stunnel-users

5 participants
3315 discussions

Re: [stunnel-users] Periodic stunnel 4.34 core dumps on AIX 5.3
by Allex, Paul M (USA E D EA STS) 10 Mar '11

10 Mar '11

I let the connection/memory script run over night and it appears that stunnel's memory usage has plateaued at 131,432 KB. I'm not sure how many connections had occurred when the memory usage leveled of, but currently there have been over 1.7 million connections to stunnel. I guess for now, please don't waste any time on this issue until I gather more information. Paul Allex

1 0

error:14094412:SSL routines:SSL3_READ_BYTES:sslv3
by don-stunnel-zyx＠isis.cs3-inc.com 04 Mar '11

04 Mar '11

stuff in [brackets] is replaced to protect the innocent stunnel.conf: ================ debug=5 output=/root/stunnel.log cert=/etc/pki/tls/certs/[certfile] CAfile=/etc/pki/tls/certs/[bundle].crt key=/etc/pki/tls/private/[private-key].key [debug] accept=801 client=yes connect=[...].com:443 ================ I then connect to localhost:801 and stunnel.log contains: ================ 2011.02.28 19:18:45 LOG5[20520:3086252944]: debug connected from 127.0.0.1:38472 2011.02.28 19:18:46 LOG3[20520:3086252944]: SSL_connect: 14094412: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate 2011.02.28 19:18:46 LOG5[20520:3086252944]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket ================ I don't see anything wrong with the cert or private key - the following demo shows that at least openssl is happy with them: ================ echo "hello there" | openssl rsautl -certin -inkey /etc/pki/tls/certs/[certfile] -encrypt |openssl rsautl -inkey /etc/pki/tls/private/[private-key].key -decrypt hello there I've captured the packets sent between stunnel and the server and wireshark shows (at ssl level) client SSLv3 Client Hello server SSLv3 Server Hello, Certificate, Certificate Request, Server Hello Done client SSLv3 Certificate, Client Key Exchange, Certificate Verify, Change Cipher Spec, Encrypted Handshake Message server SSLv3 Alert (Level: Fatal, Description: Bad Certificate) followed by TCP resets So the server is complaining about my certificate. This is certainly not what I would have guessed the message in the log meant. It looks like an error from stunnel. So is it an error from stunnel or is it stunnel reporting a complaint from the server? And if the latter, what exactly did the server send? The entire message starting with error? or starting with 14094412? or what? Could this mean that the server doesn't understand the certificate (cause it's a 2K certificate instead of 1K?) or could it mean that the server doesn't like it for some other reason?

2 2

curl: (35) error:14094412:SSL routines:SSL3_READ_BYTES:sslv3
by don-stunnel-zyx＠isis.cs3-inc.com 01 Mar '11

01 Mar '11

Here's my command curl -E /root/key-cert https://ewsg-cert.prudent... and the result: curl: (35) error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate This seems weird to me: Note that this certificate is the private key and the private certificate concatenated! I assume the private certificate is just the certificate. In any case my file key-cert looks like -----BEGIN RSA PRIVATE KEY----- ... -----END RSA PRIVATE KEY----- -----BEGIN CERTIFICATE----- ... -----END CERTIFICATE----- What does the error above mean and what could I possibly be doing wrong to cause it?

1 1

forcing my untangle server to scan my https traffic
by Bing H Bang 01 Mar '11

01 Mar '11

I'm so close to making this work, I can taste it. I also need some suggestions on how to fix the last hurdle. My setup 10.0.0.10 ip of my webserver 24.159.165.122 static ip of my untangle server (router mode) untangle server port forwards 443 to 10.0.0.10:10443 80 to 10.0.0.10:80 (web server only listens on 443) stunnel config file on the web server [https-terminate] client = no cert = /var/lib/stroot/cypherdog.com.pem accept = 10.0.0.10:10443 connect = 24.159.165.122:80 [https-re-engage] client = yes accept = 10.0.0.10:80 connect = 10.0.0.10:443 What I'm trying to do is accept https traffic, decrypt it, pass it through untangle, then encrypt it back as it gets delivered to the https port of the web server. This setup works in that I can point my browser at the https port of my untangle server and the web pages work properly. What doesn't work is the untangle server shows no scanning activity when I access the web pages. I think the path webserver->untangle->webserver does not trigger the scanning in untangle because the traffic it sees is from an internal ip going to the same internal ip. Is there a way to fix this, anyone?

