- stunnel-users - stunnel.org

SSLPassPhraseDialog
by Avinash Gaonkar 23 Nov '10

23 Nov '10

Hi Team, How can we configure ssl key passphrase in stunnel config file. for. eg SSLPassPhraseDialog exec:/path/to/passphrase-file parameter we have in apache, so no need to key in password every time when we restart service. Regards, Avinash Gaonkar

3 2

SMPP Protocol and STunnel
by Pathak, Apurva (Apu) 23 Nov '10

23 Nov '10

Hello, I would like to find out if I can use STunnel as follows: I have a stand alone C# executable program that uses a third party SDK that implements SMPP protocol and sends SMS text messages with wireless carriers. Recently, one of the wireless carriers wants us to implement SSL Client Authentication and wants SMPP messages that are exchanged with them to be encrypted after the client authentication is done. I want to find out if I can use STunnel running so that STunnel can encrypt and decrypt the messages exchanged between my program and the carrier's SMS server. (1) Is this possible with STunnel? (2) What are the steps involved? I am on the Windows Server 2003 platform. I would really appreciate a reply. Thanks, Apu

3 12

Re: [stunnel-users] Error: faulting application stunnel.exe, version 0.0.0.0, faulting module libeay32.dll, version 1.0.0.1, fault address 0x0007331e.
by Pathak, Apurva (Apu) 21 Nov '10

21 Nov '10

Ok...I may keep it....at the moment things are very stable so I am not touching any thing for the moment. The client mentioned it...and they examined the stunnel.conf of some of their other customers...so...otherwise it made sense to me to keep it. Thanks again for your help! Apurva ====== Hi Apurva, Good news. Just to mention: SslVersion=all OFTEN SOLVES MANY PROBLEMS in various circumstances. So I would keep it... Just search for it in the mailing list and you will see... This is just an advice... Yours sincerely, Pierre -----Original Message----- From: stunnel-users-bounces(a)mirt.net [mailto:[email protected]] On Behalf Of stunnel-users-request(a)mirt.net Sent: Sunday, November 21, 2010 1:27 PM To: stunnel-users(a)mirt.net Subject: stunnel-users Digest, Vol 76, Issue 13 Send stunnel-users mailing list submissions to stunnel-users(a)mirt.net To subscribe or unsubscribe via the World Wide Web, visit http://stunnel.mirt.net/mailman/listinfo/stunnel-users or, via email, send a message with subject or body 'help' to stunnel-users-request(a)mirt.net You can reach the person managing the list at stunnel-users-owner(a)mirt.net When replying, please edit your Subject line so it is more specific than "Re: Contents of stunnel-users digest..."

1 0

public domain [PATCH] to stunnel 4.34 for Windows CE / Windows Mobile, "no service" CRITICAL bug and unicode bugs fixed
by Pierre DELAAGE 17 Nov '10

17 Nov '10

Dear All, Please find enclosed a patch in "diff -cr orig patched" format, applying to stunnel4.34 as found here ftp://stunnel.mirt.net/stunnel/. This patch mainly addresses compilation and unicode issues for Windows CE targets + ONE critical issue preventing stunnel to service anything (!). I use MS EVC 4sp2 compiler with WCE 420 SDK, on a vista host platform. Once debugged the code works fine on WM6 HTC smartphones. Should work on WM5. It needs a windows CE openssl lib (I recompiled MY patched version of openssl 1.0.0a successfully: I will have to log a patch to those gentlemen, hoping that they are open to integrate it, something not so obvious in the past). I will later post here a link to my patch for openssl 100a pointing to the openssl mailing list. THIS OPENSSL PATCH IS ESSENTIAL : with my older version of openssl 098pre_j for wce, stunnel does not work anymore (it crashes after first cnx). The present stunnel patch addresses the following issues : ************* I] COMPILATION FAILURES 1/ on common.h "EINVAL redefinition" : in fact the compile options WX (see evc.mak) does not tolerate any warning : The MS evc420 compiler ALWAYS issues a warning on this symbol redefinition. Michal and I are dealing with it since month... But, considering that NEITHER Exxx error codes are used in stunnel, I suggest that in fact ALL these redef should be suppressed. TODO: In the future a proper rewrite of code in log.c, where hardcoded values of WSA error codes are used instead of symbolic constant, will have to be done. 2/ client.c CreateProcess is a UNICODE function: code was ascii only. Code has been adapted to work in unicode. 3/ evc.mak path to new openssl lib has been redefined. proper location for the libs in openssl tree has been set in the make-install block (although this block is presently USELESS and needs a complete rewrite). 4/ gui.c All code using hmainmenu is OFF under winCE. So some new lines involving it were not compiling. 5/ options.c linger_val.l_linger and linger_val.l_onoff require ushort values. Strict type checking of the compiler required a proper cast to ushort of the r-values. stralloc uses "strdup": on Win32 and winCE strdup is _strdup (!). 6/ prototypes.h : _beginthread was defined as returning an int, an a long in sthread.c. After some checking in various documentations, long is the correct type, in particular because _beginthread can return the special error value "-1L". So that unsigned types are illogical. This simplifies the code in some locations, by saving some -now useless- casts. 7/ sthread.c create_client: suppressed some useless cast to (long) for beginthread. ************* II] OPERATIONAL ERRORS (at run-time) This is a reminder of previous notification to the mailing list : due to beginthread improper code and/or use, It is presently IMPOSSIBLE for stunnel 434 to be used in production on WCE: it is just unable to service any...service. Nothing happens if, for example, you use it to connect to an https server. No log either ! I corrected the code with both Michal patch to gui.c and mine to sthread.c: gui.c (Michal patch) : _beginthread was called with 0 as stacksize which, cumulated to an improper coding of sthread/beginthread, led to FAILURE of service thread creation. sthread.c: _beginthread : now supports "0" stacksize value, leading to default linker stack size (1MB by default unless specified differently on the linker command line, something we do not yet perform but could). ************* III] MINOR IMPROVMENT _beginthread: added a log on critical event of "failure" to create a service thread. because I think it is a critical event, isn't it? I hope you will find this patch useful. Thank you for your excellent work, Yours sincerely, Pierre Delaage Note : I use stunnel to establish a simple "vpn" between smartphones and a corporate linux server mainly for HTTPS/POPS/SMTPS support. Stunnel is very relevant in that matter, over solutions based on SSH (although we use also ssh), from a communication cost point of view : ssh establishes permanent socket between client and server, so that the communication is charged by the mobile network provider : and these charges are very expensive. On the contrary stunnel only establishes ssl sockets on demand so that financial charges are limited to strict necessary. Please note that stunnel brings "client based certificate authentication" to POP/SMTP mobile mail user agents which only BASICALLY supports SSL with server authentication, but NO client authentication, such as M$ Outlook for Mobile (unless you pay for an exchange server and exchange client licence). Here again stunnel is very relevant. Note 2 : the strdup and unicode bug fixes should benefit also to the win32 (for PC) stunnel version for PC.

1 1

CApath hash calculation broken (ver 4.34)?
by Konstantin Suvorov 17 Nov '10

17 Nov '10

Hello, I’m trying to setup client-server SSL connection with “level 3” verification on server side. I use 4.34 precompiled binary package for win32. I put client certificates into CApath folder with hashed filenames (I use openssl x509 -hash to get them). And nothing works: I get “bad certificate”. After sniffing for filenames stunnel server is looking for I found out that they are not matching the hash values I got with openssl tool. I downloaded openssl binaries (ver. 0.9.8o) and put them into the stunnel folder. This fixed the bug with wrong filename request inside stunnel, but it started to crash after connection is initiated. I tried to install stunnel (fresh download of 4.34) on another computer – the same problem: requested hash-filename is not equal to actual one. Does anybody know how to fix this? Regards, Konstantin.

1 0

STunnel / Memory Usage / 4 Second Lag
by Jesse Proudman 16 Nov '10

16 Nov '10

We have an account running on STunnel that has been operating just fine for the last 9 days. This morning, all of a sudden, stunnel memory usage spiked to consume the entire available memory on the machine, and response time went from sub 1 second to 4+ seconds. Nothing has changed in the load balanced service itself, the configuration, or any of the traffic numbers. Restarting stunnel gets us between 5 and 60 seconds of normal response times before spiking in memory and going back to 4 seconds. Has any one seen this before? Thanks - Jesse

1 0

Difficulty to compile with alternate 64 bit openssl libraries
by Philippe A. 12 Nov '10

12 Nov '10

Hello, I am having a problem when I compile stunnel against 64 bit openssl libraries: ./configure --prefix $HOME/tls --with-threads=fork --with-ssl=/opt2/openssl stunnel will end up using default libraries in /lib (which I can't remove from my environment). The workaround we have found is to modify the configure script and to force the LIBS variable to use "lib64" instead of "lib". # Add SSL includes and libraries CFLAGS="$CFLAGS -I$ssldir/include" LIBS="$LIBS -L$ssldir/lib64 -lssl -lcrypto" #- <---- Is this a known problem? Is there another way around this without changing the configure script? Thanks!

2 1

Reg:libwrap is not working with stunnel 4.34
by mohan raj 10 Nov '10

10 Nov '10

Hi, I successfully cross compiled the Stunnel version 4.34 with OpenSSL version 1.0.0a for arm-linux.i want to use this stunnel with my own application which will communicate with outer world through LAN or GPRS.currently i am testing stunnel with telnet application.Its working fine.I am able to telnet to arm board through SSL enabled telnet terminal software.Now i want restrict the access.so i used the /etc/hosts/allow and /etc/hosts.deny files with my chrroot directory as "/".but stunnel is not at all cared about libwrap service.its not checking those files.if i give libwrap=yes in stunnel.conf file its says "specified option name is not valid here".i compiled stunnel with the option --enable-libwrap and gave the libwrap lib also through LDFLAGS.here with i attached my stunnel version information file, stunnel .conf file also.i think its due to configuration???still i don`t know what to do???so please guys help me out. Thanks & Regards S.Thiyagarajan.

