- stunnel-users - stunnel.org

Critical error on stunnel 434 for WinCE/Windows Mobile: no service at all, because of failure in thread creation
by Pierre DELAAGE 26 Sep '10

26 Sep '10

Hello Michal, Maybe you remember me, I am the man that refreshed stunnel for winCE up to 4.27 version. Thank you for having included my code to your mainstream at that time. As a win32 regular programmer I always check that my code is as close as possible as that of the main win32 stream for PC. I am writing you today to point out a critical bug that prevent stunnel 4.34 from servicing any service at all . I have fixed that bug and will send you a refresh of all the sources (that needed some after some win32 PC version updates) soon. SO DO NOT DO ANYTHING. the bug is in sthread.c: the wince _beginthread port has been modified (by someone else but me) as this : v434: handle=CreateThread(NULL, stack_size, (LPTHREAD_START_ROUTINE)start_address, arglist, STACK_SIZE_PARAM_IS_A_RESERVATION, &thread_id); the "STACK_SIZE_PARAM_IS_A_RESERVATION" flag is the novelty from 4.27. The problem is that beginthread is being called from gui.c with stacksize=0 SO THAT a stack of 0 size "TRIES to be RESERVED" and then CreateThread FAILS to return a valid handle. That is to say that no thread is created, and thus NO TUNNELING SERVICE at all can be delivered. So stunnel cannot work at all. Solution : the proper call is : handle=CreateThread(NULL, stack_size, (LPTHREAD_START_ROUTINE)start_address, arglist, (stack_size > 0) ? STACK_SIZE_PARAM_IS_A_RESERVATION:0, &thread_id); I repeat and insist : please DO NOT DO anything to the code, as I will send soon a refresh with various other updates (because apart from that critical bug, the code needs other refresh to compile properly), and as I am also working on a refresh of openssl up to 1.0.0a (those gentlemen at openssl never included any wce patch to their mainstream, which is really a pity, but another story). See you soon, Thank you again for all the work you do for the community of people, Pierre

2 4

stunnel v4.32 & mac v10.6.3
by Cherry Ngai 25 Sep '10

25 Sep '10

Hello, I am new to stunnel. My stunnel v4.32 is installed to my mac v10.6.3 using MacPort. I am trying to setup active directory, but there is no process start when i run sudo /opt/local/bin/stunnel /opt/local/etc/stunnel/stunnel.conf There is no error msg after i run the command. I believe it could have something to do with my configuration? Having it running in debug mode, I can't find the created output file. Could someone help me? Or tell me where i can find the output file? Thanks! Stunnel seems successfully installed, as it has returned the following with the command "sudo stunnel -version" stunnel 4.32 on i686-apple-darwin10.3.0 with OpenSSL 1.0.0a 1 Jun 2010 Threading:PTHREAD SSL:ENGINE Sockets:SELECT,IPv6 Auth:LIBWRAP Global options debug = daemon.notice pid = /opt/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /opt/local/etc/stunnel/stunnel.pem ciphers = ALL:!aNULL:!eNULL:!SSLv2 session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none Here is my config: cert = /opt/local/etc/stunnel/stunnel.pem key = /opt/local/etc/stunnel/stunnel.pem sslVersion = SSLv3 chroot = /opt/local/var/lib/stunnel/ setuid = nobody setgid = nogroup pid = /stunnel.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = stunnel.log client = yes [ActiveDirectory1] accept = 391 connect = SOME_IP:636 Cheers, Cherry

1 0

Target version/timeframe for drawing identity certs from Windows cert store?
by Bucci, David G 22 Sep '10

22 Sep '10

Hi - in an exchange last week, Michal, it sounded like you might be planning on adding the capability/option to the Windows version to select an identity certificate from the Windows certificate store (because it turns out OpenSSL added some supporting infrastructure for doing so, if I understood correctly). For planning purposes, do you have any sense yet of whether that's really going to happen, and in what timeframe or what target version? I think that'd be a change of high interest to a lot of people ... one suggestion, it would help integrators if there was a way to configure a msg into whatever selection dialog that comes up, asking the user to select a certificate from their identity store. Thinking out loud -- probably also, in the case where multiple client tunnels are being set up, a way to make it either a global selection (for all client services), or a service specific selection -- hmm, though global only is probably fine, thinking about, since an integrator could always create a 2nd config, if a 2nd tunnel is needed Thinking further, you would probably want to be careful that it would work early on during login, since I imagine like us, integrators would want to start it from a user's Startup folder, or from a login script. I don't know Windows well enough to know if that constrains you (if the window mgr is up during login script exec, etc.). Thx! ---- David G. Bucci If you can't think of anything kind to say, could you at least have the decency to be vague?

1 0

Server side logging, no connection details logged
by Bucci, David G 22 Sep '10

22 Sep '10

Hi - using Stunnel to enforce client certificate based authentication, and as part of that, we want to log accesses, and the CN used to access, on the server side (kind of an audit log). On the client side, with debug set to 7, we get details about the connection, the SSL steps in the handshake, etc. - but on the server side, even with debug = 7, we're not seeing any info at all about the connections that are occurring. Sooo ... is there a way to enable such logging on the server side of the tunnel? Or possibly turn on independent logging in the OpenSSL libs that are used? I looked, but haven't found anything online about this. Thx! ---- David G. Bucci If you can't say anything nice, at least have the decency to be vague.

1 2

FIPS compliance
by Bucci, David G 21 Sep '10

21 Sep '10

The documentation on fips= seems ambiguous to me ... does leaving it at the default of "yes" /prevent/ FIPS 140-2 compliance mode, or mandate it? Or does it do something else I'm not understanding? Basically, the q. is, what do you have to configure to ensure that you're operating in a FIPS 140-2 compliant manner (at least, as the version of OpenSSL libs bundled understood it)? Do you have to specify ciphers that are validated, etc.? Or just set that config option to "yes" ("no"?)? And how can one tell if the stunnel binary in use was compiled with FIPS support active? (I'm using the Windows 4.33 binary d/l'ed from mirt.net). Tia! ---- David G. Bucci Chuck Norris can kick through all 6 degrees of separation, hitting anyone, anywhere, in the face, at any time. -- ChuckNorrisFacts.com

2 1

Large performance difference: Solaris vs Linux
by Cliffe, Stephen 20 Sep '10

20 Sep '10

Hi, I've just been comparing the performance of stunnel on Solaris 10 & Linux (Centos 5.5) and am seeing a big difference. I'm using stunnel 4.33 compiled with the same options on both platforms and the tcpstress benchmarking tool (http://stunnel.mirt.net/?page=perf). On a Dell 780 running Solaris 10 I got 163.31 connections/second but on an older, slower Dell 620 running Linux I got 408.01 connections/second. Both machines were otherwise idle. Does anyone know why there would be such a big difference between the two OS's? Thanks, Steve. Steve Cliffe Senior Engineer - Development Infrastructure Team Andrew Network Solutions Asia Pacific [ Address : Andrew Corporation Building (39), Northfields Avenue, Wollongong University, NSW, Australia 2500 ] [ Postal Address : PO Box U40, Wollongong University, NSW, Australia 2500 ] [ Tel : +61 2 4221 2991] [ Fax : +61 2 4221 2901 ] [ Email : Stephen.Cliffe(a)andrew.com] Visit Andrew on the Web at www.andrew.com<http://www.andrew.com/> [cid:[email protected]][cid:[email protected]]

3 5

Generically referencing file locations in stunnel.conf
by Bucci, David G 20 Sep '10

20 Sep '10

Hi - I'm back to trying to run Stunnel with a different user certificate for each user. So far, the best technique I've found is to have a separate stunnel.conf for each user (in their home directory, which is referenced by envvar %USERPROFILE%), and run stunnel using that configuration file. As part of that, I'm trying to generically reference file locations (log, user certificates) in the .conf. But I haven't found a way short of fully pathing the locations in the .conf e.g. "output=c:\users\dbucci\stunnel\stunnel.log". That's undesirable, because it means I have to make every user's .conf unique. So ... is there a generic way to accomplish this? I've tried setting the "Start In" location in the Windows shortcut to that location (via envvar %USERPROFILE%, which allows me to make every user's shortcut generic), then saying "output=.\stunnel.log", but without success - it seems to always be using c:\program files\stunnel as it's starting point for reference. Likewise, the envvar isn't usable in the .conf Note that I thought about creating a subdir per user in C:\program files\stunnel (with appropriate perms for that user), but can't, because in many of our deployment locations, users aren't permitted to write to c:\program files. Btw, this is why I'm asking about the commandline parms in Windows - I don't seem to be able to get them to work, but if I could, I could say e.g. "-o %USERPROFILE%\stunnel\stunnel.log", and that would work generically for every user. Likewise, I could use "-A %USERPROFILE&\stunnel\usercert.pem" and have a generic way of installing user certs. Heck, if I could set ALL the options via command line (-c, -r, etc.) I would love to simply do away with a user-specific .conf file. So ... sorry for rambling a bit, but any help with the intent of what I'm trying to accomplish, make as generic as possible a user-specific config setup? Thx! ---- David G. Bucci Chuck Norris can kick through all 6 degrees of separation, hitting anyone, anywhere, in the face, at any time. -- ChuckNorrisFacts.com

2 2

Command line args available on Windows version 4.33?
by Bucci, David G 20 Sep '10

20 Sep '10

Hi - are all the command line arguments documented at http://www.stunnel.org/faq/args.html#ToC1 available in the Windows 4.33 version? When you execute stunnel -V, very few are listed. And if they are available, do they take precedence over a configuration file, if one is used? (Is a .conf mandatory, or can you set all the required options via command line in the Windows version?) Thx! ---- David G. Bucci Chuck Norris can kick through all 6 degrees of separation, hitting anyone, anywhere, in the face, at any time. -- ChuckNorrisFacts.com

2 1

Accept connections only from local processes?
by Bucci, David G 20 Sep '10

20 Sep '10

Hi - I'm looking to configure Stunnel in client mode to accept connections only from the PC it's running on. Would the config option "socket = a:SO_BINDTODEVICE=lo" accomplish that? And would this work on Windows? (is there a "lo" interface on Windows?) I'm going to do some testing, but thought I'd ask in case someone already knows I'll be pounding sand. And before anyone asks, turning on a firewall isn't an option - we don't have control of all the PCs involved. ---- David G. Bucci Chuck Norris can kick through all 6 degrees of separation, hitting anyone, anywhere, in the face, at any time. -- ChuckNorrisFacts.com

2 1

(no subject)
by Sunil Karumuri 17 Sep '10

17 Sep '10

Hello- I am new to Stunnel and have a basic architecture question. I have Stunnel installed on box A where it receives http messages from multiple client processes . Stunnel sends them to box B via https (mutual ssl). We are seeing that Stunnel opens one connection for each client processes. Can we configure Stunnel to have only ONE SSL connection (or a pool of connections) between box A and B and have Stunnel use the open connection for all traffic from various clients ? We would like to avoid the overhead of SSL-handshake for each new client process. Thanks for the help. Sunil

3 2

Hey buddy, can you review a log file?
by Jay Sprenkle 08 Sep '10

08 Sep '10

Good afterrnoon, Can anyone review the stunnel log file below and see if there's any indication of a problem? What we're doing with stunnel: We're using stunnel to encrypt a tcp connection between a client and our server. What's happening: A client is reporting the connection fails. I believe it's a timeout issue on the client software. My interpretation of this log is that the session is open about 4 seconds then closed by the client. Is that correct? Thanks in advance Stunnel Log: 2010.09.08 14:34:38 LOG7[1392:2328]: Service exchange started 2010.09.08 14:34:38 LOG7[1392:2328]: FD=200 in non-blocking mode 2010.09.08 14:34:38 LOG5[1392:2328]: Service exchange accepted connection from 127.0.0.1:2340 2010.09.08 14:34:38 LOG7[1392:2328]: FD=224 in non-blocking mode 2010.09.08 14:34:38 LOG6[1392:2328]: connect_blocking: connecting xxx.242.123.150:7443 2010.09.08 14:34:38 LOG7[1392:2328]: connect_blocking: s_poll_wait xxx.242.123.150:7443: waiting 10 seconds 2010.09.08 14:34:38 LOG5[1392:2328]: connect_blocking: connected xxx.242.123.150:7443 2010.09.08 14:34:38 LOG5[1392:2328]: Service exchange connected remote server from 192.168.1.29:2341 2010.09.08 14:34:38 LOG7[1392:2328]: Remote FD=224 initialized 2010.09.08 14:34:38 LOG7[1392:2328]: SSL state (connect): before/connect initialization 2010.09.08 14:34:38 LOG7[1392:2328]: SSL state (connect): SSLv3 write client hello A 2010.09.08 14:34:38 LOG7[1392:2328]: SSL state (connect): SSLv3 read server hello A 2010.09.08 14:34:39 LOG7[1392:2328]: SSL state (connect): SSLv3 read server certificate A 2010.09.08 14:34:39 LOG7[1392:2328]: SSL state (connect): SSLv3 read server done A 2010.09.08 14:34:39 LOG7[1392:2328]: SSL state (connect): SSLv3 write client key exchange A 2010.09.08 14:34:39 LOG7[1392:2328]: SSL state (connect): SSLv3 write change cipher spec A 2010.09.08 14:34:39 LOG7[1392:2328]: SSL state (connect): SSLv3 write finished A 2010.09.08 14:34:39 LOG7[1392:2328]: SSL state (connect): SSLv3 flush data 2010.09.08 14:34:39 LOG7[1392:2328]: SSL state (connect): SSLv3 read finished A 2010.09.08 14:34:39 LOG7[1392:2328]: 1 items in the session cache 2010.09.08 14:34:39 LOG7[1392:2328]: 1 client connects (SSL_connect()) 2010.09.08 14:34:39 LOG7[1392:2328]: 1 client connects that finished 2010.09.08 14:34:39 LOG7[1392:2328]: 0 client renegotiations requested 2010.09.08 14:34:39 LOG7[1392:2328]: 0 server connects (SSL_accept()) 2010.09.08 14:34:39 LOG7[1392:2328]: 0 server connects that finished 2010.09.08 14:34:39 LOG7[1392:2328]: 0 server renegotiations requested 2010.09.08 14:34:39 LOG7[1392:2328]: 0 session cache hits 2010.09.08 14:34:39 LOG7[1392:2328]: 0 external session cache hits 2010.09.08 14:34:39 LOG7[1392:2328]: 0 session cache misses 2010.09.08 14:34:39 LOG7[1392:2328]: 0 session cache timeouts 2010.09.08 14:34:39 LOG6[1392:2328]: SSL connected: new session negotiated 2010.09.08 14:34:39 LOG6[1392:2328]: Negotiated ciphers: RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 2010.09.08 14:34:44 LOG7[1392:2328]: SSL socket closed on SSL_read 2010.09.08 14:34:44 LOG7[1392:2328]: Socket write shutdown 2010.09.08 14:34:44 LOG5[1392:2328]: Connection closed: 8 bytes sent to SSL, 48 bytes sent to socket 2010.09.08 14:34:44 LOG7[1392:2328]: Service exchange finished (0 left) -- --- "Is real reporting dead? News at 11!"

