- stunnel-users - stunnel.org

stunnel started to core dump
by itdo＠cndag.onmicrosoft.com 07 Jun '22

07 Jun '22

Hello all About half a year ago, we started using stunnel on Solaris to secure NFS. The latest available pkg was 5.59 at that time. After a couple of months, stunnel started to core dump on several systems. We updated to the then latest version 5.63. It took again some time until core dumps occurred with 5.63 (still same stack traces). I am aware, that in the meantime 5.64 is out. We are in the process of updating it but it will take some time. Could you please have a look at the below mdb output and tell me if you need any further information to find the root cause? # mdb core.stunnel.339.60001 Loading modules: [ libc.so.1 ld.so.1 ] > ::status debugging core file of stunnel (32-bit) from xxxxxxx file: /opt/csw/bin/stunnel initial argv: /opt/csw/bin/stunnel /etc/opt/csw/stunnel/stunnel.conf start threading model: multi-threaded status: process terminated by SIGSEGV (Segmentation Fault) > $c libssl.so.1.0.0`freelist_extract+0x57(0, 2000000, 14, 42e4db16, 9bd6f8a0, eaf57a5d) > $q In the other dumps, libssl was involved as well. This is the stunnel config: setuid = nobody setgid = nogroup debug = info output = /var/adm/stunnel syslog = no options = NO_SSLv2 options = NO_SSLv3 options = NO_TLSv1 sslVersion=TLSv1.2 renegotiation=no options = SINGLE_ECDH_USE options = SINGLE_DH_USE ciphers = aes192-ctr:aes256-ctr socket = a:TCP_NODELAY=1 socket = a:SO_KEEPALIVE=1 TIMEOUTidle = 300 pid = /tmp/stunnel.pid ;include = /etc/opt/csw/stunnel/conf.d [tls-nfs-srv] accept = 31039 connect = localhost:2049 ciphers = PSK PSKsecrets = /etc/opt/csw/stunnel/psk-s.keys libwrap = yes [tls-nfs-client-1] client = yes accept = localhost:31701 connect = yyyyyy:31039 ciphers = PSK PSKsecrets = /etc/opt/csw/stunnel/psk-c.key libwrap = yes ; vim:ft=dosini Kind regards Sasha This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager.

1 0

stunnel log
by Phillip Parker 29 May '22

29 May '22

I just installed the latest version of stunnel (5.64) but there is no log file. Log file is enabled in .conf but when I run a program I don't get any log output. Help

