- stunnel-users - stunnel.org

Stunnel 4 Multiple Processes on Ubuntu 8.04
by Armen Ayvazian 19 May '08

19 May '08

Greetings. I'm running the stock stunnel 4.21 on Ubuntu 8.04 (version and configs listed below) as a stand-alone daemon to pass connections between ssl-enabled SMTP, POP3, and IMAP clients and their respective servers, which run on the same machine as stunnel. In previous instances of Stunnel (v4.15) I've managed to successfully get the daemon to switch to a non-root user and use only a single process. I now find, however, that I get 6 processes and 5 continue to run as root with only one (albeit the one listening on the specified sockets) switching down to the specified user. Does anyone have any idea why I both can't set uid/gid and why I've now got so many processes? # ps aux | grep stunnel root 22702 0.0 0.1 3604 428 pts/1 S 11:24 0:00 /usr/bin/stunnel4 /etc/stunnel/stunnel.conf root 22703 0.0 0.1 3604 428 pts/1 S 11:24 0:00 /usr/bin/stunnel4 /etc/stunnel/stunnel.conf root 22704 0.0 0.1 3604 428 pts/1 S 11:24 0:00 /usr/bin/stunnel4 /etc/stunnel/stunnel.conf root 22705 0.0 0.1 3604 428 pts/1 S 11:24 0:00 /usr/bin/stunnel4 /etc/stunnel/stunnel.conf root 22706 0.0 0.1 3604 428 pts/1 S 11:24 0:00 /usr/bin/stunnel4 /etc/stunnel/stunnel.conf stunnel4 22707 0.0 0.2 3720 932 ? Ss 11:24 0:00 /usr/bin/stunnel4 /etc/stunnel/stunnel.conf # lsof -i | grep stunnel stunnel4 22707 stunnel4 11u IPv4 55934 TCP emily:pop3s (LISTEN) stunnel4 22707 stunnel4 12u IPv4 55935 TCP emily:imaps (LISTEN) stunnel4 22707 stunnel4 13u IPv4 55936 TCP emily:ssmtp (LISTEN) I'm invoking stunnel simply as /usr/sbin/stunnel4 /etc/stunnel4/stunnel.conf: cert = /etc/stunnel/stunnel.pem sslVersion = SSLv3 chroot = /var/lib/stunnel4/ setuid = stunnel4 setgid = stunnel4 pid = /stunnel4.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [pop3s] accept = 64.5.53.172:995 connect = 64.5.53.172:110 [imaps] accept = 64.5.53.172:993 connect = 64.5.53.172:143 [ssmtp] accept = 64.5.53.172:465 connect = 64.5.53.172:25 Version Info: stunnel 4.21 on i486-pc-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /var/run/stunnel4.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = /etc/stunnel/stunnel.pem session = 300 seconds sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none

