stunnel-users

3 participants
3308 discussions

startup issues
by Coviello, Paul 24 Apr '15

24 Apr '15

Hi, Well I got it started on VMS and wanted to put it in debug mode, so I shut it down made my changes to the conf file and now well I can't start it with the command procedure. I even tried the old conf and same thing... $ @STUNNEL_STARTUP_SERVER Is the private key (in the PEM file) encrypted? [Y/N]: Y Enter the password to decrypt the key (please use paired double quotes with it): ""XXXXXXXXX"" Starting up a Stunnel %RUN-S-PROC_ID, identification of created process is 209FCA70 Stunnel server failed to start up-- check the configuration, etc. Nothing is logged... But if I do the following $ stunnel STUNNEL_SERVER.CONF And the output to the screen... 2015.04.24 10:35:24 LOG7[547326662:2071228096]: Snagged 64 random bytes from sys$common:[sysmgr].rnd 2015.04.24 10:35:24 LOG7[547326662:2071228096]: Wrote 1024 new random bytes to sys$common:[sysmgr].rnd 2015.04.24 10:35:24 LOG7[547326662:2071228096]: RAND_status claims sufficient entropy for the PRNG 2015.04.24 10:35:24 LOG7[547326662:2071228096]: PRNG seeded successfully 2015.04.24 10:35:24 LOG7[547326662:2071228096]: Certificate: stunnel.pem 2015.04.24 10:35:24 LOG7[547326662:2071228096]: Certificate loaded 2015.04.24 10:35:24 LOG7[547326662:2071228096]: Key file: stunnel.pem Enter PEM pass phrase: 2015.04.24 10:35:31 LOG7[547326662:2071228096]: Private key loaded 2015.04.24 10:35:31 LOG7[547326662:2071228096]: SSL context initialized for service telnet This is where it sits unless I do a ctrl-c to cancel and get back to the system prompt. And when I do my telnet session I cannot connect. Well I connect but no prompts for me to login But now I have log output! :) 2015.04.24 10:08:31 LOG5[547326662:2071228096]: stunnel undefined on vax-openvms with OpenSSL 0.9.8h 28 May 2008 2015.04.24 10:08:31 LOG5[547326662:2071228096]: Threading:PTHREAD Sockets:POLL,IPv4 2015.04.24 10:08:31 LOG6[547326662:2071228096]: file ulimit = 512 (can be changed with 'ulimit -n') 2015.04.24 10:08:31 LOG6[547326662:2071228096]: poll() used - no FD_SETSIZE limit for file descriptors 2015.04.24 10:08:31 LOG5[547326662:2071228096]: 250 clients allowed 2015.04.24 10:08:31 LOG7[547326662:2071228096]: FD 5 in non-blocking mode 2015.04.24 10:08:31 LOG7[547326662:2071228096]: FD 4 in non-blocking mode 2015.04.24 10:08:31 LOG7[547326662:2071228096]: FD 6 in non-blocking mode 2015.04.24 10:08:31 LOG7[547326662:2071228096]: SO_REUSEADDR option set on accept socket 2015.04.24 10:08:31 LOG7[547326662:2071228096]: telnet bound to 0.0.0.0: 2015.04.24 10:15:00 LOG3[547326662:2071228096]: Received signal 2; terminating 2015.04.24 10:18:18 LOG5[547326662:2071228096]: stunnel undefined on vax-openvms with OpenSSL 0.9.8h 28 May 2008 2015.04.24 10:18:18 LOG5[547326662:2071228096]: Threading:PTHREAD Sockets:POLL,IPv4 2015.04.24 10:18:18 LOG6[547326662:2071228096]: file ulimit = 512 (can be changed with 'ulimit -n') 2015.04.24 10:18:18 LOG6[547326662:2071228096]: poll() used - no FD_SETSIZE limit for file descriptors 2015.04.24 10:18:18 LOG5[547326662:2071228096]: 250 clients allowed 2015.04.24 10:18:18 LOG7[547326662:2071228096]: FD 5 in non-blocking mode 2015.04.24 10:18:18 