stunnel-users

2 participants
3307 discussions

Re: stunnel consumes 99% cpu at HPUX
by Gavin Ho 06 Nov '04

06 Nov '04

Mike, thanks for your information. Each of our HPUX machines has 2 CPUs. Actually, before post my problem on this mailing list, I tried to search on Google but can't find any hints to solve the problem. Then I tried to browse the stunnel 4.0.5 source code and can't find any hints too. But I noticed that someone said on some historical newsgroup postings the problem may be related to openssl. Do you think thats true? I will wait for the version 4.0.6 and hope it can solve my problem. Cheers, Gavin -- ___________________________________________________________ Sign-up for Ads Free at Mail.com http://promo.mail.com/adsfreejump.htm

2 1

stunnel consumes 99% cpu at HPUX
by gykho＠ogcio.gov.hk 04 Nov '04

04 Nov '04

Hi All, We set up stunnel from two linux machines located at DMZ to a HPUX cluster located at Private Zone. There is firewall in between. We use stunnel to encrypt Tomcat AJP traffic from apache web servers on linux machines to JBoss app server a HPUX cluster. The stunnel run at HPUX cluster was started as deamon mode and listened on a cluster failover IP instead of host IP. We found that the stunnel process at HPUX cluster consumed 99% CPU after run for a few days (started at Oct 26 10:26 and it was reported 99% CPU at Oct 29 23:00, under a very low traffic. Can anyone help? The debug log at HPUX is also attached, as shown in the log there was no requeset on Oct29 but the CPU still shot up to 99%. Cheers, Gavin Output of "stunnel -version" from Linux side ================================== stunnel 4.04 on i386-redhat-linux-gnu PTHREAD+LIBWRAP with OpenSSL 0.9.7a Feb 19 2003 Global options cert = /etc/stunnel/stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH debug = 5 key = /etc/stunnel/stunnel.pem pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes session = 300 seconds verify = none Service-level options TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTidle = 43200 seconds Output of "uanme -a" from Linux side =========================== Linux www12-id.spica.hksarg 2.4.21-15.ELsmp #1 SMP Thu Apr 22 00:18:24 EDT 2004 i686 i686 i386 GNU/Linux Output of "gcc -v" from Linux side ======================== Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/3.2.3/specs Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --with-system-zlib --enable-__cxa_atexit --host=i386-redhat-linux Thread model: posix gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-39) Output of "openssl version" from Linux side =============================== OpenSSL 0.9.7a Feb 19 2003 "stunnel conf" at Linux side ================== chroot = /u01/var/run/stunnel # PID is created inside chroot jail pid = /deptstunnel.pid setuid = nobody setgid = nobody socket=r:SO_KEEPALIVE=1 # Some debugging stuff debug = 7 output = /u01/var/stunnel/deptstunnel.log foreground = no # Use it for client mode client = yes # Service-level configuration [App] accept = localhost:8111 connect = hpux-service-ip:8111 Output of "stunnel -version" from HPUX side ================================ stunnel 4.05 on hppa2.0w-hp-hpux11.11 PTHREAD+LIBWRAP with OpenSSL 0.9.7d 17 Mar 2004 Global options cert = /opt/iexpress/stunnel/etc/stunnel/stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH debug = 5 EGD = /var/run/egd-pool key = /opt/iexpress/stunnel/etc/stunnel/stunnel.pem pid = /opt/iexpress/stunnel/var/run/stunnel.pid RNDbytes = 64 RNDoverwrite = yes session = 300 seconds verify = none Service-level options TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTidle = 43200 seconds Output of "uname -a" from HPUX side =========================== HP-UX dptshr1 B.11.11 U 9000/800 2640250230 unlimited-user license Output of "openssl version" from HPUX side =============================== OpenSSL 0.9.7d 17 Mar 2004 "stunnel conf" at HPUX side ================== cert = /u01/etc/stunnel/deptstunnel.cer key = /u01/etc/stunnel/deptstunnel.key chroot = /u01/var/run/stunnel/ # PID is created inside chroot jail pid = /deptstunnel.pid setuid = stunnel setgid = stunnel # Some debugging stuff debug = 7 output = /u01/var/stunnel/deptstunnel.log foreground = no # Use it for client mode #client = yes # Service-level configuration [App] accept = hpux-service-ip:8111 connect = localhost:9111 === ENDS ===

