stunnel-users

1 participants
3311 discussions

Re: [stunnel-users] using webdav: YES IT WORKS WITH NET USE
by delaage.pierre＠free.fr 18 Jul '09

18 Jul '09

Well after some more tests I achieve net use to work: UseBasicAuth is VITAL on the xp client (reboot) Accordingly configure apache with basic plain text auth stunnel routing localhost:80 to remote:443 (as you did) to pass your credentials use EXACTLY this command line : net use y: \\localhost\davfolder (with no extra \) YOURPASSWORD /USER:YOURUSERNAME (this in the only way to have hhtp credentials sent to the server). tested on client: xpsp2 + kb892211 + kb911927 (IMPORTANT ALSO, needs reboot) + stunnel 427 and server apache 2.2.6/Mandriva 2008. kb907306 replaces 892211, but I have not tested with it (I think it should work). If you cannot achieve it to work please let me know the exact error message you receive from windows. Again your problem is only related to windows issue, not stunnel. Pierre Quoting Jan-Florian Hilgenberg <florianhilgenberg(a)googlemail.com>: > yes, i am the admin. have pulled it back to basic auth. > okay i have installed Webfldrs-KB907306-ENU.exe and checked for its listing > in systemcontrol -> software (show updates) - it does not appear there! :-( > add network location: > it is running directly to the server and through stunnel, too :-) > > wtf? i have to install office2003 for such a problem? mh okay, i did so - no > change in behaviour - mh the failures of net use are changing - now it is a > systemfailure 67. networkname not found > syntax: net use x: \\127.0.0.1\user /user:user > > thank you - flo > > > 2009/7/18 <delaage.pierre(a)free.fr> > > > A question : > > Are you the administrator of your web server ? > > if yes : set up apache with "basic authentication", not digest (this will > > not be > > a problem later with ssl) and setup the registry key usebasicauth to 1 on > > your > > client. > > SP3 does NOT contain kb907306 : so install it (you will not damage your > > system > > if this patch is already in it). > > Forget net use for the moment : "add network location" should work first. > > > > IMPORTANT : "add network location" supports SSL WITHOUT the need of > > stunnel, so > > try to setup directly a "location" pointing to " > > https://yourserver/yourfolder". > > of course you will need to install first your own certificate with > > "internet > > explorer", so that windows can use it to connect to your ssl server. > > > > Something else : check this http://support.microsoft.com/KB/942392 > > ...ie be sure that your server allow browsing dav space FROM the root url. > > Moreover, always according to kb942392, to have net use working one must > > have > > ...MS office installed! > > > > Pierre > > > > > > Quoting Jan-Florian Hilgenberg <florianhilgenberg(a)googlemail.com>: > > > > > ok, i thought that i've sp3 in my virtualbox... but it is installed now - > > > and all other updates too! > > > i've tested with digest authentification now - but it isn't running. > > > the remote server is a debian lenny with apache2.2. > > > the ssl certificate is validated by Equifax Secure Inc. > > > ie7: sure :) and i am confused in the moment the mapping in networkarea > > as > > > addition web ressource isn't running. tried it with ssl in the past (was > > > running) and now without ssl, there appears this log in apache: > > > [Sat Jul 18 00:30:33 2009] [error] [client ip] user > > > subdomain.example.de\user > > > not found: / > > > for the digest method the same with "realm" > > > however there is no preview for the files with this method, and that is > > what > > > i need :( > > > > > > i think i haven't installed kb907306 in the moment(mh ok maybe it is in > > > servicepack 3 ?), but i don't know what you mean with