LOG7[547326662:2071228096]: FD 4 in non-blocking mode 2015.04.24 10:18:18 LOG7[547326662:2071228096]: FD 6 in non-blocking mode 2015.04.24 10:18:18 LOG7[547326662:2071228096]: SO_REUSEADDR option set on accept socket 2015.04.24 10:18:19 LOG7[547326662:2071228096]: telnet bound to 0.0.0.0: 2015.04.24 10:21:08 LOG6[547326662:2071228096]: going to accept mode 2015.04.24 10:21:08 LOG7[547326662:2071228096]: telnet accepted FD=7 from 192.168.20.140:59281 2015.04.24 10:21:08 LOG6[547326662:2071228096]: accepted connection 2015.04.24 10:21:08 LOG7[547326662:8966656]: telnet started 2015.04.24 10:21:08 LOG7[547326662:8966656]: FD 7 in non-blocking mode 2015.04.24 10:21:08 LOG7[547326662:8966656]: TCP_NODELAY option set on local socket 2015.04.24 10:21:08 LOG5[547326662:8966656]: telnet accepted connection from 0.0.0.0: 2015.04.24 10:21:08 LOG7[547326662:8966656]: SSL state (accept): before/accept initialization 2015.04.24 10:21:30 LOG3[547326662:8966656]: SSL_accept: Peer suddenly disconnected 2015.04.24 10:21:30 LOG5[547326662:8966656]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2015.04.24 10:21:30 LOG7[547326662:8966656]: telnet finished (0 left) 2015.04.24 10:21:31 LOG6[547326662:2071228096]: going to accept mode 2015.04.24 10:21:31 LOG7[547326662:2071228096]: telnet accepted FD=7 from 192.168.20.140:59283 2015.04.24 10:21:31 LOG6[547326662:2071228096]: accepted connection 2015.04.24 10:21:31 LOG7[547326662:8966656]: telnet started 2015.04.24 10:21:31 LOG7[547326662:8966656]: FD 7 in non-blocking mode 2015.04.24 10:21:31 LOG7[547326662:8966656]: TCP_NODELAY option set on local socket 2015.04.24 10:21:31 LOG5[547326662:8966656]: telnet accepted connection from 0.0.0.0: 2015.04.24 10:21:31 LOG7[547326662:8966656]: SSL state (accept): before/accept initialization 2015.04.24 10:21:32 LOG3[547326662:8966656]: SSL_accept: Peer suddenly disconnected 2015.04.24 10:21:32 LOG5[547326662:8966656]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2015.04.24 10:21:32 LOG7[547326662:8966656]: telnet finished (0 left) 2015.04.24 10:21:33 LOG6[547326662:2071228096]: going to accept mode 2015.04.24 10:21:33 LOG7[547326662:2071228096]: telnet accepted FD=7 from 192.168.20.140:59284 2015.04.24 10:21:33 LOG6[547326662:2071228096]: accepted connection 2015.04.24 10:21:33 LOG7[547326662:8966656]: telnet started 2015.04.24 10:21:33 LOG7[547326662:8966656]: FD 7 in non-blocking mode 2015.04.24 10:21:33 LOG7[547326662:8966656]: TCP_NODELAY option set on local socket 2015.04.24 10:21:33 LOG5[547326662:8966656]: telnet accepted connection from 0.0.0.0: 2015.04.24 10:21:33 LOG7[547326662:8966656]: SSL state (accept): before/accept initialization 2015.04.24 10:21:34 LOG3[547326662:8966656]: SSL_accept: Peer suddenly disconnected 2015.04.24 10:21:34 LOG5[547326662:8966656]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2015.04.24 10:21:34 LOG7[547326662:8966656]: telnet finished (0 left) Paul J Coviello Senior System Administrator CCS Corporate Headquarters Two Wells Avenue, Newton, MA 02459 617.965.2000, Ext. 4004 [cid:[email protected]] [cid:[email protected]] CCS Commercial, LLC | CCS Resources, Inc. | ClaimAssist, LLC | Credit Control Services, Inc. Customer Contact Solutions, LLC | Enterprise Associates, LLC

