- stunnel-users - stunnel.org

Getting Stunnel to Work Under Windows 7 64-bit
by Thomas Eifert 03 May '12

03 May '12

For the benefit of the group, I thought I'd share some experiences I had when attempting to get Stunnel to run under Windows 7 SP1 64-bit. I initially installed Stunnel version 4.53 to the default location, which in Windows 7 64-bit is: C:\Program Files (x86)\stunnel\ I installed the service from the start menu option, then rebooted my machine. I have administrator rights, and User Account Control is disabled. My observations included the following: 1. The Stunnel status window displayed only configuration loads. No output from any active connection was ever displayed, despite the fact that Stunnel was passing traffic to/from SSL-enabled servers. 2. Stunnel would not write to the log file. The error message indicated that Stunnel was unable to open stunnel.log. Initially, I thought this might be a factor in the lack of status window connection output, so I commented the log statement out to eliminate it. I then reloaded the configuration. The issue of not seeing any connection info was unaffected. 3. The notification area icon would not appear on Stunnel service load. It would mysteriously appear, then disappear, at seemingly random times. 4. Once the service was installed, it was not possible to stop it or uninstall it from the provided start menu shortcuts. Whenever I attempted to do so, the Stunnel status window would appear. However, I was able to perform these actions successfully by opening a command prompt, then issuing the commands from there. In an effort to unravel these issues, I tried the following workarounds: 1. I re-installed stunnel to a non-system controlled directory. In my case, it was C:\Apps\stunnel\. 2. I attempted to run stunnel in compatibility mode, set for Windows XP SP3. 3. I tried installing 2 previous versions of Stunnel. All combinations produced exactly the same undesired result. Finally, I stopped and uninstalled the service. Instead of using that method, I created a shortcut to stunnel.exe, and placed it in the start menu's startup folder, then rebooted. Stunnel started at boot time, and all of the above issues were resolved. As such, it seems like Stunnel just doesn't like to be run as a service on a Windows 7 64-bit machine; at least not on the one I own. If you're encountering any stability issues with the Stunnel service in the Windows 7 64-bit environment, try my method. It works. I'd like to extend a special thank you to Carter Browne, who provided valuable input throughout the course of my testing. Regards, Thomas -- Attention: This message and all attachments are private and may contain information that is confidential and privileged. If you received this message in error, please notify the sender by reply email and delete the message immediately.

2 2

ssl3 handshake error
by Colin Chalmers 28 Apr '12

28 Apr '12

Hi all, I'm pretty new to stunnel but did get this config to work on a linux box - now I am trying the same/similiar config on a win7 box but keep getting the handshake error below. I am using the latest version of stunnel and have tried searching for an answer via google, making the proposed changes as described No matter what settings I use it always seems to use the sslv3 handshake which then goes wrong :-( I'd appreciate any help on this Colin My config is as follows: ; ************************************************************************** ; * Global options * ; ************************************************************************** ; Debugging stuff (may useful for troubleshooting) ; Some debugging stuff useful for troubleshooting debug = 7 output = c:\temp\stunnel.log ; Use it for client mode client = yes rndbytes = 256 rndfile = c:\temp\randseed.bin ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Disable FIPS mode to allow non-approved protocols and algorithms fips = no ; ************************************************************************** ; * Service defaults may also be specified in individual service sections * ; ************************************************************************** ; Certificate/key is needed in server mode and optional in client mode cert = CT_20110324.pem ; Disable support for insecure SSLv2 protocol sslVersion = TLSv1 options = NO_SSLv2 options = NO_SSLv3 [CT] ; incoming connection from the client application accept = 444 ; outgoing connection connect = remote.server.com:443 TIMEOUTclose = 0 Error in log file 2012.04.11 18:33:54 LOG7[3684:3640]: Remote socket (FD=440) initialized 2012.04.11 18:33:54 LOG3[3684:3640]: SSL_connect: 14094410: error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure 2012.04.11 18:33:54 LOG5[3684:3640]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2012.04.11 18:33:54 LOG7[3684:3640]: Remote socket (FD=440) closed 2012.04.11 18:33:54 LOG7[3684:3640]: Local socket (FD=408) closed 2012.04.11 18:33:54 LOG7[3684:3640]: Service [CT] finished (0 left)

3 2

Using Stunnel client but not Stunnel server with Apache mod_ssl
by Lilienberg, Daniel () 27 Apr '12

27 Apr '12

Hi, My supplier is using a somewhat strange setup looking like this: CLIENT: Stunnel running in client mode accepting incoming requests on port 8080. It will forward it to port to a server, port 443. SERVER: NOT running Stunnel at all, but running Apache with mod_ssl. It also acts as a proxy server, proxying all requests. Can this work, if so, how do I set it up ? [http://www.volvocars.net/support/IT/Services/IT_workplace/Email/outlook/sig…] Daniel Lilienberg Architect Connectivity Foundation Volvo Car Corporation Dept. 61630/PV2A Göteborg Sweden Telephone +46-31-3542317 dlilien2(a)volvocars.com<mailto:[email protected]> www.volvocars.com<http://www.volvocars.com/> Registered Office Göteborg, Sweden Registration No. 556074-3089

1 0

Windows 7 64-Bit
by Thomas Eifert 23 Apr '12

23 Apr '12

Has anyone attempted to install and run Stunnel on Windows 7 64-bit? If so, which version did you use, and were any issues experienced? Regards. Thomas -- Attention: This message and all attachments are private and may contain information that is confidential and privileged. If you received this message in error, please notify the sender by reply email and delete the message immediately.

1 0

Possible error in stunnel 4.20
by Andreea Ion 20 Apr '12

20 Apr '12

Hi, I am running stunnel 4.2 on windows and I get the following log. I don't know if it's ok, if the problem is at the stunnel lovel or at the application level. SSL state (connect): before/connect initialization 2012.04.20 11:46:09 LOG7[5684:4492]: SSL state (connect): SSLv3 write client hello A 2012.04.20 11:46:09 LOG7[5684:4492]: SSL state (connect): SSLv3 read server hello A 2012.04.20 11:46:09 LOG7[5684:4492]: SSL state (connect): SSLv3 read finished A 2012.04.20 11:46:09 LOG7[5684:4492]: SSL state (connect): SSLv3 write change cipher spec A 2012.04.20 11:46:09 LOG7[5684:4492]: SSL state (connect): SSLv3 write finished A 2012.04.20 11:46:09 LOG7[5684:4492]: SSL state (connect): SSLv3 flush data 2012.04.20 11:46:09 LOG7[5684:4492]: 2 items in the session cache 2012.04.20 11:46:09 LOG7[5684:4492]: 5 client connects (SSL_connect()) 2012.04.20 11:46:09 LOG7[5684:4492]: 5 client connects that finished 2012.04.20 11:46:09 LOG7[5684:4492]: 0 client renegotiations requested 2012.04.20 11:46:09 LOG7[5684:4492]: 0 server connects (SSL_accept()) 2012.04.20 11:46:09 LOG7[5684:4492]: 0 server connects that finished 2012.04.20 11:46:09 LOG7[5684:4492]: 0 server renegotiations requested 2012.04.20 11:46:09 LOG7[5684:4492]: 3 session cache hits 2012.04.20 11:46:09 LOG7[5684:4492]: 0 session cache misses 2012.04.20 11:46:09 LOG7[5684:4492]: 0 session cache timeouts 2012.04.20 11:46:09 LOG6[5684:4492]: SSL connected: previous session reused 2012.04.20 11:46:54 LOG3[5684:4492]: readsocket: Connection reset by peer (WSAECONNRESET) (10054) 2012.04.20 11:46:54 LOG5[5684:4492]: Connection reset: 154 bytes sent to SSL, 0 bytes sent to socket 2012.04.20 11:46:54 LOG7[5684:4492]: Session finished (0 left) The last 3 lines are those that interests me most. Is this ok ? Regards, Andreea

1 0

(no subject)
by Guylhem 18 Apr '12

18 Apr '12

Hello With verify=3 and the certs loaded in the conf file with CAfile=startssl-chain.pem cert=mycert.pem, I get : CERT: Certificate not found in local repository Using the latest stunnel recompiled on a debian squeeze, the best I can get is: error queue: 140B0009: error:140B0009:SSL routines:SSL_CTX_use_PrivateKey_file:PEM lib SSL_CTX_use_PrivateKey_file: 906D06C: error:0906D06C:PEM routines:PEM_read_bio:no start line However, if I put these very same pem files in a directory as a CApath option instead (c_rehash applied) everything works fine. But The pem files are identical ! I've read http://stunnel.mirt.net/pipermail/stunnel-users/2010-November/002854.html but it seems a bit different The startssl-chain.pem was created with: wget http://www.startssl.com/certs/ca.pem wget http://www.startssl.com/certs/startssl.ca.pem cat sub.class1.server.ca.pem ca.pem > startssl-chain.pem I guess that may be the cause of the problem? What should I do to pass these pem files as stunnel.conf options instead of using the CApath? Guylhem

1 0

(no subject)
by Marco Tulio Jimenez Abrego 18 Apr '12

18 Apr '12

Buenos días El mensaje de error es: Error resolving 'smtp.gmail.com': Neither nodename nor servname known (EAI_NONAME). Gracias por su atención. -- Saludos. Att. Marco T. Jiménez ================ Tel. 6619-6782

3 2

Stunnel compiled with openssl 1.0.1 local binaries are 0.9.8k
by Michael Curran 11 Apr '12

11 Apr '12

Are there any potential known issues with stunnel being compiled using openssl 1.0.1 build and leaving the local system binaries at 0.9.8k Do you know of any way to test this for any incompatibilities? This was not my design, Im just being asked to support it and Im looking to make sure this method is not going to cause anything unusual.