3 3

Upgrade of evil.patch for version 4.35
by Jeremie Le Hen 22 Feb '11

22 Feb '11

Hi Michal, One of my former coworker and now friend undertook the upgrade of contrib/misc/evil.patch against the latest stunnel version. Would you mine putting this new version on your FTP site please? Thanks a lot. Regards, -- Jeremie Le Hen Humans are born free and equal. But some are more equal than others. Coluche

1 0

Problems SSLifying an "exec" Service without KeepAlive
by Jochen Bern 22 Feb '11

22 Feb '11

Hello everyone, today I tried to set up network access to a service using stunnel 4.35. The underlying service, by default, exits after every request+reply. When running stunnel in daemon mode, this seems to upset things such that subsequent connections hang. I cannot quite pinpoint whether it's a config problem, design (of my setup) problem, or bug, so any help's welcome ... More info: The underlying service accesses a Nagios' livestatus interface > http://mathias-kettner.de/checkmk_livestatus.html#H1:Remote%20access%20to%2… using the "unixcat" tool provided. Unless you specifically request connection keepalives, unixcat will close/exit after answering one request, *or* timing out waiting for one. That "exit procedure", AFAICT, isn't different from what the imapd or pppd in the stunnel(8) manpage's EXAMPLES section do ... I need to secure access to the service, so I'm throwing client cert verification and libwrap at the connections. The current daemon mode configuration (with several commented-out attempts) reads, slightly anonymized: client=no verify=3 pid=/var/run/stunnel/livestatus.pid #setuid=stunnel #socket = a:SO_REUSEADDR=0 #foreground= yes [livestatus] accept = [...PORT...] cert = [...SERVER...].pem key = [...SERVER...].key CAfile = [...CA...].pem CApath = [...TempStagingDirectory...] exec = /usr/local/bin/unixcat execargs = unixcat /var/lib/nagios3/rw/live pty = yes retry = no session = 3 #TIMEOUTclose = 0 #TIMEOUTbusy = 5 #TIMEOUTidle = 5 After starting the stunnel daemon, I can perform *one* normal connection: > # openssl s_client -CAfile [...CA...].pem -showcerts \ > > -connect [...SERVER...]:[...PORT...] -cert [...CLIENT...].cert \ > > -key [...CLIENT...].key -state > CONNECTED(00000003) > SSL_connect:before/connect initialization > SSL_connect:SSLv2/v3 write client hello A > SSL_connect:SSLv3 read server hello A [...] > SSL handshake has read 1743 bytes and written 1933 bytes > --- > New, TLSv1/SSLv3, Cipher is AES256-SHA > Server public key is 1024 bit > Compression: NONE > Expansion: NONE > SSL-Session: > Protocol : TLSv1 > Cipher : AES256-SHA > Session-ID: 1B4221E2917E3BD49AA2102C2CCE60A624DB256D6B4D61F9D0D77EA843DC31BC > Session-ID-ctx: > Master-Key: 57E6DF8E7E0A741B718E356467450DD00969465295A9C6FE03416ED16E74AF93058EC168EF6DF1B9F3F637F505FF6EF4 > Key-Arg : None > Start Time: 1298390481 > Timeout : 300 (sec) > Verify return code: 0 (ok) > --- At that point, I can type in one request, then unixcat terminates, stunnel closes the connection and s_client (?) reports: > read:errno=104 Typical log output on the server side: > LOG5[30042:139819109037792]: Reading configuration from file /etc/stunnel/livestatus.conf > LOG5[30042:139819109037792]: Peer certificate location [...TempStagingDirectory...] > LOG5[30042:139819109037792]: Configuration successful > LOG5[30042:139819109037792]: No limit detected for the number of clients > LOG5[30043:139819109037792]: stunnel 4.35 on x86_64-unknown-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007 > LOG5[30043:139819109037792]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 [...] > LOG5[30043:1075198288]: Service livestatus accepted connection from [...CLIENT...]:39287 > LOG5[30043:1075198288]: Certificate accepted: depth=1, [...CA...] > LOG5[30043:1075198288]: Certificate accepted: depth=0, [...CLIENT...] > LOG3[30043:1075198288]: readsocket: Input/output error (5) > LOG5[30043:1075198288]: Connection reset: 2293 bytes sent to SSL, 33 bytes sent to socket Rerunning the exact same command stops dead after the > CONNECTED(00000003) and manually "telnet"ing to the port from a different host doesn't behave in a normal way (closing the connection after I type the first line of non-SSL stuff) anymore, either. Running the unixcat command from a local command line, however, still works normally. I tried running stunnel off inetd, which seems to work, so I'd guess it's the server-side SSL session cacheing which interferes. However, I don't see any related stunnel config keywords in the manpage, and stunnel offering a cached session to a connection *from a different client host* sound odd to me, too ... ? Kind regards, J. Bern -- Jochen Bern, Systemingenieur --- LINworks GmbH <http://www.LINworks.de/> Postfach 100121, 64201 Darmstadt | Robert-Koch-Str. 9, 64331 Weiterstadt PGP (1024D/4096g) FP = D18B 41B1 16C0 11BA 7F8C DCF7 E1D5 FAF4 444E 1C27 Tel. +49 6151 9067-231, Zentr. -0, Fax -299 - Amtsg. Darmstadt HRB 85202 Unternehmenssitz Weiterstadt, Geschäftsführer Metin Dogan, Oliver Michel