2 4

Fwd: Comments/questions to Debian patches
by Michal Trojnara 24 Apr '15

24 Apr '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dear Users, Peter Pentchev, the Debian package maintainer for the "stunnel4" package, does not reply to my emails. I hope he is still alive and well, just too busy to maintain the package. I decided to share with you my comments to the patches that are applied to the Debian package. Hopefully, someone will find them useful. Mike - -------- Forwarded Message -------- Subject: Comments/questions to Debian patches Date: Tue, 28 Oct 2014 21:13:25 +0100 From: Michal Trojnara <Michal.Trojnara(a)mirt.net> To: Peter Pentchev <roam(a)ringlet.net> Hi Peter, Just a few comments/questions to improve the quality of Debian package. I'll be glad to discuss if you disagree with my opinions. 01-fix-paths.patch The patch description is quite outdated. Translation from sbin to bin was performed upstream in stunnel 4.21 released 27 Oct 2007. 8-) I guess: /usr/bin/stunnel -fd 10 \ should be: /usr/bin/stunnel4 -fd 10 \ Probably this should be added to the next patch: 02-rename-binary.patch 05-logrotate-warning-in-sample-conf.patch Good idea. I'll add it to stunnel 5.07. 08-client-example.patch I've already added this example in stunnel 5.02. Your patch adds it once again. Just remove it. 10-no-zlib-compression.patch I'm completely confused by this patch. According to my tests it only makes stunnel reporting different errors when a user tries to enable compression on Debian. Why would anyone need this patch? 11-no-rle-compression.patch IMHO OpenSSL bugs should be fixed in OpenSSL, and not in stunnel. YMMV 12-restore-pidfile-default.patch I strongly disagree with this approach, as it breaks configuration file compatibility with the upstream. Debian should instead rewrite stunnel.conf when upgrading from stunnel 4.xx. 14-lsb-init-functions.patch 8-) 15-upstream-systemd-libs.patch This (and more) will be included in stunnel 5.07. 16-upstream-sslv23-method.patch This will be included in stunnel 5.07. Mike -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJVNsCAAAoJEC78f/DUFuAUpfUP/j13koMgtnVLfsACIqUEaZw3 1uADOP/Dugqbn/QcwSqWAlcTrf7So98AQrB88xAhN8C3fwP375GmcNmPgJx4RRme fU/Wo0aFaCq0JOReiQkNiyj3pqf+J2NxZlZM5ZpzzpA80x8AlyLqBwPfBAtxgYNJ rb5AyIoGPkzfXM8OSz8YJXZtgXT4lrSCE5djlWHHBqy9ioUZCEuyVXeT5Y90sXOg wOA/EX3fTKEJZckoiNoTPAh9pLZ9M29lLM7wLEu5BFWwh/TtHk0ZFADo3Kzi/+4G Q6h9236DmH1NHA/FzMfFbKEYz/0yeOUMfet8LsRNNRRrFJEp+miMemSYajGMA3IT UVW4UNOa+CppVgkRpVMGfl/Lw53GP63xbLIRuZs17py03hNBHz2pyZneWWKTJEun xJQC4QJ3Z3YYXd71jpHIKjcDBXmIzcG8Z9QylaTywk8MBBBpjuRTXkIAlWWj2Iyk LVRsAgtooUKlQzUoAoseRygDv+Wbp/qVNL1Zogy7PmfORmqZOz08jRpDlXFgjPjR evGztgApTR+FSMO9f052z/Sql0chb5mhtdAtdBKpRE3CgtIrCHfcalSOyeCleHJK NMEbqfed9Oq2WA0/W89ilGtJWRH4v0GnYCfbYhbSoXp9DytdHPbhRUsiJL8LO34b 1cuMSsQ9LjF+3WyRie4m =SrZs -----END PGP SIGNATURE-----