1 0

recent Problem sending email via Blat
by Phillip Parker 25 May '22

25 May '22

I have been using stunnel and Blat for several years to send emails. Recently all the emails stopped. Interestingly I also use PowerShell to send emails and they all stopped as well. That would seem to point to something external but I have no clue what that might be. I have searched the web and have found several posts talking about (Error: Not a Socket) from Blat log but I have been unable to find a solution. In any event for stunnel I have added below the config file and the log file with debug = 7 enabled and a screen shot of netstat -an. I also believe I am running the latest version of Stunnel and Blat. Just for additional info I have attached my powershell program and the resultant error. Any help on this issue would be greatly appreciated. Incidentally I am not a stunnel or Blat person I just want things to work like they were. ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration sslversion = all ;[Protocol] protocol = smtp [ssmtp] accept = 127.0.0.1:25 connect = smtp.live.com:587 =============================================== 2022.05.21 15:03:04 LOG5[5916:5920]: Reading configuration from file stunnel.conf 2022.05.21 15:03:04 LOG7[5916:5920]: PRNG seeded successfully 2022.05.21 15:03:05 LOG7[5916:5920]: SSL context initialized for service ssmtp 2022.05.21 15:03:05 LOG5[5916:5920]: Configuration successful 2022.05.21 15:03:05 LOG5[5916:5920]: No limit detected for the number of clients 2022.05.21 15:03:05 LOG7[5916:5920]: accept socket: FD=700 allocated (non-blocking mode) 2022.05.21 15:03:05 LOG7[5916:5920]: Option SO_REUSEADDR set on accept socket 2022.05.21 15:03:05 LOG7[5916:5920]: Service ssmtp bound to 127.0.0.1:25 2022.05.21 15:03:05 LOG7[5916:5920]: Service ssmtp opened FD=700 2022.05.21 15:03:05 LOG5[5916:5920]: stunnel 4.36 on x86-pc-mingw32-gnu with OpenSSL 1.0.0d 8 Feb 2 2022.05.21 15:03:05 LOG5[5916:5920]: Threading:WIN32 SSL:ENGINE Auth:none Sockets:SELECT, IPv6 2022.05.21 15:39:56 LOG7[5916:7748]: local socket: FD=692 allocated (non-blocking mode) 2022.05.21 15:39:56 LOG7[5916:7748]: Service ssmtp accepted FD=692 from 127.0.0.1:62680 2022.05.21 15:39:56 LOG7[5916:7748]: Creating a new thread 2022.05.21 15:39:56 LOG7[5916:7748]: New thread created 2022.05.21 15:39:56 LOG7[5916:11272]: Service ssmtp started 2022.05.21 15:39:56 LOG7[5916:11272]: Option TCP_NODELAY set on local socket 2022.05.21 15:39:56 LOG5[5916:11272]: Service ssmtp accepted connection from 127.0.0.1:62680 2022.05.21 15:39:56 LOG7[5916:11272]: remote socket: FD=740 allocated (non-blocking mode) 2022.05.21 15:39:56 LOG6[5916:11272]: connect_blocking: connecting 204.79.197.212:587 2022.05.21 15:39:56 LOG7[5916:11272]: connect_blocking: s_poll_wait 204.79.197.212:587: waiting 10 seconds 2022.05.21 15:40:06 LOG3[5916:11272]: connect_blocking: s_poll_wait 204.79.197.212:587: TIMEOUTconnect exceeded 2022.05.21 15:40:06 LOG5[5916:11272]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket Partial screen shot of netstat -an TCP 127.0.0.1:25 0.0.0.0:0 LISTENING TCP 127.0.0.1:4444 0.0.0.0:0 LISTENING TCP 127.0.0.1:5354 0.0.0.0:0 LISTENING TCP 127.0.0.1:5354 127.0.0.1:53941 ESTABLISHED TCP 127.0.0.1:5354 127.0.0.1:58943 ESTABLISHED TCP 127.0.0.1:8884 0.0.0.0:0 LISTENING TCP 127.0.0.1:9012 0.0.0.0:0 LISTENING TCP 127.0.0.1:27015 0.0.0.0:0 LISTENING TCP 127.0.0.1:33555 0.0.0.0:0 LISTENING TCP 127.0.0.1:42424 0.0.0.0:0 LISTENING TCP 127.0.0.1:53941 127.0.0.1:5354 ESTABLISHED TCP 127.0.0.1:58943 127.0.0.1:5354 ESTABLISHED TCP 127.0.0.1:60485 0.0.0.0:0 LISTENING TCP 127.0.0.1:60961 0.0.0.0:0 LISTENING TCP 127.0.0.1:62433 0.0.0.0:0 LISTENING 2022.05.21 15:40:06 LOG7[5916:11272]: Service ssmtp finished (0 left) 2022.05.21 15:40:06 LOG7[5916:11272]: str_stats: 0 blocks, 0 bytes Blat Log 2022.05.21 15:39:56 (Sat)------------Start of Session----------------- Blat v3.2.19 (build : Nov 18 2017 03:14:35) 32-bit Windows, Full, Unicode Error: Connection to server was dropped. *** Error *** SMTP server error Error: Not a socket. Error: Not a socket. 2022.05.21 15:40:06 (Sat)-------------End of Session------------------

2 1

Unexpected EOF while Reading
by Joe Sterk 23 May '22

23 May '22

Stunnel User, When we upgrade from 5.60 to 5.63 or 5.64 we start to get the unexpected eof while reading on the SSL_accept log. I re-loaded 5.60 and the error went away. Does anyone have any ideas on what to review to solve this issue? [cid:[email protected]] Joe Sterk CIO (Chief Information Officer) [Description: Description: cid:[email protected]] Insurance Services Corp. ? (972) 896-0384 (Mobile) * (707) 303-8105 (Work) * joes(a)QuieTrack.com<mailto:[email protected]>

