stunnel-users

1 participants
3311 discussions

Preventing "choose a digital certificate" pop-up in IE
by Wallace Winfrey 08 May '09

08 May '09

Hello I have browsed the archives but have not found the answer to this question... I have stunnel set up to handle https connections. It sits on a CentOS server alongside HAProxy and works fine with every browser except for Internet Explorer. When I connect with Internet Explorer, I get a blank "Please choose a digital certificate" pop-up. I am pretty sure I have a configuration issue. Here's what I have: socket=l:TCP_NODELAY=1 socket=r:TCP_NODELAY=1 options = NO_SSLv2 ciphers=ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM output = /var/log/stunnel.log [my.host.name] accept=my.external.IP:443 connect=127.0.0.1:8101 xforwardedfor=yes CAfile=/etc/stunnel/GlobalSign.pem cert=/etc/stunnel/my.host.name.pem verify=1 How do we turn off the request for the client certificate in IE? Here are my details....thanks in advance. w * stunnel-4.15-2.el5.1 * I am running it standalone: /usr/sbin/stunnel /etc/stunnel/stunnel.conf * /usr/sbin/stunnel -version stunnel 4.15 on i686-pc-linux-gnu with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv4 Auth:LIBWRAP Global options debug = 5 pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = /usr/local/etc/stunnel/stunnel.pem session = 300 seconds TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none * uname -a: Linux my.host.name 2.6.18-128.1.6.el5 #1 SMP Wed Apr 1 09:19:18 EDT 2009 i686 i686 i386 GNU/Linux * glibc version is 2.5-34 * gcc is not installed, using CentOS RPM * OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008

1 1

patch: TCP keep-alive socket options
by Ludolf Holzheid 08 May '09

08 May '09

Dear list, the attached patch allows for tweaking the TCP keep-alive socket options on Linux 2.4 and later. Thanks to the groundwork laid by Michal, this got fairly trivial. We use this to keep NAT table entries alive for connections that are expected to have idle periods longer than the NAT time-outs of the routers in involved. Ludolf -- --------------------------------------------------------------- Ludolf Holzheid Tel: +49 621 339960 Bihl+Wiedemann GmbH Fax: +49 621 3392239 Floßwörthstraße 41 e-mail: lholzheid(a)bihl-wiedemann.de D-68199 Mannheim, Germany ---------------------------------------------------------------