3 4

Error Reading Certificate File
by Ken Davidson 04 Nov '10

04 Nov '10

Hi, I am trying to update my companies Certificate in STunnel and I'm getting the following error messages: Certificate: pass-web_new.pem Error reading certificate file: pass-web_new.pem error queue: 140DC009 : error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib error queue: 906700D : error:0906700D:PEM routines:PEM_ASN1_read_bio:ASN1 lib error queue: D08303A : error:0D08303A:asn1 encoding routines:ASN1_TEMPLATE_NOEXP_D2I:nested asn1 error error queue: D07803A : error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error SSL_CTX_use_certificate_chain_file: D0680A8: error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag We are currently using STunnel without issue; but my certificate is due to expire November 15th. I submitted my request via a CSR file created with OPENSSL. I've attempted to put the data into the file pointed at in the stunnel.conf file but this error continues to haunt me. My previous key was 256, but when making this key I created a 1024 key and used that for the CSR file. I've also added the Intermediate certificate information to the file. Any information on what could be the problem is greatly appreciated. Version: 4.34 Thanks, Ken

1 0

FD_SETSIZE still an option in stunnel 4.34?
by Saikat Chakrabarti 04 Nov '10

04 Nov '10

Hi, I am having some issues with my server where connections are getting dropped once I hit a hard limit of around 350 connections. This may or may not be an issue with my stunnel configuration, but I ran across some old posts saying that stunnel by default has a hard limit of around 500 connections and, to get around this, to set FD_SETSIZE at compile time (I found this on the troubleshooting page - http://www.stunnel.org/faq/troubleshooting.html) However, one of the release notes recently also had a comment saying 'no more FD_SETSIZE limit!' - http://www.mail-archive.com/[email protected]/msg38373.html. So my questions are: 1) Does FD_SETSIZE still exist in Stunnel 4.34 and could it be a reason why I am seeing a limit on the number of people that can make a connection? I already tried running stunnel after setting ulimit -Hn and ulimit -Sn to 4096, and it did not seem to make a difference. 2) More noobish question - how do I set the FD_SETSIZE at compile time? I saw in the troubleshooting that it said to do "-DFD_SETSIZE=4096" at compile time. Is this something I should be adding in one of the Makefiles? Some more info about my setup: - I am using stunnel as a layer in front of Node.js to secure websockets and HTTP connections. - I'm running stunnel 4.34 - I am running stunnel from a startup script in /etc/init.d - it runs as a daemon process - I run stunnel with no params, but with this config file - http://pastebin.com/3Yr80ma1 - uname -a output: Linux gomockingbird.com 2.6.18.8-linode22 #1 SMP Tue Nov 10 16:12:12 UTC 2009 i686 GNU/Linux - gcc -v output: Using built-in specs. Target: i486-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.3.3-5ubuntu4' --with-bugurl=file:///usr/share/doc/gcc-4.3/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.3 --program-suffix=-4.3 --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --enable-mpfr --enable-targets=all --with-tune=generic --enable-checking=release --build=i486-linux-gnu --host=i486-linux-gnu --target=i486-linux-gnu Thread model: posix gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) - openssl version output: OpenSSL 0.9.8g 19 Oct 2007 Thanks in advance for any help! -- Saikat

2 3

Many services on the same port (VirtualHost)
by Hugo 01 Nov '10

01 Nov '10

Hello all! Does anyone knows a way to make many services listening on the same port? I've got one stunnel4 server which allows me to crypt two http servers. The first service bind on port 465 and the second on 470. What I will is to let user access on the port 465 using 2 different ServerNames. Thank you in anticipation, and excuse me for my quite bad english =D

4 3

Re: [stunnel-users] stunnel-users Digest, Vol 75, Issue 13
by Hugo 31 Oct '10

31 Oct '10

It's what I wanted to do: redirect the public 443 port on the correct local stunnel "accept:" port or service. I'd set 3 services with 3 different certificates on 3 ports. By eg, my first domain is ssl.example.com and the second admin.example.com. These two records point on the same IP. Stunnel has two services on that, so it binds two ports (!=443) (eg, 7100 and 7200) Is there a way to stunnel (or another program) bind on port 443 and, if user connects on ssl.example.com, forward frames/respond using the service/port 7100, and the same for admin.example.com on 7200? https://ssl.example.com ==> https://ssl.example.com:7100 https://admin.example.com ==>https://admin.example.com:7200 ? Thanks Message: 2 Date: Sat, 30 Oct 2010 11:45:19 -0400 (EDT) From: Jon Daley <stunnel(a)jon.limedaley.com> To: stunnel-users(a)mirt.net Subject: Re: [stunnel-users] Many services on the same port (VirtualHost) Message-ID: <alpine.DEB.2.00.1010301139120.19689(a)orange.limedaley.com> Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed On Sat, 30 Oct 2010, Hugo wrote: > Does anyone knows a way to make many services listening on the same port? > I've got one stunnel4 server which allows me to crypt two http servers. > The first service bind on port 465 and the second on 470. > What I will is to let user access on the port 465 using 2 different > ServerNames. I am not sure what you are trying to do. You want clients to connect via https to ports 465 on two different IPs and then stunnel to forward them to the appropriate http daemon? I am not sure if stunnel works in that method - that is the reverse of what I use stunnel for - I connect via an unencrypted connection, and forward via stunnel to an encrypted daemon. And if you are talking about virtually hosting https connections, that will work, as long as the certificate contains both servernames - you can't use two different certificates, because you don't know which certificate to serve until after the connection is encrypted.

2 2

Re: [stunnel-users] Many services on the same port (VirtualHost)
by Hugo 30 Oct '10

30 Oct '10

Thanks for the answer, but it seems I haven't got access to IPTables (my stunnel is on a remote shell service) and I think using a webserver is not a good solution for that case. So does anyone knows a program able to bind on a single port, and redirect requests on another depending on the domain name? Thanks you in anticipation Hugo On 30/10/2010 17:02, Pierre DELAAGE wrote: > Hello, > The answer is simply NO in stunnel, > but yes in Apache. > If you are joining one "http server", hosting many virtual hosts, > it should be "trivial". > I recommend using IP based hosting. > > I guess you want to act as a transparent gateway/proxy to https servers : > there is another way to proceed if you have a linux PC on your network > that can act as a routing/gateway: > with iptables you can do redirection to stunnel and get what you want. > Sorry but it is a little bit complicated to develop more now. > > Hope this helps, > Pierre Delaage > > > Le 30/10/2010 17:12, Hugo a écrit : >> Hello all! >> >> Does anyone knows a way to make many services listening on the same port? >> I've got one stunnel4 server which allows me to crypt two http servers. >> The first service bind on port 465 and the second on 470. >> What I will is to let user access on the port 465 using 2 different >> ServerNames. >> >> Thank you in anticipation, and excuse me for my quite bad english =D >> >> >> >> _______________________________________________ >> stunnel-users mailing list >> stunnel-users(a)mirt.net >> http://stunnel.mirt.net/mailman/listinfo/stunnel-users >

2 1

Re: [stunnel-users] openssl cross compiling for windows
by Jon Daley 30 Oct '10

30 Oct '10

On Wed, 27 Oct 2010, Jon Daley wrote: > On Wed, 27 Oct 2010, Michal Trojnara wrote: >> Jon Daley wrote: >>>> 3. Cross-compile OpenSSL: >>>> ./Configure --cross-compile-prefix=i586-mingw32msvc- mingw shared >>>> zlib-dynamic >>>> make >>> And you end up with 3 dlls in the openssl directory? >> >> Not really. Just 2 of them. Zlib is produced in step 2. > Hrm. I wasn't talking about the zlib1.dll. I meant: > ssleay32.dll, libssl32.dll and libeay32.dll. Maybe I got mixed up the names, > and am using one that I don't need. I thought I put them in one at a time, > and waited for Windows to ask me for them, but I'll check again. Ah, yes. I am dumb. I can compile and run it without problems with just the two *eay32 dlls. And we've finally figured out the other bug, where it works on my computer, and not on someone else's. It has to do with ipv6 support, and it didn't go away even after I ./config --disable-ipv6, which that flag is (mostly?) ignored in the windows builds, due to the dynamic LoadLibrary calls. On one computer, stunnel connects on the ipv6 port, but then when running "telnet localhost 7000", it connects via the ipv4 port, and so fails. If we force stunnel to use ipv4 by using 127.0.0.1 instead of localhost, everything works fine. My guess is that his computer is partially/incorrectly configured for ipv6, and so that is the reason for the failure. I'm planning on removing the LoadLibrary calls to force ipv6 to be off, though it'd be nice to not do that, since someday, there will be an ipv6-only network that we'll have to deal with presumably. -- Jon Daley http://jon.limedaley.com ~~ For many people, one of the most frustrating aspects of life is not being to understand other people's behavior. We see them as "guilty" instead of "innocent." -- Unknown

2 2

Re: [stunnel-users] openssl cross compiling for windows
by Jon Daley 27 Oct '10

27 Oct '10

On Wed, 27 Oct 2010, Michal Trojnara wrote: > 1. Install mingw32 tools: > apt-get install mingw32 Yes, I did that. > 2. Cross-compile and install zlib > (see the zlib documentation for details) Yes, I was doing that, but then was leaving it out since I don't need it (AFAIK). > 3. Cross-compile OpenSSL: > ./Configure --cross-compile-prefix=i586-mingw32msvc- mingw shared > zlib-dynamic > make And you end up with 3 dlls in the openssl directory? > 4. Cross-compile stunnel: > cd src > make stunnel.exe I can compile stunnel.exe fine, I just can't run it, because I don't have all three of the dlls. -- Jon Daley http://jon.limedaley.com ~~ If you do a job too well, you will get stuck with it. -- Slous

2 1

openssl cross compiling for windows
by Jon Daley 27 Oct '10

27 Oct '10

I am trying to compile openssl and stunnel for Win32, using my Debian host. openssl compilation: ./Configure --cross-compile-prefix=i586-mingw32msvc- mingw shared no-zlib && make The only problem I'm having is that libssl32.dll is not being created. I have the other libssl* files: libssl.a libssl.dll.a libssl.pc So, then I download the precompiled dlls of openssl from here: http://www.slproweb.com/products/Win32OpenSSL.html But, they require an additional vc redistributable, and since it seems like I'm so close, it'd be nice to finish it off the rest of the way. stunnel compiles fine pointing it at the openssl directory, but on run-time, it complains that libssl32.dll can't be found. Thanks. -- Jon Daley http://jon.limedaley.com ~~ There are no traffic jams when you go the extra mile. -- Anonymous

2 1

Stunnel dropping data on binary uploads from most browsers.
by Bill Crowell 16 Oct '10

