- stunnel-users - stunnel.org

Re: [stunnel-users] Temporary failure in name resolution, (Michal Trojnara)
by Phil Wieland 08 May '11

08 May '11

On 30/04/11 11:00, stunnel-users-request(a)stunnel.org wrote: > > Your stunnel.conf contains: > chroot = /var/lib/stunnel4/ > > Unfortunately this directory does not contain resolver configuration > files: [] >> > These are WITHOUT the suggested patch, I am not really equipped for >> > building on this server. > The patch should solve your problem by causing stunnel to wait until your > resolver is available before chroot(2) is executed. > > Workarounds: > 1. mkdir /var/lib/stunnel4/etc&& cp /etc/resolv.conf > /var/lib/stunnel4/etc/ > 2. Use IP address instead of host names in your stunnel.conf > 3. Add static IP address of your remote host to /etc/hosts > > Best regards, > Mike > > Many thanks for the analysis, Mike. I'll have to organise myself to build so I can apply the patch. Can I be really cheeky and ask one more question? Why does the problem not go away when my resolver is available - Shouldn't stunnel look again for this stuff after getting a temporary error? Thanks again, Phil

2 2

UTF-8 Compatibility
by RetailDecisions 06 May '11

06 May '11

Hi, Can someone tell me from what version of STUNNEL is fully UTF-8 compatible? -- View this message in context: http://old.nabble.com/UTF-8-Compatibility-tp31559422p31559422.html Sent from the Stunnel - Users mailing list archive at Nabble.com.

1 0

UTF-8 Compatibility
by Greg Piazza 06 May '11

06 May '11

Morning All, Can someone tell me from what version(s) of STUNNEL fully support UTF-8? Thanks, Greg Gregory J. Piazza Director of Development Retail Decisions, Inc (ReD) Metropark 379 Thornall St, 7th floor Edison, NJ 08837 USA Direct - +1 732-452-2457 Fax - +1 732-549-0101 Email - gpiazza(a)red-usa.com<mailto:[email protected]> Web - http://www.retaildecisions.com<http://www.retaildecisions.com/> Making Payments Simple and Secure

1 0

Patch for XMPP in client mode
by Philipp Hartwig 05 May '11

05 May '11

Hi, I've attached a small patch which adds support for the XMPP protocol in client mode. It does pretty much what Brian Hatch has outlined under [1]. I've tested it with several Jabber servers and it seems to work nicely. I'd be very happy about any comments. Regards, Philipp [1] http://stunnel.mirt.net/pipermail/stunnel-users/2009-February/002278.html

1 1

transparent = source, stunnel connect always times out
by Robert Hardy 05 May '11

05 May '11

I've been fighting with stunnel, trying to get its transparent proxy support to work. No matter what I do, as soon as transparent = source support is turned on, tests with my mail client just time out. If I turn transparent proxy support off it works but appears as if connections are from localhost, which is undesirable. My goal is to have stunnel listen on *:465 and provide SSL protected connectivity, which appear to arrive from the remote client IP, on my mail server's external IP address on port 25. My mail server and the firewall with the rules on it are the same physical machine. Can someone please make some suggestions as to what else I can try to get this working? I'm running Linux 2.6.38 on a current CentOS/rhel5 box and I've got modules built for most netfilter options, including: NF_CONNTRACK=m NETFILTER_TPROXY=m NETFILTER_XT_MATCH_SOCKET=m NETFILTER_XT_TARGET_TPROXY=m /proc/sys/net/ipv4/conf/all/rp_filter = 0 /proc/sys/net/ipv4/ip_forward = 1 This is my stunnel config: cert = /etc/stunnel/assps.crt key = /etc/stunnel/assps.key pid = /var/run/stunnel/stunnel_smtps.pid verify = 0 debug = 7 output = /var/log/stunnel_smtps.log TIMEOUTconnect = 60 [smtps] accept = 465 connect = MY_EXTERNAL_IP:25 transparent = source My stunnel seems happy with the DH Parameters in my cert file. My firewall relevant rules: iptables -t mangle -N DIVERT iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT iptables -t mangle -A DIVERT -j MARK --set-mark 1 iptables -t mangle -A DIVERT -j ACCEPT ip rule add fwmark 1 lookup 100 ip route add local 0.0.0.0/0 dev lo table 100 # stunnel -version stunnel 4.35 on i686-redhat-linux-gnu with OpenSSL 0.9.8e-fips-rhel5 01 July 2008 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = daemon.notice pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH curve = sect163r2 session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none # stunnel -sockets Socket option defaults: Option Accept Local Remote OS default SO_DEBUG -- -- -- 0 SO_DONTROUTE -- -- -- 0 SO_KEEPALIVE -- -- -- 0 SO_LINGER -- -- -- 0:0 SO_OOBINLINE -- -- -- 0 SO_RCVBUF -- -- -- 87380 SO_SNDBUF -- -- -- 16384 SO_RCVLOWAT -- -- -- 1 SO_SNDLOWAT -- -- -- 1 SO_RCVTIMEO -- -- -- 0:0 SO_SNDTIMEO -- -- -- 0:0 SO_REUSEADDR 1 -- -- 0 SO_BINDTODEVICE -- -- -- -- TCP_KEEPCNT -- -- -- 9 TCP_KEEPIDLE -- -- -- 7200 TCP_KEEPINTVL -- -- -- 75 IP_TOS -- -- -- 0 IP_TTL -- -- -- 64 TCP_NODELAY -- -- -- 0 Here is the log file with the connection timeout: 2011.03.20 15:26:43 LOG5[23214:3073877712]: Reading configuration from file /etc/stunnel/stunnel-assp_smtps.conf 2011.03.20 15:26:43 LOG7[23214:3073877712]: Snagged 64 random bytes from /root/.rnd 2011.03.20 15:26:43 LOG7[23214:3073877712]: Wrote 1024 new random bytes to /root/.rnd 2011.03.20 15:26:43 LOG7[23214:3073877712]: PRNG seeded successfully 2011.03.20 15:26:43 LOG7[23214:3073877712]: Using DH parameters from /etc/stunnel/assps.crt 2011.03.20 15:26:43 LOG6[23214:3073877712]: DH initialized with 512 bit key 2011.03.20 15:26:43 LOG7[23214:3073877712]: Certificate: /etc/stunnel/assps.crt 2011.03.20 15:26:43 LOG7[23214:3073877712]: Certificate loaded 2011.03.20 15:26:43 LOG7[23214:3073877712]: Key file: /etc/stunnel/assps.key 2011.03.20 15:26:43 LOG7[23214:3073877712]: Private key loaded 2011.03.20 15:26:43 LOG7[23214:3073877712]: SSL context initialized for service smtps 2011.03.20 15:26:43 LOG5[23214:3073877712]: Configuration successful 2011.03.20 15:26:43 LOG5[23214:3073877712]: No limit detected for the number of clients 2011.03.20 15:26:43 LOG7[23214:3073877712]: libwrap_init: FD=3 allocated (blocking mode) 2011.03.20 15:26:43 LOG7[23214:3073877712]: libwrap_init: FD=4 allocated (blocking mode) 2011.03.20 15:26:43 LOG7[23214:3073877712]: libwrap_init: FD=4 allocated (blocking mode) 2011.03.20 15:26:43 LOG7[23214:3073877712]: libwrap_init: FD=5 allocated (blocking mode) 2011.03.20 15:26:43 LOG7[23214:3073877712]: libwrap_init: FD=5 allocated (blocking mode) 2011.03.20 15:26:43 LOG7[23214:3073877712]: libwrap_init: FD=6 allocated (blocking mode) 2011.03.20 15:26:43 LOG7[23214:3073877712]: libwrap_init: FD=6 allocated (blocking mode) 2011.03.20 15:26:43 LOG7[23214:3073877712]: libwrap_init: FD=7 allocated (blocking mode) 2011.03.20 15:26:43 LOG7[23214:3073877712]: libwrap_init: FD=7 allocated (blocking mode) 2011.03.20 15:26:43 LOG7[23214:3073877712]: libwrap_init: FD=8 allocated (blocking mode) 2011.03.20 15:26:43 LOG7[23214:3073877712]: signal_pipe: FD=9 allocated (blocking mode) 2011.03.20 15:26:43 LOG7[23214:3073877712]: signal_pipe: FD=10 allocated (blocking mode) 2011.03.20 15:26:43 LOG7[23214:3073877712]: accept socket: FD=11 allocated (non-blocking mode) 2011.03.20 15:26:43 LOG7[23214:3073877712]: Option SO_REUSEADDR set on accept socket 2011.03.20 15:26:43 LOG7[23214:3073877712]: Service smtps bound to 0.0.0.0:465 2011.03.20 15:26:43 LOG7[23214:3073877712]: Service smtps opened FD=11 2011.03.20 15:26:44 LOG7[23220:3073877712]: Created pid file /var/run/stunnel/stunnel_smtps.pid 2011.03.20 15:26:44 LOG5[23220:3073877712]: stunnel 4.35 on i686-redhat-linux-gnu with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 2011.03.20 15:26:44 LOG5[23220:3073877712]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2011.03.20 15:26:56 LOG7[23220:3073877712]: local socket: FD=0 allocated (non-blocking mode) 2011.03.20 15:26:56 LOG7[23220:3073877712]: Service smtps accepted FD=0 from MY_TESTING_CLIENT_IP:56765 2011.03.20 15:26:56 LOG7[23220:3073874832]: Service smtps started 2011.03.20 15:26:56 LOG7[23220:3073874832]: Option TCP_NODELAY set on local socket 2011.03.20 15:26:56 LOG7[23220:3073874832]: Waiting for a libwrap process 2011.03.20 15:26:56 LOG7[23220:3073874832]: Acquired libwrap process #0 2011.03.20 15:26:56 LOG7[23220:3073874832]: Releasing libwrap process #0 2011.03.20 15:26:56 LOG7[23220:3073874832]: Released libwrap process #0 2011.03.20 15:26:56 LOG7[23220:3073874832]: Service smtps permitted by libwrap from MY_TESTING_CLIENT_IP:56765 2011.03.20 15:26:56 LOG5[23220:3073874832]: Service smtps accepted connection from MY_TESTING_CLIENT_IP:56765 2011.03.20 15:26:56 LOG7[23220:3073874832]: SSL state (accept): before/accept initialization 2011.03.20 15:26:56 LOG7[23220:3073874832]: SSL state (accept): SSLv3 read client hello A 2011.03.20 15:26:56 LOG7[23220:3073874832]: SSL state (accept): SSLv3 write server hello A 2011.03.20 15:26:56 LOG7[23220:3073874832]: SSL state (accept): SSLv3 write certificate A 2011.03.20 15:26:56 LOG7[23220:3073874832]: SSL state (accept): SSLv3 write certificate request A 2011.03.20 15:26:56 LOG7[23220:3073874832]: SSL state (accept): SSLv3 flush data 2011.03.20 15:26:56 LOG7[23220:3073874832]: SSL alert (read): warning: no certificate 2011.03.20 15:26:56 LOG7[23220:3073874832]: SSL state (accept): SSLv3 read client key exchange A 2011.03.20 15:26:56 LOG7[23220:3073874832]: SSL state (accept): SSLv3 read finished A 2011.03.20 15:26:56 LOG7[23220:3073874832]: SSL state (accept): SSLv3 write change cipher spec A 2011.03.20 15:26:56 LOG7[23220:3073874832]: SSL state (accept): SSLv3 write finished A 2011.03.20 15:26:56 LOG7[23220:3073874832]: SSL state (accept): SSLv3 flush data 2011.03.20 15:26:56 LOG7[23220:3073874832]: 1 items in the session cache 2011.03.20 15:26:56 LOG7[23220:3073874832]: 0 client connects (SSL_connect()) 2011.03.20 15:26:56 LOG7[23220:3073874832]: 0 client connects that finished 2011.03.20 15:26:56 LOG7[23220:3073874832]: 0 client renegotiations requested 2011.03.20 15:26:56 LOG7[23220:3073874832]: 1 server connects (SSL_accept()) 2011.03.20 15:26:56 LOG7[23220:3073874832]: 1 server connects that finished 2011.03.20 15:26:56 LOG7[23220:3073874832]: 0 server renegotiations requested 2011.03.20 15:26:56 LOG7[23220:3073874832]: 0 session cache hits 2011.03.20 15:26:56 LOG7[23220:3073874832]: 0 external session cache hits 2011.03.20 15:26:56 LOG7[23220:3073874832]: 0 session cache misses 2011.03.20 15:26:57 LOG7[23220:3073874832]: 0 session cache timeouts 2011.03.20 15:26:57 LOG6[23220:3073874832]: SSL accepted: new session negotiated 2011.03.20 15:26:57 LOG6[23220:3073874832]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 2011.03.20 15:26:57 LOG7[23220:3073874832]: remote socket: FD=1 allocated (non-blocking mode) 2011.03.20 15:26:57 LOG6[23220:3073874832]: local_bind succeeded on the original port 2011.03.20 15:26:57 LOG6[23220:3073874832]: connect_blocking: connecting MY_EXTERNAL_IP:25 2011.03.20 15:26:57 LOG7[23220:3073874832]: connect_blocking: s_poll_wait MY_EXTERNAL_IP:25: waiting 60 seconds 2011.03.20 15:27:57 LOG3[23220:3073874832]: connect_blocking: s_poll_wait MY_EXTERNAL_IP:25: TIMEOUTconnect exceeded 2011.03.20 15:27:57 LOG5[23220:3073874832]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2011.03.20 15:27:57 LOG7[23220:3073874832]: Service smtps finished (0 left) 2011.03.20 15:29:21 LOG7[23220:3073877712]: Dispatching signals from the signal pipe 2011.03.20 15:29:21 LOG5[23220:3073877712]: Received signal 15; terminating 2011.03.20 15:29:21 LOG7[23220:3073877712]: removing pid file /var/run/stunnel/stunnel_smtps.pid The only even slightly odd thing I see other than the timeouts is the " 2011.03.20 15:26:56 LOG7[23220:3073874832]: SSL alert (read): warning: no certificate" I'm not sure what that is about, but it doesn't seem critical...