1 0

Odd termination of stunnel process...
by Robert Nickel 08 May '09

08 May '09

We've been happily using stunnel for quite some time now and have run into a strange problem. At seemingly random intervals, stunnel just freaks out an dies. I don't know if it's getting overwhelmed or what but I'm not seeing anything in the logs for stunnel or any other process. Any help is appreciated. Stunnel is being used to wrap a service that was written without use of the ssl libraries directly and connects to two remote web servers (that happen to be running on the same host, separate ports). Config information: OS: CentOS 5.1 OpenSSL: 0.9.8b stunnel -version: stunnel 4.15 on i686-redhat-linux-gnu with OpenSSL 0.9.8b 04 May 2006 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH key = /etc/stunnel/stunnel.pem session = 300 seconds TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none Config file contents: client=yes foreground=no pid=/var/run/pid chroot=/path/to/chroot setuid=non-priv-user setgid=non-priv-group [webservice1] accept=127.0.0.1:11000 connect=172.16.0.1:11000 [webservice2] accept=127.0.0.1:11001 connect=172.16.0.1:11001 Below are the log lines just before the process disappears: May 4 19:49:18 host stunnel: LOG7[28683:3085368208]: Remote FD=15 initialized May 4 19:49:18 host stunnel: LOG7[28683:3085298576]: SSL state (connect): SSLv3 write client key exchange A May 4 19:49:18 host stunnel: LOG7[28683:3085298576]: SSL state (connect): SSLv3 write change cipher spec A May 4 19:49:18 host stunnel: LOG7[28683:3085298576]: SSL state (connect): SSLv3 write finished A May 4 19:49:18 host stunnel: LOG7[28683:3085716368]: SSL state (connect): SSLv3 read server hello A May 4 19:49:18 host stunnel: LOG7[28683:3085716368]: SSL state (connect): SSLv3 read server certificate A May 4 19:49:18 host stunnel: LOG7[28683:3085298576]: SSL state (connect): SSLv3 flush data May 4 19:49:18 host stunnel: LOG7[28683:3085368208]: SSL state (connect): before/connect initialization May 4 19:49:18 host stunnel: LOG7[28683:3085786000]: SSL alert (write): fatal: handshake failure May 4 19:49:18 host stunnel: LOG3[28683:3085786000]: SSL_connect: 1408C095: error:1408C095:SSL routines:SSL3_GET_FINISHED:digest check failed May 4 19:49:18 host stunnel: LOG5[28683:3085786000]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket May 4 19:49:18 host stunnel: LOG7[28683:3085786000]: replay finished (8 left) May 4 19:49:18 host stunnel: LOG7[28683:3085368208]: SSL state (connect): SSLv3 write client hello A May 4 19:49:18 host stunnel: LOG7[28683:3085716368]: SSL state (connect): SSLv3 read server key exchange A May 4 19:49:18 host stunnel: LOG7[28683:3085716368]: SSL state (connect): SSLv3 read server done A May 4 19:49:18 host stunnel: LOG7[28683:3085928144]: replay accepted FD=18 from 127.0.0.1:40308 May 4 19:49:18 host stunnel: LOG7[28683:3085786000]: replay started May 4 19:49:18 host stunnel: LOG7[28683:3085786000]: FD 18 in non-blocking mode May 4 19:49:18 host stunnel: LOG7[28683:3085786000]: FD 19 in non-blocking mode May 4 19:49:18 host stunnel: LOG7[28683:3085786000]: FD 26 in non-blocking mode May 4 19:49:18 host stunnel: LOG7[28683:3085786000]: Connection from 127.0.0.1:40308 permitted by libwrap May 4 19:49:18 host stunnel: LOG5[28683:3085786000]: replay connected from 127.0.0.1:40308 May 4 19:49:18 host stunnel: LOG7[28683:3085786000]: FD 19 in non-blocking mode May 4 19:49:18 host stunnel: LOG7[28683:3085786000]: replay connecting 160.33.167.33:11026 May 4 19:49:18 host stunnel: LOG7[28683:3085786000]: connect_wait: waiting 10 seconds May 4 19:49:18 host stunnel: LOG7[28683:3085928144]: Cleaning up the signal pipe May 4 19:49:18 host stunnel: LOG6[28683:3085928144]: Child process 13775 finished with code 0 May 4 19:49:18 host stunnel: LOG7[28683:3085646736]: SSL alert (write): fatal: handshake failure May 4 19:49:18 host stunnel: LOG3[28683:3085646736]: SSL_connect: 1408C095: error:1408C095:SSL routines:SSL3_GET_FINISHED:digest check failed May 4 19:49:18 host stunnel: LOG5[28683:3085646736]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket May 4 19:49:18 host stunnel: LOG7[28683:3085716368]: SSL state (connect): SSLv3 write client key exchange A May 4 19:49:18 host stunnel: LOG7[28683:3085716368]: SSL state (connect): SSLv3 write change cipher spec A May 4 19:49:18 host stunnel: LOG7[28683:3085716368]: SSL state (connect): SSLv3 write finished A May 4 19:49:18 host stunnel: LOG7[28683:3085716368]: SSL state (connect): SSLv3 flush data May 4 19:49:18 host stunnel: LOG7[28683:3085646736]: replay finished (8 left) May 4 19:49:18 host stunnel: LOG7[28683:3085855632]: connect_wait: connected May 4 19:49:18 host stunnel: LOG7[28683:3085855632]: Remote FD=17 initialized May 4 19:49:18 host stunnel: LOG7[28683:3085855632]: SSL state (connect): before/connect initialization May 4 19:49:18 host stunnel: LOG7[28683:3085855632]: SSL state (connect): SSLv3 write client hello A May 4 19:49:18 host stunnel: LOG7[28683:3085928144]: replay accepted FD=22 