stunnel-users

3 participants
3308 discussions

Connection details patch for 4.10
by Oleg Ivanov 13 May '05

13 May '05

Hello. I've modified the old "conndetails_peter" patch by Peter D. Gray to let it work with stunnel 4.10. I've also added to it information about compression (available compression methods and negotiated method). Patch creates a file "conn.LOCAL_HOST:LOCAL_PORT" in a configurable temp directory (config file: "infodir" option). The file is deleted when the client disconnects. Full description of original can be found at: http://www.stunnel.org/patches/desc/conndetails_peter.html Hope it will be useful for someone. Best Regards, Oleg Ivanov. -- Oleg Ivanov mailto: saruman(a)unigsm.com diff -cr ../stunnel-4.10.orig/src/client.c src/client.c *** ../stunnel-4.10.orig/src/client.c 2005-05-13 00:43:24.000000000 -0200 --- src/client.c 2005-05-13 01:34:36.000000000 -0200 *************** *** 94,99 **** --- 94,114 ---- c->opt=opt; c->local_rfd.fd=rfd; c->local_wfd.fd=wfd; + + if(options.info_dir) { + sprintf(c->info_fname, "%s/pid.%d", options.info_dir, getpid()); + c->info_file = fopen(c->info_fname, "w"); + if(!c->info_file) { + s_log(LOG_ERR, "failed to create: %s (continuing)", c->info_fname); + c->info_fname[0] = 0; + } else { + s_log(LOG_DEBUG, "connection detail to be written to: %s", + c->info_fname); + fprintf(c->info_file, "# connection details\n" + "STUNNEL_PID=%d\n", getpid()); + } + } + return c; } *************** *** 203,208 **** --- 218,228 ---- s_log(LOG_NOTICE, "%s connected from %s", c->opt->servname, c->accepting_address); } + if(c->info_file) { + fprintf(c->info_file, "SERVICE=\"%s\"\n", c->opt->servname); + fprintf(c->info_file, "REMOTE_HOST=\"%s\"\nREMOTE_PORT=%d\n", + c->accepting_address, ntohs(c->peer_addr.addr[0].in.sin_port)); + } return 0; /* OK */ } *************** *** 237,242 **** --- 257,289 ---- } #endif s_log(LOG_DEBUG, "Remote FD=%d initialized", fd); + if(c->info_file) { + struct sockaddr_in addr; + int addrlen = sizeof(addr); + if(getsockname(fd, (struct sockaddr *)&addr, &addrlen)) { + // ignore error + } else { + char newname[STRLEN]; + + /* record our end of the tunnel, and change name of file to match */ + enter_critical_section(CRIT_NTOA); /* inet_ntoa is not mt-safe */ + fprintf(c->info_file, "LOCAL_HOST=\"%s\"\nLOCAL_PORT=%d\n", + inet_ntoa(addr.sin_addr), ntohs(addr.sin_port)); + sprintf(newname, "%s/conn.%s:%d", + options.info_dir, + inet_ntoa(addr.sin_addr), ntohs(addr.sin_port)); + leave_critical_section(CRIT_NTOA); + + /* done with file, close it now */ + fprintf(c->info_file, "# EOF\n"); + fclose(c->info_file); + c->info_file = NULL; + + /* rename so it's easy for the client to find */ + rename(c->info_fname, newname); + strcpy(c->info_fname, newname); + } + } c->remote_fd.fd=fd; c->remote_fd.is_socket=1; /* Always! */ if(set_socket_options(fd, 2)<0) *************** *** 674,679 **** --- 721,737 ---- reset(c->local_wfd.fd, "linger (local_wfd)"); } } + /* Cleanup connection info file which isn't useful anymore */ + if(options.info_dir) { + if(c->info_file) { + fclose(c->info_file); + c->info_file = NULL; + } + if(c->info_fname) { + unlink(c->info_fname); /* ignore errors */ + s_log(LOG_INFO, "removed info file: %s", c->info_fname); + } + } } static void print_cipher(CLI *c) { /* print negotiated cipher */ *************** *** 683,689 **** #else SSL_CIPHER *cipher; char buf[STRLEN]; ! int len; cipher=SSL_get_current_cipher(c->ssl); SSL_CIPHER_description(cipher, buf, STRLEN); --- 741,748 ---- #else SSL_CIPHER *cipher; char buf[STRLEN]; ! int len, cnt; ! SSL_COMP *comp=NULL; cipher=SSL_get_current_cipher(c->ssl); SSL_CIPHER_description(cipher, buf, STRLEN); *************** *** 691,696 **** --- 750,809 ---- if(len>0) buf[len-1]='\0'; s_log(LOG_INFO, "Negotiated ciphers: %s", buf); + + if(c->info_file) { + X509 *peer; + + fprintf(c->info_file, "CIPHER_DESC=\"%s\"\n", buf); + fprintf(c->info_file, "CIPHER_ALGO=\"%s\"\n", + SSL_CIPHER_get_name(cipher)); + fprintf(c->info_file, "CIPHER_BITS=%d\n", + SSL_CIPHER_get_bits(cipher, NULL)); + // Show