1 0

stunnel and OCSP verification: strange behaviour
by Andreas Ntaflos 19 May '08

19 May '08

Hi list, [My apologies, I accidentally tried to send this message to stunnel-announce earlier.] I have a quick question regarding the use of stunnel with verification against an OCSP responder. I am using stunnel 4.20 and (for testing) 4.23 but I don't see any difference in the behaviour of both. The main problem is that stunnel accepts and establishes connections from clients even if those clients had their certificates revoked and the OCSP responder correctly informs stunnel about it. Consider the following configuration: foreground = yes CAfile = /path/to/cacert.pem cert = /path/to/stunnel_cert.pem key = /path/to/stunnel_key.pem debug = 7 [clientauth] accept = localhost:43434 connect = localhost:43433 verify = 2 OCSP = http://localhost:43435 The OCSP responder runs on localhost:43435 as you can see. Client verification is enabled. Using openssl to manually check against the responder works fine: openssl ocsp -issuer cacert.pem -CAfile cacert.pem -url \ http://localhost:43435 -cert revoked_cert.pem Response verify OK /path/to/revoked_cert.pem: revoked This Update: May 15 15:38:46 2008 GMT Next Update: May 15 17:04:32 2008 GMT Revocation Time: May 15 15:38:26 2008 GMT The relevant portion of stunnel's debug output looks like this: [...] Starting OCSP verification FD 8 in non-blocking mode connect_wait: waiting 10 seconds connect_wait: connected OCSP server connected FD 8 in blocking mode FD 8 in non-blocking mode OCSP response received OCSP verification passed: status=0, reason=-1208427072 VERIFY OK: depth=1, /CN=The CA/C=AT/ST=SomeState/L=SomeCity/O=The \ Organisation/emailAddress=camaster(a)the-organisation.invalid Starting OCSP verification FD 8 in non-blocking mode connect_wait: waiting 10 seconds connect_wait: connected OCSP server connected FD 8 in blocking mode FD 8 in non-blocking mode OCSP response received OCSP verification passed: status=1, reason=-1 VERIFY OK: depth=0, /C=AT/ST=SomeState/O=The Organisation/CN=this is a \ revoked cert SSL state (accept): SSLv3 read client certificate A [...] As far as I can see the OCSP verification works fine here, too, and at depth 0 stunnel finds the certificate to have been revoked (status=1 indicates that, I believe). The connection, however, is not rejected. Is there any way to have stunnel reject the connection when the client certificate has been revoked? Where would I configure this? The only way I have found yet was to patch src/verify.c but surely there must be a more convenient approach to this? On a related matter: if stunnel cannot and will not reject the connection upon a negative response from the OCSP, what would be the best way to script stunnel so that it rejects such a connection? I am asking because I am in the process of writing a few Python scripts that incorporate stunnel to aid in testing of some SSL-speaking components. Such a client component without a valid, non-revoked certificate must not be able to connect. I mean what good is OCSP verification if the result of the process, i.e. the responders answer "the certificate is valid" or "the certificate is no longer valid" doesn't matter to stunnel? Am I missing the point somewhere? I'd appreciate any insights on this. Kind regards, Andreas -- Andreas "daff" Ntaflos Vienna, Austria GPG Fingerprint: 6234 2E8E 5C81 C6CB E5EC 7E65 397C E2A8 090C A9B4

2 2

Reg:IPV6 support on stunnel
by Sandhya 15 May '08

15 May '08

> Stunnel version: > stunnel 4.09 on armv5tejl-unknown-linux-gnu PTHREAD+POLL+IPv6+LIBWRAP with > OpenSSL 0.9.7e 25 Oct 2004 > > My conf file Information: > cert = /usr/local/www/certs/server.pem > key = /usr/local/www/certs/privkey-server.pem > pid = /var/run/stunnel_kvm.pid > client = no > socket = l:TCP_NODELAY=1 > socket = r:TCP_NODELAY=1 > socket = a:TCP_NODELAY=1 > [ms] > accept = 1234 > connect = 1236 > > Please find the Config.log file attached. > > Please let me know if any other information is needed or you want me try > some commands on stunnel. > > Thanks for the help > > Sandhya R > > ----- Original Message ----- > From: "Michal Trojnara" <Michal.Trojnara(a)mobi-com.net> > To: <stunnel-users(a)mirt.net> > Sent: Wednesday, May 14, 2008 7:06 PM > Subject: Re: [stunnel-users] Reg:IPV6 support on stunnel > > >> >> Sandhya wrote: >> >>> I have enabled IPV6 ip When my client tries to connect to my ipv6 ip and >>> the port(stunnel listens) where my it is listening...Its failed to >>> connect. >> >> Please send us: >> - the output of "stunnel -version", >> - your stunnel.conf file, >> - your debug level logs. >> >> Best regards, >> Mike >> >> _______________________________________________ >> stunnel-users mailing list >> stunnel-users(a)mirt.net >> http://stunnel.mirt.net/mailman/listinfo/stunnel-users >> >

