- stunnel-users - stunnel.org

Access control/TCP wrappers
by Craig Watkinson 23 Feb '10

23 Feb '10

Hi, We're using stunnel to provide a secure interface to an old server that doesn't support HTTPS natively. I'd like to implement some access control so that connections are only supported from specific IP addresses. I am using v4.27 of stunnel that I downloaded from HPs website, and am running it from inittab to ensure it is always running. Unfortunately I don't think it's compiled with libwrap. Should I see libwrap listed when I run ldd against the binary (see below for output)? I think it's possible to run stunnel from inetd. Could I wrapper it here? Is the following entry correct? stunnel stream tcp nowait root /usr/lbin/tcpd /opt/iexpress/stunnel/bin/stunnel stunnel I think this would work, but I'm concerned that if stunnel was to crash or be killed that there would be nothing restarting it if we ran it from inetd. Any advice much appreciated Craig ------------------------------------- # ./stunnel -version stunnel 4.27 on ia64-hp-hpux11.23 with OpenSSL 0.9.7m 23 Feb 2007 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Global options debug = 5 pid = /opt/iexpress/stunnel/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /opt/iexpress/stunnel/etc/stunnel/stunnel.pem ciphers = ALL:!aNULL:!eNULL+RC4:@STRENGTH key = /opt/iexpress/stunnel/etc/stunnel/stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none # ldd ./stunnel libdl.so.1 => /usr/lib/hpux32/libdl.so.1 libnsl.so.1 => /usr/lib/hpux32/libnsl.so.1 libpthread.so.1 => /usr/lib/hpux32/libpthread.so.1 libunwind.so.1 => /usr/lib/hpux32/libunwind.so.1 libc.so.1 => /usr/lib/hpux32/libc.so.1 libxti.so.1 => /usr/lib/hpux32/libxti.so.1 libuca.so.1 => /usr/lib/hpux32/libuca.so.1 libdl.so.1 => /usr/lib/hpux32/libdl.so.1 _________________________________________________________________ Do you have a story that started on Hotmail? Tell us now http://clk.atdmt.com/UKM/go/195013117/direct/01/

2 2

4.26 and commercial certificate - Now working.
by Editor (Kevin) 20 Feb '10

20 Feb '10

Hi: Thanks. Everything is working now. > Message: 1 > Date: Wed, 17 Feb 2010 07:11:16 -0800 (PST) > From: Leandro Avila <leandro.avila(a)ymail.com> > Subject: Re: [stunnel-users] Small challenge with version 4.26 and a > commercial certificate > To: stunnel-users(a)mirt.net > Message-ID: <544640.49520.qm(a)web111011.mail.gq1.yahoo.com> > Content-Type: text/plain; charset=us-ascii > > Hi Kevin, > > I think there is ambiguous information about this. > The man page states that the private key should be unencrypted > However, the changelog states that the support for pass phrases was fixed in v4.20 > > I'll do some testing see what I can find. Or maybe someone can shed some light on the issue. > > Best regards > > ----------------- > Leandro Avila

1 0

Re: [stunnel-users] Make reports an error on Aix with stunnel-4.30
by Michal Trojnara 19 Feb '10

19 Feb '10

Derek Nicholls wrote: > gcc -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith > -I/opt/freeware/include -o stunnel file.o client.o log.o options.o > protocol.o network.o resolver.o ssl.o ctx.o verify.o sthreads.o stunnel.o > pty.o libwrap.o -lz -ldl -L/opt/freeware/lib -lssl -lcrypto > ld: 0711-317 ERROR: Undefined symbol: .SSL_CTX_set_info_callback > ld: 0711-317 ERROR: Undefined symbol: .SSL_CTX_sess_set_new_cb > ld: 0711-317 ERROR: Undefined symbol: .SSL_CTX_sess_set_get_cb > ld: 0711-317 ERROR: Undefined symbol: .SSL_CTX_sess_set_remove_cb > ld: 0711-317 ERROR: Undefined symbol: .BIO_set_flags > ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more > information. > collect2: ld returned 8 exit status > make: 1254-004 The error code from the last command is 1. What it means is that the linker has found on its path another version of libssl, older than your headers in /opt/freeware/include. Mike

