stunnel-users

2 participants
3307 discussions

PEM routines:PEM_read_bio Problem
by Metal Gear 28 Feb '05

28 Feb '05

Hi all, i was configuring my syslog-ng server with stunnel and it worked fine for somedays but after that i upgraded to new SSL libraries (OpenSSL 0.9.7e) from (OpenSSL 0x0090701f) then i m getting this "stunnel[2480]: SSL_CTX_use_RSAPrivateKey_file: 906D06C: error:0906D06C:PEM routines:PEM_read_bio" error (i have given the link of stunnel binary in rc.local, to start at boot time, at i get this error in logs) i m using stunnel (stunnel 4.07). Can anyone has any idea about it. Thanks

1 0

Stunnel 4.08 released
by Michal Trojnara 27 Feb '05

27 Feb '05

Here is the ChangeLog entry for the new stunnel 4.08: Version 4.08, 2005.02.27, urgency: LOW: * New features - New -quiet option was added to install NT service without a message box. * Bugfixes - Using $(DESTDIR) in tools/Makefile.am. - Define NI_NUMERICHOST and NI_NUMERICSERV when needed. - Length of configuration file line increased from 256B to 16KB. - Stunnel sends close_notify when a close_notify is received from SSL peer and all remaining data is sent to SSL peer. - Some fixes for bugs detected by the watchdog. * Release notes - There were many changes in the transfer() function (the main loop). This version should be thoroughly tested before using it in the mission-critical environment. Home page & downloads: http://stunnel.mirt.net/ Best regards, Mike

1 0

Help Needed
by Alexander Lazic 25 Feb '05

25 Feb '05

Hi, i have try to add the X-Forwarded-For Header, based on http://www.stunnel.org/patches/desc/xforwardedfor_jrd.html, into stunnel 4.07, but i don't come to a solution :-( I have try to add i into 'client.c => transfer()'. Please can anybody review the attached Patch and point me to the right way ;-) I'am not shure that i add the 'insert' into the right place :-( Thanx for help ;-)) al ;-)

1 1

verify =3 error with certificate client
by Humberto Morell 25 Feb '05

25 Feb '05

Hello List I have stunnel 4.7 In the messages of the list I have not seen solution to my problem. This is VERIFY ERROR ONLY MY: no cert stunnel.log in Server ################## 2005.02.25 07:55:07 LOG5[2501:1076546480]: VERIFY OK: depth=1, /C=CU/ST=Ciudad Habana/L=Centro Habana/O=Segurmatica/OU=Agencia de Certificacion/CN=Segurmatica/emailAddress=ca(a)segurmatica.cu 2005.02.25 07:55:07 LOG4[2501:1076546480]: VERIFY ERROR ONLY MY: no cert for /C=CU/ST=Ciudad Habana/L=Centro Habana/O=Ministerio Informatica y Comunicaciones/OU=Segurmatica/CN=Humberto Morell/emailAddress=morell(a)seg.inf.cu 2005.02.25 07:55:07 LOG7[2501:1076546480]: SSL alert (write): fatal: certificate unknown ############# stunnel.conf in Server ############## #chroot = /var/lib/stunnel/ verify = 3 CApath = /etc/stunnel/certdb # or simply use CAfile instead: #CAfile = /etc/stunnel/certs.pem CAfile = /etc/stunnel/acsegurmatica.crt #cert = /etc/stunnel/stunnel.pem cert = /etc/stunnel/certstunnel.pem ################# File in /etc/stunnel ############### certdb morell.pem stunnel.prueba.pem certstunnel.pem stunnel.conf acsegurmatica.crt morell.crt stunnel.log certclient morell.key stunnel.pem ############### Link in /etc/stunnel/certdb ############### drwxr-xr-x 2 root root 176 Feb 25 11:06 . drwx------ 4 root root 472 Feb 25 10:52 .. lrwxrwxrwx 1 root root 24 Feb 25 11:00 2307a3fe.0 -> /etc/stunnel/stunnel.pem lrwxrwxrwx 1 root root 30 Feb 25 11:01 3f5b7ca8.0 -> /etc/stunnel/acsegurmatica.crt lrwxrwxrwx 1 root root 23 Feb 25 11:03 3fb3183e.0 -> /etc/stunnel/morell.pem lrwxrwxrwx 1 root root 28 Feb 25 11:06 d14abd18.0 -> /etc/stunnel/certstunnel.pem ################# client in Windows stunnel.conf ############## client = yes cert = d:\morell.pem debug = 7 output = d:\stunnel.log [lsd] accept = 9595 connect = 10.10.1.83:9500 [ssh] accept = 2222 connect = 10.10.1.83:9522 ##################### Note: I don't use chroot I have try, but idem error with. File morell.pem only client certificate and other time file morell.pem Key private crl Certificate With verify = 2 all is ok Please help Best regards Morell

1 0

openssl - generating stunnel.pem - stunnel.cnf
by k-i-r＠web.de 24 Feb '05

24 Feb '05

Using Stunnel under Windows I want to create a certificate (stunnel.pem) with Openssl. According to FAQ the syntax for creating a certificate with Openssl is openssl req -new -x509 -days 365 -nodes -config stunnel.cnf -out stunnel.pem -keyout stunnel.pem I use openssl for windows (as part of apache-windows-http-server) . Where do I get the file stunnel.cnf ? Or is this file not necessary for creating a certificate ? Thanks for help, k.