1 1

Fw: Reg:IPV6 support on stunnel
by Sandhya 14 May '08

14 May '08

----- Original Message ----- From: Sandhya To: stunnel-users(a)mirt.net Sent: Wednesday, May 14, 2008 6:43 PM Subject: [stunnel-users] Reg:IPV6 support on stunnel Hi, I am newbie to stunnel.As mentioned in some of your posts i just gone through ..how to enable ipv6 support. While configuring i did the same by giving the following command. ./configure --enable-ipv6 make make install and i ran stunnel which listens at some port and i have my own server which listens for stunnel. I have enabled IPV6 ip When my client tries to connect to my ipv6 ip and the port(stunnel listens) where my it is listening...Its failed to connect. Could you please throw some light on how to enable IPV6 support for stunnel apart from what i tried. Thanks in advance Sandhya -------------------------------------------------------------------------------- _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users

1 0

Reg:IPV6 support on stunnel
by Sandhya 14 May '08

14 May '08

Hi, I am newbie to stunnel.As mentioned in some of your posts i just gone through ..how to enable ipv6 support. While configuring i did the same by giving the following command. ./configure --enable-ipv6 make make install and i ran stunnel which listens at some port and i have my own server which listens for stunnel. I have enabled IPV6 ip When my client tries to connect to my ipv6 ip and the port(stunnel listens) where my it is listening...Its failed to connect. Could you please throw some light on how to enable IPV6 support for stunnel apart from what i tried. Thanks in advance Sandhya

1 0

Reg:IPV6 support on stunnel
by Sandhya 13 May '08

13 May '08

Hi, I am newbie to stunnel.As mentioned in some of your posts i just gone through ..how to enable ipv6 support. While configuring i did the same by giving the following command. ./configure --enable-ipv6 make make install and i ran stunnel which listens at some port and i have my own server which listens for stunnel. I have enabled IPV6 ip When my client tries to connect to my ipv6 ip and the port(stunnel listens) where my it is listening...Its failed to connect. Could you please throw some light on how to enable IPV6 support for stunnel apart from what i tried. Thanks in advance Sandhya

1 0

Re: [stunnel-users] HTTPS connections aborted
by Matthias Kellermann 09 May '08

09 May '08

Hi Aleksandar, Aleksandar Lazic wrote: > The timing events at 6st position. > > http://haproxy.1wt.eu/download/1.3/doc/haproxy-en.txt > > > --- > 4.2.3) Timing events > -------------------- > . > . > . > > Other cases ('xx' means any value to be ignored) : > -1/xx/xx/xx/Tt: the client was not able to send its complete request > in time, > or that it aborted it too early. > Tq/-1/xx/xx/Tt: it was not possible to process the request, maybe because > servers were out of order. > Tq/Tw/-1/xx/Tt: the connection could not establish on the server. > Either it > refused it or it timed out after Tt-(Tq+Tw) ms. > Tq/Tw/Tc/-1/Tt: the server has accepted the connection but did not > return a > complete response in time, or it closed its connexion > unexpectedly, after Tt-(Tq+Tw+Tc) ms. thanks, I'll have a look at it. -Matthias

1 0

Feature request - verify fall-back
by Sudhaker Raj 09 May '08

09 May '08

Hi Team, I wish to use stunnel for following use-case (to create a highly-protected website which can be accessed only using a valid client-cert). gateway.example.com:443 -> public.example.com:80 (when client-cert verification fails) gateway.example.com:443 -> intranet.example.com:80 (when client-cert verification ok - normally hidden from public) As of now stunnel simply drops the connection when service is configured to verify the client certificate and verification fails. Is it possible to add a fall-back connect when verification fails. [protected-web] verify=3 accept=443 connect=intranet.example.com:80 noverify=public.example.com:80 I guess it will be a nice addition to stunnel's feature list. Thanks, Sudhaker

3 3

launch stunnel server daemon from php?
by Wesley Kenzie 06 May '08

06 May '08

I am having problems launching stunnel from a php "exec" command. I would like to have it launch as a server daemon and then have the exec command return control to the php script. The best I have been able to do is launch it in foreground with a command like "/usr/local/bin/stunnel /etc/stunnel/test.conf &" but control never returns to the php script. I do not want to use inetd mode, and would prefer to specify command line arguments, but I see they are no longer available in version 4. Any ideas? . . . . . Wesley Kenzie wkenzie(a)gmail.com

