- stunnel-users - stunnel.org

Stunnel connection from A to B but direction from B to A?
by Carsten Krüger 13 Apr '10

13 Apr '10

Hi, is it possible with stunnel to connect from host A to host B but to have the port redirection the other way? host A has a webserver on 127.0.0.1:80 host A connects to Host B (example.dyndns.org:8000) Host B opens a browser on page http://127.0.0.1:80 and reaches the webserver on A If yes, how do I have to configure A and B? The manpage didn't enlighten me. The normal way A connects to B and A reaches webserver on B works perfectly. greetings Carsten

2 1

multiple systems
by tony westenhofer 12 Apr '10

12 Apr '10

Hello, My currently working setup is using verify=2 (at client only )and the server1's info is in my .pem on the clients. This works fine, but if need to have server2 act as backup when server1 is down. Can I just add server2's info to the .pem or do I need to setup multiple files for the different keys? Thanks in advance for saving me some lab time! Noob _________________________________________________________________ The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with Hotmail. http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID2…

1 0

"bind: Address already in use (48)"
by Dino Buzzetti 12 Apr '10

12 Apr '10

Please pardon me if this is an improper question to the list. But I am a freshman who uses stunnel to connect to his university library proxy from abroad. I had stunnel installed and it worked properly, but after an upgrade of all old ports, solicited by the installation process of a new application requiring MacPorts, stunnel doesn't work anymore. I have tried to re-install it, but I still get the same error message > Error binding squidssl to ::1:8095 > bind: Address already in use (48) Any clue as to what might have engaged the 8095 address and on how I might try to solve the problem? Best, -dino buzzetti

3 2

Stunnel doesn't work at all since 4.30
by Denis Solovyov 05 Apr '10

05 Apr '10

Dear friends, I use stunnel for a long time to provide pop3s connections inside a local network. It is quite an old linux server under 2.4 kernel. Stunnel is started from xinetd. xinetd.conf: service pop3s { socket_type = stream wait = no user = root server = /usr/local/bin/stunnel server_args = /usr/local/etc/stunnel/pop3s.conf bind = [ip_address] } /usr/local/etc/stunnel/pop3s.conf: cert = /usr/local/etc/stunnel/mail.pem debug = debug exec = /usr/local/sbin/popa3d execargs = popa3d Everything worked perfectly before 4.30, but when I installed 4.30 pop3s connections just stopped. There is absolutely nothing in logs, just start and stop; example: Mar 24 20:29:51 aldema xinetd[2235]: START: pop3s pid=19123 from=[ip] Mar 24 20:29:51 aldema xinetd[2235]: EXIT: pop3s status=1 pid=19123 duration=0(sec) It is "all.log", i.e. syslog puts everything (*.*) into this file. If starting xinetd with '-v' option, nothing interesting is shown in its own verbose output. When I use 4.29 all.log looks like (with debug = info): Mar 21 09:40:04 aldema xinetd[2235]: START: pop3s pid=32516 from=[ip] Mar 21 09:40:04 aldema stunnel: LOG5[32516:16384]: stunnel 4.29 on i686-pc-linux-gnu with OpenSSL 0.9.7e Mar 21 09:40:04 aldema stunnel: LOG5[32516:16384]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Mar 21 09:40:04 aldema stunnel: LOG5[32516:16384]: stunnel accepted connection from[ip]:4020 Mar 21 09:40:04 aldema stunnel: LOG6[32516:16384]: SSL accepted: new session negotiated Mar 21 09:40:04 aldema stunnel: LOG6[32516:16384]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 Mar 21 09:40:04 aldema stunnel: LOG6[32516:16384]: Local mode child started (PID=32517) Mar 21 09:40:05 aldema popa3d[32517]: Authentication passed for [username] from 127.0.0.1 Mar 21 09:40:05 aldema popa3d[32517]: 0 messages (0 bytes) loaded Mar 21 09:40:05 aldema popa3d[32517]: 0 (0) deleted, 0 (0) left Mar 21 09:40:05 aldema stunnel: LOG6[32516:16384]: SSL_shutdown successfully sent close_notify Mar 21 09:40:05 aldema stunnel: LOG5[32516:16384]: Connection closed: 29 bytes sent to SSL, 48 bytes sent to socket Mar 21 09:40:05 aldema xinetd[2235]: EXIT: pop3s status=0 pid=32516 duration=1(sec) When 4.30 was released I thought it may be buggy because it was marked "experimental", but now I see 4.32 and the same behaviour. Actually, I don't know what to do... nothing in logs really confuses me. Does it mean stunnel crashes at startup (running "stunnel -version" is OK)? Any ideas? Thank you. With the best regards, Denis Solovyov

1 1

Openssl-1.0.0 incompatibility
by Carter Browne 02 Apr '10

02 Apr '10

Is there any update on the compatibility issues between openssl-0.9.8n and openssl-1.0.0? The same configuration file was used in both cases. Linux CentOS 5.4 and SuSE 11.1. Stunnel and openssl both built from sources. I have a number of self-signed certificates in a sub-directory. With openssl-1.0.0, the error is: VERIFY ERROR: depth=0, error= self signed certificate:... SSL_accept: 140890B2: error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned With openssl-0.9.8n VERIFY OK: depth=0, ... I have compiled and linked a version of openssh-5.4p1 from sources with openssl-1.0.0 and it works correctly. Carter -- Carter Browne CBCS cbrowne(a)cbcs-usa.com 781-721-2890

2 1

Re: [stunnel-users] stunnel sends empty list of trusted CAs
by Sebastian Bork 01 Apr '10