1 0

Re: [stunnel-users] Individual user certs for each person who uses Windows PC
by Bucci, David G 07 Sep '10

07 Sep '10

Thx for replying, Scott ... how did you handle multiple users on the PC, though? They all shared that cert? I thought about having a single location and copying to there on user login (from a standard location in a user's home dir, e.g.) ... then firing up stunnel ... but it seems like so much can go wrong, resulting in User B accessing using User A's certificate (because the copy failed, e.g.). And we're leery of exposing User A's cert to User B - especially since stunnel doesn't support encryption of the user's key, right? So the permissions would be a little tricky and maybe fragile. Seems like there should be a straightforward way to do it, dadnabit! ________________________________ From: Scott Gifford <sgifford(a)suspectclass.com> To: Bucci, David G Cc: stunnel-users(a)mirt.net <stunnel-users(a)mirt.net> Sent: Mon Aug 30 17:41:09 2010 Subject: EXTERNAL: Re: [stunnel-users] Individual user certs for each person who uses Windows PC On Mon, Aug 30, 2010 at 3:41 PM, Bucci, David G <david.g.bucci(a)lmco.com<mailto:[email protected]>> wrote: [ ... ] I've tried using envvars in the stunnel.conf (e.g., cert = %USERPROFILE%\usercert.pem), tried adjusting the command line to include "-p %USERPROFILE%\usercert.pem" as an option ... We implemented something similar by simply making a "C:\stunnel" directory on each PC, naming the certificate the same thing on all machines, then hardcoding that path into the stunnel configuration (e.g. "C:\stunnel\usercert.pem"). Not quite as nice as %USERPROFILE%\usercert.pem, but it worked. :-) Hope this is helpful, ----Scott.

5 11

Honor --sysconfdir and --localstatedir in stunnel.conf-sample.in
by Sebastian Kayser 01 Sep '10

01 Sep '10

Hi, I am packaging stunnel for opencsw.org. Would you guys mind merging a patch [1] to make use of --sysconfdir and --localstatedir (instead of @prefix@/{etc,var}) in the sample configuration file? Currently, if --sysconfdir and --localstatedir are passed to ./configure and are not a directory below prefix, the configuration file doesn't reflect this layout. The patch is against 4.33. Fedora seems to carry the same change [2]. Sebastian [1]http://gar.svn.sf.net/svnroot/gar/csw/mgar/pkg/stunnel/trunk/files/0001-M… [2]http://lists.fedoraproject.org/pipermail/scm-commits/2010-March/413078.ht…

3 4

[[email protected]: Bug#594876: stunnel4: Fails to connect, "Input line too long"]
by Rodrigo Gallardo 31 Aug '10

31 Aug '10

----- Forwarded message from Harri Kiiskinen <harri.kiiskinen(a)utu.fi> ----- Date: Mon, 30 Aug 2010 13:26:07 +0300 From: Harri Kiiskinen <harri.kiiskinen(a)utu.fi> To: Debian Bug Tracking System <submit(a)bugs.debian.org> Subject: Bug#594876: stunnel4: Fails to connect, "Input line too long" Package: stunnel4 Version: 3:4.29-1local1 Severity: normal My Univ. recently updated their mail servers, and I could not read my mails anymore with Emacs/mew, that uses stunnel4 for encryption. It turned out the reason was, that the server responded with this string: * OK [CAPABILITY STARTTLS CAPABILITY IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY UNSELECT SORT LANGUAGE IDLE XSENDER X-NETSCAPE XSERVERINFO X-SUN-SORT X-SUN-IMAP X-ANNOTATEMORE X-UNAUTHENTICATE XUM1 AUTH=PLAIN AUTH=PLAIN] Messaging Multiplexor (Sun Java(tm) System Messaging Server 7.3-11.01 (built Sep 1 2009)) It turned out that this was way much longer than what stunnel4 expects. In common.h, one finds #define STRLEN 256 When this is changed to #define STRLEN 512 and the package recompiled, everything works well. Perhaps the length of accepted strings should be increased? Or is this long a response against some standard? All the best, Harri K. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-3-686 (SMP w/1 CPU core) Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages stunnel4 depends on: ii adduser 3.112 add and remove users and groups ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libssl0.9.8 0.9.8o-1 SSL shared libraries ii libwrap0 7.6.q-19 Wietse Venema's TCP wrappers libra ii netbase 4.42 Basic TCP/IP networking system ii openssl 0.9.8o-1 Secure Socket Layer (SSL) binary a ii perl-modules 5.10.1-14 Core Perl modules stunnel4 recommends no packages. Versions of packages stunnel4 suggests: pn logcheck-database <none> (no description available) -- Configuration Files: /etc/stunnel/stunnel.conf changed [not included] -- no debconf information ----- End forwarded message ----- -- Rodrigo Gallardo

2 1

Individual user certs for each person who uses Windows PC
by Bucci, David G 30 Aug '10

30 Aug '10

Hi, all - I've searched, but can't find any answer on this. Is it possible to configure stunnel with client certificates on, and in such a way that individual users who logon have their own individual certificate used? I've tried using envvars in the stunnel.conf (e.g., cert = %USERPROFILE%\usercert.pem), tried adjusting the command line to include "-p %USERPROFILE%\usercert.pem" as an option ... the closest I've been able to think of (and it's a pretty blunt sword) is to create individual services, one per user and listening on different ports, then having each user access a different URL (well, different port#) ... I would prefer this all work when running as a Windows service, but if it's necessary to train the users to hit a start menu entry or something (e.g., if there's a way to do it using envvars on command line parameters), then the world probably won't end ... This is on Windows, but I'd also appreciate knowing how to do the same on Linux. Thx! ---- David G. Bucci When Dr. Bruce Banner becomes angry, he changes into the Incredible Hulk; when the Incredible Hulk becomes angry, he changes into Chuck Norris. -- ChuckNorrisFacts.com

2 1

Cross-compiling stunnel woes feedback
by Martin van den Nieuwelaar 30 Aug '10

30 Aug '10

Hi everyone (again). I thought I'd post some feedback regarding cross-compiling stunnel, which I have successfully done for an Arm based embedded system we use. I had to edit the 'configure' script in order to remove three sections of code that just check for the cross compiling option, and if set simply exit (message 'cannot check for file existence when cross compiling'). This behaviour really isn't condusive to successful cross compiling. :-) So as I say I removed these sections of code. Next, I configured with './configure --host=arm-linux', then 'make' and the rest are standard as usual. Perhaps the configure script for future releases could be a little more friendly for those cross compiling? Editing the configure file shouldn't be necessary. -- R A Ward Ltd. | We take the privacy of our customers seriously. Christchurch | All sensitive E-Mail attachments MUST be encrypted. New Zealand

2 2

"stunnel -version"
by Felix E. Klee 30 Aug '10

30 Aug '10

I installed the official stunnel 4.33 binary on Windows XP/32. And, when I execute "stunnel -version", a popup window appears with the following message: --------------------------- stunnel 4.33 on Win32 (not configured) --------------------------- Stunnel server is down due to an error. You need to exit and correct the problem. Click OK to see the error log window. --------------------------- OK --------------------------- Shouldn't that just work? What may be the cause for the problem? Indeed, I didn't configure stunnel yet. But I also realized that when I change something - for example the log level - in "stunnel.conf", then this is ignored by "stunnel -version". After clicking "OK" to close the popup message, I get some more info, though meaningless to me: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 1.0.0 29 Mar 2010 Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 Global options debug = notice RNDbytes = 64 RNDoverwrite = yes service = stunnel taskbar = yes Service-level options cert = stunnel.pem ciphers = ALL:!aNULL:!eNULL:!SSLv2 session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none Server is down

2 4

Updated stunnel version in Debian experimental
by Rodrigo Gallardo 28 Aug '10

28 Aug '10

I have just uploaded stunnel 4.33 to Debian experimental. amd64 packages will be available for download as soon as the automated processing is done (6-12 hours). Other architectures will follow as the autobuilders get time in their queues for us. Aside from the updates in stunnel itself, the packaging has been updated somewhat. In particular, the start/stop scripts in /etc/init.d have grown shinny new options to take advantage of configuration file reloading and the log rotation config takes advantage of them to avoid the long standing issue of having to either live with ever-growing logs, or killing long lived connections when rotating. I would be very glad if you would test those new scripts and report any and all bugs. To Debian's BTS, of course, as none of them are at all the fault of our most excellent upstream ;) As much as I'd have liked to upload it to unstable, the distribution is now in freeze in preparation for the upcoming release, and thus uploading a completely new version of stunnel, together with the packaging changes I made would be completely unacceptable. I will upload this version, together with any bug fixes we collect, as soon as the release is over and sid is unfrozen again. Sadly, that means that the next Debian stable will release with 4.29. For that I am sorry, and I promise to make a backport of 4.33 available as soon as possible after the release. -- Rodrigo yes-I-have-been-remise-as-maintainer Gallardo

1 0

Is it possible for stunnel to reject client connections if the server end cannot connect?
by Martin van den Nieuwelaar 27 Aug '10

27 Aug '10

Hi all. I took a look (manually) through the last year of archives, but didn't find anything on this issue. The situation is as follows. Say we have two machines set up, ClientPC and ServerPC. On ClientPC I run stunnel accepting a connection on a local port and connecting to an stunnel port on ServerPC. On ServerPC I run stunnel accepting a connection on the local stunnel port and connecting to the 'encryption unaware' server on another port on the same ServerPC machine. OK, pretty simple stuff so far. The problem is, when I connect to ClientPC with the 'encryption unaware' client app. then I always get a successful connection, even if there is no server running on ServerPC. Of course once the client has a successful connection, it then performs a write(), and that fails with 'Connection reset by peer'. Really, since there is no server running on ServerPC, I want the connect() to stunnel on ClientPC to fail. Is there a way to do this? The alternative (which is a kludge), is to make the client 'stunnel aware' (yuk!), and to tell it whether it's connecting over stunnel on a per connection basis (yuk!). Then it can know whether it needs to look at the connect() or the write() to know whether the server is not running. Yuk! Or am I overlooking something simple? :-) -- R A Ward Ltd. | We take the privacy of our customers seriously. Christchurch | All sensitive E-Mail attachments MUST be encrypted. New Zealand

1 0

Problem with 2048 bits SSL sertificate with stunnel
by Georgi Georgiev 23 Aug '10

23 Aug '10

Hello to all, We get 2048 bits wildcard certificate for our domain *.domain.com .. And we are using thawte as Certificate Authority . So they send as two certificates .. One for SSL web and one intermediate certificate .. The stunnel configuration is : [https1] cert = /etc/stunnel/domain.crt CAfile = /etc/stunnel/domain.intermediate.crt key = /etc/stunnel/domain.key.nopass verify = 0 accept = x.x.x.x:443 connect = x.x.x.x:81 xforwardedfor=yes even I use verify = 0 some of our clients still complains that on some pages ( like blabla.domain.com ) server wants some of their private certificate to be send to the server !! and it's happens only with Internet Explorer 8.0 without verify and CAfile commands IE 8.0 works fine but Mozilla Firefox claim that can find CA be trusted ! wildcard certificate cannot be reissued with 1024 bits key . So is there some mistake in my configuration ? If not what can I do about it ? Thanks in advance .. P.S.: version of stunnel is 4.20 with XForwardedFor patch ..