2 2

HTTPS connections aborted
by Matthias Kellermann 05 May '08

05 May '08

Hi list, I've set up a loadbalancer with haproxy and I'm using stunnel to have HTTPS on the loadbalancer. Every connection on port 443 is forwarded by stunnel to port 80 where haproxy listens. Some facts: FreeBSD 6.2 i386 stunnel 4.22 OpenSSL 0.9.7e-p1 gcc version 3.4.6 [FreeBSD] 20060305 Here is my stunnel.conf: sslVersion = all chroot = /var/tmp/stunnel setuid = stunnel setgid = nogroup pid = /stunnel.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 3 [https] cert = /usr/local/etc/stunnel/ssl/mycert.pem accept=localip:443 connect=localip:80 Some of my customers using HTTPS are claiming about aborted connections with MS Internet Explorer. They get a message about "secure and unsecure objects on this site, proceed?". When clicking yes they get a IE error message: "site not found". (Sorry, I don't know the exact english error message because customers use german version of IE). Of course there are only HTTPS objects on the page. In my logs I've lot of these entries: SSL_accept: Peer suddenly disconnected From time to time I'll get this error: SSL_read: Connection reset by peer (54) or: SSL_read: Operation timed out (60) or: SSL_write: Broken pipe (32) At the moment I have no idea where these errors come from and if they really belong to the error the customer gets with his IE browser. Any ideas what could cause these error messages? Thanks in advance, Matthias

2 1

Stunnel <=> p2p
by mluft 05 May '08

05 May '08

Hi, i just started working with stunnel, and i'm really impressed! But i've got 2 questions: * How is it realized, that a setup like this: accept = 15000 connect = 16000 also encrypts the reply of the app which listens on port 16000? Is there a kind of masquerading? * I think of a tool like tsocks or socksify: "tsocks application" redirects all traffic from application over an socks proxy. Is it possible to realize such a redirection with stunnel? So that all outgoing traffic of an application gets encrypted? I know that i can build point-to-point tunnels, but that's not possible for my scenario... Thanks & Cheers, Matthias

1 0

Stunnel 4.23 xforwardfor patch
by Rene Plattner 05 May '08

05 May '08

Dear stunnel users! I noticed that the xforwardfor patch does not work any more on version > 4.20! This is due an function renaming in stunnel! After adding xforwardfor patch for version 4.20 see options.c: Simply replace log_raw(...); to s_log(LOG_RAW,...); chears, -- Dipl.-Ing. Rene' Plattner Zentraler Informatikdienst (ZID) Universität Innsbruck, Österreich Technikerstr. 13 A-6020 Innsbruck Tel: ++43512/507-2360 Fax: ++43512/507-2944

1 0

Can stunnel be configured to listen for multiple IP addresses and access different email hosts?
by F Boyd Crow 04 May '08

04 May '08

I have attempted to use stunnel to retrieve POP3 SSL mail from two different ISPs: pop.att.yahoo.com and pop.gmail.com. I have tried putting in separate Access/Connect line pairs under [pop3s] either point to the different ports on 127.0.0.1 whch is an Exchange Server 2003 machine. I have tried pointing both to the same port. In either case, the first POP3 host is accessed but not the second. I have also tried one Access line and two separate connects. It works fine with one Access line and one Connect line but a previous post on this subject indicated I should be able to do retrievals from two separate sites and I do not see how. I am using the POP3 Connection Manager on Small Business Server 2003. I set the email server to 127.0.0.1 and use port 9995. The corresponding section of the stunnel.conf file is client = yes debug = 7 ; Service-level configuration [pop3s] accept = 9995 connect = pop.gmail.com:995 ;does not work with two separate pop3s, either with two separate accept ports or one common final comment is my own. Has anyone successfully accessed mail from two POP3 servers through stunnel or have any suggestions? Boyd

1 0

stunnel 4.23 released
by Michal Trojnara 03 May '08

03 May '08

Dear Users, I have just released a new version of stunnel. Please find below the ChangeLog entry: Version 4.23, 2008.05.03, urgency: HIGH: * Bugfixes - Local privilege escalation bug on Windows NT based systems fixed. A local user could exploit stunnel running as a service to gain localsystem privileges. Home page/download: http://stunnel.mirt.net/ sha1sum for stunnel-4.23.tar.gz file: d0fef8b518a44b9623692381a53680e0b4b01686 Best regards, Mike