2 3

Re: [stunnel-users] Réf. : Re: Réf. : Re: Réf. : Re: Réf. : Re: need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA
by Leandro Avila 04 May '11

04 May '11

Hi Laurent, Good to see you figured out the issue. I also learned more things myself. Thanks Jose ! To my knowledge cipher suites that use SHA2 are part of the TLS 1.2 specification but I don't think OpenSSL has that implemented. Cheers ---------------- Leandro Avila ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Wednesday, May 4, 2011 11:02 AM Subject: [stunnel-users] Réf. : Re: Réf. : Re: Réf. : Re: Réf. : Re: need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Hi everyone, It's ok now i have found the solution i add the root and intermediate certificate of verisign in my Capath and i use in s_client the option -CApath and now it's ok : New, TLSv1/SSLv3, Cipher is DES-CBC-SHA Server public key is 2048 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : SSLv3 Cipher : DES-CBC-SHA Session-ID: XXXXXXXXXXX Session-ID-ctx: Master-Key: XXXXXXXXXXXXXXXXXXXX Key-Arg : None Start Time: 1304524805 Timeout : 7200 (sec) Verify return code: 0 (ok) but i have another question: How can i test the SHA-2? i search the cipher corresponding in SHA-2 but i didn't found it. Thanks for your help. Regards, Laurent UK Laurent UK Analyste PROTOCOLES RBIS - DBF PBMF2 DOMAINE PMF202 ELECTRONIC FILES 41, rue de Valmy - 93100 Montreuil - ACI CME04B1 Bureau 4226 Tel: 01.58.16.86.45 (68645) 04/05/2011 15:36 Pour josealf(a)rocketmail.com cc stunnel-users(a)stunnel.org, stunnel-users-bounces(a)stunnel.org Objet Réf. : Re: Réf. : Re: Réf. : Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHALien Jose, thanks you, i use my client certificate but have another error now : 1028202:error:25066067:DSO support routines:DLFCN_LOAD:could not load the shared library:dso_dlfcn.c:162:filename(libz.so): Could not load module . System error: No such file or directory 1028202:error:25070067:DSO support routines:DSO_load:could not load the shared library:dso_lib.c:244: Enter pass phrase for /opt/freeware/etc/stunnel/keystore/crl-3skey.pem: CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:SSLv3 write client hello A SSL_connect:SSLv3 read server hello A depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=27:certificate not trusted verify return:1 depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=21:unable to verify the first certificate verify return:1 SSL_connect:SSLv3 read server certificate A SSL_connect:SSLv3 read server certificate request A SSL_connect:SSLv3 read server done A SSL_connect:SSLv3 write client certificate A SSL_connect:SSLv3 write client key exchange A SSL_connect:SSLv3 write certificate verify A SSL_connect:SSLv3 write change cipher spec A SSL_connect:SSLv3 write finished A SSL_connect:SSLv3 flush data SSL_connect:SSLv3 read finished A --- Certificate chain 0 s:/C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com i:/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 1 s:/C=ww/O=swift/OU=personalid/OU=bnpafrpp/CN=crl-3skey-ebics-ts i:/O=SWIFT --- Server certificate -----BEGIN CERTIFICATE----- XXXXXXXXXXXXXXXXXX -----END CERTIFICATE----- subject=/C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com issuer=/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 --- No client certificate CA names sent --- SSL handshake has read 2633 bytes and written 1732 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 2048 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : SSLv3 Cipher : AES256-SHA Session-ID: XXXXXXXXXXXXXXXXXX Session-ID-ctx: Master-Key: XXXXXXXXXXXXXXXXXX Key-Arg : None Start Time: 1304515751 Timeout : 7200 (sec) Verify return code: 21 (unable to verify the first certificate) --- Do you know the reason of this error? Maybe i have to add the first certificate file to a specific folder ? Regards, Laurent UK Internet josealf(a)rocketmail.com 04/05/2011 15:09 Pour Laurent UK cc stunnel-users(a)stunnel.org, stunnel-users-bounces(a)stunnel.org Objet Re: Réf. : Re: Réf. : Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, We need to present a client certificate to the server. That's the important part missing. Do that by adding -cert your_cert_filename to the command, like: openssl s_client -ssl3 -state -cert your_client_cert_filename -connect your-stunnel-ip:10443 See http://www.openssl.org/docs/apps/s_client.html Regards, Jose ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Wed, May 4, 2011 6:55:19 AM Subject: Réf. : Re: Réf. : Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Jose, thanks you for your response, i use the openssl s_client command but i have the following error : 1499296:error:25066067:DSO support routines:DLFCN_LOAD:could not load the shared library:dso_dlfcn.c:162:filename(libz.so): Could not load module . System error: No such file or directory 1499296:error:25070067:DSO support routines:DSO_load:could not load the shared library:dso_lib.c:244: CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:SSLv3 write client hello A SSL_connect:SSLv3 read server hello A depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=27:certificate not trusted verify return:1 depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=21:unable to verify the first certificate verify return:1 SSL_connect:SSLv3 read server certificate A SSL_connect:SSLv3 read server certificate request A SSL_connect:SSLv3 read server done A SSL3 alert write:warning:no certificate SSL_connect:SSLv3 write client certificate A SSL_connect:SSLv3 write client key exchange A SSL_connect:SSLv3 write change cipher spec A SSL_connect:SSLv3 write finished A SSL_connect:SSLv3 flush data SSL3 alert read:fatal:handshake failure SSL_connect:failed in SSLv3 read finished A 1499296:error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure:s3_pkt.c:1060:SSL alert number 40 1499296:error:1409E0E5:SSL routines:SSL3_WRITE_BYTES:ssl handshake failure:s3_pkt.c:530: is it normal? Thanks. Regards. Laurent UK Internet josealf(a)rocketmail.com 04/05/2011 13:38 Pour Laurent UK cc stunnel-users(a)stunnel.org, stunnel-users-bounces(a)stunnel.org Objet Re: Réf. : Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, Ideally, you should terminate the SSL connection on your final server. But that's not the problem here. It should work as is. Mosty likely the problem is on the client SSL software you are using to connect to stunnel. The cipher you are trying to use DESC-CBC-SHA works with SSLv3 and TLSv1. Can you force your client to use those protocols? Maybe it is trying to negotiate SSLv2. Also are you sure it is speaking SSL instead of plain text? You can test your connection to stunnel server with openssl s_client command. Example openssl s_client -ssl3 -state -connect your-stunnel-ip:10443 openssl s_client -tls1 -state -connect your-stunnel-ip:10443 if this works, we found the culprit. Regards Jose ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Wed, May 4, 2011 2:05:07 AM Subject: Réf. : Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Jose, I use 2 servers in my configuration: the first one who listenning on the port 10443 (where we receive encrypted traffic from software using ssl) and the second one who listenning the port 10016 (where we receive decrypted traffic). The first one receive the encrypted traffic, it decrypted it and send it to the second server that's why i only use the server mode on my fist server. Do you think that i also need to change this configuration? Cordialement, Laurent UK Internet josealf(a)rocketmail.com 03/05/2011 19:18 Pour Laurent UK cc stunnel-users(a)stunnel.org, stunnel-users-bounces(a)stunnel.org Objet Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, I'm not sure you are connecting the dots right. I see an stunnel server configuration. In this case, your stunnel is a front-end to a service you run on host XXXX port 10016. What is that service? Is stunnel running on the same host? Note that If stunnel is not running on the same host with IP XXXX, then you may have some traffic in clear text in your network (from the device running stunnel to the device hosting the service on port 10016). You need a client to connect to the stunnel server. Unless your client support SSL natively, you also should have an stunnel running on your client device with entries like these: client=yes [pestip] accept = 10443 connect = Your-Stunnel-server-IP:10443 In this case your client apps connects locally to port 10443, traffic is encrypted and sent to your server listening on port 10443, where it is decripted and send to IP XXXX port 10016. Regards, Jose ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Tue, May 3, 2011 10:48:11 AM Subject: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Dear Jose, here is the configuration file of my stunnel : ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Please make sure you understand them (especially the effect of chroot jail) ; Certificate/key is needed in server mode and optional in client mode cert = /opt/freeware/etc/stunnel/ca_nopass.pem foreground = yes syslog = yes ; Protocol version (all, SSLv2, SSLv3, TLSv1) ;sslVersion = SSLv2 sslVersion = all ;ciphers = DES-CBC-SHA ;ciphers = DES-CBC3-SHA:IDEA-CBC-MD5 ; Some security enhancements for UNIX systems - comment them out on Win32 ;chroot = /usr/local/stunnel/var/lib/stunnel ;chroot = /tmp/ ;setuid = root ;setgid = other ; PID is created inside chroot jail pid = /var/adm/stunnel_server_level1.pid ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ;compression = rle ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ;options = Options_SSL ; Authentication stuff verify = 3 ; Don't forget to c_rehash CApath ; CApath is located inside chroot jail CApath = /opt/freeware/etc/stunnel/CA_files/ ; It's often easier to use CAfile ;CAfile = /opt/freeware/etc/stunnel/ca.pem ; Don't forget to c_rehash CRLpath ; CRLpath is located inside chroot jail ;CRLpath = /crls ; Alternatively you can use CRLfile ;CRLfile = /usr/local/stunnel/etc/stunnel/crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 ; Use it for client mode client = no ; Service-level configuration [pesitip] accept = 10443 connect = XXXXXXX:10016 Thanks for your help. Regards. Laurent UK Internet josealf(a)rocketmail.com 03/05/2011 14:52 Veuillez répondre à josealf(a)rocketmail.com Pour Laurent UK, stunnel-users-bounces(a)stunnel.org, stunnel-users(a)stunnel.org cc Objet Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, Can you post your configuration? For security, You should change the real IPs (but not the ports) before posting. You can check: 1. Does your stunnel client config has client=yes? 2. Does your stunnel server config has client=no 3. Check your packet flow, that is: your accept/connect settings. Regards Jose -----Original Message----- From: laurent.uk(a)bnpparibas.com Sender: stunnel-users-bounces(a)stunnel.org Date: Tue, 3 May 2011 14:16:09 To: <stunnel-users(a)stunnel.org> Subject: [stunnel-users] need help error :SSL3_GET_RECORD:wrong version number with cipher DES-CBC-SHA _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users This message and any attachments (the "message") is intended solely for the addressees and is confidential. If you receive this message in error, please delete it and immediately notify the sender. Any use not in accord with its purpose, any dissemination or disclosure, either whole or partial, is prohibited except formal approval. The internet can not guarantee the integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will) not therefore be liable for the message if modified. Do not print this message unless it is necessary, consider the environment. --------------------------------------------- Ce message et toutes les pieces jointes (ci-apres le "message") sont etablis a l'intention exclusive de ses destinataires et sont confidentiels. Si vous recevez ce message par erreur, merci de le detruire et d'en avertir immediatement l'expediteur. Toute utilisation de ce message non conforme a sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. L'internet ne permettant pas d'assurer l'integrite de ce message, BNP PARIBAS (et ses filiales) decline(nt) toute responsabilite au titre de ce message, dans l'hypothese ou il aurait ete modifie. N'imprimez ce message que si necessaire, pensez a l'environnement. _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users

