stunnel-users

1 participants
3311 discussions

Compiling for Android
by Pio Tofanelli 21 May '15

21 May '15

Hi, I'm new to stunnel and I'd like to compile it to ARM and x86 platforms. I downloaded the stunnel-5.17 package and I'm using the build-android.sh and android-ndk-r10e script to compile it: ../../configure --with-sysroot=/home/ptofanelli/android-ndk-r10e/platforms/android-18/arch-arm/ --build=i686-pc-linux-gnu --host=arm-linux-androideabi --prefix=/data/local I'm getting the message "The C compiler cannot create executables" and checking the logs I've found that the problem is this: configure:3538: arm-linux-androideabi-gcc conftest.c >&5 /home/ptofanelli/android-ndk-r10e/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot open crtbegin_dynamic.o: No such file or directory /home/ptofanelli/android-ndk-r10e/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot open crtend_android.o: No such file or directory /home/ptofanelli/android-ndk-r10e/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot find -lc /home/ptofanelli/android-ndk-r10e/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot find -ldl collect2: error: ld returned 1 exit status I searched for this problem and a topic in stackoverflow ( http://stackoverflow.com/questions/16795583/android-error-cannot-open-crtbe…) is said that the problem is the sysroot, so I tried to use the option --with-sysroot, but I'm getting the same problem. Can you help me? Thanks and regards, Pio Tofanelli

1 0

Stunnel not working with Office 365
by Hannu Viitala 19 May '15

19 May '15

Hi, We cannot get stunnel SMTP to work with Office 365 mail server. We are using Stunnel 5.13 and below are the config file content and the the client PC logs. The mail server logs do not reveal anything more. Two observations of the test setup: 1) Using e.g. Mozilla Firebird mail client directly SLL/SMTP on the same PC connection to same Office 365 mail server works ok, but via Stunnel it outputs the error log below. 2) Also, on the same PC, SSL/SMTP connection via stunnel to Gmail server works ok. Stunnel conf-file: ============== output = stunnel_log.txt debug = debug cert = tstunnel.pem client = yes [SSMTP] accept = 127.0.0.1:54500 connect = xxx.xxx.xxx.xxx:587 (Hannu V: removed IP address from this mail) protocol = smtp Client PC logs: =========== 2015.04.28 09:17:36 LOG7[ui]: No limit detected for the number of clients 2015.04.28 09:17:36 LOG5[ui]: stunnel 5.13 on x86-pc-msvc-1500 platform 2015.04.28 09:17:36 LOG5[ui]: Compiled/running with OpenSSL 1.0.2a 19 Mar 2015 2015.04.28 09:17:36 LOG5[ui]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2015.04.28 09:17:36 LOG7[ui]: errno: (*_errno()) 2015.04.28 09:17:36 LOG5[ui]: Reading configuration from file tstunnelSmtp_SAUX1_0.conf 2015.04.28 09:17:36 LOG5[ui]: UTF-8 byte order mark not detected 2015.04.28 09:17:36 LOG5[ui]: FIPS mode disabled 2015.04.28 09:17:36 LOG7[ui]: Compression disabled 2015.04.28 09:17:36 LOG7[ui]: PRNG seeded successfully 2015.04.28 09:17:36 LOG6[ui]: Initializing service [SSmtp] 2015.04.28 09:17:36 LOG6[ui]: Loading certificate from file: tstunnel.pem 2015.04.28 09:17:36 LOG6[ui]: Loading key from file: tstunnel.pem 2015.04.28 09:17:36 LOG7[ui]: Private key check succeeded 2015.04.28 09:17:36 LOG7[ui]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2015.04.28 09:17:36 LOG5[ui]: Configuration successful 2015.04.28 09:17:36 LOG7[ui]: Listening file descriptor created (FD=448) 2015.04.28 09:17:36 LOG7[ui]: Service [SSmtp] (FD=448) bound to 127.0.0.1:8030 2015.04.28 09:17:36 LOG7[ui]: Service [SSmtp] accepted (FD=456) from 127.0.0.1:54500 2015.04.28 09:17:36 LOG7[ui]: Creating a new thread 2015.04.28 09:17:36 LOG7[ui]: New thread created 2015.04.28 09:17:36 LOG7[0]: Service [SSmtp] started 2015.04.28 09:17:36 LOG5[0]: Service [SSmtp] accepted connection from 127.0.0.1:54500 2015.04.28 09:17:36 LOG6[0]: s_connect: connecting xxx.xxx.xxx.xxx:587 (Hannu V: removed IP address from this mail) 2015.04.28 09:17:36 LOG7[0]: s_connect: s_poll_wait connecting xxx.xxx.xxx.xxx:587 : waiting 10 seconds (Hannu V: removed IP address from this mail) 2015.04.28 09:17:37 LOG5[0]: s_connect: connected connecting xxx.xxx.xxx.xxx:587 (Hannu V: removed IP address from this mail) 2015.04.28 09:17:37 LOG5[0]: Service [SSmtp] connected remote server from yyy.yyy.yyy.yyy:54503 (Hannu V: removed IP address from this mail) 2015.04.28 09:17:37 LOG7[0]: Remote socket (FD=472) initialized 2015.04.28 09:17:37 LOG7[0]: <- 220 NNN.outlook.office365.com Microsoft ESMTP MAIL Service ready at Tue, 28 Apr 2015 14:17:38 +0000 2015.04.28 09:17:37 LOG7[0]: -> 220 NNN.outlook.office365.com Microsoft ESMTP MAIL Service ready at Tue, 28 Apr 2015 14:17:38 +0000 2015.04.28 09:17:37 LOG7[0]: -> EHLO localhost 2015.04.28 09:17:37 LOG7[0]: <- 250-NNN.outlook.office365.com Hello [xxx.xxx.xxx.161] (Hannu V: removed IP address from this mail) 2015.04.28 09:17:37 LOG7[0]: <- 250-SIZE 157286400 2015.04.28 09:17:37 LOG7[0]: <- 250-PIPELINING 2015.04.28 09:17:37 LOG7[0]: <- 250-DSN 2015.04.28 09:17:37 LOG7[0]: <- 250-ENHANCEDSTATUSCODES 2015.04.28 09:17:37 LOG7[0]: <- 250-STARTTLS 2015.04.28 09:17:37 LOG7[0]: <- 250-8BITMIME 2015.04.28 09:17:37 LOG7[0]: <- 250-BINARYMIME 2015.04.28 09:17:37 LOG7[0]: <- 250 CHUNKING 2015.04.28 09:17:37 LOG7[0]: -> STARTTLS 2015.04.28 09:17:37 LOG7[0]: <- 220 2.0.0 SMTP server ready 2015.04.28 09:17:37 LOG6[0]: SNI: sending servername: NNN.office365.com 2015.04.28 09:17:37 LOG7[0]: SSL state (connect): before/connect initialization 2015.04.28 09:17:37 LOG7[0]: SSL state (connect): SSLv2/v3 write client hello A 2015.04.28 09:17:37 LOG7[0]: SSL state (connect): SSLv3 read server hello A 2015.04.28 09:17:37 LOG7[0]: SSL state (connect): SSLv3 read server certificate A 2015.04.28 09:17:37 LOG7[0]: SSL state (connect): SSLv3 read server key exchange A 2015.04.28 09:17:37 LOG7[0]: SSL state (connect): SSLv3 read server certificate request A 2015.04.28 09:17:37 LOG7[0]: SSL state (connect): SSLv3 read server done A 2015.04.28 09:17:37 LOG7[0]: SSL state (connect): SSLv3 write client certificate A 2015.04.28 09:17:37 LOG7[0]: SSL state (connect): SSLv3 write client key exchange A 2015.04.28 09:17:37 LOG7[0]: SSL state (connect): SSLv3 write certificate verify A 2015.04.28 09:17:37 LOG7[0]: SSL state (connect): SSLv3 write change cipher spec A 2015.04.28 09:17:37 LOG7[0]: SSL state (connect): SSLv3 write finished A 2015.04.28 09:17:37 LOG7[0]: SSL state (connect): SSLv3 flush data 2015.04.28 09:17:37 LOG3[0]: SSL_connect: Peer suddenly disconnected 2015.04.28 09:17:37 LOG5[0]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.04.28 09:17:37 LOG7[0]: Remote socket (FD=472) closed 2015.04.28 09:17:37 LOG7[0]: Local socket (FD=456) closed 2015.04.28 09:17:37 LOG7[0]: Service [SSmtp] finished (0 left) --- Hannu

