stunnel-users

3 participants
3308 discussions

Stunnel process die-off halfway
by PinLee_Su＠azuretech.com.sg 25 Oct '04

25 Oct '04

I have downloaded and installed the stunnel-4.05.exe together with the libssl32.dll and libeay32.dll from stunnel.org. I am able to start the stunnel without problem. however after the a while the process die-off automatically. check the event log in the windows (using Windows XP), it gives error msg as "Faulting application stunnel-4-05.exe, version 0.0.0.0, faulting module libssl32.dll, version 0.0.0.0, fault address 0x00006cd8." I would appreciate if anyone can help me on this? many thanks in advance! "Azure Technologies is the IT solutions provider of Hutchison Whampoa Limited and a member of Hutchison Global Communications Holdings Limited." The message is for information purposes only and is not intended to create legally binding relations. The shareholders, directors and management of Azure Technologies and any of its group companies accept no responsibility and accordingly shall have no liability to any party whatsoever with respect to the contents of this message. This message (including any attachments) is intended only for the use of the addressee(s) named above. It may contain information that is PRIVILEGED and CONFIDENTIAL and should not be read, copied or otherwise used by any other person. If you are not the intended recipient, please erase all copies of the message (including attachments) and notify us immediately.

1 0

Compiling v4.05 from source
by Ed Vazquez 23 Oct '04

23 Oct '04

On an up-to-date version of Linux, I get this error following a successful config: $ make Making all in src make[1]: Entering directory `/g/vs-build/stunnel-4.05/src' Makefile:404: warning: overriding commands for target `stunnel.exe' Makefile:265: warning: ignoring old commands for target `stunnel.exe' cd .. && automake --gnu --include-deps src/Makefile configure.ac:5: your implementation of AM_INIT_AUTOMAKE comes from an configure.ac:5: old Automake version. You should recreate aclocal.m4 configure.ac:5: with aclocal and run automake again. src/Makefile.am: required file `auto/depcomp' not found /usr/share/automake-1.9/am/depend2.am: am__fastdepCC does not appear in AM_CONDITIONAL /usr/share/automake-1.9/am/depend2.am: AMDEP does not appear in AM_CONDITIONAL make[1]: *** [Makefile.in] Error 63 make[1]: Leaving directory `/g/vs-build/stunnel-4.05/src' make: *** [all-recursive] Error 1 After running aclocal (completes with no errors), I re-run configure and try to make again: $ make Making all in src make[1]: Entering directory `/g/vs-build/stunnel-4.05/src' Makefile:404: warning: overriding commands for target `stunnel' Makefile:265: warning: ignoring old commands for target `stunnel' cd .. && automake-1.9 --gnu --include-deps src/Makefile src/Makefile.am: required file `auto/depcomp' not found make[1]: *** [Makefile.in] Error 1 make[1]: Leaving directory `/g/vs-build/stunnel-4.05/src' make: *** [all-recursive] Error 1 Ideas? Suggestions? Did I screw something up? Ed Vazquez To speak ill of others is a dishonest way of praising ourselves. . . let us be above such transparent egotism. - Will Durant

2 1

stunnel with SHOUTcast
by grimholtz＠mailbolt.com 20 Oct '04

20 Oct '04

Anyone gotten stunel to work with SHOUTcast or another streaming audio server? Regards, Eric Jung

3 2

stunnel with netcat.
by Graeme Stewart 19 Oct '04

19 Oct '04

I'm hoping someone on this list will take the time to help me. I apologize for the newbie nature of this question. I'm trying to create an SSL stunnel connection to an https URL then utilize netcat to send requests through that previously established link. I believe this should be possible. My configuration file includes: verify=0 client=yes [https] accept=localhost:8080 connect=www.remotesite.com:443 TIMEOUTEclose=0 transparent=yes Whenever I run: # stunnel stunnel.config # nc -vv localhost 8080 I receive a connection refused error from netcat. Could someone point me in the right direction? I did review the examples on stunnel.org but they all seem to reference an earlier version of stunnel. Thanks, Graeme

2 5

any way to search the archives?
by grimholtz＠mailbolt.com 19 Oct '04

19 Oct '04

Hi, Is there any way to search the archives at http://mirt.net/pipermail/stunnel-users/ or do I just have to go through them manually? Thank you for any reply, Eric Jung