2 1

Re: [stunnel-users] Réf. : Re: Réf. : Re: Réf. : Re: Réf. : Re: need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA
by Jose Alf. 04 May '11

04 May '11

Laurent, Everything looks fine to me. Your were connected to the server using SSLv3 and AES256-SHA ciphers. The zlib error can be ignored. Message "Verify return code: 21 (unable to verify the first certificate)" indicates that openssl s_client was unable to verify the server certificate. You can get rid of this by giving the CAPath in the paremters and making sure the verisign root Ca cert is there. Regards, Jose ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Wed, May 4, 2011 8:36:16 AM Subject: Réf. : Re: Réf. : Re: Réf. : Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Jose, thanks you, i use my client certificate but have another error now : 1028202:error:25066067:DSO support routines:DLFCN_LOAD:could not load the shared library:dso_dlfcn.c:162:filename(libz.so): Could not load module . System error: No such file or directory 1028202:error:25070067:DSO support routines:DSO_load:could not load the shared library:dso_lib.c:244: Enter pass phrase for /opt/freeware/etc/stunnel/keystore/crl-3skey.pem: CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:SSLv3 write client hello A SSL_connect:SSLv3 read server hello A depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=27:certificate not trusted verify return:1 depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=21:unable to verify the first certificate verify return:1 SSL_connect:SSLv3 read server certificate A SSL_connect:SSLv3 read server certificate request A SSL_connect:SSLv3 read server done A SSL_connect:SSLv3 write client certificate A SSL_connect:SSLv3 write client key exchange A SSL_connect:SSLv3 write certificate verify A SSL_connect:SSLv3 write change cipher spec A SSL_connect:SSLv3 write finished A SSL_connect:SSLv3 flush data SSL_connect:SSLv3 read finished A --- Certificate chain 0 s:/C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com i:/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 1 s:/C=ww/O=swift/OU=personalid/OU=bnpafrpp/CN=crl-3skey-ebics-ts i:/O=SWIFT --- Server certificate -----BEGIN CERTIFICATE----- XXXXXXXXXXXXXXXXXX -----END CERTIFICATE----- subject=/C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com issuer=/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 --- No client certificate CA names sent --- SSL handshake has read 2633 bytes and written 1732 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 2048 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : SSLv3 Cipher : AES256-SHA Session-ID: XXXXXXXXXXXXXXXXXX Session-ID-ctx: Master-Key: XXXXXXXXXXXXXXXXXX Key-Arg : None Start Time: 1304515751 Timeout : 7200 (sec) Verify return code: 21 (unable to verify the first certificate) --- Do you know the reason of this error? Maybe i have to add the first certificate file to a specific folder ? Regards, Laurent UK Internet josealf(a)rocketmail.com 04/05/2011 15:09 Pour Laurent UK cc stunnel-users(a)stunnel.org, stunnel-users-bounces(a)stunnel.org Objet Re: Réf. : Re: Réf. : Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, We need to present a client certificate to the server. That's the important part missing. Do that by adding -cert your_cert_filename to the command, like: openssl s_client -ssl3 -state -cert your_client_cert_filename -connect your-stunnel-ip:10443 See http://www.openssl.org/docs/apps/s_client.html Regards, Jose ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Wed, May 4, 2011 6:55:19 AM Subject: Réf. : Re: Réf. : Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Jose, thanks you for your response, i use the openssl s_client command but i have the following error : 1499296:error:25066067:DSO support routines:DLFCN_LOAD:could not load the shared library:dso_dlfcn.c:162:filename(libz.so): Could not load module . System error: No such file or directory 1499296:error:25070067:DSO support routines:DSO_load:could not load the shared library:dso_lib.c:244: CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:SSLv3 write client hello A SSL_connect:SSLv3 read server hello A depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=27:certificate not trusted verify return:1 depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=21:unable to verify the first certificate verify return:1 SSL_connect:SSLv3 read server certificate A SSL_connect:SSLv3 read server certificate request A SSL_connect:SSLv3 read server done A SSL3 alert write:warning:no certificate SSL_connect:SSLv3 write client certificate A SSL_connect:SSLv3 write client key exchange A SSL_connect:SSLv3 write change cipher spec A SSL_connect:SSLv3 write finished A SSL_connect:SSLv3 flush data SSL3 alert read:fatal:handshake failure SSL_connect:failed in SSLv3 read finished A 1499296:error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure:s3_pkt.c:1060:SSL alert number 40 1499296:error:1409E0E5:SSL routines:SSL3_WRITE_BYTES:ssl handshake failure:s3_pkt.c:530: is it normal? Thanks. Regards. Laurent UK Internet josealf(a)rocketmail.com 04/05/2011 13:38 Pour Laurent UK cc stunnel-users(a)stunnel.org, stunnel-users-bounces(a)stunnel.org Objet Re: Réf. : Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, Ideally, you should terminate the SSL connection on your final server. But that's not the problem here. It should work as is. Mosty likely the problem is on the client SSL software you are using to connect to stunnel. The cipher you are trying to use DESC-CBC-SHA works with SSLv3 and TLSv1. Can you force your client to use those protocols? Maybe it is trying to negotiate SSLv2. Also are you sure it is speaking SSL instead of plain text? You can test your connection to stunnel server with openssl s_client command. Example openssl s_client -ssl3 -state -connect your-stunnel-ip:10443 openssl s_client -tls1 -state -connect your-stunnel-ip:10443 if this works, we found the culprit. Regards Jose ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Wed, May 4, 2011 2:05:07 AM Subject: Réf. : Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Jose, I use 2 servers in my configuration: the first one who listenning on the port 10443 (where we receive encrypted traffic from software using ssl) and the second one who listenning the port 10016 (where we receive decrypted traffic). The first one receive the encrypted traffic, it decrypted it and send it to the second server that's why i only use the server mode on my fist server. Do you think that i also need to change this configuration? Cordialement, Laurent UK Internet josealf(a)rocketmail.com 03/05/2011 19:18 Pour Laurent UK cc stunnel-users(a)stunnel.org, stunnel-users-bounces(a)stunnel.org Objet Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, I'm not sure you are connecting the dots right. I see an stunnel server configuration. In this case, your stunnel is a front-end to a service you run on host XXXX port 10016. What is that service? Is stunnel running on the same host? Note that If stunnel is not running on the same host with IP XXXX, then you may have some traffic in clear text in your network (from the device running stunnel to the device hosting the service on port 10016). You need a client to connect to the stunnel server. Unless your client support SSL natively, you also should have an stunnel running on your client device with entries like these: client=yes [pestip] accept = 10443 connect = Your-Stunnel-server-IP:10443 In this case your client apps connects locally to port 10443, traffic is encrypted and sent to your server listening on port 10443, where it is decripted and send to IP XXXX port 10016. Regards, Jose ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Tue, May 3, 2011 10:48:11 AM Subject: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Dear Jose, here is the configuration file of my stunnel : ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Please make sure you understand them (especially the effect of chroot jail) ; Certificate/key is needed in server mode and optional in client mode cert = /opt/freeware/etc/stunnel/ca_nopass.pem foreground = yes syslog = yes ; Protocol version (all, SSLv2, SSLv3, TLSv1) ;sslVersion = SSLv2 sslVersion = all ;ciphers = DES-CBC-SHA ;ciphers = DES-CBC3-SHA:IDEA-CBC-MD5 ; Some security enhancements for UNIX systems - comment them out on Win32 ;chroot = /usr/local/stunnel/var/lib/stunnel ;chroot = /tmp/ ;setuid = root ;setgid = other ; PID is created inside chroot jail pid = /var/adm/stunnel_server_level1.pid ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ;compression = rle ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ;options = Options_SSL ; Authentication stuff verify = 3 ; Don't forget to c_rehash CApath ; CApath is located inside chroot jail CApath = /opt/freeware/etc/stunnel/CA_files/ ; It's often easier to use CAfile ;CAfile = /opt/freeware/etc/stunnel/ca.pem ; Don't forget to c_rehash CRLpath ; CRLpath is located inside chroot jail ;CRLpath = /crls ; Alternatively you can use CRLfile ;CRLfile = /usr/local/stunnel/etc/stunnel/crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 ; Use it for client mode client = no ; Service-level configuration [pesitip] accept = 10443 connect = XXXXXXX:10016 Thanks for your help. Regards. Laurent UK Internet josealf(a)rocketmail.com 03/05/2011 14:52 Veuillez répondre à josealf(a)rocketmail.com Pour Laurent UK, stunnel-users-bounces(a)stunnel.org, stunnel-users(a)stunnel.org cc Objet Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, Can you post your configuration? For security, You should change the real IPs (but not the ports) before posting. You can check: 1. Does your stunnel client config has client=yes? 2. Does your stunnel server config has client=no 3. Check your packet flow, that is: your accept/connect settings. Regards Jose -----Original Message----- From: laurent.uk(a)bnpparibas.com Sender: stunnel-users-bounces(a)stunnel.org Date: Tue, 3 May 2011 14:16:09 To: <stunnel-users(a)stunnel.org> Subject: [stunnel-users] need help error :SSL3_GET_RECORD:wrong version number with cipher DES-CBC-SHA _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users This message and any attachments (the "message") is intended solely for the addressees and is confidential. If you receive this message in error, please delete it and immediately notify the sender. Any use not in accord with its purpose, any dissemination or disclosure, either whole or partial, is prohibited except formal approval. The internet can not guarantee the integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will) not therefore be liable for the message if modified. Do not print this message unless it is necessary, consider the environment. --------------------------------------------- Ce message et toutes les pieces jointes (ci-apres le "message") sont etablis a l'intention exclusive de ses destinataires et sont confidentiels. Si vous recevez ce message par erreur, merci de le detruire et d'en avertir immediatement l'expediteur. Toute utilisation de ce message non conforme a sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. L'internet ne permettant pas d'assurer l'integrite de ce message, BNP PARIBAS (et ses filiales) decline(nt) toute responsabilite au titre de ce message, dans l'hypothese ou il aurait ete modifie. N'imprimez ce message que si necessaire, pensez a l'environnement.

