stunnel-users

3 participants
3308 discussions

Re: [stunnel-users] telnetd and tcp_wrappers
by Spence, Thomas Civ 844 CS/SCOX 02 Jul '10

02 Jul '10

Hi Again, I tried: [tssl] accept = 992 exec = /usr/sbin/telnetd It works. When I log into the server with no problem. When I am ready to log off then the process stopped running??? How can it stays running in process (/usr/local/bin/stunnel)? Thanks. Tom -----Original Message----- From: Spence, Thomas Civ 844 CS/SCOX Sent: Thursday, July 01, 2010 11:53 AM To: 'stunnel-users(a)mirt.net' Subject: telnetd and tcp_wrappers Hi all.. They requested us to turn off the telnetd from inetd.conf and not allowing to use tcp_wrappers... We are still using stunnel 4.33... We can't connect our server from PC with PowerTerm WebConnect because telnetd is off. Is there any way for all users to connect the server by using PowerTerm WebConnect? stunnel.conf: [tssl] accept = 992 connect = 23 (can't use telnet port) I know I can't use "connect = 22" because it doesn't work. Any idea? I really need your help... --------------- Tom Spence

2 1

telnetd and tcp_wrappers
by Spence, Thomas Civ 844 CS/SCOX 01 Jul '10

01 Jul '10

Hi all.. They requested us to turn off the telnetd from inetd.conf and not allowing to use tcp_wrappers... We are still using stunnel 4.33... We can't connect our server from PC with PowerTerm WebConnect because telnetd is off. Is there any way for all users to connect the server by using PowerTerm WebConnect? stunnel.conf: [tssl] accept = 992 connect = 23 (can't use telnet port) I know I can't use "connect = 22" because it doesn't work. Any idea? I really need your help... --------------- Tom Spence

1 0

Re: [stunnel-users] Connecting to stunnel with SQLServer
by Mohit Anchlia 30 Jun '10

30 Jun '10

Has anyone else tried using Java SSL or anything using Java that will not require stunnel on the client side? On Fri, Jun 25, 2010 at 12:13 PM, Carter Browne <cbrowne(a)cbcs-usa.com> wrote: > On 6/24/2010 11:00 PM, Mohit Anchlia wrote: >> On Thu, Jun 24, 2010 at 10:27 AM, Carter Browne <cbrowne(a)cbcs-usa.com> wrote: >> >>> On 6/24/2010 12:09 PM, Mohit Anchlia wrote: >>> >>>> On Thu, Jun 24, 2010 at 5:14 AM, Carter Browne <cbrowne(a)cbcs-usa.com> wrote: >>>> >>>> >>>>> It is very easy to do if you have stunnel running on both ends. On the >>>>> client side in the configuration file you could have: >>>>> >>>>> [MSSQL-OUT] >>>>> accept = localhost:1433 >>>>> connect = remote:20000 >>>>> client = yes >>>>> >>>>> >>>> Thanks. So if I have stunnel running on both ends how do I connect to >>>> SQL server? Just open a JDBC connection on the local port and it will >>>> automatically connect on the remote side? >>>> >>>> >>> In this example, I would define an alias using the configuration manager >>> giving it your name for the data base, and having it connect to port >>> 1433 on localhost. For my systems, >>> I usually use a dummy name defined in the 127.0.0.0/8 net and some port >>> other than 1433. This approach does require stunnel on both ends. I >>> haven't tried any other approaches. >>> MS SQL server does have some options for encrypting the traffic as well >>> - I did not think they would work for my mixed Linux/Windows >>> environment, but it might work for your environment. >>> >>> >>> >>>> Also, are there any other options? We have 20 servers from which we >>>> need to connect. I was trying to avoid install of another binary and >>>> relying on it for being up and running. Is it possible to use Java >>>> SSL? Or is that too complicated and not proven to work? Not sure if >>>> there is any other option. >>>> >>>> >>>> >>>>> on the remote side have: >>>>> >>>>> [MSSQL-IN] >>>>> accept = 20000 >>>>> connect = 1433 >>>>> client = no >>>>> >>>>> In this example port 20000 would have to be open to any firewalls >>>>> including the Windows firewall and assumes you are using the standard >>>>> MSSQL port on the server. >>>>> >>>>> You would probably want to use the SQL Server Configuration Manager on >>>>> the client computer to add an alias for your data base. >>>>> >>>>> >> Our client will be on Linux box. I am trying to understand if I am >> using JDBC the connection URL is something like: >> >> jdbc:sqlserver://[serverName[\instanceName][:portNumber]][;property=value[;property=value]] >> >> So if I use stunnel on both sides then how will this work? What will I >> give in my connection string? >> > > I don't have a Java DB connection, so I cannot speak from experience. > For both the Windows and the Linux ODBC drivers, using the example above > the server name would be > localhost:1433. The Instance name and any properties that you send > would not change. Again, using the values in the example, stunnel is > simply mapping localhost:1433 to remote:1433. > > Carter >> >>>>> Carter >>>>> >>>>> Carter Browne >>>>> CBCS >>>>> cbrowne(a)cbcs-usa.com >>>>> 781-721-2890 >>>>> >>>>> >>>>> On 6/23/2010 11:32 PM, Mohit Anchlia wrote: >>>>> >>>>> >>>>>> We have a requirement to connect to a SQLServer that is connected >>>>>> through stunnel on the other end. Can I use java SSL to talk to >>>>>> stunnel? What are my options? >>>>>> _______________________________________________ >>>>>> stunnel-users mailing list >>>>>> stunnel-users(a)mirt.net >>>>>> http://stunnel.mirt.net/mailman/listinfo/stunnel-users >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>> >>> >> >