2 1

stunnel and loading keys from hw devices
by Victor Wagner 20 Aug '10

20 Aug '10

Hello, all I've tried to use stunnel with keys on the hardware device, supported by OpenSSL engine and encountered some minor problems: 1. Under Unix systems stunnel doesn't provide UI_METHOD for ENGINE_load_private_key. It passes NULL there and engine complains that no user interface provided. On Unix in many cases default UI_METHOD provided by OpenSSL would do So, replacing line 302 in the ctx.c (line number are given for release 4.33) from uim=NULL ; to uim=UI_OpenSSL(); would significanly improve stunnel functionality. 2. OpenSSL UI objects have two methods to pass arbitraty pointers along 1. generic ex_data based macros UI_set_app_data/UI_get_app_data 2. UI-specific UI_add_user_data/UI_get0_user_data Unfortunately app-specific pointer is set inside engine and retrieved inside a callback, which belongs to application. So author of an engine and author of an application should somehow agree on which metod to use. All engines shipped with OpenSSL (ones which do provide load_private_key method) use UI_add_user_data to pass data to the callback. stunnel's pin_cb (for Win32 version of stunnel in the gui.c) uses UI_get_app_data to retrieve ui_data. I wonder what engine was used when this code was developed and debugged. And it does no check if any meaningful pointer is obtained. I suggest to add following code after line 602 in gui.c: /* if set_app_Data haven't-return anything */ if (!ui_data) ui_data=UI_get0_user_data(ui); /* if still no avail */ if (!ui_data) { s_log(LOG_ERR,"Engine haven't passed our callback data to callback. Sorry!"); return 0; } Or instead of complaining we can use some structure, local to function pin_cb as fallback UI_DATA - just as password buffer, and check if ui_data->section is not NULL before reading ui_data->section->key in the pass_proc (line 543 of gui.c) Thus it would work even with really broken engines which do not pass userdata from ENGINE_load_private_key to UI callbacks at all. ----- End forwarded message -----

2 1

stunnel and mod_gnutls
by Yclept Nemo 15 Aug '10

15 Aug '10

I run a mod_gnutls (0.5.5)<->apache (2.2.8) webserver which behaves perfectly normally outside of stunnel: GnuTLSEnable on GnuTLSPriorities SECURE256 GnuTLSExportCertificates on .. When a connection is closed and apache signals the mod_gnutls process to quit, the log records: GnuTLS: Handshake Failed (-8) 'A record packet with illegal version was received.' Invalid method in request NS * HTTP/1.0 ::1 - - [15/Aug/2010:03:31:26 -0400] "NS * HTTP/1.0" 501 512 "-" "Apache/2.2.8 (Ubuntu) ... (internal dummy connection)" This lets me easily identify apache2 process turnovers However, when I connect to this server through stunnel, I receive random dropouts. For example, if I were to upload 200 test files to this server, on average 15 transfers would fail. Stunnel logs (excerpt): 2010.08.15 04:11:25 LOG5[29287:3074030448]: Connection reset: 94 bytes sent to SSL, 523 bytes sent to socket 2010.08.15 04:12:21 LOG5[29287:3074448240]: Connection reset: 94 bytes sent to SSL, 523 bytes sent to socket 2010.08.15 04:12:34 LOG5[29287:3074030448]: Connection reset: 94 bytes sent to SSL, 523 bytes sent to socket And my apache2 logs are flooded with: Invalid method in request \x16\x03\x01 # ... over and over and over ... Invalid method in request \x16\x03\x01 # ... this is a tls hello sequence, as though the webserver were not running mod_gnutls ::1 - - [15/Aug/2010:03:31:26 -0400] "NS * HTTP/1.0" 501 512 "-" "Apache/2.2.8 (Ubuntu) ... (internal dummy connection)" The apache logs show new apache2 processes / new ssl connections being created every 2-5 seconds. A normal connections lasts much longer. stunnel configuration debug=7 foreground=yes client=yes syslog=no pid=/absolute/path/to/stunnel.pid libwrap=no [https] accept=127.0.0.1:11111 connect=my.website.net:myport sslVersion=TLSv1 an excerpt from the stunnel log: 2010.08.15 04:11:25 LOG6[29287:3074030448]: SSL connected: previous session reused 2010.08.15 04:11:25 LOG7[29287:3073960816]: Service https started 2010.08.15 04:11:25 LOG7[29287:3073960816]: FD=19 in non-blocking mode 2010.08.15 04:11:25 LOG5[29287:3073960816]: Service https accepted connection from 127.0.0.1:52674 2010.08.15 04:11:25 LOG7[29287:3073960816]: FD=20 in non-blocking mode 2010.08.15 04:11:25 LOG6[29287:3073960816]: connect_blocking: connecting 44.205.51.83:12389 2010.08.15 04:11:25 LOG7[29287:3073960816]: connect_blocking: s_poll_wait 44.205.51.83:12389: waiting 10 seconds 2010.08.15 04:11:25 LOG5[29287:3073960816]: connect_blocking: connected 44.205.51.83:12389 2010.08.15 04:11:25 LOG5[29287:3073960816]: Service https connected remote server from 192.168.1.8:51590 2010.08.15 04:11:25 LOG7[29287:3073960816]: Remote FD=20 initialized 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL state (connect): before/connect initialization 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL state (connect): SSLv3 write client hello A 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL state (connect): SSLv3 read server hello A 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL state (connect): SSLv3 read finished A 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL state (connect): SSLv3 write change cipher spec A 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL state (connect): SSLv3 write finished A 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL state (connect): SSLv3 flush data 2010.08.15 04:11:25 LOG7[29287:3073960816]: 1 items in the session cache 2010.08.15 04:11:25 LOG7[29287:3073960816]: 42 client connects (SSL_connect()) 2010.08.15 04:11:25 LOG7[29287:3073960816]: 42 client connects that finished 2010.08.15 04:11:25 LOG7[29287:3073960816]: 0 client renegotiations requested 2010.08.15 04:11:25 LOG7[29287:3073960816]: 0 server connects (SSL_accept()) 2010.08.15 04:11:25 LOG7[29287:3073960816]: 0 server connects that finished 2010.08.15 04:11:25 LOG7[29287:3073960816]: 0 server renegotiations requested 2010.08.15 04:11:25 LOG7[29287:3073960816]: 41 session cache hits 2010.08.15 04:11:25 LOG7[29287:3073960816]: 0 external session cache hits 2010.08.15 04:11:25 LOG7[29287:3073960816]: 0 session cache misses 2010.08.15 04:11:25 LOG7[29287:3073960816]: 0 session cache timeouts 2010.08.15 04:11:25 LOG6[29287:3073960816]: SSL connected: previous session reused 2010.08.15 04:11:25 LOG3[29287:3074030448]: SSL socket closed on SSL_read with 7 byte(s) in buffer 2010.08.15 04:11:25 LOG5[29287:3074030448]: Connection reset: 94 bytes sent to SSL, 523 bytes sent to socket 2010.08.15 04:11:25 LOG7[29287:3074030448]: Service https finished (4 left) 2010.08.15 04:11:25 LOG7[29287:3073960816]: SSL socket closed on SSL_read 2010.08.15 04:11:25 LOG7[29287:3073960816]: Socket write shutdown 2010.08.15 04:11:25 LOG5[29287:3073960816]: Connection closed: 94 bytes sent to SSL, 523 bytes sent to socket 2010.08.15 04:11:25 LOG7[29287:3073960816]: Service https finished (3 left) 2010.08.15 04:11:26 LOG7[29287:3074448240]: SSL socket closed on SSL_read 2010.08.15 04:11:26 LOG7[29287:3074448240]: Socket write shutdown 2010.08.15 04:11:26 LOG5[29287:3074448240]: Connection closed: 1110 bytes sent to SSL, 77962 bytes sent to socket 2010.08.15 04:11:26 LOG7[29287:3074517872]: SSL socket closed on SSL_read 2010.08.15 04:11:26 LOG7[29287:3074517872]: Socket write shutdown 2010.08.15 04:11:26 LOG7[29287:3074448240]: Service https finished (2 left) 2010.08.15 04:11:26 LOG5[29287:3074517872]: Connection closed: 575 bytes sent to SSL, 4889 bytes sent to socket 2010.08.15 04:11:26 LOG7[29287:3074517872]: Service https finished (1 left) 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL socket closed on SSL_read 2010.08.15 04:11:26 LOG7[29287:3074378608]: Socket write shutdown 2010.08.15 04:11:26 LOG5[29287:3074378608]: Connection closed: 573 bytes sent to SSL, 48787 bytes sent to socket 2010.08.15 04:11:26 LOG7[29287:3074378608]: Service https finished (0 left) 2010.08.15 04:11:26 LOG7[29287:3074520768]: Service https accepted FD=11 from 127.0.0.1:52676 2010.08.15 04:11:26 LOG7[29287:3074378608]: Service https started 2010.08.15 04:11:26 LOG7[29287:3074378608]: FD=11 in non-blocking mode 2010.08.15 04:11:26 LOG5[29287:3074378608]: Service https accepted connection from 127.0.0.1:52676 2010.08.15 04:11:26 LOG7[29287:3074378608]: FD=12 in non-blocking mode 2010.08.15 04:11:26 LOG6[29287:3074378608]: connect_blocking: connecting 44.205.51.83:12389 2010.08.15 04:11:26 LOG7[29287:3074378608]: connect_blocking: s_poll_wait 44.205.51.83:12389: waiting 10 seconds 2010.08.15 04:11:26 LOG5[29287:3074378608]: connect_blocking: connected 44.205.51.83:12389 2010.08.15 04:11:26 LOG5[29287:3074378608]: Service https connected remote server from 192.168.1.8:51592 2010.08.15 04:11:26 LOG7[29287:3074378608]: Remote FD=12 initialized 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL state (connect): before/connect initialization 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL state (connect): SSLv3 write client hello A 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL state (connect): SSLv3 read server hello A 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL state (connect): SSLv3 read finished A 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL state (connect): SSLv3 write change cipher spec A 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL state (connect): SSLv3 write finished A 2010.08.15 04:11:26 LOG7[29287:3074378608]: SSL state (connect): SSLv3 flush data My questions are: Why does this happen (why only with stunnel), and how can I prevent/avoid this? Sincerely,

2 2

help - SSL bandwidth overhead with using different ciphers
by Slim Ben Mahmoud 30 Jul '10

30 Jul '10

Dear SSL experts, In order to assess the performances of an adaptive security algorithm using SSL, I need to measure the network overhead induced by the establishment of SSL tunnels. The experiment aims to measure the bandwidth consumptions (or throughputs) when SSL tunnels are established using the different ciphers implemented in Stunnel (AES256-SHA or RC4-SHA for instance). Do you think that I have to expect a different throughput when I use different ciphers for every tunnels or the overhead is the pretty much the same? In fact, the first results show no difference between the throughputs no matter the cipher I use. I know that SSL overhead is traditionally measured in delay or latency because of the handshake phase (the encryption process time is negligible on the new CPUs) but this is not what i want to show. I hope that my request is enough clear, let me know if it is not the case. Best regards. --Slim

2 1

Proxy for content filtering
by Raj 29 Jul '10

29 Jul '10

Hi All I want to build a proxy server, which acts as man in the middle proxy. The main intention of application is to do content filtering, whether it is an http or https request. I want to block some specified URL. Can anybody tell me what is the best approach of doing this Thanks, Raj Rajmohan SK

1 0

Re: [stunnel-users] stunnel-users Digest, Vol 72, Issue 2
by TONY WESTENHOFER 07 Jul '10

07 Jul '10

stunnel-users-request(a)mirt.net wrote: >Send stunnel-users mailing list submissions to > stunnel-users(a)mirt.net > >To subscribe or unsubscribe via the World Wide Web, visit > http://stunnel.mirt.net/mailman/listinfo/stunnel-users >or, via email, send a message with subject or body 'help' to > stunnel-users-request(a)mirt.net > >You can reach the person managing the list at > stunnel-users-owner(a)mirt.net > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of stunnel-users digest..." > > >Today's Topics: > > 1. Re: telnetd and tcp_wrappers (Spence, Thomas Civ 844 CS/SCOX) > 2. change openssl version with configure (Bhavna Jhunjhunwala) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Tue, 6 Jul 2010 08:28:11 -0400 >From: "Spence, Thomas Civ 844 CS/SCOX" <Thomas.Spence(a)pentagon.af.mil> >Subject: Re: [stunnel-users] telnetd and tcp_wrappers >To: "stunnel-users(a)mirt.net" <stunnel-users(a)mirt.net> >Message-ID: > <751B1F405F4AFF4D907BD567538A83FB04FFE0B6DA(a)tequilasunrise.pentagon.ncr.ds.af.mil> > >Content-Type: text/plain; charset="us-ascii" > >2 guys did help me and still no luck... > >Anyone who tried this: > >[tssl] >accept = 992 >exec = /usr/sbin/telnetd > >Let me know... Reason why I am asking you because when I log off the server then stunnel's process stopped running but I want it keep running after logoff. Before I changed 'exec = /usr/sbin/telnetd', it was 'connect = 23' and the stunnel's process ran great and never stop running... Strange. > >I really need your help. Thanks. > >--------------- >Tom Spence >ABIDES SYSTEM SUPPORT >844th CS/SCOX > > > >------------------------------ > >Message: 2 >Date: Tue, 6 Jul 2010 17:41:42 -0400 >From: Bhavna Jhunjhunwala <bhavnaj(a)quantitativebrokers.com> >Subject: [stunnel-users] change openssl version with configure >To: stunnel-users(a)mirt.net >Message-ID: > <AANLkTikGWuO2XbF8-rtOTMyfeHVdeUV8TZGJvmYfKekB(a)mail.gmail.com> >Content-Type: text/plain; charset="iso-8859-1" > >Hi, > >I have stunnel version as below installed on Mac: > >s*tunnel 4.33 on i386-apple-darwin10.2.0 with OpenSSL 0.9.8k 25 Mar 2009* >*Threading:PTHREAD SSL:ENGINE Sockets:SELECT,IPv6 Auth:LIBWRAP* >* * >*Global options* >*debug = daemon.notice* >*pid = /usr/local/var/run/stunnel/stunnel.pid* >*RNDbytes = 64* >*RNDfile = /dev/urandom* >*RNDoverwrite = yes* >* * >*Service-level options* >*cert = /usr/local/etc/stunnel/stunnel.pem* >*ciphers = ALL:!aNULL:!eNULL:!SSLv2* >*session = 300 seconds* >*stack = 65536 bytes* >*sslVersion = SSLv3 for client, all for server* >*TIMEOUTbusy = 300 seconds* >*TIMEOUTclose = 60 seconds* >*TIMEOUTconnect = 10 seconds* >*TIMEOUTidle = 43200 seconds* >*verify = none* > >I would like to upgrade the openssl version to 1.0.0a, so I do >./configure --with-ssl=dir >make >make install > >After make install i get below error: > >*make install* >*Making install in src* >*test -z "/usr/local/bin" || ../auto/install-sh -c -d "/usr/local/bin"* >* /bin/sh ../libtool --mode=install /usr/bin/install -c 'stunnel' >'/usr/local/bin/stunnel'* >*/usr/bin/install -c stunnel /usr/local/bin/stunnel* >*test -z "/usr/local/bin" || ../auto/install-sh -c -d "/usr/local/bin"* >* /usr/bin/install -c 'stunnel3' '/usr/local/bin/stunnel3'* >*test -z "/usr/local/lib/stunnel" || ../auto/install-sh -c -d >"/usr/local/lib/stunnel"* >* /bin/sh ../libtool --mode=install /usr/bin/install -c 'libstunnel.la' >'/usr/local/lib/stunnel/libstunnel.la'* >*/usr/bin/install -c .libs/libstunnel.dylib >/usr/local/lib/stunnel/libstunnel.dylib* >*/usr/bin/install -c .libs/libstunnel.lai /usr/local/lib/stunnel/ >libstunnel.la* >*----------------------------------------------------------------------* >*Libraries have been installed in:* >* /usr/local/lib/stunnel* >* >* >*If you ever happen to want to link against installed libraries* >*in a given directory, LIBDIR, you must either use libtool, and* >*specify the full pathname of the library, or use the `-LLIBDIR'* >*flag during linking and do at least one of the following:* >* - add LIBDIR to the `DYLD_LIBRARY_PATH' environment variable* >* during execution* >* >* >*See any operating system documentation about shared libraries for* >*more information, such as the ld(1) and ld.so(8) manual pages.* >*----------------------------------------------------------------------* >*make[2]: Nothing to be done for `install-data-am'.* >*Making install in doc* >*make[2]: Nothing to be done for `install-exec-am'.* >*test -z "/usr/local/share/doc/stunnel" || ../auto/install-sh -c -d >"/usr/local/share/doc/stunnel"* >* /usr/bin/install -c -m 644 'stunnel.html' >'/usr/local/share/doc/stunnel/stunnel.html'* >* /usr/bin/install -c -m 644 'stunnel.pl.html' >'/usr/local/share/doc/stunnel/stunnel.pl.html'* >* /usr/bin/install -c -m 644 'stunnel.fr.html' >'/usr/local/share/doc/stunnel/stunnel.fr.html'* >*test -z "/usr/local/share/man/man8" || ../auto/install-sh -c -d >"/usr/local/share/man/man8"* >*mkdir: /usr/local/share/man/man8: Permission denied* >*make[2]: *** [install-man8] Error 1* >*make[1]: *** [install-am] Error 2* > > > >and when I check the stunnel version it still uses the old ssl version. >Am I doing something wrong here? > >-- >Thanks, >Bhavna >Quantitative Brokers >646 293 1808 > > >DISCLAIMER: >This e-mail and any attachments are for the confidential use of the >intended recipient. If you are not the intended recipient of this >message you are hereby notified that any review, dissemination, >distribution or copying of this message is strictly prohibited. This >communication is for information purposes only and should not be >regarded as an offer to sell or as a solicitation of an offer to buy >any investment product, an official confirmation of any transaction >or an official statement of Quantitative Brokers, LLC. > >E-mail transmissions cannot be guaranteed to be secure or error-free. >Therefore, we do not represent that this information is complete or >accurate and it should not be relied upon as such. > >All information is subject to change without notice. >Quantitative Brokers may, at its discretion, monitor and review the >content of all e-mail communications. >

