- stunnel-users - stunnel.org

HTTPS proxy tunnel. ssl handshake failure
by Kirill Franko 22 Jul '16

22 Jul '16

1 1

AiX 7.1 TL3 SP6 - Stunnel Memory Usages grows after 24 hours
by Benjamin, Earl 19 Jul '16

19 Jul '16

Hello Everyone, I am running Stunnel-5.29 in AiX 7.1 TL3 SP6. I have added the DH param to the bottom of my CERT file. After approximately 24 hours or so the Stunnel CPU usage jumps to about 50% and after a few days to about 90%. Is there a configuration setting I've missed or compile option I need to consider? Thanks for your assistance in advance. Below is a cleaned up version of my config file. -Earl ------------------------------------------------- ; Verify peer certificate verify = 2 ; Certificate/key is needed in server mode and in client mode cert = /Server-certificate-all.pem key = /Server-certificate-all.pem CAfile = /all_root_ca.pem ; Protocol version (all, SSLv2, SSLv3, TLSv1) sslVersion = TLSv1 ; PID path pid = /etc/oraserver_stunnel.pid ; Turn off Nagle algorithm socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Debug level debug = 2 ; Use it for client mode client = no ; Ciphers ciphers = DHE-RSA-AES256-SHA ; Service-level configuration [ oraserver_DB ] accept = 15210 connect = server:1622 [ oraserver_ASM ] accept = 15211 connect = server:1621 This message and any attachments are solely for the use of intended recipients. The information contained herein may include trade secrets, protected health or personal information, privileged or otherwise confidential information. Unauthorized review, forwarding, printing, copying, distributing, or using such information is strictly prohibited and may be unlawful. If you are not an intended recipient, you are hereby notified that you received this email in error, and that any review, dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please contact the sender and delete the message and any attachment from your system. Thank you for your cooperation

1 0

Man in the middle attack possibility
by Abhinav Srivastava 19 Jul '16

19 Jul '16

Hi, I'm trying to use stunnel to provide encryption for my application to server communication. Server is already ssl aware. I configured my app to talk to localhost:xyz, and configured stunnel in client mode to relay traffic from localhost:<xyz> to actual service. The stunnel to service ssl protocol would use the server certificate, as server is already ssl aware. For any reason if stunnel is not running it would become possible for a non-elevated attacker/malware to spin up a tcp server listening to xyz, essentially taking advantage of my re-configuration of app to talk to localhost:xyz, and spoof the actual server. Even if my app to server protocol had some anti-spoofing mechanism say e.g., reverse CHAP, the malware can easily relay the challenge and response by using the actual service. In my case the actual app is iscsi initiator software that is not in my control and cant be modified, while the server is an iscsi tcp server which I am free to modify. Are there any guidance/best practices around preventing this attack with stunnel? Thanks Abhinav

1 0

Client certificates now required by default?
by Wiest, Damian 07 Jul '16

07 Jul '16

After building stunnel 5.34 from source I noticed that my old config (5.22) was not working. [dwiest@716161-compute2 ~]$ sudo ./stunnel /etc/stunnel/stunnel.conf 2016.07.07 14:07:41 LOG5[ui]: stunnel 5.34 on x86_64-unknown-linux-gnu platform 2016.07.07 14:07:41 LOG5[ui]: Compiled/running with OpenSSL 1.0.1e-fips 11 Feb 2013 2016.07.07 14:07:41 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI Auth:LIBWRAP 2016.07.07 14:07:41 LOG5[ui]: Reading configuration from file /etc/stunnel/stunnel.conf 2016.07.07 14:07:41 LOG5[ui]: UTF-8 byte order mark not detected 2016.07.07 14:07:41 LOG5[ui]: FIPS mode disabled 2016.07.07 14:07:41 LOG5[ui]: Configuration successful 2016.07.07 14:07:41 LOG5[cron]: Updating DH parameters 2016.07.07 14:07:42 LOG5[0]: Service [rabbitmq] accepted connection from 192.168.237.81:49535 2016.07.07 14:07:42 LOG3[0]: SSL_accept: Peer suddenly disconnected 2016.07.07 14:07:42 LOG5[0]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2016.07.07 14:07:42 LOG5[1]: Service [rabbitmq] accepted connection from 192.168.237.81:49536 2016.07.07 14:07:42 LOG3[1]: SSL_accept: 140890C7: error:140890C7:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:peer did not return a certificate But I haven't enabled client certificate verification! [dwiest@716161-compute2 ~]$ sudo grep verify /etc/stunnel/stunnel.conf ; verify = 2 I have to explicitly set verify to 0 or 1 in order to connect without a client cert. Is this intentional? The documentation suggests that by default no verification should be taking place. -Damian -- Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you have received this communication in error, please notify me by return e-mail, and destroy this communication and all copies thereof, including any attachments. Apervita ® is a registered trademark of Apervita Inc.

1 0

stunnel and hosts.allow
by Yousef Alhashemi 05 Jul '16

05 Jul '16

Hi, This may be a little bit off-topic, but does anyone here use stunnel with pan? My connections to stunnel (in pan) are always refused by libwrap. I was looking for the right rule to add to /etc/hosts.allow but nothing seems to work aside from "ALL : ALL" (which is obviously not good) and "nntps: KNOWN". Is the latter reasonable? The hosts_access(5) manpage is confusing to say the least. It mentions that daemon (the first token on any line) is the name of the daemon running the process, which would be "stunnel" in my case, but using "stunnel : LOCAL" or even "stunnel : ALL" doesn't work. The rule that seems to work, as mentioned, is "nntps : KNOWN" ("nntps" being the group name in stunnel.conf). What's even more confusing to me is that "nntps : LOCAL" does not work either. Nor does "nntps : localhost 127.0.0.1", "nntps : localhost", "nntps : 127.0.0.1", or "nntps : 192.168.1.". Pan is running on the same machine as stunnel so all connections must be coming from localhost. Why do these rules not trigger? Either way, I'd like to know the "least permissive" hosts.allow rule that would allow me to connect to my news provider from pan, and/or whether "nntps : KNOWN" is a safe option. Thanks, Yousef

3 6

Another OpenSSL 1.1.x patch - no ssl23.h any more
by Peter Pentchev 27 Jun '16

27 Jun '16

Hi, What do you think about the attached patch that fixes yet another OpenSSL 1.1.x compilation problem: the OpenSSL developers dropped the ssl23.h file altogether? Thanks for your work on stunnel! G'luck, Peter -- Peter Pentchev roam(a)ringlet.net roam(a)FreeBSD.org pp(a)storpool.com PGP key: http://people.FreeBSD.org/~roam/roam.key.asc Key fingerprint 2EE7 A7A5 17FC 124C F115 C354 651E EFB0 2527 DF13

