stunnel-users

1 participants
3307 discussions

SSL23_GET_CLIENT_HELLO:unknown protocol
by Srilalitha Muralidhara(HCL Capital Market Services) 22 May '06

22 May '06

Hi I am getting SSL23_GET_CLIENT_HELLO:unknown protocol error stunnel. Any guesses about the cause of the problem? Here is the complete log 2006.05.22 07:01:55 LOG5[734:1]: stunnel 4.15 on sparc-sun-solaris2.6 with OpenSSL 0.9.8b 04 May 2006 2006.05.22 07:01:55 LOG5[734:1]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv4 Auth:LIBWRAP 2006.05.22 07:01:55 LOG6[734:1]: file ulimit = 64 (can be changed with 'ulimit -n') 2006.05.22 07:01:55 LOG6[734:1]: poll() used - no FD_SETSIZE limit for file descriptors 2006.05.22 07:01:55 LOG5[734:1]: 29 clients allowed 2006.05.22 07:01:55 LOG7[734:1]: FD 5 in non-blocking mode 2006.05.22 07:01:55 LOG7[734:1]: FD 6 in non-blocking mode 2006.05.22 07:01:55 LOG7[734:1]: FD 7 in non-blocking mode 2006.05.22 07:01:55 LOG7[734:1]: SO_REUSEADDR option set on accept socket 2006.05.22 07:01:55 LOG7[734:1]: rssvr bound to 10.140.42.11:25433 2006.05.22 07:01:55 LOG7[735:1]: Created pid file /home/sri/stunnel/var/lib/stunnel/stunnel.pid 2006.05.22 07:04:09 LOG7[735:1]: rssvr accepted FD=0 from 10.140.42.11:44360 2006.05.22 07:04:09 LOG7[735:4]: rssvr started 2006.05.22 07:04:09 LOG7[735:4]: FD 0 in non-blocking mode 2006.05.22 07:04:09 LOG7[735:4]: TCP_NODELAY option set on local socket 2006.05.22 07:04:09 LOG7[735:4]: FD 1 in non-blocking mode 2006.05.22 07:04:09 LOG7[735:4]: FD 2 in non-blocking mode 2006.05.22 07:04:09 LOG7[735:4]: Connection from 10.140.42.11:44360 permitted by libwrap 2006.05.22 07:04:09 LOG5[735:4]: rssvr connected from 10.140.42.11:44360 2006.05.22 07:04:09 LOG7[735:1]: Cleaning up the signal pipe 2006.05.22 07:04:09 LOG6[735:1]: Child process 938 finished with code 0 2006.05.22 07:04:09 LOG7[735:4]: SSL state (accept): before/accept initialization 2006.05.22 07:04:09 LOG3[735:4]: SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol 2006.05.22 07:04:09 LOG5[735:4]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.05.22 07:04:09 LOG7[735:4]: rssvr finished (0 left) Thanks, Sri Disclaimer: *********** The contents of this E-mail (including the contents of the enclosure(s) or attachment(s) if any) are privileged and confidential material of HCL Capital Market Services and should not be disclosed to, used by or copied in any manner by anyone other than the intended addressee(s). In case you are not the desired addressee, you should delete this message and/or re-direct it to the sender. The views expressed in this E-mail message (including the enclosure(s) or attachment(s) if any) are those of the individual sender, except where the sender expressly, and with authority, states them to be the views of HCL Capital Market Services. This e-mail message including attachment/(s), if any, is believed to be free of any virus. However, it is the responsibility of the recipient to ensure that it is virus free and HCL Capital Market Services is not responsible for any loss or damage arising in any way from its use.