2 1

PPID of child process
by Philip Wong 11 Apr '12

11 Apr '12

Hi, I’m trying to setup stunnel listening to multiple ports. The PPID of processes created are always root. Can we change that to the right PPID? Here I can see all the processes by killing 10764 and I expect this is the PPID. But all the children PPID are still 1; UID PID PPID C STIME TTY TIME CMD philwong 10759 1 0 16:27 pts/78 00:00:00 stunnel self.conf philwong 10760 1 0 16:27 pts/78 00:00:00 stunnel self.conf philwong 10761 1 0 16:27 pts/78 00:00:00 stunnel self.conf philwong 10762 1 0 16:27 pts/78 00:00:00 stunnel self.conf philwong 10763 1 0 16:27 pts/78 00:00:00 stunnel self.conf philwong 10764 1 0 16:27 ? 00:00:00 stunnel self.conf Regards, Philip

3 6

the connection had to be retried using SSL 3.0. This typically means that the server is using very old software and may have other security issues :(
by Thomas Manson 10 Apr '12

10 Apr '12

Hi, while I'm trying to get stunnel working for more than a few hours, I've also notice this warning in google chrome : the connection had to be retried using SSL 3.0. This typically means that > the server is using very old software and may have other security issues. [image: Inline image 1] gmail for example has AES_128_CBC for crypting, can we get that without much effort? What should be set to get rid of this warning ? I thought SSL v3 was the best (quickly pick acrross several example on the net) what is the best setting for this ? Thanks for your help, Thomas. My config : debug = 7 output = /var/log/stunnel4/extranet.service.com_stunnel.log setuid = stunnel4 setgid = stunnel4 pid = /var/run/stunnel4/extranet.service.com.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [extranet.service.com] key = /etc/stunnel/sites/extranet.service.com/extranet.service.com.key cert = /etc/stunnel/sites/extranet.service.com/extranet.service.com.crt accept = 8.90.17.4:443 connect = 127.0.0.1:82 sslVersion = SSLv3 TIMEOUTclose = 0

3 4

[Stunnel Guru needed] stunnel running, but no longer serve connection after a while ("Dispatching signals from the signal pipe" in logs ==> all stops)
by Thomas Manson 09 Apr '12

