stunnel-users

3311 discussions

Cannot install stunnel as a service on Vista
by Neil Aggarwal 12 Apr '07

12 Apr '07

Hello: I cannot install stunnel as a service on Vista. I get a permission denied error. Is there a way to work around it? Thanks, Neil -- Neil Aggarwal, (214)986-3533, www.JAMMConsulting.com FREE! Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com for details.

2 1

forcing checking of local certificates every time
by san san 11 Apr '07

11 Apr '07

Hi, I am using stunnel with verify option with value 3. In value 3 the authentication is carried out using the local trusted certificates. I think stunnel does not check the local trusted certificates directory each and every time. If the connection has already been established then it does not check local trusted certificates , connection can be established using the certificates in cache. Is it possible to force to check the local trusted certificates every time. Regards

2 1

stunnel work with NAT
by atsushi kataoka 11 Apr '07

11 Apr '07

I have one question , does stunnel work with NAT ? I will explain the architecture There are some 10.0.0.XXXX machines and some are 192.0.0.XXXX machines. They are connected to each other via Router which does NAT. My VNC servers are installed on 10.0.0.XXXX and vnc clients on 192.0.0.XXXX I am not able to do the vnc from client to server. Now I want to encrypt the VNC traffic , can stunnel work with NAT? A Kataoka

1 0

running concurrent stunnel instances
by John Taylor 10 Apr '07

10 Apr '07

Greetings, I am running rsync through stunnel 4.20. Each end is a Dell dual cpu, dual core Xeon (each core with hyper-threading) 8 gigs of memory, running Win 2003 Server. The disks are 10K RPM Ultra-320 drives that use hardware raid-5. Right now, I have anywhere between 5 and 8 Scheduled Tasks running at the same time. The reason for this is that the backups need to run in parallel in order to finish within the 15 hour time window. Although I am not certain about an exact number, I believe I would be transferring about 300-400 gig of data each time. Even though I have a gigabit connection between the two servers, I am only seeing 5-6% network utilization. When running the same rsync batch file without stunnel encryption, the throughput was much higher. I would like to see about increasing my throughput with stunnel encryption running. I don't expect it to be as fast as running without stunnel, but I still think I should be able to do better than 5-6% throughput. I am also running a enhanced version of rsync that does not have any issues with NTFS disk fragmentation, since it preallocates the files to the final size before writing. I think the bottleneck is the CPU. To test out this theory, I would like to have multiple copies of the stunnel.exe running, each using their own config file and own port numbers. I don't think the problem is with rsync because it spawns a new process for each connection. Thus, the multiple rsync.exe processes get the advantage of running on top of multiple cores. This is not the case with stunnel.exe. It only uses 1 process, but 8 threads. I am hoping that multiple stunnel.exe instances will fix the bottleneck because each stunnel.exe process could then be running on it's own core. How can I accomplish this? Also, what is the fastest encryption cipher that stills has good security, over 64 bit, preferably at least 128 bit. Any help would be greatly appreciated. Thanks, -John Stunnel.conf on server: cert = my.pem verify = 3 CAfile = my.pem socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 taskbar=no debug = 5 output = stunnel.log [rsynctnl] accept=12345 connect=873 ciphers = AES128-SHA Stunnel.conf on client: cert = my.pem taskbar = no socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 5 output = stunnel.log client = yes [rsynctnl] accept=12345 connect=10.9.8.7:12345 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 2

stunnel as ssh client and self signed certificates
by san san 07 Apr '07

07 Apr '07

Hi, I was planning to use stunnel for my rdp based product. I have several trivial doubts,but since i would be using the same in my product. I would like to know following 1.Actually i want to use stunnel in the same way as ssh i.e Client authentication only , i don't want server authentication at all in my client. So it is possible to not check any server certificate from client side. If i will be using client certificate 2.Is it possible to use self-signed certificate ? I am aware of the drawbacks of using self-signed certificates but because of some inevitable reason i have to use self-signed certificates. I am sorry for my poor knowledge. Regards