1 0

Stunnel - TLS error unexpected eof while reading
by rick.gregson＠gmail.com 18 May '22

18 May '22

Hi All, I have recently configured stunnel on a Windows Server, it has been configured using a certificate from our internal CA and appears to be functioning ok. However we have a load balancer that is doing a health check against the service and is polling S-Tunnel availability every 5 seconds each time a poll occurs I am seeing the error posted below in the logs. 2022.05.12 10:22:55 LOG3[4113]: SSL_read: ssl/record/rec_layer_s3.c:308: error:0A000126:SSL routines::unexpected eof while reading 2022.05.12 10:22:55 LOG5[4113]: Connection reset: 217 byte(s) sent to TLS, 49 byte(s) sent to socket Can I please have some advice on how to stop this error? Thank you Rick

2 3

Getting error "CERT: Pre-verification error: self signed certificate"
by Christopher Schultz 14 May '22

14 May '22

All, I'm running stunnel 4.56 as a server on Linux, as I have been doing for a while. I require clients to connect using their own client certs and yesterday one of them expired. The client generated a new certificate and sent it to me to install, and I'm getting the error in the subject. Version details: $ sudo stunnel -help stunnel 4.56 on x86_64-koji-linux-gnu platform Compiled/running with OpenSSL 1.0.2k-fips 26 Jan 2017 Threading:PTHREAD Sockets:POLL,IPv6 SSL:ENGINE,OCSP,FIPS Auth:LIBWRAP I have set verify=4 because I expect to place the exact certificate for every client into my CAFile. This has been working for years, and when I connect using openssl s_client, I can see which client certificates the server advertises it will allow to connect, and they reflect what I expect. The server certificate is also self-signed, so I copied that into the CAFile and I'm able to connect with openssl s_client using that certificate. So I think the problem can't be that the client's certificate is self-signed. So, to recap: 1. stunnel in server mode 2. CAFile points to a collection of PEM certs 3. verify=4 4. I can connect with my own valid, trusted, self-signed certificate 5. Client cannot connect with their valid, trusted, self-signed cert Any ideas? (Note: the client DOES appear to be using their new certificate, though I can only see the subject text which could be the same, yet with a different actual certificate.) Here is the debug(7) output from an attempted connection: : Starting certificate verification: depth=0, [subject] : CERT: Pre-verification error: self signed certificate : Certificate check failed: depth=0, [subject] : SSL alert (write): fatal: unknown CA : SSL_accept: 14089086: error:14089086:SSL routines:ssl3_get_client_certificate:certificate verify failed : Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket Thanks, -chris