1 0

problem with "verify=0"
by wujot＠home.pl 07 Jul '10

07 Jul '10

Hello everybody, The basic SSL negotiation requires the exchange of nine SSL messages. If client authentication is required, server can send additional message "certificate request". But this message is optional. I'm using stunnel ver. 4.27 for Win and 4.28 for Linux. In both cases stunnel, working as server, is sending "certificate request" message to the client, regardless of "verify" state, even with "verify=0". When "verify=0", server doesn't care about client's certificate. So, what for server sends this message? The part of my configuration and log is bellow: [test] accept = 60000 connect = 192.168.3.15:4679 client = no ;verify = 0 verify = none ciphers=DES-CBC3-SHA session = 3600 2010.07.07 12:53:35 LOG7[2412:4280]: SSL state (accept): before/accept initialization 2010.07.07 12:53:35 LOG7[2412:4280]: SSL state (accept): SSLv3 read client hello A 2010.07.07 12:53:35 LOG7[2412:4280]: SSL state (accept): SSLv3 write server hello A 2010.07.07 12:53:35 LOG7[2412:4280]: SSL state (accept): SSLv3 write certificate A 2010.07.07 12:53:35 LOG7[2412:4280]: SSL state (accept): SSLv3 write certificate request A <-------------???!!! 2010.07.07 12:53:35 LOG7[2412:4280]: SSL state (accept): SSLv3 flush data 2010.07.07 12:53:42 LOG6[2412:4280]: VERIFY IGNORE: depth=1, /C= .............. 2010.07.07 12:53:42 LOG5[2412:4280]: CRL: verification passed 2010.07.07 12:53:42 LOG5[2412:4280]: VERIFY OK: depth=1, /C= .......... 2010.07.07 12:53:42 LOG6[2412:4280]: VERIFY IGNORE: depth=0, /C= ................ 2010.07.07 12:53:42 LOG5[2412:4280]: CRL: verification passed 2010.07.07 12:53:42 LOG5[2412:4280]: VERIFY OK: depth=0, /C= .......................... 2010.07.07 12:53:42 LOG7[2412:4280]: SSL state (accept): SSLv3 read client certificate A 2010.07.07 12:53:42 LOG7[2412:4280]: SSL state (accept): SSLv3 read client key exchange a 2010.07.07 12:53:42 LOG7[2412:4280]: SSL state (accept): SSLv3 read certificate verify A 2010.07.07 12:53:42 LOG7[2412:4280]: SSL state (accept): SSLv3 read finished A 2010.07.07 12:53:42 LOG7[2412:4280]: SSL state (accept): SSLv3 write change cipher spec A 2010.07.07 12:53:42 LOG7[2412:4280]: SSL state (accept): SSLv3 write finished A So, my question is: how to remove "certificate request" message from stunnel-as-server negotiation? Regards, Wojtek

1 0

change openssl version with configure
by Bhavna Jhunjhunwala 06 Jul '10

06 Jul '10

Hi, I have stunnel version as below installed on Mac: s*tunnel 4.33 on i386-apple-darwin10.2.0 with OpenSSL 0.9.8k 25 Mar 2009* *Threading:PTHREAD SSL:ENGINE Sockets:SELECT,IPv6 Auth:LIBWRAP* * * *Global options* *debug = daemon.notice* *pid = /usr/local/var/run/stunnel/stunnel.pid* *RNDbytes = 64* *RNDfile = /dev/urandom* *RNDoverwrite = yes* * * *Service-level options* *cert = /usr/local/etc/stunnel/stunnel.pem* *ciphers = ALL:!aNULL:!eNULL:!SSLv2* *session = 300 seconds* *stack = 65536 bytes* *sslVersion = SSLv3 for client, all for server* *TIMEOUTbusy = 300 seconds* *TIMEOUTclose = 60 seconds* *TIMEOUTconnect = 10 seconds* *TIMEOUTidle = 43200 seconds* *verify = none* I would like to upgrade the openssl version to 1.0.0a, so I do ./configure --with-ssl=dir make make install After make install i get below error: *make install* *Making install in src* *test -z "/usr/local/bin" || ../auto/install-sh -c -d "/usr/local/bin"* * /bin/sh ../libtool --mode=install /usr/bin/install -c 'stunnel' '/usr/local/bin/stunnel'* */usr/bin/install -c stunnel /usr/local/bin/stunnel* *test -z "/usr/local/bin" || ../auto/install-sh -c -d "/usr/local/bin"* * /usr/bin/install -c 'stunnel3' '/usr/local/bin/stunnel3'* *test -z "/usr/local/lib/stunnel" || ../auto/install-sh -c -d "/usr/local/lib/stunnel"* * /bin/sh ../libtool --mode=install /usr/bin/install -c 'libstunnel.la' '/usr/local/lib/stunnel/libstunnel.la'* */usr/bin/install -c .libs/libstunnel.dylib /usr/local/lib/stunnel/libstunnel.dylib* */usr/bin/install -c .libs/libstunnel.lai /usr/local/lib/stunnel/ libstunnel.la* *----------------------------------------------------------------------* *Libraries have been installed in:* * /usr/local/lib/stunnel* * * *If you ever happen to want to link against installed libraries* *in a given directory, LIBDIR, you must either use libtool, and* *specify the full pathname of the library, or use the `-LLIBDIR'* *flag during linking and do at least one of the following:* * - add LIBDIR to the `DYLD_LIBRARY_PATH' environment variable* * during execution* * * *See any operating system documentation about shared libraries for* *more information, such as the ld(1) and ld.so(8) manual pages.* *----------------------------------------------------------------------* *make[2]: Nothing to be done for `install-data-am'.* *Making install in doc* *make[2]: Nothing to be done for `install-exec-am'.* *test -z "/usr/local/share/doc/stunnel" || ../auto/install-sh -c -d "/usr/local/share/doc/stunnel"* * /usr/bin/install -c -m 644 'stunnel.html' '/usr/local/share/doc/stunnel/stunnel.html'* * /usr/bin/install -c -m 644 'stunnel.pl.html' '/usr/local/share/doc/stunnel/stunnel.pl.html'* * /usr/bin/install -c -m 644 'stunnel.fr.html' '/usr/local/share/doc/stunnel/stunnel.fr.html'* *test -z "/usr/local/share/man/man8" || ../auto/install-sh -c -d "/usr/local/share/man/man8"* *mkdir: /usr/local/share/man/man8: Permission denied* *make[2]: *** [install-man8] Error 1* *make[1]: *** [install-am] Error 2* and when I check the stunnel version it still uses the old ssl version. Am I doing something wrong here? -- Thanks, Bhavna Quantitative Brokers 646 293 1808 DISCLAIMER: This e-mail and any attachments are for the confidential use of the intended recipient. If you are not the intended recipient of this message you are hereby notified that any review, dissemination, distribution or copying of this message is strictly prohibited. This communication is for information purposes only and should not be regarded as an offer to sell or as a solicitation of an offer to buy any investment product, an official confirmation of any transaction or an official statement of Quantitative Brokers, LLC. E-mail transmissions cannot be guaranteed to be secure or error-free. Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such. All information is subject to change without notice. Quantitative Brokers may, at its discretion, monitor and review the content of all e-mail communications.

1 0

Re: [stunnel-users] telnetd and tcp_wrappers
by Spence, Thomas Civ 844 CS/SCOX 06 Jul '10

06 Jul '10

2 guys did help me and still no luck... Anyone who tried this: [tssl] accept = 992 exec = /usr/sbin/telnetd Let me know... Reason why I am asking you because when I log off the server then stunnel's process stopped running but I want it keep running after logoff. Before I changed 'exec = /usr/sbin/telnetd', it was 'connect = 23' and the stunnel's process ran great and never stop running... Strange. I really need your help. Thanks. --------------- Tom Spence ABIDES SYSTEM SUPPORT 844th CS/SCOX

1 0

Re: [stunnel-users] telnetd and tcp_wrappers
by Spence, Thomas Civ 844 CS/SCOX 02 Jul '10

02 Jul '10

Hi Again, I tried: [tssl] accept = 992 exec = /usr/sbin/telnetd It works. When I log into the server with no problem. When I am ready to log off then the process stopped running??? How can it stays running in process (/usr/local/bin/stunnel)? Thanks. Tom -----Original Message----- From: Spence, Thomas Civ 844 CS/SCOX Sent: Thursday, July 01, 2010 11:53 AM To: 'stunnel-users(a)mirt.net' Subject: telnetd and tcp_wrappers Hi all.. They requested us to turn off the telnetd from inetd.conf and not allowing to use tcp_wrappers... We are still using stunnel 4.33... We can't connect our server from PC with PowerTerm WebConnect because telnetd is off. Is there any way for all users to connect the server by using PowerTerm WebConnect? stunnel.conf: [tssl] accept = 992 connect = 23 (can't use telnet port) I know I can't use "connect = 22" because it doesn't work. Any idea? I really need your help... --------------- Tom Spence

2 1

telnetd and tcp_wrappers
by Spence, Thomas Civ 844 CS/SCOX 01 Jul '10

01 Jul '10

Hi all.. They requested us to turn off the telnetd from inetd.conf and not allowing to use tcp_wrappers... We are still using stunnel 4.33... We can't connect our server from PC with PowerTerm WebConnect because telnetd is off. Is there any way for all users to connect the server by using PowerTerm WebConnect? stunnel.conf: [tssl] accept = 992 connect = 23 (can't use telnet port) I know I can't use "connect = 22" because it doesn't work. Any idea? I really need your help... --------------- Tom Spence

1 0

Re: [stunnel-users] Connecting to stunnel with SQLServer
by Mohit Anchlia 30 Jun '10

30 Jun '10

Has anyone else tried using Java SSL or anything using Java that will not require stunnel on the client side? On Fri, Jun 25, 2010 at 12:13 PM, Carter Browne <cbrowne(a)cbcs-usa.com> wrote: > On 6/24/2010 11:00 PM, Mohit Anchlia wrote: >> On Thu, Jun 24, 2010 at 10:27 AM, Carter Browne <cbrowne(a)cbcs-usa.com> wrote: >> >>> On 6/24/2010 12:09 PM, Mohit Anchlia wrote: >>> >>>> On Thu, Jun 24, 2010 at 5:14 AM, Carter Browne <cbrowne(a)cbcs-usa.com> wrote: >>>> >>>> >>>>> It is very easy to do if you have stunnel running on both ends. On the >>>>> client side in the configuration file you could have: >>>>> >>>>> [MSSQL-OUT] >>>>> accept = localhost:1433 >>>>> connect = remote:20000 >>>>> client = yes >>>>> >>>>> >>>> Thanks. So if I have stunnel running on both ends how do I connect to >>>> SQL server? Just open a JDBC connection on the local port and it will >>>> automatically connect on the remote side? >>>> >>>> >>> In this example, I would define an alias using the configuration manager >>> giving it your name for the data base, and having it connect to port >>> 1433 on localhost. For my systems, >>> I usually use a dummy name defined in the 127.0.0.0/8 net and some port >>> other than 1433. This approach does require stunnel on both ends. I >>> haven't tried any other approaches. >>> MS SQL server does have some options for encrypting the traffic as well >>> - I did not think they would work for my mixed Linux/Windows >>> environment, but it might work for your environment. >>> >>> >>> >>>> Also, are there any other options? We have 20 servers from which we >>>> need to connect. I was trying to avoid install of another binary and >>>> relying on it for being up and running. Is it possible to use Java >>>> SSL? Or is that too complicated and not proven to work? Not sure if >>>> there is any other option. >>>> >>>> >>>> >>>>> on the remote side have: >>>>> >>>>> [MSSQL-IN] >>>>> accept = 20000 >>>>> connect = 1433 >>>>> client = no >>>>> >>>>> In this example port 20000 would have to be open to any firewalls >>>>> including the Windows firewall and assumes you are using the standard >>>>> MSSQL port on the server. >>>>> >>>>> You would probably want to use the SQL Server Configuration Manager on >>>>> the client computer to add an alias for your data base. >>>>> >>>>> >> Our client will be on Linux box. I am trying to understand if I am >> using JDBC the connection URL is something like: >> >> jdbc:sqlserver://[serverName[\instanceName][:portNumber]][;property=value[;property=value]] >> >> So if I use stunnel on both sides then how will this work? What will I >> give in my connection string? >> > > I don't have a Java DB connection, so I cannot speak from experience. > For both the Windows and the Linux ODBC drivers, using the example above > the server name would be > localhost:1433. The Instance name and any properties that you send > would not change. Again, using the values in the example, stunnel is > simply mapping localhost:1433 to remote:1433. > > Carter >> >>>>> Carter >>>>> >>>>> Carter Browne >>>>> CBCS >>>>> cbrowne(a)cbcs-usa.com >>>>> 781-721-2890 >>>>> >>>>> >>>>> On 6/23/2010 11:32 PM, Mohit Anchlia wrote: >>>>> >>>>> >>>>>> We have a requirement to connect to a SQLServer that is connected >>>>>> through stunnel on the other end. Can I use java SSL to talk to >>>>>> stunnel? What are my options? >>>>>> _______________________________________________ >>>>>> stunnel-users mailing list >>>>>> stunnel-users(a)mirt.net >>>>>> http://stunnel.mirt.net/mailman/listinfo/stunnel-users >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>> >>> >> >