2 1

Authentication methods
by Michal Trojnara 15 May '15

15 May '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dear Users, While reading various 3rd party stunnel tutorials I noticed that they either don't configure authentication, or they recommend insecure configurations. I wrote a short overview of authentication methods available in stunnel: https://www.stunnel.org/auth.html Proper authentication is essential to TLS security. Mike -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJVVXk5AAoJEC78f/DUFuAUN/QP/3m4HX4zWS8SehukDNWw54AB ySAT+XmT8SEo/iuGer/CRYbUWoMDpmwaI9x+whXMg+EBsxGd+nmyE9fkFiFSqOsV vnXc14zuMkQYorWbGtduXdnQ0/jQzWPDOIeKgpyXIsN/OvEhx1A6med9Go/SqaFz couW55wysqpJ9a+3YMtxIjLoCMzIGOZ8TKIHWJiZaBcgp93YCABeoE5hKR4RlxVj OrgHhuyA8yz1EIYUPKTEMuJwqnCl9Mk3FVskKIXgfEcxBzism2n/xJpEIYAWVPRW N8JaaZDojk6dt5oMiMzXUeobigZ82SKuV9MG3aQjuxXAP7IX2vuOa6rQ/85T1OFI PMZMKENM1aAcOVpiq/4OMNKhIG+OuhDm/dla5NC8lsfxDuJ3YESVp/Z0VeW1EWYA BFHxjGw8OA65izTYcvJKl1j7flfSgRELOCf1SMakR+VIUhkWlPQjdHWuW2V5NKgv 5aU0fwPGEpudKdsLFzgaYzhVPjTNfavl8k+xUWHOQyrNvEM9SNbOTyorxY7QA2aQ uyAOrUF8whboBTX59/3gXYI9vaepvT00ktCtQEz3XelkYT9SzCRYV+I+mUqquBd+ 0JQdiSMvOzfNraxT03rzYA6h/Iey9+tj9WnffpmYU5eyTt2bCp+xavzCyEmdQZlq 4LfAPgFYII9+59444dY2 =m51O -----END PGP SIGNATURE-----

1 0

Stunnel4 not working?
by David H. Durgee 13 May '15

13 May '15

Given a lack of other suggestions here and elsewhere that yielded any progress, I decided to download the current source and attempt to build it on my system. I didn't see a routine to check for prerequisites being met, so I wound up running ./configure several times and adding the libssl-dev, libwrap0-dev and libsystemd-daemon-dev packages based on what I saw in the output. Perhaps a check routine could be added later? I then ran make and the output contains neither errors nor warnings, so that looks good. As suggested in the INSTALL file, I next ran make check and received neither errors nor warnings. At this point the next step appears to be make install as root, but I am wondering if I should uninstall the stunnel4 package from the repository first. I am also wondering if I can simply use the existing /etc/stunnel/stunnel.conf that I included in my first post in this thread or if I should start over with one of the examples included with this version. I would appreciate input from the list on this. If you want to see further details, such as ./configure or make outputs or configuration files just let me know and I will put them in a follow-up post. Dave

