stunnel-users

2 participants
3307 discussions

Re: stunnel 5-15 minute outages
by Eberhard 04 Feb '22

04 Feb '22

I will give you strange advice assuming you are on Unix of some flavor. Use inetd. It always works or the O/S does not work 😊 It then becomes the actual server and a new instance of stunnel is fired for every connection. I use it because it is the most reliable way and takes no server software management. There is an old argument against this – it is in theory has less performance when a correction is created. I say theoretical as modern computers are so fast that creating a process millions of times does not stress a machine. I run 100s of millions of connections daily on a single computer and have zero performance issues. I also have zero issues like you described and I always had them before. Even if you do have an issue it would only affect one connection. Because each connection is unique. From your description it is the server process having an issue or perhaps some of the children not getting “clean” as they keep them running in a loop. With inetd it does it’s business and ends. There are no cross-connection or server issues. I give this advice several times a year and may ¼ take it and thank me. The rest mock the idea citing the theoretical performance difference (without even trying it) and continue to struggle. This is not just an issue with this version. Many versions have had trouble with running in a loop like that – memory management, variables not cleared, etc. And remember openssl is tied to this as well. The other thing I would recommend (also weird) is using static links. That way an install of say a new openssl (where your encryption issue appears to be now) won’t affect you. There is no way anyone is testing the software with every version of every O/S with every version of openssl. If you do a static link and have a working version, no need to change. Until a new TLS comes out or something but you can control that well when you have a static link. And that, BTW, theoretically loads faster. The program is much bigger but in need not load dynamic libraries from all over the place when it is fired up. Let me know what you find out and do 😊 E VICS, LLC Eric S Eberhard 2933 W Middle Verde Rd Camp Verde, AZ 86322 928-567-3727 (land line) 928-301-7537 (cell phone) <http://www.vicsmba.com/> http://www.vicsmba.com <https://www.facebook.com/groups/286143052248115> https://www.facebook.com/groups/286143052248115 From: Steve Clement <steve3279(a)gmail.com> Sent: Friday, February 4, 2022 4:52 AM To: stunnel-users(a)stunnel.org Subject: [stunnel-users] stunnel 5-15 minute outages Hello, I have been working on an issue that seems a lot like this one: https://www.stunnel.org/pipermail/stunnel-users/2011-January/002898.html We are running stunnel 5.56 and it has been working with no issues until November. Since November there have been 6 short 5-15 minute outages where we see network traffic between client and server in the packet captures, but stunnel logs stop during this period. Everything recovers on its own after this brief outage. I am looking for help in what to look for to explain this. Feb 2 14:49:29 *host* stunnel: LOG5[22565874]: Connection closed: 83 byte(s) sent to TLS, 74 byte(s) sent to socket Feb 2 15:00:36 *host* stunnel: LOG6[2705685]: Peer certificate not required We usually see dozens of messages every second, so to have an 11 minute gap in the logs is unusual. Any help would be appreciated, thank you. -- Steve Clement steve3279(a)gmail.com <mailto:[email protected]> 614-632-7380

2 1

Use Stunnel with CMD
by gilaguigui＠gmail.com 02 Feb '22

02 Feb '22

Hi, I am trying to use stunnel with CMD (as a service) I get pop up message for each command (service installed \ service stopped etc.) the command in CMD: stunnel.exe -install\ -uninstall.... how can I disable it? run stunnel with no pop up? thanks GG.