1 1

stunnel question and behaviour
by eni-urgence 25 Jun '10

25 Jun '10

Hello all. I want to use stunnel as ssl terminatation for https and pass httpd request to haproxy. I have compiled stunnel (source http://www.stunnel.org/download/stunnel/src/stunnel-4.32.tar.gz ) and apply this patch http://haproxy.1wt.eu/download/patches/stunnel-4.32-xforwarded-for.diff. I have placed the binary in /usr/local/bin . I want to use the heartbeat capabilities and start stunnel only if VIP is on the node. In order to make that, the init script of stunnel must be LSB compatible like said http://www.linux-ha.org/LSBResourceAgent. When i made a /etc/init.d/stunnel stop then a /etc/init.d/stunnel start, the service wont start . in order to reproduce make a //etc/init.d/stunnel start/ /ps -ef/ said stunnel 30301 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30302 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30303 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30304 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30305 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30306 1 0 13:21 ? 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf Is it normal there is many process of stunnel ? And only the last pid process with ? in place of pts/2 is on the pid file. //etc/init.d/stunnel stop/ /ps -ef /said /stunnel 30306 1 0 13:21 ? 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf/ /and / //etc/init.d/stunnel start/ / DÃ©marrage de stunnel :Reading configuration from file /etc/stunnel/stunnel.conf FIPS mode disabled RAND_status claims sufficient entropy for the PRNG PRNG seeded successfully Certificate: /path_to_mycrt Certificate loaded Key file: /path_to_my_key Private key loaded SSL context initialized for servicemy_domaine_name Configuration successful No limit detected for the number of clients FD=9 in non-blocking mode FD=10 in non-blocking mode FD=11 in non-blocking mode Option SO_REUSEADDR set on accept socket Error binding secure.scan-prod.com to 192.168.100.156:443 bind: Address already in use (98)/ return code 1 after stop there is a remaining stunnel process. It appears that this process is the one which the pid had been added to pidfile a /file /usr/local/bin/stunnel /said //usr/local/bin/stunnel: ELF 64-bit LSB executable, AMD x86-64, version 1 (SYSV), for GNU/Linux 2.6.9, dynamically linked (uses shared libs), for GNU/Linux 2.6.9, stripped/ /usr/local/bin/stunnel -version said /stunnel 4.32 on x86_64-unknown-linux-gnu with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008/ /Threading:PTHREAD SSL:ENGINE,FIPS Sockets:POLL,IPv6 Auth:LIBWRAP/ /Global options/ /debug = daemon.notice/ /pid = /usr/local/var/run/stunnel/stunnel.pid/ /RNDbytes = 64/ /RNDfile = /dev/urandom/ /RNDoverwrite = yes/ /Service-level options/ /cert = /usr/local/etc/stunnel/stunnel.pem/ /ciphers = FIPS/ /session = 300 seconds/ /stack = 65536 bytes/ /sslVersion = TLSv1/ /TIMEOUTbusy = 300 seconds/ /TIMEOUTclose = 60 seconds/ /TIMEOUTconnect = 10 seconds/ /TIMEOUTidle = 43200 seconds/ /verify = none/ my stunnel.conf is like that /; Protocol version (all, SSLv2, SSLv3, TLSv1)/ /sslVersion = all/ /setuid = stunnel/ /setgid = stunnel/ /chroot = /var/chroot/stunnel/ /pid = /var/run/stunnel.pid/ /output = /var/log/stunnel.log/ /debug = 5/ /fips = no/ /socket=l:TCP_NODELAY=1/ /socket=r:TCP_NODELAY=1/ /[my_domain]/ /key = /path_to_my_key/ /cert = /path_to_mycrt/ /accept = 192.168.100.156:443/ /connect = 192.168.100.156:10443/ /xforwardedfor = yes/ /TIMEOUTclose = 0 Thanks for your help /

1 0

stunnel and heartbeat
by eni-urgence 25 Jun '10

25 Jun '10

Hello all. I want to use stunnel as ssl terminatation for https and pass httpd request to haproxy. I have compiled stunnel (source http://www.stunnel.org/download/stunnel/src/stunnel-4.32.tar.gz ) and apply this patch http://haproxy.1wt.eu/download/patches/stunnel-4.32-xforwarded-for.diff. I have placed the binary in /usr/local/bin . I want to use the heartbeat capabilities and start stunnel only if VIP is on the node. In order to make that, the init script of stunnel must be LSB compatible like said http://www.linux-ha.org/LSBResourceAgent. When i made a /etc/init.d/stunnel stop then a /etc/init.d/stunnel start, the service wont start . in order to reproduce make a //etc/init.d/stunnel start/ /ps -ef/ said stunnel 30301 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30302 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30303 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30304 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30305 1 0 13:21 pts/2 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf stunnel 30306 1 0 13:21 ? 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf Is it normal there is many process of stunnel ? And only the last pid process with ? in place of pts/2 is on the pid file. //etc/init.d/stunnel stop/ /ps -ef /said /stunnel 30306 1 0 13:21 ? 00:00:00 /usr/local/bin/stunnel /etc/stunnel/stunnel.conf/ /and / //etc/init.d/stunnel start/ / DÃ©marrage de stunnel :Reading configuration from file /etc/stunnel/stunnel.conf FIPS mode disabled RAND_status claims sufficient entropy for the PRNG PRNG seeded successfully Certificate: /path_to_mycrt Certificate loaded Key file: /path_to_my_key Private key loaded SSL context initialized for servicemy_domaine_name Configuration successful No limit detected for the number of clients FD=9 in non-blocking mode FD=10 in non-blocking mode FD=11 in non-blocking mode Option SO_REUSEADDR set on accept socket Error binding secure.scan-prod.com to 192.168.100.156:443 bind: Address already in use (98)/ return code 1 after stop there is a remaining stunnel process. It appears that this process is the one which the pid had been added to pidfile a /file /usr/local/bin/stunnel /said //usr/local/bin/stunnel: ELF 64-bit LSB executable, AMD x86-64, version 1 (SYSV), for GNU/Linux 2.6.9, dynamically linked (uses shared libs), for GNU/Linux 2.6.9, stripped/ /usr/local/bin/stunnel -version said /stunnel 4.32 on x86_64-unknown-linux-gnu with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008/ /Threading:PTHREAD SSL:ENGINE,FIPS Sockets:POLL,IPv6 Auth:LIBWRAP/ /Global options/ /debug = daemon.notice/ /pid = /usr/local/var/run/stunnel/stunnel.pid/ /RNDbytes = 64/ /RNDfile = /dev/urandom/ /RNDoverwrite = yes/ /Service-level options/ /cert = /usr/local/etc/stunnel/stunnel.pem/ /ciphers = FIPS/ /session = 300 seconds/ /stack = 65536 bytes/ /sslVersion = TLSv1/ /TIMEOUTbusy = 300 seconds/ /TIMEOUTclose = 60 seconds/ /TIMEOUTconnect = 10 seconds/ /TIMEOUTidle = 43200 seconds/ /verify = none/ my stunnel.conf is like that /; Protocol version (all, SSLv2, SSLv3, TLSv1)/ /sslVersion = all/ /setuid = stunnel/ /setgid = stunnel/ /chroot = /var/chroot/stunnel/ /pid = /var/run/stunnel.pid/ /output = /var/log/stunnel.log/ /debug = 5/ /fips = no/ /socket=l:TCP_NODELAY=1/ /socket=r:TCP_NODELAY=1/ /[my_domain]/ /key = /path_to_my_key/ /cert = /path_to_mycrt/ /accept = 192.168.100.156:443/ /connect = 192.168.100.156:10443/ /xforwardedfor = yes/ /TIMEOUTclose = 0 Thanks for your help /

1 0

error during multithreaded operation
by Bhavna Jhunjhunwala 24 Jun '10

24 Jun '10

Hi Users, I am having the same problem as listed in below thread. Is there a resolution? Appreciate any help in this matter! http://stunnel.mirt.net/pipermail/stunnel-users/2009-April/002353.html open ssl version: OpenSSL 0.9.8k 25 Mar 2009 stunnel version: stunnel -version stunnel 4.33 on i386-apple-darwin10.2.0 with OpenSSL 0.9.8k 25 Mar 2009 Threading:PTHREAD SSL:ENGINE Sockets:SELECT,IPv6 Auth:LIBWRAP Global options debug = daemon.notice pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = ALL:!aNULL:!eNULL:!SSLv2 session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none -- Thanks, Bhavna Quantitative Brokers DISCLAIMER: This e-mail and any attachments are for the confidential use of the intended recipient. If you are not the intended recipient of this message you are hereby notified that any review, dissemination, distribution or copying of this message is strictly prohibited. This communication is for information purposes only and should not be regarded as an offer to sell or as a solicitation of an offer to buy any investment product, an official confirmation of any transaction or an official statement of Quantitative Brokers, LLC. E-mail transmissions cannot be guaranteed to be secure or error-free. Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such. All information is subject to change without notice. Quantitative Brokers may, at its discretion, monitor and review the content of all e-mail communications.

1 0

Connecting to stunnel with SQLServer
by Mohit Anchlia 24 Jun '10

24 Jun '10

We have a requirement to connect to a SQLServer that is connected through stunnel on the other end. Can I use java SSL to talk to stunnel? What are my options?

1 0

transfer() loop executes not transferring any data
by Nelson 22 Jun '10

22 Jun '10

I just setup stunnel to partner with haproxy to handle https. My concern is I saw the logs below on my stunnel logs. I don't know if I need to worry about this since my testing using https is doing fine. stunnel is forwarding https request to haproxy. 2010.06.22 07:57:27 LOG3[1363:2083728]: transfer() loop executes not transferring any data 2010.06.22 07:57:27 LOG3[1363:2083728]: please report the problem to Michal.Trojnara(a)mirt.net 2010.06.22 07:57:27 LOG3[1363:2083728]: protocol=TLSv1, check_SSL_pending=no 2010.06.22 07:57:27 LOG3[1363:2083728]: socket open: rd=yes wr=no, ssl open: rd=no wr=yes 2010.06.22 07:57:27 LOG3[1363:2083728]: socket ready: rd=no wr=no, ssl ready: rd=yes wr=no 2010.06.22 07:57:27 LOG3[1363:2083728]: wants: SSL_read rd=no wr=no, SSL_write rd=no wr=yes, SSL_shutdown rd=no wr=no 2010.06.22 07:57:27 LOG3[1363:2083728]: socket input buffer: 16384 byte(s), ssl input buffer: 0 byte(s) Thanks, Nelson

1 0

"choose a digital certificate" pop-up in IE
by KumpelJ 21 Jun '10

21 Jun '10

Hello I have browsed the archives but have not found the answer to this question... I have stunnel set up to handle https connections. It sits on a Debian server alongside HAProxy and works fine with every browser except for Internet Explorer. When I connect with Internet Explorer, I get a blank "Please choose a digital certificate" pop-up. How do we turn off the request for the client certificate in IE? Here are my details....thanks in advance. #vi /etc/stunnel/stunnel.conf verify=0 CAfile=/etc/ssl/certs/chain.pem cert=/etc/ssl/certs/multidomain.pem CApath=/etc/ssl/certs/ pid = /etc/stunnel/stunnel.pid debug = 3 output = /etc/stunnel/stunnel.log socket=l:TCP_NODELAY=1 socket=r:TCP_NODELAY=1 client=no [https] accept=192.168.11.32:443 connect=localhost:444 TIMEOUTclose=0 xforwardedfor=yes #usr/local/bin/stunnel -version stunnel 4.32 on x86_64-unknown-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Global options debug = daemon.notice pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none -- View this message in context: http://old.nabble.com/%22choose-a-digital-certificate%22-pop-up-in-IE-tp286… Sent from the Stunnel - Users mailing list archive at Nabble.com.