1 0

Cert Chain Question
by Craig Kelley 18 Feb '10

18 Feb '10

I've been attempting to include an intermediate chain for my stunnel setup. First, I previously used an entrust-signed certificate with stunnel just fine, but now I've purchased one from godaddy ($190 for 3 certs for 5 years!). The only problem is that the server has multiple certificates to install. Under Apache, I solved it with this: SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key SSLCertificateChainFile /etc/httpd/conf/ssl.crt/godaddy.crt Which works just fine. With stunnel I attempted this configuration: cert = /etc/stunnel/server.crt key = /etc/stunnel/server.key CAfile = /etc/stunnel/godaddy.crt All those files are identical to the Apache configuration. Stunnel starts up, but clients loudly complain that the certificate is not valid. If I examine the certificate in Thunderbird (I use stunnel for IMAPS and POP3S), it correctly identifies the cert as being from GoDaddy and that it will expire in 2015. But for some reason, the chain to its root server is broken. What am I doing wrong? -- Craig Kelley http://inconnu.islug.org/~ink finger same server for PGP block

2 2

Small challenge with version 4.26 and a commercial certificate
by editor 17 Feb '10

17 Feb '10

Hi: I decided to spend the money and get a commercial certificate from Thawte. It was not a bad price. I have installed in the Sun host and while it works perfectly for Apache but I can not get the file to work for stunnel. The idea is to allow mobile users to access their mail without annoying certificate warnings. This is what happens: # /usr/local/bin/stunnel & [1] 13704 # Enter PEM pass phrase: 2010.02.14 05:32:46 LOG7[13704:1]: Snagged 64 random bytes from /export/home/kgreene/.rnd 2010.02.14 05:32:46 LOG7[13704:1]: Wrote 1024 new random bytes to /export/home/kgreene/.rnd 2010.02.14 05:32:46 LOG7[13704:1]: RAND_status claims sufficient entropy for the PRNG 2010.02.14 05:32:46 LOG7[13704:1]: PRNG seeded successfully 2010.02.14 05:32:46 LOG7[13704:1]: Certificate: /usr/local/etc/stunnel/stunnel.pem 2010.02.14 05:32:46 LOG7[13704:1]: Certificate loaded 2010.02.14 05:32:46 LOG7[13704:1]: Key file: /usr/local/etc/stunnel/stunnel.pem 2010.02.14 05:32:46 LOG3[13704:1]: error stack: 140B3009 : error:140B3009:SSL routines:SSL_CTX_use_RSAPrivateKey_file:PEM lib 2010.02.14 05:32:46 LOG3[13704:1]: error stack: 906A068 : error:0906A068:PEM routines:PEM_do_header:bad password read 2010.02.14 05:32:46 LOG3[13704:1]: SSL_CTX_use_RSAPrivateKey_file: 906406D: error:0906406D:PEM routines:PEM_def_callback:problems getting password [1]+ Exit 1 /usr/local/bin/stunnel # It never pauses to let me enter the PEM pass phase. As in instructed in the man pages, I created the pem file by merging the private key and the certificate from Thawte. This is the version statement: # /usr/local/bin/stunnel -version stunnel 4.26 on sparc-sun-solaris2.9 with OpenSSL 0.9.8l 5 Nov 2009 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = /usr/local/etc/stunnel/stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none ------------------------------- Any ideas would be great. Thanks. Kevin

3 2

nessus crashes stunnel
by Roger Cruz 12 Feb '10

12 Feb '10

We ran Nessus on a Linux system and found that stunnel crashes when the weak certificate suite is enabled. GDB shows the stack trace below and it appears to be in the SSL library. My search on this mailing list led me to this message that appears to report a similar problem http://mirt.net/pipermail/stunnel-users/2008-January/001830.html Am I to understand that the problem is really with OpenSSL and that's what needs to be upgraded? If so, do we know what version will have the fixed problem? I'm going to post in the OpenSSL forum as well, but I wanted to start here since from our perspective, Stunnel is the one crashing. Thank you Roger Cruz 2010.02.05 12:49:11 LOG7[13524:3086718672]: Cleaning up the signal pipe 2010.02.05 12:49:11 LOG6[13524:3086718672]: Child process 13575 finished with code 0 Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0xb7fa7b90 (LWP 13574)] 0x007b24a7 in krb5_is_referral_realm () from /usr/lib/libkrb5.so.3 (gdb) bt #0 0x007b24a7 in krb5_is_referral_realm () from /usr/lib/libkrb5.so.3 #1 0x0089d338 in kssl_keytab_is_available () from /lib/libssl.so.6 #2 0x008803b1 in ssl3_choose_cipher () from /lib/libssl.so.6 #3 0x0087b2a2 in ssl3_get_client_hello () from /lib/libssl.so.6 #4 0x0087bc85 in ssl3_accept () from /lib/libssl.so.6 #5 0x0089109a in SSL_accept () from /lib/libssl.so.6 #6 0x00884d0d in ssl23_get_client_hello () from /lib/libssl.so.6 #7 0x0088554b in ssl23_accept () from /lib/libssl.so.6 #8 0x0089109a in SSL_accept () from /lib/libssl.so.6 #9 0x003628e2 in ?? () from /usr/sbin/stunnel #10 0x00363acd in ?? () from /usr/sbin/stunnel #11 0x003645ba in ?? () from /usr/sbin/stunnel #12 0x003646a8 in client () from /usr/sbin/stunnel #13 0x0025f45b in start_thread () from /lib/libpthread.so.0 #14 0x00448e5e in clone () from /lib/libc.so.6 (gdb) quit [root@p20xen1 current_hq]# stunnel -version stunnel 4.15 on i686-redhat-linux-gnu with OpenSSL 0.9.8b 04 May 2006 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH key = /etc/stunnel/stunnel.pem session = 300 seconds TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none