01 Apr '10

2010/3/31 Michal Trojnara <Michal.Trojnara(a)mirt.net> > You should have implemented it the other way around: The "cert" option should contain the complete certificate chain of stunnel, > and "CApath"/"CAfile" should only contain the trusted CA certificate for "verify > = 2", and the trusted peer certificate for "verify = 3". Hi, thank you for your quick reply! Alas, I think we started with a misunderstanding. I know how the own certificate and the partner certificates are configured, and the instance with verify=3 works for some thirty partners. All client certificates are validated just as they should be. The file I set in "cert" contains the three certificates in the server certificate chain for stunnel, in the correct order. "CApath" is set to a directory that has all the symlinks with md5 hashes for the client certificates (the certificates themselves are all in their own subdirectories, with another set of symlinks, so I can use the subdirectory for an stunnel client process, and the directory at the top for the server). So when I wrote I put the whole certificate chain for each partner in the CA path, I meant in the directory there is the partner certificate as well as the certificate(s) of the CA that they got their certificate from. With "openssl verify -CApath . partner.crt" I check if everything is complete. Maybe this is overkill, if I do not really need a self-signed certificate at the top, but it shouldn't hurt either. The problem is this: their SAP software (I think they use the Business Connector, but it might be their PI directly, as indicated by the "XI" at the end of the capture file - I am no SAP guru) does not send a partner certificate. The partner claims this is because the "Distinguished Names" list is empty. In this list the server is supposed to send all the CAs it accepts, so the client can then chose one of the certificates it has installed to present it to the server. Since the list is empty, no certificate is found. So I need to find a way to send back a list of accepted root CA certificates. What I tried, and described in the mail, was this: I set up a second stunnel with verify=2. For this, I use the same file in "cert", but a new directory for CApath. In this directory, I have put the symlink for the CA certificate of the partner (their own company-wide CA) , in the hope that this is not only used to verify their client certificate when they present it, but also sent in the Distinguished Names list of accepted CAs. Unfortunately, this did not work, that list is still empty. I have attached the data of the connection attempt, including a screenshot the partner sent us, which shows the field they are talking about with a size of "0", Is there any way, regardless of how complex, to send the DNs? I'll gladly patch the source and compile instead of using a binary package, as long as it helps.

1 0

More Issues with Openssl 1.0.0
by Carter Browne 31 Mar '10

31 Mar '10

My standard configurations of stunnel use the verify=2 option. With recent versions of stunnel and openssl-0.9.8 for Linux systems, I have capath = /capath and stunnel searches directory /capath relative to chroot for the certificates. Using the same configuration file and openssl-1.0.0, this directory is no longer being searched. Any ideas about how to specify the location of capath with openssl-1.0.0? Thanks, Carter -- Carter Browne CBCS cbrowne(a)cbcs-usa.com 781-721-2890

2 1

stunnel sends empty list of trusted CAs
by Sebastian Bork 31 Mar '10

31 Mar '10

Hi, I have a problem which Google did not help me with. A communications partner of one of our customers wants to connect their SAP Business Connector to our platform using HTTPS. Our software does not have SSL/TLS implemented, we rather use stunnel for all communications links, inbound or outbound, where the customer or partner wants to use HTTPS with client authentication. The normal setup is "verify = 3" and the complete certificate chain for each partner is put into the CA path. In most cases, this works without problems. However, in the handshake, after the server certificate is sent and stunnel asks the client to send a client certificate, stunnel sends an empty list of triusted CAs. SAP BC expects the list of supported CAs to contain certificates, instead of being empty. My hope was that using "verify = 2" might help, so I have configured a new server instance of stunnel, and have copied the certificate of the partner's own CA into the CA path. Unfortunately, the partner says it still does not work, and the log file shows they still do not send their certificate when the server asks for a client cert. It seems that stunnel still returns an empty list of trusted CAs, which causes SAP BC to find no certificate to send. Is there any way I can configure stunnel to send back either every certificate found in a path or file, or at least to send back some fixed value for the trusted CAs?

2 1

Problem with openssl-1.0.0
by Carter Browne 30 Mar '10

30 Mar '10

For the Windows version of stunnel-4.31 and 4.32 I tried running stunnel with openssl-1.0.0 compiled for Windows and ssleay32.dll renamed to libssl32.dll. When I make a connection using using stunnel, I get a invalid memory reference to location 0 in libeay32.dll. I have had no problem with this approach with many versions of openssl up through and including openssl-0.9.8n. Any ideas? Carter -- Carter Browne CBCS cbrowne(a)cbcs-usa.com 781-721-2890

2 1

error:1408F10B
by Greg Groth 29 Mar '10

29 Mar '10

I'm having similar issues recently on two separate machines that are producing similar errors. In both instances, /var/log/messages starts filling up with lines similar to the following: SSL_accept: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number I can give further details on both systems, as well as the exact issue, if warranted. First off, can anyone explain what a 1408F10B error is? My gut feeling is that in both instances something changed on the client end (in both instances the client is a version of outlook). Any help would be greatly appreciated. Greg Groth

1 0

Re: [stunnel-users] GNU (clarification)
by tony westenhofer 27 Mar '10

27 Mar '10

Mr. Trojnara, That is what I was after: > Please simply include stunnel source (stunnel-4.xx.tar.gz) on whatever media > (e.g. CD, DVD, web page, etc.) you use to distribute your product together > with stunnel binary. Thank you again for such a wonderful piece of work-- And supporting it!!!!! Best Regards Tony > From: stunnel-users-request(a)mirt.net > Subject: stunnel-users Digest, Vol 68, Issue 9 > To: stunnel-users(a)mirt.net > Date: Sat, 27 Mar 2010 12:00:02 +0100 > > Send stunnel-users mailing list submissions to > stunnel-users(a)mirt.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://stunnel.mirt.net/mailman/listinfo/stunnel-users > or, via email, send a message with subject or body 'help' to > stunnel-users-request(a)mirt.net > > You can reach the person managing the list at > stunnel-users-owner(a)mirt.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of stunnel-users digest..." > > > Today's Topics: > > 1. Re: GNU (Michal Trojnara) > 2. Re: auto-disconnecting people when CRL updated (Michal Trojnara) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 26 Mar 2010 22:27:51 +0100 > From: Michal Trojnara <Michal.Trojnara(a)mirt.net> > Subject: Re: [stunnel-users] GNU > To: stunnel-users(a)mirt.net > Message-ID: <201003262228.10766.Michal.Trojnara(a)mirt.net> > Content-Type: text/plain; charset="utf-8" > > tony westenhofer wrote: > > I am using stunnel (no code modifications) to encrypt communications > > for some applications to eventually be sold. First off outstanding work, > > stunnel saved hours of work having to figure out how to add the security > > desired. > > Thank you. That's exactly why I wrote it. 8-) > > > Now I am wanting to make sure to comply with licensing. > > Can someone be specific and help on this? > > As the author of stunnel I'll be glad to help. > > > I know we have to post a few things on the website for the > > product. (what? a link, an actually dl > > for stunnel...) > > Please simply include stunnel source (stunnel-4.xx.tar.gz) on whatever media > (e.g. CD, DVD, web page, etc.) you use to distribute your product together > with stunnel binary. > > > What about paper distribution for the product, what > > about stunnel must be included? > > I'm not sure I understand your question. > Do you distribute your software on paper? > > Do you mean any advertisement or documentation for your product? > The license does not require that you do anything about it, but it would be > nice of you to mention my name. > > Best regards, > Michal Trojnara > the author of stunnel >