4 8

stunnel dies on logoff
by Bhavna Jhunjhunwala 17 Jun '10

17 Jun '10

Hi, I am using quickfix application to connect to an exchange and receive market data. The connectivity to exchange is through SSL and am using stunnel 4.15. I see that stunnel dies, every time my quickfix application is restarted or sends a logout to server. Please let me know if a solution is in place. *Below is the stunnel.conf file:* cert = /home/bhavna/workspace/stunnel/str10100str.pem key = /home/bhavna/workspace/stunnel/str10100str.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = /home/bhavna/workspace/stunnel/stunnel.log pid = /home/bhavna/workspace/stunnel/stunnel.pid ; Use it for client mode client = yes ; Service-level configuration [currenex_stream] ;accept = 127.0.0.1:1109 accept = 1110 ;prod details connect = server_IP:port TIMEOUTclose = 10 *Below are the version details of stunnel:* > ./stunnel -version stunnel 4.15 on x86_64-redhat-linux-gnu with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = /etc/stunnel/stunnel.pem session = 300 seconds TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none *Logs:* 2010.06.16 18:59:23 LOG7[6401:1084586304]: SSL alert (read): warning: close notify 2010.06.16 18:59:23 LOG7[6401:1084586304]: SSL closed on SSL_read 2010.06.16 18:59:23 LOG7[6401:1084586304]: Socket write shutdown 2010.06.16 18:59:23 LOG7[6401:1084586304]: SSL write shutdown 2010.06.16 18:59:23 LOG7[6401:1084586304]: SSL alert (write): warning: close notify 2010.06.16 18:59:23 LOG6[6401:1084586304]: SSL_shutdown successfully sent close_notify 2010.06.16 18:59:23 LOG5[6401:1084586304]: Connection closed: 109 bytes sent to SSL, 129 bytes sent to socket 2010.06.16 18:59:23 LOG7[6401:1084586304]: currenex_stream finished (0 left) -- Thanks, Bhavna DISCLAIMER: This e-mail and any attachments are for the confidential use of the intended recipient. If you are not the intended recipient of this message you are hereby notified that any review, dissemination, distribution or copying of this message is strictly prohibited. This communication is for information purposes only and should not be regarded as an offer to sell or as a solicitation of an offer to buy any investment product, an official confirmation of any transaction or an official statement of Quantitative Brokers, LLC. E-mail transmissions cannot be guaranteed to be secure or error-free. Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such. All information is subject to change without notice. Quantitative Brokers may, at its discretion, monitor and review the content of all e-mail communications.

1 1

Re: [stunnel-users] Stunnel supports ECC certificate?
by Bao, Robert 08 Jun '10

08 Jun '10

To those who may find it useful: Mike came to rescure. He provided some new code and gave me the modified file to try out. It worked very well so far, problem solved. He plans to release the change in the next revision. Thanks a lot Mike. Robert Bao > _____________________________________________ > From: Bao, Robert > Sent: Thursday, June 03, 2010 2:14 PM > To: 'stunnel-users(a)mirt.net' > Subject: Stunnel supports ECC certificate? > > I searched the entire archive, couldn't find the answer/solution I am > looking for. I have to post to this group, and appreciate any > help/suggestion from any you. > > I use the latest 1.0.0 OpenSSL and 4.33 Stunnel. > > I used OpenSSL commands that very similar to what is described in the > following link to create the ECC certificate and the private key file. > http://src.opensolaris.org/source/xref/sfw/usr/src/lib/openssl/openssl > -0.9.8n/demos/ssltest-ecc/ECC-RSAcertgen.sh > > Start Stunnel, see the following errors: > Key file: (actual path to the private key file)\HOST.KEY > error stack: 140B3009 : error:140B3009:SSL > routines:SSL_CTX_use_RSAPrivateKey_file:PEM lib > SSL_CTX_use_RSAPrivateKey_file: 607907F: error:0607907F:digital > envelope routines:EVP_PKEY_get1_RSA:expecting an rsa key > > There was a similar posting 4-5 years ago, and Mike answered it (the > answer was: Stunnel didn't support ECC at that time). > http://stunnel.mirt.net/pipermail/stunnel-users/2005-October/000817.ht > ml > > Seems like this is still true today. Then, when the ECC support will > be added to Stunnel? > > If Stunnel already supports ECC certificate, how do I make it work? > > Thanks. > > Robert Bao > Software House > Tyco International > 978-577-4202 > > Explore our new Tyco Online Learning Center Web-based Training Bundles > at: www.swhouse.com/support/tyco_online_learning_center.aspx > > This e-mail may contain or have attached to it information or > technology the export or re-export of which is restricted by U.S. laws > and regulations. By viewing this e-mail and any attachments, the > recipient agrees to the following: (i) the recipient's use of the > contents of this e-mail and any attachments shall comply with all > applicable laws, rules and regulations, including, without limitation, > U.S. international trade laws and regulations, and (ii) the recipient > may not transfer or otherwise export or re-export any information or > technology contained in this e-mail or any attachment except in full > compliance with the export controls administered by the U.S. and other > countries and any applicable import and use restrictions. >

1 0

STunnel client on Android?
by Marcel Bokhorst 08 Jun '10

08 Jun '10

Hi, Is it possible to use STunnel as client on Android? Regards, Marcel

2 1

stunnel 4.33 stops (crashes?) after undetermined running time
by Markus Borst 07 Jun '10

07 Jun '10

Hi, I have a strange problem with current stunnel (4.33): It just crashes after some time. The time is variable, I suspect it stops after a number of connections. System: - Windows Server 2003 SP2 (also happens on Windows Server 2008R2) - stunnel runs as service - stunnel is configured to run as ssl server for imap and pop3 with our certificate (including key-chain) stunnel was running fine for years on the Windows Server 2003. After upgrade to stunnel 4.33, the stunnel service process first worked fine, the just stopped working after some time: - The windows service "stunnel" was stopped - the stunnel.log (standard debug level) showed not error or other entry at the time of the stop. - The windows eventlog shows: ====== Event 7034, Service Control Manager The stunnel service terminated unexpectedly. It has done this 1 time(s). ====== (I'm not 100% sure, whether this event log message corresponds to the stunnel crash I described or to another crash.) I have downgrade to version 4.32, the stunnel service now runs uninterrupted as before. Since the time of crash varies somewhat, seemingly with the current load of the server, I suspect that stunnel crashes after a certain amount of ssl connections, but I'm not sure. This has happened on two different servers (Windows Server 2003 SP2 and Windows Server 2008 R2). Is this a known problem? I'd love to do some further tests, but since this is a production system, I cannot test it in our normal environment. A program to generate random ssl connections would come handy to further analyze the problem. Greetings Markus Borst -- TU Darmstadt Hochschulrechenzentrum (HRZ) Markus Borst Adresse: Petersentrasse 30, 64287 Darmstadt, Germany Tel.: 06151/16-2056 Email: M.Borst(a)hrz.tu-darmstadt.de

2 2

Three patches: DNS CommonName verification support, separated stderr/foreground options, and support for minimal ssl libs
by Tristan Schmelcher 07 Jun '10

07 Jun '10

Hello, Recently I started using stunnel in an embedded Linux product and I had need to add several features that I think other users would benefit from. I have attached them as separate patches against 4.33. I hereby release them into the public domain. Here is a description of each: stunnel-4.33-handle-minimal-ssl-libs.patch: Add support for building against a libssl/libcrypo that has had various non-essential features removed via the "no-<feature>" Configure options for openssl. This requires disabling non-essential Stunnel features at compile-time if they have dependencies on disabled libssl/libcrypto features. For memory-constrained embedded systems, this is a big win. With this patch I was able to cut the memory footprint of stunnel+openssl by about a third simply by disabling openssl features that I didn't need. stunnel-4.33-separate-stderr-option.patch This splits the stderr logging effect of the "foreground" option into a separate option named "stderr", so that users have the freedom to enable foreground without stderr logging, or vice versa. For backwards compatibility though, specifying foreground = yes implies stderr = yes unless followed in the config by stderr = no. This is useful on embedded Linux systems that lack an implementation of fork() (due to the processor not having an MMU), because on such systems every daemon has to be launched in a foreground mode and pre-daemonized with the simpler vfork() function, e.g. using "&" from a shell. In this mode, logging to stderr does not make sense, because in reality the process is still a daemon so the logging clutters the terminal. stunnel-4.33-dns-commonname-verify-support.patch: I saved the best for last. ;) This adds a "verify_dns" option to check the CommonName in peer certificates against their DNS name when verifying, much as web browsers do. I have seen posts from users asking for this feature in the past, so I think it's value is self-evident. I'd also like to take this opportunity to say that I'm a long-time user of Stunnel on my personal Linux desktop machine and it is a really excellent piece of software. Thank you for making it free and open source.

3 8

Stunnel supports ECC certificate?
by Bao, Robert 03 Jun '10

03 Jun '10

I searched the entire archive, couldn't find the answer/solution I am looking for. I have to post to this group, and appreciate any help/suggestion from any you. I use the latest 1.0.0 OpenSSL and 4.33 Stunnel. I used OpenSSL commands that very similar to what is described in the following link to create the ECC certificate and the private key file. http://src.opensolaris.org/source/xref/sfw/usr/src/lib/openssl/openssl-0 .9.8n/demos/ssltest-ecc/ECC-RSAcertgen.sh Start Stunnel, see the following errors: Key file: (actual path to the private key file)\HOST.KEY error stack: 140B3009 : error:140B3009:SSL routines:SSL_CTX_use_RSAPrivateKey_file:PEM lib SSL_CTX_use_RSAPrivateKey_file: 607907F: error:0607907F:digital envelope routines:EVP_PKEY_get1_RSA:expecting an rsa key There was a similar posting 4-5 years ago, and Mike answered it (the answer was: Stunnel didn't support ECC at that time). http://stunnel.mirt.net/pipermail/stunnel-users/2005-October/000817.html Seems like this is still true today. Then, when the ECC support will be added to Stunnel? If Stunnel already supports ECC certificate, how do I make it work? Thanks. Robert Bao Software House Tyco International 978-577-4202 Explore our new Tyco Online Learning Center Web-based Training Bundles at: www.swhouse.com/support/tyco_online_learning_center.aspx This e-mail may contain or have attached to it information or technology the export or re-export of which is restricted by U.S. laws and regulations. By viewing this e-mail and any attachments, the recipient agrees to the following: (i) the recipient's use of the contents of this e-mail and any attachments shall comply with all applicable laws, rules and regulations, including, without limitation, U.S. international trade laws and regulations, and (ii) the recipient may not transfer or otherwise export or re-export any information or technology contained in this e-mail or any attachment except in full compliance with the export controls administered by the U.S. and other countries and any applicable import and use restrictions.

1 0

deploy stunnel
by Arko-Quick, Patricia K 02 Jun '10

02 Jun '10

Is there a way to deploy stunnel to all users versus the current user logged in? I would like to deploy it with sms to all users of the machine.

1 0

Default for TIMEOUTidle?
by Markus Borst 27 May '10

27 May '10

I want to modify TIMEOUTidle in our configuration. To be sure to set it to sensible values, I need to know the default value, but I can't find it in the docs. Greetings Markus Borst -- TU Darmstadt Hochschulrechenzentrum (HRZ) Markus Borst Adresse: Petersentrasse 30, 64287 Darmstadt, Germany Tel.: 06151/16-2056 Email: M.Borst(a)hrz.tu-darmstadt.de

1 0

Transparent mode, alternative env.c
by Hans Werner Strube 25 May '10

25 May '10

The method for passing the remote address and port to an exec'ed program through getenv() calls in the preloaded libstunnel.so fails for programs that clean the environment initially. This can be circumvented placing getenv() in an _init() function and storing the results in static variables. Here is my alternative env.c (without the copyright and license), which I have been using for more than a year: * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * /* getpeername() can't be declared in the following includes */ #define getpeername no_getpeername #include <sys/types.h> #include <sys/socket.h> /* for AF_INET */ #include <netinet/in.h> #include <arpa/inet.h> /* for inet_addr() */ #include <stdlib.h> /* for getenv() */ #ifdef __BEOS__ #include <be/bone/arpa/inet.h> /* for AF_INET */ #include <be/bone/sys/socket.h> /* for AF_INET */ #else #include <sys/socket.h> /* for AF_INET */ #endif #undef getpeername static uint32_t rem_host=0; static uint16_t rem_port=0; /* Requires shared-library linking by ld, not cc (except with gcc -nostdlib) */ void _init() { char *value; if((value=getenv("REMOTE_HOST")) && *value != '\0') rem_host = inet_addr(value); if((value=getenv("REMOTE_PORT")) && *value != '\0') rem_port = htons(atoi(value)); } int getpeername(int s, struct sockaddr_in *name, int *len) { char *value; name->sin_family = AF_INET; name->sin_addr.s_addr = rem_host; name->sin_port = rem_port; return 0; } /* End of env.c */

1 0

STRLEN in common.h may be too small
by Hans Werner Strube 25 May '10

25 May '10

In common.h of stunnel-4.x, the parameter STRLEN (used for many buffers) is set to 256. This is insufficient in some cases, e.g., the CAPABILITY response of an IMAP server or the pathname of a file may be too long, resulting in errors. If you encounter such cases (e.g., messages "Input line too long"), increase STRLEN, e.g., to 512.

1 0

Using stunnel to RDP into a SSL-enabled Windows box
by Daren Krive 11 May '10

11 May '10

Hi everyone, First of all I apologize if this has been asked before or if I am totally misunderstanding the purpose of stunnel altogether. If so please bear with my ignorance. I am an IT consultant and I manage about 20+ Windows-based servers. Some of these servers are accessible via VPN while others are accessible directly via RDP over the Internet. For those that are exposed to the net I am using the SSL certificate feature of Remote Desktop by going into “Terminal Services Configuration” and configuring the connection to use an SSL (most of the time a self-signed cert). I can connect to these machines no problem from Windows and I get a “lock” icon in my RDP client. However I cannot connect to these machines using rdestkop under Ubuntu. I have determined that if I turn off the requirement to use SSL on the server side (and instead allow the connection to use the built-in encryption of RDP) then I am able to connect with rdesktop. I would very much like to avoid rebooting just to connect to these servers. I am also not willing to remove the requirement for the SSL connection. Is there a way I can use stunnel on my Ubuntu box to first establish a secure SSL connection and then use rdesktop over that connection? I have searched high and low for info on this and found nothing. I have found instructions on how to use the Windows version of stunnel to secure RDP but that isn’t what I am trying to do. The server is already using an SSL cert to encrypt the connection (not sure how many people know Windows 2003 and up can do this). I am looking to get around the apparent lack of SSL support in rdesktop. Best regards, Daren.