1 0

using ECDH with stunnel
by Carl 11 Feb '10

11 Feb '10

Is is possible to use ECDH with stunnel? When using s_server and specifying the cipher I can establish a connection. But when using stunnel and specifing the same cipher, the connection is rejected with "no shared cipher". e.g. openssl s_server -cert server.pem -cipher DHE-RSA-AES256-SHA It appears the difference is that s_server uses "default temp ECDH parameters" while stunnel doesn't have a default nor is there a way to specify the ECDH parameters. >From what I understand the ECDH parameters cannot be included with the certificate, unlike DH parameters. Is my understanding correct? Thanks, Carl

2 2

SSL connection through Proxy server with authentication
by Girish Kolari 09 Feb '10

09 Feb '10

Hi I am trying to create a SSL connection through Proxy server with authentication. my stunnel.conf file ----- part of the conf file connect = <Proxy server IP: Port number> protocol=connect protocolHost=<Destination server:Port number> protocolUsername = useme protocolPassword = test ----- but it fails to establish connection. Log details: ----- part of log generated 2010.02.09 16:07:49 LOG5[14506:2952859648]: Negotiations for connect (client side) started 2010.02.09 16:07:49 LOG7[14506:2952859648]: -> CONNECT <Destination server:Port number> HTTP/1.1 2010.02.09 16:07:49 LOG7[14506:2952859648]: -> Host: 6<Destination server:Port number> 2010.02.09 16:07:49 LOG7[14506:2952859648]: -> Proxy-Authorization: basic dXNlbWU6dGVzdA== 2010.02.09 16:07:49 LOG7[14506:2952859648]: -> 2010.02.09 16:07:49 LOG3[14506:2952859648]: Unexpected socket close (fdgetline) 2010.02.09 16:07:49 LOG5[14506:2952859648]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2010.02.09 16:07:49 LOG7[14506:2952859648]: Service IDrive finished (0 left) ----- I tried with proxy server without authentication it works great, but not sure why Proxy server with authentication is not working. Is it I am missing some thing or am I doing something wrong? I appreciate all suggestion and help on this. Thanks & Regards Girish Kolari

1 0

Stunnel and multiple endpoints.
by Richard Harvey 09 Feb '10

09 Feb '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi guys, I'm new to stunnel and I'm looking for a way to run stunnel on a single port. Then based on the client certificate, proxy that connection (in clear) to a different IP:port. If this something I can do with stunnel or am i barking up the wrong tree so to speak. Any help would be a appreciated guys. Cheers Ric - -- Richard Harvey European Linux Administrator Core Systems Ticketmaster +44 (0)207 9804328 80228 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAktv5ZIACgkQlh7dZJ0PyjcfxQCfWA5PO0d/uDf/Mqq2BrFsu5wf xBYAoKmKW8760P91JR3oeviKwjd/1o/A =o+/U -----END PGP SIGNATURE-----