1 0

auto-disconnecting people when CRL updated
by David van Zijl 26 Mar '10

26 Mar '10

Hello Is it possible to get stunnel to disconnect people on a graceful restart when a certificate has expired? Stunnel version 4.30 added the graceful reload option which is great because it will allow us to reload the CRLs, keep everybody connected and prevent new people connecting when their certs have expired (tested and working) - however existing connections are not terminated even though they have just expired... I'm not sure if we've missed a configuration option or if this is just not possible. A little background: We host an IRC server listening on localhost:6667, on top of that we have stunnel listening on the external interface port 6697 We're using the CAfile and CRLpath options to ensure that people are connecting with a valid certificate. Every hour a job runs to download the latest CRL files, if there is a change it restarts stunnel and kicks everybody off (we'd like to use a graceful restart instead) We are running stunnel on Red Hat Linux using the following line inside an init script to run it as a daemon: daemon /usr/local/bin/stunnel /etc/stunnel/stunnel.conf Excerpt from stunnel.conf: setuid = daemon setgid = daemon ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [irc-in] CAfile = /etc/ca/our-chains.pem CRLpath = /etc/crl accept = 192.168.0.1:6697setuid = daemon setgid = daemon connect = localhost:6667 verify = 2 Running stunnel -version tells me: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = daemon.notice pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none Kind Regards Dave

2 1

GNU
by tony westenhofer 26 Mar '10

26 Mar '10

Hello, I am using stunnel (no code modifications) to encrypt communications for some applications to eventually be sold. First off outstanding work, stunnel saved hours of work having to figure out how to add the security desired. Now I am wanting to make sure to comply with licensing. Can someone be specific and help on this? I know we have to post a few things on the website for the product. (what? a link, an actually dl for stunnel...) What about paper distribution for the product, what about stunnel must be included? Please be as specific as you can or better yet point me to an example of someone else already giving proper credit where due. Again thank you for your hard work (all involved). Second question, any recommendations for securing the stunnel folder without interfering with its functionality on Windows systems. Have not had time to try locking down different ntfs setting yet. Thanks in advance and I do apologies if my questions have already been covered in the past. If so please provide url. Tony _________________________________________________________________ Hotmail is redefining busy with tools for the New Busy. Get more from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID27925::T:WLMTAGL:ON:…

2 1

Re: [stunnel-users] Stunnel 4.32 released
by Jose Alf. 26 Mar '10

26 Mar '10

Hi Michal, Thanks for the new 4.32 version. I tested beta 1 and 2 and everything worked fine on my side. Should have been released a day after because OpenSSL released a new version (0.9.8n) the same day. I compiled mine against it on Windows and it works. regards, Jose.