3 3

running as a windows service
by Graham Chiu 10 May '10

10 May '10

I downloaded and ran the windows binary 4.33. When I use the stunnel.pem it runs fine as a service. I created my own pem ( using Openssl on OpenSolaris ) and it won't run now as a service. I get a timeout message. If I then uninstall it as a service, and run it as an application, it works. Ideas on getting to run as a service with my pem? The log says nothing of note. -- Graham Chiu

2 1

Safari SSL Problems
by Rene Plattner 05 May '10

05 May '10

Hi, has anyone Problems with Safari? I habe Problems with Safari 3 + 4 on Windows with stunnel Version 4.27 + 4.33 Everytime if I want to connect to an SSL terminated (stunnel) webservice, Safari asks for an client certificate, allthough I set the option verify to default (=none). Kind regards, René Plattner -- -------------------------------------------------------------- Dipl.-Ing. René Plattner Zentraler Informatikdienst (Central IT-Services) Universität Innsbruck Technikerstrasse 23 Tel: ++43512/507-2360 6020 Innsbruck Fax: ++43512/507-2944 Austria E-Mail: rene.plattner(a)uibk.ac.at Homepage: http://www.uibk.ac.at/zid -------------------------------------------------------------- D92E 1AE3 A8AA 9A57 8E5B 9204 F5D0 95DB 4030 742D http://homepage.uibk.ac.at/~c1021058/keys/0x4030742D.pub --------------------------------------------------------------

1 0

zlib error in build for W32
by J F 04 May '10

04 May '10

Hi, I'm trying to build from source stunnel-4.33 for W32 in a machine with Debian lenny following the guidelines provided in INSTALL.W32. First I received complains from the compiler about zlib.h not found. Then I copied the zlib headers from /usr/include in include directory under openssl tree. Now openssl 1.0 compiles smoothly but when I try to compile stunnel I received the following error: i586-mingw32msvc-gcc -s -o stunnel.exe file.obj client.obj log.obj options.obj protocol.obj network.obj resolver.obj ssl.obj ctx.obj verify.obj sthreads.obj stunnel.obj gui.obj resources.obj -L/usr/src/openssl-1.0.0 -lzdll -lcrypto.dll -lssl.dll -lws2_32 -lgdi32 -mwindows /usr/lib/gcc/i586-mingw32msvc/4.2.1-sjlj/../../../../i586-mingw32msvc/bin/ld: cannot find -lzdll collect2: ld returned 1 exit status make: *** [stunnel.exe] Error 1 Am I doing some basic mistake? JF

2 1

How to start windows service with realtime priority?
by Ryan Dunn 20 Apr '10

20 Apr '10

I've been trying to figure out how to start the stunnel service on windows with a realtime priority, and so far, all attempts have failed. I've tried setting the ImagePath to 'start /realtime "C:\Program Files\stunnel\stunnel.exe" -service -install' and inserting that into a bat file and calling that instead, but that didn't work either. Does anyone know how to specify the startup priority of a windows service? Is that something that the program would need to support? Thanks, Ryan

1 0

newb: setting up and debugging a windows stunnel
by Jay Sprenkle 19 Apr '10

19 Apr '10

Good afternoon, I'm trying to use stunnel to secure a legacy application's communications. I can't seem to get it setup and working. Can anyone provide any hints where I'm going wrong? Here's what I'm trying to accomplish: A windows service on a client machine connects to a server on port 7000 using TCP. I'd like to encrypt the communication between client and server. Here's what I've tried: Created a new server that accepts ssl connections on port 7443. Got a certificate for the server and installed it. Installed stunnel on my windows machine (version 7.43 from the distribution archive file). Installed libssl32.dll and libeay32.dll in the same directory as stunnel.exe ( from the openssl-0.9.8h-1 binary distribution). Installed it as a service using "stunnel -install" Configured stunnel as follows: debug=7 output=C:\p4\internal\Utility\Proxy\proxy.log service=Proxy taskbar=no [exchange] accept=7000 client=yes connect=proxy.blah.com:7443 I changed my hosts file to trick the old application: server.blah.com 127.0.0.1 proxy.blah.com IP-address-of-server.blah.com "server.blah.com" now resolves to the machine it's running on (i.e. stunnel). "proxy.blah.com" goes to the real server. stunnel should connect to the server. I start the stunnel service and try to connect. It looks like it's working but the stunnel service just shuts down with no message. 2010.04.19 13:16:21 LOG5[4924:3716]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:16:21 LOG5[4924:3716]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange accepted connection from 127.0.0.1:4134 2010.04.19 13:16:49 LOG6[4924:3748]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange connected remote server from x.253.120.19:4135 2010.04.19 13:20:24 LOG5[3668:3856]: Reading configuration from file stunnel.conf 2010.04.19 13:20:24 LOG7[3668:3856]: Snagged 64 random bytes from C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: Wrote 1024 new random bytes to C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: RAND_status claims sufficient entropy for the PRNG 2010.04.19 13:20:24 LOG7[3668:3856]: PRNG seeded successfully 2010.04.19 13:20:24 LOG7[3668:3856]: SSL context initialized for service exchange 2010.04.19 13:20:24 LOG5[3668:3856]: Configuration successful 2010.04.19 13:20:24 LOG5[3668:3856]: No limit detected for the number of clients 2010.04.19 13:20:24 LOG7[3668:3856]: FD=312 in non-blocking mode 2010.04.19 13:20:24 LOG7[3668:3856]: Option SO_REUSEADDR set on accept socket 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange bound to 0.0.0.0:7000 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange opened FD=312 2010.04.19 13:20:24 LOG5[3668:3856]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:20:24 LOG5[3668:3856]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:21:02 LOG7[3668:4556]: Service exchange accepted FD=372 from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:4556]: Creating a new thread 2010.04.19 13:21:02 LOG7[3668:4556]: New thread created 2010.04.19 13:21:02 LOG7[3668:3756]: Service exchange started 2010.04.19 13:21:02 LOG7[3668:3756]: FD=372 in non-blocking mode 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange accepted connection from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:3756]: FD=396 in non-blocking mode 2010.04.19 13:21:02 LOG6[3668:3756]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:21:02 LOG7[3668:3756]: connect_blocking: s_poll_wait x.80.60.32:7443: waiting 10 seconds 2010.04.19 13:21:02 LOG5[3668:3756]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange connected remote server from x.253.120.19:4157 2010.04.19 13:21:02 LOG7[3668:3756]: Remote FD=396 initialized 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): before/connect initialization 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server certificate A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server done A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client key exchange A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write change cipher spec A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write finished A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 flush data 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read finished A The client thinks the connection is closed: No connection could be made because the target machine actively refused it 127.0.0.1:7000 at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.Sockets.Socket.Connect(EndPoint remoteEP) at Service.ConnUtility.Connect() Any suggestions? Thanks

1 0

Stunnel connection from A to B but direction from B to A?
by Carsten Krüger 13 Apr '10

13 Apr '10

Hi, is it possible with stunnel to connect from host A to host B but to have the port redirection the other way? host A has a webserver on 127.0.0.1:80 host A connects to Host B (example.dyndns.org:8000) Host B opens a browser on page http://127.0.0.1:80 and reaches the webserver on A If yes, how do I have to configure A and B? The manpage didn't enlighten me. The normal way A connects to B and A reaches webserver on B works perfectly. greetings Carsten

2 1

multiple systems
by tony westenhofer 12 Apr '10

12 Apr '10

Hello, My currently working setup is using verify=2 (at client only )and the server1's info is in my .pem on the clients. This works fine, but if need to have server2 act as backup when server1 is down. Can I just add server2's info to the .pem or do I need to setup multiple files for the different keys? Thanks in advance for saving me some lab time! Noob _________________________________________________________________ The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with Hotmail. http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID2…

1 0

"bind: Address already in use (48)"
by Dino Buzzetti 12 Apr '10

12 Apr '10

Please pardon me if this is an improper question to the list. But I am a freshman who uses stunnel to connect to his university library proxy from abroad. I had stunnel installed and it worked properly, but after an upgrade of all old ports, solicited by the installation process of a new application requiring MacPorts, stunnel doesn't work anymore. I have tried to re-install it, but I still get the same error message > Error binding squidssl to ::1:8095 > bind: Address already in use (48) Any clue as to what might have engaged the 8095 address and on how I might try to solve the problem? Best, -dino buzzetti

3 2

Stunnel doesn't work at all since 4.30
by Denis Solovyov 05 Apr '10

05 Apr '10

Dear friends, I use stunnel for a long time to provide pop3s connections inside a local network. It is quite an old linux server under 2.4 kernel. Stunnel is started from xinetd. xinetd.conf: service pop3s { socket_type = stream wait = no user = root server = /usr/local/bin/stunnel server_args = /usr/local/etc/stunnel/pop3s.conf bind = [ip_address] } /usr/local/etc/stunnel/pop3s.conf: cert = /usr/local/etc/stunnel/mail.pem debug = debug exec = /usr/local/sbin/popa3d execargs = popa3d Everything worked perfectly before 4.30, but when I installed 4.30 pop3s connections just stopped. There is absolutely nothing in logs, just start and stop; example: Mar 24 20:29:51 aldema xinetd[2235]: START: pop3s pid=19123 from=[ip] Mar 24 20:29:51 aldema xinetd[2235]: EXIT: pop3s status=1 pid=19123 duration=0(sec) It is "all.log", i.e. syslog puts everything (*.*) into this file. If starting xinetd with '-v' option, nothing interesting is shown in its own verbose output. When I use 4.29 all.log looks like (with debug = info): Mar 21 09:40:04 aldema xinetd[2235]: START: pop3s pid=32516 from=[ip] Mar 21 09:40:04 aldema stunnel: LOG5[32516:16384]: stunnel 4.29 on i686-pc-linux-gnu with OpenSSL 0.9.7e Mar 21 09:40:04 aldema stunnel: LOG5[32516:16384]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Mar 21 09:40:04 aldema stunnel: LOG5[32516:16384]: stunnel accepted connection from[ip]:4020 Mar 21 09:40:04 aldema stunnel: LOG6[32516:16384]: SSL accepted: new session negotiated Mar 21 09:40:04 aldema stunnel: LOG6[32516:16384]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 Mar 21 09:40:04 aldema stunnel: LOG6[32516:16384]: Local mode child started (PID=32517) Mar 21 09:40:05 aldema popa3d[32517]: Authentication passed for [username] from 127.0.0.1 Mar 21 09:40:05 aldema popa3d[32517]: 0 messages (0 bytes) loaded Mar 21 09:40:05 aldema popa3d[32517]: 0 (0) deleted, 0 (0) left Mar 21 09:40:05 aldema stunnel: LOG6[32516:16384]: SSL_shutdown successfully sent close_notify Mar 21 09:40:05 aldema stunnel: LOG5[32516:16384]: Connection closed: 29 bytes sent to SSL, 48 bytes sent to socket Mar 21 09:40:05 aldema xinetd[2235]: EXIT: pop3s status=0 pid=32516 duration=1(sec) When 4.30 was released I thought it may be buggy because it was marked "experimental", but now I see 4.32 and the same behaviour. Actually, I don't know what to do... nothing in logs really confuses me. Does it mean stunnel crashes at startup (running "stunnel -version" is OK)? Any ideas? Thank you. With the best regards, Denis Solovyov

1 1

Openssl-1.0.0 incompatibility
by Carter Browne 02 Apr '10

02 Apr '10

Is there any update on the compatibility issues between openssl-0.9.8n and openssl-1.0.0? The same configuration file was used in both cases. Linux CentOS 5.4 and SuSE 11.1. Stunnel and openssl both built from sources. I have a number of self-signed certificates in a sub-directory. With openssl-1.0.0, the error is: VERIFY ERROR: depth=0, error= self signed certificate:... SSL_accept: 140890B2: error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned With openssl-0.9.8n VERIFY OK: depth=0, ... I have compiled and linked a version of openssh-5.4p1 from sources with openssl-1.0.0 and it works correctly. Carter -- Carter Browne CBCS cbrowne(a)cbcs-usa.com 781-721-2890

2 1

Re: [stunnel-users] stunnel sends empty list of trusted CAs
by Sebastian Bork 01 Apr '10

01 Apr '10

2010/3/31 Michal Trojnara <Michal.Trojnara(a)mirt.net> > You should have implemented it the other way around: The "cert" option should contain the complete certificate chain of stunnel, > and "CApath"/"CAfile" should only contain the trusted CA certificate for "verify > = 2", and the trusted peer certificate for "verify = 3". Hi, thank you for your quick reply! Alas, I think we started with a misunderstanding. I know how the own certificate and the partner certificates are configured, and the instance with verify=3 works for some thirty partners. All client certificates are validated just as they should be. The file I set in "cert" contains the three certificates in the server certificate chain for stunnel, in the correct order. "CApath" is set to a directory that has all the symlinks with md5 hashes for the client certificates (the certificates themselves are all in their own subdirectories, with another set of symlinks, so I can use the subdirectory for an stunnel client process, and the directory at the top for the server). So when I wrote I put the whole certificate chain for each partner in the CA path, I meant in the directory there is the partner certificate as well as the certificate(s) of the CA that they got their certificate from. With "openssl verify -CApath . partner.crt" I check if everything is complete. Maybe this is overkill, if I do not really need a self-signed certificate at the top, but it shouldn't hurt either. The problem is this: their SAP software (I think they use the Business Connector, but it might be their PI directly, as indicated by the "XI" at the end of the capture file - I am no SAP guru) does not send a partner certificate. The partner claims this is because the "Distinguished Names" list is empty. In this list the server is supposed to send all the CAs it accepts, so the client can then chose one of the certificates it has installed to present it to the server. Since the list is empty, no certificate is found. So I need to find a way to send back a list of accepted root CA certificates. What I tried, and described in the mail, was this: I set up a second stunnel with verify=2. For this, I use the same file in "cert", but a new directory for CApath. In this directory, I have put the symlink for the CA certificate of the partner (their own company-wide CA) , in the hope that this is not only used to verify their client certificate when they present it, but also sent in the Distinguished Names list of accepted CAs. Unfortunately, this did not work, that list is still empty. I have attached the data of the connection attempt, including a screenshot the partner sent us, which shows the field they are talking about with a size of "0", Is there any way, regardless of how complex, to send the DNs? I'll gladly patch the source and compile instead of using a binary package, as long as it helps.