3 5

Re: [stunnel-users] Memory problems
by Peter Griffin 05 Feb '10

05 Feb '10

A portion of the messages in /var/log/stunnel.log before I disabled logging as I thought it would help: 2010.02.04 22:46:28 LOG3[1615:140132721108752]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:46:32 LOG3[1615:140132721108752]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:46:55 LOG3[1615:140132734469904]: getpeerbyname: Transport endpoint is not connected (107) 2010.02.04 22:46:57 LOG3[1615:140132734400272]: SSL_read: Connection reset by peer (104) 2010.02.04 22:47:12 LOG3[1615:140132734261008]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:47:35 LOG3[1615:140132735235856]: SSL_read: Connection reset by peer (104) 2010.02.04 22:48:08 LOG3[1615:140132733982480]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:48:09 LOG3[1615:140132721108752]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:48:09 LOG3[1615:140132721108752]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:48:09 LOG3[1615:140132721108752]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:48:23 LOG3[1615:140132735235856]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:48:42 LOG3[1615:140132733982480]: transfer() loop executes not transferring any data 2010.02.04 22:48:42 LOG3[1615:140132733982480]: please report the problem to Michal.Trojnara(a)mirt.net 2010.02.04 22:48:42 LOG3[1615:140132733982480]: socket open: rd=yes wr=no, ssl open: rd=no wr=yes 2010.02.04 22:48:42 LOG3[1615:140132733982480]: socket ready: rd=no wr=no, ssl ready: rd=yes wr=no 2010.02.04 22:48:42 LOG3[1615:140132733982480]: wants: SSL_read rd=no wr=no, SSL_write rd=no wr=yes, SSL_shutdown rd=no wr=no 2010.02.04 22:48:42 LOG3[1615:140132733982480]: socket input buffer: 16384 byte(s), ssl input buffer: 0 byte(s) 2010.02.04 22:48:42 LOG3[1615:140132733982480]: check_SSL_pending=0 2010.02.04 22:48:52 LOG3[1615:140132734261008]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:48:56 LOG3[1615:140132734261008]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:01 LOG3[1615:140132734330640]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:03 LOG3[1615:140132734400272]: SSL socket closed on SSL_read with 7294 byte(s) in buffer 2010.02.04 22:49:05 LOG3[1615:140132734469904]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:16 LOG3[1615:140132721108752]: SSL socket closed on SSL_read with 16384 byte(s) in buffer 2010.02.04 22:49:26 LOG3[1615:140132733982480]: SSL socket closed on SSL_read with 16384 byte(s) in buffer 2010.02.04 22:49:28 LOG3[1615:140132733982480]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:29 LOG3[1615:140132733982480]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:29 LOG3[1615:140132733982480]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:29 LOG3[1615:140132733982480]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:29 LOG3[1615:140132733982480]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:34 LOG3[1615:140132733982480]: getpeerbyname: Transport endpoint is not connected (107) 2010.02.04 22:49:35 LOG3[1615:140132720899856]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:35 LOG3[1615:140132733982480]: SSL_accept: Peer suddenly disconnected

1 0

Does stunnel support IPv6, and proxying from IPv4 to IPv6?
by Jeff Schmidt 05 Feb '10

05 Feb '10

Hello, I was wondering, does stunnel have IPv6 support? If so, does such support extend to the point of allowing the 'local' side of the connection (e.g. from a server process, or from a client application) to be made with IPv4, while the 'global' side is IPv6? If so, is it possible to use stunnel in an unencrypting mode (that is, not encrypting the data with SSL, but just using stunnel to proxy traffic between IPv4 and IPv6)? The reason I ask is that I am looking for a solution to allow me to IPv6-enable 'legacy' IPv4 applications. When I started thinking about this problem, I almost immediately remembered using stunnel in the past to SSL-enable IPv4 applications which didn't have built-in SSL support, and it occured to me that there was a lot of similarity between the non-SSL application problem, and the non-IPv6 application problem - that is, it seems like possibly, you could setup a sort of IPv6 tunnel using stunnel (or something similar), where the legacy application makes an local IPv4 connection to the stunnel/proxy software, and the proxy then makes an IPv6 connection, just like stunnel accepts local IPv4 connections (unecrypted) and then creates a second, proxied connection which is encrypted. Does that make any sense? (I hope so). So, can stunnel be used with both IPv4 and IPv6 simultaneously?

1 0

Memory problems
by Peter Griffin 05 Feb '10

05 Feb '10

Hi, I'm using stunnel 4.22 with OpenSSL 0.9.7m - I am using 4.22 because of the xforwarded-for patch and 4.27 is not supported. I am running stunnel in standalone mode on a P4 3.2Ghz with 1Gb of Ram. When I start haproxy & stunnel after a reboot, free memory starts at about 750Mb then slowly degrades to about 45Mb. After 8 more hours or so of operation our site was completely unbrowsable. I checked our firewall for unusual traffic, and there were none. Running top does not indicate any processes which are consuming all that memory and that is what I find weid. Only a reboot frees up the memory. Should I be running stunnel on more Ram? stunnel -v output: [root@lb1 ~]# stunnel -version stunnel 4.22 on x86_64-unknown-linux-gnu with OpenSSL 0.9.7m 23 Feb 2007 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Global options debug = 5 pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = ALL:!aNULL:!eNULL+RC4:@STRENGTH key = /usr/local/etc/stunnel/stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none stunnel.conf: #setuid=stunnel #setgid=proxy #debug = 3 #output = /var/log/stunnel.log socket=l:TCP_NODELAY=1 socket=r:TCP_NODELAY=1 [https] accept=10.0.1.50:443 connect=10.0.1.50:80 TIMEOUTclose=0 xforwardedfor=yes