1 0

Failed to redirect http to https
by Doris Hongmei 27 Jun '16

27 Jun '16

Hi Support, I setup stunnel to a web server with apache Configuration like below, --- /usr/local/etc/stunnel/stunnel.conf ---------- ; It is recommended to drop root privileges if stunnel is started by root setuid = nobody setgid = nobody ; TLS front-end to a web server [https] accept = 443 connect = 127.0.0.1:80 cert = /usr/local/etc/stunnel/stunnel.pem --- end of /usr/local/etc/stunnel/stunnel.conf ---------- After stunnel started, https://xxx/ is working, http://xxx/ is also still working , which doesn't redirect to https://xxx automatically. As my understanding, all the connections from http should redirect to https through stunnel, right? What steps did I miss? I need your help. Thanks. [Ericsson]<http://www.ericsson.com/> DORIS HONGMEI Software Configuration Mgmt Engineer BUSS SA OSS&BSS BL CPM DU SEP GZ RelGrp Ericsson 5&6F, No 44-46 Jianzhong Road 510630,Guangzhou,Tian He Software Park, China Mobile +8613922114721 Office +862085117729 doris.hongmei(a)ericsson.com www.ericsson.com [http://www.ericsson.com/current_campaign]<http://www.ericsson.com/current_campaign> Legal entity: Ericsson, registered office in CGC . This Communication is Confidential. We only send and receive email on the basis of the terms set out at www.ericsson.com/email_disclaimer<http://www.ericsson.com/email_disclaimer>

2 2

Re: [stunnel-users] FW: Stunnel with IIS8 on server 2012 64 bit
by J. Michael Drew 24 Jun '16

24 Jun '16

Jose, I have discovered what I did wrong. I did the original stunnel installs from the command line and then installed the stunnel service from the command line as well. When I installed the stunnel service it would break the website. So I removed the service (I thought) then I copied a shortcut to stunnel.exe to the Win start up> program folder. Both sites started working on the servers as long as I was logged in through an RDP session. I uninstalled everything and reinstalled. Stunnel 5.32 installs a Windows GUI on Server 2012 as well so I went back and used the Windows server 2012 desktop applications to install the windows service and to stop the GUI application. Everything is now working as expected. It appears that I was running two instances of stunnel at the same time and I didn’t completely remove the original stunnel service. Thanks for all of your help, Cheers, Michael From: Josealf.rm [mailto:[email protected]] Sent: Thursday, June 23, 2016 2:37 PM To: J. Michael Drew Subject: Re: [stunnel-users] FW: Stunnel with IIS8 on server 2012 64 bit Hi Michael, Did my last suggestions help with your issue? Regards El 20 jun 2016, a las 18:00, J. Michael Drew <jmichaeldrew(a)hotmail.com> escribió: .Jose, I appreciate your patience. Internet - Clients : 443 -> : https://website.company.com/website/ ________Firewall___________ Web\Presentation Layer 2 Win 2012 Webservers (443) not currently connected to the production LB, application needs to work before connecting to LB. This configuration is first time on 64 bit OS… Win 2012. IIS 8 running Jakarta ISAPI Filter\Stunnel to redirect 9001 to 9009: _________Firewall\App Layer________ Port 9009 Connects to App server running Apache Application is working as expected as long as I am logged in to the IIS 8 server. I can telnet to the APP layer over 9009 and I can reach these websites externally as expected. Firewalls are good. Please let me know any other information you need. Thank you again, Michael From: Jose Alf. [mailto:[email protected]] Sent: Monday, June 20, 2016 4:32 PM To: J. Michael Drew Subject: Re: [stunnel-users] FW: Stunnel with IIS8 on server 2012 64 bit Michael, Please take this in constructive way. I am trying to help, but it looks like you need to do some reading and homework. Please check http://catb.org/~esr/faqs/smart-questions.html <http://catb.org/%7Eesr/faqs/smart-questions.html> I suggest you draw a picture of your environment and explain well what you're trying to achieve. Show your client, your backend server, your stunnel server, include the IPs and ports they're listening to and everything should be easier. Don't forget any firewalls thay may be in the way. Regards, Jose. _____ From: J. Michael Drew <jmichaeldrew(a)hotmail.com> To: 'Jose Alf.' <josealf(a)rocketmail.com> Sent: Monday, June 20, 2016 1:00 PM Subject: RE: [stunnel-users] FW: Stunnel with IIS8 on server 2012 64 bit Hi Jose, I made the changes you suggested, but I am still getting the same behavior. My external address is: https://website.company.com/website I am not adding any ports to the address. Thanks so much for your help! Michael From: Jose Alf. [mailto:[email protected]] Sent: Monday, June 20, 2016 12:10 PM To: J. Michael Drew; stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] FW: Stunnel with IIS8 on server 2012 64 bit Michael, I guess what you want to do is to be able to connect to your internal Webserver via your Win2012 stunnel proxy using a URL like: https://yourwin2012dnsname:9001/ <https://yourwin2012dnsname:9009/> if that is correct, I suggest to adjust your configuration as follows: 1. Your stunnel mode must be server, not client. So adjust your service stanza as follows: [CLI9F529A0A] accept=9001 connect=10.xxx.xxx.xxx:9009 client=no 2. In your current configuration stunnel is listening only in the localhost ipv4 address (127.0.0.1). Therefore, you can only connect when you are logged on the server, you can't connect from a remote client. Hope this helps you clarify what's going on. Regards, Jose From: J. Michael Drew [mailto:[email protected]] Sent: Monday, June 20, 2016 9:54 AM To: 'Josealf.rm' Subject: RE: [stunnel-users] Stunnel with IIS8 on server 2012 64 bit Jose, Once logged in to the server I can open a browser on the server and connect through https://localhost/website and I can log in to the site externally as expected. Here are the log files from IIS and stunnel where stunnel is running as a service on the Windows 2012 server: When I am not logged in to the server it fails: #Software: Microsoft Internet Information Services 8.5 #Version: 1.0 #Date: 2016-06-20 00:30:21 #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken 2016-06-20 00:30:21 159.xxx.xxx.xxx HEAD / - 443 - 190.xxx.xxx.xxx - - 200 0 0 1218 #Software: Microsoft Internet Information Services 8.5 #Version: 1.0 #Date: 2016-06-20 05:41:01 #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken 2016-06-20 05:41:01 10.xxx.xxx.xxx OPTIONS /C$/windows/system32/NTDLL.DLL - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 200 0 0 500 2016-06-20 05:41:01 10.xxx.xxx.xxx PROPFIND /C$/windows/system32/NTDLL.DLL - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 46 2016-06-20 05:41:01 10.xxx.xxx.xxx PROPFIND /C$/windows/system32 - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 218 2016-06-20 05:41:16 10.xxx.xxx.xxx PROPFIND /patch-{682810b5-36dc-4e5d-81dd-6c02cd8f445b}-patchtoolsd.exe - 80 - 159.82.156.241 Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 64 62 2016-06-20 05:41:27 10.xxx.xxx.xxx PROPFIND /N$cl64.exe - 80 - 159.xxx.xxx.xxx 1 Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 62 2016-06-20 05:41:27 10.xxx.xxx.xxx PROPFIND /C$rome.dll - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 296 Stunell.conf: cert = extwebsvr_ver.pem ; Some performance tuning socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Peer Authentication verify = 2 CAfile = extwebsvr_root.pem ; Debug mode - useful for troubleshooting debug = 7 output = stunnel.log ; Client mode client = yes ; Setup tunnels to each EMS node [CLIxxxxxxxx)] accept=127.0.0.1:9001 connect=10.xxx.xxx.xxx:9009 Stunnel.log: 2016.06.20 09:17:39 LOG7[main]: No limit detected for the number of clients 2016.06.20 09:17:39 LOG5[main]: stunnel 5.27 on x86-pc-msvc-1500 platform 2016.06.20 09:17:39 LOG5[main]: Compiled/running with OpenSSL 1.0.2e-fips 3 Dec 2015 2016.06.20 09:17:39 LOG5[main]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2016.06.20 09:17:39 LOG7[main]: errno: (*_errno()) 2016.06.20 09:17:39 LOG5[main]: Reading configuration from file stunnel.conf 2016.06.20 09:17:39 LOG7[ui]: GUI message loop initialized 2016.06.20 09:17:39 LOG7[cron]: Cron thread initialized 2016.06.20 09:17:39 LOG5[main]: UTF-8 byte order mark detected 2016.06.20 09:17:39 LOG6[main]: Initializing service [CLI9F529A0A] 2016.06.20 09:17:39 LOG6[main]: Loading certificate from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Certificate loaded from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Loading private key from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Private key loaded from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG7[main]: Private key check succeeded 2016.06.20 09:17:39 LOG4[main]: Service [CLIxxxxxxxx] uses "verify = 2" without subject checks 2016.06.20 09:17:39 LOG4[main]: Use "checkHost" or "checkIP" to restrict trusted certificates 2016.06.20 09:17:39 LOG7[main]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2016.06.20 09:17:39 LOG5[main]: Configuration successful Thanks for your help, Michael From: Josealf.rm [mailto:[email protected]] Sent: Monday, June 20, 2016 8:01 AM To: J. Michael Drew Cc: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] Stunnel with IIS8 on server 2012 64 bit Michael, Is your stunnel running as a service? Please post sanitized logs and configuration for a better diagnostic ... Regards Jose El 20 jun 2016, a las 6:39, J. Michael Drew <jmichaeldrew(a)hotmail.com> escribió: Hi, I have a website on IIS8 and am using stunnel to forward requests over 9009 inside to my application server. When I log in to the IIS server and stay logged in everything works as expected. When I log off the IIS 8 web server my site is unreachable with a “service is unavailable”. Can someone help me? Sincere thanks, Michael _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