1 1

stunnel question and behaviour
by eni-urgence 25 Jun '10

25 Jun '10

Hello all. I want to use stunnel as ssl terminatation for https and pass httpd request to haproxy. I have compiled stunnel (source http://www.stunnel.org/download/stunnel/src/stunnel-4.32.tar.gz ) and apply this patch http://haproxy.1wt.eu/download/patches/stunnel-4.32-xforwarded-for.diff. I have placed the binary in /usr/local/bin . I want to use the heartbeat capabilities and start stunnel only if VIP is on the node. In order to make that, the init script of stunnel must be LSB compatible like said http://www.linux-ha.org/LSBResourceAgent. When i made a /etc/init.d/stunnel stop then a /etc/init.d/stunnel start, the service wont start . in order to reproduce make a //etc/init.d/stunnel start/ /ps -ef/ said stunnel 30301 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30302 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30303 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30304 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30305 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30306 1 0 13:21 ? 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf Is it normal there is many process of stunnel ? And only the last pid process with ? in place of pts/2 is on the pid file. //etc/init.d/stunnel stop/ /ps -ef /said /stunnel 30306 1 0 13:21 ? 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf/ /and / //etc/init.d/stunnel start/ / DÃ©marrage de stunnel :Reading configuration from file /etc/stunnel/stunnel.conf FIPS mode disabled RAND_status claims sufficient entropy for the PRNG PRNG seeded successfully Certificate: /path_to_mycrt Certificate loaded Key file: /path_to_my_key Private key loaded SSL context initialized for servicemy_domaine_name Configuration successful No limit detected for the number of clients FD=9 in non-blocking mode FD=10 in non-blocking mode FD=11 in non-blocking mode Option SO_REUSEADDR set on accept socket Error binding secure.scan-prod.com to 192.168.100.156:443 bind: Address already in use (98)/ return code 1 after stop there is a remaining stunnel process. It appears that this process is the one which the pid had been added to pidfile a /file /usr/local/bin/stunnel /said //usr/local/bin/stunnel: ELF 64-bit LSB executable, AMD x86-64, version 1 (SYSV), for GNU/Linux 2.6.9, dynamically linked (uses shared libs), for GNU/Linux 2.6.9, stripped/ /usr/local/bin/stunnel -version said /stunnel 4.32 on x86_64-unknown-linux-gnu with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008/ /Threading:PTHREAD SSL:ENGINE,FIPS Sockets:POLL,IPv6 Auth:LIBWRAP/ /Global options/ /debug = daemon.notice/ /pid = /usr/local/var/run/stunnel/stunnel.pid/ /RNDbytes = 64/ /RNDfile = /dev/urandom/ /RNDoverwrite = yes/ /Service-level options/ /cert = /usr/local/etc/stunnel/stunnel.pem/ /ciphers = FIPS/ /session = 300 seconds/ /stack = 65536 bytes/ /sslVersion = TLSv1/ /TIMEOUTbusy = 300 seconds/ /TIMEOUTclose = 60 seconds/ /TIMEOUTconnect = 10 seconds/ /TIMEOUTidle = 43200 seconds/ /verify = none/ my stunnel.conf is like that /; Protocol version (all, SSLv2, SSLv3, TLSv1)/ /sslVersion = all/ /setuid = stunnel/ /setgid = stunnel/ /chroot = /var/chroot/stunnel/ /pid = /var/run/stunnel.pid/ /output = /var/log/stunnel.log/ /debug = 5/ /fips = no/ /socket=l:TCP_NODELAY=1/ /socket=r:TCP_NODELAY=1/ /[my_domain]/ /key = /path_to_my_key/ /cert = /path_to_mycrt/ /accept = 192.168.100.156:443/ /connect = 192.168.100.156:10443/ /xforwardedfor = yes/ /TIMEOUTclose = 0 Thanks for your help /