1 0

HTTP Connect proxy patch
by Dmitry Gromov 05 Feb '10

05 Feb '10

Hi! It seems like the latest patch to support HTTP Connect proxy is for 4.05 version. Any one knows if it is compatible with the latest version? If not, is there more recent version of the patch? I also wonder why this never made to the code... Seems like a very useful feature. Thanks, Dmitry -- DG NJ

2 4

after 4.31 no more logging to syslog
by Axel Reinhold 05 Feb '10

05 Feb '10

> > with stunnel up to 4.29 i got syslog messages to /var/log/maillog. > > with stunnel 4.30 the startup was broken - some chroot-issues, > > with your patches i could get it running - with 4.31 stunnel is > > working for me but i don't get any syslogging any more - is there > > a way to get the old behaviour again? > > Please test: > ftp://stunnel.mirt.net/stunnel/stunnel-4.32b1.tar.gz > and let us know if it works for you. > > Best regards, > Mike > Dear Mike, looks very good - works for me 100%. Thanks. Cheers Axel

1 0

after 4.31 no more logging to syslog
by Axel Reinhold 04 Feb '10

04 Feb '10

with stunnel up to 4.29 i got syslog messages to /var/log/maillog. with stunnel 4.30 the startup was broken - some chroot-issues, with your patches i could get it running - with 4.31 stunnel is working for me but i don't get any syslogging any more - is there a way to get the old behaviour again? root@bongo opt]# grep stunnel /var/log/maillog Jan 27 21:38:25 bongo stunnel: LOG5[31985:16384]: stunnel 4.29 on i686-pc-linux-gnu with OpenSSL 0.9.8l 5 Nov 2009 Jan 27 21:38:25 bongo stunnel: LOG5[31985:16384]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Jan 27 21:38:25 bongo stunnel: LOG6[31985:16384]: file ulimit = 1024 (can be changed with 'ulimit -n') Jan 27 21:38:25 bongo stunnel: LOG6[31985:16384]: poll() used - no FD_SETSIZE limit for file descriptors Jan 27 21:38:25 bongo stunnel: LOG5[31985:16384]: 500 clients allowed Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 9 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 10 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 11 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: imaps bound to 0.0.0.0:993 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 12 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: pop3s bound to 0.0.0.0:995 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 13 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: arcorpop3 bound to 127.0.0.1:3003 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 14 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: bnvhpop3 bound to 127.0.0.1:3004 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 15 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: netidpop3 bound to 127.0.0.1:3005 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 16 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: icybolt bound to 127.0.0.1:3006 Jan 27 21:38:25 bongo stunnel: LOG7[31991:16384]: Created pid file /var/run/stunnel.pid Axel

2 1

Stunnel 4.31 released
by Michal Trojnara 03 Feb '10

03 Feb '10

The ChangeLog entry: Version 4.31, 2010.02.03, urgency: MEDIUM: * New features - Log file reopen on USR1 signal was added. * Bugfixes - Some regression issues introduced in 4.30 were fixed. SHA-1 value for stunnel-4.31.tar.gz: f51fc544a0554f6eee2bfca1fcb8ddcb8386ce32 Home page: http://stunnel.mirt.net/ Download: ftp://stunnel.mirt.net/stunnel/ Best regards, Michal Trojnara