1 0

Still not working with client certificates
by Ron Cordell 24 Mar '10

24 Mar '10

Hello, I'm hoping that someone can give me a hint of where to look at this issue because I'm totally stuck and have been for a few days. When I attempt to use sTunnel in client mode with client certificates, the SSL seems to negotiate the certs and ciphers and then nothing else happens; the services hang. I'm hoping that someone has some insights about something that I haven't looked at, yet. My setup: Server: Windows Server, IIS 7 running SOAP services set for SSL Required, Client Certificate required (transport level client certificate, not SOAP message level). client: Windows machine, simple web application acting as a test client for the SOAP service. In between: sTunnel v4.32 Testing Scenario #1 -- Client configured to use client certificates directly against the IIS 7 service instance. This works as expected. Testing Scenario #2 -- Server configured to not require client certificates, but require SSL. sTunnel configured to listen on local port 8090 and forward to the IIS 7 server. This works as expected. Testing Scenario #3 -- Server configured to require client certificates. sTunnel configured to use client certificate as issued by a local CA in addition to the setup as before. This does not work, but hangs. sTunnel.conf: ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Certificate/key is needed in server mode and optional in client mode ; The default certificate is provided only for testing and should not ; be used in a production environment cert = C:\certs\client-cert-for-internal-environments.pem ;key = c:\certs\test_cert.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ;CApath = certs ; It's often easier to use CAfile ;CAfile = certs.pem ; Don't forget to c_rehash CRLpath ;CRLpath = crls ; Alternatively you can use CRLfile ;CRLfile = crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 output = c:\temp\stunnel.log ; Use it for client mode client = yes ; Service-level configuration ;[pop3s] ;accept = 995 ;connect = 110 ;[imaps] ;accept = 993 ;connect = 143 ;[ssmtp] ;accept = 465 ;connect = 25 [http] accept = 8090 ;connect = 10.12.32.164:443 connect = 10.12.32.68:1443 TIMEOUTclose = 0 ; vim:ft=dosini sTunnel log: 2010.03.24 11:54:31 LOG5[5616:5992]: Reading configuration from file stunnel.conf 2010.03.24 11:54:31 LOG7[5616:5992]: RAND_status claims sufficient entropy for the PRNG 2010.03.24 11:54:31 LOG7[5616:5992]: PRNG seeded successfully 2010.03.24 11:54:31 LOG7[5616:5992]: Certificate: C:\certs\client-cert-for-internal-environments.pem 2010.03.24 11:54:31 LOG7[5616:5992]: Certificate loaded 2010.03.24 11:54:31 LOG7[5616:5992]: Key file: C:\certs\client-cert-for-internal-environments.pem 2010.03.24 11:54:38 LOG7[5616:5992]: Private key loaded 2010.03.24 11:54:38 LOG7[5616:5992]: SSL context initialized for service http 2010.03.24 11:54:38 LOG5[5616:5992]: Configuration successful 2010.03.24 11:54:38 LOG5[5616:5992]: No limit detected for the number of clients 2010.03.24 11:54:38 LOG7[5616:5992]: FD=176 in non-blocking mode 2010.03.24 11:54:38 LOG7[5616:5992]: Option SO_REUSEADDR set on accept socket 2010.03.24 11:54:38 LOG7[5616:5992]: Service http bound to 0.0.0.0:8090 2010.03.24 11:54:38 LOG7[5616:5992]: Service http opened FD=176 2010.03.24 11:54:38 LOG3[5616:5992]: c:\temp\stunnel.log: Input/output error (5) 2010.03.24 11:54:38 LOG3[5616:5992]: Unable to open output file: c:\temp\stunnel.log 2010.03.24 11:54:38 LOG5[5616:5992]: stunnel 4.32 on x86-pc-mingw32-gnu with OpenSSL 0.9.8l 5 Nov 2009 2010.03.24 11:54:38 LOG5[5616:5992]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.03.24 11:54:54 LOG7[5616:6192]: Service http accepted FD=436 from 127.0.0.1:56102 2010.03.24 11:54:54 LOG7[5616:6192]: Creating a new thread 2010.03.24 11:54:54 LOG7[5616:6192]: New thread created 2010.03.24 11:54:54 LOG7[5616:6696]: Service http started 2010.03.24 11:54:54 LOG7[5616:6696]: FD=436 in non-blocking mode 2010.03.24 11:54:54 LOG7[5616:6696]: Option TCP_NODELAY set on local socket 2010.03.24 11:54:54 LOG5[5616:6696]: Service http accepted connection from 127.0.0.1:56102 2010.03.24 11:54:54 LOG7[5616:6696]: FD=456 in non-blocking mode 2010.03.24 11:54:54 LOG6[5616:6696]: connect_blocking: connecting 10.12.32.68:1443 2010.03.24 11:54:54 LOG7[5616:6696]: connect_blocking: s_poll_wait 10.12.32.68:1443: waiting 10 seconds 2010.03.24 11:54:54 LOG5[5616:6696]: connect_blocking: connected 10.12.32.68:1443 2010.03.24 11:54:54 LOG5[5616:6696]: Service http connected remote server from 10.12.47.109:56103 2010.03.24 11:54:54 LOG7[5616:6696]: Remote FD=456 initialized 2010.03.24 11:54:54 LOG7[5616:6696]: Option TCP_NODELAY set on remote socket 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): before/connect initialization 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 write client hello A 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 read server hello A 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 read server certificate A 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 read server done A 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 write client key exchange A 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 write change cipher spec A 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 write finished A 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 flush data 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 read finished A 2010.03.24 11:54:54 LOG7[5616:6696]: 1 items in the session cache 2010.03.24 11:54:54 LOG7[5616:6696]: 1 client connects (SSL_connect()) 2010.03.24 11:54:54 LOG7[5616:6696]: 1 client connects that finished 2010.03.24 11:54:54 LOG7[5616:6696]: 0 client renegotiations requested 2010.03.24 11:54:54 LOG7[5616:6696]: 0 server connects (SSL_accept()) 2010.03.24 11:54:54 LOG7[5616:6696]: 0 server connects that finished 2010.03.24 11:54:54 LOG7[5616:6696]: 0 server renegotiations requested 2010.03.24 11:54:54 LOG7[5616:6696]: 0 session cache hits 2010.03.24 11:54:54 LOG7[5616:6696]: 0 external session cache hits 2010.03.24 11:54:54 LOG7[5616:6696]: 0 session cache misses 2010.03.24 11:54:54 LOG7[5616:6696]: 0 session cache timeouts 2010.03.24 11:54:54 LOG6[5616:6696]: SSL connected: new session negotiated 2010.03.24 11:54:54 LOG6[5616:6696]: Negotiated ciphers: RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 This is where things time out; nothing happens beyond this point.

1 0

Stunnel 4.32 released
by Michal Trojnara 24 Mar '10

24 Mar '10

Dear Users, I'm glad to announce a new version of stunnel. The ChangeLog entry: Version 4.32, 2010.03.24, urgency: MEDIUM: * New features - New service-level "libwrap" option for run-time control whether /etc/hosts.allow and /etc/hosts.deny are used for access control. Disabling libwrap significantly increases performance of stunnel. - Win32 DLLs for OpenSSL 0.9.8m. * Bugfixes - Fixed a transfer() loop issue with SSLv2 connections. - Fixed a "setsockopt IP_TRANSPARENT" warning with "local" option. - Logging subsystem bugfixes and cleanup. - Installer bugfixes for Vista and later versions of Windows. - FIPS mode can be enabled/disabled at runtime. SHA-1 value for stunnel-4.32.tar.gz: e9be8b9150d1c901a7c37b58494e351815147a79 Home page: http://stunnel.mirt.net/ Download: ftp://stunnel.mirt.net/stunnel/ Best regards, Michal Trojnara

1 0

Trying to use client certificates but no success so far
by Ron Cordell 19 Mar '10