16 Oct '10

All, I'm hoping that someone can assist with this. I'm using Stunnel on 2 different systems: Mac and FC 13 to front-end my web server for a custom database system. It works flawlessly except for uploading large binary files. The problem comes when trying to upload say a 2.5MB image file. The number of bytes actually transferred to the exec program is usually under 1K or right at about 33K. Using Firefox on Windows works all the time. I can observe the transfer by watching the stunnel.log file. When the data is piped into the openSSL engine, the number of bytes written to socket is being picked up by the exec program and processed so the loss is between the browser and the output side of Stunnel. The message itself is a multi-part message that is not mime-encoded. The part with the image is set in the boundary properly and contains the JPEG binary. (Thanks to HTTPwatch!) My Stunnel Version is: [root@linux log]# stunnel -version stunnel 4.33 on i386-redhat-linux-gnu with OpenSSL 1.0.0a-fips 1 Jun 2010 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = daemon.notice pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = ALL:!aNULL:!eNULL:!SSLv2 session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none My configuration file on the Linux box is: cert = /etc/stunnel/server.crt key = /etc/stunnel/server.key debug = 7 output = /var/log/stunnel.log ;socket = l:SO_LINGER=1:60 ;socket = r:TCP_NODELAY=1 client = no sslVersion = SSLv3 [https] libwrap = no accept = 443 exec = /usr/qmsys/bin/qm execargs = /usr/qmsys/bin/qm -b7 -quiet -aPAVUK "P.HTTP" options = DONT_INSERT_EMPTY_FRAGMENTS TIMEOUTidle = 30 TIMEOUTbusy = 5 TIMEOUTclose = 0 *** A RANDOM SUCCESSFUL TRANSFER *** 2010.10.15 10:03:12 LOG7[946:3078133552]: Service https accepted FD=0 from 24.171.161.99:1998 2010.10.15 10:03:12 LOG7[946:3078241136]: Service https started 2010.10.15 10:03:12 LOG7[946:3078241136]: FD=0 in non-blocking mode 2010.10.15 10:03:12 LOG5[946:3078241136]: Service https accepted connection from 24.171.161.99:1998 2010.10.15 10:03:12 LOG7[946:3078241136]: SSL state (accept): before accept initialization 2010.10.15 10:03:12 LOG7[946:3078241136]: SSL state (accept): SSLv3 read client hello A 2010.10.15 10:03:12 LOG7[946:3078241136]: SSL state (accept): SSLv3 write server hello A 2010.10.15 10:03:12 LOG7[946:3078241136]: SSL state (accept): SSLv3 write change cipher spec A 2010.10.15 10:03:12 LOG7[946:3078241136]: SSL state (accept): SSLv3 write finished A 2010.10.15 10:03:12 LOG7[946:3078241136]: SSL state (accept): SSLv3 flush data 2010.10.15 10:03:12 LOG7[946:3078241136]: SSL state (accept): SSLv3 read finished A 2010.10.15 10:03:12 LOG7[946:3078241136]: 8 items in the session cache 2010.10.15 10:03:12 LOG7[946:3078241136]: 0 client connects (SSL_connect()) 2010.10.15 10:03:12 LOG7[946:3078241136]: 0 client connects that finished 2010.10.15 10:03:12 LOG7[946:3078241136]: 0 client renegotiations requested 2010.10.15 10:03:12 LOG7[946:3078241136]: 35 server connects (SSL_accept()) 2010.10.15 10:03:12 LOG7[946:3078241136]: 35 server connects that finished 2010.10.15 10:03:12 LOG7[946:3078241136]: 0 server renegotiations requested 2010.10.15 10:03:12 LOG7[946:3078241136]: 27 session cache hits 2010.10.15 10:03:12 LOG7[946:3078241136]: 0 external session cache hits 2010.10.15 10:03:12 LOG7[946:3078241136]: 0 session cache misses 2010.10.15 10:03:12 LOG7[946:3078241136]: 0 session cache timeouts 2010.10.15 10:03:12 LOG6[946:3078241136]: SSL accepted: previous session reused 2010.10.15 10:03:12 LOG6[946:3078241136]: Local mode child started (PID=1179) 2010.10.15 10:03:12 LOG7[946:3078241136]: Remote FD=13 initialized 2010.10.15 10:03:13 LOG7[946:3078241136]: Socket closed on read 2010.10.15 10:03:13 LOG7[946:3078241136]: SSL write shutdown 2010.10.15 10:03:13 LOG7[946:3078241136]: SSL alert (write): warning: close notify 2010.10.15 10:03:13 LOG6[946:3078241136]: SSL_shutdown successfully sent close_notify 2010.10.15 10:03:13 LOG6[946:3078241136]: s_poll_wait timeout: connection close 2010.10.15 10:03:13 LOG5[946:3078241136]: Connection closed: 2895 bytes sent to SSL, 2469539 bytes sent to socket 2010.10.15 10:03:13 LOG7[946:3078241136]: Service https finished (0 left) 2010.10.15 10:03:13 LOG7[946:3078133552]: Cleaning up the signal pipe 2010.10.15 10:03:13 LOG6[946:3078133552]: Child process 1179 finished with code 0 2010.10.15 10:03:13 LOG7[946:3078133552]: Signal pipe is empty *** MOST OF THE TIME - AN UNSUCCESSFUL TRANSFER *** 2010.10.15 10:05:01 LOG7[946:3078133552]: Service https accepted FD=0 from 24.171.161.99:1985 2010.10.15 10:05:01 LOG7[946:3077921648]: Service https started 2010.10.15 10:05:01 LOG7[946:3077921648]: FD=0 in non-blocking mode 2010.10.15 10:05:01 LOG5[946:3077921648]: Service https accepted connection from 24.171.161.99:1985 2010.10.15 10:05:01 LOG7[946:3077921648]: SSL state (accept): before/ accept initialization 2010.10.15 10:05:01 LOG7[946:3077921648]: SSL state (accept): SSLv3 read client hello A 2010.10.15 10:05:01 LOG7[946:3077921648]: SSL state (accept): SSLv3 write server hello A 2010.10.15 10:05:01 LOG7[946:3077921648]: SSL state (accept): SSLv3 write change cipher spec A 2010.10.15 10:05:01 LOG7[946:3077921648]: SSL state (accept): SSLv3 write finished A 2010.10.15 10:05:01 LOG7[946:3077921648]: SSL state (accept): SSLv3 flush data 2010.10.15 10:05:01 LOG7[946:3077921648]: SSL state (accept): SSLv3 read finished A 2010.10.15 10:05:01 LOG7[946:3077921648]: 9 items in the session cache 2010.10.15 10:05:01 LOG7[946:3077921648]: 0 client connects (SSL_connect()) 2010.10.15 10:05:01 LOG7[946:3077921648]: 0 client connects that finished 2010.10.15 10:05:01 LOG7[946:3077921648]: 0 client renegotiations requested 2010.10.15 10:05:01 LOG7[946:3077921648]: 44 server connects (SSL_accept()) 2010.10.15 10:05:01 LOG7[946:3077921648]: 44 server connects that finished 2010.10.15 10:05:01 LOG7[946:3077921648]: 0 server renegotiations requested 2010.10.15 10:05:01 LOG7[946:3077921648]: 35 session cache hits 2010.10.15 10:05:01 LOG7[946:3077921648]: 0 external session cache hits 2010.10.15 10:05:01 LOG7[946:3077921648]: 0 session cache misses 2010.10.15 10:05:01 LOG7[946:3077921648]: 0 session cache timeouts 2010.10.15 10:05:01 LOG6[946:3077921648]: SSL accepted: previous session reused 2010.10.15 10:05:01 LOG6[946:3077921648]: Local mode child started (PID=1213) 2010.10.15 10:05:01 LOG7[946:3077921648]: Remote FD=13 initialized 2010.10.15 10:05:04 LOG7[946:3077921648]: Socket closed on read 2010.10.15 10:05:04 LOG7[946:3077921648]: SSL write shutdown 2010.10.15 10:05:04 LOG7[946:3077921648]: SSL alert (write): warning: close notify 2010.10.15 10:05:04 LOG6[946:3077921648]: SSL_shutdown successfully sent close_notify 2010.10.15 10:05:04 LOG6[946:3077921648]: s_poll_wait timeout: connection close 2010.10.15 10:05:04 LOG5[946:3077921648]: Connection closed: 2895 bytes sent to SSL, 66703 bytes sent to socket 2010.10.15 10:05:04 LOG7[946:3077921648]: Service https finished (0 left) 2010.10.15 10:05:04 LOG7[946:3078133552]: Cleaning up the signal pipe 2010.10.15 10:05:04 LOG6[946:3078133552]: Child process 1213 finished with code 0 2010.10.15 10:05:04 LOG7[946:3078133552]: Signal pipe is empty *** All test cases are the same upload of the same image file. In all tests the number of bytes sent to socket matches what the exec program is receiving in its pipe. My feeling is that there is a connection issue between the browser and Stunnel. The successful upload of the test occurs sometimes with all browsers and appears to always work with Firefox for Windows. It has a 90% failure rate on Safari for Windows, Safari for Mac, Opera for Windows, Opera for Mac, etc. In all cases of testing, the number of bytes "sent to socket" is received by my exec program and consists of a truncated message from the browser. It appears that the data is simply being truncated somewhere in the Stunnel process. Any help is always appreciated! If there are more tests to be run to track down the problem, please advise and I will run them. Regards, Bill Bill Crowell, President Pavuk Technologies, LLC PO Box 33097 Charlotte, NC 28233-3097 Office +1 704.248.0024 Mobile +1 704.607.6077 Skype pavuk.com

2 1

Recompiling Stunnel at version 4.34 appears to fix dropped data problem
by Bill Crowell 15 Oct '10

15 Oct '10

I reported a consistent data loss from most browsers when transferring large files. Compiling version 4.34 on Mac OS X 10.6.4 with the latest Xcode toolkit has resolved the connection problem for all browsers that I have tested except for Safari 5.0 on both Windows and Mac. It has also fixed a connection problem with IE 6 which was not accepting any connection to Stunnel prior to this installation. *** This problem still persists on my linux box running 4.33 installed from FC13. I will attempt a compile of 4.34 and see if this fixes the problem there as well. Fedora does not yet have a package for 4.34. Bill Bill Crowell, President Pavuk Technologies, LLC PO Box 33097 Charlotte, NC 28233-3097 Office +1 704.248.0024 Mobile +1 704.607.6077 Skype pavuk.com

1 0

Re: [stunnel-users] stunnel daemon mode
by Joe Williams 08 Oct '10

08 Oct '10

> In inetd mode, you get a new Stunnel process for every connection. > Initialization must occur in *each* new process - they don't share > any state, including any session ids. > > In daemon mode, there's one stunnel process (threaded) which can > share state between threads, so it is much better. Ah I see, so running a single process (w/ pthreads) under runit I get the same effect as daemon mode. Correct? -Joe Name: Joseph A. Williams Email: joe(a)joetify.com Blog: http://www.joeandmotorboat.com/ Twitter: http://twitter.com/williamsjoe

1 0

stunnel daemon mode
by Joe Williams 07 Oct '10

07 Oct '10

According to http://www.sans.org/reading_room/whitepapers/vpns/stunnel-ssling-internet-s… In addition, Stunnel performance is improved by running it in daemon mode instead of inetd. Running Stunnel in daemon mode provides the following benefits: no SSL initialization necessary with every connection, and SSL session caching. Is this still the case? Running in the foreground you don't get these? Thanks. -Joe Name: Joseph A. Williams Email: joe(a)joetify.com Blog: http://www.joeandmotorboat.com/ Twitter: http://twitter.com/williamsjoe

1 0

fingerprint does not match
by Nelson 02 Oct '10

02 Oct '10

I have a running machine with stunnel installed for HTTPS services. Now, I want to setup another machine using the same configuration and key from my 1ST machine. I have installed stunnel patch with x-forwarded-for. However, everytime I try to start it up, it shows: Starting universal SSL tunnel: stunnelReading configuration from file /usr/local/etc/stunnel/stunnel.conf FIPS_mode_set: 2D06C06E: error:2D06C06E:FIPS routines:FIPS_mode_set:fingerprint does not match failed. I'm using the same key and cert that my 1ST machine is using. Would there be a problem? I've no problem starting stunnel yesterday. I just encountered this error when I change my ip address. I make sure that my config also listen to this ip address. Would anyone know how to fix this problem? Tried to Google but to no avail.