1 0

after 4.30 no more working
by Axel Reinhold 03 Feb '10

03 Feb '10

My current compile-install-configure-run environment is broken with 4.30. Up to 4.29 stunnel is working ok for me. 4.30 compiles, installs but when running it (i simply start /opt/ssl/bin/stunnel) the behaviour is completely different. Up to version 4.29 the program simply starts and logs to syslog: root@bongo opt]# /opt/ssl/bin/stunnel root@bongo opt]# grep stunnel /var/log/maillog Jan 27 21:38:25 bongo stunnel: LOG5[31985:16384]: stunnel 4.29 on i686-pc-linux-gnu with OpenSSL 0.9.8l 5 Nov 2009 Jan 27 21:38:25 bongo stunnel: LOG5[31985:16384]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Jan 27 21:38:25 bongo stunnel: LOG6[31985:16384]: file ulimit = 1024 (can be changed with 'ulimit -n') Jan 27 21:38:25 bongo stunnel: LOG6[31985:16384]: poll() used - no FD_SETSIZE limit for file descriptors Jan 27 21:38:25 bongo stunnel: LOG5[31985:16384]: 500 clients allowed Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 9 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 10 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 11 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: imaps bound to 0.0.0.0:993 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 12 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: pop3s bound to 0.0.0.0:995 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 13 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: arcorpop3 bound to 127.0.0.1:3003 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 14 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: bnvhpop3 bound to 127.0.0.1:3004 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 15 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: netidpop3 bound to 127.0.0.1:3005 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 16 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: icybolt bound to 127.0.0.1:3006 Jan 27 21:38:25 bongo stunnel: LOG7[31991:16384]: Created pid file /var/run/stunnel.pid With 4.30 i get lots of messages to the console and stunnel does not fork into background - where is the magic to get the old behaviour with 4.30? At the end stunnel reports: daemon: No such file or directory (2) root@bongo opt]# /opt/ssl/bin/stunnel Reading configuration from file /etc/ssl/stunnel/stunnel.conf Snagged 64 random bytes from /root/.rnd Wrote 1024 new random bytes to /root/.rnd RAND_status claims sufficient entropy for the PRNG PRNG seeded successfully Certificate: /etc/ssl/stunnel/freakout.pem Certificate loaded Key file: /etc/ssl/stunnel/freakout.key Private key loaded SSL context initialized for service imaps Certificate: /etc/ssl/stunnel/freakout.pem Certificate loaded Key file: /etc/ssl/stunnel/freakout.key Private key loaded SSL context initialized for service pop3s SSL context initialized for service arcorpop3 SSL context initialized for service bnvhpop3 SSL context initialized for service netidpop3 SSL context initialized for service icybolt Configuration successful No limit detected for the number of clients FD=8 in non-blocking mode FD=9 in non-blocking mode FD=10 in non-blocking mode Option SO_REUSEADDR set on accept socket Service imaps bound to 0.0.0.0:993 Service imaps opened FD=10 FD=11 in non-blocking mode Option SO_REUSEADDR set on accept socket Service pop3s bound to 0.0.0.0:995 Service pop3s opened FD=11 FD=12 in non-blocking mode Option SO_REUSEADDR set on accept socket Service arcorpop3 bound to 127.0.0.1:3003 Service arcorpop3 opened FD=12 FD=13 in non-blocking mode Option SO_REUSEADDR set on accept socket Service bnvhpop3 bound to 127.0.0.1:3004 Service bnvhpop3 opened FD=13 FD=14 in non-blocking mode Option SO_REUSEADDR set on accept socket Service netidpop3 bound to 127.0.0.1:3005 Service netidpop3 opened FD=14 FD=15 in non-blocking mode Option SO_REUSEADDR set on accept socket Service icybolt bound to 127.0.0.1:3006 Service icybolt opened FD=15 Created pid file /var/run/stunnel.pid daemon: No such file or directory (2) removing pid file /var/run/stunnel.pid Axel

3 5

after 4.30 no more working
by Axel Reinhold 01 Feb '10

01 Feb '10

> Axel Reinhold wrote: > > root@bongo opt]# /opt/ssl/bin/stunnel > [cut] > > daemon: No such file or directory (2) > > removing pid file /var/run/stunnel.pid > > That's interesting. I couldn't reproduce it. > > Could you install strace tool and than execute: > strace -f -o /tmp/stunnel.log /opt/ssl/bin/stunnel > , and than send us the output of /tmp/stunnel.log? > > Mike Here's the strace-log.