2 1

Re: [stunnel-users] FW: Stunnel with IIS8 on server 2012 64 bit
by J. Michael Drew 22 Jun '16

22 Jun '16

.Jose, I appreciate your patience. Internet - Clients : 443 -> : https://website.company.com/website/ ________Firewall___________ Web\Presentation Layer 2 Win 2012 Webservers (443) not currently connected to the production LB, application needs to work before connecting to LB. This configuration is first time on 64 bit OS… Win 2012. IIS 8 running Jakarta ISAPI Filter\Stunnel to redirect 9001 to 9009: _________Firewall\App Layer________ Port 9009 Connects to App server running Apache Application is working as expected as long as I am logged in to the IIS 8 server. I can telnet to the APP layer over 9009 and I can reach these websites externally as expected. Firewalls are good. Please let me know any other information you need. Thank you again, Michael From: Jose Alf. [mailto:[email protected]] Sent: Monday, June 20, 2016 4:32 PM To: J. Michael Drew Subject: Re: [stunnel-users] FW: Stunnel with IIS8 on server 2012 64 bit Michael, Please take this in constructive way. I am trying to help, but it looks like you need to do some reading and homework. Please check http://catb.org/~esr/faqs/smart-questions.html <http://catb.org/%7Eesr/faqs/smart-questions.html> I suggest you draw a picture of your environment and explain well what you're trying to achieve. Show your client, your backend server, your stunnel server, include the IPs and ports they're listening to and everything should be easier. Don't forget any firewalls thay may be in the way. Regards, Jose. _____ From: J. Michael Drew <jmichaeldrew(a)hotmail.com> To: 'Jose Alf.' <josealf(a)rocketmail.com> Sent: Monday, June 20, 2016 1:00 PM Subject: RE: [stunnel-users] FW: Stunnel with IIS8 on server 2012 64 bit Hi Jose, I made the changes you suggested, but I am still getting the same behavior. My external address is: https://website.company.com/website I am not adding any ports to the address. Thanks so much for your help! Michael From: Jose Alf. [mailto:[email protected]] Sent: Monday, June 20, 2016 12:10 PM To: J. Michael Drew; stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] FW: Stunnel with IIS8 on server 2012 64 bit Michael, I guess what you want to do is to be able to connect to your internal Webserver via your Win2012 stunnel proxy using a URL like: https://yourwin2012dnsname:9001/ <https://yourwin2012dnsname:9009/> if that is correct, I suggest to adjust your configuration as follows: 1. Your stunnel mode must be server, not client. So adjust your service stanza as follows: [CLI9F529A0A] accept=9001 connect=10.xxx.xxx.xxx:9009 client=no 2. In your current configuration stunnel is listening only in the localhost ipv4 address (127.0.0.1). Therefore, you can only connect when you are logged on the server, you can't connect from a remote client. Hope this helps you clarify what's going on. Regards, Jose From: J. Michael Drew [mailto:[email protected]] Sent: Monday, June 20, 2016 9:54 AM To: 'Josealf.rm' Subject: RE: [stunnel-users] Stunnel with IIS8 on server 2012 64 bit Jose, Once logged in to the server I can open a browser on the server and connect through https://localhost/website and I can log in to the site externally as expected. Here are the log files from IIS and stunnel where stunnel is running as a service on the Windows 2012 server: When I am not logged in to the server it fails: #Software: Microsoft Internet Information Services 8.5 #Version: 1.0 #Date: 2016-06-20 00:30:21 #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken 2016-06-20 00:30:21 159.xxx.xxx.xxx HEAD / - 443 - 190.xxx.xxx.xxx - - 200 0 0 1218 #Software: Microsoft Internet Information Services 8.5 #Version: 1.0 #Date: 2016-06-20 05:41:01 #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken 2016-06-20 05:41:01 10.xxx.xxx.xxx OPTIONS /C$/windows/system32/NTDLL.DLL - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 200 0 0 500 2016-06-20 05:41:01 10.xxx.xxx.xxx PROPFIND /C$/windows/system32/NTDLL.DLL - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 46 2016-06-20 05:41:01 10.xxx.xxx.xxx PROPFIND /C$/windows/system32 - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 218 2016-06-20 05:41:16 10.xxx.xxx.xxx PROPFIND /patch-{682810b5-36dc-4e5d-81dd-6c02cd8f445b}-patchtoolsd.exe - 80 - 159.82.156.241 Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 64 62 2016-06-20 05:41:27 10.xxx.xxx.xxx PROPFIND /N$cl64.exe - 80 - 159.xxx.xxx.xxx 1 Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 62 2016-06-20 05:41:27 10.xxx.xxx.xxx PROPFIND /C$rome.dll - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 296 Stunell.conf: cert = extwebsvr_ver.pem ; Some performance tuning socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Peer Authentication verify = 2 CAfile = extwebsvr_root.pem ; Debug mode - useful for troubleshooting debug = 7 output = stunnel.log ; Client mode client = yes ; Setup tunnels to each EMS node [CLIxxxxxxxx)] accept=127.0.0.1:9001 connect=10.xxx.xxx.xxx:9009 Stunnel.log: 2016.06.20 09:17:39 LOG7[main]: No limit detected for the number of clients 2016.06.20 09:17:39 LOG5[main]: stunnel 5.27 on x86-pc-msvc-1500 platform 2016.06.20 09:17:39 LOG5[main]: Compiled/running with OpenSSL 1.0.2e-fips 3 Dec 2015 2016.06.20 09:17:39 LOG5[main]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2016.06.20 09:17:39 LOG7[main]: errno: (*_errno()) 2016.06.20 09:17:39 LOG5[main]: Reading configuration from file stunnel.conf 2016.06.20 09:17:39 LOG7[ui]: GUI message loop initialized 2016.06.20 09:17:39 LOG7[cron]: Cron thread initialized 2016.06.20 09:17:39 LOG5[main]: UTF-8 byte order mark detected 2016.06.20 09:17:39 LOG6[main]: Initializing service [CLI9F529A0A] 2016.06.20 09:17:39 LOG6[main]: Loading certificate from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Certificate loaded from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Loading private key from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Private key loaded from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG7[main]: Private key check succeeded 2016.06.20 09:17:39 LOG4[main]: Service [CLIxxxxxxxx] uses "verify = 2" without subject checks 2016.06.20 09:17:39 LOG4[main]: Use "checkHost" or "checkIP" to restrict trusted certificates 2016.06.20 09:17:39 LOG7[main]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2016.06.20 09:17:39 LOG5[main]: Configuration successful Thanks for your help, Michael From: Josealf.rm [mailto:[email protected]] Sent: Monday, June 20, 2016 8:01 AM To: J. Michael Drew Cc: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] Stunnel with IIS8 on server 2012 64 bit Michael, Is your stunnel running as a service? Please post sanitized logs and configuration for a better diagnostic ... Regards Jose El 20 jun 2016, a las 6:39, J. Michael Drew <jmichaeldrew(a)hotmail.com> escribió: Hi, I have a website on IIS8 and am using stunnel to forward requests over 9009 inside to my application server. When I log in to the IIS server and stay logged in everything works as expected. When I log off the IIS 8 web server my site is unreachable with a “service is unavailable”. Can someone help me? Sincere thanks, Michael _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