2 2

Redis with stunnel, need to reset a client connection if the remote server drops
by Cocytus 20 Apr '15

20 Apr '15

Hello all, I've spent some time digging through the archives, but have yet to turn up a solution to the issue I'm having. We're using Redis instances on 'cloud' resources, and have successfully gotten stunnel setup as a server on these nodes. Additionally an internal process runs and connects to a local stunnel client that then connects to the remote cloud instance. This is working well enough at the moment, however there is one issue I'm bumping into. If the remote EC2 node goes dark for a bit (ie: reboot), the local stunnel client will reconnect, however the internal process which is establishing its connection to the local stunnel client does not get disconnected and therefore doesn't know that redis became unavailable and needs to re-subscribe to the redis stream. I need to invalidate the established session when the remote reconnects. Can this be accomplished with either a TIMEOUT value or session statement? Below is a sample of the configuration: ########### [some-ec2-node.com] client = yes verify = 2 CApath = /etc/ssl/certs sslVersion = TLSv1 accept = 127.0.0.1:10008 connect = some-ec2-node.com:6379 ########### $ stunnel4 -version stunnel 4.53 on x86_64-pc-linux-gnu platform Compiled with OpenSSL 1.0.1e 11 Feb 2013 Running with OpenSSL 1.0.1f 6 Jan 2014 Update OpenSSL shared libraries or rebuild stunnel Threading:PTHREAD SSL:+ENGINE+OCSP Auth:LIBWRAP Sockets:POLL+IPv6 Global options: debug = daemon.notice pid = /var/run/stunnel4.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options: ciphers = ALL:!SSLv2:!aNULL:!EXP:!LOW:-MEDIUM:RC4:+HIGH curve = prime256v1 session = 300 seconds sslVersion = TLSv1 for client, all for server stack = 65536 bytes TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none -- Josh

2 1

stunnel 5.16 release
by Michal Trojnara 19 Apr '15

19 Apr '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dear Users, I have released version 5.16 of stunnel. This release only fixes a compilation issue with old versions of gcc. The Win32/Android binaries are basically the same as for version 5.15. The ChangeLog entry: Version 5.16, 2015.04.19, urgency: MEDIUM: * Bugfixes - Fixed compilation with old versions of gcc. Home page: https://www.stunnel.org/ Download: https://www.stunnel.org/downloads.html SHA-256 hashes: b6b7e93fb2626eaabae1c8474e1dfa23962cfde8fa35c8602289fcaa4f53608d stunnel-5.16.tar.gz a701e6421c3020cc832ecb0e3a897c427a3838e0e180999ed8d905a9283fbb97 stunnel-5.16-installer.exe 2e559cc300b678fb2d05c2d2d3dc13d16cb44915f0165bea6290f741fccaa54c stunnel-5.16-android.zip Best regards, Mike -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAEBAgAGBQJVM7KGAAoJEC78f/DUFuAUWwoQAJUnjUpyNLhjUQxRwScKjgNx AJ5OPZHXwVjX+xvtSSOjlkK/pk5l4SaEbNtq6hwMGliDpowXXDGXeYwNbmACXGuM sZWzdTUC69WKLQcwfTmn5BmsPQtczaCDQdyBVGSII4qg0mFIU4e1GYT0t8od7OcU n17nnRCLEaS2xlDwR5ImMuRjD+BdpEgZdiRXqtJkyjX8+aSRsEtSVjDBJ5wtsYNN 9pyMp8xU+7+sxX5GiLQ8+IcqcUq+W53nMJQZmN5vQ8O2ShxuBeZYdvembPhybvlE NrnfmjvDtl6A0iFs8ZhRRPTJZTKqj88UGhn49g3eQBH+CbNK08GalWCwR/uX8yFb +Z801mNIxJQrPnSlSaWLDPGNQ9GBqxliui1IR+Biv1KpmcPWBDAOI+Y7Hqyy1/5r MUDT9GB4HLZTC6aWtR0IyG30w3CvUmNr+sENu91ewvl0I1Z04yWyK+wQ3L3CbWyk aVBaNmt09pR8zgU9nvw8aAE2MLJ5oCgoangGpO6rEL0frh7TZhzD9sOMMVefKZDY rPPApyOiphH+3nnh9EiM357S9saXJMFe8/gNh6+lNXmYJ0ngMcPybz9mNV+RbbZU P1itA5RYBAwDTEJcpvATEj8ni9YPdDdFVmMrvC7ay5KZo0HWHxH23ryShBN9XYjC diuX4vtV2LMVYV5dlmAj =Eer2 -----END PGP SIGNATURE-----