from 127.0.0.1:40310 May 4 19:49:18 host stunnel: LOG7[28683:3085646736]: replay started May 4 19:49:18 host stunnel: LOG7[28683:3085646736]: FD 22 in non-blocking mode May 4 19:49:18 host stunnel: LOG7[28683:3085646736]: FD 23 in non-blocking mode May 4 19:49:18 host stunnel: LOG7[28683:3085646736]: FD 26 in non-blocking mode May 4 19:49:18 host stunnel: LOG7[28683:3085928144]: Cleaning up the signal pipe May 4 19:49:18 host stunnel: LOG6[28683:3085928144]: Child process 13777 finished with code 0 May 4 19:49:18 host stunnel: LOG7[28683:3085646736]: Connection from 127.0.0.1:40310 permitted by libwrap May 4 19:49:18 host stunnel: LOG5[28683:3085646736]: replay connected from 127.0.0.1:40310 May 4 19:49:18 host stunnel: LOG7[28683:3085646736]: FD 23 in non-blocking mode May 4 19:49:18 host stunnel: LOG7[28683:3085646736]: replay connecting 160.33.167.33:11026 May 4 19:49:18 host stunnel: LOG7[28683:3085646736]: connect_wait: waiting 10 seconds May 4 19:49:18 host stunnel: LOG7[28683:3085507472]: SSL state (connect): SSLv3 read server hello A May 4 19:49:18 host stunnel: LOG7[28683:3085507472]: SSL state (connect): SSLv3 read server certificate A May 4 19:49:18 host stunnel: LOG7[28683:3085507472]: SSL state (connect): SSLv3 read server key exchange A May 4 19:49:18 host stunnel: LOG7[28683:3085507472]: SSL state (connect): SSLv3 read server done A May 4 19:49:18 host stunnel: LOG7[28683:3085786000]: connect_wait: connected May 4 19:49:18 host stunnel: LOG7[28683:3085786000]: Remote FD=19 initialized May 4 19:49:18 host stunnel: LOG7[28683:3085786000]: SSL state (connect): before/connect initialization May 4 19:49:18 host stunnel: LOG7[28683:3085786000]: SSL state (connect): SSLv3 write client hello A May 4 19:49:18 host stunnel: LOG7[28683:3085298576]: SSL alert (write): fatal: handshake failure May 4 19:49:18 host stunnel: LOG3[28683:3085298576]: SSL_connect: 1408C095: error:1408C095:SSL routines:SSL3_GET_FINISHED:digest check failed May 4 19:49:18 host stunnel: LOG5[28683:3085298576]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket May 4 19:49:18 host stunnel: LOG7[28683:3085298576]: replay finished (8 left) May 4 19:49:18 host stunnel: LOG7[28683:3085507472]: SSL state (connect): SSLv3 write client key exchange A May 4 19:49:18 host stunnel: LOG7[28683:3085507472]: SSL state (connect): SSLv3 write change cipher spec A May 4 19:49:18 host stunnel: LOG7[28683:3085507472]: SSL state (connect): SSLv3 write finished A May 4 19:49:18 host stunnel: LOG7[28683:3085507472]: SSL state (connect): SSLv3 flush data May 4 19:49:18 host stunnel: LOG7[28683:3085925264]: SSL alert (write): fatal: handshake failure May 4 19:49:18 host stunnel: LOG3[28683:3085925264]: SSL_connect: 1408C095: error:1408C095:SSL routines:SSL3_GET_FINISHED:digest check failed May 4 19:49:18 host stunnel: LOG5[28683:3085925264]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket May 4 19:49:18 host stunnel: LOG7[28683:3085925264]: replay finished (7 left) May 4 19:49:18 host stunnel: LOG7[28683:3085368208]: SSL state (connect): SSLv3 read server hello A May 4 19:49:18 host stunnel: LOG7[28683:3085368208]: SSL state (connect): SSLv3 read server certificate A May 4 19:49:18 host stunnel: LOG7[28683:3085368208]: SSL state (connect): SSLv3 read server key exchange A May 4 19:49:18 host stunnel: LOG7[28683:3085368208]: SSL state (connect): SSLv3 read server done A May 4 19:49:18 host stunnel: LOG7[28683:3085577104]: SSL state (connect): SSLv3 read server hello A May 4 19:49:18 host stunnel: LOG7[28683:3085577104]: SSL state (connect): SSLv3 read server certificate A May 4 19:49:18 host stunnel: LOG7[28683:3085577104]: SSL state (connect): SSLv3 read server key exchange A May 4 19:49:18 host stunnel: LOG7[28683:3085577104]: SSL state (connect): SSLv3 read server done A [stunnel vanishes at this point. No core, no logs. POOF!] The lines that stand out to me are the SSL_connect digest errors, the finished lines (showing the number of queued requests in parenthesis?) and the fatal handshake failure. Another odd log entry that I'm seeing often is this transfer() loop error: May 4 21:12:53 host stunnel: LOG3[14341:3085822864]: transfer() loop executes not transferring any data May 4 21:12:53 host stunnel: LOG3[14341:3085822864]: please report the problem to Michal.Trojnara(a)mirt.net May 4 21:12:53 host stunnel: LOG3[14341:3085822864]: socket open: rd=no wr=yes, ssl open: rd=no wr=no May 4 21:12:53 host stunnel: LOG3[14341:3085822864]: socket ready: rd=yes wr=no, ssl ready: rd=no wr=no May 4 21:12:53 host stunnel: LOG3[14341:3085822864]: ssl want: rd=no wr=no May 4 21:12:53 host stunnel: LOG3[14341:3085822864]: socket input buffer: 0 byte(s), ssl input buffer: 29 byte(s) May 4 21:12:53 host stunnel: LOG3[14341:3085822864]: check_SSL_pending=0, ssl_closing=3 May 4 21:12:53 host stunnel: LOG5[14341:3085822864]: Connection reset: 238 bytes sent to SSL, 225 bytes sent to socket Don't know if it's related but might as well post it along as a possible symptom. Thanks, --Robert