2 1

MAC OS 32 bits
by Francisco Pereira 21 Jun '16

21 Jun '16

Is stunnel compatible with Mac Os 32-bit?Which installer should I consider for that?

1 0

FW: FW: Stunnel with IIS8 on server 2012 64 bit
by J. Michael Drew 20 Jun '16

20 Jun '16

From: J. Michael Drew [mailto:[email protected]] Sent: Monday, June 20, 2016 2:01 PM To: 'Jose Alf.' Subject: RE: [stunnel-users] FW: Stunnel with IIS8 on server 2012 64 bit Hi Jose, I made the changes you suggested, but I am still getting the same behavior. My external address is: https://website.company.com/website I am not adding any ports to the address. Thanks so much for your help! Michael From: Jose Alf. [mailto:[email protected]] Sent: Monday, June 20, 2016 12:10 PM To: J. Michael Drew; stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] FW: Stunnel with IIS8 on server 2012 64 bit Michael, I guess what you want to do is to be able to connect to your internal Webserver via your Win2012 stunnel proxy using a URL like: https://yourwin2012dnsname:9001/ <https://yourwin2012dnsname:9009/> if that is correct, I suggest to adjust your configuration as follows: 1. Your stunnel mode must be server, not client. So adjust your service stanza as follows: [CLI9F529A0A] accept=9001 connect=10.xxx.xxx.xxx:9009 client=no 2. In your current configuration stunnel is listening only in the localhost ipv4 address (127.0.0.1). Therefore, you can only connect when you are logged on the server, you can't connect from a remote client. Hope this helps you clarify what's going on. Regards, Jose From: J. Michael Drew [mailto:[email protected]] Sent: Monday, June 20, 2016 9:54 AM To: 'Josealf.rm' Subject: RE: [stunnel-users] Stunnel with IIS8 on server 2012 64 bit Jose, Once logged in to the server I can open a browser on the server and connect through https://localhost/website and I can log in to the site externally as expected. Here are the log files from IIS and stunnel where stunnel is running as a service on the Windows 2012 server: When I am not logged in to the server it fails: #Software: Microsoft Internet Information Services 8.5 #Version: 1.0 #Date: 2016-06-20 00:30:21 #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken 2016-06-20 00:30:21 159.xxx.xxx.xxx HEAD / - 443 - 190.xxx.xxx.xxx - - 200 0 0 1218 #Software: Microsoft Internet Information Services 8.5 #Version: 1.0 #Date: 2016-06-20 05:41:01 #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken 2016-06-20 05:41:01 10.xxx.xxx.xxx OPTIONS /C$/windows/system32/NTDLL.DLL - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 200 0 0 500 2016-06-20 05:41:01 10.xxx.xxx.xxx PROPFIND /C$/windows/system32/NTDLL.DLL - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 46 2016-06-20 05:41:01 10.xxx.xxx.xxx PROPFIND /C$/windows/system32 - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 218 2016-06-20 05:41:16 10.xxx.xxx.xxx PROPFIND /patch-{682810b5-36dc-4e5d-81dd-6c02cd8f445b}-patchtoolsd.exe - 80 - 159.82.156.241 Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 64 62 2016-06-20 05:41:27 10.xxx.xxx.xxx PROPFIND /N$cl64.exe - 80 - 159.xxx.xxx.xxx 1 Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 62 2016-06-20 05:41:27 10.xxx.xxx.xxx PROPFIND /C$rome.dll - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 296 Stunell.conf: cert = extwebsvr_ver.pem ; Some performance tuning socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Peer Authentication verify = 2 CAfile = extwebsvr_root.pem ; Debug mode - useful for troubleshooting debug = 7 output = stunnel.log ; Client mode client = yes ; Setup tunnels to each EMS node [CLIxxxxxxxx)] accept=127.0.0.1:9001 connect=10.xxx.xxx.xxx:9009 Stunnel.log: 2016.06.20 09:17:39 LOG7[main]: No limit detected for the number of clients 2016.06.20 09:17:39 LOG5[main]: stunnel 5.27 on x86-pc-msvc-1500 platform 2016.06.20 09:17:39 LOG5[main]: Compiled/running with OpenSSL 1.0.2e-fips 3 Dec 2015 2016.06.20 09:17:39 LOG5[main]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2016.06.20 09:17:39 LOG7[main]: errno: (*_errno()) 2016.06.20 09:17:39 LOG5[main]: Reading configuration from file stunnel.conf 2016.06.20 09:17:39 LOG7[ui]: GUI message loop initialized 2016.06.20 09:17:39 LOG7[cron]: Cron thread initialized 2016.06.20 09:17:39 LOG5[main]: UTF-8 byte order mark detected 2016.06.20 09:17:39 LOG6[main]: Initializing service [CLI9F529A0A] 2016.06.20 09:17:39 LOG6[main]: Loading certificate from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Certificate loaded from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Loading private key from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Private key loaded from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG7[main]: Private key check succeeded 2016.06.20 09:17:39 LOG4[main]: Service [CLIxxxxxxxx] uses "verify = 2" without subject checks 2016.06.20 09:17:39 LOG4[main]: Use "checkHost" or "checkIP" to restrict trusted certificates 2016.06.20 09:17:39 LOG7[main]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2016.06.20 09:17:39 LOG5[main]: Configuration successful Thanks for your help, Michael From: Josealf.rm [mailto:[email protected]] Sent: Monday, June 20, 2016 8:01 AM To: J. Michael Drew Cc: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] Stunnel with IIS8 on server 2012 64 bit Michael, Is your stunnel running as a service? Please post sanitized logs and configuration for a better diagnostic ... Regards Jose El 20 jun 2016, a las 6:39, J. Michael Drew <jmichaeldrew(a)hotmail.com> escribió: Hi, I have a website on IIS8 and am using stunnel to forward requests over 9009 inside to my application server. When I log in to the IIS server and stay logged in everything works as expected. When I log off the IIS 8 web server my site is unreachable with a “service is unavailable”. Can someone help me? Sincere thanks, Michael _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

