stunnel-users

2 participants
3307 discussions

Benchmarks
by Michal Trojnara 17 Dec '06

17 Dec '06

Dear Users, I have updated stunnel performance benchmarks: http://stunnel.mirt.net/perf.html I hope you'll find them useful. The funny thing I currently have 2 hardware accelerator cards, but none of them works: - one of them is too obsolete and its proprietary drivers are no longer available; - the other one is too modern and its PCI-X slot does not work with my ASUS P5WDG2 WS Professional motherboard. I'm pretty sure most users won't even be able to utilize the performance provided by software implementation. The bottleneck will most likely be network connection or the destination server performance. Best regards, Mike

1 0

service reconfiguration by SIGHUP
by Matthew Eaton 15 Dec '06

15 Dec '06

Hi, I've created a patch to Stunnel that reloads all accepting connections from the config file. This will not work for privileged ports in the current implementation. Test at your own risk :) Feedback welcome. Best regards, Matthew diff -urb stunnel-orig/stunnel-4.20/src/stunnel.c stunnel-4.20/src/stunnel.c --- stunnel-orig/stunnel-4.20/src/stunnel.c 2006-11-30 15:47:45.000000000 -0500 +++ stunnel-4.20/src/stunnel.c 2006-12-12 03:34:36.000000000 -0500 @@ -53,12 +53,12 @@ #endif int volatile num_clients=0; /* Current number of clients */ +int volatile conf_updated=0; /* Conf updated ? */ /* Functions */ #ifndef USE_WIN32 int main(int argc, char* argv[]) { /* execution begins here 8-) */ - main_initialize(argc>1 ? argv[1] : NULL, argc>2 ? argv[2] : NULL); signal(SIGPIPE, SIG_IGN); /* avoid 'broken pipe' signal */ @@ -78,12 +78,17 @@ } #endif +char *cfg_arg1 = NULL; +char *cfg_arg2 = NULL; + void main_initialize(char *arg1, char *arg2) { ssl_init(); /* initialize SSL library */ sthreads_init(); /* initialize critical sections & SSL callbacks */ parse_config(arg1, arg2); log_open(); stunnel_info(0); + cfg_arg1 = arg1; + cfg_arg2 = arg2; } void main_execute(void) { @@ -105,6 +110,7 @@ SOCKADDR_UNION addr; s_poll_set fds; LOCAL_OPTIONS *opt; + int i; get_limits(); s_poll_zero(&fds); #if !defined(USE_WIN32) && !defined(USE_OS2) @@ -173,6 +179,42 @@ accept_connection(opt); } + if(conf_updated) { + for(i=0; i<fds.nfds; i++) + close(fds.ufds[i].fd); + + /* re-bind local ports */ + for(opt=local_options.next; opt; opt=opt->next) { + if(!opt->option.accept) /* no need to bind this service */ + continue; + memcpy(&addr, &opt->local_addr.addr[0], sizeof(SOCKADDR_UNION)); + if((opt->fd=socket(addr.sa.sa_family, SOCK_STREAM, 0))<0) { + sockerror("local socket"); + exit(1); + } + if(alloc_fd(opt->fd)) + exit(1); + if(set_socket_options(opt->fd, 0)<0) + exit(1); + s_ntop(opt->local_address, &addr); + if(bind(opt->fd, &addr.sa, addr_len(addr))) { + s_log(LOG_ERR, "Error binding %s to %s", + opt->servname, opt->local_address); + sockerror("bind"); + exit(1); + } + s_log(LOG_DEBUG, "%s bound to %s", opt->servname, opt->local_address); + if(listen(opt->fd, 5)) { + sockerror("listen"); + exit(1); + } +#ifdef FD_CLOEXEC + fcntl(opt->fd, F_SETFD, FD_CLOEXEC); /* close socket in child execvp */ +#endif + s_poll_add(&fds, opt->fd, 1, 0); + } + conf_updated = 0; + } } s_log(LOG_ERR, "INTERNAL ERROR: End of infinite loop 8-)"); } @@ -413,9 +455,16 @@ } static void signal_handler(int sig) { /* signal handler */ + if((sig==SIGHUP) && local_options.next) { /* only in service mode */ + s_log(LOG_NOTICE, "Re-reading configuration"); + parse_config(cfg_arg1, cfg_arg2); + conf_updated = 1; + } + else { s_log(sig==SIGTERM ? LOG_NOTICE : LOG_ERR, "Received signal %d; terminating", sig); exit(3); + } } #endif /* !defined USE_WIN32 */

1 2

stunnel patch to support URL lookups for parameters (take 2)
by Dan Jakubiec 13 Dec '06