1 0

Is it possible to see the "real" IP of the client?
by Konrad Hammerer 05 Apr '07

05 Apr '07

Hi! I want to use STunnel to secure my IMAP connections to my mail server. It works fine but from now on the mail server shows 127.0.0.1 for the open imap client connections. Is there a way to get STunnel forward the real IP or is this impossible? Thanks, Konrad

2 1

How to generate my own certificate for my dynamic dns
by Konrad Hammerer 05 Apr '07

05 Apr '07

Hi! I read somewere, that it is possible to generate a certificate for STunnel. The certificate shipped with the stunnel installer is just for testing purpose, isn't it? So were can I get my own, secure certificate? Thanks, Konrad

2 1

User nobody logging in
by Dimitri Yioulos 29 Mar '07

29 Mar '07

Hi, folks. I've been using stunnel on our mail server (sendmail, spamassassin, clamav, mailscanner, mailwatch). I note the following being written to syslog, and wonder if stunnel is causing it: Mar 29 14:07:31 mail1 su(pam_unix)[29493]: session closed for user nobody Mar 29 14:08:00 mail1 stunnel: LOG5[15993:3076422576]: pop3s accepted connection from 192.168.100.58:1723 Mar 29 14:08:00 mail1 stunnel: LOG5[15993:3076422576]: pop3s connected remote server from 127.0.0.1:33540 Mar 29 14:08:00 mail1 stunnel: LOG5[15993:3076422576]: Connection closed: 138 bytes sent to SSL, 42 bytes sent to socket Mar 29 14:08:43 mail1 su(pam_unix)[29640]: session opened for user nobody by (uid=0) Mar 29 14:08:43 mail1 su(pam_unix)[29640]: session closed for user nobody Mar 29 14:09:00 mail1 stunnel: LOG5[15993:3076422576]: pop3s accepted connection from 192.168.100.58:1724 Mar 29 14:09:00 mail1 stunnel: LOG5[15993:3076422576]: pop3s connected remote server from 127.0.0.1:33544 Mar 29 14:09:00 mail1 stunnel: LOG5[15993:3076422576]: Connection closed: 138 bytes sent to SSL, 42 bytes sent to socket Mar 29 14:10:00 mail1 stunnel: LOG5[15993:3076422576]: pop3s accepted connection from 192.168.100.58:1725 Mar 29 14:10:00 mail1 stunnel: LOG5[15993:3076422576]: pop3s connected remote server from 127.0.0.1:33546 Mar 29 14:10:00 mail1 stunnel: LOG5[15993:3076422576]: Connection closed: 138 bytes sent to SSL, 42 bytes sent to socket Mar 29 14:10:11 mail1 su(pam_unix)[30025]: session opened for user nobody by (uid=0) Mar 29 14:10:11 mail1 su(pam_unix)[30025]: session closed for user nobody Mar 29 14:10:33 mail1 su(pam_unix)[30075]: session opened for user nobody by (uid=0) Mar 29 14:10:33 mail1 su(pam_unix)[30075]: session closed for user nobody Mar 29 14:11:00 mail1 stunnel: LOG5[15993:3076422576]: pop3s accepted connection from 192.168.100.58:1726 Mar 29 14:11:00 mail1 stunnel: LOG5[15993:3076422576]: pop3s connected remote server from 127.0.0.1:33559 Mar 29 14:11:00 mail1 stunnel: LOG5[15993:3076422576]: Connection closed: 138 bytes sent to SSL, 42 bytes sent to socket Mar 29 14:11:03 mail1 su(pam_unix)[30206]: session opened for user nobody by (uid=0) Mar 29 14:11:03 mail1 su(pam_unix)[30206]: session closed for user nobody Mar 29 14:11:06 mail1 su(pam_unix)[30215]: session opened for user nobody by (uid=0) Mar 29 14:11:06 mail1 su(pam_unix)[30215]: session closed for user nobody It's the sessions opened and closed for the user nobody that has me concerned. stunnel appears to be the only process being run by the user nobody. If, in fact, this is caused by stunnel, do I keep these (and only these) session opened/closed instances from being logged? Thanks. Dimitri -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