compression info + if (c->ssl->ctx->comp_methods == NULL) { + // No compression methods available + fprintf(c->info_file, "No compression methods available\n"); + } else { + int cntMethods = sk_SSL_COMP_num(c->ssl->ctx->comp_methods); + fprintf(c->info_file, "%d compression method(s) available:\n", cntMethods); + for (cnt=0; cnt<cntMethods; cnt++) { + comp=sk_SSL_COMP_value(c->ssl->ctx->comp_methods, cnt); + fprintf(c->info_file, "%d\t%s ", comp->id, comp->name); + switch (comp->id) { + case 0xe0: + fprintf(c->info_file, "(zlib)\n"); break; + case 0xe1: + fprintf(c->info_file, "(rle)\n"); break; + default: + fprintf(c->info_file, "(unknown)\n"); break; + } + } + } + if (c->ssl->s3->tmp.new_compression == NULL) { + fprintf(c->info_file, "SSL_COMP=NULL\n"); + } else { + fprintf(c->info_file, "SSL_COMP.id=%d ", + c->ssl->s3->tmp.new_compression->id); + switch (comp->id) { + case 0xe0: + fprintf(c->info_file, "(zlib)\n"); break; + case 0xe1: + fprintf(c->info_file, "(rle)\n"); break; + default: + fprintf(c->info_file, "(unknown)\n"); break; + } + } + peer = SSL_get_peer_certificate(c->ssl); + if(peer) { + X509_NAME_oneline(X509_get_subject_name(peer), buf, STRLEN); + fprintf(c->info_file, "SSL_CLIENT_DN=\"%s\"\n", buf); + + X509_NAME_oneline(X509_get_issuer_name(peer), buf, STRLEN); + fprintf(c->info_file, "SSL_CLIENT_I_DN=\"%s\"\n", buf); + + X509_free(peer); + } + } #endif } *************** *** 953,958 **** --- 1066,1075 ---- s_ntop(c->connecting_address, &addr); s_log(LOG_DEBUG, "%s connecting %s", c->opt->servname, c->connecting_address); + if(c->info_file) { + fprintf(c->info_file, "TUNNEL_HOST=\"%s\"\nTUNNEL_PORT=%d\n", + c->connecting_address, ntohs(addr.in.sin_port)); + } if(!connect(s, &addr.sa, addr_len(addr))) return s; /* no error -> success (should not be possible) */ error=get_last_socket_error(); Only in src: client.c.orig Only in src: client.c~ diff -cr ../stunnel-4.10.orig/src/options.c src/options.c *** ../stunnel-4.10.orig/src/options.c 2005-05-13 00:43:24.000000000 -0200 --- src/options.c 2005-05-13 00:44:16.000000000 -0200 *************** *** 664,669 **** --- 664,693 ---- break; } + /* infodir */ + switch(cmd) { + case CMD_INIT: + options.info_dir=NULL; + break; + case CMD_EXEC: + if(strcasecmp(opt, "infodir")) + break; + if(arg[0]) { /* not empty */ + if(strlen(arg) > STRLEN - 20) return "infodir pathname too long"; + options.info_dir=stralloc(arg); + } else { + options.info_dir=NULL; + } + return NULL; /* OK */ + case CMD_DEFAULT: + break; + case CMD_HELP: + log_raw("%-15s = writable directory to store connection info into", + "infodir"); + break; + } + + if(cmd==CMD_EXEC) return option_not_found; return NULL; /* OK */ diff -cr ../stunnel-4.10.orig/src/prototypes.h src/prototypes.h *** ../stunnel-4.10.orig/src/prototypes.h 2005-05-13 00:43:24.000000000 -0200 --- src/prototypes.h 2005-05-13 00:47:03.000000000 -0200 *************** *** 113,118 **** --- 113,119 ---- int verify_level; int verify_use_only_my; long ssl_options; + char *info_dir; /* directory for connection info */ /* some global data for stunnel.c */ #ifndef USE_WIN32 *************** *** 264,269 **** --- 265,272 ---- FD *ssl_rfd, *ssl_wfd; /* Read and write SSL descriptors */ int sock_bytes, ssl_bytes; /* Bytes written to socket and ssl */ s_poll_set fds; /* File descriptors */ + FILE *info_file; /* text file with connection information */ + char info_fname[STRLEN]; /* file name (full path) for info_file */ } CLI; extern int max_clients; *************** *** 305,311 **** /**************************************** Prototypes for sthreads.c */ typedef enum { ! CRIT_KEYGEN, CRIT_INET, CRIT_CLIENTS, CRIT_WIN_LOG, CRIT_SESSION, CRIT_SECTIONS } SECTION_CODE; --- 308,314 ---- /**************************************** Prototypes for sthreads.c */ typedef enum { ! CRIT_KEYGEN, CRIT_INET, CRIT_CLIENTS, CRIT_WIN_LOG, CRIT_SESSION, CRIT_NTOA, CRIT_SECTIONS } SECTION_CODE;