1 0

Rewriting HTTP host header
by Veit Guna 19 Apr '15

19 Apr '15

Hi. After disabling SSLv3 I've got the same problem as: https://www.stunnel.org/pipermail/stunnel-users/2014-October/004814.html Sadly, he never got an answer. So I ask again, is it possible that stunnel could set the HTTP Host header to match the "connect = " setting? This way, Apache would accept that request instead of returning BAD REQUEST with AH02032. Thanks Veit

2 1

openvms and stunnel
by Coviello, Paul 17 Apr '15

17 Apr '15

Hello I'm trying to setup stunnel 4.20 yes it is an old version but the only one on HP's website for VMS. I need a little help in the conf files. Since I will be using telnet, do I need to put in each machines ip address that will be connecting? So in the example below do I create a listing of connects? [telnet] accept = 999 connect = 192.168.0.1:993 Thanks Paul Paul J Coviello Senior System Administrator CCS Corporate Headquarters Two Wells Avenue, Newton, MA 02459 617.965.2000, Ext. 4004 [cid:[email protected]] [cid:[email protected]] CCS Commercial, LLC | CCS Resources, Inc. | ClaimAssist, LLC | Credit Control Services, Inc. Customer Contact Solutions, LLC | Enterprise Associates, LLC

4 21

stunnel 5.15 release
by Michal Trojnara 16 Apr '15

16 Apr '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dear Users, I have released version 5.15 of stunnel. The ChangeLog entry: Version 5.15, 2015.04.16, urgency: LOW: * New features - Added new service-level options "checkHost", "checkEmail" and "checkIP" for additional checks of the peer certificate subject. These options require OpenSSL version 1.0.2 or higher. - Win32 binary distribution now ships with the Mozilla root CA bundle. This bundle is intended be used together with the new "checkHost" option to validate server certs accepted by Mozilla. - New commandline options "-reload" to reload the configuration file and "-reopen" to reopen the log file of stunnel running as a Windows service (thx to Marc McLaughlin). - Added session persistence based on negotiated TLS sessions. https://en.wikipedia.org/wiki/Load_balancing_%28computing%29#Persistence The current implementation does not support external TLS session caching with sessiond. - MEDIUM ciphers (currently SEED and RC4) are removed from the default cipher list. - The "redirect" option was improved to not only redirect sessions established with an untrusted certificate, but also sessions established without a client certificate. - OpenSSL version checking modified to distinguish FIPS and non-FIPS builds. - Improved compatibility with the current OpenSSL 1.1.0-dev tree. - Removed support for OpenSSL versions older than 0.9.7. The final update for the