19 Mar '10

Hello, I'm trying to set up sTunnel to use client certificates in the following arrangement: Client Java Server (HTTP) --> sTunnel (HTTPS w/client cert) --> Windows IIS SOAP service, requires client cert The client certificate was generated from a MS CA cert generation tool, one we use for our internal certificates and our internal CA. The client cert was generated as a .pfx file and I used OpenSSL to convert it to a .pem file with the -nodes option. Testing without the client certificates shows that if the IIS hosted SOAP service is set to not require a client certificate, the sTunnel configuration works and we're able to communicate between the HTTP only client and the HTTPS IIS hosted service. However, once we add the certificate, the communication stops at the handshake. I'm wondering if I need to change the client .pem cert to have the private key (don't use the -nodes option when converting using OpenSSL). Here is the contents of the .conf file: ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Certificate/key is needed in server mode and optional in client mode ; The default certificate is provided only for testing and should not ; be used in a production environment cert = user_cert.pem key = user_cert.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ;CApath = certs ; It's often easier to use CAfile ;CAfile = certs.pem ; Don't forget to c_rehash CRLpath ;CRLpath = crls ; Alternatively you can use CRLfile ;CRLfile = crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 output = c:\temp\stunnel.log ; Use it for client mode client = yes ; Service-level configuration ;[pop3s] ;accept = 995 ;connect = 110 ;[imaps] ;accept = 993 ;connect = 143 ;[ssmtp] ;accept = 465 ;connect = 25 [http] accept = 8090 connect = 10.12.32.164:443 TIMEOUTclose = 0 ; vim:ft=dosini Here is the output from the log file showing two attempts to hit the service with the client cert, one from a browser and one from a bit of client code: 2010.03.19 09:58:27 LOG5[5864:4032]: Reading configuration from file stunnel.conf 2010.03.19 09:58:27 LOG7[5864:4032]: RAND_status claims sufficient entropy for the PRNG 2010.03.19 09:58:27 LOG7[5864:4032]: PRNG seeded successfully 2010.03.19 09:58:27 LOG7[5864:4032]: Certificate: user_cert.pem 2010.03.19 09:58:27 LOG7[5864:4032]: Certificate loaded 2010.03.19 09:58:27 LOG7[5864:4032]: Key file: user_cert.pem 2010.03.19 09:58:27 LOG7[5864:4032]: Private key loaded 2010.03.19 09:58:27 LOG7[5864:4032]: SSL context initialized for service http 2010.03.19 09:58:27 LOG5[5864:4032]: Configuration successful 2010.03.19 09:58:27 LOG5[5864:4032]: No limit detected for the number of clients 2010.03.19 09:58:27 LOG7[5864:4032]: FD=176 in non-blocking mode 2010.03.19 09:58:27 LOG7[5864:4032]: Option SO_REUSEADDR set on accept socket 2010.03.19 09:58:27 LOG7[5864:4032]: Service http bound to 0.0.0.0:8090 2010.03.19 09:58:27 LOG7[5864:4032]: Service http opened FD=176 2010.03.19 09:58:27 LOG5[5864:4032]: stunnel 4.31 on x86-pc-mingw32-gnu with OpenSSL 0.9.8l 5 Nov 2009 2010.03.19 09:58:27 LOG5[5864:4032]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.03.19 09:59:42 LOG7[5864:3864]: Service http accepted FD=440 from 127.0.0.1:49886 2010.03.19 09:59:42 LOG7[5864:3864]: Creating a new thread 2010.03.19 09:59:42 LOG7[5864:3864]: New thread created 2010.03.19 09:59:42 LOG7[5864:4328]: Service http started 2010.03.19 09:59:42 LOG7[5864:4328]: FD=440 in non-blocking mode 2010.03.19 09:59:42 LOG7[5864:4328]: Option TCP_NODELAY set on local socket 2010.03.19 09:59:42 LOG5[5864:4328]: Service http accepted connection from 127.0.0.1:49886 2010.03.19 09:59:42 LOG7[5864:4328]: FD=460 in non-blocking mode 2010.03.19 09:59:42 LOG6[5864:4328]: connect_blocking: connecting 10.12.32.164:443 2010.03.19 09:59:42 LOG7[5864:4328]: connect_blocking: s_poll_wait 10.12.32.164:443: waiting 10 seconds 2010.03.19 09:59:42 LOG5[5864:4328]: connect_blocking: connected 10.12.32.164:443 2010.03.19 09:59:42 LOG5[5864:4328]: Service http connected remote server from 10.12.47.109:49887 2010.03.19 09:59:42 LOG7[5864:4328]: Remote FD=460 initialized 2010.03.19 09:59:42 LOG7[5864:4328]: Option TCP_NODELAY set on remote socket 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): before/connect initialization 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 write client hello A 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 read server hello A 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 read server certificate A 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 read server done