1 0

Re: [stunnel-users] Réf. : Re: Réf. : Re: Réf. : Re: need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA
by Jose Alf. 04 May '11

04 May '11

Laurent, We need to present a client certificate to the server. That's the important part missing. Do that by adding -cert your_cert_filename to the command, like: openssl s_client -ssl3 -state -cert your_client_cert_filename -connect your-stunnel-ip:10443 See http://www.openssl.org/docs/apps/s_client.html Regards, Jose ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Wed, May 4, 2011 6:55:19 AM Subject: Réf. : Re: Réf. : Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Jose, thanks you for your response, i use the openssl s_client command but i have the following error : 1499296:error:25066067:DSO support routines:DLFCN_LOAD:could not load the shared library:dso_dlfcn.c:162:filename(libz.so): Could not load module . System error: No such file or directory 1499296:error:25070067:DSO support routines:DSO_load:could not load the shared library:dso_lib.c:244: CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:SSLv3 write client hello A SSL_connect:SSLv3 read server hello A depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=27:certificate not trusted verify return:1 depth=0 /C=FR/ST=PARIS/L=PARIS/O=BNP PARIBAS/OU=RBIS_PMF202/CN=psp-exp.bnpparibas.com verify error:num=21:unable to verify the first certificate verify return:1 SSL_connect:SSLv3 read server certificate A SSL_connect:SSLv3 read server certificate request A SSL_connect:SSLv3 read server done A SSL3 alert write:warning:no certificate SSL_connect:SSLv3 write client certificate A SSL_connect:SSLv3 write client key exchange A SSL_connect:SSLv3 write change cipher spec A SSL_connect:SSLv3 write finished A SSL_connect:SSLv3 flush data SSL3 alert read:fatal:handshake failure SSL_connect:failed in SSLv3 read finished A 1499296:error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure:s3_pkt.c:1060:SSL alert number 40 1499296:error:1409E0E5:SSL routines:SSL3_WRITE_BYTES:ssl handshake failure:s3_pkt.c:530: is it normal? Thanks. Regards. Laurent UK Internet josealf(a)rocketmail.com 04/05/2011 13:38 Pour Laurent UK cc stunnel-users(a)stunnel.org, stunnel-users-bounces(a)stunnel.org Objet Re: Réf. : Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, Ideally, you should terminate the SSL connection on your final server. But that's not the problem here. It should work as is. Mosty likely the problem is on the client SSL software you are using to connect to stunnel. The cipher you are trying to use DESC-CBC-SHA works with SSLv3 and TLSv1. Can you force your client to use those protocols? Maybe it is trying to negotiate SSLv2. Also are you sure it is speaking SSL instead of plain text? You can test your connection to stunnel server with openssl s_client command. Example openssl s_client -ssl3 -state -connect your-stunnel-ip:10443 openssl s_client -tls1 -state -connect your-stunnel-ip:10443 if this works, we found the culprit. Regards Jose ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Wed, May 4, 2011 2:05:07 AM Subject: Réf. : Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Jose, I use 2 servers in my configuration: the first one who listenning on the port 10443 (where we receive encrypted traffic from software using ssl) and the second one who listenning the port 10016 (where we receive decrypted traffic). The first one receive the encrypted traffic, it decrypted it and send it to the second server that's why i only use the server mode on my fist server. Do you think that i also need to change this configuration? Cordialement, Laurent UK Internet josealf(a)rocketmail.com 03/05/2011 19:18 Pour Laurent UK cc stunnel-users(a)stunnel.org, stunnel-users-bounces(a)stunnel.org Objet Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, I'm not sure you are connecting the dots right. I see an stunnel server configuration. In this case, your stunnel is a front-end to a service you run on host XXXX port 10016. What is that service? Is stunnel running on the same host? Note that If stunnel is not running on the same host with IP XXXX, then you may have some traffic in clear text in your network (from the device running stunnel to the device hosting the service on port 10016). You need a client to connect to the stunnel server. Unless your client support SSL natively, you also should have an stunnel running on your client device with entries like these: client=yes [pestip] accept = 10443 connect = Your-Stunnel-server-IP:10443 In this case your client apps connects locally to port 10443, traffic is encrypted and sent to your server listening on port 10443, where it is decripted and send to IP XXXX port 10016. Regards, Jose ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Tue, May 3, 2011 10:48:11 AM Subject: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Dear Jose, here is the configuration file of my stunnel : ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Please make sure you understand them (especially the effect of chroot jail) ; Certificate/key is needed in server mode and optional in client mode cert = /opt/freeware/etc/stunnel/ca_nopass.pem foreground = yes syslog = yes ; Protocol version (all, SSLv2, SSLv3, TLSv1) ;sslVersion = SSLv2 sslVersion = all ;ciphers = DES-CBC-SHA ;ciphers = DES-CBC3-SHA:IDEA-CBC-MD5 ; Some security enhancements for UNIX systems - comment them out on Win32 ;chroot = /usr/local/stunnel/var/lib/stunnel ;chroot = /tmp/ ;setuid = root ;setgid = other ; PID is created inside chroot jail pid = /var/adm/stunnel_server_level1.pid ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ;compression = rle ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ;options = Options_SSL ; Authentication stuff verify = 3 ; Don't forget to c_rehash CApath ; CApath is located inside chroot jail CApath = /opt/freeware/etc/stunnel/CA_files/ ; It's often easier to use CAfile ;CAfile = /opt/freeware/etc/stunnel/ca.pem ; Don't forget to c_rehash CRLpath ; CRLpath is located inside chroot jail ;CRLpath = /crls ; Alternatively you can use CRLfile ;CRLfile = /usr/local/stunnel/etc/stunnel/crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 ; Use it for client mode client = no ; Service-level configuration [pesitip] accept = 10443 connect = XXXXXXX:10016 Thanks for your help. Regards. Laurent UK Internet josealf(a)rocketmail.com 03/05/2011 14:52 Veuillez répondre à josealf(a)rocketmail.com Pour Laurent UK, stunnel-users-bounces(a)stunnel.org, stunnel-users(a)stunnel.org cc Objet Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, Can you post your configuration? For security, You should change the real IPs (but not the ports) before posting. You can check: 1. Does your stunnel client config has client=yes? 2. Does your stunnel server config has client=no 3. Check your packet flow, that is: your accept/connect settings. Regards Jose -----Original Message----- From: laurent.uk(a)bnpparibas.com Sender: stunnel-users-bounces(a)stunnel.org Date: Tue, 3 May 2011 14:16:09 To: <stunnel-users(a)stunnel.org> Subject: [stunnel-users] need help error :SSL3_GET_RECORD:wrong version number with cipher DES-CBC-SHA _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users This message and any attachments (the "message") is intended solely for the addressees and is confidential. If you receive this message in error, please delete it and immediately notify the sender. Any use not in accord with its purpose, any dissemination or disclosure, either whole or partial, is prohibited except formal approval. The internet can not guarantee the integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will) not therefore be liable for the message if modified. Do not print this message unless it is necessary, consider the environment. --------------------------------------------- Ce message et toutes les pieces jointes (ci-apres le "message") sont etablis a l'intention exclusive de ses destinataires et sont confidentiels. Si vous recevez ce message par erreur, merci de le detruire et d'en avertir immediatement l'expediteur. Toute utilisation de ce message non conforme a sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. L'internet ne permettant pas d'assurer l'integrite de ce message, BNP PARIBAS (et ses filiales) decline(nt) toute responsabilite au titre de ce message, dans l'hypothese ou il aurait ete modifie. N'imprimez ce message que si necessaire, pensez a l'environnement.