1 0

New to stunnel! Need help connecting to a REST API
by Tim Townsend 18 Jan '22

18 Jan '22

Hello! I need help! We have an integration from an ERP package to a REST API (Avatax) that will soon be requiring TLS 1.2 connections. Our tech platform does not have built-in support for TLS 1.2, so I'm hoping to be able to use stunnel to make that happen. Where do I start? What would the conf file section look like for this? I don't see this directly discussed in the documentation. Any help appreciated! [cid:[email protected]] Tim Townsend Programmer Earnest & Associates * Profitability Improvement Specialists Voice: 410.766.6076<tel:+14107666076> ext 210 Email: tim.townsend(a)earnestassoc.com<mailto:[email protected]> * Web: earnestassoc.com<http://www.earnestassoc.com/>

1 0

stunnel 5.62 released
by Michał Trojnara 17 Jan '22

17 Jan '22

Dear Users, I have released version 5.62 of stunnel. ### Version 5.62, 2022.01.17, urgency: MEDIUM * New features - Added a bash completion script. * Bugfixes - Fixed a transfer() loop bug. Home page: https://www.stunnel.org/ Download: https://www.stunnel.org/downloads.html SHA-256 hashes: 9cf5bb949022aa66c736c1326554cca27d0641605a6370274edc4951eb5bd339 stunnel-5.62.tar.gz fbfcc5759344bcafff9ff3bc6cf56c7fb75cb1244b76d4934c5d9a3eb7eee32d stunnel-5.62-win64-installer.exe 4b52ed6e4bb8293fdefb10ee8c271400a8c1749254a11b674ff690eae00b3c5e stunnel-5.62-android.zip Best regards, Mike

1 0

Re: stunnel 5.61transfer() loop executes not transferring any data Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket inetd mode
by Roberto CORRADO 17 Jan '22

17 Jan '22

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Mike, Good job! Stunnel 5.62 beta 1 work fine! """ 2022.01.16 22:08:47 LOG6[ui]: Initializing inetd mode configuration 2022.01.16 22:08:47 LOG5[ui]: stunnel 5.62 on i586-slackware-linux-gnu platform 2022.01.16 22:08:47 LOG5[ui]: Compiled/running with OpenSSL 1.1.1m 14 Dec 2021 2022.01.16 22:08:47 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,OCSP,PSK,SNI Auth:LIBWRAP 2022.01.16 22:08:47 LOG6[ui]: Initializing inetd mode configuration 2022.01.16 22:08:47 LOG5[ui]: Reading configuration from file /etc/stunnel/imaps.conf 2022.01.16 22:08:47 LOG5[ui]: UTF-8 byte order mark not detected 2022.01.16 22:08:47 LOG5[ui]: FIPS mode disabled 2022.01.16 22:08:47 LOG6[ui]: Compression enabled: 0 methods 2022.01.16 22:08:47 LOG6[ui]: stunnel default security level set: 2 2022.01.16 22:08:47 LOG6[ui]: Session resumption enabled 2022.01.16 22:08:47 LOG6[ui]: Loading certificate from file: /etc/stunnel/stunnel.pem 2022.01.16 22:08:47 LOG6[ui]: Certificate loaded from file: /etc/stunnel/stunnel.pem 2022.01.16 22:08:47 LOG6[ui]: Loading private key from file: /etc/stunnel/stunnel.pem 2022.01.16 22:08:47 LOG6[ui]: Private key loaded from file: /etc/stunnel/stunnel.pem 2022.01.16 22:08:47 LOG6[ui]: DH initialization needed for DHE-RSA-AES256-GCM-SHA384 2022.01.16 22:08:47 LOG6[ui]: 4096-bit DH parameters loaded 2022.01.16 22:08:47 LOG5[ui]: Configuration successful 2022.01.16 22:08:47 LOG5[0]: Service [stunnel] accepted connection from 10.19.79.235:41136 2022.01.16 22:08:47 LOG6[0]: Peer certificate not required 2022.01.16 22:08:47 LOG6[0]: No peer certificate received 2022.01.16 22:08:47 LOG6[0]: Session id: 65640462303D0DA1CD16CAB4977F22B04FFB74693150104FC69AB9FBDC48AED9 2022.01.16 22:08:47 LOG6[0]: No peer certificate received 2022.01.16 22:08:47 LOG6[0]: Session id: B9505D917FA6F2E9C8A0EF14D6E4B01C3ED54599271D93E325ED7412CA2AC5F3 2022.01.16 22:08:47 LOG6[0]: TLS accepted: new session negotiated 2022.01.16 22:08:47 LOG6[0]: TLSv1.3 ciphersuite: TLS_AES_256_GCM_SHA384 (256-bit encryption) 2022.01.16 22:08:47 LOG6[0]: Peer temporary key: X25519, 253 bits 2022.01.16 22:08:47 LOG6[0]: Local mode child started (PID=16984) 2022.01.16 22:08:47 LOG6[0]: TLS closed (SSL_read) 2022.01.16 22:08:47 LOG6[0]: Read socket closed (readsocket) 2022.01.16 22:08:47 LOG6[0]: SSL_shutdown successfully sent close_notify alert 2022.01.16 22:08:47 LOG5[0]: Connection closed: 979 byte(s) sent to TLS, 128 byte(s) sent to socket """ Thanks a lot! - -Roberto -----BEGIN PGP SIGNATURE----- iEYEARECAAYFAmHkjDoACgkQWVOoL214ZeGntwCbBtV1G/J2uThR06ftFC+F2XTP KeQAnjnCTOrk26zzcsNsCOQoWg54MWhD =alm2 -----END PGP SIGNATURE----- ----- Original Message ----- Sent: Sunday, January 16, 2022 9:52 PM Michał Trojnara wrote: > Hi Roberto, > > Could you try https://www.stunnel.org/downloads/beta/stunnel-5.62b1.tar.gz ? > > Best regards, > Mike