09 Apr '12

Hi All, I'm really struggling to make stunnel working for more than a few hours. (and the client is yelling hard...) (I solved some other issue : logging per website and making more than one stunnel works) To put it in a nutshell : - stunnel is running and working correctly (I can reach the website in https correctly) - after some hours I get the following situation : - stunnel is still running on linux - trying to connect to a website result in the connection taking very long time and then fails : "*The connection to * extranet.serviceplus-hse.com <http://extranet.website.com>* was interrupted. Error 101 (net::ERR_CONNECTION_RESET): The connection was reset.*" (Chrome) Same symptoms on IE9, Firefox & Lynx (on the server that runs stunnel) (see logs below) - The following logs are the last one seen in the log file : - 2012.04.03 23:33:28 LOG5[24792:140152610346752]: Service extranet.serviceplus-hse.com connected remote server from 127.0.0.1:36256 - 2012.04.03 23:33:28 LOG7[24792:140152610346752]: Remote FD=1 initialized - 2012.04.03 23:33:28 LOG7[24792:140152610346752]: Option TCP_NODELAY set on remote socket - 2012.04.03 23:33:41 LOG7[24792:140152610346752]: Socket closed on read - 2012.04.03 23:33:41 LOG7[24792:140152610346752]: Sending SSL write shutdown - 2012.04.03 23:33:41 LOG7[24792:140152610346752]: SSL alert (write): warning: close notify - 2012.04.03 23:33:41 LOG6[24792:140152610346752]: SSL_shutdown successfully sent close_notify - 2012.04.03 23:33:41 LOG3[24792:140152610346752]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing - 2012.04.03 23:33:41 LOG5[24792:140152610346752]: Connection closed: 186584 bytes sent to SSL, 3275 bytes sent to socket - 2012.04.03 23:33:41 LOG7[24792:140152610346752]: Service extranet.serviceplus-hse.com finished (0 left) - 2012.04.04 06:25:04 LOG7[24792:140152610629408]: *Dispatching signals from the signal pipe * stopping the firewall & fail2ban do not change anything. (the last line is logged by this function : *static void signal_pipe_empty(void) ) * the base stunnel.log has the same ending : - 2012.04.03 21:10:42 LOG7[24778:139641780209408]: Service https-123monsite.com permitted by libwrap from 212.162.10.34:3244 - 2012.04.03 21:10:42 LOG5[24778:139641780209408]: Service https-123monsite.com accepted connection from 212.162.10.34:3244 - 2012.04.03 21:10:42 LOG7[24778:139641780209408]: SSL state (accept): before/accept initialization - 2012.04.03 21:10:42 LOG3[24778:139641780209408]: SSL_accept: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number - 2012.04.03 21:10:42 LOG5[24778:139641780209408]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket - 2012.04.03 21:10:42 LOG7[24778:139641780209408]: Service https-123monsite.com finished (0 left) - 2012.04.04 06:25:04 LOG7[24778:139641780213536]: Dispatching signals from the signal pipe - and at the same time (2012.04.04 06:25:04) all logs file stops : - root@ns0:/var/log/stunnel4# ll - total 128 - drwxr-xr-x 2 stunnel4 stunnel4 4096 2012-04-04 12:10 . - drwxr-xr-x 14 root root 4096 2012-04-04 06:25 .. - -rw-r----- 1 stunnel4 stunnel4 98084 2012-04-04 *06:25*extranet.serviceplus-hse.com_stunnel.log - -rw-r----- 1 stunnel4 stunnel4 4491 2012-04-04 06:25 mansonthomas.com_stunnel.log - -rw-r----- 1 stunnel4 stunnel4 0 2012-04-04 06:25 stunnel.log - -rw-r----- 1 stunnel4 stunnel4 11058 2012-04-04 06:25 stunnel.log.1 - I've seen some message about the same behavior but after an upgrade on freebsd and didn't find any solution... - Restarting stunnel restore the service immediately. below some information about my configuration... ask for more if needed. Thanks for any helps, Regards, Thomas. Distribution & Pachage info (x64 system) ###################################################################### root@ns0:/var/log/stunnel4# cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10" root@ns0:/var/log/stunnel4# aptitude show stunnel4 Package: stunnel4 New: yes State: installed Automatically installed: no Version: 3:*4.35-2build1* ###################################################################### lynx try : ###################################################################### root@ns0:/var/log/stunnel4# lynx https://extranet.serviceplus-hse.com Looking up extranet.serviceplus-hse.com Making HTTPS connection to extranet.serviceplus-hse.com Retrying connection without TLS. Looking up extranet.serviceplus-hse.com Making HTTPS connection to extranet.serviceplus-hse.com Alert!: Unable to make secure connection to remote host. lynx: Can't access startfile https://extranet.serviceplus-hse.com/ ###################################################################### ps -edf : ###################################################################### 1 24773 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 PWD=/ 1 24774 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 PWD=/ 1 24775 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 PWD=/ 1 24776 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 PWD=/ 1 24777 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 PWD=/ 1 24778 24778 24778 ? -1 Ss 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 PWD=/ 1 24787 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.serviceplus-hse.com.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 P 1 24788 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.serviceplus-hse.com.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 P 1 24789 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.serviceplus-hse.com.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 P 1 24790 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.serviceplus-hse.com.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 P 1 24791 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.serviceplus-hse.com.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 P 1 24792 24792 24792 ? -1 Ss 109 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.serviceplus-hse.com.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 P 1 24801 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/mansonthomas.com.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 PWD=/ 1 24802 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/mansonthomas.com.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 PWD=/ 1 24803 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/mansonthomas.com.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 PWD=/ 1 24804 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/mansonthomas.com.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 PWD=/ 1 24805 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/mansonthomas.com.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 PWD=/ 1 24806 24806 24806 ? -1 Ss 109 0:00 /usr/bin/stunnel4 /etc/stunnel/mansonthomas.com.conf TERM=screen-bce PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=en_US.UTF-8 PWD=/ ###################################################################### /etc/stunnel/base.conf ###################################################################### debug = 7 sslVersion = SSLv3 cert=/etc/stunnel/sites/123monsite.com/123monsite.com.crt key=/etc/stunnel/sites/123monsite.com/123monsite.com.key ; security enhancements for UNIX systems ; for chroot a copy of some devices and files is needed within the jail ;chroot = /var/lib/stunnel4/ setuid = stunnel4 setgid = stunnel4 ; PID is created inside the chroot jail pid = /var/run/stunnel4/stunnel4.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 output = /var/log/stunnel4/stunnel.log [https-123monsite.com] accept=88.190.17.222:443 connect=127.0.0.1:82 ###################################################################### /etc/stunnel/extranet.serviceplus-hse.com.conf ###################################################################### debug = 7 output = /var/log/stunnel4/extranet.serviceplus-hse.com_stunnel.log setuid = stunnel4 setgid = stunnel4 pid = /var/run/stunnel4/extranet.serviceplus-hse.com.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [extranet.serviceplus-hse.com] key = /etc/stunnel/sites/ extranet.serviceplus-hse.com/extranet.serviceplus-hse.com.key cert = /etc/stunnel/sites/ extranet.serviceplus-hse.com/extranet.serviceplus-hse.com.crt accept = 88.190.217.54:443 connect = 127.0.0.1:82 sslVersion = SSLv3 TIMEOUTclose = 0 ###################################################################### Last logs : /var/log/stunnel4/extranet.serviceplus-hse.com_stunnel.log ###################################################################### 2012.04.03 23:02:47 LOG6[24792:140152610346752]: SSL accepted: previous session reused 2012.04.03 23:02:47 LOG7[24792:140152610346752]: remote socket: FD=1 allocated (non-blocking mode) 2012.04.03 23:02:47 LOG6[24792:140152610346752]: connect_blocking: connecting 127.0.0.1:82 2012.04.03 23:02:47 LOG7[24792:140152610346752]: connect_blocking: s_poll_wait 127.0.0.1:82: waiting 10 seconds 2012.04.03 23:02:47 LOG5[24792:140152610346752]: connect_blocking: connected 127.0.0.1:82 2012.04.03 23:02:47 LOG5[24792:140152610346752]: Service extranet.serviceplus-hse.com connected remote server from 127.0.0.1:60624 2012.04.03 23:02:47 LOG7[24792:140152610346752]: Remote FD=1 initialized 2012.04.03 23:02:47 LOG7[24792:140152610346752]: Option TCP_NODELAY set on remote socket 2012.04.03 23:02:58 LOG7[24792:140152610346752]: Socket closed on read 2012.04.03 23:02:58 LOG7[24792:140152610346752]: Sending SSL write shutdown 2012.04.03 23:02:58 LOG7[24792:140152610346752]: SSL alert (write): warning: close notify 2012.04.03 23:02:58 LOG6[24792:140152610346752]: SSL_shutdown successfully sent close_notify 2012.04.03 23:02:58 LOG3[24792:140152610346752]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2012.04.03 23:02:58 LOG5[24792:140152610346752]: Connection closed: 167313 bytes sent to SSL, 1871 bytes sent to socket 2012.04.03 23:02:58 LOG7[24792:140152610346752]: Service extranet.serviceplus-hse.com finished (0 left) 2012.04.03 23:33:20 LOG7[24792:140152610629408]: local socket: FD=0 allocated (non-blocking mode) 2012.04.03 23:33:20 LOG7[24792:140152610629408]: Service extranet.serviceplus-hse.com accepted FD=0 from 82.224.128.241:52114 2012.04.03 23:33:20 LOG7[24792:140152610346752]: Service extranet.serviceplus-hse.com started 2012.04.03 23:33:20 LOG7[24792:140152610346752]: Option TCP_NODELAY set on local socket 2012.04.03 23:33:20 LOG7[24792:140152610346752]: Waiting for a libwrap process 2012.04.03 23:33:20 LOG7[24792:140152610346752]: Acquired libwrap process #0 2012.04.03 23:33:20 LOG7[24792:140152610346752]: Releasing libwrap process #0 2012.04.03 23:33:20 LOG7[24792:140152610346752]: Released libwrap process #0 2012.04.03 23:33:20 LOG7[24792:140152610346752]: Service extranet.serviceplus-hse.com permitted by libwrap from 82.224.128.241:52114 2012.04.03 23:33:20 LOG5[24792:140152610346752]: Service extranet.serviceplus-hse.com accepted connection from 82.224.128.241:52114 2012.04.03 23:33:20 LOG7[24792:140152610346752]: SSL state (accept): before/accept initialization 2012.04.03 23:33:20 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 read client hello B 2012.04.03 23:33:20 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 write server hello A 2012.04.03 23:33:20 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 write certificate A 2012.04.03 23:33:20 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 write key exchange A 2012.04.03 23:33:20 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 write server done A 2012.04.03 23:33:20 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 flush data 2012.04.03 23:33:20 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 read client key exchange A 2012.04.03 23:33:20 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 read finished A 2012.04.03 23:33:20 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 write change cipher spec A 2012.04.03 23:33:20 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 write finished A 2012.04.03 23:33:20 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 flush data 2012.04.03 23:33:20 LOG7[24792:140152610346752]: 7 items in the session cache 2012.04.03 23:33:20 LOG7[24792:140152610346752]: 0 client connects (SSL_connect()) 2012.04.03 23:33:20 LOG7[24792:140152610346752]: 0 client connects that finished 2012.04.03 23:33:20 LOG7[24792:140152610346752]: 0 client renegotiations requested 2012.04.03 23:33:20 LOG7[24792:140152610346752]: 21 server connects (SSL_accept()) 2012.04.03 23:33:20 LOG7[24792:140152610346752]: 20 server connects that finished 2012.04.03 23:33:20 LOG7[24792:140152610346752]: 0 server renegotiations requested 2012.04.03 23:33:20 LOG7[24792:140152610346752]: 9 session cache hits 2012.04.03 23:33:20 LOG7[24792:140152610346752]: 0 external session cache hits 2012.04.03 23:33:20 LOG7[24792:140152610346752]: 7 session cache misses 2012.04.03 23:33:20 LOG7[24792:140152610346752]: 4 session cache timeouts 2012.04.03 23:33:20 LOG6[24792:140152610346752]: SSL accepted: new session negotiated 2012.04.03 23:33:20 LOG6[24792:140152610346752]: Negotiated ciphers: DHE-RSA-CAMELLIA256-SHA SSLv3 Kx=DH Au=RSA Enc=Camellia(256) Mac=SHA1 2012.04.03 23:33:20 LOG7[24792:140152610346752]: remote socket: FD=1 allocated (non-blocking mode) 2012.04.03 23:33:20 LOG6[24792:140152610346752]: connect_blocking: connecting 127.0.0.1:82 2012.04.03 23:33:20 LOG7[24792:140152610346752]: connect_blocking: s_poll_wait 127.0.0.1:82: waiting 10 seconds 2012.04.03 23:33:20 LOG5[24792:140152610346752]: connect_blocking: connected 127.0.0.1:82 2012.04.03 23:33:20 LOG5[24792:140152610346752]: Service extranet.serviceplus-hse.com connected remote server from 127.0.0.1:36240 2012.04.03 23:33:20 LOG7[24792:140152610346752]: Remote FD=1 initialized 2012.04.03 23:33:20 LOG7[24792:140152610346752]: Option TCP_NODELAY set on remote socket 2012.04.03 23:33:27 LOG7[24792:140152610346752]: Socket closed on read 2012.04.03 23:33:27 LOG7[24792:140152610346752]: Sending SSL write shutdown 2012.04.03 23:33:27 LOG7[24792:140152610346752]: SSL alert (write): warning: close notify 2012.04.03 23:33:27 LOG6[24792:140152610346752]: SSL_shutdown successfully sent close_notify 2012.04.03 23:33:27 LOG3[24792:140152610346752]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2012.04.03 23:33:27 LOG5[24792:140152610346752]: Connection closed: 537 bytes sent to SSL, 620 bytes sent to socket 2012.04.03 23:33:27 LOG7[24792:140152610346752]: Service extranet.serviceplus-hse.com finished (0 left) 2012.04.03 23:33:27 LOG7[24792:140152610629408]: local socket: FD=0 allocated (non-blocking mode) 2012.04.03 23:33:27 LOG7[24792:140152610629408]: Service extranet.serviceplus-hse.com accepted FD=0 from 82.224.128.241:52123 2012.04.03 23:33:27 LOG7[24792:140152610346752]: Service extranet.serviceplus-hse.com started 2012.04.03 23:33:27 LOG7[24792:140152610346752]: Option TCP_NODELAY set on local socket 2012.04.03 23:33:27 LOG7[24792:140152610346752]: Waiting for a libwrap process 2012.04.03 23:33:27 LOG7[24792:140152610346752]: Acquired libwrap process #0 2012.04.03 23:33:27 LOG7[24792:140152610346752]: Releasing libwrap process #0 2012.04.03 23:33:27 LOG7[24792:140152610346752]: Released libwrap process #0 2012.04.03 23:33:27 LOG7[24792:140152610346752]: Service extranet.serviceplus-hse.com permitted by libwrap from 82.224.128.241:52123 2012.04.03 23:33:27 LOG5[24792:140152610346752]: Service extranet.serviceplus-hse.com accepted connection from 82.224.128.241:52123 2012.04.03 23:33:27 LOG7[24792:140152610346752]: SSL state (accept): before/accept initialization 2012.04.03 23:33:27 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 read client hello B 2012.04.03 23:33:27 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 write server hello A 2012.04.03 23:33:27 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 write change cipher spec A 2012.04.03 23:33:27 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 write finished A 2012.04.03 23:33:27 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 flush data 2012.04.03 23:33:28 LOG7[24792:140152610346752]: SSL state (accept): SSLv3 read finished A 2012.04.03 23:33:28 LOG7[24792:140152610346752]: 7 items in the session cache 2012.04.03 23:33:28 LOG7[24792:140152610346752]: 0 client connects (SSL_connect()) 2012.04.03 23:33:28 LOG7[24792:140152610346752]: 0 client connects that finished 2012.04.03 23:33:28 LOG7[24792:140152610346752]: 0 client renegotiations requested 2012.04.03 23:33:28 LOG7[24792:140152610346752]: 22 server connects (SSL_accept()) 2012.04.03 23:33:28 LOG7[24792:140152610346752]: 21 server connects that finished 2012.04.03 23:33:28 LOG7[24792:140152610346752]: 0 server renegotiations requested 2012.04.03 23:33:28 LOG7[24792:140152610346752]: 10 session cache hits 2012.04.03 23:33:28 LOG7[24792:140152610346752]: 0 external session cache hits 2012.04.03 23:33:28 LOG7[24792:140152610346752]: 7 session cache misses 2012.04.03 23:33:28 LOG7[24792:140152610346752]: 4 session cache timeouts 2012.04.03 23:33:28 LOG6[24792:140152610346752]: SSL accepted: previous session reused 2012.04.03 23:33:28 LOG7[24792:140152610346752]: remote socket: FD=1 allocated (non-blocking mode) 2012.04.03 23:33:28 LOG6[24792:140152610346752]: connect_blocking: connecting 127.0.0.1:82 2012.04.03 23:33:28 LOG7[24792:140152610346752]: connect_blocking: s_poll_wait 127.0.0.1:82: waiting 10 seconds 2012.04.03 23:33:28 LOG5[24792:140152610346752]: connect_blocking: connected 127.0.0.1:82 2012.04.03 23:33:28 LOG5[24792:140152610346752]: Service extranet.serviceplus-hse.com connected remote server from 127.0.0.1:36256 2012.04.03 23:33:28 LOG7[24792:140152610346752]: Remote FD=1 initialized 2012.04.03 23:33:28 LOG7[24792:140152610346752]: Option TCP_NODELAY set on remote socket 2012.04.03 23:33:41 LOG7[24792:140152610346752]: Socket closed on read 2012.04.03 23:33:41 LOG7[24792:140152610346752]: Sending SSL write shutdown 2012.04.03 23:33:41 LOG7[24792:140152610346752]: SSL alert (write): warning: close notify 2012.04.03 23:33:41 LOG6[24792:140152610346752]: SSL_shutdown successfully sent close_notify 2012.04.03 23:33:41 LOG3[24792:140152610346752]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2012.04.03 23:33:41 LOG5[24792:140152610346752]: Connection closed: 186584 bytes sent to SSL, 3275 bytes sent to socket 2012.04.03 23:33:41 LOG7[24792:140152610346752]: Service extranet.serviceplus-hse.com finished (0 left) 2012.04.04 06:25:04 LOG7[24792:140152610629408]: Dispatching signals from the signal pipe ######################################################################

2 6

Ubuntu version of stunnel : multiple process shown by a ps -edf, compiled from sources : one process
by Thomas Manson 08 Apr '12

08 Apr '12

Hi, To get around a bug of stunnel present in the package of Ubuntu 11.10 (that has been corrected in v4.38), I've compiled from sources (v4.53). It went well, but I did notice a change in the processes : from compiled sources, I can see only on process per conf file ###################################################################### 1 21402 21402 21402 ? -1 Ss 109 0:00 /usr/local/bin/stunnel4 /etc/stunnel/base.conf 1 21411 21411 21411 ? -1 Ss 109 0:00 /usr/local/bin/stunnel4 /etc/stunnel/extranet.serviceplus-hse.com.conf 1 21420 21420 21420 ? -1 Ss 109 0:00 /usr/local/bin/stunnel4 /etc/stunnel/mansonthomas.com.conf ###################################################################### while on the ubuntu version, I've multiple process per conf file. ps -edf from ubuntu distrib ###################################################################### 1 24773 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 24774 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 24775 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 24776 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 24777 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 24778 24778 24778 ? -1 Ss 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 24787 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.serviceplus-hse.com.conf 1 24788 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.serviceplus-hse.com.conf 1 24789 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.serviceplus-hse.com.conf 1 24790 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.serviceplus-hse.com.conf 1 24791 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.serviceplus-hse.com.conf 1 24792 24792 24792 ? -1 Ss 109 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.serviceplus-hse.com.conf 1 24801 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/mansonthomas.com.conf 1 24802 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/mansonthomas.com.conf 1 24803 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/mansonthomas.com.conf 1 24804 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/mansonthomas.com.conf 1 24805 24762 18168 ? -1 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/mansonthomas.com.conf 1 24806 24806 24806 ? -1 Ss 109 0:00 /usr/bin/stunnel4 /etc/stunnel/mansonthomas.com.conf ###################################################################### I'm using the exact same version of conf file for both setup... any idea why this change ? is one better than another ? Regards, Thomas.