1 0

Re: [stunnel-users] Réf. : Re: Réf. : Re: need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA
by Jose Alf. 04 May '11

04 May '11

Laurent, Ideally, you should terminate the SSL connection on your final server. But that's not the problem here. It should work as is. Mosty likely the problem is on the client SSL software you are using to connect to stunnel. The cipher you are trying to use DESC-CBC-SHA works with SSLv3 and TLSv1. Can you force your client to use those protocols? Maybe it is trying to negotiate SSLv2. Also are you sure it is speaking SSL instead of plain text? You can test your connection to stunnel server with openssl s_client command. Example openssl s_client -ssl3 -state -connect your-stunnel-ip:10443 openssl s_client -tls1 -state -connect your-stunnel-ip:10443 if this works, we found the culprit. Regards Jose ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Wed, May 4, 2011 2:05:07 AM Subject: Réf. : Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Jose, I use 2 servers in my configuration: the first one who listenning on the port 10443 (where we receive encrypted traffic from software using ssl) and the second one who listenning the port 10016 (where we receive decrypted traffic). The first one receive the encrypted traffic, it decrypted it and send it to the second server that's why i only use the server mode on my fist server. Do you think that i also need to change this configuration? Cordialement, Laurent UK Internet josealf(a)rocketmail.com 03/05/2011 19:18 Pour Laurent UK cc stunnel-users(a)stunnel.org, stunnel-users-bounces(a)stunnel.org Objet Re: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, I'm not sure you are connecting the dots right. I see an stunnel server configuration. In this case, your stunnel is a front-end to a service you run on host XXXX port 10016. What is that service? Is stunnel running on the same host? Note that If stunnel is not running on the same host with IP XXXX, then you may have some traffic in clear text in your network (from the device running stunnel to the device hosting the service on port 10016). You need a client to connect to the stunnel server. Unless your client support SSL natively, you also should have an stunnel running on your client device with entries like these: client=yes [pestip] accept = 10443 connect = Your-Stunnel-server-IP:10443 In this case your client apps connects locally to port 10443, traffic is encrypted and sent to your server listening on port 10443, where it is decripted and send to IP XXXX port 10016. Regards, Jose ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Tue, May 3, 2011 10:48:11 AM Subject: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Dear Jose, here is the configuration file of my stunnel : ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Please make sure you understand them (especially the effect of chroot jail) ; Certificate/key is needed in server mode and optional in client mode cert = /opt/freeware/etc/stunnel/ca_nopass.pem foreground = yes syslog = yes ; Protocol version (all, SSLv2, SSLv3, TLSv1) ;sslVersion = SSLv2 sslVersion = all ;ciphers = DES-CBC-SHA ;ciphers = DES-CBC3-SHA:IDEA-CBC-MD5 ; Some security enhancements for UNIX systems - comment them out on Win32 ;chroot = /usr/local/stunnel/var/lib/stunnel ;chroot = /tmp/ ;setuid = root ;setgid = other ; PID is created inside chroot jail pid = /var/adm/stunnel_server_level1.pid ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ;compression = rle ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ;options = Options_SSL ; Authentication stuff verify = 3 ; Don't forget to c_rehash CApath ; CApath is located inside chroot jail CApath = /opt/freeware/etc/stunnel/CA_files/ ; It's often easier to use CAfile ;CAfile = /opt/freeware/etc/stunnel/ca.pem ; Don't forget to c_rehash CRLpath ; CRLpath is located inside chroot jail ;CRLpath = /crls ; Alternatively you can use CRLfile ;CRLfile = /usr/local/stunnel/etc/stunnel/crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 ; Use it for client mode client = no ; Service-level configuration [pesitip] accept = 10443 connect = XXXXXXX:10016 Thanks for your help. Regards. Laurent UK Internet josealf(a)rocketmail.com 03/05/2011 14:52 Veuillez répondre à josealf(a)rocketmail.com Pour Laurent UK, stunnel-users-bounces(a)stunnel.org, stunnel-users(a)stunnel.org cc Objet Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, Can you post your configuration? For security, You should change the real IPs (but not the ports) before posting. You can check: 1. Does your stunnel client config has client=yes? 2. Does your stunnel server config has client=no 3. Check your packet flow, that is: your accept/connect settings. Regards Jose -----Original Message----- From: laurent.uk(a)bnpparibas.com Sender: stunnel-users-bounces(a)stunnel.org Date: Tue, 3 May 2011 14:16:09 To: <stunnel-users(a)stunnel.org> Subject: [stunnel-users] need help error :SSL3_GET_RECORD:wrong version number with cipher DES-CBC-SHA _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users This message and any attachments (the "message") is intended solely for the addressees and is confidential. If you receive this message in error, please delete it and immediately notify the sender. Any use not in accord with its purpose, any dissemination or disclosure, either whole or partial, is prohibited except formal approval. The internet can not guarantee the integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will) not therefore be liable for the message if modified. Do not print this message unless it is necessary, consider the environment. --------------------------------------------- Ce message et toutes les pieces jointes (ci-apres le "message") sont etablis a l'intention exclusive de ses destinataires et sont confidentiels. Si vous recevez ce message par erreur, merci de le detruire et d'en avertir immediatement l'expediteur. Toute utilisation de ce message non conforme a sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. L'internet ne permettant pas d'assurer l'integrite de ce message, BNP PARIBAS (et ses filiales) decline(nt) toute responsabilite au titre de ce message, dans l'hypothese ou il aurait ete modifie. N'imprimez ce message que si necessaire, pensez a l'environnement.

1 0

Re: [stunnel-users] Réf. : Re: need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA
by Jose Alf. 03 May '11

03 May '11

Laurent, I'm not sure you are connecting the dots right. I see an stunnel server configuration. In this case, your stunnel is a front-end to a service you run on host XXXX port 10016. What is that service? Is stunnel running on the same host? Note that If stunnel is not running on the same host with IP XXXX, then you may have some traffic in clear text in your network (from the device running stunnel to the device hosting the service on port 10016). You need a client to connect to the stunnel server. Unless your client support SSL natively, you also should have an stunnel running on your client device with entries like these: client=yes [pestip] accept = 10443 connect = Your-Stunnel-server-IP:10443 In this case your client apps connects locally to port 10443, traffic is encrypted and sent to your server listening on port 10443, where it is decripted and send to IP XXXX port 10016. Regards, Jose ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Tue, May 3, 2011 10:48:11 AM Subject: Réf. : Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Dear Jose, here is the configuration file of my stunnel : ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Please make sure you understand them (especially the effect of chroot jail) ; Certificate/key is needed in server mode and optional in client mode cert = /opt/freeware/etc/stunnel/ca_nopass.pem foreground = yes syslog = yes ; Protocol version (all, SSLv2, SSLv3, TLSv1) ;sslVersion = SSLv2 sslVersion = all ;ciphers = DES-CBC-SHA ;ciphers = DES-CBC3-SHA:IDEA-CBC-MD5 ; Some security enhancements for UNIX systems - comment them out on Win32 ;chroot = /usr/local/stunnel/var/lib/stunnel ;chroot = /tmp/ ;setuid = root ;setgid = other ; PID is created inside chroot jail pid = /var/adm/stunnel_server_level1.pid ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ;compression = rle ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ;options = Options_SSL ; Authentication stuff verify = 3 ; Don't forget to c_rehash CApath ; CApath is located inside chroot jail CApath = /opt/freeware/etc/stunnel/CA_files/ ; It's often easier to use CAfile ;CAfile = /opt/freeware/etc/stunnel/ca.pem ; Don't forget to c_rehash CRLpath ; CRLpath is located inside chroot jail ;CRLpath = /crls ; Alternatively you can use CRLfile ;CRLfile = /usr/local/stunnel/etc/stunnel/crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 ; Use it for client mode client = no ; Service-level configuration [pesitip] accept = 10443 connect = XXXXXXX:10016 Thanks for your help. Regards. Laurent UK Internet josealf(a)rocketmail.com 03/05/2011 14:52 Veuillez répondre à josealf(a)rocketmail.com Pour Laurent UK, stunnel-users-bounces(a)stunnel.org, stunnel-users(a)stunnel.org cc Objet Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, Can you post your configuration? For security, You should change the real IPs (but not the ports) before posting. You can check: 1. Does your stunnel client config has client=yes? 2. Does your stunnel server config has client=no 3. Check your packet flow, that is: your accept/connect settings. Regards Jose -----Original Message----- From: laurent.uk(a)bnpparibas.com Sender: stunnel-users-bounces(a)stunnel.org Date: Tue, 3 May 2011 14:16:09 To: <stunnel-users(a)stunnel.org> Subject: [stunnel-users] need help error :SSL3_GET_RECORD:wrong version number with cipher DES-CBC-SHA _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users This message and any attachments (the "message") is intended solely for the addressees and is confidential. If you receive this message in error, please delete it and immediately notify the sender. Any use not in accord with its purpose, any dissemination or disclosure, either whole or partial, is prohibited except formal approval. The internet can not guarantee the integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will) not therefore be liable for the message if modified. Do not print this message unless it is necessary, consider the environment. --------------------------------------------- Ce message et toutes les pieces jointes (ci-apres le "message") sont etablis a l'intention exclusive de ses destinataires et sont confidentiels. Si vous recevez ce message par erreur, merci de le detruire et d'en avertir immediatement l'expediteur. Toute utilisation de ce message non conforme a sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. L'internet ne permettant pas d'assurer l'integrite de ce message, BNP PARIBAS (et ses filiales) decline(nt) toute responsabilite au titre de ce message, dans l'hypothese ou il aurait ete modifie. N'imprimez ce message que si necessaire, pensez a l'environnement.

1 0

Re: [stunnel-users] Réf. : Re: need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA
by Leandro Avila 03 May '11

03 May '11

Hi, If you have control of both ends of the connection make sure your SSL version is consistent on both sides. I would not recomend using sslVersion = all Either set it to SSLv3 or TLSv1 DES-CBC-SHA is supported under those However, judging for the cipher you are choosing I assume you might be dealing with a legacy application and you might not have access to both ends of the connection. I would try setting only one version at the time and moving down from TLSv1, SSLv3 and SSLv2 sslVersion = ciphers = DES-CBC-SHA Cheers ----------------- Leandro Avila ________________________________ From: "laurent.uk(a)bnpparibas.com" <laurent.uk(a)bnpparibas.com> To: josealf(a)rocketmail.com Cc: stunnel-users(a)stunnel.org; stunnel-users-bounces(a)stunnel.org Sent: Tuesday, May 3, 2011 10:48 AM Subject: [stunnel-users] Réf. : Re: need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Dear Jose, here is the configuration file of my stunnel : ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Please make sure you understand them (especially the effect of chroot jail) ; Certificate/key is needed in server mode and optional in client mode cert = /opt/freeware/etc/stunnel/ca_nopass.pem foreground = yes syslog = yes ; Protocol version (all, SSLv2, SSLv3, TLSv1) ;sslVersion = SSLv2 sslVersion = all ;ciphers = DES-CBC-SHA ;ciphers = DES-CBC3-SHA:IDEA-CBC-MD5 ; Some security enhancements for UNIX systems - comment them out on Win32 ;chroot = /usr/local/stunnel/var/lib/stunnel ;chroot = /tmp/ ;setuid = root ;setgid = other ; PID is created inside chroot jail pid = /var/adm/stunnel_server_level1.pid ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ;compression = rle ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ;options = Options_SSL ; Authentication stuff verify = 3 ; Don't forget to c_rehash CApath ; CApath is located inside chroot jail CApath = /opt/freeware/etc/stunnel/CA_files/ ; It's often easier to use CAfile ;CAfile = /opt/freeware/etc/stunnel/ca.pem ; Don't forget to c_rehash CRLpath ; CRLpath is located inside chroot jail ;CRLpath = /crls ; Alternatively you can use CRLfile ;CRLfile = /usr/local/stunnel/etc/stunnel/crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 ; Use it for client mode client = no ; Service-level configuration [pesitip] accept = 10443 connect = XXXXXXX:10016 Thanks for your help. Regards. Laurent UK Internet josealf(a)rocketmail.com 03/05/2011 14:52 Veuillez répondre à josealf(a)rocketmail.com Pour Laurent UK, stunnel-users-bounces(a)stunnel.org, stunnel-users(a)stunnel.org cc Objet Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA Laurent, Can you post your configuration? For security, You should change the real IPs (but not the ports) before posting. You can check: 1. Does your stunnel client config has client=yes? 2. Does your stunnel server config has client=no 3. Check your packet flow, that is: your accept/connect settings. Regards Jose -----Original Message----- From: laurent.uk(a)bnpparibas.com Sender: stunnel-users-bounces(a)stunnel.org Date: Tue, 3 May 2011 14:16:09 To: <stunnel-users(a)stunnel.org> Subject: [stunnel-users] need help error :SSL3_GET_RECORD:wrong version number with cipher DES-CBC-SHA _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users This message and any attachments (the "message") is intended solely for the addressees and is confidential. If you receive this message in error, please delete it and immediately notify the sender. Any use not in accord with its purpose, any dissemination or disclosure, either whole or partial, is prohibited except formal approval. The internet can not guarantee the integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will) not therefore be liable for the message if modified. Do not print this message unless it is necessary, consider the environment. --------------------------------------------- Ce message et toutes les pieces jointes (ci-apres le "message") sont etablis a l'intention exclusive de ses destinataires et sont confidentiels. Si vous recevez ce message par erreur, merci de le detruire et d'en avertir immediatement l'expediteur. Toute utilisation de ce message non conforme a sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. L'internet ne permettant pas d'assurer l'integrite de ce message, BNP PARIBAS (et ses filiales) decline(nt) toute responsabilite au titre de ce message, dans l'hypothese ou il aurait ete modifie. N'imprimez ce message que si necessaire, pensez a l'environnement. _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users