1 0

stunnel and heartbeat
by eni-urgence 25 Jun '10

25 Jun '10

1 0

error during multithreaded operation
by Bhavna Jhunjhunwala 24 Jun '10

24 Jun '10

Hi Users, I am having the same problem as listed in below thread. Is there a resolution? Appreciate any help in this matter! http://stunnel.mirt.net/pipermail/stunnel-users/2009-April/002353.html open ssl version: OpenSSL 0.9.8k 25 Mar 2009 stunnel version: stunnel -version stunnel 4.33 on i386-apple-darwin10.2.0 with OpenSSL 0.9.8k 25 Mar 2009 Threading:PTHREAD SSL:ENGINE Sockets:SELECT,IPv6 Auth:LIBWRAP Global options debug = daemon.notice pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = ALL:!aNULL:!eNULL:!SSLv2 session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none -- Thanks, Bhavna Quantitative Brokers DISCLAIMER: This e-mail and any attachments are for the confidential use of the intended recipient. If you are not the intended recipient of this message you are hereby notified that any review, dissemination, distribution or copying of this message is strictly prohibited. This communication is for information purposes only and should not be regarded as an offer to sell or as a solicitation of an offer to buy any investment product, an official confirmation of any transaction or an official statement of Quantitative Brokers, LLC. E-mail transmissions cannot be guaranteed to be secure or error-free. Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such. All information is subject to change without notice. Quantitative Brokers may, at its discretion, monitor and review the content of all e-mail communications.

1 0

Connecting to stunnel with SQLServer
by Mohit Anchlia 24 Jun '10

24 Jun '10

We have a requirement to connect to a SQLServer that is connected through stunnel on the other end. Can I use java SSL to talk to stunnel? What are my options?

1 0

transfer() loop executes not transferring any data
by Nelson 22 Jun '10

22 Jun '10

I just setup stunnel to partner with haproxy to handle https. My concern is I saw the logs below on my stunnel logs. I don't know if I need to worry about this since my testing using https is doing fine. stunnel is forwarding https request to haproxy. 2010.06.22 07:57:27 LOG3[1363:2083728]: transfer() loop executes not transferring any data 2010.06.22 07:57:27 LOG3[1363:2083728]: please report the problem to Michal.Trojnara(a)mirt.net 2010.06.22 07:57:27 LOG3[1363:2083728]: protocol=TLSv1, check_SSL_pending=no 2010.06.22 07:57:27 LOG3[1363:2083728]: socket open: rd=yes wr=no, ssl open: rd=no wr=yes 2010.06.22 07:57:27 LOG3[1363:2083728]: socket ready: rd=no wr=no, ssl ready: rd=yes wr=no 2010.06.22 07:57:27 LOG3[1363:2083728]: wants: SSL_read rd=no wr=no, SSL_write rd=no wr=yes, SSL_shutdown rd=no wr=no 2010.06.22 07:57:27 LOG3[1363:2083728]: socket input buffer: 16384 byte(s), ssl input buffer: 0 byte(s) Thanks, Nelson