2 1

I NEED A HELP TO SETUP THE SSL/TLS EMAILS SUPPORT
by Muj 01 Jan '22

01 Jan '22

HI TECHNICAL SUPPORT, FIRSTLY, I AM APOLOGIZING TO YOU FOR WRITING WITH LARGE CAPS ONLY, IT IS BECAUSE RECENTLY I GOT A BRAIN STROKE AND AM NOT RECOVERED YET. AS FOR MY ISSUE, TO UNDERSTAND IT BETTER, THE FOLLOWING IS MY INFO. - I HAVE AN OLD WINDOWS-XP 32BIT OS. - I AM USING TERABYTE 2.99 TO BACKUP AND RESTORE MY OS, BUT LOOSING MANY EMAILS BECAUSE TERABYTE IS NO LONGER SUPPORTING 2.99 VERSION. THEY SUPPORT RESTORING ALL EMAILS BEGINNING FROM 3 VERSION. THEREFORE, THEY HAVE RECOMMENDED ME TO CONTACT YOU DIRECTLY. NOW WHAT I DID SO FAR. - I DOWNLOADED AND INSTALLED YOUR STUNNEL 4.53 - AFTER AUTOMATIC SETTING, EDITING STUNNEL.CONF FILE, MAKING SOME CHANGES IN IT AND SAVING IT, THE SERVER WENT DOWN. ATTACHED PLEASE FIND STUNNEL.CONF TXT FILE. - BECAUSE THE SERVER WENT DOWN, I TRIED TO DOWNLOAD AND INSTALL STUNNEL AGAIN, BUT ALWAYS GOT THE SAME ERROR MESSAGE.PLEASE CAN YOU HELP ME WITH THIS ISSUE? - I HAVE 3 POP3 EMAIL ACCOUNTS AND 1 IMAP. ALL REQUIRE A CONNECTION SECURITY SSL/TLS. *PLEASE, I NEED TO KNOW HOW **TO COMPLETELY REMOVE THE CURRENT STUNNEL PROGRAM AND AFTER THAT, WHAT STUNNEL VERSION I SHOULD **DOWNLOAD AGAIN **TO BE ABLE TO SET IT UP*. AFTER A SUCCESSFUL NEW INSTALLATION I WOULD GIVE YOU MORE NEEDED INFO FOR SETTING UP MY EMAILS. PLEASE LET ME KNOW IN YOUR BEST CONVENIENCE AND HAVE A BEAUTIFUL NEW YEAR 2022. KIND REGARDS, MARTIN