1 0

Stunnel connection host address not appearing in sent message.
by Donald F. Coffin 20 Jun '16

20 Jun '16

I am using stunnel to enable SoapUI Mock Servers to support SSL connections. I am attempting to send the following SSL message: https://services.greenbuttondata.org/oauth/token?grant_type=client_credentia ls <https://services.greenbuttondata.org/oauth/token?grant_type=client_credenti als&scope=FB=39_40> &scope=FB=39_40 Using Wireshark, it appears the message being sent is POST /oauth/token?grant_type=client_credentials&scope=FB=39_40 which is receiving the following response: Error 404 (Not Found) The contents of the stunnel.conf file is: ; ***************************************************************** : * Service definitions (at least one service has to be defined) * ; ***************************************************************** ; ***************************************************************** ; * Resource Server * ; ***************************************************************** [resourceServer] accept=localhost:8080 connect=services.greenbuttondata.org:443 ciphers=AES128-SHA client=yes cert=/etc/stunnel/stunnel.pem verify=0 ; ***************************************************************** ; * Authorization Server * ; ***************************************************************** [authorizationServer] accept=localhost:8082 connect=services.greenbuttondata.org:443 ciphers=AES128-SHA client=yes cert=/etc/stunnel/stunnel.pem verify=0 [tpserver] accept=localhost:8444 connect=localhost:8081 cert=/etc/stunnel/stunnel.pem ciphers=AES128-SHA client=no verify=0 The HTTP log from SoapUI shows the following: "POST /oauth/token?grant_type=client_credentials&scope=FB=36_40 HTTP/1.1" "Accept-Encoding: gzip.deflate" "Content-Type: application/json" "Authorization: Basic UkVHSV... " (not shown for security) "Content-Length: 0" "Host: localhost:8082" "Connection: Keep-Alive" "User-Agent: Apache-HttpClient/4.1.1 (java 1.5)" "HTTP/1.1 404 Not Found" "Content-Type: text/html: charset=UTF-8" "Server: ghs" "Content-Length: 1623" "X-XSS-Protection: 1; mode=block" "X-Frame-Options: SAMEORIGIN" Through experimentation, the request only fails when using the stunnel proxy server, but works when sent directly to the targeted endpoint. Any assistance would be greatly appreciated. Best regards, Don Donald F. Coffin Technical Manager Green Button Alliance 2335 Dunwoody Crossing Suite E Dunwoody, GA 30338-8221 http://www.greenbuttonalliance.org <http://www.greenbuttonalliance.org/> (949) 636-8571 Mobile

1 0

FW: Stunnel with IIS8 on server 2012 64 bit
by J. Michael Drew 20 Jun '16

20 Jun '16

From: J. Michael Drew [mailto:[email protected]] Sent: Monday, June 20, 2016 9:54 AM To: 'Josealf.rm' Subject: RE: [stunnel-users] Stunnel with IIS8 on server 2012 64 bit Jose, Once logged in to the server I can open a browser on the server and connect through https://localhost/website and I can log in to the site externally as expected. Here are the log files from IIS and stunnel where stunnel is running as a service on the Windows 2012 server: When I am not logged in to the server it fails: #Software: Microsoft Internet Information Services 8.5 #Version: 1.0 #Date: 2016-06-20 00:30:21 #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken 2016-06-20 00:30:21 159.xxx.xxx.xxx HEAD / - 443 - 190.xxx.xxx.xxx - - 200 0 0 1218 #Software: Microsoft Internet Information Services 8.5 #Version: 1.0 #Date: 2016-06-20 05:41:01 #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken 2016-06-20 05:41:01 10.xxx.xxx.xxx OPTIONS /C$/windows/system32/NTDLL.DLL - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 200 0 0 500 2016-06-20 05:41:01 10.xxx.xxx.xxx PROPFIND /C$/windows/system32/NTDLL.DLL - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 46 2016-06-20 05:41:01 10.xxx.xxx.xxx PROPFIND /C$/windows/system32 - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 218 2016-06-20 05:41:16 10.xxx.xxx.xxx PROPFIND /patch-{682810b5-36dc-4e5d-81dd-6c02cd8f445b}-patchtoolsd.exe - 80 - 159.82.156.241 Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 64 62 2016-06-20 05:41:27 10.xxx.xxx.xxx PROPFIND /N$cl64.exe - 80 - 159.xxx.xxx.xxx 1 Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 62 2016-06-20 05:41:27 10.xxx.xxx.xxx PROPFIND /C$rome.dll - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 296 Stunell.conf: cert = extwebsvr_ver.pem ; Some performance tuning socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Peer Authentication verify = 2 CAfile = extwebsvr_root.pem ; Debug mode - useful for troubleshooting debug = 7 output = stunnel.log ; Client mode client = yes ; Setup tunnels to each EMS node [CLIxxxxxxxx)] accept=127.0.0.1:9001 connect=10.xxx.xxx.xxx:9009 Stunnel.log: 2016.06.20 09:17:39 LOG7[main]: No limit detected for the number of clients 2016.06.20 09:17:39 LOG5[main]: stunnel 5.27 on x86-pc-msvc-1500 platform 2016.06.20 09:17:39 LOG5[main]: Compiled/running with OpenSSL 1.0.2e-fips 3 Dec 2015 2016.06.20 09:17:39 LOG5[main]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2016.06.20 09:17:39 LOG7[main]: errno: (*_errno()) 2016.06.20 09:17:39 LOG5[main]: Reading configuration from file stunnel.conf 2016.06.20 09:17:39 LOG7[ui]: GUI message loop initialized 2016.06.20 09:17:39 LOG7[cron]: Cron thread initialized 2016.06.20 09:17:39 LOG5[main]: UTF-8 byte order mark detected 2016.06.20 09:17:39 LOG6[main]: Initializing service [CLI9F529A0A] 2016.06.20 09:17:39 LOG6[main]: Loading certificate from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Certificate loaded from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Loading private key from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Private key loaded from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG7[main]: Private key check succeeded 2016.06.20 09:17:39 LOG4[main]: Service [CLIxxxxxxxx] uses "verify = 2" without subject checks 2016.06.20 09:17:39 LOG4[main]: Use "checkHost" or "checkIP" to restrict trusted certificates 2016.06.20 09:17:39 LOG7[main]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2016.06.20 09:17:39 LOG5[main]: Configuration successful Thanks for your help, Michael From: Josealf.rm [mailto:[email protected]] Sent: Monday, June 20, 2016 8:01 AM To: J. Michael Drew Cc: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] Stunnel with IIS8 on server 2012 64 bit Michael, Is your stunnel running as a service? Please post sanitized logs and configuration for a better diagnostic ... Regards Jose El 20 jun 2016, a las 6:39, J. Michael Drew <jmichaeldrew(a)hotmail.com> escribió: Hi, I have a website on IIS8 and am using stunnel to forward requests over 9009 inside to my application server. When I log in to the IIS server and stay logged in everything works as expected. When I log off the IIS 8 web server my site is unreachable with a “service is unavailable”. Can someone help me? Sincere thanks, Michael _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