2 1

UDP End-points
by Red Phoenix 03 Nov '04

03 Nov '04

Michal Trojnara mentioned: > On 2004-11-02, at 02:02, Red Phoenix wrote: > > Establishing a SSL connection over UDP would be pretty tough, but has > > anyone thought about the possibility of allowing the 'listen' and > > 'destination' points to be UDP ports, with the main comms routed over > > TCP? This would effectively accomplish what most UDP requestors need. > It's not as easy as you think. SSL requires a stream of data as a > transport. It's much more than a simple UDP forwarder. Perhaps I wasn't quite as clear as I intended.. :) I'm not suggesting that SSL over UDP should be done.. I'm suggesting that stunnel could potentially act as a UDP-over-encrypted-TCP gateway. For example: (For the moment, lets focus on syslog data): Pre-stunnel: Server 1 Sends syslog messages to UDP port 514 on Server 2. Server1 and Server2 both then install stunnel: Server1: Syslog messages are redirected to localhost UDP port 514 (rather than Server2 UDP port 514). Server1: Stunnel listens on UDP port 514, and sends encrypted data to Server2 on TCP port 12345 Server2: Stunnel listens on TCP port 12345, decrypts the data, and sends to localhost UDP port 514. This way, stunnel acts as the UDP to TCP (encrypted) to UDP gateway - in a similar way that it can currently act as a pure TCP -> TCP (encrypted) -> TCP gateway. Regards, Leigh.

3 3

Remove Me
by Lauren Hillquist 03 Nov '04

03 Nov '04

How do I get off this mailing list? Lauren

2 1

OpenSSL 0.9.7e WIN32 binaries
by Michal Trojnara 02 Nov '04

02 Nov '04

Dear Users, I've built WIN32 binaries of the latest OpenSSL library. They're available for download on my ftp site: ftp://stunnel.mirt.net/openssl/binary-0.9.7e-zlib/ Best regards, Mike

1 0

Compilation problem of stunnel-4.05 on solaris 9
by Susan Shao 02 Nov '04

02 Nov '04

hello, I am trying to configure Stunnel-4.05 on Solaris9 and got the some error you posted on the Stunnel list group. But I didn't find any solution to solve this problem on the web. I just wonder if you have solved this and got Stunned installed? I would really appreciate if you can let me know. Thank you!

1 0

UDP end-points
by Red Phoenix 02 Nov '04

02 Nov '04

Establishing a SSL connection over UDP would be pretty tough, but has anyone thought about the possibility of allowing the 'listen' and 'destination' points to be UDP ports, with the main comms routed over TCP? This would effectively accomplish what most UDP requestors need. I was thinking along the lines of: Server1 (source): client = yes [syslogcrypt] # listen on udp port 514 for syslog messages uaccept = 514 # connect to remote stunnel TCP port 5140 connect = 5140 - - - - - Server2 (destination): client = no [syslogcrypt] # listen on 5140 accept = 5140 # connect to local udp port 514 uconnect = 514 Logic would be along the lines of: if client = yes and uconnect is used, then die (or assume they meant tcp). if client = no and uaccept is used, then die (or assume tcp). it should be reasonably easy to add a flag into LOCAL_OPTIONS somewhere, so that it opens a UDP server/client - along the lines of (mangled out of a simple udp server app I wrote): int sockfd,rbind; struct sockaddr_in serv_addr, client_addr; int port,sockopt=1; char buffer[1234]; if((sockfd=socket(AF_INET, SOCK_DGRAM,0))<0) { fprintf(stderr,"UDP Server: errno = %d\n", errno); fprintf(stderr,"Cannot open datagram socket\n"); exit(1); } setsockopt(sockfd, SOL_SOCKET, SO_REUSEADDR, &sockopt, sizeof(sockopt)); // check that ports are available, and files exist? bzero((char *) &serv_addr, sizeof(serv_addr)); serv_addr.sin_family = AF_INET; serv_addr.sin_addr.s_addr = htonl(INADDR_ANY); serv_addr.sin_port = htons(portnumber); if((rbind = bind(sockfd, (struct sockaddr *) &serv_addr, sizeof(serv_addr))) < 0) { fprintf(stderr,"Port is not available. Exiting.\n"); exit(2); } while(1) { length=recvfrom(sockfd,buffer,sizeof(buffer)-1,0,(struct sockaddr *) &client_addr,&addrlen); } Any thoughts? Regards, Leigh.

2 1

Re: [stunnel-users] permanent tunnel
by Michal Trojnara 01 Nov '04

01 Nov '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Saturday 30 of October 2004 01:16, Ramin Ali Dousti wrote: > You're right in that I don't have persistent TCP connection. I just > want to make sure that the SSL handshake > does not take place with every short-lived connection. You don't want to negotiate new keys for every connection, right? In SSL there's a mechanism for it called "session cache". In stunnel you can increase the timeout for session cache with "session" option (on both client and sever). Just set it to a very high value (a month? a year?). The default is 300 seconds (5 minutes). Best regards, Mike -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBg0Kf/NU+nXTHMtERAl0mAKDODCg+9LwUVoBfx+i6ou7iYmjgcQCfYprS Mv3KKdhQTUcs81yIw/KNT70= =NWHN -----END PGP SIGNATURE-----