1 0

stunnel 5.61transfer() loop executes not transferring any data Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket inetd mode
by Roberto CORRADO 29 Dec '21

29 Dec '21

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 """ 2021.12.28 14:03:40 LOG6[ui]: Initializing inetd mode configuration 2021.12.28 14:03:40 LOG5[ui]: stunnel 5.61 on i586-slackware-linux-gnu platform 2021.12.28 14:03:40 LOG5[ui]: Compiled/running with OpenSSL 1.1.1m 14 Dec 2021 2021.12.28 14:03:40 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,OCSP,PSK,SNI Auth:LIBWRAP 2021.12.28 14:03:40 LOG6[ui]: Initializing inetd mode configuration 2021.12.28 14:03:40 LOG5[ui]: Reading configuration from file /etc/stunnel/imaps.conf 2021.12.28 14:03:40 LOG5[ui]: UTF-8 byte order mark not detected 2021.12.28 14:03:40 LOG5[ui]: FIPS mode disabled 2021.12.28 14:03:40 LOG6[ui]: Compression enabled: 0 methods 2021.12.28 14:03:40 LOG6[ui]: stunnel default security level set: 2 2021.12.28 14:03:40 LOG6[ui]: Session resumption enabled 2021.12.28 14:03:40 LOG6[ui]: Loading certificate from file: /etc/stunnel/stunnel.pem 2021.12.28 14:03:40 LOG6[ui]: Certificate loaded from file: /etc/stunnel/stunnel.pem 2021.12.28 14:03:40 LOG6[ui]: Loading private key from file: /etc/stunnel/stunnel.pem 2021.12.28 14:03:40 LOG6[ui]: Private key loaded from file: /etc/stunnel/stunnel.pem 2021.12.28 14:03:40 LOG6[ui]: DH initialization skipped: no DH ciphersuites 2021.12.28 14:03:40 LOG5[ui]: Configuration successful 2021.12.28 14:03:40 LOG5[0]: Service [stunnel] accepted connection from 127.0.0.1:40876 2021.12.28 14:03:40 LOG6[0]: Peer certificate not required 2021.12.28 14:03:40 LOG6[0]: No peer certificate received 2021.12.28 14:03:40 LOG6[0]: Session id: 0E092C2715D12901219C3E0F54DFA029F7C50040C7EC8F8C88211BA6883B9D1F 2021.12.28 14:03:40 LOG6[0]: No peer certificate received 2021.12.28 14:03:40 LOG6[0]: Session id: 26CFB9D13C499CE27C4ED1575FDF3FB2604C616418BA6068849B49EF75AF2162 2021.12.28 14:03:40 LOG6[0]: TLS accepted: new session negotiated 2021.12.28 14:03:40 LOG6[0]: TLSv1.3 ciphersuite: TLS_AES_256_GCM_SHA384 (256-bit encryption) 2021.12.28 14:03:40 LOG6[0]: Peer temporary key: X25519, 253 bits 2021.12.28 14:03:40 LOG6[0]: Local mode child started (PID=4997) 2021.12.28 14:03:40 LOG3[0]: transfer() loop executes not transferring any data 2021.12.28 14:03:40 LOG3[0]: please report the problem to Michal.Trojnara(a)stunnel.org 2021.12.28 14:03:40 LOG3[0]: stunnel 5.61 on i586-slackware-linux-gnu platform 2021.12.28 14:03:40 LOG3[0]: Compiled/running with OpenSSL 1.1.1m 14 Dec 2021 2021.12.28 14:03:40 LOG3[0]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,OCSP,PSK,SNI Auth:LIBWRAP 2021.12.28 14:03:40 LOG3[0]: protocol=TLSv1.3, SSL_pending=0, SSL_has_pending=0 2021.12.28 14:03:40 LOG3[0]: sock_open_rd=Y, sock_open_wr=Y 2021.12.28 14:03:40 LOG3[0]: SSL_RECEIVED_SHUTDOWN=n, SSL_SENT_SHUTDOWN=n 2021.12.28 14:03:40 LOG3[0]: sock_can_rd=n, sock_can_wr=n 2021.12.28 14:03:40 LOG3[0]: ssl_can_rd=n, ssl_can_wr=n 2021.12.28 14:03:40 LOG3[0]: read_wants_read=Y, read_wants_write=n 2021.12.28 14:03:40 LOG3[0]: write_wants_read=n, write_wants_write=Y 2021.12.28 14:03:40 LOG3[0]: shutdown_wants_read=n, shutdown_wants_write=n 2021.12.28 14:03:40 LOG3[0]: socket input buffer: 154 byte(s), TLS input buffer: 0 byte(s) 2021.12.28 14:03:40 LOG5[0]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket """ """ debug = info output = /var/log/stunnel-imaps.log cert = /etc/stunnel/stunnel.pem exec = /usr/sbin/imapd execargs = imapd sslVersion = all options = NO_SSLv2 options = NO_SSLv3 """ -----BEGIN PGP SIGNATURE----- iEYEARECAAYFAmHLE48ACgkQWVOoL214ZeFpYwCfe+qv09KWSfjNixhhcb5MJbr2 yAkAoKOyXZJwnKddSXYzIhbi7k1yPkoU =oGR+ -----END PGP SIGNATURE-----