2 1

Stunnel and streaming audio
by grimholtz＠mailbolt.com 18 Oct '04

18 Oct '04

Hi, I'm using stunnel 4.05 on Windows 2000 for both client and server. I have VNC working just fine over port 443. Now I want to stream audio from the server to the client over port 21 with stunnel and any streaming audio server. I can't get this to work. I'm currently using Windows Media Encoder for streaming because it is simple and free, but I don't mind switching to SHOUTcast or something else. This is the stunnel server configuration: CAfile = CAcert.pem CApath = certificates cert = server.pem client = no verify = 3 [vnc] accept = 443 connect = 127.0.0.1:15351 [audiostream] accept = 21 connect = 127.0.0.1:80 On the client-side, I have this configuration: CAfile = CAcert.pem CApath = certificates cert = client.pem client = yes verify = 3 [vnc] accept = 127.0.0.1:15351 connect = someurl.com:443 [audiostream] accept = 127.0.0.1:80 connect = someurl.com:21 VNC works fine but streaming audio does not. It doesn't matter if I change port 21 to something else; I get the same error. The output on the server-side stunnel console is: 2004.10.18 13:16:02 LOG5[2036:1732]: audiostream connected from xxx.xxx.xxx.xxx:59090 The output on the client-side stunnel console is: 2004.10.18 13:21:07 LOG5[1088:1300]: audiostream connected from 127.0.0.1:1467 2004.10.18 13:21:07 LOG3[1088:1300]: SSL_connect: Peer suddenly disconnected stunnel -version on the server-side displays this info: stunnel 4.05 on x86-pc-mingw32-gnu WIN32 with OpenSSL 0.9.7d 17 Mar 2004 Global options cert = stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH debug = 5 key = stunnel.pem RNDbytes = 64 RNDoverwrite = yes service = stunnel session = 300 seconds taskbar = yes verify = none Service-level options TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTidle = 43200 seconds 2004.10.18 20:47:05 LOG3[1316:2092]: Server is down openssl version on the server-side displays this info: OpenSSL 0.9.7d 17 Mar 2004 Anyone have ideas? Thank you in advance for any advice, Eric Jung

1 0

Client certificates still valid after removal with verify = 3
by Michael Brown 18 Oct '04

18 Oct '04

I'm having a problem with my stunnel 4.05 setup: We are using a setup where each client that connects has to have a valid certificate present on the filesystem (verify = 3). After the client connects once, it seems that the certificate is cached by either the SSL libraries or stunnel: stunnel.conf: <<< cert = /etc/stunnel/servercert.pem CAfile = /usr/share/ssl/CA/cacert.pem CApath = /etc/stunnel/clientdb verify = 3 [https] accept = 443 connect = remote.server.name:443 local = 192.168.0.6 >>> Some output: Oct 15 19:36:34 machine stunnel[14139]: VERIFY OK: depth=1, /C=CA/ST=Ontario/L=Here/O=Us/OU=Bigwigs/CN=CA Cert/emailAddress=certainly(a)here.com Oct 15 19:36:34 fruitfly stunnel[14139]: VERIFY OK: depth=0, /C=CA/ST=Ontario/O=Us/OU=slackers anonymous/CN=Daniel Unceman/emailAddress=dunce(a)here.com ... and the same thing after I remove the hash link in /etc/stunnel/clientdb. But only after I restart does it to the right thing: Oct 15 19:40:24 fruitfly stunnel[15247]: VERIFY OK: depth=1, /C=CA/ST=Ontario/L=Here/O=Us/OU=Bigwigs/CN=CA Cert/emailAddress=certainly(a)here.com Oct 15 19:40:24 fruitfly stunnel[15247]: VERIFY ERROR ONLY MY: no cert for /C=CA/ST=Ontario/O=Us/OU=slackers anonymous/CN=Daniel Unceman/emailAddress=dunce(a)here.com Help! We don't want to have to restart stunnel every time we remove a user. Thanks, Michael Brown -- Michael Brown {0x527670C0} | `One of the main causes of the fall of Systems Administrator | the Roman Empire was that, lacking zero, +1 519 888 7111 x2339 | they had no way to indicate successful michaelb(a)opentext.com | termination of their C programs.' - Firth

2 1

New feature
by Michal Trojnara 18 Oct '04

18 Oct '04

Dear Users, New line in stunnel 4.06 ChangeLog: - Multiple connect=host:port options are allowed in a single service section. Remote hosts are connected using round-robin algorithm. What do you think? Best regards, Mike

7 9

Using stunnel with HTTP as server and client
by Wayne A Collins 14 Oct '04

14 Oct '04

I am new to the product and encryption as well, but am looking for some unix examples using with an HTTP client and a server to communicate with HTTP/S applications. I have looked through the archives, but they only go back 3 months. I know this has had to have been done many times but am missing something. Thanks, Wayne A. Collins IBM Global Services IT Architect, eBI - Communications & Public Sectors wacollin(a)us.ibm.com 941-792-0448 Office 800-759-8888 Pin # 1019403 Pager

3 2

Re: Problem running Stunnel
by Olivier Kaloudoff 12 Oct '04

12 Oct '04

Hi Robert, > When I run stunnel nothing seems to be happening. The terminal > accepts the command but does nothing. The log file doesn't produce any > output either nor does running stunnel in the foreground. (...) > What is meant to happen when I run stunnel, is there a way that I > can test if it is working. I previously tested imapd using telnet 0 143. > I'm using this > http://www.stepwise.com/Articles/Workbench/eart.4.0.html > article but its out of date, uses 3.x command line inputs, so I've tried > to convert those to the config file. put the following in your stunnel.conf to have useful debugging informations for 4.x: # Some debugging stuff debug = 7 output = /tmp/stunnel.log # comment out pid = line, that causes problems. # (to be re-enabled later if you need) # pid = /tmp/stunnel.pid launch your stunnel process with the following: stunnel stunnel.conf and watch your logfile at the same time: tail -f /tmp/stunnel.log Regards, Olivier

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users