1 0

Re: [stunnel-users] launch stunnel server daemon from php?
by Wesley Kenzie 03 May '08

03 May '08

No, that does not work either. I can get stunnel to start fine outside of php, but not as an exec or shell_exec from within a running script, or even from within php -a interactively. I can get other programs to work fine this way, so it is specific to the stunnel executable as best I can tell. I have tried running various forms of bash scripts too, but none do any better. Ideas? . . . . . Wesley On Fri, May 2, 2008 at 12:52 PM, Ludolf Holzheid < lholzheid(a)bihl-wiedemann.de> wrote: > On Fri, 2008-05-02 12:32:19 -0700, Wesley Kenzie wrote: > > Yes. Without this stunnel would not launch. With foreground = no and > with > > the trailing & on the command line I got it to launch, but still control > > will not return to my php script ... > > > > . . . . . > > Wesley > > > > On Fri, May 2, 2008 at 12:29 PM, Ludolf Holzheid < > > lholzheid(a)bihl-wiedemann.de> wrote: > > > > > On Fri, 2008-05-02 12:19:38 -0700, Wesley Kenzie wrote: > > > > I am having problems launching stunnel from a php "exec" command. I > > > would > > > > like to have it launch as a server daemon and then have the exec > command > > > > return control to the php script. > > > > > > Did you try to specify ``foreground = no'' in the configuration file? > > Wesley, > > I must confess that I don't know php and its `exec' command. There > must be something special about it. > > I would try to start a shell, which starts stunnel, which, in turn, > detaches itself to the background (i.e. something like "/bin/sh -c > '/usr/local/bin/stunnel /etc/stunnel/test.conf'"). So that the process > started by `exec' finishes and hopefully control returns to php. > > hth, > > Ludolf > > -- > > A: Because it messes up the order in which people normally read text. > Q: Why is top-posting such a bad thing? > A: Top-posting. > Q: What is the most annoying thing in e-mail? >

1 0

Re: [stunnel-users] launch stunnel server daemon from php?
by Wesley Kenzie 02 May '08

02 May '08

Yes. Without this stunnel would not launch. With foreground = no and with the trailing & on the command line I got it to launch, but still control will not return to my php script ... . . . . . Wesley On Fri, May 2, 2008 at 12:29 PM, Ludolf Holzheid < lholzheid(a)bihl-wiedemann.de> wrote: > On Fri, 2008-05-02 12:19:38 -0700, Wesley Kenzie wrote: > > I am having problems launching stunnel from a php "exec" command. I > would > > like to have it launch as a server daemon and then have the exec command > > return control to the php script. > > Did you try to specify ``foreground = no'' in the configuration file? > > Ludolf > > -- > > --------------------------------------------------------------- > Ludolf Holzheid Tel: +49 621 339960 > Bihl+Wiedemann GmbH Fax: +49 621 3392239 > Floßwörthstraße 41 e-mail: lholzheid(a)bihl-wiedemann.de > D-68199 Mannheim, Germany > --------------------------------------------------------------- >

1 0

Verify=3 restart needed ?
by Edouard Dessioux 30 Apr '08

30 Apr '08

Hi everyone, Sorry for the repost, but in the web mailing list, my previous message appears weird, so I thought I could re-post it. I'm using stunnel v4.16 on a Windows 2003 Server, and I'm working with stunnel in verify=3 mode. I wanted to know if the stunnel needs to be restarted after a certificates has been removed ? If not, how long is the certificate considered valid after the file has been removed ? Regards, Edouard DESSIOUX Directeur de Projets Tibco Mobile 3, rue Danton - 92240 Malakoff Tél : +33 (0)1 55 58 04 59 - Fax : +33 (0)1 55 58 03 89 - Mob. +33 (0)6 34 02 61 54 E-mail : edessioux(a)tibco.fr - www.tibcomobile.fr Faites un geste pour la planète, n'imprimez ce message que si nécessaire.