2 1

[PATCH] Fix undefined aliasing in libwrap.c
by Miloslav Trmac 02 May '09

02 May '09

Hello, The attached patch changes the code not to access a part of a char[...] array using an int *, which is undefined in ISO C. Using memcpy() is safe. I would have posted it on in the BTS, but it doesn't allow me even to log in... Thank you, Mirek

3 4

Re: [stunnel-users] stunnel-users Digest, Vol 57, Issue 10
by Brian P Hinz 22 Apr '09

22 Apr '09

>> Does stunnel support the use of the aNULL cipher suites? I can't >> seem to make it work, stunnel just fails with a "no shared >> ciphers" message. I don't think that the problem is with openssl >> or the client, since when I test it with s_server the handshake >> completes. >> > > >Review the default cipher list. > >Do... > >stunnel -version > > >Then edit configuration file ciphers options to suit requirements. I was trying to get stunnel working with anonymous ciphers (SSL_DH_anon_WITH_RC4_MD5_128, etc.) from a java based client and found that s_server succeeded while stunnel failed with the "no shared ciphers" message because it has routines to initialize a temporary DH key in the absence of a certificate. Here's a sloppy patch that just borrows those routines from the s_server source code. This is against an older version of stunnel (RHEL4u7 based system), but the latest version also fails without similar patching. Cheers, -brian # cat /usr/src/redhat/SOURCES/stunnel-4.05-dhe.patch --- stunnel-4.05/src/ssl.c.dhe 2004-01-25 14:26:03.000000000 -0500 +++ stunnel-4.05/src/ssl.c 2009-04-22 00:11:10.000000000 -0400 @@ -236,6 +236,32 @@ return -1; /* FAILED */ } +static unsigned char dh512_p[]={ + 0xDA,0x58,0x3C,0x16,0xD9,0x85,0x22,0x89,0xD0,0xE4,0xAF,0x75, + 0x6F,0x4C,0xCA,0x92,0xDD,0x4B,0xE5,0x33,0xB8,0x04,0xFB,0x0F, + 0xED,0x94,0xEF,0x9C,0x8A,0x44,0x03,0xED,0x57,0x46,0x50,0xD3, + 0x69,0x99,0xDB,0x29,0xD7,0x76,0x27,0x6B,0xA2,0xD3,0xD4,0x12, + 0xE2,0x18,0xF4,0xDD,0x1E,0x08,0x4C,0xF6,0xD8,0x00,0x3E,0x7C, + 0x47,0x74,0xE8,0x33, +}; + +static unsigned char dh512_g[]={ + 0x02, +}; + +static DH *get_dh512(void); + +static DH *get_dh512(void) { + DH *dh=NULL; + + if ((dh=DH_new()) == NULL) return(NULL); + dh->p=BN_bin2bn(dh512_p,sizeof(dh512_p),NULL); + dh->g=BN_bin2bn(dh512_g,sizeof(dh512_g),NULL); + if ((dh->p == NULL) || (dh->g == NULL)) + return(NULL); + return(dh); +} + static int init_dh(void) { #ifdef USE_DH FILE *fp; @@ -274,6 +300,12 @@ log(LOG_INFO, "Diffie-Hellman initialized with %d bit key", 8*DH_size(dh)); DH_free(dh); +#else + DH *dh=NULL; + log(LOG_INFO,"Using default temp DH parameters\n"); + dh=get_dh512(); + SSL_CTX_set_tmp_dh(ctx,dh); + DH_free(dh); #endif /* USE_DH */ return 0; /* OK */ }