3 2

pop3 stunnel nmh to gmail
by Joseph Brenner 27 Sep '10

27 Sep '10

I'm an nmh user running ubuntu jaunty, and I want to get my local email working over SSL connections to a gmail account (POP3/SMTP). So I'm trying to get some form of mh to talk over SSL using stunnel4. I'm looking for suggestions on what I might be doing wrong, and hints on how to go about isolating the problems. I've succeeded in using slypheed to get mail from gmail, so I know the gmail account is working and is set-up for pop3 and so on. When I run mh's inc command, though, it just reports: "inc: no servers available" I can see that I've got stunnel running by doing a: ps ax | egrep stun | egrep -v egrep 5937 ? SN 0:00 /usr/bin/stunnel4 /etc/stunnel/stunnel.conf 5938 ? SN 0:00 /usr/bin/stunnel4 /etc/stunnel/stunnel.conf 5939 ? SN 0:00 /usr/bin/stunnel4 /etc/stunnel/stunnel.conf 5940 ? SN 0:00 /usr/bin/stunnel4 /etc/stunnel/stunnel.conf 5941 ? SN 0:00 /usr/bin/stunnel4 /etc/stunnel/stunnel.conf 5942 ? SNs 0:00 /usr/bin/stunnel4 /etc/stunnel/stunnel.conf Google has some instructions up about servers and port numbers (but no examples specific to stunnel): http://mail.google.com/support/bin/answer.py?hl=en&answer=13287 Here's a summary of the kind of configurations I've been trying: /etc/default/stunnel4: ENABLED=1 FILES="/etc/stunnel/*.conf" OPTIONS="" PPP_RESTART=0 /etc/stunnel/stunnel.conf: sslVersion = SSLv3 chroot = /var/lib/stunnel4/ setuid = stunnel4 setgid = stunnel4 pid = /stunnel4.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = /var/log/stunnel4/stunnel.log client = yes [pop3s] accept = 127.0.0.1:995 connect = pop.gmail.com:110 [smtps] accept = 127.0.0.1:465 connect = smtp.gmail.com:25 /etc/nmh/mts.conf: mts: smtp hostable: /etc/nmh/hosts localname: smtp.gmail.com # localname: gmail.com masquerade: mmdfldir: /var/mail mmdflfil: # pophost: localhost # pophost: pop.gmail.com:995 pophost: pop.gmail.com:110 # pophost: pop.gmail.com # servers: localhost servers: smtp.gmail.com /var/log/stunnel4/stunnel.log 2010.09.21 11:11:41 LOG7[6528:140533218399984]: Snagged 64 random bytes from /dev/urandom 2010.09.21 11:11:41 LOG7[6528:140533218399984]: RAND_status claims sufficient entropy for the PRNG 2010.09.21 11:11:41 LOG7[6528:140533218399984]: PRNG seeded successfully 2010.09.21 11:11:41 LOG7[6528:140533218399984]: SSL context initialized for service pop3s 2010.09.21 11:11:41 LOG7[6528:140533218399984]: SSL context initialized for service imaps 2010.09.21 11:11:41 LOG7[6528:140533218399984]: SSL context initialized for service smtps 2010.09.21 11:11:41 LOG5[6528:140533218399984]: stunnel 4.22 on x86_64-pc-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007 2010.09.21 11:11:41 LOG5[6528:140533218399984]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2010.09.21 11:11:41 LOG6[6528:140533218399984]: file ulimit = 1024 (can be changed with 'ulimit -n') 2010.09.21 11:11:41 LOG6[6528:140533218399984]: poll() used - no FD_SETSIZE limit for file descriptors 2010.09.21 11:11:41 LOG5[6528:140533218399984]: 500 clients allowed 2010.09.21 11:11:41 LOG7[6528:140533218399984]: FD 10 in non-blocking mode 2010.09.21 11:11:41 LOG7[6528:140533218399984]: FD 11 in non-blocking mode 2010.09.21 11:11:41 LOG7[6528:140533218399984]: FD 12 in non-blocking mode 2010.09.21 11:11:41 LOG7[6528:140533218399984]: SO_REUSEADDR option set on accept socket 2010.09.21 11:11:41 LOG7[6528:140533218399984]: pop3s bound to 127.0.0.1:1109 2010.09.21 11:11:41 LOG7[6528:140533218399984]: FD 13 in non-blocking mode 2010.09.21 11:11:41 LOG7[6528:140533218399984]: SO_REUSEADDR option set on accept socket 2010.09.21 11:11:41 LOG7[6528:140533218399984]: imaps bound to 0.0.0.0:993 2010.09.21 11:11:41 LOG7[6528:140533218399984]: FD 14 in non-blocking mode 2010.09.21 11:11:41 LOG7[6528:140533218399984]: SO_REUSEADDR option set on accept socket 2010.09.21 11:11:41 LOG7[6528:140533218399984]: smtps bound to 127.0.0.1:259 2010.09.21 11:11:41 LOG7[6534:140533218399984]: Created pid file /stunnel4.pid /var/log/mail.log Sep 21 13:40:32 fineline gnu-pop3d[15484]: Incoming connection opened Sep 21 13:40:32 fineline gnu-pop3d[15484]: connect from 127.0.0.1 Sep 21 13:40:32 fineline gnu-pop3d[15484]: User `doomvox(a)gmail.com': nonexistent Sep 21 13:40:32 fineline gnu-pop3d[15484]: Session ended for no user I'm using the "stunnel4" package for ubuntu jaunty: /usr/bin/stunnel4 -version stunnel 4.22 on x86_64-pc-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /var/run/stunnel4.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = /etc/stunnel/stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none uname -a Linux fineline 2.6.24-16-generic #1 SMP Thu Apr 10 12:47:45 UTC 2008 x86_64 GNU/Linux gcc -v Using built-in specs. Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.3.3-5ubuntu4' --with-bugurl=file:///usr/share/doc/gcc-4.3/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.3 --program-suffix=-4.3 --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --enable-mpfr --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) openssl version OpenSSL 0.9.8g 19 Oct 2007

2 1

Critical error on stunnel 434 for WinCE/Windows Mobile: no service at all, because of failure in thread creation
by Pierre DELAAGE 26 Sep '10

26 Sep '10

Hello Michal, Maybe you remember me, I am the man that refreshed stunnel for winCE up to 4.27 version. Thank you for having included my code to your mainstream at that time. As a win32 regular programmer I always check that my code is as close as possible as that of the main win32 stream for PC. I am writing you today to point out a critical bug that prevent stunnel 4.34 from servicing any service at all . I have fixed that bug and will send you a refresh of all the sources (that needed some after some win32 PC version updates) soon. SO DO NOT DO ANYTHING. the bug is in sthread.c: the wince _beginthread port has been modified (by someone else but me) as this : v434: handle=CreateThread(NULL, stack_size, (LPTHREAD_START_ROUTINE)start_address, arglist, STACK_SIZE_PARAM_IS_A_RESERVATION, &thread_id); the "STACK_SIZE_PARAM_IS_A_RESERVATION" flag is the novelty from 4.27. The problem is that beginthread is being called from gui.c with stacksize=0 SO THAT a stack of 0 size "TRIES to be RESERVED" and then CreateThread FAILS to return a valid handle. That is to say that no thread is created, and thus NO TUNNELING SERVICE at all can be delivered. So stunnel cannot work at all. Solution : the proper call is : handle=CreateThread(NULL, stack_size, (LPTHREAD_START_ROUTINE)start_address, arglist, (stack_size > 0) ? STACK_SIZE_PARAM_IS_A_RESERVATION:0, &thread_id); I repeat and insist : please DO NOT DO anything to the code, as I will send soon a refresh with various other updates (because apart from that critical bug, the code needs other refresh to compile properly), and as I am also working on a refresh of openssl up to 1.0.0a (those gentlemen at openssl never included any wce patch to their mainstream, which is really a pity, but another story). See you soon, Thank you again for all the work you do for the community of people, Pierre

2 4

stunnel v4.32 & mac v10.6.3
by Cherry Ngai 25 Sep '10

25 Sep '10

Hello, I am new to stunnel. My stunnel v4.32 is installed to my mac v10.6.3 using MacPort. I am trying to setup active directory, but there is no process start when i run sudo /opt/local/bin/stunnel /opt/local/etc/stunnel/stunnel.conf There is no error msg after i run the command. I believe it could have something to do with my configuration? Having it running in debug mode, I can't find the created output file. Could someone help me? Or tell me where i can find the output file? Thanks! Stunnel seems successfully installed, as it has returned the following with the command "sudo stunnel -version" stunnel 4.32 on i686-apple-darwin10.3.0 with OpenSSL 1.0.0a 1 Jun 2010 Threading:PTHREAD SSL:ENGINE Sockets:SELECT,IPv6 Auth:LIBWRAP Global options debug = daemon.notice pid = /opt/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /opt/local/etc/stunnel/stunnel.pem ciphers = ALL:!aNULL:!eNULL:!SSLv2 session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none Here is my config: cert = /opt/local/etc/stunnel/stunnel.pem key = /opt/local/etc/stunnel/stunnel.pem sslVersion = SSLv3 chroot = /opt/local/var/lib/stunnel/ setuid = nobody setgid = nogroup pid = /stunnel.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = stunnel.log client = yes [ActiveDirectory1] accept = 391 connect = SOME_IP:636 Cheers, Cherry

1 0

Target version/timeframe for drawing identity certs from Windows cert store?
by Bucci, David G 22 Sep '10

22 Sep '10

Hi - in an exchange last week, Michal, it sounded like you might be planning on adding the capability/option to the Windows version to select an identity certificate from the Windows certificate store (because it turns out OpenSSL added some supporting infrastructure for doing so, if I understood correctly). For planning purposes, do you have any sense yet of whether that's really going to happen, and in what timeframe or what target version? I think that'd be a change of high interest to a lot of people ... one suggestion, it would help integrators if there was a way to configure a msg into whatever selection dialog that comes up, asking the user to select a certificate from their identity store. Thinking out loud -- probably also, in the case where multiple client tunnels are being set up, a way to make it either a global selection (for all client services), or a service specific selection -- hmm, though global only is probably fine, thinking about, since an integrator could always create a 2nd config, if a 2nd tunnel is needed Thinking further, you would probably want to be careful that it would work early on during login, since I imagine like us, integrators would want to start it from a user's Startup folder, or from a login script. I don't know Windows well enough to know if that constrains you (if the window mgr is up during login script exec, etc.). Thx! ---- David G. Bucci If you can't think of anything kind to say, could you at least have the decency to be vague?

1 0

Server side logging, no connection details logged
by Bucci, David G 22 Sep '10

22 Sep '10

Hi - using Stunnel to enforce client certificate based authentication, and as part of that, we want to log accesses, and the CN used to access, on the server side (kind of an audit log). On the client side, with debug set to 7, we get details about the connection, the SSL steps in the handshake, etc. - but on the server side, even with debug = 7, we're not seeing any info at all about the connections that are occurring. Sooo ... is there a way to enable such logging on the server side of the tunnel? Or possibly turn on independent logging in the OpenSSL libs that are used? I looked, but haven't found anything online about this. Thx! ---- David G. Bucci If you can't say anything nice, at least have the decency to be vague.