2 1

FW: Stunnel with IIS8 on server 2012 64 bit
by J. Michael Drew 20 Jun '16

20 Jun '16

From: J. Michael Drew [mailto:[email protected]] Sent: Monday, June 20, 2016 9:54 AM To: 'Josealf.rm' Subject: RE: [stunnel-users] Stunnel with IIS8 on server 2012 64 bit Jose, Once logged in to the server I can open a browser on the server and connect through https://localhost/website and I can log in to the site externally as expected. Here are the log files from IIS and stunnel where stunnel is running as a service on the Windows 2012 server: When I am not logged in to the server it fails: #Software: Microsoft Internet Information Services 8.5 #Version: 1.0 #Date: 2016-06-20 00:30:21 #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken 2016-06-20 00:30:21 159.xxx.xxx.xxx HEAD / - 443 - 190.xxx.xxx.xxx - - 200 0 0 1218 #Software: Microsoft Internet Information Services 8.5 #Version: 1.0 #Date: 2016-06-20 05:41:01 #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken 2016-06-20 05:41:01 10.xxx.xxx.xxx OPTIONS /C$/windows/system32/NTDLL.DLL - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 200 0 0 500 2016-06-20 05:41:01 10.xxx.xxx.xxx PROPFIND /C$/windows/system32/NTDLL.DLL - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 46 2016-06-20 05:41:01 10.xxx.xxx.xxx PROPFIND /C$/windows/system32 - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 218 2016-06-20 05:41:16 10.xxx.xxx.xxx PROPFIND /patch-{682810b5-36dc-4e5d-81dd-6c02cd8f445b}-patchtoolsd.exe - 80 - 159.82.156.241 Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 64 62 2016-06-20 05:41:27 10.xxx.xxx.xxx PROPFIND /N$cl64.exe - 80 - 159.xxx.xxx.xxx 1 Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 62 2016-06-20 05:41:27 10.xxx.xxx.xxx PROPFIND /C$rome.dll - 80 - 159.xxx.xxx.xxx Microsoft-WebDAV-MiniRedir/6.1.7601 - 404 0 2 296 Stunell.conf: cert = extwebsvr_ver.pem ; Some performance tuning socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Peer Authentication verify = 2 CAfile = extwebsvr_root.pem ; Debug mode - useful for troubleshooting debug = 7 output = stunnel.log ; Client mode client = yes ; Setup tunnels to each EMS node [CLIxxxxxxxx)] accept=127.0.0.1:9001 connect=10.xxx.xxx.xxx:9009 Stunnel.log: 2016.06.20 09:17:39 LOG7[main]: No limit detected for the number of clients 2016.06.20 09:17:39 LOG5[main]: stunnel 5.27 on x86-pc-msvc-1500 platform 2016.06.20 09:17:39 LOG5[main]: Compiled/running with OpenSSL 1.0.2e-fips 3 Dec 2015 2016.06.20 09:17:39 LOG5[main]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2016.06.20 09:17:39 LOG7[main]: errno: (*_errno()) 2016.06.20 09:17:39 LOG5[main]: Reading configuration from file stunnel.conf 2016.06.20 09:17:39 LOG7[ui]: GUI message loop initialized 2016.06.20 09:17:39 LOG7[cron]: Cron thread initialized 2016.06.20 09:17:39 LOG5[main]: UTF-8 byte order mark detected 2016.06.20 09:17:39 LOG6[main]: Initializing service [CLI9F529A0A] 2016.06.20 09:17:39 LOG6[main]: Loading certificate from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Certificate loaded from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Loading private key from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG6[main]: Private key loaded from file: extwebsvr_ver.pem 2016.06.20 09:17:39 LOG7[main]: Private key check succeeded 2016.06.20 09:17:39 LOG4[main]: Service [CLIxxxxxxxx] uses "verify = 2" without subject checks 2016.06.20 09:17:39 LOG4[main]: Use "checkHost" or "checkIP" to restrict trusted certificates 2016.06.20 09:17:39 LOG7[main]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2016.06.20 09:17:39 LOG5[main]: Configuration successful Thanks for your help, Michael From: Josealf.rm [mailto:[email protected]] Sent: Monday, June 20, 2016 8:01 AM To: J. Michael Drew Cc: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] Stunnel with IIS8 on server 2012 64 bit Michael, Is your stunnel running as a service? Please post sanitized logs and configuration for a better diagnostic ... Regards Jose El 20 jun 2016, a las 6:39, J. Michael Drew <jmichaeldrew(a)hotmail.com> escribió: Hi, I have a website on IIS8 and am using stunnel to forward requests over 9009 inside to my application server. When I log in to the IIS server and stay logged in everything works as expected. When I log off the IIS 8 web server my site is unreachable with a “service is unavailable”. Can someone help me? Sincere thanks, Michael _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

1 0

Stunnel with IIS8 on server 2012 64 bit
by J. Michael Drew 20 Jun '16

20 Jun '16

Hi, I have a website on IIS8 and am using stunnel to forward requests over 9009 inside to my application server. When I log in to the IIS server and stay logged in everything works as expected. When I log off the IIS 8 web server my site is unreachable with a "service is unavailable". Can someone help me? Sincere thanks, Michael