1 0

aNULL ciphers
by Brian P Hinz 20 Apr '09

20 Apr '09

Hi, Does stunnel support the use of the aNULL cipher suites? I can't seem to make it work, stunnel just fails with a "no shared ciphers" message. I don't think that the problem is with openssl or the client, since when I test it with s_server the handshake completes. Thanks, -brian

1 0

Issue resolving path to .conf using DFS and changing from "by name" to "by IP address"
by Peterson, Stephen 17 Apr '09

17 Apr '09

We use stunnel 4.20 and encountered a problem today and hope someone may be able to provide some insight to a solution. Our client machines are all Windows XP machines with stunnel started as a service. Those installs of stunnel have the path to the .conf as part of the path to the executable. The path to the .conf uses a DFS share. Our network administrator changed our DFS share from "by name" to "by IP address" and then the client services could not resolve the location of the .conf file when the services started on the next start up of client machines. Has anyone encountered this before and what did you do to fix it? Thanks for any assistance. Stephen

1 0

error during multithreaded operation
by Dale Kingsbury 13 Apr '09

13 Apr '09

OS: Windows 2003 SP2 SDK: 2003 R2 SDK We have a multithreaded application that uses a REST-style interface to an SSL-enabled UNIX box that only uses AES. I tried using WinHTTP, but unfortunately, AES is broken in the 2003 version of WinHTTP (confirmed by M$). SO, I hook up stunnel, which works fine when I only start one thread, but if I use more than 1 thread, I get the following error in the stunnel.log. Note that the error is on thread 7140, and the connection is immediately closed. I have retry logic that re-starts failed threads, and the restarted thread works the second time. (of course, the first has finished, so it is essentially running by itself.) The other item of interest is that each thread is sending about 500,000 bytes of data in chunks of 16,000 bytes, and my trace shows that it usually fails after having written more than 100,000 bytes successfully. Any suggestions or help would be greatly appreciated... 2009.04.10 13:17:01 LOG7[3016:7040]: SSL state (connect): SSLv3 flush data 2009.04.10 13:17:01 LOG7[3016:7140]: SSL alert (write): fatal: decrypt error <<<<< ----- NOTE FAILS HERE ON thread 7140 2009.04.10 13:17:01 LOG7[3016:7040]: SSL state (connect): SSLv3 read finished A 2009.04.10 13:17:01 LOG7[3016:7040]: 0 items in the session cache 2009.04.10 13:17:01 LOG7[3016:7040]: 20 client connects (SSL_connect()) 2009.04.10 13:17:01 LOG7[3016:7040]: 19 client connects that finished 2009.04.10 13:17:01 LOG7[3016:7040]: 0 client renegotiations requested 2009.04.10 13:17:01 LOG7[3016:7040]: 0 server connects (SSL_accept()) 2009.04.10 13:17:01 LOG7[3016:7040]: 0 server connects that finished 2009.04.10 13:17:01 LOG7[3016:7040]: 0 server renegotiations requested 2009.04.10 13:17:01 LOG7[3016:7040]: 0 session cache hits 2009.04.10 13:17:01 LOG7[3016:7040]: 0 session cache misses 2009.04.10 13:17:01 LOG7[3016:7040]: 0 session cache timeouts 2009.04.10 13:17:01 LOG6[3016:7040]: SSL connected: new session negotiated 2009.04.10 13:17:01 LOG6[3016:7040]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 2009.04.10 13:17:01 LOG3[3016:7140]: SSL_connect: 1408C095: error:1408C095:SSL routines:SSL3_GET_FINISHED:digest check failed 2009.04.10 13:17:01 LOG5[3016:7140]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2009.04.10 13:17:01 LOG7[3016:7140]: bycast-write-1 finished (1 left) Configuratation file: ;Stunnel configuration for Acuo. ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode client=yes verify=0 ; Service-level configuration [bycast-read-1] accept = 18080 connect = 10.220.8.100:8080 ;ciphers=AES128-SHA:AES256-SHA TIMEOUTclose = 0 sslVersion = TLSv1 Dale Kingsbury Founder - Lead Software Engineer Phone: 651-744-9225 << NOTE new number Fax: 651-730-4231 Cel: 651-592-5204 email: dale(a)acuotech.com <mailto:[email protected]> RSNA Booth #4980