A 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 write client key exchange A 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 write change cipher spec A 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 write finished A 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 flush data 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 read finished A 2010.03.19 09:59:42 LOG7[5864:4328]: 1 items in the session cache 2010.03.19 09:59:42 LOG7[5864:4328]: 1 client connects (SSL_connect()) 2010.03.19 09:59:42 LOG7[5864:4328]: 1 client connects that finished 2010.03.19 09:59:42 LOG7[5864:4328]: 0 client renegotiations requested 2010.03.19 09:59:42 LOG7[5864:4328]: 0 server connects (SSL_accept()) 2010.03.19 09:59:42 LOG7[5864:4328]: 0 server connects that finished 2010.03.19 09:59:42 LOG7[5864:4328]: 0 server renegotiations requested 2010.03.19 09:59:42 LOG7[5864:4328]: 0 session cache hits 2010.03.19 09:59:42 LOG7[5864:4328]: 0 external session cache hits 2010.03.19 09:59:42 LOG7[5864:4328]: 0 session cache misses 2010.03.19 09:59:42 LOG7[5864:4328]: 0 session cache timeouts 2010.03.19 09:59:42 LOG6[5864:4328]: SSL connected: new session negotiated 2010.03.19 09:59:42 LOG6[5864:4328]: Negotiated ciphers: RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 2010.03.19 10:01:54 LOG3[5864:4328]: SSL_read: Connection reset by peer (WSAECONNRESET) (10054) 2010.03.19 10:01:54 LOG5[5864:4328]: Connection reset: 568 bytes sent to SSL, 0 bytes sent to socket 2010.03.19 10:01:54 LOG7[5864:4328]: Service http finished (0 left) 2010.03.19 10:03:28 LOG7[5864:3864]: Service http accepted FD=476 from 127.0.0.1:50155 2010.03.19 10:03:28 LOG7[5864:3864]: Creating a new thread 2010.03.19 10:03:28 LOG7[5864:3864]: New thread created 2010.03.19 10:03:28 LOG7[5864:1216]: Service http started 2010.03.19 10:03:28 LOG7[5864:1216]: FD=476 in non-blocking mode 2010.03.19 10:03:28 LOG7[5864:1216]: Option TCP_NODELAY set on local socket 2010.03.19 10:03:28 LOG5[5864:1216]: Service http accepted connection from 127.0.0.1:50155 2010.03.19 10:03:28 LOG7[5864:1216]: FD=440 in non-blocking mode 2010.03.19 10:03:28 LOG6[5864:1216]: connect_blocking: connecting 10.12.32.164:443 2010.03.19 10:03:28 LOG7[5864:1216]: connect_blocking: s_poll_wait 10.12.32.164:443: waiting 10 seconds 2010.03.19 10:03:28 LOG5[5864:1216]: connect_blocking: connected 10.12.32.164:443 2010.03.19 10:03:28 LOG5[5864:1216]: Service http connected remote server from 10.12.47.109:50156 2010.03.19 10:03:28 LOG7[5864:1216]: Remote FD=440 initialized 2010.03.19 10:03:28 LOG7[5864:1216]: Option TCP_NODELAY set on remote socket 2010.03.19 10:03:28 LOG7[5864:1216]: SSL state (connect): before/connect initialization 2010.03.19 10:03:28 LOG7[5864:1216]: SSL state (connect): SSLv3 write client hello A 2010.03.19 10:03:28 LOG7[5864:1216]: SSL state (connect): SSLv3 read server hello A 2010.03.19 10:03:28 LOG7[5864:1216]: SSL state (connect): SSLv3 read finished A 2010.03.19 10:03:28 LOG7[5864:1216]: SSL state (connect): SSLv3 write change cipher spec A 2010.03.19 10:03:28 LOG7[5864:1216]: SSL state (connect): SSLv3 write finished A 2010.03.19 10:03:28 LOG7[5864:1216]: SSL state (connect): SSLv3 flush data 2010.03.19 10:03:28 LOG7[5864:1216]: 1 items in the session cache 2010.03.19 10:03:28 LOG7[5864:1216]: 2 client connects (SSL_connect()) 2010.03.19 10:03:28 LOG7[5864:1216]: 2 client connects that finished 2010.03.19 10:03:28 LOG7[5864:1216]: 0 client renegotiations requested 2010.03.19 10:03:28 LOG7[5864:1216]: 0 server connects (SSL_accept()) 2010.03.19 10:03:28 LOG7[5864:1216]: 0 server connects that finished 2010.03.19 10:03:29 LOG7[5864:1216]: 0 server renegotiations requested 2010.03.19 10:03:29 LOG7[5864:1216]: 1 session cache hits 2010.03.19 10:03:29 LOG7[5864:1216]: 0 external session cache hits 2010.03.19 10:03:29 LOG7[5864:1216]: 0 session cache misses 2010.03.19 10:03:29 LOG7[5864:1216]: 0 session cache timeouts 2010.03.19 10:03:29 LOG6[5864:1216]: SSL connected: previous session reused 2010.03.19 10:04:28 LOG7[5864:1216]: Socket closed on read 2010.03.19 10:04:28 LOG7[5864:1216]: SSL write shutdown 2010.03.19 10:04:28 LOG7[5864:1216]: SSL alert (write): warning: close notify 2010.03.19 10:04:28 LOG6[5864:1216]: SSL_shutdown successfully sent close_notify 2010.03.19 10:04:28 LOG6[5864:1216]: s_poll_wait timeout: connection close 2010.03.19 10:04:28 LOG5[5864:1216]: Connection closed: 1541 bytes sent to SSL, 25 bytes sent to socket 2010.03.19 10:04:28 LOG7[5864:1216]: Service http finished (0 left) Any hints would be appreciated!