1 0

Transparent STunnel & HAProxy on Centos6.2
by Scott McKeown 07 Apr '12

07 Apr '12

Hi All, I've been playing with this for a little while now and before the all in front of me and my head meet I was wondering if someone else could shed some light on this for me please. First off let me give you a over view of the network setup: My Virtual Machine has two interfaces eth0 has two addresses 192.168.82.9/18and 192.168.82.10/18. 192.168.82.9 is going to be for the management of the server and 192.168.82.10 is what the website will respond too. eth1 has a network of its own 10.0.0.0/24 and I have two Debian Apache web servers that are connected to this network 10.0.0.10 and 10.0.0.20. If this was a real world setup I might have put the management address (192.168.82.9) on a different port but I didn't think of that at the time of setting this up but I may do that later. Second what have I done! Well this is a brand new install of Centos6.2 minimal fully patched and both HAProxy and STunnel downloaded and installed. I'm using the devel version of HAProxy but thats a different story and version 4.53 of STunnel. Now the problem. Both seem to work perfectly as-long as I don't want to know who is accessing my site which make it next to useless. However, I can get HAProxy to report the IP Address of the visitor as long as you visit the HTTP page on port 80 as per my configuration file. I can also get STunnel to work with HAProxy but as soon as I enable 'protocol = proxy' the HTTPS side breaks and all I get in my browser is '400 Bad Request Your browser sent an invalid request'. I've played with everything I can thing of and I still cant get a Transparent STunnel>HAProxy solution working correctly. Config Files: stunnel.conf ====================================== chroot = /usr/local/var/lib/stunnel/ #setuid = nobody setgid = nobody pid = /stunnel.pid cert = /usr/local/etc/stunnel/stunnel.pem key = /usr/local/etc/stunnel/stunnel.pem options = NO_SSLv2 debug = 7 #fips = no [https] accept = 192.168.82.10:443 connect = 192.168.82.10:80 protocol = proxy haproxy.cfg ====================================== global daemon log /dev/log local4 maxconn 40000 ulimit-n 81000 defaults log global mode http contimeout 4000 clitimeout 42000 srvtimeout 43000 listen http1 bind 192.168.82.10:80 mode http option http-server-close option forwardfor source 0.0.0.0 usesrc clientip balance roundrobin server http1_1 10.0.0.10:80 cookie http1_1 check inter 2000 rise 2 fall 3 server http1_1 10.0.0.20:80 cookie http1_1 check inter 2000 rise 2 fall 3 Log file ====================================== Apr 5 12:37:32 lbmaster haproxy[1351]: Proxy http1 started. Apr 5 12:37:33 lbmaster stunnel: LOG5[1353:140163149080512]: stunnel 4.53 on x86_64-unknown-linux-gnu platform Apr 5 12:37:33 lbmaster stunnel: LOG5[1353:140163149080512]: Compiled/running with OpenSSL 1.0.0-fips 29 Mar 2010 Apr 5 12:37:33 lbmaster stunnel: LOG5[1353:140163149080512]: Threading:PTHREAD SSL:+ENGINE+OCSP+FIPS Auth:none Sockets:POLL+IPv6 Apr 5 12:37:33 lbmaster stunnel: LOG5[1353:140163149080512]: Reading configuration from file /usr/local/etc/stunnel/stunnel.conf Apr 5 12:37:33 lbmaster stunnel: LOG5[1353:140163149080512]: FIPS mode is enabled Apr 5 12:37:33 lbmaster stunnel: LOG6[1353:140163149080512]: Initializing service section [https] Apr 5 12:37:33 lbmaster stunnel: LOG5[1353:140163149080512]: Configuration successful Apr 5 12:37:41 lbmaster stunnel: LOG5[1354:140163149076224]: Service [https] accepted connection from 192.168.64.10:53149 Apr 5 12:37:41 lbmaster stunnel: LOG6[1354:140163149076224]: connect_blocking: connecting 192.168.82.10:80 Apr 5 12:37:41 lbmaster haproxy[1352]: Connect from 192.168.82.10:47570 to 192.168.82.10:80 (http1/HTTP) Apr 5 12:37:41 lbmaster stunnel: LOG5[1354:140163149076224]: connect_blocking: connected 192.168.82.10:80 Apr 5 12:37:41 lbmaster stunnel: LOG5[1354:140163149076224]: Service [https] connected remote server from 192.168.82.10:47570 Apr 5 12:37:41 lbmaster stunnel: LOG6[1354:140163149076224]: Server-mode proxy protocol negotiations started Apr 5 12:37:41 lbmaster stunnel: LOG6[1354:140163149076224]: Server-mode proxy protocol negotiations succeeded Apr 5 12:37:41 lbmaster stunnel: LOG6[1354:140163149076224]: SSL accepted: new session negotiated Apr 5 12:37:41 lbmaster stunnel: LOG6[1354:140163149076224]: Negotiated TLSv1/SSLv3 ciphersuite: DHE-RSA-AES256-SHA (256-bit encryption) Apr 5 12:37:41 lbmaster stunnel: LOG6[1354:140163149076224]: Compression: null, expansion: null Apr 5 12:37:41 lbmaster stunnel: LOG6[1354:140163149076224]: SSL_shutdown successfully sent close_notify alert Apr 5 12:37:41 lbmaster stunnel: LOG5[1354:140163149076224]: Error detected on socket (read) file descriptor: Broken pipe (32) Apr 5 12:37:41 lbmaster stunnel: LOG5[1354:140163149076224]: Connection reset: 187 byte(s) sent to SSL, 1 byte(s) sent to socket Any help would be most gracefully received and welcome. ~Yours, Scott