2 1

Re: [stunnel-users] Stunnel 5.17 on AIX
by Eckert, Doug 13 May '15

13 May '15

Thanks! I applied the patch to tls.c and I'm able to create sessions with no problem. The version of OpenSSL provided by IBM is built off the 1.0.1e codebase, with backported security fixes via "iFixes" for announced CVEs. They apparently don't backport new functionality or maybe even non-CVE bugfixes. I'm guessing an un-patched stunnel 5.17 would work once/if they release OpenSSL built off 1.0.1j or later. > On Tue, May 12, 2015 at 3:40 PM, Michal Trojnara <Michal.Trojnara(a)mirt.net > > wrote: > >> On 12.05.2015 18:29, Eckert, Doug wrote: >> > With that in mind, I compiled stunnel v5.03 with same OpenSSL 1.0.1.513 >> > and iFix IV71446m9a applied as with the v5.17 attempt. I'm able to >> > create sessions with no problem. The internal error/bad magic does not >> > occur. >> >> Additional security checks to the OpenSSL memory management functions >> were introduced in stunnel 5.09. The enclosed patch disables them in >> the latest stunnel 5.17. >> >> Mike >> >> _______________________________________________ >> stunnel-users mailing list >> stunnel-users(a)stunnel.org >> https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users >> >> > > > -- > > > >

1 0

Stunnel 5.17 on AIX
by Eckert, Doug 12 May '15

12 May '15

I've gotten v5.17 compiled on AIX 5.3 & 6.1 with the following xlccmp.13.1.0 13.1.0.3 COMMITTED XL C compiler openssl.base 1.0.1.513 COMMITTED Open Secure Socket Layer IV71446m9a Ifix for Openssl CVE Everything seems to have compiled fine. I packaged it up, installed, and set up a quick config. The server side aborts on me. Debug output follows. Need some direction on where to look next. Thanks in advance! 2015.05.06 12:08:03 LOG7[ui]: Clients allowed=31999 2015.05.06 12:08:03 LOG5[ui]: stunnel 5.17 on powerpc-ibm-aix5.3.0.0 platform 2015.05.06 12:08:03 LOG5[ui]: Compiled/running with OpenSSL 1.0.1e 11 Feb 2013 2015.05.06 12:08:03 LOG5[ui]: Threading:PTHREAD Sockets:SELECT,IPv6 TLS:ENGINE,OCSP,PSK,SNI 2015.05.06 12:08:03 LOG7[ui]: errno: (*_Errno()) 2015.05.06 12:08:03 LOG5[ui]: Reading configuration from file /opt/freeware/etc/stunnel/stunnel.conf 2015.05.06 12:08:03 LOG5[ui]: UTF-8 byte order mark not detected 2015.05.06 12:08:03 LOG7[ui]: Compression disabled 2015.05.06 12:08:03 LOG7[ui]: Snagged 64 random bytes from //.rnd 2015.05.06 12:08:03 LOG7[ui]: Wrote 1024 new random bytes to //.rnd 2015.05.06 12:08:03 LOG7[ui]: PRNG seeded successfully 2015.05.06 12:08:03 LOG6[ui]: Initializing service [client] 2015.05.06 12:08:03 LOG6[ui]: Loading certificate from file: /usr/share/ssl/certs/skdkgesaix53-client-cert.pem 2015.05.06 12:08:03 LOG6[ui]: Loading key from file: /usr/share/ssl/certs/skdkgesaix53-client-key.pem 2015.05.06 12:08:03 LOG7[ui]: Private key check succeeded 2015.05.06 12:08:03 LOG7[ui]: Verify directory set to /usr/share/ssl/certs 2015.05.06 12:08:03 LOG7[ui]: Added /usr/share/ssl/certs revocation lookup directory 2015.05.06 12:08:03 LOG6[ui]: Peer certificate location /usr/share/ssl/certs 2015.05.06 12:08:03 LOG7[ui]: SSL options: 0x01000004 (+0x03000000, -0x02000000) 2015.05.06 12:08:03 LOG6[ui]: Initializing service [server] 2015.05.06 12:08:03 LOG6[ui]: Loading certificate from file: /usr/share/ssl/certs/skdkgesaix53-server-cert.pem 2015.05.06 12:08:03 LOG6[ui]: Loading key from file: /usr/share/ssl/certs/skdkgesaix53-server-key.pem 2015.05.06 12:08:03 LOG7[ui]: Private key check succeeded 2015.05.06 12:08:03 LOG7[ui]: Verify directory set to /usr/share/ssl/certs 2015.05.06 12:08:03 LOG7[ui]: Added /usr/share/ssl/certs revocation lookup directory 2015.05.06 12:08:03 LOG6[ui]: Peer certificate location /usr/share/ssl/certs 2015.05.06 12:08:03 LOG7[ui]: DH initialization 2015.05.06 12:08:03 LOG7[ui]: Could not load DH parameters from /usr/share/ssl/certs/skdkgesaix53-server-cert.pem 2015.05.06 12:08:03 LOG7[ui]: Using hardcoded DH parameters 2015.05.06 12:08:03 LOG7[ui]: DH initialized with 2048-bit key 2015.05.06 12:08:03 LOG7[ui]: ECDH initialization 2015.05.06 12:08:03 LOG7[ui]: ECDH initialized with curve prime256v1 2015.05.06 12:08:03 LOG7[ui]: SSL options: 0x01004004 (+0x03004000, -0x02000000) 2015.05.06 12:08:03 LOG5[ui]: Configuration successful 2015.05.06 12:08:03 LOG7[ui]: Listening file descriptor created (FD=7) 2015.05.06 12:08:03 LOG7[ui]: Service [client] (FD=7) bound to 127.0.0.1:22 2015.05.06 12:08:03 LOG7[ui]: Listening file descriptor created (FD=8) 2015.05.06 12:08:03 LOG7[ui]: Service [server] (FD=8) bound to 172.26.85.13:2222 2015.05.06 12:08:04 LOG7[main]: Created pid file /var/pid/stunnel.pid 2015.05.06 12:08:29 LOG7[main]: Service [server] accepted (FD=3) from 172.26.85.14:52649 2015.05.06 12:08:29 LOG7[0]: Service [server] started 2015.05.06 12:08:29 LOG5[0]: Service [server] accepted connection from 172.26.85.14:52649 2015.05.06 12:08:29 LOG7[0]: SSL state (accept): before/accept initialization 2015.05.06 12:08:29 LOG7[0]: SNI: no virtual services defined 2015.05.06 12:08:29 LOG7[0]: SSL state (accept): SSLv3 read client hello A 2015.05.06 12:08:29 LOG7[0]: SSL state (accept): SSLv3 write server hello A 2015.05.06 12:08:29 LOG7[0]: SSL state (accept): SSLv3 write certificate A INTERNAL ERROR: Bad magic at tls.c, line 182 --Doug