trouble shooting Pan issue
by eph man 29 Mar '07

29 Mar '07

hi, i'm trying to trouble shoot a problem with a newsreader called pan that i might be having. here's my setup: ubuntu 6.10 kernel 2.6.17 pan 0.14.2 stunnel4 4.150 i created a snntp.conf file with only: client = yes foreground = yes debug = 7 [nntps] accept = localhost:2000 connect = inetnews.worldnet.att.net:563 then i run stunnel4 and this is the output: ephman@wintermute:~$ sudo stunnel4 /etc/stunnel/snntp.conf 2007.03.29 13:54:47 LOG7[13414:3083015856]: RAND_status claims sufficient entropy for the PRNG 2007.03.29 13:54:47 LOG6[13414:3083015856]: PRNG seeded successfully 2007.03.29 13:54:47 LOG7[13414:3083015856]: SSL context initialized for service nntps 2007.03.29 13:54:47 LOG5[13414:3083015856]: stunnel 4.15 on i486-pc-linux-gnu with OpenSSL 0.9.8b 04 May 2006 2007.03.29 13:54:47 LOG5[13414:3083015856]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2007.03.29 13:54:47 LOG6[13414:3083015856]: file ulimit = 1024 (can be changed with 'ulimit -n') 2007.03.29 13:54:47 LOG6[13414:3083015856]: poll() used - no FD_SETSIZE limit for file descriptors 2007.03.29 13:54:47 LOG5[13414:3083015856]: 500 clients allowed 2007.03.29 13:54:47 LOG7[13414:3083015856]: FD 3 in non-blocking mode 2007.03.29 13:54:47 LOG7[13414:3083015856]: FD 4 in non-blocking mode 2007.03.29 13:54:47 LOG7[13414:3083015856]: FD 5 in non-blocking mode 2007.03.29 13:54:47 LOG7[13414:3083015856]: SO_REUSEADDR option set on accept socket 2007.03.29 13:54:47 LOG7[13414:3083015856]: nntps bound to 127.0.0.1:2000 2007.03.29 13:54:47 LOG7[13414:3083015856]: Created pid file /var/run/stunnel4.pid i then startup pan and it won't connect to the server the log file says: Thu, 29 Mar 2007 13:58:15 - Pan 0.14.2.91 Started Thu, 29 Mar 2007 13:58:15 - Directory "/home/ephman/.pan/messages/cache" contains 0.0 MB in 0 files Thu, 29 Mar 2007 13:58:15 - Directory "/home/ephman/.pan/messages/folders/pan.sent" contains 0.0 MB in 0 files Thu, 29 Mar 2007 13:58:15 - Directory "/home/ephman/.pan/messages/folders/pan.sendlater" contains 0.0 MB in 0 files Thu, 29 Mar 2007 13:58:15 - News server connection count: 0 Thu, 29 Mar 2007 13:58:19 - New connection 0x846da08 for inetnews.worldnet.att.net, port 563 Thu, 29 Mar 2007 13:59:21 - NNTP handshake failed: Error reading from socket. Thu, 29 Mar 2007 13:59:21 - Handshake failed: Error reading from socket. Thu, 29 Mar 2007 13:59:26 - New connection 0x84a5850 for inetnews.worldnet.att.net, port 563 any help or hints would be really helpful. thanks. be well, ephman