2 1

help
by Bill Tindal 07 Apr '12

07 Apr '12

On Sat, Apr 7, 2012 at 8:00 PM, <stunnel-users-request(a)stunnel.org> wrote: > Send stunnel-users mailing list submissions to > stunnel-users(a)stunnel.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://stunnel.mirt.net/mailman/listinfo/stunnel-users > or, via email, send a message with subject or body 'help' to > stunnel-users-request(a)stunnel.org > > You can reach the person managing the list at > stunnel-users-owner(a)stunnel.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of stunnel-users digest..." > > > Today's Topics: > > 1. Re: [Stunnel Guru needed] stunnel running, but no longer > serve connection after a while ("Dispatching signals from the > signal pipe" in logs ==> all stops) (Thomas Manson) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 7 Apr 2012 08:24:46 +0200 > From: Thomas Manson <dev.mansonthomas(a)gmail.com> > To: Scott Gifford <sgifford(a)suspectclass.com> > Cc: stunnel-users(a)stunnel.org > Subject: Re: [stunnel-users] [Stunnel Guru needed] stunnel running, > but no longer serve connection after a while ("Dispatching signals > from the signal pipe" in logs ==> all stops) > Message-ID: > <CA+PenvGYr+tTiKsavOgyaLOtoRxUo0nfxuRVDEzdvGDrFpefLg(a)mail.gmail.com > > > Content-Type: text/plain; charset="utf-8" > > This bug has been corrected in > > Version 4.38, 2011.06.28, urgency: MEDIUM: > > - New features > - Server-side SNI implemented (RFC 3546 section 3.1) with a new > service-level option "nsi". > - "socket" option also accepts "yes" and "no" for flags. > - Nagle's algorithm is now disabled by default for improved > interactivity. > - Bugfixes > - A compilation fix was added for OpenSSL version < 1.0.0. > - Signal pipe set to non-blocking mode. This bug caused hangs of > stunnel features based on signals, e.g. local mode, FORK threading, or > configuration file reload on Unix. Win32 platform was not affected. > > > however it don't precise from which version it affects stunnel... so my try > with 11.04 is a bit risky, even if 4.29 is quite far from 4.38. > > Maybe upgrading to 12.04 could solve the issue, but I don't like to upgrade > right away (I had some bad surpise ;)) > > so compiling from source seems to be the safest option. > > Thomas. > > On Sat, Apr 7, 2012 at 07:58, Thomas Manson <dev.mansonthomas(a)gmail.com > >wrote: > > > i've just checked my setup right now and the funny thing is that I think > > it stopped working exactly at the same second of the same hour & minute > of > > the day : > > > > > > root@ns0:/var/log/stunnel4# ll > > total 940 > > drwxr-xr-x 2 stunnel4 stunnel4 4096 2012-04-07 06:25 . > > drwxr-xr-x 14 root root 4096 2012-04-07 06:25 .. > > -rw-r----- 1 stunnel4 stunnel4 0 2012-04-07 06:25 > > extranet.serviceplus-hse.com_stunnel.log > > -rw-r----- 1 stunnel4 stunnel4 926267 2012-04-07 06:25 > > extranet.serviceplus-hse.com_stunnel.log.1 > > -rw-r----- 1 stunnel4 stunnel4 0 2012-04-07 06:25 > > mansonthomas.com_stunnel.log > > -rw-r----- 1 stunnel4 stunnel4 5804 2012-04-07 06:25 > > mansonthomas.com_stunnel.log.1 > > -rw-r----- 1 stunnel4 stunnel4 0 2012-04-07 06:25 stunnel.log > > -rw-r----- 1 stunnel4 stunnel4 11710 2012-04-07 06:25 stunnel.log.1 > > root@ns0:/var/log/stunnel4# ll > > total 940 > > drwxr-xr-x 2 stunnel4 stunnel4 4096 2012-04-07 06:25 . > > drwxr-xr-x 14 root root 4096 2012-04-07 06:25 .. > > -rw-r----- 1 stunnel4 stunnel4 0 2012-04-07 06:25 > > extranet.serviceplus-hse.com_stunnel.log > > -rw-r----- 1 stunnel4 stunnel4 926267 2012-04-07 06:25 > > extranet.serviceplus-hse.com_stunnel.log.1 > > -rw-r----- 1 stunnel4 stunnel4 0 2012-04-07 06:25 > > mansonthomas.com_stunnel.log > > -rw-r----- 1 stunnel4 stunnel4 5804 2012-04-07 06:25 > > mansonthomas.com_stunnel.log.1 > > -rw-r----- 1 stunnel4 stunnel4 0 2012-04-07 06:25 stunnel.log > > -rw-r----- 1 stunnel4 stunnel4 11710 2012-04-07 06:25 stunnel.log.1 > > root@ns0:/var/log/stunnel4# tail stunnel.log.1 > > 2012.04.06 22:21:19 LOG7[4745:139677248579328]: Option TCP_NODELAY set > on > > remote socket > > 2012.04.06 22:21:19 LOG7[4745:139677248579328]: Socket closed on read > > 2012.04.06 22:21:19 LOG7[4745:139677248579328]: Sending SSL write > shutdown > > 2012.04.06 22:21:19 LOG7[4745:139677248579328]: SSL alert (write): > > warning: close notify > > 2012.04.06 22:21:19 LOG6[4745:139677248579328]: SSL_shutdown > successfully > > sent close_notify > > 2012.04.06 22:21:19 LOG7[4745:139677248579328]: SSL socket closed on > > SSL_read > > 2012.04.06 22:21:19 LOG7[4745:139677248579328]: Sending socket write > > shutdown > > 2012.04.06 22:21:19 LOG5[4745:139677248579328]: Connection closed: 206 > > bytes sent to SSL, 139 bytes sent to socket > > 2012.04.06 22:21:19 LOG7[4745:139677248579328]: Service > > https-123monsite.com finished (0 left) > > 2012.04.07 06:25:04 LOG7[4745:139677248583456]: Dispatching signals from > > the signal pipe > > root@ns0:/var/log/stunnel4# > > > > compared to my first post... : > > > > > > > > > > - 2012.04.04 06:25:04 LOG7[24778:139641780213536]: Dispatching > signals > > from the signal pipe > > - > > and at the same time (2012.04.04 06:25:04) all logs file stops : > > > > > > - root@ns0:/var/log/stunnel4# ll > > - total 128 > > - drwxr-xr-x 2 stunnel4 stunnel4 4096 2012-04-04 12:10 . > > - drwxr-xr-x 14 root root 4096 2012-04-04 06:25 .. > > - -rw-r----- 1 stunnel4 stunnel4 98084 2012-04-04 *06:25* > > extranet.serviceplus-hse.com_stunnel.log > > - -rw-r----- 1 stunnel4 stunnel4 4491 2012-04-04 06:25 > > mansonthomas.com_stunnel.log > > - -rw-r----- 1 stunnel4 stunnel4 0 2012-04-04 06:25 stunnel.log > > - -rw-r----- 1 stunnel4 stunnel4 11058 2012-04-04 06:25 stunnel.log.1 > > > > > > > > I could cron a restart at the appropriate time but I think I'll compile > > from sources. > > > > Regards, > > Thomas. > > > > On Sat, Apr 7, 2012 at 07:51, Thomas Manson <dev.mansonthomas(a)gmail.com > >wrote: > > > >> Yes, it helps a lot ! > >> > >> I've another server running a different version of Ubuntu (11.04 where > >> stunnel version is 4.29-1 instead of 11.10 and stunnel 4.35-2build1) > >> > >> Do you think it can work on older version ? > >> > >> I was thinking to try this because I've seen some message about the same > >> symptoms after upgrade so... > >> > >> but maybe the two version are too close and I will need to compile from > >> sources... > >> > >> what do you think about this? > >> > >> Regards, > >> Thomas. > >> > >> > >> On Sat, Apr 7, 2012 at 06:56, Scott Gifford <sgifford(a)suspectclass.com > >wrote: > >> > >>> On Wed, Apr 4, 2012 at 6:16 AM, Thomas Manson < > >>> dev.mansonthomas(a)gmail.com> wrote: > >>> > >>>> Hi All, > >>>> > >>>> I'm really struggling to make stunnel working for more than a few > >>>> hours. (and the client is yelling hard...) (I solved some other issue > : > >>>> logging per website and making more than one stunnel works) > >>>> > >>> > >>> Hi Thomas, > >>> > >>> I was just troubleshooting what looks like a very similar issue. I > >>> believe this is fixed in a later version of stunnel, which you can get > from > >>> stunnel.org and compile yourself from source. > >>> > >>> This is the ChangeLog entry that I think addresses your problem: > >>> > >>> - Signal pipe set to non-blocking mode. This bug caused hangs of > >>> stunnel > >>> features based on signals, e.g. local mode, FORK threading, or > >>> configuration file reload on Unix. Win32 platform was not > affected. > >>> > >>> > >>> I have just updated from the official Oneiric version to this one, so I > >>> don't yet know if it will fix the problem long-term, but I think my > odds > >>> are not too bad. > >>> > >>> Hope this helps, > >>> > >>> -----Scott. > >>> > >>> > >> > > >

1 0

Looking for help - Stunnel works with Gmail but not with my provider
by Scott McKeown 05 Apr '12

05 Apr '12

Hi Pieter, What does stunnel -version show under the 'ciphers' section? Also have you tried this with the 'options = NO_SSLv3' commented out? ~Scott

2 2

Config for https server
by Ali Kabiri 05 Apr '12

05 Apr '12

I asked before but nobody answer Please I read manual but it's not clear for may task I have IP & Port with user and pass from HttpS server I want connect to server an use for tunneling like proxy server Please help me How config and connect to server?

2 1

MySQL through stunnel - fails after many days
by Whit Blauvelt 04 Apr '12

04 Apr '12

Hi, I have a Nagios plugin using an stunnel connection to a MySQL server across the LAN for frequent queries, where each one opens a fresh connection. Checking ulimit on both ends shows "unlimited" (I've found old discussions about that being a possible factor). There's nothing I've found in the logs to show where it's going wrong. It's just that after days of running fine, suddenly the queries start failing to connect through. Restarting stunnel on both ends immediately resolves the problem. I suppose I can just restart stunnel on both ends once a day from cron and be okay. But I'd rather find a real fix, if anyone recognizes what this would be and can point me to one. Thanks, Whit

2 2

Configure Stunnel 4.53 to Run on a Windows 2000 Machine?
by Jeff Salisbury 03 Apr '12

03 Apr '12

Greetings, we recently updated Stunnel to version 4.53 and we've discovered that Stunnel no longer runs on our Windows 2000 workstation. Here is the message in the Stunnel log: No limit detected for the number of clients stunnel 4.53 on x86-pc-mingw32-gnu platform Compiled/running with OpenSSL 0.9.8s-fips 4 Jan 2012 Threading:WIN32 SSL:+ENGINE+OCSP+FIPS Auth:none Sockets:SELECT+IPv4 Reading configuration from file C:\bin\Stunnel\stunnel.conf FIPS_mode_set: 2D06C071: error:2D06C071:FIPS routines:FIPS_mode_set:unsupported platform Server is down Please help! Is there a configuration change or addition we can make in our Stunnel.conf file that will allow us to run v4.53 on our Windows 2000 machine? Regards, Jeff

2 1

set proxy for stunnel client
by Ebrahim Khalilzadeh 02 Apr '12

02 Apr '12

Dear Users, Hi In our network users connect to internet using http proxy. I have a configuration file like this: [proxy] accept:4444 connect:remote_ip:remote_port connecting to remote ip needs http proxy. I tested some configurations like this: [proxy] protocol = connect protocolHost = proxy_ip:proxy_port accept:4444 connect:remote_ip:remote_port or [proxy] protocol = proxy protocolHost = proxy_ip:proxy_port accept:4444 connect:remote_ip:remote_port But now no success!!! How can i set stunnel to use proxy? Regards, Ebrahim khalilzadeh --

1 0

Stunnel running for a few minutes and then stop and can't handle multiple domains
by Thomas Manson 01 Apr '12