1 2

FIPS compliance
by Bucci, David G 21 Sep '10

21 Sep '10

The documentation on fips= seems ambiguous to me ... does leaving it at the default of "yes" /prevent/ FIPS 140-2 compliance mode, or mandate it? Or does it do something else I'm not understanding? Basically, the q. is, what do you have to configure to ensure that you're operating in a FIPS 140-2 compliant manner (at least, as the version of OpenSSL libs bundled understood it)? Do you have to specify ciphers that are validated, etc.? Or just set that config option to "yes" ("no"?)? And how can one tell if the stunnel binary in use was compiled with FIPS support active? (I'm using the Windows 4.33 binary d/l'ed from mirt.net) Tia! ---- David G. Bucci Chuck Norris can kick through all 6 degrees of separation, hitting anyone, anywhere, in the face, at any time. -- ChuckNorrisFacts.com

2 1

Large performance difference: Solaris vs Linux
by Cliffe, Stephen 20 Sep '10

20 Sep '10

Hi, I've just been comparing the performance of stunnel on Solaris 10 & Linux (Centos 5.5) and am seeing a big difference. I'm using stunnel 4.33 compiled with the same options on both platforms and the tcpstress benchmarking tool (http://stunnel.mirt.net/?page=perf) On a Dell 780 running Solaris 10 I got 163.31 connections/second but on an older, slower Dell 620 running Linux I got 408.01 connections/second. Both machines were otherwise idle. Does anyone know why there would be such a big difference between the two OS's? Thanks, Steve. Steve Cliffe Senior Engineer - Development Infrastructure Team Andrew Network Solutions Asia Pacific [ Address : Andrew Corporation Building (39), Northfields Avenue, Wollongong University, NSW, Australia 2500 ] [ Postal Address : PO Box U40, Wollongong University, NSW, Australia 2500 ] [ Tel : +61 2 4221 2991] [ Fax : +61 2 4221 2901 ] [ Email : Stephen.Cliffe(a)andrew.com] Visit Andrew on the Web at www.andrew.com<http://www.andrew.com/> [cid:[email protected]][cid:[email protected]]

3 5

Generically referencing file locations in stunnel.conf
by Bucci, David G 20 Sep '10

20 Sep '10

Hi - I'm back to trying to run Stunnel with a different user certificate for each user. So far, the best technique I've found is to have a separate stunnel.conf for each user (in their home directory, which is referenced by envvar %USERPROFILE%), and run stunnel using that configuration file. As part of that, I'm trying to generically reference file locations (log, user certificates) in the .conf. But I haven't found a way short of fully pathing the locations in the .conf e.g. "output=c:\users\dbucci\stunnel\stunnel.log". That's undesirable, because it means I have to make every user's .conf unique. So ... is there a generic way to accomplish this? I've tried setting the "Start In" location in the Windows shortcut to that location (via envvar %USERPROFILE%, which allows me to make every user's shortcut generic), then saying "output=.\stunnel.log", but without success - it seems to always be using c:\program files\stunnel as it's starting point for reference. Likewise, the envvar isn't usable in the .conf Note that I thought about creating a subdir per user in C:\program files\stunnel (with appropriate perms for that user), but can't, because in many of our deployment locations, users aren't permitted to write to c:\program files. Btw, this is why I'm asking about the commandline parms in Windows - I don't seem to be able to get them to work, but if I could, I could say e.g. "-o %USERPROFILE%\stunnel\stunnel.log", and that would work generically for every user. Likewise, I could use "-A %USERPROFILE&\stunnel\usercert.pem" and have a generic way of installing user certs. Heck, if I could set ALL the options via command line (-c, -r, etc.) I would love to simply do away with a user-specific .conf file. So ... sorry for rambling a bit, but any help with the intent of what I'm trying to accomplish, make as generic as possible a user-specific config setup? Thx! ---- David G. Bucci Chuck Norris can kick through all 6 degrees of separation, hitting anyone, anywhere, in the face, at any time. -- ChuckNorrisFacts.com

2 2

Command line args available on Windows version 4.33?
by Bucci, David G 20 Sep '10

20 Sep '10

Hi - are all the command line arguments documented at http://www.stunnel.org/faq/args.html#ToC1 available in the Windows 4.33 version? When you execute stunnel -V, very few are listed. And if they are available, do they take precedence over a configuration file, if one is used? (Is a .conf mandatory, or can you set all the required options via command line in the Windows version?) Thx! ---- David G. Bucci Chuck Norris can kick through all 6 degrees of separation, hitting anyone, anywhere, in the face, at any time. -- ChuckNorrisFacts.com

2 1

Accept connections only from local processes?
by Bucci, David G 20 Sep '10

20 Sep '10

Hi - I'm looking to configure Stunnel in client mode to accept connections only from the PC it's running on. Would the config option "socket = a:SO_BINDTODEVICE=lo" accomplish that? And would this work on Windows? (is there a "lo" interface on Windows?) I'm going to do some testing, but thought I'd ask in case someone already knows I'll be pounding sand. And before anyone asks, turning on a firewall isn't an option - we don't have control of all the PCs involved. ---- David G. Bucci Chuck Norris can kick through all 6 degrees of separation, hitting anyone, anywhere, in the face, at any time. -- ChuckNorrisFacts.com

2 1

(no subject)
by Sunil Karumuri 17 Sep '10

17 Sep '10

Hello- I am new to Stunnel and have a basic architecture question. I have Stunnel installed on box A where it receives http messages from multiple client processes . Stunnel sends them to box B via https (mutual ssl). We are seeing that Stunnel opens one connection for each client processes. Can we configure Stunnel to have only ONE SSL connection (or a pool of connections) between box A and B and have Stunnel use the open connection for all traffic from various clients ? We would like to avoid the overhead of SSL-handshake for each new client process. Thanks for the help. Sunil

3 2

Hey buddy, can you review a log file?
by Jay Sprenkle 08 Sep '10

08 Sep '10

Good afterrnoon, Can anyone review the stunnel log file below and see if there's any indication of a problem? What we're doing with stunnel: We're using stunnel to encrypt a tcp connection between a client and our server. What's happening: A client is reporting the connection fails. I believe it's a timeout issue on the client software. My interpretation of this log is that the session is open about 4 seconds then closed by the client. Is that correct? Thanks in advance Stunnel Log: 2010.09.08 14:34:38 LOG7[1392:2328]: Service exchange started 2010.09.08 14:34:38 LOG7[1392:2328]: FD=200 in non-blocking mode 2010.09.08 14:34:38 LOG5[1392:2328]: Service exchange accepted connection from 127.0.0.1:2340 2010.09.08 14:34:38 LOG7[1392:2328]: FD=224 in non-blocking mode 2010.09.08 14:34:38 LOG6[1392:2328]: connect_blocking: connecting xxx.242.123.150:7443 2010.09.08 14:34:38 LOG7[1392:2328]: connect_blocking: s_poll_wait xxx.242.123.150:7443: waiting 10 seconds 2010.09.08 14:34:38 LOG5[1392:2328]: connect_blocking: connected xxx.242.123.150:7443 2010.09.08 14:34:38 LOG5[1392:2328]: Service exchange connected remote server from 192.168.1.29:2341 2010.09.08 14:34:38 LOG7[1392:2328]: Remote FD=224 initialized 2010.09.08 14:34:38 LOG7[1392:2328]: SSL state (connect): before/connect initialization 2010.09.08 14:34:38 LOG7[1392:2328]: SSL state (connect): SSLv3 write client hello A 2010.09.08 14:34:38 LOG7[1392:2328]: SSL state (connect): SSLv3 read server hello A 2010.09.08 14:34:39 LOG7[1392:2328]: SSL state (connect): SSLv3 read server certificate A 2010.09.08 14:34:39 LOG7[1392:2328]: SSL state (connect): SSLv3 read server done A 2010.09.08 14:34:39 LOG7[1392:2328]: SSL state (connect): SSLv3 write client key exchange A 2010.09.08 14:34:39 LOG7[1392:2328]: SSL state (connect): SSLv3 write change cipher spec A 2010.09.08 14:34:39 LOG7[1392:2328]: SSL state (connect): SSLv3 write finished A 2010.09.08 14:34:39 LOG7[1392:2328]: SSL state (connect): SSLv3 flush data 2010.09.08 14:34:39 LOG7[1392:2328]: SSL state (connect): SSLv3 read finished A 2010.09.08 14:34:39 LOG7[1392:2328]: 1 items in the session cache 2010.09.08 14:34:39 LOG7[1392:2328]: 1 client connects (SSL_connect()) 2010.09.08 14:34:39 LOG7[1392:2328]: 1 client connects that finished 2010.09.08 14:34:39 LOG7[1392:2328]: 0 client renegotiations requested 2010.09.08 14:34:39 LOG7[1392:2328]: 0 server connects (SSL_accept()) 2010.09.08 14:34:39 LOG7[1392:2328]: 0 server connects that finished 2010.09.08 14:34:39 LOG7[1392:2328]: 0 server renegotiations requested 2010.09.08 14:34:39 LOG7[1392:2328]: 0 session cache hits 2010.09.08 14:34:39 LOG7[1392:2328]: 0 external session cache hits 2010.09.08 14:34:39 LOG7[1392:2328]: 0 session cache misses 2010.09.08 14:34:39 LOG7[1392:2328]: 0 session cache timeouts 2010.09.08 14:34:39 LOG6[1392:2328]: SSL connected: new session negotiated 2010.09.08 14:34:39 LOG6[1392:2328]: Negotiated ciphers: RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 2010.09.08 14:34:44 LOG7[1392:2328]: SSL socket closed on SSL_read 2010.09.08 14:34:44 LOG7[1392:2328]: Socket write shutdown 2010.09.08 14:34:44 LOG5[1392:2328]: Connection closed: 8 bytes sent to SSL, 48 bytes sent to socket 2010.09.08 14:34:44 LOG7[1392:2328]: Service exchange finished (0 left) -- --- "Is real reporting dead? News at 11!"

1 0

Re: [stunnel-users] Individual user certs for each person who uses Windows PC
by Bucci, David G 07 Sep '10

07 Sep '10

Thx for replying, Scott ... how did you handle multiple users on the PC, though? They all shared that cert? I thought about having a single location and copying to there on user login (from a standard location in a user's home dir, e.g.) ... then firing up stunnel ... but it seems like so much can go wrong, resulting in User B accessing using User A's certificate (because the copy failed, e.g.). And we're leery of exposing User A's cert to User B - especially since stunnel doesn't support encryption of the user's key, right? So the permissions would be a little tricky and maybe fragile. Seems like there should be a straightforward way to do it, dadnabit! ________________________________ From: Scott Gifford <sgifford(a)suspectclass.com> To: Bucci, David G Cc: stunnel-users(a)mirt.net <stunnel-users(a)mirt.net> Sent: Mon Aug 30 17:41:09 2010 Subject: EXTERNAL: Re: [stunnel-users] Individual user certs for each person who uses Windows PC On Mon, Aug 30, 2010 at 3:41 PM, Bucci, David G <david.g.bucci(a)lmco.com<mailto:[email protected]>> wrote: [ ... ] I've tried using envvars in the stunnel.conf (e.g., cert = %USERPROFILE%\usercert.pem), tried adjusting the command line to include "-p %USERPROFILE%\usercert.pem" as an option ... We implemented something similar by simply making a "C:\stunnel" directory on each PC, naming the certificate the same thing on all machines, then hardcoding that path into the stunnel configuration (e.g. "C:\stunnel\usercert.pem"). Not quite as nice as %USERPROFILE%\usercert.pem, but it worked. :-) Hope this is helpful, ----Scott.