2 1

Stunnel 4.3 not forwarding to server socket
by Vladimir Stariradev 29 Jan '10

29 Jan '10

Dear Stunnel users, I'm running stunnel on my server which accepts connections from my mobile phone emulator (j2me) like so: midlet app -> port:5555 stunnel -> port:6666 server. My midlet, which can be treated as a java app, uses ssl://127.0.0.1:5555 to connect to stunnel. I can establish a connection between the stunnel and the app because I can get information on the certificate. The problem is that when I send data from the midlet to the server, the server doesn't accept it, nor does it signal that anything has been received even when I have double-checked that the streams are setup. I have pasted my config and log files below. Any suggestions are fully appreciated. Regards, Vladimir version: stunnel 4.30 on x86-pc-mingw32-gnu with OpenSSL 0.9.8l 5 Nov 2009 stunnel.conf: cert = SecIM.pem debug = 7 ;output = stunnel.log [SecureIM] accept = 5555 connect = 6666 client = no Log file: 2010.01.28 17:51:09 LOG5[3828:1772]: Reading configuration from file stunnel.conf 2010.01.28 17:51:09 LOG7[3828:1772]: Snagged 64 random bytes from C:/.rnd 2010.01.28 17:51:09 LOG7[3828:1772]: Wrote 0 new random bytes to C:/.rnd 2010.01.28 17:51:09 LOG7[3828:1772]: RAND_status claims sufficient entropy for the PRNG 2010.01.28 17:51:09 LOG7[3828:1772]: PRNG seeded successfully 2010.01.28 17:51:09 LOG7[3828:1772]: Certificate: SecIM.pem 2010.01.28 17:51:09 LOG7[3828:1772]: Certificate loaded 2010.01.28 17:51:09 LOG7[3828:1772]: Key file: SecIM.pem 2010.01.28 17:51:11 LOG7[3828:1772]: Private key loaded 2010.01.28 17:51:11 LOG7[3828:1772]: SSL context initialized for service SecureIM 2010.01.28 17:51:11 LOG5[3828:1772]: Configuration successful 2010.01.28 17:51:11 LOG5[3828:1772]: No limit detected for the number of clients 2010.01.28 17:51:11 LOG7[3828:1772]: FD=168 in non-blocking mode 2010.01.28 17:51:11 LOG7[3828:1772]: Option SO_REUSEADDR set on accept socket 2010.01.28 17:51:11 LOG7[3828:1772]: Service SecureIM bound to 0.0.0.0:5555 2010.01.28 17:51:11 LOG7[3828:1772]: Service SecureIM opened FD=168 2010.01.28 17:51:11 LOG5[3828:1772]: stunnel 4.30 on x86-pc-mingw32-gnu with OpenSSL 0.9.8l 5 Nov 2009 2010.01.28 17:51:11 LOG5[3828:1772]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.01.28 17:52:13 LOG7[3828:2836]: Service SecureIM accepted FD=212 from 127.0.0.1:56133 2010.01.28 17:52:13 LOG7[3828:2836]: Creating a new thread 2010.01.28 17:52:13 LOG7[3828:2836]: New thread created 2010.01.28 17:52:13 LOG7[3828:3336]: Service SecureIM started 2010.01.28 17:52:13 LOG7[3828:3336]: FD=212 in non-blocking mode 2010.01.28 17:52:13 LOG7[3828:3336]: Option TCP_NODELAY set on local socket 2010.01.28 17:52:13 LOG5[3828:3336]: Service SecureIM accepted connection from 127.0.0.1:56133 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): before/accept initialization 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 read client hello A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 write server hello A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 write certificate A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 write server done A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 flush data 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 read client key exchange A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 read finished A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 write change cipher spec A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 write finished A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 flush data 2010.01.28 17:52:13 LOG7[3828:3336]: 1 items in the session cache 2010.01.28 17:52:13 LOG7[3828:3336]: 0 client connects (SSL_connect()) 2010.01.28 17:52:13 LOG7[3828:3336]: 0 client connects that finished 2010.01.28 17:52:13 LOG7[3828:3336]: 0 client renegotiations requested 2010.01.28 17:52:13 LOG7[3828:3336]: 1 server connects (SSL_accept()) 2010.01.28 17:52:13 LOG7[3828:3336]: 1 server connects that finished 2010.01.28 17:52:13 LOG7[3828:3336]: 0 server renegotiations requested 2010.01.28 17:52:13 LOG7[3828:3336]: 0 session cache hits 2010.01.28 17:52:13 LOG7[3828:3336]: 0 external session cache hits 2010.01.28 17:52:13 LOG7[3828:3336]: 0 session cache misses 2010.01.28 17:52:13 LOG7[3828:3336]: 0 session cache timeouts 2010.01.28 17:52:13 LOG6[3828:3336]: SSL accepted: new session negotiated 2010.01.28 17:52:13 LOG6[3828:3336]: Negotiated ciphers: RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 2010.01.28 17:52:13 LOG7[3828:3336]: FD=424 in non-blocking mode 2010.01.28 17:52:13 LOG6[3828:3336]: connect_blocking: connecting 127.0.0.1:6666 2010.01.28 17:52:13 LOG7[3828:3336]: connect_blocking: s_poll_wait 127.0.0.1:6666: waiting 10 seconds 2010.01.28 17:52:13 LOG5[3828:3336]: connect_blocking: connected 127.0.0.1:6666 2010.01.28 17:52:13 LOG5[3828:3336]: Service SecureIM connected remote server from 127.0.0.1:56134 2010.01.28 17:52:13 LOG7[3828:3336]: Remote FD=424 initialized 2010.01.28 17:52:13 LOG7[3828:3336]: Option TCP_NODELAY set on remote socket 2010.01.28 17:54:02 LOG3[3828:3336]: SSL_read: Connection reset by peer (WSAECONNRESET) (10054) 2010.01.28 17:54:02 LOG5[3828:3336]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2010.01.28 17:54:02 LOG7[3828:3336]: Service SecureIM finished (0 left)