1 0

syslog on Solaris2.9
by Geoff LeBoldus 13 May '05

13 May '05

I can't seem to get stunnel-4.10 to log properly to syslog. Stunnel logs the startup, but doesn't log any individual tunnel information. If I specify its own file and debug = 7, it logs everything as expected. I've tried a number of different configuration combinations without success. Any thoughts? Here's my current config snippets - stunnel.conf debug = local0.debug -syslog.conf local0.debug /var/log/syslog Stunnel startup from /var/log/syslog May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.notice] stunnel 4.10 on sparc-sun-solaris2.9 UCONTEXT+POLL+IPv4 with OpenSSL 0.9.7f 22 Mar 2005 May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.notice] stunnel 4.10 on sparc-sun-solaris2.9 UCONTEXT+POLL+IPv4 with OpenSSL 0.9.7f 22 Mar 2005 May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.debug] Snagged 64 random bytes from /home/geoff/.rnd May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.debug] Wrote 1024 new random bytes to /home/geoff/.rnd May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.debug] RAND_status claims sufficient entropy for the PRNG May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.info] PRNG seeded successfully May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.debug] Certificate: /opt/local/etc/stunnel/stunnel.pem May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.debug] Key file: /opt/local/etc/stunnel/stunnel.pem May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.info] file ulimit = 1024 (can be changed with 'ulimit -n') May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.info] poll() used - no FD_SETSIZE limit for file descriptors May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.notice] 500 clients allowed May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.notice] 500 clients allowed May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.debug] FD 5 in non-blocking mode May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.debug] FD 6 in non-blocking mode May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.debug] FD 7 in non-blocking mode May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.debug] SO_REUSEADDR option set on accept socket May 13 15:31:31 server_name stunnel[4576]: [ID 702911 local0.debug] ldaps bound to 0.0.0.0:1212 May 13 15:31:31 server_name stunnel[4577]: [ID 702911 local0.debug] Created pid file /stunnel.pid May 13 15:31:31 server_name stunnel[4577]: [ID 702911 local0.debug] Waiting -1 second(s) for 2 file descriptor(s) -- Geoff LeBoldus Systems Programmer Information Technology Services

1 0

Session Reuse Information for Stunnel
by vasudha.upadhyaya＠convergys.com 11 May '05

11 May '05

I know that Stunnel reuses sessions. Can anyone tell me the default time that stunnel reuses the old session. And to set a value for session timeout do I use the option: session = timeout session cache timeout Thanks, Vasudha. -------------------------------------------- Vasudha Upadhyaya Convergys Speech Solutions Ph:703-885-5837 vasudha.upadhyaya(a)convergys.com -- "NOTICE: The information contained in this electronic mail transmission is intended by Convergys Corporation for the use of the named individual or entity to which it is directed and may contain information that is privileged or otherwise confidential. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email or by telephone (collect), so that the sender's address records can be corrected."