5 11

Honor --sysconfdir and --localstatedir in stunnel.conf-sample.in
by Sebastian Kayser 01 Sep '10

01 Sep '10

Hi, I am packaging stunnel for opencsw.org. Would you guys mind merging a patch [1] to make use of --sysconfdir and --localstatedir (instead of @prefix@/{etc,var}) in the sample configuration file? Currently, if --sysconfdir and --localstatedir are passed to ./configure and are not a directory below prefix, the configuration file doesn't reflect this layout. The patch is against 4.33. Fedora seems to carry the same change [2]. Sebastian [1]http://gar.svn.sf.net/svnroot/gar/csw/mgar/pkg/stunnel/trunk/files/0001-M… [2]http://lists.fedoraproject.org/pipermail/scm-commits/2010-March/413078.ht…

3 4

[[email protected]: Bug#594876: stunnel4: Fails to connect, "Input line too long"]
by Rodrigo Gallardo 31 Aug '10

31 Aug '10

----- Forwarded message from Harri Kiiskinen <harri.kiiskinen(a)utu.fi> ----- Date: Mon, 30 Aug 2010 13:26:07 +0300 From: Harri Kiiskinen <harri.kiiskinen(a)utu.fi> To: Debian Bug Tracking System <submit(a)bugs.debian.org> Subject: Bug#594876: stunnel4: Fails to connect, "Input line too long" Package: stunnel4 Version: 3:4.29-1local1 Severity: normal My Univ. recently updated their mail servers, and I could not read my mails anymore with Emacs/mew, that uses stunnel4 for encryption. It turned out the reason was, that the server responded with this string: * OK [CAPABILITY STARTTLS CAPABILITY IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY UNSELECT SORT LANGUAGE IDLE XSENDER X-NETSCAPE XSERVERINFO X-SUN-SORT X-SUN-IMAP X-ANNOTATEMORE X-UNAUTHENTICATE XUM1 AUTH=PLAIN AUTH=PLAIN] Messaging Multiplexor (Sun Java(tm) System Messaging Server 7.3-11.01 (built Sep 1 2009)) It turned out that this was way much longer than what stunnel4 expects. In common.h, one finds #define STRLEN 256 When this is changed to #define STRLEN 512 and the package recompiled, everything works well. Perhaps the length of accepted strings should be increased? Or is this long a response against some standard? All the best, Harri K. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-3-686 (SMP w/1 CPU core) Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages stunnel4 depends on: ii adduser 3.112 add and remove users and groups ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libssl0.9.8 0.9.8o-1 SSL shared libraries ii libwrap0 7.6.q-19 Wietse Venema's TCP wrappers libra ii netbase 4.42 Basic TCP/IP networking system ii openssl 0.9.8o-1 Secure Socket Layer (SSL) binary a ii perl-modules 5.10.1-14 Core Perl modules stunnel4 recommends no packages. Versions of packages stunnel4 suggests: pn logcheck-database <none> (no description available) -- Configuration Files: /etc/stunnel/stunnel.conf changed [not included] -- no debconf information ----- End forwarded message ----- -- Rodrigo Gallardo

2 1

Individual user certs for each person who uses Windows PC
by Bucci, David G 30 Aug '10

30 Aug '10

Hi, all - I've searched, but can't find any answer on this. Is it possible to configure stunnel with client certificates on, and in such a way that individual users who logon have their own individual certificate used? I've tried using envvars in the stunnel.conf (e.g., cert = %USERPROFILE%\usercert.pem), tried adjusting the command line to include "-p %USERPROFILE%\usercert.pem" as an option ... the closest I've been able to think of (and it's a pretty blunt sword) is to create individual services, one per user and listening on different ports, then having each user access a different URL (well, different port#) ... I would prefer this all work when running as a Windows service, but if it's necessary to train the users to hit a start menu entry or something (e.g., if there's a way to do it using envvars on command line parameters), then the world probably won't end ... This is on Windows, but I'd also appreciate knowing how to do the same on Linux. Thx! ---- David G. Bucci When Dr. Bruce Banner becomes angry, he changes into the Incredible Hulk; when the Incredible Hulk becomes angry, he changes into Chuck Norris. -- ChuckNorrisFacts.com

2 1

Cross-compiling stunnel woes feedback
by Martin van den Nieuwelaar 30 Aug '10

30 Aug '10

Hi everyone (again). I thought I'd post some feedback regarding cross-compiling stunnel, which I have successfully done for an Arm based embedded system we use. I had to edit the 'configure' script in order to remove three sections of code that just check for the cross compiling option, and if set simply exit (message 'cannot check for file existence when cross compiling'). This behaviour really isn't condusive to successful cross compiling. :-) So as I say I removed these sections of code. Next, I configured with './configure --host=arm-linux', then 'make' and the rest are standard as usual. Perhaps the configure script for future releases could be a little more friendly for those cross compiling? Editing the configure file shouldn't be necessary. -- R A Ward Ltd. | We take the privacy of our customers seriously. Christchurch | All sensitive E-Mail attachments MUST be encrypted. New Zealand

2 2

"stunnel -version"
by Felix E. Klee 30 Aug '10

30 Aug '10

I installed the official stunnel 4.33 binary on Windows XP/32. And, when I execute "stunnel -version", a popup window appears with the following message: --------------------------- stunnel 4.33 on Win32 (not configured) --------------------------- Stunnel server is down due to an error. You need to exit and correct the problem. Click OK to see the error log window. --------------------------- OK --------------------------- Shouldn't that just work? What may be the cause for the problem? Indeed, I didn't configure stunnel yet. But I also realized that when I change something - for example the log level - in "stunnel.conf", then this is ignored by "stunnel -version". After clicking "OK" to close the popup message, I get some more info, though meaningless to me: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 1.0.0 29 Mar 2010 Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 Global options debug = notice RNDbytes = 64 RNDoverwrite = yes service = stunnel taskbar = yes Service-level options cert = stunnel.pem ciphers = ALL:!aNULL:!eNULL:!SSLv2 session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none Server is down

2 4

Updated stunnel version in Debian experimental
by Rodrigo Gallardo 28 Aug '10

28 Aug '10

I have just uploaded stunnel 4.33 to Debian experimental. amd64 packages will be available for download as soon as the automated processing is done (6-12 hours). Other architectures will follow as the autobuilders get time in their queues for us. Aside from the updates in stunnel itself, the packaging has been updated somewhat. In particular, the start/stop scripts in /etc/init.d have grown shinny new options to take advantage of configuration file reloading and the log rotation config takes advantage of them to avoid the long standing issue of having to either live with ever-growing logs, or killing long lived connections when rotating. I would be very glad if you would test those new scripts and report any and all bugs. To Debian's BTS, of course, as none of them are at all the fault of our most excellent upstream ;) As much as I'd have liked to upload it to unstable, the distribution is now in freeze in preparation for the upcoming release, and thus uploading a completely new version of stunnel, together with the packaging changes I made would be completely unacceptable. I will upload this version, together with any bug fixes we collect, as soon as the release is over and sid is unfrozen again. Sadly, that means that the next Debian stable will release with 4.29. For that I am sorry, and I promise to make a backport of 4.33 available as soon as possible after the release. -- Rodrigo yes-I-have-been-remise-as-maintainer Gallardo

1 0

Is it possible for stunnel to reject client connections if the server end cannot connect?
by Martin van den Nieuwelaar 27 Aug '10

27 Aug '10

Hi all. I took a look (manually) through the last year of archives, but didn't find anything on this issue. The situation is as follows. Say we have two machines set up, ClientPC and ServerPC. On ClientPC I run stunnel accepting a connection on a local port and connecting to an stunnel port on ServerPC. On ServerPC I run stunnel accepting a connection on the local stunnel port and connecting to the 'encryption unaware' server on another port on the same ServerPC machine. OK, pretty simple stuff so far. The problem is, when I connect to ClientPC with the 'encryption unaware' client app. then I always get a successful connection, even if there is no server running on ServerPC. Of course once the client has a successful connection, it then performs a write(), and that fails with 'Connection reset by peer'. Really, since there is no server running on ServerPC, I want the connect() to stunnel on ClientPC to fail. Is there a way to do this? The alternative (which is a kludge), is to make the client 'stunnel aware' (yuk!), and to tell it whether it's connecting over stunnel on a per connection basis (yuk!). Then it can know whether it needs to look at the connect() or the write() to know whether the server is not running. Yuk! Or am I overlooking something simple? :-) -- R A Ward Ltd. | We take the privacy of our customers seriously. Christchurch | All sensitive E-Mail attachments MUST be encrypted. New Zealand

1 0

Problem with 2048 bits SSL sertificate with stunnel
by Georgi Georgiev 23 Aug '10

23 Aug '10

Hello to all, We get 2048 bits wildcard certificate for our domain *.domain.com .. And we are using thawte as Certificate Authority . So they send as two certificates .. One for SSL web and one intermediate certificate .. The stunnel configuration is : [https1] cert = /etc/stunnel/domain.crt CAfile = /etc/stunnel/domain.intermediate.crt key = /etc/stunnel/domain.key.nopass verify = 0 accept = x.x.x.x:443 connect = x.x.x.x:81 xforwardedfor=yes even I use verify = 0 some of our clients still complains that on some pages ( like blabla.domain.com ) server wants some of their private certificate to be send to the server !! and it's happens only with Internet Explorer 8.0 without verify and CAfile commands IE 8.0 works fine but Mozilla Firefox claim that can find CA be trusted ! wildcard certificate cannot be reissued with 1024 bits key . So is there some mistake in my configuration ? If not what can I do about it ? Thanks in advance .. P.S.: version of stunnel is 4.20 with XForwardedFor patch ..

2 1

stunnel and loading keys from hw devices
by Victor Wagner 20 Aug '10

20 Aug '10

Hello, all I've tried to use stunnel with keys on the hardware device, supported by OpenSSL engine and encountered some minor problems: 1. Under Unix systems stunnel doesn't provide UI_METHOD for ENGINE_load_private_key. It passes NULL there and engine complains that no user interface provided. On Unix in many cases default UI_METHOD provided by OpenSSL would do So, replacing line 302 in the ctx.c (line number are given for release 4.33) from uim=NULL ; to uim=UI_OpenSSL(); would significanly improve stunnel functionality. 2. OpenSSL UI objects have two methods to pass arbitraty pointers along 1. generic ex_data based macros UI_set_app_data/UI_get_app_data 2. UI-specific UI_add_user_data/UI_get0_user_data Unfortunately app-specific pointer is set inside engine and retrieved inside a callback, which belongs to application. So author of an engine and author of an application should somehow agree on which metod to use. All engines shipped with OpenSSL (ones which do provide load_private_key method) use UI_add_user_data to pass data to the callback. stunnel's pin_cb (for Win32 version of stunnel in the gui.c) uses UI_get_app_data to retrieve ui_data. I wonder what engine was used when this code was developed and debugged. And it does no check if any meaningful pointer is obtained. I suggest to add following code after line 602 in gui.c: /* if set_app_Data haven't-return anything */ if (!ui_data) ui_data=UI_get0_user_data(ui); /* if still no avail */ if (!ui_data) { s_log(LOG_ERR,"Engine haven't passed our callback data to callback. Sorry!"); return 0; } Or instead of complaining we can use some structure, local to function pin_cb as fallback UI_DATA - just as password buffer, and check if ui_data->section is not NULL before reading ui_data->section->key in the pass_proc (line 543 of gui.c) Thus it would work even with really broken engines which do not pass userdata from ENGINE_load_private_key to UI callbacks at all. ----- End forwarded message -----