dbl click feature > > :-( > > > > > > i'm really pleased for your help :-) > > > > > > 2009/7/17 <delaage.pierre(a)free.fr> > > > > > > > Next step : > > > > be sure to have kb892211 (preferred) or more recent kb907306 (suppress > > dbl > > > > click > > > > feature!) installed on your system and retry. > > > > Yes you have to create the registry key by hand on your client system, > > > > but you really have to know more about your server authentication > > process. > > > > About ie7 : have you been able to browse in your webfolders, via a > > folder > > > > view? > > > > > > > > Try also adding your web folder to windows explorer by using "Add > > Network > > > > location", which is another mechanism than mapping a drive letter, and > > more > > > > often works. > > > > > > > > See you soon, > > > > Pierre Delaage > > > > > > > > > > > > > > > > Quoting Jan-Florian Hilgenberg <florianhilgenberg(a)googlemail.com>: > > > > > > > > > wow thank you, some really good tips :) > > > > > i tested it with ie 7 and it is running fine. > > > > > then i've set the regkey, is it right that i have to create it by > > myself? > > > > > rebooted - and no, there is the same error :-( > > > > > the gui for the net use command ( explorer/tools/ map networkdrive) > > isn't > > > > > running, too! > > > > > > > > > > i really hope, that any body could help me > > > > > thank you > > > > > > > > > > > > > > > 2009/7/17 <delaage.pierre(a)free.fr> > > > > > > > > > > > Hello, > > > > > > There are many things to check on Windows configuration before > > > > > > checking potential issues in stunnel. > > > > > > > > > > > > At first you should check what is the HTTP authentication mechanism > > > > used by > > > > > > your > > > > > > webdav server : > > > > > > if this server is using "basic plain text authentication", this > > WILL > > > > NOT BE > > > > > > supported by the windows "webdav redirector" (the system component > > that > > > > > > allows > > > > > > you to map a webdav folder to a virtual system drive)...unless you > > set > > > > up > > > > > > this > > > > > > registry key : > > > > > > > > > > > > > > > > [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesWebClientParameters] > > > > > > "UseBasicAuth"=dword:00000001 > > > > > > > > > > > > Check this page for some MS explanations: > > > > > > > > http://technet.microsoft.com/en-us/library/cc787023%28WS.10%29.aspx > > > > > > > > > > > > Something else to check : try to open your webdav location by using > > > > > > "internet > > > > > > explorer 6 or 7"/file-open/check "web folder" checkbox. let us know > > > > whether > > > > > > it > > > > > > works. > > > > > > Try also by "Explorer/Tools/Map network drive", but it is very > > painful > > > > by > > > > > > asking > > > > > > many times for credentials. > > > > > > > > > > > > Yours sincerely, > > > > > > Pierre Delaage > > > > > > > > > > > > Selon Jan-Florian Hilgenberg <florianhilgenberg(a)googlemail.com>: > > > > > > > > > > > > > > > > > > > hi - i want to use webdav through stunnel to provide a > > drive(letter). > > > > > > > system: winxp sp3 > > > > > > > net use http://127.0.0.1/dirname /user:someuser > > > > > > > offers a systemfailure 64... stunnel log said SSL_connect: > > 1408F06B: > > > > > > > error:1408F06B:SSL routines:SSL3_GET_RECORD:bad decompression > > > > > > > but a connection with firefox is running fine. > > > > > > > i am doing try&error for about a week and i am sick now :( > > > > > > > i hope you can help me - thank you > > > > > > > > > > > > > > client=yes > > > > > > > verify=0 > > > > > > > [psuedo-https] > > > > > > > accept = 80 > > > > > > > connect = ssl.studenten-wg-halle.de:443 > > > > > > > TIMEOUTclose = > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