2 2

VPN with windows
by Angelo Raspanti 30 Oct '04

30 Oct '04

I have experimented with succes to use stunnel for make a VPN between two PC with linux.It work with start pppd on both sides when the SSL negotiation is termined with success. At this time server and client sides launch the pppd daemon and the connecction with IP address read from pppd command line (written in config file of stunnel) is made. To make a VPN with two linux BOX is easily ! But if one of the two sides is a Windows plattaform ? I think that the use of this tecnique is noot possible. How to make un VPN between a Linux Plattaform and a Windows plattaform ? Is possible ? Thanks in advance and sorry for my bad english

1 0

RE: [stunnel-users] Stunnel & Java SSL
by richard＠oversight.co.nz 30 Oct '04

30 Oct '04

Managed to sort this issue out by upgrading my JVM to 1.5.0 and adding the certificated in under the Java control panel. Ran into another problem afterwards with my application generating an UNKNOWN PROTOCOL error on the 3rd TCP session after successfully accepting the first two... very strange. I think I'm going to have to give up on the idea of using Java's or IE's SSL system and use Stunnel as a client too. Found a great GUI for Stunnel on Mac OS X called SSL Enabler, shame theres not one as nice for Windows! Richard Watson > Upgrade your OpenSSL package for a start... it's up to .9.7d, tho I use > .9.7a. Re-compile OpenSSL on your machine... try then. > > Did you download a binary of STunnel? > > -----Original Message----- > From: stunnel-users-bounces(a)mirt.net > [mailto:[email protected]] On Behalf Of > richard(a)oversight.co.nz > Sent: Friday, 29 October 2004 11:47 a.m. > To: stunnel-users(a)mirt.net > Subject: [stunnel-users] Stunnel & Java SSL > > I'm developing a website where a java applet is downloaded over an > https session provided by Stunnel (stunnel 4.04 on i586-pc-linux-gnu > PTHREAD with OpenSSL 0.9.6c 21 dec 2001) running on port 1080. > The applet codebase in the html code is set to > https://x.x.x.x:1080/xxxx.jar > > To complicate this issue, Stunnel is set to verify=3 i.e. it requires a > valid client certificate. > It seems that the java implementation of SSL (JVM 1.4.1_03) won't > respond to prompts for client certificates?? > Stunnel simply times out with the following error.... > > 2004.10.29 11:45:34 LOG7[6881:1024]: service accepted FD=10 from > 192.168.1.2:19302004.10.29 11:45:34 LOG7[6881:1024]: FD 10 in > non-blocking mode > 2004.10.29 11:45:34 LOG7[6897:6146]: service finished (0 left) > 2004.10.29 11:45:34 LOG7[6898:7171]: service started > 2004.10.29 11:45:34 LOG5[6898:7171]: service connected from > 192.168.1.2:1930 2004.10.29 11:45:34 LOG7[6898:7171]: SSL state > (accept): before/accept initialization2004.10.29 11:45:34 > LOG7[6898:7171]: waitforsocket: FD=10, DIR=read > 2004.10.29 11:45:39 LOG7[6898:7171]: waitforsocket: ok > 2004.10.29 11:45:39 LOG7[6898:7171]: SSL state (accept): SSLv3 read > client hello A2004.10.29 11:45:39 LOG7[6898:7171]: SSL state (accept): > SSLv3 write server hello A2004.10.29 11:45:39 LOG7[6898:7171]: SSL > state (accept): SSLv3 write > certificate A2004.10.29 11:45:39 LOG7[6898:7171]: SSL state (accept): > SSLv3 write > certificate request A2004.10.29 11:45:39 LOG7[6898:7171]: SSL state > (accept): SSLv3 flush data > 2004.10.29 11:45:39 LOG7[6898:7171]: waitforsocket: FD=10, DIR=read > 2004.10.29 11:45:39 LOG7[6898:7171]: waitforsocket: ok > 2004.10.29 11:45:39 LOG7[6898:7171]: SSL alert (read): warning: no > certificate2004.10.29 11:45:39 LOG7[6898:7171]: waitforsocket: FD=10, > DIR=read > 2004.10.29 11:45:39 LOG7[6898:7171]: waitforsocket: ok > 2004.10.29 11:45:39 LOG7[6898:7171]: SSL alert (write): fatal: > handshake failure2004.10.29 11:45:39 LOG3[6898:7171]: SSL_accept: > 140890C7: > error:140890C7:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:peer did not > return a certificate2004.10.29 11:45:39 LOG7[6898:7171]: service > finished (0 left) > > Does anyone know a way around this? > > Thank you, > > Richard Watson > > > > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)mirt.net > http://stunnel.mirt.net/mailman/listinfo/stunnel-users

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users