13 Dec '06

Attached is a patch which extends the "connect=" and "CApath=" options to allow these parameters to be obtained dynamically at connect-time via a URL lookup, rather than statically from the stunnel configuration file. It is a generalization of an earlier patch to 4.04 submitted by Jan Piet-Mens which does something similar using LDAP lookups. Feedback is appreciated! Here is a summary of the functionality, along with some notes: 1. The patch was written to allow stunnel to dynamically route and authenticate incoming connections based on parameters found in the client's certificate. 2. Routing and authentication information is obtained by issuing a URL lookup, so the information can be obtained from a variety of local or remote sources. 3. It is particularly useful in high-volume, load-balancing scenarios where many copies of stunnel are running on multiple front-end servers. It allows the destination socket and client certificate verification info to be obtained on-the-fly from a centralized database. 4. Although primarily intended for use with HTTP, this patch uses the libcurl URL library and should work with all of its supported protocols: HTTP, HTTPS, FTP, FTPS, TFTP, DICT, TELNET, LDAP or FILE. As a brief example, an end-user might configure their stunnel as follows: cert = id.pem verify = 2 CApath = ca_dir CAlookup = http://database.stunnel.org/map_client.php?hash=%h [dynamic] accept = 50000 connect = @http://database.stunnel.org/map_client.php?common_name=%n In this scenario, an incoming stunnel connection would obtain it's connect info from database.stunnel.org by sending an HTTP request and passing the common name found in the client certificate. Similarly, the client's certificate would be verified using CA certificates obtained via HTTP lookup to the same host. Comments are appreciated. Thanks, Dan Jakubiec

1 0

stunnel patch to support URL lookups for parameters
by Dan Jakubiec 13 Dec '06

13 Dec '06

Attached is a patch which extends the "connect=" and "CApath=" options to allow these parameters to be obtained dynamically at connect-time via a URL lookup, rather than statically from the stunnel configuration file. It is a generalization of an earlier patch to 4.04 submitted by Jan Piet-Mens which does something similar using LDAP lookups. Feedback is appreciated! Here is a summary of the functionality, along with some notes: 1. The patch was written to allow stunnel to dynamically route and authenticate incoming connections based on parameters found in the client's certificate. 2. Routing and authentication information is obtained by issuing a URL lookup, so the information can be obtained from a variety of local or remote sources. 3. It is particularly useful in high-volume, load-balancing scenarios where many copies of stunnel are running on multiple front-end servers. It allows the destination socket and client certificate verification info to be obtained on-the-fly from a centralized database. 4. Although primarily intended for use with HTTP, this patch uses the libcurl URL library and should work with all of its supported protocols: HTTP, HTTPS, FTP, FTPS, TFTP, DICT, TELNET, LDAP or FILE. As a brief example, an end-user might configure their stunnel as follows: cert = id.pem verify = 2 CApath = ca_dir CAlookup = http://database.stunnel.org/map_client.php?hash=%h <http://database.stunnel.org/map_client.php?hash=%25h> [dynamic] accept = 50000 connect = @http://database.stunnel.org/map_client.php?common_name=%n<http://database.stunnel.org/map_client.php?common_name=%25n> In this scenario, an incoming stunnel connection would obtain it's connect info from database.stunnel.org by sending an HTTP request and passing the common name found in the client certificate. Similarly, the client's certificate would be verified using CA certificates obtained via HTTP lookup to the same host. Comments are appreciated. Thanks, Dan Jakubiec

1 0

Re: [stunnel-users] service reconfiguration by SIGHUP
by Hans Werner Strube 13 Dec '06

13 Dec '06

Matthew Eaton wrote: > I've created a patch to Stunnel that reloads all accepting connections > from the config file. This will not work for privileged ports in the > current implementation. Please explain why it will not work for privileged ports. Does this hold even if the master stunnel process runs as root? And what happens to active connections on SIGHUP? Are they simply broken?

2 1

Re: [stunnel-users] STunnel performance Issues
by Michal Trojnara 11 Dec '06

11 Dec '06

"Jones Scott - sjones" <Scott.Jones(a)acxiom.com> wrote: > But during load testing the system starts breaking down. It takes about > 1/5 the load to break down apache and stunnel, than directly against my > jboss node. Could you elaborate on "break down", please? Is there an error? A core dump? What is the error message? A core dump stack backtrace? First performance recommendation is to disable libwrap support: ./configure --disable-libwrap && make clean && make && make install Best regards, Mike