2 1

Compiling for Windows CE
by Bart de Waal 15 Jun '16

15 Jun '16

Hello, Are there more up to date instructions for compiling on Windows CE? I found the version here that works but is old and missing one of the features I need to connect to the server: http://www.usenix.org.uk/mirrors/stunnel/wce/ The instructions for building say you need evt2002web_min.exe, which as far as I can tell is no longer available. I can't get the newer version (evc4.exe) to work on a modern windows system (or under linux using wine) either. I think the CE version is still being used, as I saw references to it in the latest changelog. If someone has a more modern guide to building it I would appreciate it. Thanks, Bart de Waal

1 0

SSL Error
by Randall LeJeune 14 Jun '16

14 Jun '16

Hello. I am getting the following error when I try to run stunnel: [root@doadmzqas stunnel]# stunnel [ ] Clients allowed=31999 [.] stunnel 5.17 on powerpc-ibm-aix5.2.0.0 platform [.] Compiled/running with OpenSSL 1.0.1s 1 Mar 2016 [.] Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI [ ] errno: (*_Errno()) [.] Reading configuration from file /opt/freeware/etc/stunnel/stunnel.conf [.] UTF-8 byte order mark not detected [.] FIPS mode disabled [ ] Compression disabled [ ] Snagged 64 random bytes from /home/root/.rnd [ ] Wrote 1024 new random bytes to /home/root/.rnd [ ] PRNG seeded successfully [ ] Initializing service [sapdp3202] [ ] Loading certificate from file: /opt/freeware/etc/stunnel/stunnel.pem [!] error queue: 140DC002: error:140DC002:SSL routines:SSL_CTX_use_certificate_chain_file:system lib [!] error queue: 20074002: error:20074002:BIO routines:FILE_CTRL:system lib [!] SSL_CTX_use_certificate_chain_file: 2001002: error:02001002:system library:fopen:No such file or directory [!] Service [sapdp3202]: Failed to initialize SSL context The version is 5.17 as you can see above. My config file looks like this: ; Log file (enable for troubleshooting) output = /var/log/stunnel.log ; SSL Certificate and key files cert = /opt/freeware/etc/stunnel/stunnel.pem key = /opt/freeware/etc/stunnel/stunnel.key ; Restrict to FIPS compliant ciphers only ciphers = FIPS ; Force the SSL version to TLSv1 only sslVersion = TLSv1 ; The cipher list and SSL version restrictions above should make us ; _de_facto_ FIPS compliant; our OpenSSL library is *not* FIPS ; compliant, so this cannot be set to 'yes' fips = no [sapdp3202] client = yes accept = 127.0.0.1:3202 connect = doaprdssl.dot.com.gov:4709 The OS is AIX version 7. Does anybody have any idea what this means? Thanks in advance.

1 0

HTTP Strict Transport Security (HSTS) header
by Andrey 06 Jun '16

06 Jun '16

Hi! How I can enable HTTP Strict Transport Security (HSTS) header on stunnel ? Thank you Best regards, Andrey

2 1

openssl warning
by Vpn Bekhar 06 Jun '16

06 Jun '16

Hi, When I install stunnel on my windows server i see this error: stunnel warning can't open config file: /devel/win32/openssl/openssl.cnf please help me thank you so much best regards,

1 0

Broadband and stunnel weird behavior
by Javier 04 Jun '16

04 Jun '16

Hi, I was in doubt if post this or not because I couldn't replicate with enough similarities. But as it may be worth, if it is an actual bug, or help others... why not? Here I have to say that it is more noticeable under Windows 2000. That doesn’t mean doesn’t happen on higher OSs, but, from XP, it isn’t as noticeable. So, please, don’t stop reading here. But, hey, I know it is obsolete, and I know this is long and I’ll understand if you don’t want to read this. I tend to make a lot of “speed tests” because ISPs in my country… well, if you have luck, great, if not, brace yourself with the fights. Maybe as other countries :/ About February my download broadband was enhanced from 30Mb to 50Mb. This is important because is when it started all. With only 30Mb I didn’t notice any problem. “Speed tests“ were fine with “only” 30Mb and all matched the contracted speed and even a bit more. But when I had 50Mb I started to see some annoyances that sometimes was over 50Mb and others... if I had the luck to have 30Mb, it was a miracle. It wasn’t the test used. It was any test, with any technology (flash, html5, java, etc). The difference was just a couple of Mb. But all reflected the problems. They were so random, but something in common is that the tests didn’t show the correct speed at the end of my PC usage day. So I thought, something in memory, maybe, was causing it. But, also, it didn’t happen all days. At the end of the day, sometimes, I topped the 50Mb. And here starts the discarding process. I have a humble Pentium 4 and, even it is not powerful, one of the things I do (that I won’t explain why) is to throttle it (decrease speed). It is one of the first things I discarded, because as higher the broadband, the CPU load at full speed is higher as well. I only noticed a little improvement. This wasn’t the problem. Even I uninstalled the filter driver. So, if the CPU wasn’t the problem, programs should be. And I started with everything. And I left Stunnel as one of the latest. And there was the problem. When Stunnel is open, the speed cuts at about 30Mb. Yeah, I couldn’t believe myself either. After several tests, I discovered that Stunnel isn’t either the problem itself. The problem comes from the amount of services in .conf file. The more you have, the more speed problems you’ll have. I discovered this with the second instance of Stunnel I use for servers, which only has 7 services (3 SNI). I mainly use Stunnel as client for non-SSL aware programs and I have set 16 services. The options of .conf file, or services options, seems to don’t have much effect on speed tests. At the end, one way or another, the result is that if I open Stunnel, I can’t top full speed. I close it and voilà!, even during the same speed test. What is causing it? Probably just Windows 2000, or maybe not. Windows 2000 doesn’t have a connection limit as XP, one of the things I thought about. Anyway, I just wanted to shared this with you, just in case helps or anything. Regards. System specifications: Windows 2000 SP4 // XP SP2 (testing purposes) P4 2.8Ghz RAM 2GB RTL8139 Fast Ethernet Full Duplex

1 0

Re: [stunnel-users] Public domain [PATCH] support environment variables in config file
by Dmitry Bakshaev 31 May '16

31 May '16

2016-05-31 12:02 GMT+04:00 Pierre Delaage <delaage.pierre(a)free.fr>: > Hi Michal, > Did not have a look at the code yet, but should it be possible to replace > envvars usage by some keys in the registry on windows platform and/or > %userprofile%/config-file ? > why not just start stunnel with config parameter on command line? stunnel %USERPROFILE%/stunnel-config-file (windows) stunnel ${HOME}/stunnel-config-file (*nix)