3 2

Stunnel and configuration
by Bohdan Linda 22 Feb '05

22 Feb '05

Hi all, I have configured stunnel to do the client authetication, but I have some question. I have used following config: cert = /etc/certificates/server.pem - file with signed server cert and key (passwordless) chroot = /var/run/stunnel/ CAfile = /etc/certificates/certs -file where first item is my CA certificate followed by list of all client certificates sgined by my CA. setuid = nobody setgid = nogroup pid = /stunnel.pid verify = 3 This setup is working, but this seems to me very "unlogical". If I create for me "more logic" setup: cert = /etc/certificates/server.pem chroot = /var/run/stunnel/ CAfile = /etc/certificates/CA/cacert.pem - only certificate of my CA CRLfile = /etc/certificates/crls - only certificates signed by my CA I get the following error: 2005.02.22 15:15:10 LOG5[22418:81926]: VERIFY OK: depth=1, /C= ..... 2005.02.22 15:15:10 LOG4[22418:81926]: VERIFY ERROR ONLY MY: no cert for /C= The question is ... why? Why CAfile has to contain all client certificates, when clients certs are not CA? Why I cannot have separate file for CA and separate file for certificates that I want accept? If I do the similar setup in mod_ssl, the configuration works as expected. Anyway, I'am newbie to deploy stunnel, thus I would like to ask you for giving me you opinion of this configuration, caveats and possible enhancements. Thanks for any comments, Bohdan Linda

3 4

SSL_read (ERROR_SYSCALL)
by Passreality 16 Feb '05

16 Feb '05

Hi Im trying to connect using mysql, there are no fw between the 2 boxes. I tested with stunnel 3.x and 4.x but when i use the 4.0.23 mysldb it just wount work. When i use the older db it works. Any ideas on how to solve this error ? /Christian Stunnel 4.07 Kernel 2.4.18 gcc version 3.3.5 (Debian 1:3.3.5-8) mysql Ver 12.22 Distrib 4.0.23 Dist Debian Testing Im using stunnel.pem (default one) Client Log 2005.02.16 15:04:19 LOG7[2147:16384]: mysql accepted FD=10 from 217.212.4.33:40797 2005.02.16 15:04:19 LOG7[2147:16384]: FD 10 in non-blocking mode 2005.02.16 15:04:19 LOG7[2322:49154]: mysql started 2005.02.16 15:04:19 LOG7[2322:49154]: TCP_NODELAY option set on local socket 2005.02.16 15:04:19 LOG5[2322:49154]: mysql connected from 217.212.4.33:40797 2005.02.16 15:04:19 LOG7[2322:49154]: FD 13 in non-blocking mode 2005.02.16 15:04:19 LOG7[2322:49154]: mysql connecting 217.212.4.198:3307 2005.02.16 15:04:19 LOG7[2322:49154]: connect_wait: waiting 10 seconds 2005.02.16 15:04:19 LOG7[2322:49154]: connect_wait: connected 2005.02.16 15:04:19 LOG7[2322:49154]: Remote FD=13 initialized 2005.02.16 15:04:19 LOG7[2322:49154]: TCP_NODELAY option set on remote socket 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): before/connect initialization 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 write client hello A 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 read server hello A 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 read server certificate A 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 read server done A 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 write client key exchange A 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 write change cipher spec A 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 write finished A 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 flush data 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 read finished A 2005.02.16 15:04:19 LOG7[2322:49154]: 2 items in the session cache 2005.02.16 15:04:19 LOG7[2322:49154]: 3 client connects (SSL_connect()) 2005.02.16 15:04:19 LOG7[2322:49154]: 3 client connects that finished 2005.02.16 15:04:19 LOG7[2322:49154]: 0 client renegotiatations requested 2005.02.16 15:04:19 LOG7[2322:49154]: 0 server connects (SSL_accept()) 2005.02.16 15:04:19 LOG7[2322:49154]: 0 server connects that finished 2005.02.16 15:04:19 LOG7[2322:49154]: 0 server renegotiatiations requested 2005.02.16 15:04:19 LOG7[2322:49154]: 1 session cache hits 2005.02.16 15:04:19 LOG7[2322:49154]: 0 session cache misses 2005.02.16 15:04:19 LOG7[2322:49154]: 0 session cache timeouts 2005.02.16 15:04:19 LOG6[2322:49154]: SSL connected: new session negotiated 2005.02.16 15:04:19 LOG6[2322:49154]: Negotiated ciphers: DES-CBC3-SHA SSLv3 Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1 2005.02.16 15:04:19 LOG3[2322:49154]: SSL_read (ERROR_SYSCALL): Connection reset by peer (104) 2005.02.16 15:04:19 LOG5[2322:49154]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2005.02.16 15:04:19 LOG7[2322:49154]: mysql finished (0 left) Server Log 2005.02.16 15:04:51 LOG7[29786:16384]: mysql accepted FD=10 from 217.212.4.33:40798 2005.02.16 15:04:51 LOG7[29786:16384]: FD 10 in non-blocking mode 2005.02.16 15:04:51 LOG7[29814:49154]: mysql started 2005.02.16 15:04:51 LOG7[29814:49154]: TCP_NODELAY option set on local socket 2005.02.16 15:04:51 LOG5[29814:49154]: mysql connected from 217.212.4.33:40798 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): before/accept initialization 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 read client hello A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 write server hello A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 write certificate A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 write server done A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 flush data 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 read client key exchange A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 read finished A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 write change cipher spec A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 write finished A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 flush data 2005.02.16 15:04:51 LOG7[29814:49154]: 1 items in the session cache 2005.02.16 15:04:51 LOG7[29814:49154]: 0 client connects (SSL_connect()) 2005.02.16 15:04:51 LOG7[29814:49154]: 0 client connects that finished 2005.02.16 15:04:51 LOG7[29814:49154]: 0 client renegotiatations requested 2005.02.16 15:04:51 LOG7[29814:49154]: 3 server connects (SSL_accept()) 2005.02.16 15:04:51 LOG7[29814:49154]: 3 server connects that finished 2005.02.16 15:04:51 LOG7[29814:49154]: 0 server renegotiatiations requested 2005.02.16 15:04:51 LOG7[29814:49154]: 1 session cache hits 2005.02.16 15:04:51 LOG7[29814:49154]: 0 session cache misses 2005.02.16 15:04:51 LOG7[29814:49154]: 1 session cache timeouts 2005.02.16 15:04:51 LOG6[29814:49154]: SSL accepted: new session negotiated 2005.02.16 15:04:51 LOG6[29814:49154]: Negotiated ciphers: DES-CBC3-SHA SSLv3 Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1 2005.02.16 15:04:51 LOG7[29814:49154]: FD 13 in non-blocking mode 2005.02.16 15:04:51 LOG7[29814:49154]: mysql connecting 127.0.0.1:3306 2005.02.16 15:04:51 LOG7[29814:49154]: connect_wait: waiting 10 seconds 2005.02.16 15:04:51 LOG3[29814:49154]: connect_wait: getsockopt: Connection refused (111) 2005.02.16 15:04:51 LOG3[29814:49154]: Failed to initialize remote connection 2005.02.16 15:04:51 LOG7[29814:49154]: mysql finished (0 left) __________________________________ Do you Yahoo!? The all-new My Yahoo! - What will yours do? http://my.yahoo.com