1 0

"choose a digital certificate" pop-up in IE
by KumpelJ 21 Jun '10

21 Jun '10

Hello I have browsed the archives but have not found the answer to this question... I have stunnel set up to handle https connections. It sits on a Debian server alongside HAProxy and works fine with every browser except for Internet Explorer. When I connect with Internet Explorer, I get a blank "Please choose a digital certificate" pop-up. How do we turn off the request for the client certificate in IE? Here are my details....thanks in advance. #vi /etc/stunnel/stunnel.conf verify=0 CAfile=/etc/ssl/certs/chain.pem cert=/etc/ssl/certs/multidomain.pem CApath=/etc/ssl/certs/ pid = /etc/stunnel/stunnel.pid debug = 3 output = /etc/stunnel/stunnel.log socket=l:TCP_NODELAY=1 socket=r:TCP_NODELAY=1 client=no [https] accept=192.168.11.32:443 connect=localhost:444 TIMEOUTclose=0 xforwardedfor=yes #usr/local/bin/stunnel -version stunnel 4.32 on x86_64-unknown-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Global options debug = daemon.notice pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none -- View this message in context: http://old.nabble.com/%22choose-a-digital-certificate%22-pop-up-in-IE-tp286… Sent from the Stunnel - Users mailing list archive at Nabble.com.

4 8

stunnel dies on logoff
by Bhavna Jhunjhunwala 17 Jun '10

17 Jun '10

Hi, I am using quickfix application to connect to an exchange and receive market data. The connectivity to exchange is through SSL and am using stunnel 4.15. I see that stunnel dies, every time my quickfix application is restarted or sends a logout to server. Please let me know if a solution is in place. *Below is the stunnel.conf file:* cert = /home/bhavna/workspace/stunnel/str10100str.pem key = /home/bhavna/workspace/stunnel/str10100str.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = /home/bhavna/workspace/stunnel/stunnel.log pid = /home/bhavna/workspace/stunnel/stunnel.pid ; Use it for client mode client = yes ; Service-level configuration [currenex_stream] ;accept = 127.0.0.1:1109 accept = 1110 ;prod details connect = server_IP:port TIMEOUTclose = 10 *Below are the version details of stunnel:* > ./stunnel -version stunnel 4.15 on x86_64-redhat-linux-gnu with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = /etc/stunnel/stunnel.pem session = 300 seconds TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none *Logs:* 2010.06.16 18:59:23 LOG7[6401:1084586304]: SSL alert (read): warning: close notify 2010.06.16 18:59:23 LOG7[6401:1084586304]: SSL closed on SSL_read 2010.06.16 18:59:23 LOG7[6401:1084586304]: Socket write shutdown 2010.06.16 18:59:23 LOG7[6401:1084586304]: SSL write shutdown 2010.06.16 18:59:23 LOG7[6401:1084586304]: SSL alert (write): warning: close notify 2010.06.16 18:59:23 LOG6[6401:1084586304]: SSL_shutdown successfully sent close_notify 2010.06.16 18:59:23 LOG5[6401:1084586304]: Connection closed: 109 bytes sent to SSL, 129 bytes sent to socket 2010.06.16 18:59:23 LOG7[6401:1084586304]: currenex_stream finished (0 left) -- Thanks, Bhavna DISCLAIMER: This e-mail and any attachments are for the confidential use of the intended recipient. If you are not the intended recipient of this message you are hereby notified that any review, dissemination, distribution or copying of this message is strictly prohibited. This communication is for information purposes only and should not be regarded as an offer to sell or as a solicitation of an offer to buy any investment product, an official confirmation of any transaction or an official statement of Quantitative Brokers, LLC. E-mail transmissions cannot be guaranteed to be secure or error-free. Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such. All information is subject to change without notice. Quantitative Brokers may, at its discretion, monitor and review the content of all e-mail communications.

1 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users