1 0

Simple Stunnel Question
by mdpeters 28 Mar '07

28 Mar '07

My goal is to have a web server transfer MySQL data via an AES tunnel to a MySQL database server with an added encryption card. Both systems have the same SSL and Stunnel software installed. My web servers database seems to be functioning as normal. I would like to verify that what I have is complete and effective. It is not apparent to me if I have finished construction or how to verify this works like I want it to. I'm not sure how I would verify that Stunnel is being used? Do I need to run Stunnel as a background service full time? Is there something I am missing here? Comments and advice is appreciated! ++++++ # /usr/local/sbin/stunnel -version stunnel 4.20 on sparc-sun-solaris2.10 with OpenSSL 0.9.8e 23 Feb 2007 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv4 Global options debug = 5 pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH key = /usr/local/etc/stunnel/stunnel.pem session = 300 seconds sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none # gcc -v Reading specs from /usr/local/lib/gcc-lib/sparc-sun-solaris2.10/3.3.2/specs Configured with: ../configure --with-as=/usr/ccs/bin/as --with-ld=/usr/ccs/bin/ld --disable-nls Thread model: posix gcc version 3.3.2 # uname -a SunOS slinky 5.10 Generic_118833-17 sun4u sparc SUNW,Ultra-80 # /usr/local/sbin/stunnel -sockets Socket option defaults: Option Accept Local Remote OS default SO_DEBUG -- -- -- 0 SO_DONTROUTE -- -- -- 0 SO_KEEPALIVE -- -- -- 0 SO_LINGER -- -- -- 0:0 SO_OOBINLINE -- -- -- 0 SO_RCVBUF -- -- -- 65535 SO_SNDBUF -- -- -- 65535 SO_RCVLOWAT -- -- -- -- SO_SNDLOWAT -- -- -- -- SO_RCVTIMEO -- -- -- -- SO_SNDTIMEO -- -- -- -- SO_REUSEADDR 1 -- -- 0 IP_TOS -- -- -- 0 IP_TTL -- -- -- 64 TCP_NODELAY -- -- -- 0 # openssl ciphers -v DHE-RSA-AES256-SHA SSLv3 Kx=DH Au=RSA Enc=AES(256) Mac=SHA1 DHE-DSS-AES256-SHA SSLv3 Kx=DH Au=DSS Enc=AES(256) Mac=SHA1 AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 EDH-RSA-DES-CBC3-SHA SSLv3 Kx=DH Au=RSA Enc=3DES(168) Mac=SHA1 EDH-DSS-DES-CBC3-SHA SSLv3 Kx=DH Au=DSS Enc=3DES(168) Mac=SHA1 DES-CBC3-SHA SSLv3 Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1 DES-CBC3-MD5 SSLv2 Kx=RSA Au=RSA Enc=3DES(168) Mac=MD5 DHE-RSA-AES128-SHA SSLv3 Kx=DH Au=RSA Enc=AES(128) Mac=SHA1 DHE-DSS-AES128-SHA SSLv3 Kx=DH Au=DSS Enc=AES(128) Mac=SHA1 AES128-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1 IDEA-CBC-SHA SSLv3 Kx=RSA Au=RSA Enc=IDEA(128) Mac=SHA1 IDEA-CBC-MD5 SSLv2 Kx=RSA Au=RSA Enc=IDEA(128) Mac=MD5 RC2-CBC-MD5 SSLv2 Kx=RSA Au=RSA Enc=RC2(128) Mac=MD5 RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 RC4-MD5 SSLv2 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 EDH-RSA-DES-CBC-SHA SSLv3 Kx=DH Au=RSA Enc=DES(56) Mac=SHA1 EDH-DSS-DES-CBC-SHA SSLv3 Kx=DH Au=DSS Enc=DES(56) Mac=SHA1 DES-CBC-SHA SSLv3 Kx=RSA Au=RSA Enc=DES(56) Mac=SHA1 DES-CBC-MD5 SSLv2 Kx=RSA Au=RSA Enc=DES(56) Mac=MD5 EXP-EDH-RSA-DES-CBC-SHA SSLv3 Kx=DH(512) Au=RSA Enc=DES(40) Mac=SHA1 export EXP-EDH-DSS-DES-CBC-SHA SSLv3 Kx=DH(512) Au=DSS Enc=DES(40) Mac=SHA1 export EXP-DES-CBC-SHA SSLv3 Kx=RSA(512) Au=RSA Enc=DES(40) Mac=SHA1 export EXP-RC2-CBC-MD5 SSLv3 Kx=RSA(512) Au=RSA Enc=RC2(40) Mac=MD5 export EXP-RC2-CBC-MD5 SSLv2 Kx=RSA(512) Au=RSA Enc=RC2(40) Mac=MD5 export EXP-RC4-MD5 SSLv3 Kx=RSA(512) Au=RSA Enc=RC4(40) Mac=MD5 export EXP-RC4-MD5 SSLv2 Kx=RSA(512) Au=RSA Enc=RC4(40) Mac=MD5 export ++++++

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users