1 0

Stunnel on Open-WRT..
by Andrew Frazer 16 Feb '05

16 Feb '05

I have got Stunnel running under Open-wrt, on a Linksys WRT54GS. However I don't seem to be able to get it to run the transparent mode.. (a) is it possible? (b) If the answer is no, would be possible to modifty either open-wrt or stunnel to make it work? Regards A.

1 0

Re: [stunnel-users] read sock return size 0 situation( it cause http web server to wait timeout for long time)
by Michal Trojnara 15 Feb '05

15 Feb '05

On 2005-01-18, at 02:43, Stanley wrote: > 1.In our case, the web server sent TCP fin,ack to stunnel > but the stunnel just sent TCP ack, so it is TCP half close. > 2.The stunnel use read() function that try to read more data from > sock_fd > but return 0(EOF) because TCP half close. > 3.At this moment, the stunnel call SSL_shutdown() function > that sent close_notify alert but a broswer(IE6 or firefox1.0) return > no message. > > I just modify stunnel 4.07 client.c to set sock_wr=0 > that will close TCP connection from stunnel to web server when read() > EOF. I'm NOT going to break SSL protocol in stunnel to support broken SSL clients. Use: TIMEOUTclose = 0 configuration option instead. Best regards, Mike

1 0

multiple stunnel client
by Manila, Dinesh - Contractor 15 Feb '05

15 Feb '05

Hi, I am working in a project, whereas the EMS application need to be secured while communicating with NE. To make it secure, we have decided to go with stunnel and openSSL. I have following questions while using stunnel in my application: 1. I read that stunnel limits the number of clients to be connected to 125. Can I increase this number. If so, by increasing this number, what is the implication in performance of stuunel. 2. Since my EMS is capable of managing more than 1000 NEs, I would want to have multiple stunnel client running on the same workstation. Is this possible to have multiple stuunel process running on the same server. if so, how should my stunnle.conf file look like. I appreciate greatly, If I could get the answers for the above queries. Thanks and Regards, Dinesh Wipro Technologies. Bangalore.

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users