1 0

How to have multiple HTTPS connection with different PEM file
by Andrew Culross 18 Mar '10

18 Mar '10

We are running sTunnel 4.2 and want to have two HTTPS connection that use different PEM certs and are having difficulty doing this - how do you set this up? We have something like ---- Cert = cert1.pem [https] connect = xxx.xxx.xxx.xxx:442 connect = yyy.yyy.yyy.yyy:443 accept = 9876 ------ and we need something like this? -------- [https] connect = xxx.xxx.xxx.xxx:442 cert = cert1.pem accept = 9876 [https] connect = yyy.yyy.yyy.yyy:443 cert = cert2.pem accept = 9877 ----- Can we do that in the config file? If not, how does one specify ? Thanks! Andrew Culross TwoFour Systems 445 Hamilton Ave White Plains, NY 10601 Direct +1 (914) 220-8849 Main +1 (914) 220-8800 Fax +1 (914) 220-8899 <http://www.twofour.com/> www.TwoFour.com <http://www.twofour.com/emaildisclaimer.aspx> http://www.twofour.com/emaildisclaimer.aspx

2 1

Stunnel server with access from Firefox
by Ricky I 16 Mar '10

16 Mar '10

Hi, I am trying to use Stunnel to provide HTTPS access to a web site (my router configurations). That is, stunnel is used to accept HTTPS connection and it forwards the request using HTTP to the web site. The problem seems to be that one connection is opened and it performs an HTTP GET. Afterwards Stunnel does not accept any more connections and I have to restart. I'm not sure what I'm doing wrong. The strange thing I notice is that service router is finished with -1. What does minus one mean? I am using Firefox as the client. What I see is that Firefox is trying to load the page. Using wireshark, I was able to see that all the HTML data from the web page was loaded but Firefox was having trouble performing HTTP GET for the images on the site. I need to restart Stunnel in order to have another connection open. This is confirmed where I made a test by restarting Stunnel and then I tried to just load images from the Web site: e.g. https://192.168.1.88:8880/image1.jpg and https://192.168.1.88:8880/image2.jpg. I get image1.jpg but Firefox can't access image2.jpg, unless I restart then get image2. Here's the logs showing that I am able to make one access to the site. 2010.03.16 00:47:41 LOG5[3266:1024]: stunnel 4.31 on armv5tejl-unknown-linux-gnu with OpenSSL 0.9.8k 25 Mar 2009 2010.03.16 00:47:41 LOG5[3266:1024]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 2010.03.16 00:47:41 LOG7[3266:1024]: Cleaning up the signal pipe 2010.03.16 00:47:41 LOG7[3266:1024]: Signal pipe is empty 2010.03.16 00:47:46 LOG7[3266:1024]: Service router accepted FD=0 from 192.168.1.80:2821 2010.03.16 00:47:46 LOG7[3268:1026]: Service router started 2010.03.16 00:47:46 LOG7[3268:1026]: FD=0 in non-blocking mode 2010.03.16 00:47:46 LOG7[3268:1026]: Option TCP_NODELAY set on local socket 2010.03.16 00:47:46 LOG5[3268:1026]: Service router accepted connection from 192.168.1.80:2821 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): before/accept initialization 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 read client hello A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write server hello A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write certificate A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write server done A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 flush data 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 read client key exchange A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 read finished A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write change cipher spec A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write finished A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 flush data 2010.03.16 00:47:46 LOG7[3268:1026]: 1 items in the session cache 2010.03.16 00:47:46 LOG7[3268:1026]: 0 client connects (SSL_connect()) 2010.03.16 00:47:46 LOG7[3268:1026]: 0 client connects that finished 2010.03.16 00:47:46 LOG7[3268:1026]: 0 client renegotiations requested 2010.03.16 00:47:46 LOG7[3268:1026]: 1 server connects (SSL_accept()) 2010.03.16 00:47:46 LOG7[3268:1026]: 1 server connects that finished 2010.03.16 00:47:46 LOG7[3268:1026]: 0 server renegotiations requested 2010.03.16 00:47:46 LOG7[3268:1026]: 0 session cache hits 2010.03.16 00:47:46 LOG7[3268:1026]: 0 external session cache hits 2010.03.16 00:47:46 LOG7[3268:1026]: 1 session cache misses 2010.03.16 00:47:46 LOG7[3268:1026]: 0 session cache timeouts 2010.03.16 00:47:46 LOG6[3268:1026]: SSL accepted: new session negotiated 2010.03.16 00:47:46 LOG6[3268:1026]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 2010.03.16 00:47:46 LOG7[3268:1026]: FD=9 in non-blocking mode 2010.03.16 00:47:46 LOG6[3268:1026]: connect_blocking: connecting 192.168.1.1:80 2010.03.16 00:47:46 LOG7[3268:1026]: connect_blocking: s_poll_wait 192.168.1.1:80: waiting 10 seconds 2010.03.16 00:47:46 LOG5[3268:1026]: connect_blocking: connected 192.168.1.1:80 2010.03.16 00:47:46 LOG5[3268:1026]: Service router connected remote server from 192.168.1.88:1133 2010.03.16 00:47:46 LOG7[3268:1026]: Remote FD=9 initialized 2010.03.16 00:47:46 LOG7[3268:1026]: Option TCP_NODELAY set on remote socket 2010.03.16 00:47:46 LOG7[3268:1026]: Socket closed on read 2010.03.16 00:47:46 LOG7[3268:1026]: SSL write shutdown 2010.03.16 00:47:46 LOG7[3268:1026]: SSL alert (write): warning: close notify 2010.03.16 00:47:46 LOG6[3268:1026]: SSL_shutdown successfully sent close_notify 2010.03.16 00:47:46 LOG6[3268:1026]: s_poll_wait timeout: connection close 2010.03.16 00:47:46 LOG5[3268:1026]: Connection closed: 4675 bytes sent to SSL, 445 bytes sent to socket 2010.03.16 00:47:46 LOG7[3268:1026]: Service router finished (-1 left) ============ Finally here's my stunnel.conf: cert = /mnt/HD_a2/ffp/etc/stunnel/stunnel.pem sslVersion = SSLv3 pid = /stunnel.pid ; performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; debugging stuff (may useful for troubleshooting) debug = 7 output = /ffp/etc/stunnel/stunnel.log ; service-level configuration [router] accept = 8880 connect = 192.168.1.1:80 TIMEOUTclose = 0 Thank you very much for any help you can provide. Rick _________________________________________________________________ Check your Hotmail from your phone. http://go.microsoft.com/?linkid=9712957

1 0

DSA server certificate
by Carl 15 Mar '10

15 Mar '10

Hi, Does stunnel support server certificate with a DSA private key? When I try to use a self generated one, stunnel responds with: error stack: 140B3009 : error:140B3009:SSL routines:SSL_CTX_use_RSAPrivateKey_file:PEM lib SSL_CTX_use_RSAPrivateKey_file: 607907F: error:0607907F:digital envelope routines:EVP_PKEY_get1_RSA:expecting an rsa key Is this bug report relevant? http://www.mail-archive.com/[email protected]/msg43770.ht… Thanks, Carl

1 0

How do you configure Stunnel Ver 4.31 for TLSv1 - More Info
by David M. Douglass 11 Mar '10

11 Mar '10

Reference: Stunnel Ver 4.31 Windows Binaries This is the actual configuration file I am using. There is not too much to it. As shown below, this WORKS for Gmail's SSL port.. Port 465. Notice that the sslVersion statement is remarked "out". +++++++++++++++++++++++++++ output = STUNNEL.log taskbar = NO cert = stunnel.pem client = yes [SSMTP] accept=DADSXPPRO:8025 connect=smtp.gmail.com:465 ;sslVersion = TLSv1 ++++++++++++++++++++++++++++ In theory (as I have read it...), to change this to TLS, I enable the sslVersion line, And change the port (for Gmail) to 587. Port 587 and TLS for Gmail have been tested and verified via Microsoft Outlook testing. But when I do so, I cannot even log onto the Gmail server. I get the error message referenced in the first message: 2010.02.25 10:35:44 LOG3[2696:2740]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number It occurs to me that I am only using the "stunnel.pem" file, as supplied by the installer program. Do I have a certificate issue? David M. Douglass david(a)az-douglass.net Home (480) 839-2629 Cell (602) 908-9092