1 0

stunnel 4.36 released
by Michal Trojnara 03 May '11

03 May '11

Dear Users, Version 4.36 of stunnel was released. The ChangeLog entry: Version 4.36, 2011.05.03, urgency: LOW: * New features - Updated Win32 DLLs for OpenSSL 1.0.0d. - Dynamic memory management for strings manipulation: no more static STRLEN limit, lower stack footprint. - Strict public key comparison added for "verify = 3" certificate checking mode (thx to Philipp Hartwig). - Backlog parameter of listen(2) changed from 5 to SOMAXCONN: improved behavior on heavy load. - Example tools/stunnel.service file added for systemd service manager. * Bugfixes - Missing pthread_attr_destroy() added to fix memory leak (thx to Paul Allex and Peter Pentchev). - Fixed the incorrect way of setting FD_CLOEXEC flag. - Fixed --enable-libwrap option of ./configure script. - /opt/local added to OpenSSL search path for MacPorts compatibility. - Workaround implemented for signal handling on MacOS X. - A trivial bug fixed in the stunnel.init script. - Retry implemented on EAI_AGAIN error returned by resolver calls. Home page: http://www.stunnel.org/ Download: ftp://ftp.stunnel.org/stunnel/ SHA-256 hash for stunnel-4.36.tar.gz: 3483fc2011e8a9d2614a93a9dbf7eabf405044df3566f29144fe2d1dd37a35f5 Best regards, Mike

3 2

Re: [stunnel-users] need help error :SSL3_GET_RECORD:wrong versionnumber with cipher DES-CBC-SHA
by josealf＠rocketmail.com 03 May '11

03 May '11

Laurent, Can you post your configuration? For security, You should change the real IPs (but not the ports) before posting. You can check: 1. Does your stunnel client config has client=yes? 2. Does your stunnel server config has client=no 3. Check your packet flow, that is: your accept/connect settings. Regards Jose -----Original Message----- From: laurent.uk(a)bnpparibas.com Sender: stunnel-users-bounces(a)stunnel.org Date: Tue, 3 May 2011 14:16:09 To: <stunnel-users(a)stunnel.org> Subject: [stunnel-users] need help error :SSL3_GET_RECORD:wrong version number with cipher DES-CBC-SHA _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users

1 0

Re: [stunnel-users] Temporary failure in name resolution (Michal Trojnara)
by Phil Wieland 29 Apr '11

29 Apr '11

I attach two strace reports, strace-good shows a successful use, strace-bad shows it failing after a reboot. In both cases I just telnet to localhost 55899, which gives the smtp server's banner in the good case. ltrace craps out with a [pid 1107] +++ killed by SIGTRAP +++ in both cases, and doesn't show anything useful. These are WITHOUT the suggested patch, I am not really equipped for building on this server. Phil

2 1

Re: [stunnel-users] Réf. : Re: Tr : Réf. : Re: Need some informations about stunnel(AC,?crl ?files)
by Ludolf Holzheid 29 Apr '11

29 Apr '11

On Fri, 2011-04-29 15:39:45 +0200, laurent.uk(a)bnpparibas.com wrote: > Dear Ludolf thank you for your response. > > I have another question. > > Is it possible to have 2 stunnel running on the same server? > > 1 stunnel with no client's certificate verification (verify = 0) with a > specific port > > and 1 stunnel with client's certificate verification (verify = 3) with > other specific port You may run as many instances of stunnel as you like, as long as they don't share listening ports (accept=...) or pid files (pid=...). Ludolf -- --------------------------------------------------------------- Ludolf Holzheid Tel: +49 621 339960 Bihl+Wiedemann GmbH Fax: +49 621 3392239 Floßwörthstraße 41 e-mail: lholzheid(a)bihl-wiedemann.de D-68199 Mannheim, Germany ---------------------------------------------------------------

1 0

Re: [stunnel-users] Tr : Réf. : Re: Need some informations about stunnel (AC,?crl?files)
by Ludolf Holzheid 28 Apr '11

28 Apr '11

On Thu, 2011-04-28 17:06:28 +0200, laurent.uk(a)bnpparibas.com wrote: > Dear Ludolf i need some help with the verify option. > > I want to check the certificate client in my machine and also check if the > certificate's client is in the crl list. > > You said that " > If you are using verify=3, stunnel checks client certificates against > the set of certificates in CApath or CAfile, not against CAs and CRLs." > > Is it possible to check client certificates with certificates in CaPath > and also with CRls? Laurent, By installing a certificate (to CApath or CAfile), you express your trust in the certificate. For the client certificates, you could either o implicitly trust all certificates signed by an installed CA certificate and not yet revoked (verify=2), or o explicitly trust installed client certificates (verify=3). In both cases, all installed certificates are fully trusted. Cross-checking a trusted (client-) certificate against an other trusted (CA-) certificate does not raise security or trustworthiness. In order to revoke a client certificate in verify=3 mode, just uninstall it. Ludolf -- --------------------------------------------------------------- Ludolf Holzheid Tel: +49 621 339960 Bihl+Wiedemann GmbH Fax: +49 621 3392239 Floßwörthstraße 41 e-mail: lholzheid(a)bihl-wiedemann.de D-68199 Mannheim, Germany ---------------------------------------------------------------

1 0

Delay before sending server hello
by Dan Price 28 Apr '11

28 Apr '11

I am using stunnel to accept TLS connections. I'm opening eight connections at virtually the same time, and occasionally see that for one of the connections, the handshake does not complete - stunnel does not send the server hello, and the client usually resets the connection. I did manage to capture one instance where stunnel sends the server hello, but it is delayed by over a minute. I upgraded to version 4.35, and I see the same behavior. I set debug=debug, and captured what I think are the relevant logs (through write server hello). I kept the logs for the successful connection (59924) that came in after the failed one (59923). Apr 27 13:21:22 cm stunnel: LOG7[10357:1431918272]: local socket: FD=15 allocated (non-blocking mode) Apr 27 13:21:22 cm stunnel: LOG7[10357:1431918272]: Service msrp accepted FD=15 from ::ffff:10.50.2.11:59923 Apr 27 13:21:22 cm stunnel: LOG7[10357:1431918272]: local socket: FD=16 allocated (non-blocking mode) Apr 27 13:21:22 cm stunnel: LOG7[10357:1431918272]: Service msrp accepted FD=16 from ::ffff:10.50.2.11:59924 Apr 27 13:21:22 cm stunnel: LOG7[10357:1431989136]: Service msrp started Apr 27 13:21:22 cm stunnel: LOG7[10357:1431989136]: Waiting for a libwrap process Apr 27 13:21:22 cm stunnel: LOG7[10357:1433471888]: Service msrp started Apr 27 13:21:22 cm stunnel: LOG7[10357:1433471888]: Waiting for a libwrap process Apr 27 13:21:22 cm stunnel: LOG7[10357:1433471888]: Acquired libwrap process #1 Apr 27 13:21:22 cm stunnel: LOG7[10357:1433471888]: Releasing libwrap process #1 Apr 27 13:21:22 cm stunnel: LOG7[10357:1433471888]: Released libwrap process #1 Apr 27 13:21:22 cm stunnel: LOG7[10357:1433471888]: Service msrp permitted by libwrap from ::ffff:10.50.2.11:59924 Apr 27 13:21:22 cm stunnel: LOG5[10357:1433471888]: Service msrp accepted connection from ::ffff:10.50.2.11:59924 Apr 27 13:21:22 cm stunnel: LOG7[10357:1433471888]: SSL state (accept): before/accept initialization Apr 27 13:21:22 cm stunnel: LOG7[10357:1433471888]: SSL state (accept): SSLv3 read client hello A Apr 27 13:21:22 cm stunnel: LOG7[10357:1433471888]: SSL state (accept): SSLv3 write server hello A Apr 27 13:22:38 cm stunnel: LOG7[10357:1431989136]: Acquired libwrap process #4 Apr 27 13:22:38 cm stunnel: LOG7[10357:1431989136]: Releasing libwrap process #4 Apr 27 13:22:38 cm stunnel: LOG7[10357:1431989136]: Released libwrap process #4 Apr 27 13:22:38 cm stunnel: LOG7[10357:1431989136]: Service msrp permitted by libwrap from ::ffff:10.50.2.11:59923 Apr 27 13:22:38 cm stunnel: LOG5[10357:1431989136]: Service msrp accepted connection from ::ffff:10.50.2.11:59923 Apr 27 13:22:38 cm stunnel: LOG7[10357:1431989136]: SSL state (accept): before/accept initialization Apr 27 13:22:38 cm stunnel: LOG7[10357:1431989136]: SSL state (accept): SSLv3 read client hello A Apr 27 13:22:38 cm stunnel: LOG7[10357:1431989136]: SSL state (accept): SSLv3 write server hello A Thanks, Dan