2 4

Stunnel4 not working?
by David H. Durgee 09 May '15

09 May '15

> Please see highlighted below: > > On Fri, May 8, 2015 at 5:27 PM, David H. Durgee <dhdurgee at verizon.net <https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users>> > wrote: > > >/ At some point in the near past stunnel stopped working on my laptop. The > />/ laptop is running Linux Mint 17.1 Rebecca x64 and stunnel from the > />/ repositories. I enabled debug=7, but I am not getting much from the log: > />/ > />/ > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Clients allowed=500 > />/ > />/ > />/ > />/ *2015.05.08 17 <2015.05.08%2017>:12:06 LOG5[10804:140318864611136]: > />/ stunnel 4.53 on x86_64-pc-linux-gnu platform 2015.05.08 17 > />/ <2015.05.08%2017>:12:06 LOG5[10804:140318864611136]: Compiled with OpenSSL > />/ 1.0.1e 11 Feb 2013 2015.05.08 17 <2015.05.08%2017>:12:06 > />/ LOG5[10804:140318864611136]: Running with OpenSSL 1.0.1f 6 Jan 2014 > />/ 2015.05.08 17 <2015.05.08%2017>:12:06 LOG5[10804:140318864611136]: Update > />/ OpenSSL shared libraries or rebuild stunnel* > / > > Is there a reason that you're using libraries from a different compiled > Stunnel? In fact, isn't there another Stunnel package you can use that is > more up-to-date? If not, perhaps compile your own using the OpenSSL > libraries that comes with Mint. I am using the package from the Mint repository, which in this case is the Ubuntu Trusty repository. If you know of a repository I can add with a more current package I will do so. If necessary I guess I could build from source, but I don't do that often and would prefer to locate a binary. > >/ > />/ 2015.05.08 17:12:06 LOG5[10804:140318864611136]: Threading:PTHREAD > />/ SSL:+ENGINE+OCSP Auth:LIBWRAP Sockets:POLL+IPv6 > />/ 2015.05.08 17:12:06 LOG5[10804:140318864611136]: Reading configuration > />/ from file /etc/stunnel/stunnel.conf > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Compression not enabled > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: PRNG seeded successfully > />/ 2015.05.08 17:12:06 LOG6[10804:140318864611136]: Initializing service > />/ section [telnets] > />/ *2015.05.08 17 <2015.05.08%2017>:12:06 LOG4[10804:140318864611136]: > />/ Insecure file permissions on /etc/ssl/certs/stunnel.pem* > / > > Warning: the permissions may be too wide-open (should be 700 I assume) > > > >/ > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Certificate: > />/ /etc/ssl/certs/stunnel.pem > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Certificate loaded > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Key file: > />/ /etc/ssl/certs/stunnel.pem > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Private key loaded > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: SSL options set: > />/ 0x00000004 > />/ 2015.05.08 17:12:06 LOG6[10804:140318864611136]: Initializing service > />/ section [dsp3270s] > />/ *2015.05.08 17 <2015.05.08%2017>:12:06 LOG4[10804:140318864611136]: > />/ Insecure file permissions on /etc/ssl/certs/stunnel.pem* > / > > Same as above, perhaps too wide open, permissions should be 700 I assume. > > > >/ > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Certificate: > />/ /etc/ssl/certs/stunnel.pem > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Certificate loaded > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Key file: > />/ /etc/ssl/certs/stunnel.pem > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Private key loaded > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: SSL options set: > />/ 0x00000004 > />/ 2015.05.08 17:12:06 LOG5[10804:140318864611136]: Configuration successful > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Service [telnets] > />/ (FD=12) bound to 0.0.0.0:3141 > />/ 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Service [dsp3270s] > />/ (FD=13) bound to 0.0.0.0:7490 > />/ 2015.05.08 17:12:06 LOG7[10810:140318864611136]: Created pid file > />/ /stunnel4.pid > />/ 2015.05.08 17:12:31 LOG7[10810:140318864611136]: Service [telnets] > />/ accepted (FD=3) from 127.0.0.1:40090 > />/ 2015.05.08 17:12:31 LOG7[10810:140318864770816]: Service [telnets] started > />/ 2015.05.08 17:12:31 LOG7[10810:140318864770816]: Waiting for a libwrap > />/ process > />/ 2015.05.08 17:12:31 LOG7[10810:140318864770816]: Acquired libwrap process > />/ #0 > />/ > />/ > />/ *2015.05.08 17 <2015.05.08%2017>:12:31 LOG3[10810:140318864770816]: > />/ Unexpected socket close (read_blocking) 2015.05.08 17 > />/ <2015.05.08%2017>:12:31 LOG5[10810:140318864770816]: Connection reset: 0 > />/ byte(s) sent to SSL, 0 byte(s) sent to socket 2015.05.08 17 > />/ <2015.05.08%2017>:12:31 LOG7[10810:140318864770816]: Local