2 1

zlib compression
by Oleg Ivanov 09 May '05

09 May '05

Hello. I have installed stunnel 4.09 both as client (on my computer) and as server (on server). Both has zlib compression enabled and I can see that zlib initializes properly in the logs (it says "Compression enabled using zlib method"). But when I send any data over that tunnel I can't see any signs of compression - amount of traffic is almost the same as over plain connection. Am I doing something wrong? Or I'm misunderstanding the purpose of this compression ability? And if the traffic indeed must be reduced - why I can't see that and how can I make it work properly? Thank you for your answers. Best Regards, Oleg Ivanov. -- Oleg Ivanov mailto: saruman(a)unigsm.com

2 2

connect ip = accept ip on multihomed server ?
by Dennis Spreen 09 May '05

09 May '05

hi all, with a configuration (stunnel4.10) like this [conc1] accept = 100 connect = 99 stunnel accepts all requests on all ips on port 100 but connects with the localhost to port 99. is it possible to configure stunnel that if it accepts a connection on 1.2.3.4:100 it connects to 1.2.3.4:99 ? I know it is possible to use accept = 1.2.3.4:100 connect = 1.2.3.4:99 .... accept = 1.2.3.250:100 connect = 1.2.3.250:99 but i'm on a c-class and that would require about 250 entries in the config file. Is there a better way to do this? regards dennis

1 0

Problems in Stunnel4.10
by vasudha.upadhyaya＠convergys.com 06 May '05

06 May '05

Hi, We have been using stunnel 4.05 and recently downloded the stunnel 4.10 and deployed in our environmrnt. All the traffice is going via the Load Balancer Cisco CSS with SSL Module to the unix server(with stunnel4.10 on them). We also 4.10 deployed on the Windows2000 as a client. The CSS sends keep Alives to check the health of the servers(whether they are up or not).And I guess due to this the stunnel on unix servers crashes immediately and there is a access violation error. Attached is the truss output for one of the unix servers.Stunnel4.10 was compiled using OpenSSL0.97d and OpenSSL0.97g, and still we get the same problem.Attached is the stunnel.conf also.[attachment "stunnel.conf" deleted by Vasudha Upadhyaya/CCMG/CVG] (See attached file: truss.out) (See attached file: stunnel.conf) Thanks, Vasudha. -------------------------------------------- Vasudha Upadhyaya Convergys Speech Solutions Ph:703-885-5837 vasudha.upadhyaya(a)convergys.com -- "NOTICE: The information contained in this electronic mail transmission is intended by Convergys Corporation for the use of the named individual or entity to which it is directed and may contain information that is privileged or otherwise confidential. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email or by telephone (collect), so that the sender's address records can be corrected."