2 1

stunnel and mod_gnutls
by Yclept Nemo 15 Aug '10

15 Aug '10

I run a mod_gnutls (0.5.5)<->apache (2.2.8) webserver which behaves perfectly normally outside of stunnel: GnuTLSEnable on GnuTLSPriorities SECURE256 GnuTLSExportCertificates on .. When a connection is closed and apache signals the mod_gnutls process to quit, the log records: GnuTLS: Handshake Failed (-8) 'A record packet with illegal version was received.' Invalid method in request NS * HTTP/1.0 ::1 - - [15/Aug/2010:03:31:26 -0400] "NS * HTTP/1.0" 501 512 "-" "Apache/2.2.8 (Ubuntu) ... (internal dummy connection)" This lets me easily identify apache2 process turnovers However, when I connect to this server through stunnel, I receive random dropouts. For example, if I were to upload 200 test files to this server, on average 15 transfers would fail. Stunnel logs (excerpt): 2010.08.15 04:11:25 LOG5[29287:3074030448]: Connection reset: 94 bytes sent to SSL, 523 bytes sent to socket 2010.08.15 04:12:21 LOG5[29287:3074448240]: Connection reset: 94 bytes sent to SSL, 523 bytes sent to socket 2010.08.15 04:12:34 LOG5[29287:3074030448]: Connection reset: 94 bytes sent to SSL, 523 bytes sent to socket And my apache2 logs are flooded with: Invalid method in request \x16\x03\x01 # ... over and over and over ... Invalid method in request \x16\x03\x01 # ... this is a tls hello sequence, as though the webserver were not running mod_gnutls ::1 - - [15/Aug/2010:03:31:26 -0400] "NS * HTTP/1.0" 501 512 "-" "Apache/2.2.8 (Ubuntu) ... (internal dummy connection)" The apache logs show new apache2 processes / new ssl connections being created every 2-5 seconds. A normal connections lasts much longer. stunnel configuration debug=7 foreground=yes client=yes syslog=no pid=/absolute/path/to/stunnel.pid libwrap=no [https] accept=127.0.0.1:11111 connect=my.website.net:myport sslVersion=TLSv1 an excerpt from the stunnel log: 2010.08.15 04:11:25 LOG6[29287:3074030448]: SSL connected: previous session reused 2010.08.15 04:11:25 LOG7[29287:3073960816]: Service https started 2010.08.15 04:11:25 LOG7[29287:3073960816]: FD=19 in non-blocking mode 2010.08.15 04:11:25 LOG5[29287:3073960816]: Service https accepted connection from 127.0.0.1:52674 2010.08.15 04:11:25 LOG7[29287:3073960816]: FD=20 in non-blocking mode 2010.08.15 04:11:25 LOG6[29287:3073960816]: connect_blocking: connecting 44.205.51.83:12389 2010.08.15 04:11:25 LOG7[29287:3073960816]: connect_blocking: s_poll_wait 44.205.51.83:12389: waiting 10 seconds 2010.08.15 04:11:25 LOG5[29287:3073960816]: connect_blocking: connected 44.205.51.83:12389 2010.08.15 04:11:25 LOG5[29287:3073960816]: Service https connected remote server from 192.168.1.8:51590 2010.08.15 04:11:25 LOG7[29287:3073960816]: Remote FD=20 initialized 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL state (connect): before/connect initialization 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL state (connect): SSLv3 write client hello A 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL state (connect): SSLv3 read server hello A 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL state (connect): SSLv3 read finished A 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL state (connect): SSLv3 write change cipher spec A 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL state (connect): SSLv3 write finished A 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL state (connect): SSLv3 flush data 2010.08.15 04:11:25 LOG7[29287:3073960816]: 1 items in the session cache 2010.08.15 04:11:25 LOG7[29287:3073960816]: 42 client connects (SSL_connect()) 2010.08.15 04:11:25 LOG7[29287:3073960816]: 42 client connects that finished 2010.08.15 04:11:25 LOG7[29287:3073960816]: 0 client renegotiations requested 2010.08.15 04:11:25 LOG7[29287:3073960816]: 0 server connects (SSL_accept()) 2010.08.15 04:11:25 LOG7[29287:3073960816]: 0 server connects that finished 2010.08.15 04:11:25 LOG7[29287:3073960816]: 0 server renegotiations requested 2010.08.15 04:11:25 LOG7[29287:3073960816]: 41 session cache hits 2010.08.15 04:11:25 LOG7[29287:3073960816]: 0 external session cache hits 2010.08.15 04:11:25 LOG7[29287:3073960816]: 0 session cache misses 2010.08.15 04:11:25 LOG7[29287:3073960816]: 0 session cache timeouts 2010.08.15 04:11:25 LOG6[29287:3073960816]: SSL connected: previous session reused 2010.08.15 04:11:25 LOG3[29287:3074030448]: SSL socket closed on SSL_read with 7 byte(s) in buffer 2010.08.15 04:11:25 LOG5[29287:3074030448]: Connection reset: 94 bytes sent to SSL, 523 bytes sent to socket 2010.08.15 04:11:25 LOG7[29287:3074030448]: Service https finished (4 left) 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL socket closed on SSL_read 2010.08.15 04:11:25 LOG7[29287:3073960816]: Socket write shutdown 2010.08.15 04:11:25 LOG5[29287:3073960816]: Connection closed: 94 bytes sent to SSL, 523 bytes sent to socket 2010.08.15 04:11:25 LOG7[29287:3073960816]: Service https finished (3 left) 2010.08.15 04:11:26 LOG7[29287:3074448240]: SSL socket closed on SSL_read 2010.08.15 04:11:26 LOG7[29287:3074448240]: Socket write shutdown 2010.08.15 04:11:26 LOG5[29287:3074448240]: Connection closed: 1110 bytes sent to SSL, 77962 bytes sent to socket 2010.08.15 04:11:26 LOG7[29287:3074517872]: SSL socket closed on SSL_read 2010.08.15 04:11:26 LOG7[29287:3074517872]: Socket write shutdown 2010.08.15 04:11:26 LOG7[29287:3074448240]: Service https finished (2 left) 2010.08.15 04:11:26 LOG5[29287:3074517872]: Connection closed: 575 bytes sent to SSL, 4889 bytes sent to socket 2010.08.15 04:11:26 LOG7[29287:3074517872]: Service https finished (1 left) 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL socket closed on SSL_read 2010.08.15 04:11:26 LOG7[29287:3074378608]: Socket write shutdown 2010.08.15 04:11:26 LOG5[29287:3074378608]: Connection closed: 573 bytes sent to SSL, 48787 bytes sent to socket 2010.08.15 04:11:26 LOG7[29287:3074378608]: Service https finished (0 left) 2010.08.15 04:11:26 LOG7[29287:3074520768]: Service https accepted FD=11 from 127.0.0.1:52676 2010.08.15 04:11:26 LOG7[29287:3074378608]: Service https started 2010.08.15 04:11:26 LOG7[29287:3074378608]: FD=11 in non-blocking mode 2010.08.15 04:11:26 LOG5[29287:3074378608]: Service https accepted connection from 127.0.0.1:52676 2010.08.15 04:11:26 LOG7[29287:3074378608]: FD=12 in non-blocking mode 2010.08.15 04:11:26 LOG6[29287:3074378608]: connect_blocking: connecting 44.205.51.83:12389 2010.08.15 04:11:26 LOG7[29287:3074378608]: connect_blocking: s_poll_wait 44.205.51.83:12389: waiting 10 seconds 2010.08.15 04:11:26 LOG5[29287:3074378608]: connect_blocking: connected 44.205.51.83:12389 2010.08.15 04:11:26 LOG5[29287:3074378608]: Service https connected remote server from 192.168.1.8:51592 2010.08.15 04:11:26 LOG7[29287:3074378608]: Remote FD=12 initialized 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL state (connect): before/connect initialization 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL state (connect): SSLv3 write client hello A 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL state (connect): SSLv3 read server hello A 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL state (connect): SSLv3 read finished A 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL state (connect): SSLv3 write change cipher spec A 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL state (connect): SSLv3 write finished A 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL state (connect): SSLv3 flush data My questions are: Why does this happen (why only with stunnel), and how can I prevent/avoid this? Sincerely,

2 2

help - SSL bandwidth overhead with using different ciphers
by Slim Ben Mahmoud 30 Jul '10

30 Jul '10

Dear SSL experts, In order to assess the performances of an adaptive security algorithm using SSL, I need to measure the network overhead induced by the establishment of SSL tunnels. The experiment aims to measure the bandwidth consumptions (or throughputs) when SSL tunnels are established using the different ciphers implemented in Stunnel (AES256-SHA or RC4-SHA for instance). Do you think that I have to expect a different throughput when I use different ciphers for every tunnels or the overhead is the pretty much the same? In fact, the first results show no difference between the throughputs no matter the cipher I use. I know that SSL overhead is traditionally measured in delay or latency because of the handshake phase (the encryption process time is negligible on the new CPUs) but this is not what i want to show. I hope that my request is enough clear, let me know if it is not the case. Best regards. --Slim

2 1

Proxy for content filtering
by Raj 29 Jul '10

29 Jul '10

Hi All I want to build a proxy server, which acts as man in the middle proxy. The main intention of application is to do content filtering, whether it is an http or https request. I want to block some specified URL. Can anybody tell me what is the best approach of doing this Thanks, Raj Rajmohan SK

1 0

Re: [stunnel-users] stunnel-users Digest, Vol 72, Issue 2
by TONY WESTENHOFER 07 Jul '10