2 1

Re: [stunnel-users] IPv4 and IPv6
by Konstantin Belousov 31 May '16

31 May '16

On Tue, May 31, 2016 at 08:04:24AM +0200, Micha?? Trojnara wrote: > On 31.05.2016 00:42, Konstantin Belousov wrote: > > I have a following configuration for the outgoing connection > > [XXX-1] > > client = yes > > accept = 127.0.0.1:1564 > > connect = some-server:9999 > > local = some-other-address > [cut] > > The socket was created with INET6 address family, but bind was done for > > INET AF. > > This is pretty much expected if "some-server:9999" is an IPv6 address > and "some-other-address" is an IPv4 address. The "local" option indeed > cannot handle a mix of IPv4 and IPv6 "connect" addresses. Usually some-server is the list of addresses, one of them is IPv4, and another is IPv6. This is the only reasonable way to name dual-stack host. > > What do you think might be a proper solution? I would expect that the code which binds the socket for connect(2), matched the address types before binding. A good implementation needs to iterate over the results of getaddrinfo(3) for remote host to try to connect to each returned address. In the same manner, when one outgoing address is attempted to connect to, the getaddrinfo(3) list for the local address would be iterated over, and first matched compatible address selected for binding. It seems that it is enough to match addrinfo pairs by ai_family/ai_socktype/ai_protocol, but you might also need to e.g. pay some attention to filter out IPv4 mapped to IPv6 entries. I am not sure how much additional plumbing is required to have local getaddrinfo(3) result in the local_bind().

1 0

IPv4 and IPv6
by Konstantin Belousov 30 May '16

30 May '16

Hi. I have a following configuration for the outgoing connection [XXX-1] client = yes accept = 127.0.0.1:1564 connect = some-server:9999 local = some-other-address Sometimes, or rather, quite regular, the connection to localhost port 1564 results in immediate connection close and logging the following: May 30 23:06:58 tom stunnel: LOG5[4]: Service [XXX-1] accepted connection from 127.0.0.1:12848 May 30 23:06:58 tom stunnel: LOG3[4]: local_bind (ephemeral port): Invalid argument (22) I traced the syscalls and see the following: 28196 stunnel CALL socket(PF_INET6,SOCK_STREAM,IPPROTO_IP) 28196 stunnel RET socket 10/0xa 28196 stunnel CALL fcntl(0xa,F_GETFL,0) 28196 stunnel RET fcntl 2 28196 stunnel CALL fcntl(0xa,F_SETFL,0x6<O_RDWR|O_NONBLOCK>) 28196 stunnel RET fcntl 0 28196 stunnel CALL fcntl(0xa,F_SETFD,FD_CLOEXEC) 28196 stunnel RET fcntl 0 28196 stunnel CALL bind(0xa,0x802808a6c,0x10) 28196 stunnel STRU struct sockaddr { AF_INET, 176.36.249.139:0 } 28196 stunnel RET bind -1 errno 22 Invalid argument The socket was created with INET6 address family, but bind was done for INET AF. Indeed, both some-server and some-other-address have both A and AAAA records, corresponding addresses are configured and functional. OS is FreeBSD, I was ensured that this combination (INET6 socket and INET bind) is not correct. It probably works sometime when first resolved addresses for names happen to come from the same address family, but when resolvers return different order, the situation above occurs. Disabling ipv6 support makes the connection work reliably, which confirms my observations. I am using stunnel 5.31. Would be nice to have this fixed. Thanks.

1 0

Public domain [PATCH] support environment variables in config file
by Dmitry Bakshaev 28 May '16

28 May '16

the problem frequently occurs on the client side: admin need to configure stunnel for multiple users. every user has own key, certificate, own permissions on file system (for log-files, etc) this patch allow to write flexible config. some examples: cert = %USERPROFILE%\.config\my.pem (windows) cert = ${HOME}/.config/my.pem (other) output = %APPDATA%\stunnel.log (windows) output = ${HOME}/stunnel.log (other) CAfile = %ALLUSERSPROFILE%\ourCAbundle.crt (windows) CAfile = /etc/ssl/certs/ourCAbundle.crt (other, not using variables) "secure" :) random port example: ... [srv1] accept = 127.0.0.1:%SRV1_PORT% (windows) accept = 127.0.0.1:${SRV1_PORT} (other) ... start stunnel (batch-file or shell-script): set SRV1_PORT=%RANDOM% (windows) limitations: 1. don't support unicode on windows (localized usernames, files, etc) 2. only ${NAME} syntax supported on *nix (not $NAME).

2 1

Potential performance degradation moving from Stunnel 5.06 to 5.32
by Mark Brookes 24 May '16

24 May '16

There might be a throughput degradation in the more recent versions of stunnel. I have recently been testing the 5.32 version of stunnel and have noticed that the tps drop quite significantly when moving from 5.06 to 5.32. Im willing to admit it could be something to do with my config or testing. But if anyone could offer some suggestions it would be much appreciated. The config is setup as follows - Stunnel VIP -> Haproxy. (I have configured haproxy to return a simple page). I am using a self signed 1024 bit certificate and the cipher I am using is ECDHE-RSA-AES256-GCM-SHA384 (I also tested with aNull:eNULL:MD5:LOW:HIGH and noticed a similar drop in performance) My Stunnel config is - setuid = stunnel pid = /var/run/stunnel/stunnel.pid debug = local1.0 socket = a:IP_FREEBIND=yes socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [VIP_Name-1] cert = /root/server1024.pem ciphers = ECDHE-RSA-AES256-GCM-SHA384 accept = 192.168.80.131:443 connect = 127.0.0.1:80 connect = 127.0.0.2:80 delay = no options = CIPHER_SERVER_PREFERENCE options = DONT_INSERT_EMPTY_FRAGMENTS renegotiation = no TIMEOUTclose = 0 My HAProxy config is - global daemon stats socket /var/run/haproxy.stat mode 600 level admin pidfile /var/run/haproxy.pid maxconn 100000 tune.maxrewrite 1024 nbproc 3 defaults #mode http #balance roundrobin timeout connect 4000 timeout client 42000 timeout server 43000 peers loadbalancer_replication peer lbmaster localhost:7778 peer lbslave localhost:7778 listen VIP_Name bind 127.0.0.1:80 transparent #bind 192.168.80.121:80 transparent monitor-uri / mode http errorfile 200 /etc/haproxy/200.http listen VIP_Name_2 monitor-uri / mode http bind 127.0.0.2:80 transparent errorfile 200 /etc/haproxy/200.http All the versions of stunnel mentioned here have been built against Openssl1.0.1s I am using siege to generate the load and issuing the following command - siege https://192.168.80.131 -t1M -c 15 -b The test is stop stunnel service, replace stunnel binary with different version, restart service, run test. The results im seeing are as follows (All results are quoted in transactions per second as reported by siege). v5.06 - 2233 v5.07 - 2229 v5.25 - 2171 v5.30 - 2092 v5.32 - 302 In my results you can see roughly a 200 tps drop from version 5.06 to v5.30 then when we get to v5.32 it drops further. To reiterate the only thing I am changing in my configuration is the stunnel binary. Everything else is remaining the same. Does anyone have any ideas what could be happening? Thankyou Mark

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users