3 3

to use certificate and key file in another machine
by Xiaoming Dong 29 Apr '08

29 Apr '08

Stunnel Version 4.2.1 Run in windows 2k3 When I configured stunnel to use cert from another windows machine (I already mapped the drive to this machine). Restarting stunnel got following error: 2008.04.29 10:01:32 LOG7[3568:1792]: Snagged 64 random bytes from C:/.rnd 2008.04.29 10:01:32 LOG7[3568:1792]: Wrote 1024 new random bytes to C:/.rnd 2008.04.29 10:01:32 LOG7[3568:1792]: RAND_status claims sufficient entropy for the PRNG 2008.04.29 10:01:32 LOG7[3568:1792]: PRNG seeded successfully 2008.04.29 10:01:32 LOG3[3568:1792]: V:\Program Files\client_cert\private\client_key.pem: No such process (3) 2008.04.29 10:01:32 LOG3[3568:1792]: Server is down Does anybody have any clue? Thanks, -Xiaoming ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

1 0

Will fwknop work?
by richard.woodman＠cox.net 29 Apr '08

29 Apr '08

If I understand the question correctly, isn't this what "port knocking" or single packet authorization (e.g. fwknop) is supposed to do? I have used fwknop and SSH in our lab, but only with Linux and iptables. However, I think fwknop is supposed to interface with more than just iptables on the local box (meaning you would not have to use a Linux box to replace your current firewall). I think you can use fwknop to monitor syslog and parse for specific events and then open the port. In other words, your current firewall reports to your syslog server and fwknop parses the log file for the security event associated with the reception of a SPA packet on your outside interface. Fwknop then sends your firewall (through a script?) whatever command is required to open the port you want and redirect it to the appropriate inside machine (or you could simply enable / disable a preconfigured rule). I am not a scripting guru so I may be WAY off base here and if I am, I apologize for leading you astray. Anyway, you might want to check out the following: http://cipherdyne.org/fwknop/ --> FireWall KNock Operator home page http://fwknop.darwinports.com/ --> OS X fwknop client There is also a Windows UI version that is supposed to create SPA packets without using fwknop / PERL or running under Cygwin but I have not used that. Richard On 4/29/08 7:50 PM, "jz(a)ellingtongeologic.com" <jz(a)ellingtongeologic.com> wrote: > > Good Morning Mike: > > I had a question and sent to the list (it might have not gone thru) The > question was that: is it possible for stunnel to go to the router, for > example, 10.10.1.1, to scan for a port of interest and see whether there is a > request thru that port? so the nat router would not have to forward the port > to the stunnel of my local machine, e.g. 10.10.1.188, on which stunnel is > listening for port 8888 and will relay it to 5631 of the local program. > > Thanks

1 0

how to enable TLS?
by Zhang Weiwu 26 Apr '08

26 Apr '08

Dear all I just configured stunnel for pop+ssl which works fine. What I want is actually smtp+tls. Is there a way to do so? I tried to configure thunderbird to access the port stunnel is listening to, with TLS. Then I got "Connectioin to xxx.xxx.xxx timed out". Best regards -- Real Softservice Huateng Tower, Unit 1788 Jia 302 3rd area of Jinsong, Chao Yang Tel: +86 (10) 8773 0650 ext 603 Mobile: 135 9950 2413 http://www.realss.com

1 0

Query regarding stunnel performance
by Arati.Kumar＠ubs.com 25 Apr '08

25 Apr '08

Hi, Does anyone know if there are any known issue with stunnel 4.05 and oracle 10g (especially in retrieving blobs) ? . Our application uses stunnel to communicate with oracle database. We are currently experiencing massive performance degradation after upgrading oracle from 9i to 10g (almost 6 times slower from what it was in 9i). Our application stores some data in blobs this seems to be the root cause of slower performance. Pls can someone let me know if there are any known issues with stunnel and 10g blob retrieving ? Also If an upgrade is recommended, which is the stable version we must be switching to? Thanks, Ararti Visit our website at http://www.ubs.com This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mails are not encrypted and cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. This message is provided for informational purposes and should not be construed as a solicitation or offer to buy or sell any securities or related financial instruments. UBS Limited is a company registered in England & Wales under company number 2035362, whose registered office is at 1 Finsbury Avenue, London, EC2M 2PP, United Kingdom. UBS AG (London Branch) is registered as a branch of a foreign company under number BR004507, whose registered office is at 1 Finsbury Avenue, London, EC2M 2PP, United Kingdom. UBS Clearing and Execution Services Limited is a company registered in England & Wales under company number 03123037, whose registered office is at 1 Finsbury Avenue, London, EC2M 2PP, United Kingdom.