1 1

Re: [stunnel-users] need to restart stunnel if stunnel starts before network?
by Michal Trojnara 23 Jan '10

23 Jan '10

Zhang Weiwu wrote: > For developer how do you think make stunnel resolving the domain when > establishing connection? Sure. This is already implemented and described in the manual: http://stunnel.mirt.net/static/stunnel.html The option is: delay = yes Mike

1 0

FIPS compilation patch for stunnel 4.30
by Michal Trojnara 21 Jan '10

21 Jan '10

Dear Users, Please find a tiny patch for FIPS mode of stunnel 4.30: ftp://stunnel.mirt.net/stunnel/fips.patch BTW: Please consider making a donation if you appreciate my work on configuration file reloading feature. Use PayPal Donate button on http://stunnel.mirt.net/ Mike

1 0

Stunnel 4.30 released
by Michal Trojnara 21 Jan '10

21 Jan '10

The ChangeLog entry: Version 4.30, 2010.01.21, urgency: LOW/EXPERIMENTAL: * New features - Graceful configuration reload with HUP signal on Unix and with GUI on Windows. This release involves major modifications of the code. I expect some regression issues, so please make sure to test this version well before running it on your production systems. SHA-1 value for stunnel-4.30.tar.gz: 46d21c3ad0e761d697f4de8c258ef999287f13f9 Home page: http://stunnel.mirt.net/ Download: ftp://stunnel.mirt.net/stunnel/ Best regards, Michal Trojnara

1 0

need to restart stunnel if stunnel starts before network?
by Zhang Weiwu 20 Jan '10

20 Jan '10

Hello. One reason to opt for stunnel instead of ssh -L to secure a local non-ssl client is, that if user use stunnel, it can work transparently, start working only when a connection is listened, so user do not have to start ssh-L before using the client and do not have to shut it down after using the client. However these days through the use of NetworkManager, the network interfaces are often not brought up when stunnel started as a system service. Instead, the network interfaces are brought up by users, in case of wifi or wan, after user typed password. I found I have to first start network interfaces, and run /etc/init.d/stunnel restart to prepare to run the insecure client. Is there a way to run in stunnel in such a way it does nothing except listening, and can recover from network restart, which happens from time to time for road warriors like me? Thanks in advance. I didn't find answer on FAQ by the way.

2 1

Is PSK supported with openssl-1.0.0-beta3 ?
by anders nilsson 20 Jan '10

20 Jan '10

Hello I am running x64 Linux 2.6.18-92.1.22.el5 and installed OpenSSL 1.0.0-beta3 15 Jul 2009 My stunnel -version is: stunnel 4.15 on x86_64-redhat-linux-gnu with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 I would like to run the ciphers TLS_PSK_WITH_3DES_EDE_CBC_SHA or TLS_PSK_WITH_AES_128_CBC_SHA and I wonder how I do that. My stunnel.conf contains: ciphers = PSK-AES128-CBC-SHA:PSK-3DES-EDE-CBC-SHA and the error I get is: 2009.11.05 11:32:32 LOG3[29268:47461015826624]: SSL_CTX_set_cipher_list: 1410D0B9: error:1410D0B9:SSL routines:SSL_CTX_set_cipher_list:no cipher match Do I compile in the latest OpenSSL to stunnel? Isnt it a problem that the stunnel.conf does not even have the syntax to read PSK-key parameters since its most often run with RSA keys. _________________________________________________________________ Windows Live: Gör det enklare för dina vänner att se vad du håller på med på Facebook. http://www.microsoft.com/sverige/windows/windowslive/see-it-in-action/socia…

1 0

PKI certs
by Lendl, Daniel 13 Jan '10

13 Jan '10

Will stunnel will work with PKI certs vs self-signed? Dan Lendl 919-257-3062

2 1