1 1

Is stunnel really compliant with RFC 2487 / RFC 3207 ?
by Javier 12 May '22

12 May '22

Hi, first of all, I still use a 32-bit release (the latest, I think), so maybe things have changed on Stunnel since. But the statement that the protocol smtp option for a service is compliant with RFC 2487, should be 3207 (it is from 2002!), has been in the docs for ages, even in the latest version, 5.64: *** smtp Based on RFC 2487 - SMTP Service Extension for Secure SMTP over TLS *** Long ago I tested the protocol=smtp options as both, clients and server service, and I noticed that, and I think I told here to the list confirming it (maybe for some user using it on client mode), the option implied STARTTLS. Back then I didn't pay much attention to it. BUT the other day I was re-testing for a server service (own mail server sometimes I run) and... I said to my self that this shouldn't be like it was and well, I read the RFC and what tells is the following: *** A publicly-referenced SMTP server MUST NOT require use of the STARTTLS extension in order to deliver mail locally. This rule prevents the STARTTLS extension from damaging the interoperability of the Internet's SMTP infrastructure. A publicly-referenced SMTP server is an SMTP server which runs on port 25 of an Internet host listed in the MX record (or A record if an MX record is not present) for the domain name on the right hand side of an Internet mail address. *** https://datatracker.ietf.org/doc/html/rfc3207#section-4 So, if we use Stunnel to provide THE OPTION of secure TLS connections to other MTAs (MTA to MTA, or server to server) we are against the RFC itself as every connection to port 25 must be encrypted, or nothing, because, as Stunnel is the door to the port and only accepts the STARTTLS command, without redirecting any data to the mail server, no traffic on plain text reaches the server. Acting as a MSA (users - servers) there is no problem because, even if it hadn't/hasn't been widely supported, there are two ports 587 for plain text and 465 for TLS. So Stunnel could be set up to listen on 465 port only, directly accepting TLS sessions or after STARTTLS command (rejecting, in this case, those that don't want a secure channel). We have told several times, specially to newcomers (asking for http proxy, basically), that Stunnel isn't proxy, and it isn't, but in the case of a mail server it should act as is if we use it for a MTA mail server. It acts as is sending the welcome message from the mail server to the other MTA, but once the other MTA doesn't send a STARTTLS command, it closes the connection when, actually, what should do is pass all the dialog between MTAs. I think that is what Stunnel should do. And when just passing messages from mail server to the other MTA, just disable the logging for that connection. After all, the mail severs have already their own logs and there is no reason to log it on Stunnel, nor on the log screen/Stunnel window. Maybe just a line like "redirecting connection to the mail server". Said all the above, do latest versions behave differently? Do you think is a change that should be made to Stunnel to comply with the RFC, if on latest versions don't do yet, or am I wrong somewhere in my statement? Regards. P.S.: MTA: Mail Transfer Agent MSA: Mail Submission Agent MUA: Mail User Agent

3 5

GMail and OAuth 2.0
by Colin Knight 12 May '22

12 May '22

I’ve received an email from Google advising that it will no longer be able to login to Gmail with older third party apps using just username/password. Minimum login security requirements for software are now OAuth 2.0 or similar. I’m using an iPhone to post this which won’t be affected but my laptop uses POP3 collection via Foxmail and Stunnel. I must have continued access to mail on my laptop so will I have to dump Gmail or does Stunnel use OAuth 2.0 (it’s not in my config file.) Advice appreciated.

2 1

stunnel 5.64 released
by Michał Trojnara 06 May '22

06 May '22

Dear Users, I have released version 5.64 of stunnel. This release only includes Windows fixes and improvements. ### Version 5.64, 2022.05.06, urgency: MEDIUM * Security bugfixes - OpenSSL DLLs updated to version 3.0.3. * New features - Updated the pkcs11 engine for Windows. * Bugfixes - Removed the SERVICE_INTERACTIVE_PROCESS flag in "stunnel -install". Home page: https://www.stunnel.org/ Download: https://www.stunnel.org/downloads.html SHA-256 hashes: eebe53ed116ba43b2e786762b0c2b91511e7b74857ad4765824e7199e6faf883 stunnel-5.64.tar.gz 600e76b52a86b21f97a1af13734fdd2226c26646bb77f5f9f074ba3d5755f024 stunnel-5.64-win64-installer.exe 391db6166b22a6648fd1f1df584c13ade61c93f620e46b12ebb30b643e61d2d3 stunnel-5.64-android.zip Best regards, Mike

1 0

Handling AUTH LOGIN for SMTP
by reaperunknown＠live.com 22 Apr '22

22 Apr '22

Hello everyone. Perhaps I'm a little new with Stunnel but, I've successfully used it to get an old EarthLink MailStation compatible with GMail SMTP and POP mail. Kind of neat. That said, I wish to use Outlook, but going through the SMTP process manually via Telnet, I've found that the SMTP requires you issue "AUTH LOGIN" command, and give the username and password in Base64. If I do this manually, I can send SMTP mail all day. However, this unit is old enough that I don't think it knows how to do anything with SMTP auth. It also looks like Outlook doesn't turn SMTP auth off for Outlook.com personal accounts. Is there any way that I've missed to have Stunnel handle the AUTH LOGIN part of the SMTP process, so that device that can't, doesn't have to? Thanks!

2 1