1 0

Linux FIPS compile libary question
by Joe Kemp 23 Apr '08

23 Apr '08

I am compiling stunnel on Centos 5 that has a regular Openssl 0.9.8b rpm installed. I have put my FIPS openssl in /usr/local/sslfips112. Configure with: ./configure --with-ssl=/usr/local/sslfips112 --enable-fips --disable-libwrap Make's linker line: /bin/sh ../libtool --tag=CC --mode=link FIPSLD_CC=gcc /usr/local/sslfips112/bin/fipsld -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/usr/local/sslfips112/include -lldap -o stunnel file.o client.o log.o options.o protocol.o network.o resolver.o ssl.o ctx.o verify.o sthreads.o stunnel.o auth.o pty.o libwrap.o -lz -ldl -lutil -lnsl -lpthread -L/usr/local/sslfips112/lib -lssl -lcrypto FIPSLD_CC=gcc /usr/local/sslfips112/bin/fipsld -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/usr/local/sslfips112/include -o stunnel file.o client.o log.o options.o protocol.o network.o resolver.o ssl.o ctx.o verify.o sthreads.o stunnel.o auth.o pty.o libwrap.o -lldap -lz -ldl -lutil -lnsl -lpthread -L/usr/local/sslfips112/lib -lssl -lcrypto This builds a stunnel that seems to run fine. During startup it says "stunnel is in FIPS mode." But if I run "ldd stunnel" it shows it needs /lib/libssl.so.6. While stunnel is running lsof shows it has that library open also. Why does my FIPS stunnel build still use the 0.9.8b shared library? Shouldn't all of the ssl dependencies been handled by the static FIPS openssl library during linking? The same issue exists for libcrypt.

4 6

stunnel wildcard question
by neve_capricorn＠gmx.de 17 Apr '08

17 Apr '08

hi, iam pulling my hair out with an wildcard ssl certificate / stunnel configuration. i use stunnel 4.2.2 and latest openSSL release. i have a signed wildcard certificate from comodo. when i add the .crt, .key and .ca-bundle file into an apache configuration, everything work fine in firefox and ie. when i try to use stunnel with the same certificates i got problems in firefox when i disable ; Authentication stuff ; verify =1 and when i set verify=1 i got problems in IE .7 (a dialog box pops and ask for identification the certificates). can someone maybe help me out,please? a demo is here: https://ssl1.medialib.de (works fine in firefox) https://ssl1.medialib.de (problem in IE7) thank you very much & best gary

1 0

Verify=3 cache expiration
by Edouard Dessioux 16 Apr '08

16 Apr '08

Hi everyone, I'm using stunnel v4.16 on a Windows 2003 Server, and I'm working with stunnel in verify=3 mode. I wanted to know if the stunnel needs to be restarted after a certificates has been removed ? If not, how long is the cache expiration delay before being taken into account ? Regards, Edouard DESSIOUX Directeur de Projets Tibco Mobile 3, rue Danton - 92240 Malakoff Tél : +33 (0)1 55 58 04 59 - Fax : +33 (0)1 55 58 03 89 - Mob. +33 (0)6 34 02 61 54 E-mail : edessioux(a)tibco.fr - www.tibcomobile.fr Faites un geste pour la planète, n'imprimez ce message que si nécessaire.

1 0

SCM repo?
by Alberto Giménez 12 Apr '08

12 Apr '08

Hello, Is there any public SCM (SVN, GIT, whatever) repository? I haven't seen anything on the website and I'd like to try to implement a new feature. Thanks in advance. -- Alberto Giménez

2 1