1 0

Does stunnel support startTLS?
by Markus Borst 28 Apr '11

28 Apr '11

Stunnel supports encryption in the "old" ssl style extra port configuration (i.e. imaps on port 993) where the encryption is negotiated immediately upon start of the connection. Does stunnel also support the startTLS method? i.e. a clear text connection is established (imap on port 143) and one of the first imap commands is startTLS, which negotiates the encryption and protects the connection from that time onwards. I know that supporting startTLS is a lot harder, since it means sniffing commands in the higher level protocol, but we need it nevertheless. (In fact, our imap server does support startTLS, but it does _not_ support importing an external certificate, which is why I'm looking for an external solution.) From reading the documentation I'm not sure whether stunnel supports startTLS, there are a few option descriptions which might point to startTLS, but I'm not sure. Anybody knows the definite answer? Greetings Markus Borst -- TU Darmstadt Hochschulrechenzentrum (HRZ) Markus Borst Adresse: Petersenstrasse 30, 64287 Darmstadt, Germany Tel.: 06151/16-2056 Email: M.Borst(a)hrz.tu-darmstadt.de

2 3

Re: [stunnel-users] Stunnel stuck at SSL state (accept): before/accept initialization
by Jack Liu 27 Apr '11

27 Apr '11

Thx for continuing reply my msg, Yes, there is var/log/messages Inside there only has some iptables log, FTP, SMTP application log and nothing else. I am positive that this problem is not cause by iptables, becuase I tried with iptables off. Nothing else related to stunnel is found in that folder. Any other suggestions? Mr. Jack > From: sunyucong(a)gmail.com > Date: Mon, 25 Apr 2011 20:00:30 -0700 > Subject: Re: [stunnel-users] Stunnel stuck at SSL state (accept): before/accept initialization > To: jackliu92(a)hotmail.com > CC: stunnel-users(a)stunnel.org > > I guess in centos that's /var/log/messages > but in general, you should probably check everything in /var/log to make sure. > > On Mon, Apr 25, 2011 at 5:38 PM, Jack Liu <jackliu92(a)hotmail.com> wrote: > > Thank you for helping, but both logs r not presented in my var/log/ dir. Any > > other suggestions? > > > > > > Mr. Jack > > > > > > > > > > > >> From: sunyucong(a)gmail.com > >> Date: Mon, 25 Apr 2011 16:25:20 -0700 > >> Subject: Re: [stunnel-users] Stunnel stuck at SSL state (accept): > >> before/accept initialization > >> To: jackliu92(a)hotmail.com > >> CC: stunnel-users(a)stunnel.org > >> > >> Are you sure that's entire log? check /var/log/daemons.log and > >> syslog.log as well. > >> > >> On Sun, Apr 24, 2011 at 1:30 AM, Jack Liu <jackliu92(a)hotmail.com> wrote: > >> > It anyone knows how to fix Stunnel stuck at SSL state (accept): > >> > before/accept initialization??? > >> > > >> > Here is the log: > >> > > >> > ----------------------------------------------------------------------------------------------------------- > >> > [root@vps1 ~]#stunnel /etc/stunnel/stunnel.conf > >> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Snagged 64 random bytes from > >> > /root/.rnd > >> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Wrote 1024 new random bytes > >> > to > >> > /root/.rnd > >> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: RAND_status claims > >> > sufficient > >> > entropy for the PRNG > >> > 2011.04.24 02:25:13 LOG6[32174:3085993680]: PRNG seeded successfully > >> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Certificate: > >> > /etc/stunnel/stunnel.pem > >> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Key file: > >> > /etc/stunnel/stunnel.pem > >> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Verify directory set to > >> > /etc/stunnel/CA > >> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: CRL directory set to > >> > /etc/stunnel/CRL > >> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: SSL context initialized for > >> > service 3proxy > >> > 2011.04.24 02:25:13 LOG5[32174:3085993680]: stunnel 4.15 on > >> > i686-redhat-linux-gnu with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 > >> > 2011.04.24 02:25:13 LOG5[32174:3085993680]: Threading:PTHREAD SSL:ENGINE > >> > Sockets:POLL,IPv6 Auth:LIBWRAP > >> > 2011.04.24 02:25:13 LOG6[32174:3085993680]: file ulimit = 1024 (can be > >> > changed with 'ulimit -n') > >> > 2011.04.24 02:25:13 LOG6[32174:3085993680]: poll() used - no FD_SETSIZE > >> > limit for file descriptors > >> > 2011.04.24 02:25:13 LOG5[32174:3085993680]: 500 clients allowed > >> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: FD 3 in non-blocking mode > >> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: FD 4 in non-blocking mode > >> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: FD 5 in non-blocking mode > >> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: SO_REUSEADDR option set on > >> > accept socket > >> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: 3proxy bound to > >> > 0.0.0.0:30001 > >> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Created pid file > >> > /var/run/stunnel.pid > >> > 2011.04.24 02:25:20 LOG7[32174:3085993680]: 3proxy accepted FD=6 from > >> > xx.xxx.xxx.xx:41165 > >> > 2011.04.24 02:25:20 LOG7[32174:3085990800]: 3proxy started > >> > 2011.04.24 02:25:20 LOG7[32174:3085990800]: FD 6 in non-blocking mode > >> > 2011.04.24 02:25:20 LOG7[32174:3085990800]: FD 7 in non-blocking mode > >> > 2011.04.24 02:25:20 LOG7[32174:3085990800]: FD 8 in non-blocking mode > >> > 2011.04.24 02:25:20 LOG7[32174:3085993680]: Cleaning up the signal pipe > >> > 2011.04.24 02:25:20 LOG6[32174:3085993680]: Child process 32176 finished > >> > with code 0 > >> > 2011.04.24 02:25:20 LOG7[32174:3085990800]: Connection from > >> > xx.xxx.xxx.xx:41165 permitted by libwrap > >> > 2011.04.24 02:25:20 LOG5[32174:3085990800]: 3proxy connected from > >> > xx.xxx.xxx.xx:41165 > >> > 2011.04.24 02:25:20 LOG7[32174:3085990800]: SSL state (accept): > >> > before/accept initialization <-----------------------Stuck here > >> > forever!!! > >> > 2011.04.24 02:25:22 LOG3[32174:3085990800]: SSL_accept: Peer suddenly > >> > disconnected > >> > 2011.04.24 02:25:22 LOG5[32174:3085990800]: Connection reset: 0 bytes > >> > sent > >> > to SSL, 0 bytes sent to socket > >> > 2011.04.24 02:25:22 LOG7[32174:3085990800]: 3proxy finished (0 left) > >> > 2011.04.24 02:25:25 LOG3[32174:3085993680]: Received signal 2; > >> > terminating > >> > 2011.04.24 02:25:25 LOG7[32174:3085993680]: removing pid file > >> > /var/run/stunnel.pid > >> > [root@vps1 ~]# > >> > > >> > ----------------------------------------------------------------------------------------------------------- > >> > stunnel.conf: > >> > cert = /etc/stunnel/stunnel.pem > >> > key = /etc/stunnel/stunnel.pem > >> > CApath = /etc/stunnel/CA > >> > CRLpath = /etc/stunnel/CRL > >> > debug = 7 > >> > foreground = yes > >> > verify = 1 > >> > # > >> > [3proxy] > >> > accept = 30001 > >> > connect = 127.0.0.1:33135 > >> > > >> > ----------------------------------------------------------------------------------------------------------- > >> > > >> > I am hosting with CentOS 5.5, and installed Stunnel via yum. > >> > Planning to use it with 3Proxy. However I experience the problem above, > >> > can > >> > someone please help with that? > >> > Thank you very much! > >> > > >> > > >> > > >> > Mr. Jack > >> > > >> > _______________________________________________ > >> > stunnel-users mailing list > >> > stunnel-users(a)stunnel.org > >> > http://stunnel.mirt.net/mailman/listinfo/stunnel-users > >> > > >> > > >

3 6

Patch to enhance verify=3 with SHA-1 check
by Philipp Hartwig 27 Apr '11

27 Apr '11

As indicated in a previous mail to this list I was surprised by the following behavior: With "verify=3" stunnel doesn't compare the peer's certificate with the locally installed certificate for actual equality but it only checks whether they have the same subject. The recent Comodo incident[1] has shown that it is not impossible to get a certificate which matches the subject of the certificate of some interesting server and is signed by a trusted CA. That's why I was interested in a stricter form of verification (at least in client mode). I have attached a small patch, derived from code in the file "mutt_ssl.c" of the Mutt[2] mail client, which adds a check for equality of SHA-1 hashes to the "verify=3" certificate check. I mainly wrote it for personal use but maybe someone else will find it useful or has some comments. Regards, Philipp [1] http://blog.mozilla.com/security/2011/03/25/comodo-certificate-issue-follow… [2] http://www.mutt.org/

1 0

Re: [stunnel-users] Réf. : Re: Need some informations about stunnel (AC,?crl?files)
by Ludolf Holzheid 27 Apr '11

27 Apr '11

On Wed, 2011-04-27 13:06:43 +0200, laurent.uk(a)bnpparibas.com wrote: > Dear ludolf thanks you for your response. > > So if i use verify = 3, the crl files is useless. > > I went to the url http://crl.verisign.com , and there were a lot of files. > > what are the files corresponding of the crl list please? Those with the ".crl" extension, I suppose ;-) You'll need to look for the CRLs matching the certificates you want to use. Note, there may be CRLs for intermediate certificates too. At least (the randomly selected) Class3SoftwarePublishers.crl seems to be in DES format, you might have to convert it to PEM for use with stunnel. Ludolf -- --------------------------------------------------------------- Ludolf Holzheid Tel: +49 621 339960 Bihl+Wiedemann GmbH Fax: +49 621 3392239 Floßwörthstraße 41 e-mail: lholzheid(a)bihl-wiedemann.de D-68199 Mannheim, Germany ---------------------------------------------------------------

1 0

Re: [stunnel-users] Need some informations about stunnel (AC, crl files)
by Ludolf Holzheid 27 Apr '11

27 Apr '11

On Wed, 2011-04-27 10:47:42 +0200, laurent.uk(a)bnpparibas.com wrote: > Hi all, > > I need some informations about stunnel. > > First, when the client's software use a certificate signed by a CA like > veriSign. Did we need to add the certificates of this CA? or it is not > neccessary because it is a knowned CA. If you are using verify=3, stunnel checks client certificates against the set of certificates in CApath or CAfile, not against CAs and CRLs. In order to have stunnel check the certificate chain of client certificates, you'll have to use verify=2. For that, stunnel needs access to the CA's root certificate and the intermediate certificates (i.e. they have to be locally installed to CApath/CAfile). > Secondally, i need to download and update the crl files, and also (if it's > possible) the certificates of knowed CA. How can i do that in my AIX's > machine please? This depends on the way the CA publishes its certificates and CRLs. For VeriSign, my first idea is to use wget to download them from http://crl.verisign.com. There may be better ways, though. And I don't know AIX. Ludolf -- --------------------------------------------------------------- Ludolf Holzheid Tel: +49 621 339960 Bihl+Wiedemann GmbH Fax: +49 621 3392239 Floßwörthstraße 41 e-mail: lholzheid(a)bihl-wiedemann.de D-68199 Mannheim, Germany ---------------------------------------------------------------