1 0

STunnel performance Issues
by Jones Scott - sjones 11 Dec '06

11 Dec '06

I am having problems will apache and stunnel being able to handle load. I am using stunnel to encrypt my ajp traffic from apache to jboss. This helps me bridge our internal firewall. But during load testing the system starts breaking down. It takes about 1/5 the load to break down apache and stunnel, than directly against my jboss node. Any performance tuning recommendations would be great. I am using stunnel straight out of the box. I will place the configuration file below. Thanks. ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Please make sure you understand them (especially the effect of chroot jail) ; Certificate/key is needed in server mode and optional in client mode ;cert = /usr/local/stunnel/etc/stunnel/mail.pem ;key = /usr/local/stunnel/etc/stunnel/mail.pem ; Protocol version (all, SSLv2, SSLv3, TLSv1) sslVersion = SSLv3 ; Some security enhancements for UNIX systems - comment them out on Win32 chroot = /usr/local/stunnel/var/lib/stunnel/ setuid = nobody setgid = nogroup ; PID is created inside chroot jail pid = /stunnel.pid ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ;compression = rle ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ; CApath is located inside chroot jail CApath = certificates ; It's often easier to use CAfile CAfile = /usr/local/stunnel/etc/stunnel/certs.pem ; Don't forget to c_rehash CRLpath ; CRLpath is located inside chroot jail ;CRLpath = /crls ; Alternatively you can use CRLfile ;CRLfile = /usr/local/stunnel/etc/stunnel/crls.pem ; Some debugging stuff useful for troubleshooting ;debug = 7 output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [ajp] accept = 8009 connect = xxxx2:8009 [sql] accept = 1433 connect = XXXX1:443 *************************************************************************** The information contained in this communication is confidential, is intended only for the use of the recipient named above, and may be legally privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please resend this communication to the sender and delete the original message or any copy of it from your computer system. Thank You. ****************************************************************************

1 0

SSL_accept: Peer suddenly disconnected
by James Brown 08 Dec '06

08 Dec '06

I'm trying to send an email through stunnel (which is running on the mail server), but I keep getting an error. $ sudo /usr/local/sbin/stunnel 2006.12.07 15:35:27 LOG7[6092:2684407744]: Snagged 64 random bytes from /Users/jlbrown/.rnd 2006.12.07 15:35:27 LOG7[6092:2684407744]: Wrote 1024 new random bytes to /Users/jlbrown/.rnd 2006.12.07 15:35:27 LOG7[6092:2684407744]: RAND_status claims sufficient entropy for the PRNG 2006.12.07 15:35:27 LOG7[6092:2684407744]: PRNG seeded successfully 2006.12.07 15:35:27 LOG7[6092:2684407744]: Certificate: /etc/postfix/ smtpd.cert 2006.12.07 15:35:27 LOG7[6092:2684407744]: Certificate loaded 2006.12.07 15:35:27 LOG7[6092:2684407744]: Key file: /etc/postfix/ smtpd.key 2006.12.07 15:35:27 LOG7[6092:2684407744]: Private key loaded 2006.12.07 15:35:27 LOG7[6092:2684407744]: SSL context initialized for service ssmtp 2006.12.07 15:35:27 LOG5[6092:2684407744]: stunnel 4.19 on i686-apple- darwin8.8.1 with OpenSSL 0.9.7l 28 Sep 2006 2006.12.07 15:35:27 LOG5[6092:2684407744]: Threading:PTHREAD SSL:ENGINE Sockets:SELECT,IPv4 Auth:LIBWRAP 2006.12.07 15:35:27 LOG6[6092:2684407744]: file ulimit = 256 (can be changed with 'ulimit -n') 2006.12.07 15:35:27 LOG6[6092:2684407744]: FD_SETSIZE = 1024 (some systems allow to increase this value) 2006.12.07 15:35:27 LOG5[6092:2684407744]: 125 clients allowed 2006.12.07 15:35:27 LOG7[6092:2684407744]: FD 6 in non-blocking mode 2006.12.07 15:35:27 LOG7[6092:2684407744]: FD 7 in non-blocking mode 2006.12.07 15:35:27 LOG7[6092:2684407744]: FD 8 in non-blocking mode 2006.12.07 15:35:27 LOG7[6092:2684407744]: SO_REUSEADDR option set on accept socket 2006.12.07 15:35:27 LOG7[6092:2684407744]: ssmtp bound to 0.0.0.0:465 2006.12.07 15:35:27 LOG7[6093:2684407744]: Created pid file /usr/ local/var/run/stunnel/stunnel.pid 2006.12.07 15:35:52 LOG7[6093:2684407744]: ssmtp accepted FD=9 from 192.168.1.4:62929 2006.12.07 15:35:52 LOG7[6093:25188864]: ssmtp started 2006.12.07 15:35:52 LOG7[6093:25188864]: FD 9 in non-blocking mode 2006.12.07 15:35:52 LOG7[6093:25188864]: TCP_NODELAY option set on local socket 2006.12.07 15:35:52 LOG7[6093:25188864]: FD 10 in non-blocking mode 2006.12.07 15:35:52 LOG7[6093:25188864]: FD 11 in non-blocking mode 2006.12.07 15:35:52 LOG7[6093:25188864]: Connection from 192.168.1.4:62929 permitted by libwrap 2006.12.07 15:35:52 LOG7[6093:2684407744]: Cleaning up the signal pipe 2006.12.07 15:35:52 LOG5[6093:25188864]: ssmtp accepted connection from 192.168.1.4:62929 2006.12.07 15:35:52 LOG6[6093:2684407744]: Child process 6094 finished with code 0 2006.12.07 15:35:52 LOG7[6093:25188864]: SSL state (accept): before/ accept initialization 2006.12.07 15:35:52 LOG7[6093:25188864]: SSL state (accept): SSLv3 read client hello A 2006.12.07 15:35:52 LOG7[6093:25188864]: SSL state (accept): SSLv3 write server hello A 2006.12.07 15:35:52 LOG7[6093:25188864]: SSL state (accept): SSLv3 write certificate A 2006.12.07 15:35:52 LOG7[6093:25188864]: SSL state (accept): SSLv3 write server done A 2006.12.07 15:35:52 LOG7[6093:25188864]: SSL state (accept): SSLv3 flush data 2006.12.07 15:35:52 LOG3[6093:25188864]: SSL_accept: Peer suddenly disconnected 2006.12.07 15:35:52 LOG5[6093:25188864]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.12.07 15:35:52 LOG7[6093:25188864]: ssmtp finished (0 left) My stunnel.conf is: cert = /etc/postfix/smtpd.cert key = /etc/postfix/smtpd.key sslVersion = all socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = /var/log/stunnel.log [ssmtp] client = no accept = 465 connect = 25 Does this mean that the SMTP proxy listening on port 25 is not accepting the connection from stunnel? Thanks, James.