1 0

stunnel-4.15 segfaulting and looping under FreeBSD-CURRENT
by Michael Weiser 17 May '06

17 May '06

Hi, I've run into the problem mentioned in: > Scott Tuc Ellentuch at T-B-O-H ml at t-b-o-h.net > Fri Apr 21 23:45:11 CEST 2006 > Hi, > I just did a portupgrade in FreeBSD from 4.14 to 4.15, and now it > seems to be looping the command that I asked it, instead of just doing > it once. Has there been an option added I need to tell it to just do > once? > Thanks, Tuc I'm running stunnel in client mode. It execs uucico which receives and sends uucp jobs via stdin/stdout. The first call to uucico actually succeeds. It seems like stunnel is segfaulting and then re-exec-ing when it would normally quit. A core file is created in the current directory. But stunnel never quits and indefinitely continues to re-exec itself. Has there been any progress in solving this problem? -- Thanks, Michael

2 3

FW: [stunnel-users] Re: Re:Need a help in installation (Craig)
by Craig 17 May '06

17 May '06

Oops, mailed it directly to Peng :-0, Sorry for that ;-) Re:Need a help in installation (Craig) >Thanks a lot! Craig. I use your method: > ./configure --prefix=/stunnel2 No Problem ;-) >It seems that installation is successful. It successfully generate a >directory ./stunnel2, in which there are six subdirectories: etc lib man >sbin share var That looks right >But when I run stunnel command in the teminal window. It does not take it as >a command. Is it supposed to run stunnel command after the installation or >not? Is there anything missing in the Mac machine before it can run stunnel? If you go to the directory " /stunnel2/sbin " without quotes, do you see 2 files named stunnel and stunnel3? If you see these files, you can execute the stunnel file with something like ./stunnel --help To display the options available to you for the daemon to run. Let me know if there is something else you require ;) Regards, Craig >Thanks >Peng > From: <stunnel-users-request(a)mirt.net> > Reply-To: <stunnel-users(a)mirt.net> > Date: Mon, 15 May 2006 12:00:06 +0200 (CEST) > To: <stunnel-users(a)mirt.net> > Subject: stunnel-users Digest, Vol 22, Issue 12 > > Send stunnel-users mailing list submissions to > stunnel-users(a)mirt.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://stunnel.mirt.net/mailman/listinfo/stunnel-users > or, via email, send a message with subject or body 'help' to > stunnel-users-request(a)mirt.net > > You can reach the person managing the list at > stunnel-users-owner(a)mirt.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of stunnel-users digest..." > > > Today's Topics: > > 1. RE: Need a help in installation (Craig) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 15 May 2006 08:15:36 +0200 > From: "Craig" <stunnel(a)rsw.co.za> > Subject: RE: [stunnel-users] Need a help in installation > To: <stunnel-users(a)mirt.net> > Message-ID: > <!&!AAAAAAAAAAAYAAAAAAAAADayToAwUd9AsHeKl2eRVAnCgAAAEAAAALWLI73av7VKpv9V31ec nQ > wBAAAAAA==(a)rsw.co.za> > > Content-Type: text/plain; charset="us-ascii" > > Don't know Mac, but can't u pass a prefix like in Linux to specify another > directory, for example your home directory? > > > > ./configure --prefix=/your/destination/directory > > > > Hope this helps > > > > Craig > > > > _____ > > From: stunnel-users-bounces(a)mirt.net [mailto:[email protected]] > On Behalf Of Peng He > Sent: 12 May 2006 11:45 PM > To: stunnel-users(a)mirt.net > Subject: [stunnel-users] Need a help in installation > > > > Hi, > > I want to install Stunnel 4.15 into MAC OS X machine. Somehow I do not have > the right to make any directory in /usr so I can not install Stunnel in > /usr/local. How do I install Stunnel into different directory? > > Thanks > Peng > >