1 0

Config to only listen when connect port is up
by roartysa＠gmail.com 23 Dec '21

23 Dec '21

Is there a config flag that can be set in the conf file that will tell stunnel to listen on the https accept port only when the connect port is up and listening? The issue i am trying to address is when a load balancer talks to a server, I need to make sure the port that stunnel redirects to is healthy. Right now the load balancer will send traffic to the port all the time regardless of the health of the port that stunnel redirects the traffic to.

2 1

stunnel 5.61 released
by Michał Trojnara 22 Dec '21

22 Dec '21

Dear Users, I have released version 5.61 of stunnel. ### Version 5.61, 2021.12.22, urgency: LOW * New features sponsored by the University of Maryland - Added new "protocol = capwin" and "protocol = capwinctrl" configuration file options. * New features for the Windows platform - Added client mode allowing authenticated users to view logs, reconfigure and terminate running stunnel services. - Added support for multiple GUI and service instances distinguised by the location of stunnel.conf. - Improved log window scrolling. - Added a new 'Pause auto-scroll' GUI checkbox. - Double click on the icon tray replaced with single click. - OpenSSL DLLs updated to version 3.0.1. * Other new features - Rewritten the testing framework in python (thx to Peter Pentchev for inspiration and initial framework). - Added support for missing SSL_set_options() values. - Updated stunnel.spec to support RHEL8. * Bugfixes - Fixed OpenSSL 3.0 build. - Fixed reloading configuration with "systemctl reload stunnel.service". - Fixed incorrect messages logged for OpenSSL errors. - Fixed printing IPv6 socket option defaults on FreeBSD. Home page: https://www.stunnel.org/ Download: https://www.stunnel.org/downloads.html SHA-256 hashes: 91ea0ca6482d8f7e7d971ee64ab4f86a2817d038a372f0893e28315ef2015d7a stunnel-5.61.tar.gz 19c5ff1f4101af1e69585328303c14249db2ec9063542101ca31edb6f6cc502f stunnel-5.61-win64-installer.exe 928ec94690564498bf523228946b2cdc90c7e346d6f0baf1f71b76cbe769b96c stunnel-5.61-android.zip Best regards, Mike

1 0

Log4j Vulnerability
by Tracy Drake - IQGC-C 17 Dec '21

17 Dec '21

Hello! Can you please tell me if Stunnel uses log4j and/or if it is vulnerable to it? Your feedback would be greatly appreciated! Thanks in advance! -- *TRACY DRAKE | CSM URSA/Infoconnect Training and Support* GSA COMET Hale Bopp Contract Work Phone: 704-253-5193 | Email: tracy.drake(a)gsa.gov

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users