socket (FD=3) > />/ closed* > / > > that sounds like SELinux permissions perhaps? Have you tried temporarily > disabling SELinux, or perhaps you have a firewall (iptables) set up? You'll > have to allow the incoming port and possibly an entry in /etc/services > IIRC. I don't know if this helps but this is what I found: > https://sites.google.com/site/easylinuxtipsproject/security > A link to "ufw" may prove useful, if your system has that installed. Most > systems have locked-down privileged ports (any port less than 1024, like in > your example). I do have ufw here, but I have the same problem with it enabled or disabled. The telnets service is listening on port 3141 and the dsp3270s on port 7490, so neither of them are privileged ports. > >/ > />/ 2015.05.08 17:12:31 LOG7[10810:140318864770816]: Service [telnets] > />/ finished (0 left) > />/ 2015.05.08 17:12:31 LOG7[10810:140318864770816]: str_stats: 1 block(s), > />/ 32 data byte(s), 58 control byte(s) > />/ 2015.05.08 17:13:32 LOG7[10810:140318864611136]: Service [dsp3270s] > />/ accepted (FD=3) from 127.0.0.1:48534 > />/ 2015.05.08 17:13:32 LOG7[10810:140318864770816]: Service [dsp3270s] > />/ started > />/ 2015.05.08 17:13:32 LOG7[10810:140318864770816]: Waiting for a libwrap > />/ process > />/ 2015.05.08 17:13:32 LOG7[10810:140318864770816]: Acquired libwrap process > />/ #1 > />/ *2015.05.08 17 <2015.05.08%2017>:13:32 LOG3[10810:140318864770816]: > />/ Unexpected socket close (read_blocking)* > />/ > / > That sounds like some kind of firewall issue (like above). As noted above, same behavior with ufw enabled or disabled. > >/ 2015.05.08 17:13:32 LOG5[10810:140318864770816]: Connection reset: 0 > />/ byte(s) sent to SSL, 0 byte(s) sent to socket > />/ 2015.05.08 17:13:32 LOG7[10810:140318864770816]: Local socket (FD=3) > />/ closed > />/ 2015.05.08 17:13:32 LOG7[10810:140318864770816]: Service [dsp3270s] > />/ finished (0 left) > />/ 2015.05.08 17:13:32 LOG7[10810:140318864770816]: str_stats: 1 block(s), > />/ 32 data byte(s), 58 control byte(s) > />/ > />/ > / When in a situation like this, I would first try unprivileged ports with > localhost using iperf, just to generate some dummy traffic. A good > technique I use when debugging stunnel versus debugging networking or other > security issues is to do local traffic only like this: > > 1. iperf client connect to localhost port 5000 > 2. Stunnel client listen on port 5000, connect to localhost port 6000 > 3. Stunnel server listen on port 6000, connect to localhost port 7000 > 4. iperf server listening on localhost port 7000 > > As you can see from that, running iperf client for a few seconds, it should > be able to connect to the iperf server. If not, stunnel is not working. > Debug this FIRST before proceeding to working with non-localhost IP > addresses. The actual procedure would be as follows: > > 1. Download/install iperf > 2. Verify iperf works by having one shell run as server, listening on > localhost port 7000, and another shell setup iperf client sending on port > 7000. If that works, then proceed. Don't use iperf to connect to port 7000 > again. > 3. Set up two config files, one for stunnel client and one for stunnel > server, with different ports and the "client=yes" in the client config > file. For easier detection with "ps" or "top", you can copy the executable > file to another name (i.e., "s4client" for the stunnel 4 client, and > "s4server" for the stunnel 4 server). Similarly for iperf, you can copy the > exe to "iperfc" and "iperfs" for iperf server, for easier process detection. > 4. Start up the stunnel server first, then stunnel client, with the > appropriate config files per the port enumeration mentioned above. > 5. Start iperf server listening on port 7000. > 6. Start iperf client sending on port 5000. If you get some really large > value or nothing, then your stunnel config (client/server) needs to be > debugged first before proceeding to non-localhost IPs. I usually get > something like 3GB/sec when using a Windows 7 VM inside Windows 7 doing > this from DOS prompts with appropriate server/client configs set up. I > usually use four windows: two for iperf (c/s), two for stunnel (c/s). > > Hope that helps... > -Rob I have an stunnel server on another system on the LAN and that is the one I am having the client with the problem connect to while trying to find the problem. I know that server is working, as I have seen other incoming traffic handled by it. I suspect the problem is related to the message you pointed out that I missed about SSL libraries. I would very much appreciate a pointer to a more current package in a repository. Thanks for your response, Rob. Dave