1 0

Re: Re:Need a help in installation (Craig)
by Peng He 16 May '06

16 May '06

Thanks a lot! Craig. I use your method: ./configure --prefix=/stunnel2 It seems that installation is successful. It successfully generate a directory ./stunnel2, in which there are six subdirectories: etc lib man sbin share var But when I run stunnel command in the teminal window. It does not take it as a command. Is it supposed to run stunnel command after the installation or not? Is there anything missing in the Mac machine before it can run stunnel? Thanks Peng > From: <stunnel-users-request(a)mirt.net> > Reply-To: <stunnel-users(a)mirt.net> > Date: Mon, 15 May 2006 12:00:06 +0200 (CEST) > To: <stunnel-users(a)mirt.net> > Subject: stunnel-users Digest, Vol 22, Issue 12 > > Send stunnel-users mailing list submissions to > stunnel-users(a)mirt.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://stunnel.mirt.net/mailman/listinfo/stunnel-users > or, via email, send a message with subject or body 'help' to > stunnel-users-request(a)mirt.net > > You can reach the person managing the list at > stunnel-users-owner(a)mirt.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of stunnel-users digest..." > > > Today's Topics: > > 1. RE: Need a help in installation (Craig) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 15 May 2006 08:15:36 +0200 > From: "Craig" <stunnel(a)rsw.co.za> > Subject: RE: [stunnel-users] Need a help in installation > To: <stunnel-users(a)mirt.net> > Message-ID: > <!&!AAAAAAAAAAAYAAAAAAAAADayToAwUd9AsHeKl2eRVAnCgAAAEAAAALWLI73av7VKpv9V31ecnQ > wBAAAAAA==(a)rsw.co.za> > > Content-Type: text/plain; charset="us-ascii" > > Don't know Mac, but can't u pass a prefix like in Linux to specify another > directory, for example your home directory? > > > > ./configure --prefix=/your/destination/directory > > > > Hope this helps > > > > Craig > > > > _____ > > From: stunnel-users-bounces(a)mirt.net [mailto:[email protected]] > On Behalf Of Peng He > Sent: 12 May 2006 11:45 PM > To: stunnel-users(a)mirt.net > Subject: [stunnel-users] Need a help in installation > > > > Hi, > > I want to install Stunnel 4.15 into MAC OS X machine. Somehow I do not have > the right to make any directory in /usr so I can not install Stunnel in > /usr/local. How do I install Stunnel into different directory? > > Thanks > Peng > >

1 0

Need a help in installation
by Peng He 15 May '06

15 May '06

Hi, I want to install Stunnel 4.15 into MAC OS X machine. Somehow I do not have the right to make any directory in /usr so I can not install Stunnel in /usr/local. How do I install Stunnel into different directory? Thanks Peng

2 1

SSL2Proxy
by Steve Cohen 12 May '06

12 May '06

Hello all, I'm tyring to get around content based(notHostBased) int*rn*t cen$0ring. (don't want this page to be indexed with that keyword, so please don't wite it in your response). This is what I need to do: Set Browser on client machine to use <proxyX:port>, but I want content to be encrypted. The proxy is trusted(ownedByMe), everything else in between is not, after the proxy everything is trusted. So this would be the setup: SetupA: ClientBroswer <> STunnelOnRemoteServer <> LocalProxyServerOnSameServer(Squid) <> RestOfTheInternet And NOT this: SetupB: Browser<>LocalSTunnel<>RemoteSTunnel<>Proxy<>RestOfTheInternet Because I don't want any special kind of configuration on the client's local machine except for setting the proxy.(I am currently doing this via ssh tunneling) -I have squid running on remote server listening on 3128 and it works -I have stunnel running on remote server listening on 8686 and forwarding to localhost:3128, -I have Firefox set to use <myServer:8686> as proxy But when trying to use it, Firefox says connection reset.... Please tell me why this is happening and what I need to do. Feel free to make any suggestions you want, I won't be annoyed if you tell me something I already know. Thanks.