1 0

qmail+tcpserver+stunnel-4.x
by Scott Geiger 06 May '05

06 May '05

Does anyone have a good link to setting up qmail to use stunnel for pop3s? I have found a few, but so far nothing seems to work from me. When I test with telnet it closes the connection immediately and tcpserver exits with status 11. tcpserver: status: 0/20 tcpserver: status: 1/20 tcpserver: pid 32660 from 128.226.61.66 tcpserver: ok 32660 242.70-84-9.reverse.theplanet.com:70.84.9.242:995 :128.226.61.66::26733 2005.05.06 15:37:18 LOG5[32660:1]: stunnel 4.10 on i686-pc-linux-gnu UCONTEXT+POLL+IPv4+LIBWRAP with OpenSSL 0.9.7g 11 Apr 2005 2005.05.06 15:37:18 LOG7[32660:1]: Snagged 64 random bytes from /root/.rnd 2005.05.06 15:37:18 LOG7[32660:1]: Wrote 1024 new random bytes to /root/.rnd 2005.05.06 15:37:18 LOG7[32660:1]: RAND_status claims sufficient entropy for the PRNG 2005.05.06 15:37:18 LOG6[32660:1]: PRNG seeded successfully 2005.05.06 15:37:18 LOG7[32660:1]: Configuration SSL options: 0x01000000 2005.05.06 15:37:18 LOG7[32660:1]: SSL options set: 0x01000000 2005.05.06 15:37:18 LOG7[32660:1]: Certificate: /etc/stunnel/stunnel.pem 2005.05.06 15:37:18 LOG7[32660:1]: Key file: /etc/stunnel/stunnel.pem 2005.05.06 15:37:18 LOG7[32660:1]: stunnel started 2005.05.06 15:37:18 LOG7[32660:1]: FD 0 in non-blocking mode 2005.05.06 15:37:18 LOG7[32660:1]: FD 1 in non-blocking mode 2005.05.06 15:37:18 LOG6[32660:1]: Local mode child started (PID=32661) 2005.05.06 15:37:18 LOG5[32660:1]: stunnel connected from 127.0.0.1:41860 2005.05.06 15:37:18 LOG7[32660:1]: FD 3 in non-blocking mode 2005.05.06 15:37:18 LOG7[32660:1]: stunnel connecting 127.0.0.1:110 2005.05.06 15:37:18 LOG7[32660:1]: connect_wait: waiting 10 seconds 2005.05.06 15:37:18 LOG7[32660:0]: Waiting 10 second(s) for 1 file descriptor(s) tcpserver: end 32660 status 11 tcpserver: status: 0/20 If is use openssl's s_client (openssl s_client -connect mail.bcmediagroup.com:995 -state) I get: CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:SSLv2/v3 write client hello A SSL_connect:error in SSLv2/v3 read server hello A write:errno=104 Scott Geiger

1 0

Newbie windows user needs help patching/compiling with mingw
by Geoff Elmer 04 May '05

04 May '05

Can anyone point me to some documentation on how to use mingw to patch and make stunnel? Specifically, I want to apply connect-proxy_dunbar.patch to v4.05 source and compile it. As I am not really a coder (yet) and am not yet very *nix knowledgeable, any help would be much appreciated. Situation is: I am trying to traverse a MS ISA server (running as a proxy) and the v4.10 stunnel doesn't allow me to specify a proxy to route thru. Thanks in advance, Geoff __________________________________ Do you Yahoo!? Yahoo! Mail - Find what you need with new enhanced search. http://info.mail.yahoo.com/mail_250

1 0

[Newbie] Set up question
by Geoff Sheridan 02 May '05

02 May '05

I have compiled and installed stunnel 4.10 under Mac OS X 10.3. I want to set up stunnel to connect a non-ssl newsreader client to an ssl nntp server. The newsreader client is Unison and the server is Easynews SSL server. I don't really know how to do this. I wonder if anyone can point me in the right direction. Thanks Geoff ___________ PS I did various searches of the list archive and read TFM, but still need guidance! I am asked to include some details: $ /usr/local/sbin/stunnel -version stunnel 4.10 on powerpc-apple-darwin7.7.0 PTHREAD+POLL+IPv4+LIBWRAP with OpenSSL 0.9.7b 10 Apr 2003 Global options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH debug = 5 key = /usr/local/etc/stunnel/stunnel.pem pid = /usr/local/var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes session = 300 seconds verify = none Service-level options TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds $ uname -a Darwin My-Computer.local 7.7.0 Darwin Kernel Version 7.7.0: Sun Nov 7 16:06:51 PST 2004; root:xnu/xnu-517.9.5.obj~1/RELEASE_PPC Power Macintosh powerpc $ gcc -v Reading specs from /usr/libexec/gcc/darwin/ppc/3.3/specs Thread model: posix gcc version 3.3 20030304 (Apple Computer, Inc. build 1640)

2 1

[Newbie] Set up question
by retrocool 30 Apr '05

30 Apr '05

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users