OpenSSL 0.9.6 branch was 17 Mar 2004. - "sessiond" support improved to also work in OpenSSL 0.9.7. - Randomize the initial value of the round-robin counter. - New stunnel.conf templates are provided for Windows and Unix. * Bugfixes - Fixed compilation against old versions of OpenSSL. - Fixed memory leaks in certificate verification. Home page: https://www.stunnel.org/ Download: https://www.stunnel.org/downloads.html SHA-256 hashes: 58ff4645eb5d6bd64e6ddedaa683534302f75625c531e8a6364badcac0541cba stunnel-5.15.tar.gz 08316dc39f72f10f7b28a67e25ddf90f3f189208b09562c12d81478c6ca2e782 stunnel-5.15-installer.exe db96edbe66f1c3524e51f21b47cc541953d1659e746765a43d0272cfe60712b0 stunnel-5.15-android.zip Best regards, Mike -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAEBAgAGBQJVL7wqAAoJEC78f/DUFuAU+30P/Ar197tSUJC0+sLBXwddWkm4 J7d9lFThQFECDDSIqaFYfCuecIgGHk8LUVq8nQHh21H1tvpPp7SnYHkzOLsb2w/y G7rLdA+a8BgRTUF3rMxTyghL78Yor88OLI8J93U7pkQkl0bIZpiITn838R5x9/NP +nGTgqy3U5tNoXALBQ/tLZCNML/XaEyxfrbdStOslV5Ay3m23RPw9wqgD4tJoWqe 5x52sMmLh0nhE5lX3xAKxzabVcioAaqVlBEgK1/ZKJj709Olcv14HZcOWzWhWkka MR0ItrZMkYf3lLk/StDm3s2BakKRraRustxlK8wAV4ci7t/IBnWshIpYIij9Nzct HNOT10GjWpN6pwwixNcMBUn7/wDNjiRVw/1n/keL84qSYry54Czo1LpBra1lMCmg 8WENkpJbaNFHvXI4rEzZkiPdlG16tXHF33CcYxwrT8bCXa+Uk4i8c98TJ2jfOaUv VFVLWxFtK4ydoppgOo2eRuymVPNK4HbLZnLPL874xPlHpYjRl5ndClLeDpkDzgJv 8y6zdYwJLFbinWGGHTZIVlyQQfKzB1NDCfXxknsbxtCpZt5Ja0Ka+oS6kcOMZz6f CjYpmd52wjEtAoxxxsjGGrYsO3q0sn0UU3Kc97lGGS/MsgbXFYDnSGqP+p8lzDoq urHG9EjMxXNMcnmKp9JQ =XLyZ -----END PGP SIGNATURE-----

1 0

Re: [stunnel-users] Understanding communication
by josealf＠rocketmail.com 16 Apr '15

16 Apr '15

Claudia, Yes, to create a tunnel you need to configure stunnel on both sides, except in those cases when one of the extremes already supports TLS. Looks like yours is not one of those cases. Regards, Jose -----Original Message----- From: "Claudia Porta" <claudia.porta(a)bancaakros.it> Sender: "stunnel-users" <stunnel-users-bounces(a)stunnel.org> Date: Wed, 15 Apr 2015 14:51:07 To: <stunnel-users(a)stunnel.org> Subject: [stunnel-users] Understanding communication _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

1 0

Verifying TLS authentication via stunnel logs
by shanmuganathan sedukumar 16 Apr '15

16 Apr '15

We have a requirement to send emails via a SMTP server which requires TLS authentication. Going through some logs we tried changing the parameter "SSLversion = TLSv1", but still getting authentication failure. So, we would like to verify if stunnel is trying to sending request via TLS method before looking for any issues at SMTP end. Is there a way we can verify from stunnel logs if the request is sent via TLS? Thanks & Regards,Shanmu