1 0

Stunnel 5.17 build on AIX - libssp missing
by Rob Lockhart 09 May '15

09 May '15

I have AIX 6.1 (64-bit) with GCC 4.2.0. It has an older version of OpenSSL (0.9.8) installed from IBM but I'm trying to compile Stunnel 5.17 with OpenSSL 1.0.2a-fips as non-root. I proceed as follows: cd ~; [ -d openssl ] && rm -rf openssl; mkdir openssl cd ~/OpenSSL; [ -d openssl-fips-2.0.9 ] && rm -rf openssl-fips-2.0.9 gzip -dc openssl-fips-2.0.9.tar.gz | tar xvf - cd openssl-fips-2.0.9; chmod 755 Configure ./Configure aix64-gcc --openssldir=$HOME/openssl make make install NOTE: the above is just the FIPS canister (library), not the executable. cd ~/OpenSSL; [ -d openssl-1.0.2a ] && rm -rf openssl-1.0.2a gzip -dc openssl-1.0.2a.tar.gz | tar xvf - cd openssl-1.0.2a; chmod 755 Configure ./Configure aix64-gcc fips shared --openssldir=$HOME/openssl --with-fipsdir=$HOME/openssl make depend make make test make install cd ~/openssl/bin; ./openssl version; ./openssl speed NOTE: Look for "ALL OCSP TESTS SUCCESSFUL" after "make test" to verify the test build was successful, and it was. NOTE: "./openssl version" should show "OpenSSL 1.0.2a-fips 19 Mar 2015" NOTE: "./openssl speed" should take a while as it's measuring the speed for all algorithms Final test of OpenSSL 1.0.2a-fips: ./openssl sha1 -hmac etaonrishdlcupfm ~/OpenSSL/openssl-fips-2.0.9.tar.gz - should return: 54552e9a3ed8d1561341e8945fcdec55af961322 Now, I try to compile Stunnel: rm -rf $HOME/stunnel-bin; mkdir $HOME/stunnel-bin cd ~/Stunnel; [ -f stunnel-5.17 ] && rm -rf stunnel-5.17 gzip -dc stunnel-5.17.tar.gz | tar xvf - ; cd stunnel-5.17 ./configure --enable-fips --prefix=$HOME/stunnel-bin --with-ssl=$HOME/openssl make I get a failure at make for a library not found: /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -D_THREAD_SAFE -Wall -Wextra -Wformat=2 -Wconversion -Wno-long-long -Wno-deprecated-declarations -fstack-protector -fPIE -D_FORTIFY_SOURCE=2 -L/home/lockharr/openssl/lib64 -L/home/lockharr/openssl/lib -lssl -lcrypto -o stunnel stunnel-tls.o stunnel-str.o stunnel-file.o stunnel-client.o stunnel-log.o stunnel-options.o stunnel-protocol.o stunnel-network.o stunnel-resolver.o stunnel-ssl.o stunnel-ctx.o stunnel-verify.o stunnel-sthreads.o stunnel-fd.o stunnel-stunnel.o stunnel-pty.o stunnel-libwrap.o stunnel-ui_unix.o -lpthreads libtool: link: gcc -g -O2 -D_THREAD_SAFE -Wall -Wextra -Wformat=2 -Wconversion -Wno-long-long -Wno-deprecated-declarations -fstack-protector -fPIE -D_FORTIFY_SOURCE=2 -o stunnel stunnel-tls.o stunnel-str.o stunnel-file.o stunnel-client.o stunnel-log.o stunnel-options.o stunnel-protocol.o stunnel-network.o stunnel-resolver.o stunnel-ssl.o stunnel-ctx.o stunnel-verify.o stunnel-sthreads.o stunnel-fd.o stunnel-stunnel.o stunnel-pty.o stunnel-libwrap.o stunnel-ui_unix.o -L/home/lockharr/openssl/lib64 -L/home/lockharr/openssl/lib -lssl -lcrypto -lpthreads collect2: library libssp_nonshared not found The interesting part is that doing a "grep -R libssp" of the source tree only shows one reference to libssp: $ grep -R libssp * stunnel-5.17/tools/stunnel.nsi: # MINGW builds requires libssp-0.dll instead of msvcr90.dll Googling showed some really old links that had libssp skipped for GCC on AIX: http://gcc.gnu.org/ml/gcc-patches/2005-09/msg01231.html and another that added it back in: http://marc.info/?l=gcc-patches&m=130168534803966 Can anyone who has compiled this for AIX give me a clue about what's going on? This looks like a reference to a non-existent library but I would think that if GCC needed that, it wouldn't allow the RPM for GCC to be installed. Thanks, -Rob

2 1

Stunnel4 not working?
by David H. Durgee 08 May '15

08 May '15

At some point in the near past stunnel stopped working on my laptop. The laptop is running Linux Mint 17.1 Rebecca x64 and stunnel from the repositories. I enabled debug=7, but I am not getting much from the log: 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Clients allowed=500 2015.05.08 17:12:06 LOG5[10804:140318864611136]: stunnel 4.53 on x86_64-pc-linux-gnu platform 2015.05.08 17:12:06 LOG5[10804:140318864611136]: Compiled with OpenSSL 1.0.1e 11 Feb 2013 2015.05.08 17:12:06 LOG5[10804:140318864611136]: Running with OpenSSL 1.0.1f 6 Jan 2014 2015.05.08 17:12:06 LOG5[10804:140318864611136]: Update OpenSSL shared libraries or rebuild stunnel 2015.05.08 17:12:06 LOG5[10804:140318864611136]: Threading:PTHREAD SSL:+ENGINE+OCSP Auth:LIBWRAP Sockets:POLL+IPv6 2015.05.08 17:12:06 LOG5[10804:140318864611136]: Reading configuration from file /etc/stunnel/stunnel.conf 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Compression not enabled 2015.05.08 17:12:06 LOG7[10804:140318864611136]: PRNG seeded successfully 2015.05.08 17:12:06 LOG6[10804:140318864611136]: Initializing service section [telnets] 2015.05.08 17:12:06 LOG4[10804:140318864611136]: Insecure file permissions on /etc/ssl/certs/stunnel.pem 