1 0

using webdav
by Jan-Florian Hilgenberg 17 Jul '09

17 Jul '09

hi - i want to use webdav through stunnel to provide a drive(letter). system: winxp sp3 net use http://127.0.0.1/dirname /user:someuser offers a systemfailure 64... stunnel log said SSL_connect: 1408F06B: error:1408F06B:SSL routines:SSL3_GET_RECORD:bad decompression but a connection with firefox is running fine. i am doing try&error for about a week and i am sick now :( i hope you can help me - thank you client=yes verify=0 [psuedo-https] accept = 80 connect = ssl.studenten-wg-halle.de:443 TIMEOUTclose =

2 1

Common Name checking
by Mark Bolton 15 Jul '09

15 Jul '09

Hi, I believe this has been discussed before on the list but I wanted to get a better understanding and confirm the current situation. Is it still correct that when using verify=2, the peer's hostname is not checked (via a name service lookup) to match the Common Name in the presented certificate? With the main reason being that you cannot necessarily trust the name service? I am asking because we have a closed network in which we do trust our dns servers, and Common Name checking would be advantageous to us given the following scenario: We have is that a single (central) host that connects to multiple 'client' hosts via stunnel. The central host presents a certificate signed by our own CA. Each client has a copy of our CA's certificate and has verify=2. So when the central server connects, the client checks that the certificate presented has really been signed by our own CA. So using this mechanism, only servers (i.e. the central server) with a signed certificate are allowed to connect. All good so far, however the problem is if the signed certificate is copied (stolen) to another server. This 'other' server can connect to all the clients also. With Common Name checking, the clients could as well as checking the signature, check the presenting host has the same hostname as in the certificate. Is there anyway we can use stunnel to help us guard against this 'stolen cert' situation or if not what else could we do? Thanks, Mark

2 3

[patch] add new option send_client_info
by Henrik Riomar 14 Jul '09

14 Jul '09

Hi, The attached patch adds a new option that allows stunnel to pass on some client information to for instance a web service that uses stunnel for it's encryption. The first line of data contains the client info and if the new option is not enabled the patch does nothing. Regards, Henrik Riomar P.S. public domain.

1 0

stunnel throttling and statistics
by Laurens Van Houtven 10 Jul '09

10 Jul '09

Hi! I'm using stunnel to secure an AMQP message broker (RabbitMQ, specifically) using pre-shared certificates. This means that my backends never get to see the SSL certificate that the client used to connect -- unfortunately, it's that very backend that's the first who can decide if a message is malicious or not. In order to sort-of fix this problem, I'm using UUIDs so that the keyspace is so absurdly huge that the odds that someone will guess a key are second to none. Still, if someone is misbehaving (trying a large number of bogus keys) it would be nice to know who it is so I could stop wasting CPU time and bandwidth on them. So, I was wondering if anyone has used stunnel (vanilla or modified) to keep statistical data about who connects (which certificates). Additionally, does anyone know of a decent way to throttle per-certificate (or limit the amount of tunnels that can be opened per certificate). If all else fails I could just do normal throttling on a per-IP basis, which should get me roughly the same thing. The reason I want this is because I want to prevent users from even *trying* a large number of such keys (even though it's statistically unlikely that they'll get one) since it still takes me CPU time to process that junk. Thanks in advance Laurens

2 1

Re: [stunnel-users] Dynamic hosts
by Ludolf Holzheid 29 Jun '09

29 Jun '09

On Tue, 2009-06-23 20:52:30 -0400, Terry Riegel wrote: > > On Jun 23, 2009, at 11:01 AM, Ludolf Holzheid <lholzheid(a)bihl-wiedemann.de > > wrote: > > > >On Tue, 2009-06-23 10:33:14 -0400, Terry Riegel wrote: > >> > >>If I did it the way you are suggesting then 5 concurrent users would > >>fire up 30 processes. On my system starting the daemon starts 6 > >>processes, and if I start it up again I get another 6 processes. > > > >Is this still true with 'foreground = yes'? > > Yes. You are right. On detaching to the background, there is an additional fork(), but the parent dies early. So the number of persistent processes is the same. > >For reducing the number of processes, you might also try to configure > >stunnel with --disable-libwrap. > > I can try that wasn't aware of it as a configuration option There is also a '--with-threads=pthread' option that may help to lower the number of processes. However, on modern operating systems, fork()ing is not as expensive as it looks like. In most cases, the text segment is shared between the two processes and the pages on data/BSS segments are not copied until changed ('copy-on-write'). I don't know if the usage of OS resources is larger for the multi-threaded or the multi-tasked approach. Ludolf P.S.: Please reply to the list, so the community is able to follow all of the thread. -- --------------------------------------------------------------- Ludolf Holzheid Tel: +49 621 339960 Bihl+Wiedemann GmbH Fax: +49 621 3392239 Floßwörthstraße 41 e-mail: lholzheid(a)bihl-wiedemann.de D-68199 Mannheim, Germany ---------------------------------------------------------------

4 6

stunnel - connection issue with larger number of connections
by Franjo Stipanovic 26 Jun '09