1 0

Re: [stunnel-users] need help for the error VERIFY ERROR ONLY MY: no cert fo (verify = 3)
by Ludolf Holzheid 26 Apr '11

26 Apr '11

On Tue, 2011-04-26 17:00:06 +0200, laurent.uk(a)bnpparibas.com wrote: > Hi, > > I tried to configure my STUNNEL server, with my client's software test but > i always have the the following error : > > 2011.04.26 14:23:09 LOG4[1683500:258]: VERIFY ERROR ONLY MY: no cert for > /C=ww/O=swift/OU=personalid/OU=bnpafrpp/CN=crl-3skey-ebics-ts > > [..] > > I tried to extract the public certificate from the crl-3skey-ebics-ts and > add it in the keystore and in the folder /usr/local/ssl/certs/trusted/ > > [..] > > verify = 3 > ; Don't forget to c_rehash CApath > ; CApath is located inside chroot jail > ;CApath = /opt/freeware/etc/stunnel/ > ; It's often easier to use CAfile > CAfile = /opt/freeware/etc/stunnel/ca.pem > ; Don't forget to c_rehash CRLpath Laurent, If you specify a CAfile in 'verify=3' mode, you need to add the client's certificates to this file. You could also store the client's certificates in PEM format files (one file per certificate) in a directory stunnel can reach at connection time. You have to specify the name of this directory as CApath then (in contrast to CAfile), and you'll have to run c_rehash on this directory. Ludolf -- --------------------------------------------------------------- Ludolf Holzheid Tel: +49 621 339960 Bihl+Wiedemann GmbH Fax: +49 621 3392239 Floßwörthstraße 41 e-mail: lholzheid(a)bihl-wiedemann.de D-68199 Mannheim, Germany ---------------------------------------------------------------

1 0

Temporary failure in name resolution
by Phil Wieland 26 Apr '11

26 Apr '11

I think I've done something stupid but I can't work out what. I'm running stunnel4 version 4.29 on an Ubuntu server box, using it to tunnel smtp connections to my ISP's mail server. Everything works perfectly until I reboot the server, when it stops working. In syslog, I get: Apr 24 15:56:11 friedbread stunnel: LOG5[1101:3074997104]: ssmtp accepted connection from 127.0.0.1:50681 Apr 24 15:56:11 friedbread stunnel: LOG3[1101:3074997104]: Error resolving 'smtp.blueyonder.co.uk': Temporary failure in name resolution (EAI_AGAIN) Apr 24 15:56:11 friedbread stunnel: LOG3[1101:3074997104]: No host resolved Apr 24 15:56:11 friedbread stunnel: LOG5[1101:3074997104]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket every time I attempt to send mail. I can ping smtp.blueyonder.co.uk no problem. The problem persists until I restart stunnel4, after which it works perfectly for weeks on end. Looking at syslog for boot time, it looks like stunnel tries to resolve smtp.blueyonder.co.uk as soon as it starts, but dhcp hasn't finished at this time so it fails. It seems to cache something from the failure and not try again? Even though the error is "Temporary". All advice gratefully received. Phil Wieland Liverpool, UK. ###@friedbread:~$ stunnel4 -version stunnel 4.29 on i486-pc-linux-gnu with OpenSSL 0.9.8k 25 Mar 2009 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /var/run/stunnel4.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = /etc/stunnel/stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none ###@friedbread:~$ cat /etc/stunnel/stunnel.conf ; Sample stunnel configuration file by Michal Trojnara 2002-2009 ; Some options used here may not be adequate for your particular configuration ; Please make sure you understand them (especially the effect of the chroot jail) ; Certificate/key is needed in server mode and optional in client mode cert = /etc/ssl/certs/stunnel.pem ;key = /etc/ssl/certs/stunnel.pem ; Protocol version (all, SSLv2, SSLv3, TLSv1) sslVersion = SSLv3 ; Some security enhancements for UNIX systems - comment them out on Win32 chroot = /var/lib/stunnel4/ setuid = stunnel4 setgid = stunnel4 ; PID is created inside the chroot jail pid = /stunnel4.pid ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ;compression = zlib ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ; CApath is located inside chroot jail ;CApath = /certs ; It's often easier to use CAfile ;CAfile = /etc/stunnel/certs.pem ; Don't forget to c_rehash CRLpath ; CRLpath is located inside chroot jail ;CRLpath = /crls ; Alternatively you can use CRLfile ;CRLfile = /etc/stunnel/crls.pem ; Some debugging stuff useful for troubleshooting ;debug = 7 ;output = /var/log/stunnel4/stunnel.log ; Use it for client mode client = yes ; Service-level configuration ;[pop3s] ;accept = 995 ;connect = 110 ;[imaps] ;accept = 993 ;connect = 143 [ssmtp] accept = 55899 connect = smtp.blueyonder.co.uk:465 ;[https] ;accept = 443 ;connect = 80 ;TIMEOUTclose = 0 ; vim:ft=dosini ###@friedbread:~$

3 2

Re: [stunnel-users] Stunnel stuck at SSL state (accept): before/accept initialization
by Jack Liu 25 Apr '11

25 Apr '11

Thank you for helping, but both logs r not presented in my var/log/ dir. Any other suggestions? Mr. Jack > From: sunyucong(a)gmail.com > Date: Mon, 25 Apr 2011 16:25:20 -0700 > Subject: Re: [stunnel-users] Stunnel stuck at SSL state (accept): before/accept initialization > To: jackliu92(a)hotmail.com > CC: stunnel-users(a)stunnel.org > > Are you sure that's entire log? check /var/log/daemons.log and > syslog.log as well. > > On Sun, Apr 24, 2011 at 1:30 AM, Jack Liu <jackliu92(a)hotmail.com> wrote: > > It anyone knows how to fix Stunnel stuck at SSL state (accept): > > before/accept initialization??? > > > > Here is the log: > > ----------------------------------------------------------------------------------------------------------- > > [root@vps1 ~]#stunnel /etc/stunnel/stunnel.conf > > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Snagged 64 random bytes from > > /root/.rnd > > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Wrote 1024 new random bytes to > > /root/.rnd > > 2011.04.24 02:25:13 LOG7[32174:3085993680]: RAND_status claims sufficient > > entropy for the PRNG > > 2011.04.24 02:25:13 LOG6[32174:3085993680]: PRNG seeded successfully > > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Certificate: > > /etc/stunnel/stunnel.pem > > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Key file: > > /etc/stunnel/stunnel.pem > > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Verify directory set to > > /etc/stunnel/CA > > 2011.04.24 02:25:13 LOG7[32174:3085993680]: CRL directory set to > > /etc/stunnel/CRL > > 2011.04.24 02:25:13 LOG7[32174:3085993680]: SSL context initialized for > > service 3proxy > > 2011.04.24 02:25:13 LOG5[32174:3085993680]: stunnel 4.15 on > > i686-redhat-linux-gnu with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 > > 2011.04.24 02:25:13 LOG5[32174:3085993680]: Threading:PTHREAD SSL:ENGINE > > Sockets:POLL,IPv6 Auth:LIBWRAP > > 2011.04.24 02:25:13 LOG6[32174:3085993680]: file ulimit = 1024 (can be > > changed with 'ulimit -n') > > 2011.04.24 02:25:13 LOG6[32174:3085993680]: poll() used - no FD_SETSIZE > > limit for file descriptors > > 2011.04.24 02:25:13 LOG5[32174:3085993680]: 500 clients allowed > > 2011.04.24 02:25:13 LOG7[32174:3085993680]: FD 3 in non-blocking mode > > 2011.04.24 02:25:13 LOG7[32174:3085993680]: FD 4 in non-blocking mode > > 2011.04.24 02:25:13 LOG7[32174:3085993680]: FD 5 in non-blocking mode > > 2011.04.24 02:25:13 LOG7[32174:3085993680]: SO_REUSEADDR option set on > > accept socket > > 2011.04.24 02:25:13 LOG7[32174:3085993680]: 3proxy bound to 0.0.0.0:30001 > > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Created pid file > > /var/run/stunnel.pid > > 2011.04.24 02:25:20 LOG7[32174:3085993680]: 3proxy accepted FD=6 from > > xx.xxx.xxx.xx:41165 > > 2011.04.24 02:25:20 LOG7[32174:3085990800]: 3proxy started > > 2011.04.24 02:25:20 LOG7[32174:3085990800]: FD 6 in non-blocking mode > > 2011.04.24 02:25:20 LOG7[32174:3085990800]: FD 7 in non-blocking mode > > 2011.04.24 02:25:20 LOG7[32174:3085990800]: FD 8 in non-blocking mode > > 2011.04.24 02:25:20 LOG7[32174:3085993680]: Cleaning up the signal pipe > > 2011.04.24 02:25:20 LOG6[32174:3085993680]: Child process 32176 finished > > with code 0 > > 2011.04.24 02:25:20 LOG7[32174:3085990800]: Connection from > > xx.xxx.xxx.xx:41165 permitted by libwrap > > 2011.04.24 02:25:20 LOG5[32174:3085990800]: 3proxy connected from > > xx.xxx.xxx.xx:41165 > > 2011.04.24 02:25:20 LOG7[32174:3085990800]: SSL state (accept): > > before/accept initialization <-----------------------Stuck here > > forever!!! > > 2011.04.24 02:25:22 LOG3[32174:3085990800]: SSL_accept: Peer suddenly > > disconnected > > 2011.04.24 02:25:22 LOG5[32174:3085990800]: Connection reset: 0 bytes sent > > to SSL, 0 bytes sent to socket > > 2011.04.24 02:25:22 LOG7[32174:3085990800]: 3proxy finished (0 left) > > 2011.04.24 02:25:25 LOG3[32174:3085993680]: Received signal 2; terminating > > 2011.04.24 02:25:25 LOG7[32174:3085993680]: removing pid file > > /var/run/stunnel.pid > > [root@vps1 ~]# > > ----------------------------------------------------------------------------------------------------------- > > stunnel.conf: > > cert = /etc/stunnel/stunnel.pem > > key = /etc/stunnel/stunnel.pem > > CApath = /etc/stunnel/CA > > CRLpath = /etc/stunnel/CRL > > debug = 7 > > foreground = yes > > verify = 1 > > # > > [3proxy] > > accept = 30001 > > connect = 127.0.0.1:33135 > > ----------------------------------------------------------------------------------------------------------- > > > > I am hosting with CentOS 5.5, and installed Stunnel via yum. > > Planning to use it with 3Proxy. However I experience the problem above, can > > someone please help with that? > > Thank you very much! > > > > > > > > Mr. Jack > > > > _______________________________________________ > > stunnel-users mailing list > > stunnel-users(a)stunnel.org > > http://stunnel.mirt.net/mailman/listinfo/stunnel-users > > > >

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users