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Certificate: /etc/ssl/certs/stunnel.pem 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Certificate loaded 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Key file: /etc/ssl/certs/stunnel.pem 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Private key loaded 2015.05.08 17:12:06 LOG7[10804:140318864611136]: SSL options set: 0x00000004 2015.05.08 17:12:06 LOG6[10804:140318864611136]: Initializing service section [dsp3270s] 2015.05.08 17:12:06 LOG4[10804:140318864611136]: Insecure file permissions on /etc/ssl/certs/stunnel.pem 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Certificate: /etc/ssl/certs/stunnel.pem 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Certificate loaded 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Key file: /etc/ssl/certs/stunnel.pem 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Private key loaded 2015.05.08 17:12:06 LOG7[10804:140318864611136]: SSL options set: 0x00000004 2015.05.08 17:12:06 LOG5[10804:140318864611136]: Configuration successful 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Service [telnets] (FD=12) bound to 0.0.0.0:3141 2015.05.08 17:12:06 LOG7[10804:140318864611136]: Service [dsp3270s] (FD=13) bound to 0.0.0.0:7490 2015.05.08 17:12:06 LOG7[10810:140318864611136]: Created pid file /stunnel4.pid 2015.05.08 17:12:31 LOG7[10810:140318864611136]: Service [telnets] accepted (FD=3) from 127.0.0.1:40090 2015.05.08 17:12:31 LOG7[10810:140318864770816]: Service [telnets] started 2015.05.08 17:12:31 LOG7[10810:140318864770816]: Waiting for a libwrap process 2015.05.08 17:12:31 LOG7[10810:140318864770816]: Acquired libwrap process #0 2015.05.08 17:12:31 LOG3[10810:140318864770816]: Unexpected socket close (read_blocking) 2015.05.08 17:12:31 LOG5[10810:140318864770816]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.05.08 17:12:31 LOG7[10810:140318864770816]: Local socket (FD=3) closed 2015.05.08 17:12:31 LOG7[10810:140318864770816]: Service [telnets] finished (0 left) 2015.05.08 17:12:31 LOG7[10810:140318864770816]: str_stats: 1 block(s), 32 data byte(s), 58 control byte(s) 2015.05.08 17:13:32 LOG7[10810:140318864611136]: Service [dsp3270s] accepted (FD=3) from 127.0.0.1:48534 2015.05.08 17:13:32 LOG7[10810:140318864770816]: Service [dsp3270s] started 2015.05.08 17:13:32 LOG7[10810:140318864770816]: Waiting for a libwrap process 2015.05.08 17:13:32 LOG7[10810:140318864770816]: Acquired libwrap process #1 2015.05.08 17:13:32 LOG3[10810:140318864770816]: Unexpected socket close (read_blocking) 2015.05.08 17:13:32 LOG5[10810:140318864770816]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.05.08 17:13:32 LOG7[10810:140318864770816]: Local socket (FD=3) closed 2015.05.08 17:13:32 LOG7[10810:140318864770816]: Service [dsp3270s] finished (0 left) 2015.05.08 17:13:32 LOG7[10810:140318864770816]: str_stats: 1 block(s), 32 data byte(s), 58 control byte(s) I don't even see the IP address for the outbound connection, so it seems as if it is hitting a problem even before it gets that far. Configuration is pretty simple: ; Sample stunnel configuration file by Michal Trojnara 2002-2009 ; Some options used here may not be adequate for your particular configuration ; Please make sure you understand them (especially the effect of the chroot jail) ; Certificate/key is needed in server mode and optional in client mode cert = /etc/ssl/certs/stunnel.pem ;key = /etc/ssl/certs/stunnel.pem ; Protocol version (all, SSLv2, SSLv3, TLSv1) sslVersion = TLSv1 ; Some security enhancements for UNIX systems - comment them out on Win32 chroot = /var/lib/stunnel4/ setuid = stunnel4 setgid = stunnel4 ; PID is created inside the chroot jail pid = /stunnel4.pid ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 socket = l:SO_KEEPALIVE=1 socket = r:SO_KEEPALIVE=1 socket = l:TCP_KEEPCNT=5 socket = r:TCP_KEEPCNT=5 socket = l:TCP_KEEPIDLE=10 socket = r:TCP_KEEPIDLE=10 socket = l:TCP_KEEPINTVL=2 socket = r:TCP_KEEPINTVL=2 ;compression = zlib ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ; CApath is located inside chroot jail ;CApath = /certs ; It's often easier to use CAfile ;CAfile = /etc/stunnel/certs.pem ; Don't forget to c_rehash CRLpath ; CRLpath is located inside chroot jail ;CRLpath = /crls ; Alternatively you can use CRLfile ;CRLfile = /etc/stunnel/crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [telnets] accept = 3141 ;connect = 192.168.80.11:992 ;connect = DurgeeEnterprises.publicvm.com:992 connect = 192.168.80.5:992 [dsp3270s] accept = 7490 ;connect = 192.168.80.11:246 ;connect = DurgeeEnterprises.publicvm.com:246 connect = 192.168.80.5:246 ;[pop3s] ;accept = 995 ;connect = 110 ;[imaps] ;accept = 993 ;connect = 143 ;[ssmtp] ;accept = 465 ;connect = 25 ;[https] ;accept = 443 ;connect = 80 ;TIMEOUTclose = 0 ; vim:ft=dosini Any thoughts on how to track this down and get this working? Dave