2 1

Re: [stunnel-users] OpenSSL Vulnerabilities
by Cal Webster 09 Apr '09

09 Apr '09

On Thu, 2009-04-09 at 12:08 -0500, Guy wrote: > Cal Webster wrote: > > > > Do these SSL libraries still require "MSVCR90.dll" from the > > "Visual C++ Redistributables"? > > > > I appreciate the swift response. :-) > > > > > No, the only Microsoft C Runtime Library dependency is MSVCRT.DLL > (see below output) Thank you. I see that. I've also confirmed by uninstalling "Visual C++ Redistributables" and the OpenSSL package from "slproweb.com". The stunnel service starts up and runs fine with the latest stunnel version 4.27b2. -----------[From stunnel.log]----------- 2009.04.09 14:56:11 LOG7[1240:1236]: RAND_status claims sufficient entropy for the PRNG 2009.04.09 14:56:11 LOG7[1240:1236]: PRNG seeded successfully 2009.04.09 14:56:11 LOG7[1240:1236]: SSL context initialized for service vnc1 2009.04.09 14:56:11 LOG7[1240:1236]: SSL context initialized for service vnc2 2009.04.09 14:56:11 LOG7[1240:1236]: SSL context initialized for service vnc3 2009.04.09 14:56:11 LOG5[1240:1236]: stunnel 4.27 on x86-pc-mingw32-gnu with OpenSSL 0.9.8k 25 Mar 2009 2009.04.09 14:56:11 LOG5[1240:1236]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv4 2009.04.09 14:56:11 LOG5[1240:1260]: No limit detected for the number of clients 2009.04.09 14:56:11 LOG7[1240:1260]: FD 312 in non-blocking mode 2009.04.09 14:56:11 LOG7[1240:1260]: SO_REUSEADDR option set on accept socket 2009.04.09 14:56:11 LOG7[1240:1260]: vnc1 bound to 127.0.0.1:5973 2009.04.09 14:56:11 LOG7[1240:1260]: FD 320 in non-blocking mode 2009.04.09 14:56:11 LOG7[1240:1260]: SO_REUSEADDR option set on accept socket 2009.04.09 14:56:11 LOG7[1240:1260]: vnc2 bound to 127.0.0.1:5972 2009.04.09 14:56:11 LOG7[1240:1260]: FD 328 in non-blocking mode 2009.04.09 14:56:11 LOG7[1240:1260]: SO_REUSEADDR option set on accept socket 2009.04.09 14:56:11 LOG7[1240:1260]: vnc3 bound to 127.0.0.1:15900 -----------[/From stunnel.log]----------- > > On Tue, 2009-04-07 at 19:34 -0500, Guy wrote: ... > $ listdlls -r stunnel > > ListDLLs v2.25 - DLL lister for Win9x/NT > Copyright (C) 1997-2004 Mark Russinovich > Sysinternals - www.sysinternals.com Thank you for the link. I've downloaded and installed the GUI version, "Process Explorer", on a test machine. I'm pleasantly surprised at its utility and light impact on system resources. One more question please: Will the Win32 binaries at the link you provided <ftp://stunnel.mirt.net/stunnel> keep up fairly closely with the latest OpenSSL releases? With OpenSSL so widely used it is constantly being evaluated for vulnerabilities. When they're found, it is patched quickly but dependent applications are sometimes slow to incorporate patched versions. Thanks again for your excellent help. ./Cal

1 0

Re: [stunnel-users] OpenSSL Vulnerabilities
by Cal Webster 09 Apr '09

09 Apr '09

Thank you Guy! I'll try the Win32 binaries and SSL libraries on a test machine. Do these SSL libraries still require "MSVCR90.dll" from the "Visual C++ Redistributables"? I appreciate the swift response. :-) ./Cal On Tue, 2009-04-07 at 19:34 -0500, Guy wrote: > Cal Webster wrote: > > > To update the OpenSSL libraries you must download and... > > > > > Find OpenSSL v.0.9.8k bins and stunnel-4.27b2-installer > (which includes OpenSSL v.0.9.8k DLLs) at: > > <ftp://stunnel.mirt.net/stunnel> >

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users