01 Apr '12

Hi, I've setup a stunnel install to handle several website SSL part of the HTTP (then redirected to HAProxy LoadBalancer). I can successfully start one site, but if I add another website (so another stunnel conf file in /etc/stunnel) then the first is said to be already running while it's not and the second starts for real. thomas@ns0:/var/log/stunnel4$ sudo service stunnel4 start Starting SSL tunnels: [Started: /etc/stunnel/base.conf] [Started: /etc/stunnel/extranet.onesite.com.conf] *[Already running: /etc/stunnel/mansonthomas.com.conf] stunnel.* (mansonthomas.com was my first try before implementing a client website) Also, in /var/log/stunnel.log I've only the logs for base.conf, not for the two other one. What should I do to have the logs? I've tryed to add debug=7 at the beginning of the two conf file, but nothing. After some times, the extranet site https stops working... I was off in holidays for the last two weeks, so I didn't have the time to really dig into this... what would be the first steps to debug this issues ? Regards, Thomas. 2012.03.29 15:31:41 LOG5[8181:140471188047648]: Reading configuration from file /etc/stunnel/base.conf 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Snagged 64 random bytes from /dev/urandom 2012.03.29 15:31:41 LOG7[8181:140471188047648]: PRNG seeded successfully 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Using DH parameters from /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:31:41 LOG6[8181:140471188047648]: DH initialized with 2048 bit key 2012.03.29 15:31:41 LOG7[8181:140471188047648]: ECDH initialized 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Certificate: /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Certificate loaded 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Key file: /etc/stunnel/sites/mainsite.com/mainsite.com.key 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Private key loaded 2012.03.29 15:31:41 LOG7[8181:140471188047648]: SSL context initialized for service https-mainsite.com 2012.03.29 15:31:41 LOG5[8181:140471188047648]: Configuration successful 2012.03.29 15:31:41 LOG5[8181:140471188047648]: No limit detected for the number of clients 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=3 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=8 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: signal_pipe: FD=9 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: signal_pipe: FD=10 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: accept socket: FD=11 allocated (non-blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Option SO_REUSEADDR set on accept socket 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Service https-mainsite.combound to 8.19.1.2:443 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Service https-mainsite.comopened FD=11 2012.03.29 15:31:41 LOG7[8187:140471188047648]: Created pid file /var/run/stunnel4/stunnel4.pid 2012.03.29 15:31:41 LOG5[8187:140471188047648]: stunnel 4.35 on x86_64-pc-linux-gnu with OpenSSL 1.0.0e 6 Sep 2011 2012.03.29 15:31:41 LOG5[8187:140471188047648]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2012.03.29 15:31:49 LOG7[8187:140471188047648]: Dispatching signals from the signal pipe 2012.03.29 15:31:49 LOG5[8187:140471188047648]: Received signal 15; terminating 2012.03.29 15:31:49 LOG7[8187:140471188047648]: removing pid file /var/run/stunnel4/stunnel4.pid 2012.03.29 15:32:38 LOG5[8280:140481745549088]: Reading configuration from file /etc/stunnel/base.conf 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Snagged 64 random bytes from /dev/urandom 2012.03.29 15:32:38 LOG7[8280:140481745549088]: PRNG seeded successfully 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Using DH parameters from /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:32:38 LOG6[8280:140481745549088]: DH initialized with 2048 bit key 2012.03.29 15:32:38 LOG7[8280:140481745549088]: ECDH initialized 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Certificate: /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Certificate loaded 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Key file: /etc/stunnel/sites/mainsite.com/mainsite.com.key 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Private key loaded 2012.03.29 15:32:38 LOG7[8280:140481745549088]: SSL context initialized for service https-mainsite.com 2012.03.29 15:32:38 LOG5[8280:140481745549088]: Configuration successful 2012.03.29 15:32:38 LOG5[8280:140481745549088]: No limit detected for the number of clients 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=3 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=8 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: signal_pipe: FD=9 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: signal_pipe: FD=10 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: accept socket: FD=11 allocated (non-blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Option SO_REUSEADDR set on accept socket 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Service https-mainsite.combound to 8.19.1.2:443 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Service https-mainsite.comopened FD=11 2012.03.29 15:32:38 LOG7[8286:140481745549088]: Created pid file /var/run/stunnel4/stunnel4.pid 2012.03.29 15:32:38 LOG5[8286:140481745549088]: stunnel 4.35 on x86_64-pc-linux-gnu with OpenSSL 1.0.0e 6 Sep 2011 2012.03.29 15:32:38 LOG5[8286:140481745549088]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP

1 2

Looking for help - Stunnel works with Gmail but not with my provider
by Verberne, Pieter 31 Mar '12

31 Mar '12

Hello, I have successfully used stunnel with blat to send e-mails from my gmail accounts. Getting this to work with my new internet provider "Ziggo" in The Netherlands seems impossible, despite days spent on the internet searching for help and trying numerous configurations. Whatever I do, there is always this message: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number Any help would be highly appreciated. Pieter Verberne PC: i7 OS: Windows 7 - 64bits Stunnel version: 4.53 When sending an e-mail from my PC with Thunderbird 2.0 I can successfully use TLS but not SSL. My provider says about secure smtp connections on their website: Outgoing mail server smtp.ziggo.nl (port number 587) Use of SSL (Secure Socket Layer) / TLS yes For this server is verification required / identity check yes User name your e-mail address Password your e-mail password Stunnel.conf: # GLOBAL OPTIONS debug = 7 output = D:\Pieter\Temp\stunnel-log.txt fips = no cert = stunnel.pem # SERVICE-LEVEL OPTIONS [SMTP Ziggo] client = yes options = NO_SSLv2 options = NO_SSLv3 sslVersion = TLSv1 accept = 587 connect = smtp.ziggo.nl:587 stunnel-log.txt: 2012.03.31 12:04:33 LOG7[2460:2516]: No limit detected for the number of clients 2012.03.31 12:04:33 LOG5[2460:2516]: stunnel 4.53 on x86-pc-mingw32-gnu platform 2012.03.31 12:04:33 LOG5[2460:2516]: Compiled/running with OpenSSL 0.9.8s-fips 4 Jan 2012 2012.03.31 12:04:33 LOG5[2460:2516]: Threading:WIN32 SSL:+ENGINE+OCSP+FIPS Auth:none Sockets:SELECT+IPv6 2012.03.31 12:04:33 LOG5[2460:2516]: Reading configuration from file stunnel.conf 2012.03.31 12:04:33 LOG5[2460:2516]: FIPS mode is disabled 2012.03.31 12:04:33 LOG7[2460:2516]: Compression not enabled 2012.03.31 12:04:34 LOG7[2460:2516]: Snagged 64 random bytes from C:/.rnd 2012.03.31 12:04:34 LOG7[2460:2516]: Wrote 1024 new random bytes to C:/.rnd 2012.03.31 12:04:34 LOG7[2460:2516]: PRNG seeded successfully 2012.03.31 12:04:34 LOG6[2460:2516]: Initializing service section [SMTP Ziggo] 2012.03.31 12:04:34 LOG7[2460:2516]: Certificate: stunnel.pem 2012.03.31 12:04:34 LOG7[2460:2516]: Certificate loaded 2012.03.31 12:04:34 LOG7[2460:2516]: Key file: stunnel.pem 2012.03.31 12:04:34 LOG7[2460:2516]: Private key loaded 2012.03.31 12:04:34 LOG7[2460:2516]: SSL options set: 0x03000004 2012.03.31 12:04:34 LOG5[2460:2516]: Configuration successful 2012.03.31 12:04:34 LOG7[2460:2516]: Service [SMTP Ziggo] (FD=308) bound to 0.0.0.0:587 2012.03.31 12:06:01 LOG7[2460:2516]: Service [SMTP Ziggo] accepted (FD=436) from 192.168.3.11:49195 2012.03.31 12:06:01 LOG7[2460:2516]: Creating a new thread 2012.03.31 12:06:01 LOG7[2460:2516]: New thread created 2012.03.31 12:06:01 LOG7[2460:3652]: Service [SMTP Ziggo] started 2012.03.31 12:06:01 LOG5[2460:3652]: Service [SMTP Ziggo] accepted connection from 192.168.3.11:49195 2012.03.31 12:06:01 LOG6[2460:3652]: connect_blocking: connecting 212.xx.xx.x:587 2012.03.31 12:06:01 LOG7[2460:3652]: connect_blocking: s_poll_wait 212.xx.xx.x:587: waiting 10 seconds 2012.03.31 12:06:01 LOG5[2460:3652]: connect_blocking: connected 212.xx.xx.x:587 2012.03.31 12:06:01 LOG5[2460:3652]: Service [SMTP Ziggo] connected remote server from 192.168.3.11:49196 2012.03.31 12:06:01 LOG7[2460:3652]: Remote socket (FD=460) initialized 2012.03.31 12:06:01 LOG3[2460:3652]: *SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number* 2012.03.31 12:06:01 LOG5[2460:3652]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2012.03.31 12:06:01 LOG7[2460:3652]: Remote socket (FD=460) closed 2012.03.31 12:06:01 LOG7[2460:3652]: Local socket (FD=436) closed 2012.03.31 12:06:01 LOG7[2460:3652]: Service [SMTP Ziggo] finished (0 left) 2012.03.31 12:18:01 LOG7[2460:2516]: Dispatching signals from the signal pipe 2012.03.31 12:18:04 LOG7[2460:2516]: Processing SIGNAL_TERMINATE

1 0

Re: [stunnel-users] stunnel 4.53 make error
by Scott McKeown 30 Mar '12

30 Mar '12

Hi Jose, That did it, thanks. Stupid thing is I check that I had OpenSSL but not the devel package. Mark one up for my stupidity (again). ~Yours, Scott On 30 March 2012 16:11, <josealf(a)rocketmail.com> wrote: > Scott, > > Most likely you don't have openssl-devel package installed. > > Regards > Jose > > -----Original Message----- > From: Scott McKeown <scott(a)loadbalancer.org> > Sender: stunnel-users-bounces(a)stunnel.org > Date: Fri, 30 Mar 2012 16:00:45 > To: <stunnel-users(a)stunnel.org> > Subject: [stunnel-users] stunnel 4.53 make error > > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)stunnel.org > http://stunnel.mirt.net/mailman/listinfo/stunnel-users > > > >