26 Jun '09

Hello, have anyone experienced a issue with stunnel when there's a larger number of concurrent connections (>50)? I've got my application service and stress tester for it. I've placed stunnel in front of application service because I allow clients only to connect to application service using SSL. When stress tester communicates directly with application service with 100 concurrent connections (threads) there's no issue, but when I connect over SSL (thru stunnel) more than 50% of connections fails with error : connection refused :( Seems like there's a limit in windows server for number of threads per process since stunnel does one thread per connection, right? Any idea on how can I test this further? stunnel information: stunnel 4.22 on x86-pc-mingw32-gnu with OpenSSL 0.9.8g 19 Oct 2007 Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 Global options debug = 5 RNDbytes = 64 RNDoverwrite = yes service = stunnel taskbar = yes Service-level options cert = stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none Socket option defaults: Option Accept Local Remote OS default SO_DEBUG -- -- -- 0 SO_DONTROUTE -- -- -- 0 SO_KEEPALIVE -- -- -- 0 SO_LINGER -- -- -- 0:0 SO_OOBINLINE -- -- -- 0 SO_RCVBUF -- -- -- 8192 SO_SNDBUF -- -- -- 8192 SO_RCVLOWAT -- -- -- -- SO_SNDLOWAT -- -- -- -- SO_RCVTIMEO -- -- -- 0:0 SO_SNDTIMEO -- -- -- 0:0 SO_REUSEADDR 1 -- -- 0 IP_TOS -- -- -- 0 IP_TTL -- -- -- 32 TCP_NODELAY -- -- -- 0 Software configuration: Windows Server 2003 R2 - Enterprise x64 Edition Hardware configuration: Intel Core 2 Duo 1 GB RAM Kind regards, fritz

1 0

Re: [stunnel-users] Dynamic hosts
by Ludolf Holzheid 23 Jun '09

23 Jun '09

On Tue, 2009-06-23 10:33:14 -0400, Terry Riegel wrote: > Well, that would be one way of doing it. I would prefer to have > stunnel running as a daemon and just pass a FQDN and local port number > to it. But it may not be able to do that. You are right. Currently, stunnel's configuration can't be changed at run-time (and I still don't see a need for that). > If I did it the way you are suggesting then 5 concurrent users would > fire up 30 processes. On my system starting the daemon starts 6 > processes, and if I start it up again I get another 6 processes. Is this still true with 'foreground = yes'? For reducing the number of processes, you might also try to configure stunnel with --disable-libwrap. If you run stunnel from within a CGI, you will be accepting connections from localhost only anyway. HTH, Ludolf -- --------------------------------------------------------------- Ludolf Holzheid Tel: +49 621 339960 Bihl+Wiedemann GmbH Fax: +49 621 3392239 Floßwörthstraße 41 e-mail: lholzheid(a)bihl-wiedemann.de D-68199 Mannheim, Germany ---------------------------------------------------------------

1 0

Re: [stunnel-users] Dynamic hosts
by Ludolf Holzheid 23 Jun '09

23 Jun '09

On Tue, 2009-06-23 08:13:08 -0400, Terry Riegel wrote: > Take a look at mail2web.com > > You type in your server, it dynamically connects secure or otherwise. Ah, o.k. you want to use stunnel from inside a CGI. You could have the CGI dynamically write the stunnel configuration file then. Maybe you should specify 'foreground = yes' in order to avoid detaching to the background and to get stunnel's log messages written to the web server log. This depends on the CGI, of course. Ludolf -- --------------------------------------------------------------- Ludolf Holzheid Tel: +49 621 339960 Bihl+Wiedemann GmbH Fax: +49 621 3392239 Floßwörthstraße 41 e-mail: lholzheid(a)bihl-wiedemann.de D-68199 Mannheim, Germany ---------------------------------------------------------------

1 0

Dynamic hosts
by Terry Riegel 23 Jun '09

23 Jun '09

Hello, I have just set up stunnel to allow unsecured client pop3 connections to my secured pop3 server chroot = /stunnel/ pid = /stunnel.pid setuid = www setgid = www client = yes foreground=yes [995] accept = localhost:10110 connect = mail.clearimageonline.com:995 And it works as expected. Is there a way to set it up so it can dynamically connect to any server. Something like... connect = *:995 I was able to start a new instance of stunnel with a separate config file but this seems inefficient as it starts up 6 processes each time. What I would like to do is dynamically add/subtract servers that it can connect to. My goal here is to build a webmail client that can use stunnel to do the secure connections to either POP or IMAP servers. My client software uses unsecured sockets. Any help would be greatly appreciated. Terry Riegel

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users