2 1

problem migrating from 4.54 to 5.x
by Scott Weisman 04 May '15

04 May '15

Hi there. I have a program I have used successfully with Stunnel for many years. A while back, I discovered that my program, which is a pure stdio console program, stopped working with 5.x versions of Stunnel. I have spent many hours but have been unable to solve the problem, so I regretfully continue to use the 4.x branch. I was wondering if anyone had similar experiences? Relevant data is pasted below. I comment in the log output where the problem occurs. Any help at all would be greatly appreciated. stunnel.conf: setuid = stunnel setgid = stunnel pid = /var/run/stunnel/stunnel.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 foreground = no debug = 7 output = /var/log/stunnel.log [CF2] client = no accept = 21 verify = 3 sslVersion = all cert = /etc/stunnel/demo.pem key = /etc/stunnel/demo.pem CApath = /etc/stunnel/certs CRLpath = /etc/stunnel/crls TIMEOUTbusy = 60 TIMEOUTclose = 0 TIMEOUTconnect = 60 TIMEOUTidle = 60 exec = /opt/cmf/bin/cf-server execargs = /opt/cmf/bin/cf-server -p /opt/jail/stunnel/pipes/ Log of successful session with 4.54: 2015.05.01 15:39:39 LOG7[3080:140402563495680]: Starting certificate verification: depth=0, /C=US/L=Bryan/ST=TX/O=Demo Account/emailAddress= demo(a)demo.com/CN=demo 2015.05.01 15:39:39 LOG6[3080:140402563495680]: CERT: Locally installed certificate matched 2015.05.01 15:39:39 LOG5[3080:140402563495680]: Certificate accepted: depth=0, /C=US/L=Bryan/ST=TX/O=Demo Account/emailAddress= demo(a)demo.com/CN=demo 2015.05.01 15:39:39 LOG7[3080:140402563495680]: SSL state (accept): SSLv3 read client certificate A 2015.05.01 15:39:39 LOG7[3080:140402563495680]: SSL state (accept): SSLv3 read client key exchange A 2015.05.01 15:39:39 LOG7[3080:140402563495680]: SSL state (accept): SSLv3 read certificate verify A 2015.05.01 15:39:39 LOG7[3080:140402563495680]: SSL state (accept): SSLv3 read finished A 2015.05.01 15:39:39 LOG7[3080:140402563495680]: SSL state (accept): SSLv3 write session ticket A 2015.05.01 15:39:39 LOG7[3080:140402563495680]: SSL state (accept): SSLv3 write change cipher spec A 2015.05.01 15:39:39 LOG7[3080:140402563495680]: SSL state (accept): SSLv3 write finished A 2015.05.01 15:39:39 LOG7[3080:140402563495680]: SSL state (accept): SSLv3 flush data 2015.05.01 15:39:39 LOG7[3080:140402563495680]: 0 items in the session cache 2015.05.01 15:39:39 LOG7[3080:140402563495680]: 0 client connects (SSL_connect()) 2015.05.01 15:39:39 LOG7[3080:140402563495680]: 0 client connects that finished 2015.05.01 15:39:39 LOG7[3080:140402563495680]: 0 client renegotiations requested 2015.05.01 15:39:39 LOG7[3080:140402563495680]: 1 server connects (SSL_accept()) 2015.05.01 15:39:39 LOG7[3080:140402563495680]: 1 server connects that finished 2015.05.01 15:39:39 LOG7[3080:140402563495680]: 0 server renegotiations requested 2015.05.01 15:39:39 LOG7[3080:140402563495680]: 0 session cache hits 2015.05.01 15:39:39 LOG7[3080:140402563495680]: 0 external session cache hits 2015.05.01 15:39:39 LOG7[3080:140402563495680]: 0 session cache misses 2015.05.01 15:39:39 LOG7[3080:140402563495680]: 0 session cache timeouts 2015.05.01 15:39:39 LOG6[3080:140402563495680]: SSL accepted: new session negotiated 2015.05.01 15:39:39 LOG6[3080:140402563495680]: Negotiated TLSv1/SSLv3 ciphersuite: ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2015.05.01 15:39:39 LOG6[3080:140402563495680]: Compression: null, expansion: null 2015.05.01 15:39:39 LOG6[3080:140402563495680]: Local mode child started (PID=3118) 2015.05.01 15:39:39 LOG7[3080:140402563495680]: Remote socket (FD=11) initialized *** the connection is established and stable; i explicitly disconnect several seconds later 2015.05.01 15:39:45 LOG7[3080:140402563495680]: SSL socket closed on SSL_read 2015.05.01 15:39:45 LOG7[3080:140402563495680]: Sent socket write shutdown 2015.05.01 15:39:45 LOG5[3080:140402563495680]: Connection closed: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.05.01 15:39:45 LOG7[3080:140402563495680]: Remote socket (FD=11) closed 2015.05.01 15:39:45 LOG7[3080:140402563495680]: Local socket (FD=3) closed 2015.05.01 15:39:45 LOG7[3080:140402563495680]: Service [CF2] finished (0 left) Log of unsuccessful session with 5.16: 2015.05.01 15:37:33 LOG7[0]: Verification started at depth=0: C=US, L=Bryan, ST=TX, O=Demo Account, emailAddress=demo(a)demo.com, CN=demo 2015.05.01 15:37:33 LOG7[0]: CERT: Pre-verification succeeded 2015.05.01 15:37:33 LOG6[0]: CERT: Locally installed certificate matched 2015.05.01 15:37:33 LOG5[0]: Certificate accepted at depth=0: C=US, L=Bryan, ST=TX, O=Demo Account, emailAddress=demo(a)demo.com, CN=demo 2015.05.01 15:37:33 LOG7[0]: SSL state (accept): SSLv3 read client certificate A 2015.05.01 15:37:33 LOG7[0]: SSL state (accept): SSLv3 read client key exchange A 2015.05.01 15:37:33 LOG7[0]: SSL state (accept): SSLv3 read certificate verify A 2015.05.01 15:37:33 LOG7[0]: SSL state (accept): SSLv3 read finished A 2015.05.01 15:37:33 LOG7[0]: SSL state (accept): SSLv3 write change cipher spec A 2015.05.01 15:37:33 LOG7[0]: SSL state (accept): SSLv3 write finished A 2015.05.01 15:37:33 LOG7[0]: SSL state (accept): SSLv3 flush data 2015.05.01 15:37:33 LOG7[0]: 1 server accept(s) requested 2015.05.01 15:37:33 LOG7[0]: 1 server accept(s) succeeded 2015.05.01 15:37:33 LOG7[0]: 0 server renegotiation(s) requested 2015.05.01 15:37:33 LOG7[0]: 0 session reuse(s) 2015.05.01 15:37:33 LOG7[0]: 0 internal session cache item(s) 2015.05.01 15:37:33 LOG7[0]: 0 internal session cache fill-up(s) 2015.05.01 15:37:33 LOG7[0]: 0 internal session cache miss(es) 2015.05.01 15:37:33 LOG7[0]: 0 external session cache hit(s) 2015.05.01 15:37:33 LOG7[0]: 0 expired session(s) retrieved 2015.05.01 15:37:33 LOG6[0]: SSL accepted: new session negotiated 2015.05.01 15:37:33 LOG7[0]: Peer certificate was cached (1610 bytes) 2015.05.01 15:37:33 LOG6[0]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2015.05.01 15:37:33 LOG7[0]: Compression: null, expansion: null 2015.05.01 15:37:33 LOG6[0]: Local mode child started (PID=2899) 2015.05.01 15:37:33 LOG7[0]: Remote socket (FD=11) initialized *** immediately after successful connection, something happens; my program has no log output either, which seems to indicate that stunnel is closing it 2015.05.01 15:37:33 LOG6[0]: Read socket closed (readsocket) 2015.05.01 15:37:33 LOG7[main]: Dispatching signals from the signal pipe 2015.05.01 15:37:33 LOG7[0]: Sending close_notify alert 2015.05.01 15:37:33 LOG7[main]: Processing SIGCHLD 2015.05.01 15:37:33 LOG7[0]: SSL alert (write): warning: close notify 2015.05.01 15:37:33 LOG6[main]: Child process 2899 terminated on signal 11 2015.05.01 15:37:33 LOG6[0]: SSL_shutdown successfully sent close_notify alert 2015.05.01 15:37:33 LOG7[main]: Signal pipe is empty 2015.05.01 15:37:33 LOG3[0]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.05.01 15:37:33 LOG5[0]: Connection closed: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.05.01 15:37:33 LOG7[0]: Remote socket (FD=11) closed 2015.05.01 15:37:33 LOG7[0]: Local socket (FD=3) closed 2015.05.01 15:37:33 LOG7[0]: Service [CF2] finished (0 left)

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users