 09:51:31 LOG7[516:392]: 5140 bound to 127.0.0.1:514 Nothing happens on the Solaris box. When I start EventReporter, the following happens, in a continuous loop (until I stop EventReporter): 2006.06.30 10:16:26 LOG7[296:700]: 5140 accepted FD=156 from 127.0.0.1:1154 2006.06.30 10:16:26 LOG7[296:700]: Creating a new thread 2006.06.30 10:16:26 LOG7[296:700]: New thread created 2006.06.30 10:16:27 LOG7[296:1204]: 5140 started 2006.06.30 10:16:27 LOG7[296:1204]: FD 156 in non-blocking mode 2006.06.30 10:16:27 LOG5[296:1204]: 5140 connected from 127.0.0.1:1154 2006.06.30 10:16:27 LOG7[296:1204]: FD 188 in non-blocking mode 2006.06.30 10:16:27 LOG7[296:1204]: 5140 connecting 172.17.99.143:5140 2006.06.30 10:16:27 LOG7[296:1204]: connect_wait: waiting 10 seconds 2006.06.30 10:16:27 LOG7[296:1204]: connect_wait: connected 2006.06.30 10:16:27 LOG7[296:1204]: Remote FD=188 initialized 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): before/connect initialization 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 write client hello A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 read server hello A 2006.06.30 10:16:27 LOG5[296:1204]: VERIFY OK: depth=0, /C=CA/ST=ONTARIO/L=TORONTO/O=BANK OF MONTREAL/OU=LMG-DTS/CN=jdb2u10 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 read server certificate A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 read server certificate request A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 read server done A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 write client certificate A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 write client key exchange A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 write certificate verify A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 write change cipher spec A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 write finished A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 flush data 2006.06.30 10:16:27 LOG3[296:1204]: SSL_connect: Peer suddenly disconnected 2006.06.30 10:16:27 LOG5[296:1204]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.06.30 10:16:27 LOG7[296:1204]: 5140 finished (0 left) On the Solaris box, here is the matching entry, also in a continuous loop: 2006.06.30 10:16:47 LOG7[1214:1]: 5140 accepted FD=2 from 172.17.99.150:1155 2006.06.30 10:16:47 LOG7[1214:800]: 5140 started 2006.06.30 10:16:47 LOG7[1214:800]: FD 2 in non-blocking mode 2006.06.30 10:16:47 LOG5[1214:800]: 5140 connected from 172.17.99.150:1155 2006.06.30 10:16:47 LOG7[1214:800]: SSL state (accept): before/accept initialization 2006.06.30 10:16:47 LOG7[1214:800]: SSL state (accept): SSLv3 read client hello A 2006.06.30 10:16:47 LOG7[1214:800]: SSL state (accept): SSLv3 write server hello A 2006.06.30 10:16:47 LOG7[1214:800]: SSL state (accept): SSLv3 write certificate A 2006.06.30 10:16:47 LOG7[1214:800]: SSL state (accept): SSLv3 write certificate request A 2006.06.30 10:16:47 LOG7[1214:800]: SSL state (accept): SSLv3 flush data 2006.06.30 10:16:48 LOG4[1214:800]: VERIFY ERROR: depth=0, error=self signed certificate: /C=CA/ST=ONTARIO/L=TORONTO/O=BMO/OU=LMG-DTS/CN=jdb1winxp 2006.06.30 10:16:48 LOG7[1214:800]: SSL alert (write): fatal: bad certificate 2006.06.30 10:16:48 LOG3[1214:800]: SSL_accept: 140890B2: error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned 2006.06.30 10:16:48 LOG5[1214:800]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.06.30 10:16:48 LOG7[1214:800]: 5140 finished (1 left) It appears the server cert is ok, but "something" is wrong with the client (Windows box) cert. Any chance you could post the command used in the "make install" to kick off the creation of the self-signed cert on Unix? I grep'd for it, but couldn't find it. Regards, John Boxall

1 0

Stunnel 4.15 cannot handle PKCS8 format private keys
by David Gillingham 29 Jun '06

29 Jun '06

In modifying stunnel to work with the OpenSSL FIPS-certified module, I found out that private keys cannot be in the default OpenSSL format; they must be in PKCS8 format (due to the MD5 algorithm being disabled in FIPS mode). Talking to Dr. Henson of the OpenSSL group I was able to convert my private keys from the default format to PKCS8, but I found that stunnel was not able to handle these keys. I got the following error output (note that server.pem contains a PKCS8 private key and a PKCS7 public cert): 2006.06.08 17:49:38 LOG7[1120:616]: Certificate: server.pem 2006.06.08 17:49:38 LOG7[1120:616]: Key file: server.pem 2006.06.08 17:49:42 LOG3[1120:616]: error stack: 140B3009 : error:140B3009:SSL routines:SSL_CTX_use_RSAPrivateKey_file:PEM lib 2006.06.08 17:49:42 LOG3[1120:616]: error stack: 906700D : error:0906700D:PEM routines:PEM_ASN1_read_bio:ASN1 lib 2006.06.08 17:49:42 LOG3[1120:616]: error stack: 2306A075 : error:2306A075:PKCS12 routines:PKCS12_DECRYPT_D2I:pkcs12 pbe crypt error 2006.06.08 17:49:42 LOG3[1120:616]: error stack: 23077073 : error:23077073:PKCS12 routines:PKCS12_pbe_crypt:pkcs12 algor cipherinit error 2006.06.08 17:49:42 LOG3[1120:616]: SSL_CTX_use_RSAPrivateKey_file: 6074079: error:06074079:digital envelope routines:EVP_PBE_CipherInit:unknown pbe algorithm 2006.06.08 17:49:42 LOG3[1120:616]: Server is down Continuing with Dr. Henson, he informed me that this ssl error output meant that "the PBE table has not been initialized in the application". I corrected this by adding a call to OpenSSL_add_all_algorithms() into ssl_init() in ssl.c. This fixed my error with the PEM files. I am posting this so that this bug may be fixed for the next stunnel release. Additionally, I'd like verification that my fix makes sense given the structure of the stunnel code. From doing some searches in the stunnel source, I could not find any existing code that initialized the PBE table so adding the call to ssl_init() made sense _to me_. Michal: do you agree?

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users