1 0

Session is active but I cannot connect
by daninho dj 09 Apr '15

09 Apr '15

Hi guys, I am struggling with a problem for some time. I searched about this problem in the stunnel mails archives and also on Google but couldn't find a solution and I ran out of ideas so I was thinking to write you about it. I am using Eclipse to access and manipulate the data from a linux server. I want to use stunnel when I connect to the server via Eclipse, so I installed and configured everything as it follows: The server I am using is SuSE Linux and the stunnel version which I installed is this one: *stunnel 4.27 on x86_64-suse-linux-gnu with OpenSSL 0.9.8j-fips 07 Jan 2009* The stunnel version on Windows 7 is: *stunnel version 5.10* In the conf file from linux (server) I have the following configuration for stunnel.conf: *client = no* *chroot = /var/lib/stunnel/* *setuid = root* *setgid = root* *pid = /var/run/stunnel.pid* *debug = 7* *output = /var/log/stunnel/stunnel.log* *cert = /etc/ssl/certs/stunnel.pem* *sslVersion = SSLv3* *[test]* *accept = 2404* *connect = 2406* In the conf file from windows (client) I have the following configuration in stunnel.conf: *debug = 7* *output = C:\Program Files (x86)\stunnel\stunnel.log* *cert = C:\Program Files (x86)\stunnel\stunnel.pem* *sslVersion = SSLv3* *[test]* *client = yes* *accept = 127.0.0.1:2404 <http://127.0.0.1:2404>* *connect = xx.xxx.xxx.xxx:2406* In the log I have this: 2015.04.09 13:48:04 LOG5[11060]: Configuration successful 2015.04.09 13:48:04 LOG7[11060]: Listening file descriptor created (FD=452) 2015.04.09 13:48:04 LOG7[11060]: Service [test] (FD=452) bound to 127.0.0.1:2404 2015.04.09 13:48:07 LOG7[11060]: Service [test] accepted (FD=496) from 127.0.0.1:56675 2015.04.09 13:48:07 LOG7[11060]: Creating a new thread 2015.04.09 13:48:07 LOG7[11060]: New thread created 2015.04.09 13:48:07 LOG7[2088]: Service [test] started 2015.04.09 13:48:07 LOG5[2088]: Service [test] accepted connection from 127.0.0.1:56675 2015.04.09 13:48:07 LOG6[2088]: s_connect: connecting xx.xxx.xxx.xxx:2406 2015.04.09 13:48:07 LOG7[2088]: s_connect: s_poll_wait xx.xxx.xxx.xxx:2406: waiting 10 seconds 2015.04.09 13:48:07 LOG5[2088]: s_connect: connected xx.xxx.xxx.xxx:2406 2015.04.09 13:48:07 LOG5[2088]: Service [test] connected remote server from 127.0.0.1:56676 2015.04.09 13:48:07 LOG7[2088]: Remote socket (FD=516) initialized 2015.04.09 13:48:07 LOG6[2088]: SNI: sending servername: *my_server_name* 2015.04.09 13:48:07 LOG7[2088]: SSL state (connect): before/connect initialization 2015.04.09 13:48:07 LOG7[2088]: SSL state (connect): SSLv3 write client hello A 2015.04.09 13:48:08 LOG3[2088]: SSL_connect: Peer suddenly disconnected 2015.04.09 13:48:08 LOG5[2088]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.04.09 13:48:08 LOG7[2088]: Remote socket (FD=516) closed 2015.04.09 13:48:08 LOG7[2088]: Local socket (FD=496) closed 2015.04.09 13:48:08 LOG7[2088]: Service [test] finished (0 left) Although in the stunnel log it's showing *s_connect: connected* I cannot connect at all. When I try to connect via port 2406, the stunnel icon shows that the server is idle and I have nothing in the log about it. When I try to connect via port 2404, the stunnel icon shows that the there are 2 active sessions but I cannot connect to the server. I tried switching the ports (2404 with 2406 and 2406 with 2404 in the stunnel.conf file) but stunnel doesn't even open in that case. Do you have any idea what might could be the problem and how could I solve it? Thanks in advance! Best Regards, Daninho --

3 6

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users