1 0

New and Utterly Confused on Ubuntu Linux
by Traps 20 Feb '11

20 Feb '11

I am totally new to stunnel and am quite confused. I use Ubuntu 10.04 and have installed the stunnel4 deb package. I need to do a couple of things. At boot up I need to accept ssl connections on an inbound port and forward it to a non-ssl compliant app listening on another port. The second thing I need to do is make an ssl required connection to a pop server on another host out of a non-ssl mail client on the local machine. I have no problem with the ports, port forwarding, etc. I just do not know how to set up stunnel to accomplish this. Let's just use this as an example: 1. I need to accept inbound ssl connections on 995 (port 995 is open) and send them to the local machine non-ssl client listening on 2995. 2. I need to ssl connect to pop.gmail.com:995 via a non-ssl mail client on the local machine and I want the mail client to connect to stunnel on port 3995. 3. I need both of these scenarios to start at boot up. I don't even know where to start with stunnel4 to do this. Actually I can set up stunnel.conf for either but one's a server operation and the other is a client operation and can't get them both to work simultaneously. To start stunnel at boot up I simply edited /etc/default/stunnel and /etc/init.d/stunnel4 and changed ENABLED=0 to ENABLED=1 in both files. Something tells me this is entirely the wrong way to do what I want to do. It works for either the client task or the server task, depending on which one I have enabled in stunnel.conf but I just know this is not how I am suppose to be doing it. Will someone help? -- View this message in context: http://old.nabble.com/New-and-Utterly-Confused-on-Ubuntu-Linux-tp30970693p3… Sent from the Stunnel - Users mailing list archive at Nabble.com.

2 1

fips=no
by dominic.schweizer＠zkb.ch 18 Feb '11

18 Feb '11

Hi All, I have the problem that when I start Stunnel, the following error pops up: FIPS_mode_set: 2D06C06E: error:2D06C06E:FIPS routines:FIPS_mode_set:fingerprint does not match I now added in my config file: fips=no and it works. My question is now, what is the difference between with fips and without fips? stunnel version 4.34 openssl 0.9.8 redhat 5 Thanks in advance for the answer Regards Dominic Freundliche Grüsse Dominic Schweizer Zürcher Kantonalbank Unix System Engineer, LIOEU Neue Hard 9, 8005 Zürich Telefon 044 292 83 52, Fax 044 292 80 34 Briefadresse: Postfach 8010 Zürich, http://www.zkb.ch Sie drucken dieses E-Mail nicht aus? Die Umwelt dankt! ___________________________________________________________________ Disclaimer : Diese Mitteilung ist nur fuer die Empfaengerin / den Empfaenger bestimmt. Fuer den Fall, dass sie von nichtberechtigten Personen empfangen wird, bitten wir diese hoeflich, die Mitteilung an die ZKB zurueckzusenden und anschliessend die Mitteilung mit allen Anhaengen sowie allfaellige Kopien zu vernichten bzw. zu loeschen. Der Gebrauch der Information ist verboten. This message is intended only for the named recipient and may contain confidential or privileged information. If you have received it in error, please advise the sender by return e-mail and delete this message and any attachments. Any unauthorised use or dissemination of this information is strictly prohibited.

2 1

openvpn with stunnel
by Guy Sapir 17 Feb '11

17 Feb '11

Hi all, Is it possible to use openvpn on port 80 or 443 using stunnel so the packets on openvpn will be wrapped as http or https pure packets. What should I do in the config file. Guy Sapir

2 1

Wireshark didn't show TLSv1 traffic?
by Bao, Robert 17 Feb '11

17 Feb '11

Hi, I have "ciphers = AES256-SHA" option in stunnel.conf file. And when the server/client established the connection, I see this line in the log file: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 However when I use Wireshark to sniff the traffic, I only see "TCP" in the <Protocol> column for the traffics between the server and the client. Is this normal? What did I do wrong? Thanks. Robert Bao Software House Tyco International 978-577-4202 Explore our new Tyco Online Learning Center Web-based Training Bundles at: www.swhouse.com/support/tyco_online_learning_center.aspx This e-mail may contain or have attached to it information or technology the export or re-export of which is restricted by U.S. laws and regulations. By viewing this e-mail and any attachments, the recipient agrees to the following: (i) the recipients use of the contents of this e-mail and any attachments shall comply with all applicable laws, rules and regulations, including, without limitation, U.S. international trade laws and regulations, and (ii) the recipient may not transfer or otherwise export or re-export any information or technology contained in this e-mail or any attachment except in full compliance with the export controls administered by the U.S. and other countries and any applicable import and use restrictions.

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users