07 Jul '10

stunnel-users-request(a)mirt.net wrote: >Send stunnel-users mailing list submissions to > stunnel-users(a)mirt.net > >To subscribe or unsubscribe via the World Wide Web, visit > http://stunnel.mirt.net/mailman/listinfo/stunnel-users >or, via email, send a message with subject or body 'help' to > stunnel-users-request(a)mirt.net > >You can reach the person managing the list at > stunnel-users-owner(a)mirt.net > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of stunnel-users digest..." > > >Today's Topics: > > 1. Re: telnetd and tcp_wrappers (Spence, Thomas Civ 844 CS/SCOX) > 2. change openssl version with configure (Bhavna Jhunjhunwala) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Tue, 6 Jul 2010 08:28:11 -0400 >From: "Spence, Thomas Civ 844 CS/SCOX" <Thomas.Spence(a)pentagon.af.mil> >Subject: Re: [stunnel-users] telnetd and tcp_wrappers >To: "stunnel-users(a)mirt.net" <stunnel-users(a)mirt.net> >Message-ID: > <751B1F405F4AFF4D907BD567538A83FB04FFE0B6DA(a)tequilasunrise.pentagon.ncr.ds.af.mil> > >Content-Type: text/plain; charset="us-ascii" > >2 guys did help me and still no luck... > >Anyone who tried this: > >[tssl] >accept = 992 >exec = /usr/sbin/telnetd > >Let me know... Reason why I am asking you because when I log off the server then stunnel's process stopped running but I want it keep running after logoff. Before I changed 'exec = /usr/sbin/telnetd', it was 'connect = 23' and the stunnel's process ran great and never stop running... Strange. > >I really need your help. Thanks. > >--------------- >Tom Spence >ABIDES SYSTEM SUPPORT >844th CS/SCOX > > > >------------------------------ > >Message: 2 >Date: Tue, 6 Jul 2010 17:41:42 -0400 >From: Bhavna Jhunjhunwala <bhavnaj(a)quantitativebrokers.com> >Subject: [stunnel-users] change openssl version with configure >To: stunnel-users(a)mirt.net >Message-ID: > <AANLkTikGWuO2XbF8-rtOTMyfeHVdeUV8TZGJvmYfKekB(a)mail.gmail.com> >Content-Type: text/plain; charset="iso-8859-1" > >Hi, > >I have stunnel version as below installed on Mac: > >s*tunnel 4.33 on i386-apple-darwin10.2.0 with OpenSSL 0.9.8k 25 Mar 2009* >*Threading:PTHREAD SSL:ENGINE Sockets:SELECT,IPv6 Auth:LIBWRAP* >* * >*Global options* >*debug = daemon.notice* >*pid = /usr/local/var/run/stunnel/stunnel.pid* >*RNDbytes = 64* >*RNDfile = /dev/urandom* >*RNDoverwrite = yes* >* * >*Service-level options* >*cert = /usr/local/etc/stunnel/stunnel.pem* >*ciphers = ALL:!aNULL:!eNULL:!SSLv2* >*session = 300 seconds* >*stack = 65536 bytes* >*sslVersion = SSLv3 for client, all for server* >*TIMEOUTbusy = 300 seconds* >*TIMEOUTclose = 60 seconds* >*TIMEOUTconnect = 10 seconds* >*TIMEOUTidle = 43200 seconds* >*verify = none* > >I would like to upgrade the openssl version to 1.0.0a, so I do >./configure --with-ssl=dir >make >make install > >After make install i get below error: > >*make install* >*Making install in src* >*test -z "/usr/local/bin" || ../auto/install-sh -c -d "/usr/local/bin"* >* /bin/sh ../libtool --mode=install /usr/bin/install -c 'stunnel' >'/usr/local/bin/stunnel'* >*/usr/bin/install -c stunnel /usr/local/bin/stunnel* >*test -z "/usr/local/bin" || ../auto/install-sh -c -d "/usr/local/bin"* >* /usr/bin/install -c 'stunnel3' '/usr/local/bin/stunnel3'* >*test -z "/usr/local/lib/stunnel" || ../auto/install-sh -c -d >"/usr/local/lib/stunnel"* >* /bin/sh ../libtool --mode=install /usr/bin/install -c 'libstunnel.la' >'/usr/local/lib/stunnel/libstunnel.la'* >*/usr/bin/install -c .libs/libstunnel.dylib >/usr/local/lib/stunnel/libstunnel.dylib* >*/usr/bin/install -c .libs/libstunnel.lai /usr/local/lib/stunnel/ >libstunnel.la* >*----------------------------------------------------------------------* >*Libraries have been installed in:* >* /usr/local/lib/stunnel* >* >* >*If you ever happen to want to link against installed libraries* >*in a given directory, LIBDIR, you must either use libtool, and* >*specify the full pathname of the library, or use the `-LLIBDIR'* >*flag during linking and do at least one of the following:* >* - add LIBDIR to the `DYLD_LIBRARY_PATH' environment variable* >* during execution* >* >* >*See any operating system documentation about shared libraries for* >*more information, such as the ld(1) and ld.so(8) manual pages.* >*----------------------------------------------------------------------* >*make[2]: Nothing to be done for `install-data-am'.* >*Making install in doc* >*make[2]: Nothing to be done for `install-exec-am'.* >*test -z "/usr/local/share/doc/stunnel" || ../auto/install-sh -c -d >"/usr/local/share/doc/stunnel"* >* /usr/bin/install -c -m 644 'stunnel.html' >'/usr/local/share/doc/stunnel/stunnel.html'* >* /usr/bin/install -c -m 644 'stunnel.pl.html' >'/usr/local/share/doc/stunnel/stunnel.pl.html'* >* /usr/bin/install -c -m 644 'stunnel.fr.html' >'/usr/local/share/doc/stunnel/stunnel.fr.html'* >*test -z "/usr/local/share/man/man8" || ../auto/install-sh -c -d >"/usr/local/share/man/man8"* >*mkdir: /usr/local/share/man/man8: Permission denied* >*make[2]: *** [install-man8] Error 1* >*make[1]: *** [install-am] Error 2* > > > >and when I check the stunnel version it still uses the old ssl version. >Am I doing something wrong here? > >-- >Thanks, >Bhavna >Quantitative Brokers >646 293 1808 > > >DISCLAIMER: >This e-mail and any attachments are for the confidential use of the >intended recipient. If you are not the intended recipient of this >message you are hereby notified that any review, dissemination, >distribution or copying of this message is strictly prohibited. This >communication is for information purposes only and should not be >regarded as an offer to sell or as a solicitation of an offer to buy >any investment product, an official confirmation of any transaction >or an official statement of Quantitative Brokers, LLC. > >E-mail transmissions cannot be guaranteed to be secure or error-free. >Therefore, we do not represent that this information is complete or >accurate and it should not be relied upon as such. > >All information is subject to change without notice. >Quantitative Brokers may, at its discretion, monitor and review the >content of all e-mail communications. >

1 0

problem with "verify=0"
by wujot＠home.pl 07 Jul '10

07 Jul '10

Hello everybody, The basic SSL negotiation requires the exchange of nine SSL messages. If client authentication is required, server can send additional message "certificate request". But this message is optional. I'm using stunnel ver. 4.27 for Win and 4.28 for Linux. In both cases stunnel, working as server, is sending "certificate request" message to the client, regardless of "verify" state, even with "verify=0". When "verify=0", server doesn't care about client's certificate. So, what for server sends this message? The part of my configuration and log is bellow: [test] accept = 60000 connect = 192.168.3.15:4679 client = no ;verify = 0 verify = none ciphers=DES-CBC3-SHA session = 3600 2010.07.07 12:53:35 LOG7[2412:4280]: SSL state (accept): before/accept initialization 2010.07.07 12:53:35 LOG7[2412:4280]: SSL state (accept): SSLv3 read client hello A 2010.07.07 12:53:35 LOG7[2412:4280]: SSL state (accept): SSLv3 write server hello A 2010.07.07 12:53:35 LOG7[2412:4280]: SSL state (accept): SSLv3 write certificate A 2010.07.07 12:53:35 LOG7[2412:4280]: SSL state (accept): SSLv3 write certificate request A <-------------???!!! 2010.07.07 12:53:35 LOG7[2412:4280]: SSL state (accept): SSLv3 flush data 2010.07.07 12:53:42 LOG6[2412:4280]: VERIFY IGNORE: depth=1, /C= .............. 2010.07.07 12:53:42 LOG5[2412:4280]: CRL: verification passed 2010.07.07 12:53:42 LOG5[2412:4280]: VERIFY OK: depth=1, /C= .......... 2010.07.07 12:53:42 LOG6[2412:4280]: VERIFY IGNORE: depth=0, /C= ................ 2010.07.07 12:53:42 LOG5[2412:4280]: CRL: verification passed 2010.07.07 12:53:42 LOG5[2412:4280]: VERIFY OK: depth=0, /C= .......................... 2010.07.07 12:53:42 LOG7[2412:4280]: SSL state (accept): SSLv3 read client certificate A 2010.07.07 12:53:42 LOG7[2412:4280]: SSL state (accept): SSLv3 read client key exchange a 2010.07.07 12:53:42 LOG7[2412:4280]: SSL state (accept): SSLv3 read certificate verify A 2010.07.07 12:53:42 LOG7[2412:4280]: SSL state (accept): SSLv3 read finished A 2010.07.07 12:53:42 LOG7[2412:4280]: SSL state (accept): SSLv3 write change cipher spec A 2010.07.07 12:53:42 LOG7[2412:4280]: SSL state (accept): SSLv3 write finished A So, my question is: how to remove "certificate request" message from stunnel-as-server negotiation? Regards, Wojtek

1 0

change openssl version with configure
by Bhavna Jhunjhunwala 06 Jul '10

06 Jul '10

Hi, I have stunnel version as below installed on Mac: s*tunnel 4.33 on i386-apple-darwin10.2.0 with OpenSSL 0.9.8k 25 Mar 2009* *Threading:PTHREAD SSL:ENGINE Sockets:SELECT,IPv6 Auth:LIBWRAP* * * *Global options* *debug = daemon.notice* *pid = /usr/local/var/run/stunnel/stunnel.pid* *RNDbytes = 64* *RNDfile = /dev/urandom* *RNDoverwrite = yes* * * *Service-level options* *cert = /usr/local/etc/stunnel/stunnel.pem* *ciphers = ALL:!aNULL:!eNULL:!SSLv2* *session = 300 seconds* *stack = 65536 bytes* *sslVersion = SSLv3 for client, all for server* *TIMEOUTbusy = 300 seconds* *TIMEOUTclose = 60 seconds* *TIMEOUTconnect = 10 seconds* *TIMEOUTidle = 43200 seconds* *verify = none* I would like to upgrade the openssl version to 1.0.0a, so I do ./configure --with-ssl=dir make make install After make install i get below error: *make install* *Making install in src* *test -z "/usr/local/bin" || ../auto/install-sh -c -d "/usr/local/bin"* * /bin/sh ../libtool --mode=install /usr/bin/install -c 'stunnel' '/usr/local/bin/stunnel'* */usr/bin/install -c stunnel /usr/local/bin/stunnel* *test -z "/usr/local/bin" || ../auto/install-sh -c -d "/usr/local/bin"* * /usr/bin/install -c 'stunnel3' '/usr/local/bin/stunnel3'* *test -z "/usr/local/lib/stunnel" || ../auto/install-sh -c -d "/usr/local/lib/stunnel"* * /bin/sh ../libtool --mode=install /usr/bin/install -c 'libstunnel.la' '/usr/local/lib/stunnel/libstunnel.la'* */usr/bin/install -c .libs/libstunnel.dylib /usr/local/lib/stunnel/libstunnel.dylib* */usr/bin/install -c .libs/libstunnel.lai /usr/local/lib/stunnel/ libstunnel.la* *----------------------------------------------------------------------* *Libraries have been installed in:* * /usr/local/lib/stunnel* * * *If you ever happen to want to link against installed libraries* *in a given directory, LIBDIR, you must either use libtool, and* *specify the full pathname of the library, or use the `-LLIBDIR'* *flag during linking and do at least one of the following:* * - add LIBDIR to the `DYLD_LIBRARY_PATH' environment variable* * during execution* * * *See any operating system documentation about shared libraries for* *more information, such as the ld(1) and ld.so(8) manual pages.* *----------------------------------------------------------------------* *make[2]: Nothing to be done for `install-data-am'.* *Making install in doc* *make[2]: Nothing to be done for `install-exec-am'.* *test -z "/usr/local/share/doc/stunnel" || ../auto/install-sh -c -d "/usr/local/share/doc/stunnel"* * /usr/bin/install -c -m 644 'stunnel.html' '/usr/local/share/doc/stunnel/stunnel.html'* * /usr/bin/install -c -m 644 'stunnel.pl.html' '/usr/local/share/doc/stunnel/stunnel.pl.html'* * /usr/bin/install -c -m 644 'stunnel.fr.html' '/usr/local/share/doc/stunnel/stunnel.fr.html'* *test -z "/usr/local/share/man/man8" || ../auto/install-sh -c -d "/usr/local/share/man/man8"* *mkdir: /usr/local/share/man/man8: Permission denied* *make[2]: *** [install-man8] Error 1* *make[1]: *** [install-am] Error 2* and when I check the stunnel version it still uses the old ssl version. Am I doing something wrong here? -- Thanks, Bhavna Quantitative Brokers 646 293 1808 DISCLAIMER: This e-mail and any attachments are for the confidential use of the intended recipient. If you are not the intended recipient of this message you are hereby notified that any review, dissemination, distribution or copying of this message is strictly prohibited. This communication is for information purposes only and should not be regarded as an offer to sell or as a solicitation of an offer to buy any investment product, an official confirmation of any transaction or an official statement of Quantitative Brokers, LLC. E-mail transmissions cannot be guaranteed to be secure or error-free. Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such. All information is subject to change without notice. Quantitative Brokers may, at its discretion, monitor and review the content of all e-mail communications.

1 0

Re: [stunnel-users] telnetd and tcp_wrappers
by Spence, Thomas Civ 844 CS/SCOX 06 Jul '10

06 Jul '10

2 guys did help me and still no luck... Anyone who tried this: [tssl] accept = 992 exec = /usr/sbin/telnetd Let me know... Reason why I am asking you because when I log off the server then stunnel's process stopped running but I want it keep running after logoff. Before I changed 'exec = /usr/sbin/telnetd', it was 'connect = 23' and the stunnel's process ran great and never stop running... Strange. I really need your help. Thanks. --------------- Tom Spence ABIDES SYSTEM SUPPORT 844th CS/SCOX

1 0