1 0

stunnel 4.53 make error
by Scott McKeown 30 Mar '12

30 Mar '12

Hi Guys, Just tried to install stunnel-4.53 onto a virgin Cento6.2 x64 system with HAProxy (box is fully patched too), However, every time I runt the 'make' command I get the following output. I've had a bit of a hunt around but this is a little outside of both my comfort zone and my knowledge levels so any help would be great. [root@localhost ~]# cd /root/stunnel-4.53 [root@localhost stunnel-4.53]# make Making all in src make[1]: Entering directory `/root/stunnel-4.53/src' make all-am make[2]: Entering directory `/root/stunnel-4.53/src' gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include -I/usr//include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -pthread -fstack-protector -fPIE -g -O2 -Wall -Wextra -Wno-long-long -pedantic -MT stunnel-str.o -MD -MP -MF .deps/stunnel-str.Tpo -c -o stunnel-str.o `test -f 'str.c' || echo './'`str.c In file included from str.c:38: common.h:392:33: error: openssl/opensslconf.h: No such file or directory common.h:405:27: error: openssl/lhash.h: No such file or directory common.h:406:25: error: openssl/ssl.h: No such file or directory common.h:407:25: error: openssl/err.h: No such file or directory common.h:408:66: error: openssl/crypto.h: No such file or directory common.h:409:26: error: openssl/rand.h: No such file or directory common.h:411:25: error: openssl/md4.h: No such file or directory common.h:413:25: error: openssl/des.h: No such file or directory In file included from str.c:38: common.h:449: warning: return type defaults to ‘int’ common.h: In function ‘STACK_OF’: common.h:449: error: expected declaration specifiers before ‘*’ token In file included from str.c:39: prototypes.h:50: error: storage class specified for parameter ‘LOG_MODE’ prototypes.h:61: error: storage class specified for parameter ‘SOCKADDR_UNION’ prototypes.h:64: error: expected specifier-qualifier-list before ‘SOCKADDR_UNION’ prototypes.h:67: warning: struct has no members prototypes.h:67: error: storage class specified for parameter ‘SOCKADDR_LIST’ prototypes.h:72: error: storage class specified for parameter ‘COMP_TYPE’ prototypes.h:78: error: expected specifier-qualifier-list before ‘COMP_TYPE’ prototypes.h:114: warning: struct has no members prototypes.h:114: error: storage class specified for parameter ‘GLOBAL_OPTIONS’ prototypes.h:116: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘global_options’ prototypes.h:124: error: expected specifier-qualifier-list before ‘SSL_CTX’ prototypes.h:222: error: storage class specified for parameter ‘SERVICE_OPTIONS’ prototypes.h:224: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘service_options’ prototypes.h:236: error: storage class specified for parameter ‘VAL_TYPE’ prototypes.h:244: error: storage class specified for parameter ‘OPT_UNION’ prototypes.h:250: error: expected specifier-qualifier-list before ‘VAL_TYPE’ prototypes.h:252: error: storage class specified for parameter ‘SOCK_OPT’ prototypes.h:256: error: storage class specified for parameter ‘CONF_TYPE’ prototypes.h:269: error: storage class specified for parameter ‘s_poll_set’ prototypes.h:278: error: storage class specified for parameter ‘DISK_FILE’ prototypes.h:285: error: storage class specified for parameter ‘FD’ prototypes.h:290: error: storage class specified for parameter ‘max_clients’ prototypes.h:291: error: storage class specified for parameter ‘num_clients’ prototypes.h:327: warning: parameter names (without types) in function declaration prototypes.h:347: error: storage class specified for parameter ‘cli_index’ prototypes.h:347: error: storage class specified for parameter ‘opt_index’ prototypes.h:350: error: expected ‘)’ before ‘*’ token prototypes.h:355: error: expected declaration specifiers or ‘...’ before ‘CONF_TYPE’ prototypes.h:361: error: expected specifier-qualifier-list before ‘SERVICE_OPTIONS’ prototypes.h:363: warning: struct has no members prototypes.h:363: error: storage class specified for parameter ‘UI_DATA’ prototypes.h:365: error: expected ‘)’ before ‘*’ token prototypes.h:370: error: expected ‘)’ before ‘*’ token prototypes.h:374: error: expected declaration specifiers before ‘s_poll_set’ prototypes.h:375: error: expected ‘)’ before ‘*’ token prototypes.h:376: error: expected ‘)’ before ‘*’ token prototypes.h:377: error: expected ‘)’ before ‘*’ token prototypes.h:378: error: expected ‘)’ before ‘*’ token prototypes.h:379: error: expected ‘)’ before ‘*’ token prototypes.h:380: error: expected ‘)’ before ‘*’ token prototypes.h:381: error: expected ‘)’ before ‘*’ token prototypes.h:401: error: expected specifier-qualifier-list before ‘SSL’ prototypes.h:422: error: storage class specified for parameter ‘CLI’ prototypes.h:424: error: expected declaration specifiers before ‘CLI’ prototypes.h:426: error: expected ‘)’ before ‘*’ token prototypes.h:430: error: expected ‘)’ before ‘*’ token prototypes.h:431: error: expected ‘)’ before ‘*’ token prototypes.h:432: error: expected ‘)’ before ‘*’ token prototypes.h:433: error: expected ‘)’ before ‘*’ token prototypes.h:434: error: expected ‘)’ before ‘*’ token prototypes.h:436: error: expected ‘)’ before ‘*’ token prototypes.h:450: error: storage class specified for parameter ‘PROTOCOL_TYPE’ prototypes.h:453: error: expected ‘)’ before ‘*’ token prototypes.h:457: error: expected ‘)’ before ‘*’ token prototypes.h:458: error: expected ‘)’ before ‘*’ token prototypes.h:459: error: expected ‘)’ before ‘*’ token prototypes.h:460: error: expected ‘)’ before ‘*’ token prototypes.h:461: error: expected ‘)’ before ‘*’ token prototypes.h:462: warning: type defaults to ‘int’ in declaration of ‘SOCKADDR_UNION’ prototypes.h:462: error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token prototypes.h:493: error: storage class specified for parameter ‘SECTION_CODE’ prototypes.h:495: warning: parameter names (without types) in function declaration prototypes.h:496: warning: parameter names (without types) in function declaration prototypes.h:500: error: expected declaration specifiers or ‘...’ before ‘CLI’ prototypes.h:548: error: expected declaration specifiers before ‘DISK_FILE’ prototypes.h:550: error: expected declaration specifiers before ‘DISK_FILE’ prototypes.h:551: error: expected ‘)’ before ‘*’ token prototypes.h:552: error: expected ‘)’ before ‘*’ token prototypes.h:553: error: expected ‘)’ before ‘*’ token prototypes.h:563: error: expected ‘)’ before ‘*’ token str.c:49: error: storage class specified for parameter ‘canary’ str.c:50: error: storage class specified for parameter ‘canary_initialized’ str.c:50: error: parameter ‘canary_initialized’ is initialized str.c:52: error: storage class specified for parameter ‘ALLOC_LIST’ str.c:55: error: expected specifier-qualifier-list before ‘ALLOC_LIST’ str.c:57: warning: struct has no members str.c:57: error: storage class specified for parameter ‘ALLOC_TLS’ str.c:60: error: expected specifier-qualifier-list before ‘ALLOC_LIST’ str.c:67: warning: struct has no members str.c:59: warning: empty declaration str.c:73: error: expected ‘)’ before ‘*’ token str.c:74: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token str.c:75: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token str.c:77: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:85: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:95: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:157: error: storage class specified for parameter ‘pthread_key’ str.c:159: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:163: error: expected ‘)’ before ‘*’ token str.c:167: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token str.c:191: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:198: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:210: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:228: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:262: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:291: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:315: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:326: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token common.h:449: warning: type of ‘SSL_COMP’ defaults to ‘int’ str.c:157: error: declaration for parameter ‘pthread_key’ but no such parameter str.c:57: error: declaration for parameter ‘ALLOC_TLS’ but no such parameter str.c:52: error: declaration for parameter ‘ALLOC_LIST’ but no such parameter str.c:50: error: declaration for parameter ‘canary_initialized’ but no such parameter str.c:49: error: declaration for parameter ‘canary’ but no such parameter prototypes.h:581: error: declaration for parameter ‘str_printf’ but no such parameter prototypes.h:580: error: declaration for parameter ‘str_vprintf’ but no such parameter prototypes.h:579: error: declaration for parameter ‘str_dup’ but no such parameter prototypes.h:577: error: declaration for parameter ‘str_free_debug’ but no such parameter prototypes.h:575: error: declaration for parameter ‘str_detach_debug’ but no such parameter prototypes.h:573: error: declaration for parameter ‘str_realloc_debug’ but no such parameter prototypes.h:571: error: declaration for parameter ‘str_alloc_debug’ but no such parameter prototypes.h:570: error: declaration for parameter ‘str_stats’ but no such parameter prototypes.h:569: error: declaration for parameter ‘str_cleanup’ but no such parameter prototypes.h:568: error: declaration for parameter ‘str_canary_init’ but no such parameter prototypes.h:567: error: declaration for parameter ‘str_init’ but no such parameter prototypes.h:562: error: declaration for parameter ‘libwrap_init’ but no such parameter prototypes.h:500: error: declaration for parameter ‘create_client’ but no such parameter prototypes.h:499: error: declaration for parameter ‘stunnel_thread_id’ but no such parameter prototypes.h:498: error: declaration for parameter ‘stunnel_process_id’ but no such parameter prototypes.h:497: error: declaration for parameter ‘sthreads_init’ but no such parameter prototypes.h:496: error: declaration for parameter ‘leave_critical_section’ but no such parameter prototypes.h:495: error: declaration for parameter ‘enter_critical_section’ but no such parameter prototypes.h:493: error: declaration for parameter ‘SECTION_CODE’ but no such parameter prototypes.h:463: error: declaration for parameter ‘s_gai_strerror’ but no such parameter prototypes.h:452: error: declaration for parameter ‘find_protocol_id’ but no such parameter prototypes.h:450: error: declaration for parameter ‘PROTOCOL_TYPE’ but no such parameter prototypes.h:425: error: declaration for parameter ‘client_thread’ but no such parameter prototypes.h:422: error: declaration for parameter ‘CLI’ but no such parameter prototypes.h:395: error: declaration for parameter ‘make_sockets’ but no such parameter prototypes.h:394: error: declaration for parameter ‘get_socket_error’ but no such parameter prototypes.h:393: error: declaration for parameter ‘set_socket_options’ but no such parameter prototypes.h:366: error: declaration for parameter ‘sslerror’ but no such parameter prototypes.h:363: error: declaration for parameter ‘UI_DATA’ but no such parameter prototypes.h:356: error: declaration for parameter ‘apply_conf’ but no such parameter prototypes.h:355: error: declaration for parameter ‘parse_conf’ but no such parameter prototypes.h:354: error: declaration for parameter ‘parse_commandline’ but no such parameter prototypes.h:349: error: declaration for parameter ‘ssl_init’ but no such parameter prototypes.h:347: error: declaration for parameter ‘opt_index’ but no such parameter prototypes.h:347: error: declaration for parameter ‘cli_index’ but no such parameter prototypes.h:343: error: declaration for parameter ‘pty_allocate’ but no such parameter prototypes.h:339: error: declaration for parameter ‘s_strerror’ but no such parameter prototypes.h:338: error: declaration for parameter ‘log_error’ but no such parameter prototypes.h:337: error: declaration for parameter ‘sockerror’ but no such parameter prototypes.h:336: error: declaration for parameter ‘ioerror’ but no such parameter prototypes.h:334: error: declaration for parameter ‘fatal_debug’ but no such parameter prototypes.h:328: error: declaration for parameter ‘s_log’ but no such parameter prototypes.h:327: error: declaration for parameter ‘log_flush’ but no such parameter prototypes.h:326: error: declaration for parameter ‘log_close’ but no such parameter prototypes.h:325: error: declaration for parameter ‘log_open’ but no such parameter prototypes.h:323: error: declaration for parameter ‘syslog_close’ but no such parameter prototypes.h:322: error: declaration for parameter ‘syslog_open’ but no such parameter prototypes.h:317: error: declaration for parameter ‘set_nonblock’ but no such parameter prototypes.h:316: error: declaration for parameter ‘s_accept’ but no such parameter prototypes.h:315: error: declaration for parameter ‘s_socketpair’ but no such parameter prototypes.h:314: error: declaration for parameter ‘s_pipe’ but no such parameter prototypes.h:313: error: declaration for parameter ‘s_socket’ but no such parameter prototypes.h:311: error: declaration for parameter ‘get_limits’ but no such parameter prototypes.h:306: error: declaration for parameter ‘stunnel_info’ but no such parameter prototypes.h:304: error: declaration for parameter ‘child_status’ but no such parameter prototypes.h:302: error: declaration for parameter ‘signal_post’ but no such parameter prototypes.h:300: error: declaration for parameter ‘drop_privileges’ but no such parameter prototypes.h:298: error: declaration for parameter ‘bind_ports’ but no such parameter prototypes.h:297: error: declaration for parameter ‘unbind_ports’ but no such parameter prototypes.h:296: error: declaration for parameter ‘daemon_loop’ but no such parameter prototypes.h:295: error: declaration for parameter ‘main_configure’ but no such parameter prototypes.h:294: error: declaration for parameter ‘main_initialize’ but no such parameter prototypes.h:291: error: declaration for parameter ‘num_clients’ but no such parameter prototypes.h:290: error: declaration for parameter ‘max_clients’ but no such parameter prototypes.h:285: error: declaration for parameter ‘FD’ but no such parameter prototypes.h:278: error: declaration for parameter ‘DISK_FILE’ but no such parameter prototypes.h:269: error: declaration for parameter ‘s_poll_set’ but no such parameter prototypes.h:256: error: declaration for parameter ‘CONF_TYPE’ but no such parameter prototypes.h:252: error: declaration for parameter ‘SOCK_OPT’ but no such parameter prototypes.h:244: error: declaration for parameter ‘OPT_UNION’ but no such parameter prototypes.h:236: error: declaration for parameter ‘VAL_TYPE’ but no such parameter prototypes.h:222: error: declaration for parameter ‘SERVICE_OPTIONS’ but no such parameter prototypes.h:114: error: declaration for parameter ‘GLOBAL_OPTIONS’ but no such parameter prototypes.h:72: error: declaration for parameter ‘COMP_TYPE’ but no such parameter prototypes.h:67: error: declaration for parameter ‘SOCKADDR_LIST’ but no such parameter prototypes.h:61: error: declaration for parameter ‘SOCKADDR_UNION’ but no such parameter prototypes.h:50: error: declaration for parameter ‘LOG_MODE’ but no such parameter str.c:342: error: expected ‘{’ at end of input common.h:449: warning: unused parameter ‘SSL_COMP’ str.c:157: warning: unused parameter ‘pthread_key’ str.c:57: warning: unused parameter ‘ALLOC_TLS’ str.c:52: warning: unused parameter ‘ALLOC_LIST’ str.c:50: warning: unused parameter ‘canary_initialized’ str.c:49: warning: unused parameter ‘canary’ prototypes.h:581: warning: unused parameter ‘str_printf’ prototypes.h:580: warning: unused parameter ‘str_vprintf’ prototypes.h:579: warning: unused parameter ‘str_dup’ prototypes.h:577: warning: unused parameter ‘str_free_debug’ prototypes.h:575: warning: unused parameter ‘str_detach_debug’ prototypes.h:573: warning: unused parameter ‘str_realloc_debug’ prototypes.h:571: warning: unused parameter ‘str_alloc_debug’ prototypes.h:570: warning: unused parameter ‘str_stats’ prototypes.h:569: warning: unused parameter ‘str_cleanup’ prototypes.h:568: warning: unused parameter ‘str_canary_init’ prototypes.h:567: warning: unused parameter ‘str_init’ prototypes.h:562: warning: unused parameter ‘libwrap_init’ prototypes.h:500: warning: unused parameter ‘create_client’ prototypes.h:499: warning: unused parameter ‘stunnel_thread_id’ prototypes.h:498: warning: unused parameter ‘stunnel_process_id’ prototypes.h:497: warning: unused parameter ‘sthreads_init’ prototypes.h:496: warning: unused parameter ‘leave_critical_section’ prototypes.h:495: warning: unused parameter ‘enter_critical_section’ prototypes.h:493: warning: unused parameter ‘SECTION_CODE’ prototypes.h:463: warning: unused parameter ‘s_gai_strerror’ prototypes.h:452: warning: unused parameter ‘find_protocol_id’ prototypes.h:450: warning: unused parameter ‘PROTOCOL_TYPE’ prototypes.h:425: warning: unused parameter ‘client_thread’ prototypes.h:422: warning: unused parameter ‘CLI’ prototypes.h:395: warning: unused parameter ‘make_sockets’ prototypes.h:394: warning: unused parameter ‘get_socket_error’ prototypes.h:393: warning: unused parameter ‘set_socket_options’ prototypes.h:366: warning: unused parameter ‘sslerror’ prototypes.h:363: warning: unused parameter ‘UI_DATA’ prototypes.h:356: warning: unused parameter ‘apply_conf’ prototypes.h:355: warning: unused parameter ‘parse_conf’ prototypes.h:354: warning: unused parameter ‘parse_commandline’ prototypes.h:349: warning: unused parameter ‘ssl_init’ prototypes.h:347: warning: unused parameter ‘opt_index’ prototypes.h:347: warning: unused parameter ‘cli_index’ prototypes.h:343: warning: unused parameter ‘pty_allocate’ prototypes.h:339: warning: unused parameter ‘s_strerror’ prototypes.h:338: warning: unused parameter ‘log_error’ prototypes.h:337: warning: unused parameter ‘sockerror’ prototypes.h:336: warning: unused parameter ‘ioerror’ prototypes.h:334: warning: unused parameter ‘fatal_debug’ prototypes.h:328: warning: unused parameter ‘s_log’ prototypes.h:327: warning: unused parameter ‘log_flush’ prototypes.h:326: warning: unused parameter ‘log_close’ prototypes.h:325: warning: unused parameter ‘log_open’ prototypes.h:323: warning: unused parameter ‘syslog_close’ prototypes.h:322: warning: unused parameter ‘syslog_open’ prototypes.h:317: warning: unused parameter ‘set_nonblock’ prototypes.h:316: warning: unused parameter ‘s_accept’ prototypes.h:315: warning: unused parameter ‘s_socketpair’ prototypes.h:314: warning: unused parameter ‘s_pipe’ prototypes.h:313: warning: unused parameter ‘s_socket’ prototypes.h:311: warning: unused parameter ‘get_limits’ prototypes.h:306: warning: unused parameter ‘stunnel_info’ prototypes.h:304: warning: unused parameter ‘child_status’ prototypes.h:302: warning: unused parameter ‘signal_post’ prototypes.h:300: warning: unused parameter ‘drop_privileges’ prototypes.h:298: warning: unused parameter ‘bind_ports’ prototypes.h:297: warning: unused parameter ‘unbind_ports’ prototypes.h:296: warning: unused parameter ‘daemon_loop’ prototypes.h:295: warning: unused parameter ‘main_configure’ prototypes.h:294: warning: unused parameter ‘main_initialize’ prototypes.h:291: warning: unused parameter ‘num_clients’ prototypes.h:290: warning: unused parameter ‘max_clients’ prototypes.h:285: warning: unused parameter ‘FD’ prototypes.h:278: warning: unused parameter ‘DISK_FILE’ prototypes.h:269: warning: unused parameter ‘s_poll_set’ prototypes.h:256: warning: unused parameter ‘CONF_TYPE’ prototypes.h:252: warning: unused parameter ‘SOCK_OPT’ prototypes.h:244: warning: unused parameter ‘OPT_UNION’ prototypes.h:236: warning: unused parameter ‘VAL_TYPE’ prototypes.h:222: warning: unused parameter ‘SERVICE_OPTIONS’ prototypes.h:114: warning: unused parameter ‘GLOBAL_OPTIONS’ prototypes.h:72: warning: unused parameter ‘COMP_TYPE’ prototypes.h:67: warning: unused parameter ‘SOCKADDR_LIST’ prototypes.h:61: warning: unused parameter ‘SOCKADDR_UNION’ prototypes.h:50: warning: unused parameter ‘LOG_MODE’ make[2]: *** [stunnel-str.o] Error 1 make[2]: Leaving directory `/root/stunnel-4.53/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/root/stunnel-4.53/src' make: *** [all-recursive] Error 1 [root@localhost stunnel-4.53]# ~Yours, Scott