4 5

Problem with openssl engine
by Nick Sayer 27 Feb '10

27 Feb '10

I'm trying to use a smart card to hold on to the private key for my server. Since access to the smart card is restricted to one process at a time (not sure why it can't be shared, but that's a whole separate discussion), I'd like to use stunnel as the machine-wide SSL proxy. The problem is that with the pkcs11 engine configuration set up, it fails. 2010.02.27 00:15:03 LOG5[91580:0]: imaps accepted connection from 71.141.64.2:32934 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): before/accept initialization 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 read client hello A 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 write server hello A 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 write certificate A 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 write server done A 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 flush data 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 read client key exchange A 2010.02.27 00:15:03 LOG7[91580:0]: SSL alert (write): fatal: bad record mac 2010.02.27 00:15:03 LOG3[91580:0]: SSL_accept: 1408F119: error:1408F119:SSL routines:SSL3_GET_RECORD:decryption failed or bad record mac 2010.02.27 00:15:03 LOG5[91580:0]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2010.02.27 00:15:03 LOG7[91576:0]: Cleaning up the signal pipe 2010.02.27 00:15:03 LOG7[91576:0]: Process 91580 finished with code 0 (0 left) ^C2010.02.27 00:15:42 LOG3[91576:0]: Received signal 2; terminating This happens *whether or not* I use the private key on the smart card itself. If I load the private key from a disk file, it still happens - even if there is no engineNum statement in the service configuration block. The only way to make it not happen is to comment out the engineCtrl lines. engine=dynamic engineCtrl=SO_PATH:/usr/local/lib/engines/engine_pkcs11.so engineCtrl=ID:pkcs11 engineCtrl=LIST_ADD:1 engineCtrl=LOAD engineCtrl=MODULE_PATH:/usr/local/lib/pkcs11/opensc-pkcs11.so engineCtrl=INIT engineCtrl=PIN:12345678 [imaps] accept = 4993 connect = 143 engineNum = 1 key = id_10 ;cert = id_10 cert = /www.crt It's also worth noting that stunnel seems unable to pull the cert out of the card - that cert=id_10 line should work (works with openssl s_server). This stunnel was compiled last night from the FreeBSD ports tree with WITH_STUNNEL_SSL_ENGINE turned on. stunnel 4.29 on i386-portbld-freebsd8.0 with OpenSSL 0.9.8k 25 Mar 2009 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Global options debug = 5 pid = /var/tmp/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = /usr/local/etc/stunnel/stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none Note that the same card in the same system can successfully provide ssl server sockets with Java using the Sun PKCS11 JCE provider configured to talk to the opensc PKCS11 module. So there's nothing wrong with the card.

1 0

stunnel-4.15-2.el5.1 zombie when xinetd
by tatiana philippova 25 Feb '10

25 Feb '10

Hi All, I have a problem with stunnel in xinetd mode. It cannot connect to specified localhost:port - always getting child stunnel defunct as a result.. 4789 ? Ss 0:00 \_ stunnel /etc/stunnel/stunnel.conf 4790 ? Z 0:00 \_ [stunnel] <defunct> I'm trying use rsync via stunnel (!ssh for rsync does not suits me in this particular case, but I need encrypt backup traffic anyway.. so have chosen stunnel) client config: cert = /etc/stunnel/stunnel_client_cert.pem client = yes pid = /var/run/stunnel.pid debug = 7 output = /var/log/stunnel.log sslVersion = SSLv2 [ssync] accept = 873 connect = myhost.somewhere.net:273 server config: cert = /etc/stunnel/certs/host.pem key = /etc/stunnel/certs/private/cakey.pem client = no pid = /var/run/stunnel.pid debug = 7 #foreground = yes output = /var/log/stunel.log connect = 873 xinetd config: # default: off # description: SSL wrapper for rsyncd service ssync { disable = no socket_type = stream wait = no user = root server = /usr/sbin/stunnel server_args = /etc/stunnel/stunnel.conf log_on_success += HOST DURATION log_on_failure += HOST only_from = 192.168.5.15 127.0.0.1 } on server side /etc/services: ssync 273/tcp # rsync over stunnel # ps axf | grep rsyn 15637 ? S 0:00 /usr/bin/rsync -4 --daemon --no-detach # netstat -an --program | grep 273 tcp 0 0 0.0.0.0:273 0.0.0.0:* LISTEN 4751/xinetd # netstat -an --program | grep 873 tcp 0 0 127.0.0.1:873 0.0.0.0:* LISTEN 15637/rsync In case of server stunnel running as standalone - everything works perfectly well, but I need it working as xinetd service rather than standalone Could somebody kindly advise what I'm doing wrong? soft on server side: stunnel-4.15-2.el5.1, openssl-0.9.8e-7.el5 OS CentOS release 5.3 (Final), kernel 2.6.18-128.1.6.el5 on client side: stunnel-4.30-1.i386.rpm (compiled as rpmbuild -ta stunnel-4.30.tar.gz) openssl-0.9.8g-9.14.fc9.i686 OS Fedora release 9 (Sulphur) kernel 2.6.28 Many thanks in advance Taphy

1 0

How do you configure Stunnel Ver 4.31 for TLSv1
by David M. Douglass 25 Feb '10

25 Feb '10

I am using the Windows Binary of Version 4.31, and an external email utility that sends SMTP outgoing email. I can configure for specific ports (no problem). and I can send SSMTP SSLv3 with success. That is GOOD ! I am trying to configure Stunnel for sending TLSv1 without success. I understand (via the Version command and screen) that Stunnel defaults to SSLv3. How do I change that to TLSv1 ?? I found the parameter : sslVersion = version select version of SSL protocol Allowed options: all, SSLv2, SSLv3, TLSv1 This appears to be a "SERVICE LEVEL" option, and I have tried to use the line: sslVersion = TLSv1 in the [SSMTP] group of options (along with accept = and connect = ), but get an error message in the log file, which is shown next: 2010.02.25 10:35:44 LOG3[2696:2740]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number I have also tried to put the sslVersion = line in the general configuration area, but generate the same error message. The outbound email does, in fact, fail. Can anyone suggest what I am doing wrong ?? Or offer a solution for configuring Stunnel (V4.31) for TLSv1 ?? David M. Douglass david(a)az-douglass.net Home (480) 839-2629 Cell (602) 908-9092

1 0

How to use stunnel
by Gabriel kamega 24 Feb '10

24 Feb '10

Hello sir, Thank you for my subscription. This is the issue: I want to sent automaticly email via smtp.gmail.com server, And I think I need stunnel program. My questions are : *How to use stunnel ?* ; *How to configure the stunnel.conf file ?* I have dowloaded stunnel.exe version 431, but I can't download the * stunnel.pem* file. on the net I see that I have to install with this command : stunnel -install is that all ? on WXP Professionnel SP2 Regards merci

1 0