2 4

Installing stunnel without need a compiler
by Boxall, John 05 Dec '06

05 Dec '06

Mike et al, I want to be able to automate the installation of stunnel in the same manner that I've already automated our openssh installation, however, I've run into a problem (lack of knowledge) with the "make install" step. This is for Solaris (2.5.1 to 10) and AIX (5.1 to 5.3). I'm not quite ready to create the packages in either Solaris (pkg) or AIX (rpm) formats. At a high level, here is what I would like to achieve: - On a build server (per OS version) - transfer all of the necessary stuff (gcc, openssl, stunnel source, etc.) - install the necessary stuff (gcc, openssl, etc.) - un'tar the stunnel package - run configure (with the appropriate options and paths) - run "make" - tar the stunnel directory & transfer it to a holding system - Put together the necessary pieces on the holding system to install stunnel on all targets. - On a target system (per OS version) - transfer all of the necessary stuff (libgcc, openssl, tar'ed stunnel directory, etc.) - install the necessary stuff (libgcc, openssl, zlib, etc.) - un-tar the stunnel file - run "make install" Using the same flow with our openssh packages, I do not have to install a compiler (gcc) and its support packages. What, if anything, can I do with the stunnel installation to not have to install a compiler? Regards, John Boxall

2 1

Re: [stunnel-users] Win: sometines don't connect
by Miroslav Geisselreiter 04 Dec '06

04 Dec '06

Hi My comments inline .... >>>>>> Miroslav Geisselreiter <mg(a)intar.cz> 12/01/06 8:04 PM >>> <SNIP> someotherpc config is here: service = stunnel cert = stunnel.pem CAfile = cacerts.pem socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 verify = 3 taskbar = yes [VNC] accept = 5600 connect = localhost:5900 I doubt how the "connect" option can be configured like this? should n't it be "connect = <yourfirstPC>:5900" and the accpet option should be "somotherpc:5600" <SNIP> Hope this helps! Regards Prem I think it is correct. On the first PC stunnel listens on localhost:5900 and passes securelly to second PC to port 5600. VNC on first PC connect to localhost port 5900. On the second PC stunnel accepts connection from any PC on port 5600 and passes to localhost (still second PC) to port 5900. VNC on second PC listens on port 5900. Miroslav Geisselreiter -- Odchozi zprava neobsahuje viry. Zkontrolovano AVG. Verze: 7.5.432 / Virova baze: 268.15.6/566 - datum vydani: 3.12.2006 16:36

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users