1 0

SNI with protocol=proxy ?
by Marek Majkowski 29 Mar '12

29 Mar '12

Hi, I'm having trouble using SNI with protocol=proxy. Stunnel seems to ignore protocol option defined in the 'children', for example now protocol will be ignored: [https_default] accept = 443 connect = 10443 cert = a.crt key = a.key [https_one] sni = https_default:one.org protocol = proxy connect = 10444 cert = one.crt key = one.key On the other hand when defined on the 'default' resource, the connect option seems to be ignored: [https_default] accept = 443 protocol = proxy connect = 10443 cert = a.crt key = a.key [https_one] sni = https_default:one.org connect = 10444 ;; nope! still 10443 cert = one.crt key = one.key Any suggestions? Cheers, Marek

3 6

RMI with SSL
by Anoop Joseph 29 Mar '12

29 Mar '12

Hi, We have an existing RMI server which is not SSL aware and is based on Java version 1.4.1. We want to use stunnel to make this existing RMI server SSL aware. Checking the official website of stunnel the support to following protocols were found cifs , connect, imap, nntp, pgsql, pop3, proxy and smtp. As no reference to JRMP was available, wondering if stunnel can be used to make the existing non SSL RMI server SSL aware. If this is possible then we belive that it would be achived by providing the mapping between the port configured with stunel and the existing port used by RMI. Also the eixsitng RMI server would have to undergo minial change using this approach. Your help is highly appreciated. Thanks in advance. Best Regards, Anoop

1 0