2 1

certificate unknown - error:14094416
by Ludovic DUFLOT 12 May '06

12 May '06

Hi, I tried to use stunnel to connect in SSL to a LDAP server. But I can't and I've got this error message: certificate unknown The certificate is self-signed. If I use stunnel for establishing connexion with IMAPS server with a self-signed certificate too, all is right but not for LDAP connexion. I searched on the list's archives and with google but I can't find any solution... Help !!! Ludo ps: these are the stunnel.conf and the log: *************************** cert = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Some debugging stuff useful for troubleshooting debug = 7 ;output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [ldaps] accept = 389 connect = 10.0.0.1:636 verify = 0 [imaps] accept = 143 connect = 10.0.0.2:993 *************************** 2006.05.03 07:52:50 LOG7[4436:5780]: ldaps connecting 10.0.0.1:636 2006.05.03 07:52:50 LOG7[4436:5780]: connect_wait: waiting 10 seconds 2006.05.03 07:52:50 LOG7[4436:5780]: connect_wait: connected 2006.05.03 07:52:50 LOG7[4436:5780]: Remote FD=244 initialized 2006.05.03 07:52:50 LOG7[4436:5780]: TCP_NODELAY option set on remote socket 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): before/connect initialization 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write client hello A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 read server hello A 2006.05.03 07:52:50 LOG5[4436:5780]: VERIFY IGNORE: depth=1, /C=FR/ST=Savoie/L=Chambery/O=Universite de Savoie/OU=DSI/CN=DSI CA/emailAddress=admin(a)univ-savoie.fr 2006.05.03 07:52:50 LOG5[4436:5780]: VERIFY IGNORE: depth=1, /C=FR/ST=Savoie/L=Chambery/O=Universite de Savoie/OU=DSI/CN=DSI CA/emailAddress=admin(a)univ-savoie.fr 2006.05.03 07:52:50 LOG5[4436:5780]: VERIFY IGNORE: depth=1, /C=FR/ST=Savoie/L=Chambery/O=Universite de Savoie/OU=DSI/CN=DSI CA/emailAddress=admin(a)univ-savoie.fr 2006.05.03 07:52:50 LOG5[4436:5780]: VERIFY IGNORE: depth=0, /C=FR/ST=Savoie/L=Chambery/O=Universite de Savoie/OU=DSI/CN=ldap-bourget.univ-savoie.fr 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 read server certificate A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 read server certificate request A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 read server done A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write client certificate A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write client key exchange A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write certificate verify A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write change cipher spec A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write finished A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 flush data 2006.05.03 07:52:50 LOG7[4436:5780]: SSL alert (read): fatal: certificate unknown 2006.05.03 07:52:50 LOG3[4436:5780]: SSL_connect: 14094416: error:14094416:SSL routines:SSL3_READ_BYTES:sslv3 alert certificate unknown 2006.05.03 07:52:50 LOG5[4436:5780]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.05.03 07:52:50 LOG7[4436:5780]: ldaps finished (0 left)

1 0

need HELP!! HELP!! with stunnel compile
by Nadav, Erez 10 May '06

10 May '06

Hi all, Hi all stunnel users. I want to debug and fix some TLS bugs with stunnel. I loaded stunnel 4.14 sources but i failed to compile it with visual studio 6, under windows 2000 environment. 1. Does anybody has the dsp file to be used under VC6++ for proper stunnel compilation ??? 2. Do I need any other libraries beside openssl to link ? I will appreciate any help Regards Erez __________________________________________________________________________________________ This electronic message contains information from Verint Systems, which may be privileged and confidential. The information is intended to be for the use of the individual(s)or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by replying to this email (1).

1 0

RE: [stunnel-users] stunnel use with TLS
by Nadav, Erez 10 May '06

10 May '06

I am using simple tcp/ip connection, which fail on the first hello message -----Original Message----- From: Scott Gifford [mailto:[email protected]] Sent: Wednesday, May 10, 2006 4:46 AM To: Nadav, Erez Cc: stunnel-users(a)mirt.net Subject: Re: [stunnel-users] stunnel use with TLS "Nadav, Erez" <Erez.Nadav(a)verint.com> writes: > > > Hi all, > > > > 1. Can I use stunnel as a client which connects in TLS protocol ? Assuming you mean over a channel that starts of plaintext and is later converted to encryption, the command to start TLS is usually specific to the application protocol. What protocol are you using? For example, SMTP, IMAP, ?... ---Scott. __________________________________________________________________________________________ This electronic message contains information from Verint Systems, which may be privileged and confidential. The information is intended to be for the use of the individual(s)or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by replying to this email (1).

1 0

problems installing stunnel 4.15
by David Arques Perolada 10 May '06

10 May '06

I get the following message after doing "make" /usr/lib/gcc/i586-suse-linux/4.0.2/../../../../i586-suse-linux/bin/ld: cannot find -lwrap collect2: ld returned 1 exit status make[1]: *** [stunnel] Error 1 make[1]: Leaving directory `/root/Stunnel/stunnel-4.15/src' make: *** [all-recursive] Error 1 All help will be welcome Thanks in advance David Arques i Perolada E-Mail : darques(a)uoc.edu

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users