1 0

More Issues with Openssl 1.0.0
by Carter Browne 31 Mar '10

31 Mar '10

My standard configurations of stunnel use the verify=2 option. With recent versions of stunnel and openssl-0.9.8 for Linux systems, I have capath = /capath and stunnel searches directory /capath relative to chroot for the certificates. Using the same configuration file and openssl-1.0.0, this directory is no longer being searched. Any ideas about how to specify the location of capath with openssl-1.0.0? Thanks, Carter -- Carter Browne CBCS cbrowne(a)cbcs-usa.com 781-721-2890

2 1

stunnel sends empty list of trusted CAs
by Sebastian Bork 31 Mar '10

31 Mar '10

Hi, I have a problem which Google did not help me with. A communications partner of one of our customers wants to connect their SAP Business Connector to our platform using HTTPS. Our software does not have SSL/TLS implemented, we rather use stunnel for all communications links, inbound or outbound, where the customer or partner wants to use HTTPS with client authentication. The normal setup is "verify = 3" and the complete certificate chain for each partner is put into the CA path. In most cases, this works without problems. However, in the handshake, after the server certificate is sent and stunnel asks the client to send a client certificate, stunnel sends an empty list of triusted CAs. SAP BC expects the list of supported CAs to contain certificates, instead of being empty. My hope was that using "verify = 2" might help, so I have configured a new server instance of stunnel, and have copied the certificate of the partner's own CA into the CA path. Unfortunately, the partner says it still does not work, and the log file shows they still do not send their certificate when the server asks for a client cert. It seems that stunnel still returns an empty list of trusted CAs, which causes SAP BC to find no certificate to send. Is there any way I can configure stunnel to send back either every certificate found in a path or file, or at least to send back some fixed value for the trusted CAs?

2 1

Problem with openssl-1.0.0
by Carter Browne 30 Mar '10

30 Mar '10

For the Windows version of stunnel-4.31 and 4.32 I tried running stunnel with openssl-1.0.0 compiled for Windows and ssleay32.dll renamed to libssl32.dll. When I make a connection using using stunnel, I get a invalid memory reference to location 0 in libeay32.dll. I have had no problem with this approach with many versions of openssl up through and including openssl-0.9.8n. Any ideas? Carter -- Carter Browne CBCS cbrowne(a)cbcs-usa.com 781-721-2890

2 1

error:1408F10B
by Greg Groth 29 Mar '10

29 Mar '10

I'm having similar issues recently on two separate machines that are producing similar errors. In both instances, /var/log/messages starts filling up with lines similar to the following: SSL_accept: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number I can give further details on both systems, as well as the exact issue, if warranted. First off, can anyone explain what a 1408F10B error is? My gut feeling is that in both instances something changed on the client end (in both instances the client is a version of outlook). Any help would be greatly appreciated. Greg Groth

1 0

Re: [stunnel-users] GNU (clarification)
by tony westenhofer 27 Mar '10

27 Mar '10

Mr. Trojnara, That is what I was after: > Please simply include stunnel source (stunnel-4.xx.tar.gz) on whatever media > (e.g. CD, DVD, web page, etc.) you use to distribute your product together > with stunnel binary. Thank you again for such a wonderful piece of work-- And supporting it!!!!! Best Regards Tony > From: stunnel-users-request(a)mirt.net > Subject: stunnel-users Digest, Vol 68, Issue 9 > To: stunnel-users(a)mirt.net > Date: Sat, 27 Mar 2010 12:00:02 +0100 > > Send stunnel-users mailing list submissions to > stunnel-users(a)mirt.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://stunnel.mirt.net/mailman/listinfo/stunnel-users > or, via email, send a message with subject or body 'help' to > stunnel-users-request(a)mirt.net > > You can reach the person managing the list at > stunnel-users-owner(a)mirt.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of stunnel-users digest..." > > > Today's Topics: > > 1. Re: GNU (Michal Trojnara) > 2. Re: auto-disconnecting people when CRL updated (Michal Trojnara) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 26 Mar 2010 22:27:51 +0100 > From: Michal Trojnara <Michal.Trojnara(a)mirt.net> > Subject: Re: [stunnel-users] GNU > To: stunnel-users(a)mirt.net > Message-ID: <201003262228.10766.Michal.Trojnara(a)mirt.net> > Content-Type: text/plain; charset="utf-8" > > tony westenhofer wrote: > > I am using stunnel (no code modifications) to encrypt communications > > for some applications to eventually be sold. First off outstanding work, > > stunnel saved hours of work having to figure out how to add the security > > desired. > > Thank you. That's exactly why I wrote it. 8-) > > > Now I am wanting to make sure to comply with licensing. > > Can someone be specific and help on this? > > As the author of stunnel I'll be glad to help. > > > I know we have to post a few things on the website for the > > product. (what? a link, an actually dl > > for stunnel...) > > Please simply include stunnel source (stunnel-4.xx.tar.gz) on whatever media > (e.g. CD, DVD, web page, etc.) you use to distribute your product together > with stunnel binary. > > > What about paper distribution for the product, what > > about stunnel must be included? > > I'm not sure I understand your question. > Do you distribute your software on paper? > > Do you mean any advertisement or documentation for your product? > The license does not require that you do anything about it, but it would be > nice of you to mention my name. > > Best regards, > Michal Trojnara > the author of stunnel >

1 0

auto-disconnecting people when CRL updated
by David van Zijl 26 Mar '10

26 Mar '10

Hello Is it possible to get stunnel to disconnect people on a graceful restart when a certificate has expired? Stunnel version 4.30 added the graceful reload option which is great because it will allow us to reload the CRLs, keep everybody connected and prevent new people connecting when their certs have expired (tested and working) - however existing connections are not terminated even though they have just expired... I'm not sure if we've missed a configuration option or if this is just not possible. A little background: We host an IRC server listening on localhost:6667, on top of that we have stunnel listening on the external interface port 6697 We're using the CAfile and CRLpath options to ensure that people are connecting with a valid certificate. Every hour a job runs to download the latest CRL files, if there is a change it restarts stunnel and kicks everybody off (we'd like to use a graceful restart instead) We are running stunnel on Red Hat Linux using the following line inside an init script to run it as a daemon: daemon /usr/local/bin/stunnel /etc/stunnel/stunnel.conf Excerpt from stunnel.conf: setuid = daemon setgid = daemon ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [irc-in] CAfile = /etc/ca/our-chains.pem CRLpath = /etc/crl accept = 192.168.0.1:6697setuid = daemon setgid = daemon connect = localhost:6667 verify = 2 Running stunnel -version tells me: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = daemon.notice pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none Kind Regards Dave

2 1

GNU
by tony westenhofer 26 Mar '10

26 Mar '10

Hello, I am using stunnel (no code modifications) to encrypt communications for some applications to eventually be sold. First off outstanding work, stunnel saved hours of work having to figure out how to add the security desired. Now I am wanting to make sure to comply with licensing. Can someone be specific and help on this? I know we have to post a few things on the website for the product. (what? a link, an actually dl for stunnel...) What about paper distribution for the product, what about stunnel must be included? Please be as specific as you can or better yet point me to an example of someone else already giving proper credit where due. Again thank you for your hard work (all involved). Second question, any recommendations for securing the stunnel folder without interfering with its functionality on Windows systems. Have not had time to try locking down different ntfs setting yet. Thanks in advance and I do apologies if my questions have already been covered in the past. If so please provide url. Tony _________________________________________________________________ Hotmail is redefining busy with tools for the New Busy. Get more from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID27925::T:WLMTAGL:ON:…

2 1

Re: [stunnel-users] Stunnel 4.32 released
by Jose Alf. 26 Mar '10

26 Mar '10

Hi Michal, Thanks for the new 4.32 version. I tested beta 1 and 2 and everything worked fine on my side. Should have been released a day after because OpenSSL released a new version (0.9.8n) the same day. I compiled mine against it on Windows and it works. regards, Jose.

1 0

Still not working with client certificates
by Ron Cordell 24 Mar '10

24 Mar '10

Hello, I'm hoping that someone can give me a hint of where to look at this issue because I'm totally stuck and have been for a few days. When I attempt to use sTunnel in client mode with client certificates, the SSL seems to negotiate the certs and ciphers and then nothing else happens; the services hang. I'm hoping that someone has some insights about something that I haven't looked at, yet. My setup: Server: Windows Server, IIS 7 running SOAP services set for SSL Required, Client Certificate required (transport level client certificate, not SOAP message level). client: Windows machine, simple web application acting as a test client for the SOAP service. In between: sTunnel v4.32 Testing Scenario #1 -- Client configured to use client certificates directly against the IIS 7 service instance. This works as expected. Testing Scenario #2 -- Server configured to not require client certificates, but require SSL. sTunnel configured to listen on local port 8090 and forward to the IIS 7 server. This works as expected. Testing Scenario #3 -- Server configured to require client certificates. sTunnel configured to use client certificate as issued by a local CA in addition to the setup as before. This does not work, but hangs. sTunnel.conf: ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Certificate/key is needed in server mode and optional in client mode ; The default certificate is provided only for testing and should not ; be used in a production environment cert = C:\certs\client-cert-for-internal-environments.pem ;key = c:\certs\test_cert.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ;CApath = certs ; It's often easier to use CAfile ;CAfile = certs.pem ; Don't forget to c_rehash CRLpath ;CRLpath = crls ; Alternatively you can use CRLfile ;CRLfile = crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 output = c:\temp\stunnel.log ; Use it for client mode client = yes ; Service-level configuration ;[pop3s] ;accept = 995 ;connect = 110 ;[imaps] ;accept = 993 ;connect = 143 ;[ssmtp] ;accept = 465 ;connect = 25 [http] accept = 8090 ;connect = 10.12.32.164:443 connect = 10.12.32.68:1443 TIMEOUTclose = 0 ; vim:ft=dosini sTunnel log: 2010.03.24 11:54:31 LOG5[5616:5992]: Reading configuration from file stunnel.conf 2010.03.24 11:54:31 LOG7[5616:5992]: RAND_status claims sufficient entropy for the PRNG 2010.03.24 11:54:31 LOG7[5616:5992]: PRNG seeded successfully 2010.03.24 11:54:31 LOG7[5616:5992]: Certificate: C:\certs\client-cert-for-internal-environments.pem 2010.03.24 11:54:31 LOG7[5616:5992]: Certificate loaded 2010.03.24 11:54:31 LOG7[5616:5992]: Key file: C:\certs\client-cert-for-internal-environments.pem 2010.03.24 11:54:38 LOG7[5616:5992]: Private key loaded 2010.03.24 11:54:38 LOG7[5616:5992]: SSL context initialized for service http 2010.03.24 11:54:38 LOG5[5616:5992]: Configuration successful 2010.03.24 11:54:38 LOG5[5616:5992]: No limit detected for the number of clients 2010.03.24 11:54:38 LOG7[5616:5992]: FD=176 in non-blocking mode 2010.03.24 11:54:38 LOG7[5616:5992]: Option SO_REUSEADDR set on accept socket 2010.03.24 11:54:38 LOG7[5616:5992]: Service http bound to 0.0.0.0:8090 2010.03.24 11:54:38 LOG7[5616:5992]: Service http opened FD=176 2010.03.24 11:54:38 LOG3[5616:5992]: c:\temp\stunnel.log: Input/output error (5) 2010.03.24 11:54:38 LOG3[5616:5992]: Unable to open output file: c:\temp\stunnel.log 2010.03.24 11:54:38 LOG5[5616:5992]: stunnel 4.32 on x86-pc-mingw32-gnu with OpenSSL 0.9.8l 5 Nov 2009 2010.03.24 11:54:38 LOG5[5616:5992]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.03.24 11:54:54 LOG7[5616:6192]: Service http accepted FD=436 from 127.0.0.1:56102 2010.03.24 11:54:54 LOG7[5616:6192]: Creating a new thread 2010.03.24 11:54:54 LOG7[5616:6192]: New thread created 2010.03.24 11:54:54 LOG7[5616:6696]: Service http started 2010.03.24 11:54:54 LOG7[5616:6696]: FD=436 in non-blocking mode 2010.03.24 11:54:54 LOG7[5616:6696]: Option TCP_NODELAY set on local socket 2010.03.24 11:54:54 LOG5[5616:6696]: Service http accepted connection from 127.0.0.1:56102 2010.03.24 11:54:54 LOG7[5616:6696]: FD=456 in non-blocking mode 2010.03.24 11:54:54 LOG6[5616:6696]: connect_blocking: connecting 10.12.32.68:1443 2010.03.24 11:54:54 LOG7[5616:6696]: connect_blocking: s_poll_wait 10.12.32.68:1443: waiting 10 seconds 2010.03.24 11:54:54 LOG5[5616:6696]: connect_blocking: connected 10.12.32.68:1443 2010.03.24 11:54:54 LOG5[5616:6696]: Service http connected remote server from 10.12.47.109:56103 2010.03.24 11:54:54 LOG7[5616:6696]: Remote FD=456 initialized 2010.03.24 11:54:54 LOG7[5616:6696]: Option TCP_NODELAY set on remote socket 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): before/connect initialization 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 write client hello A 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 read server hello A 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 read server certificate A 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 read server done A 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 write client key exchange A 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 write change cipher spec A 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 write finished A 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 flush data 2010.03.24 11:54:54 LOG7[5616:6696]: SSL state (connect): SSLv3 read finished A 2010.03.24 11:54:54 LOG7[5616:6696]: 1 items in the session cache 2010.03.24 11:54:54 LOG7[5616:6696]: 1 client connects (SSL_connect()) 2010.03.24 11:54:54 LOG7[5616:6696]: 1 client connects that finished 2010.03.24 11:54:54 LOG7[5616:6696]: 0 client renegotiations requested 2010.03.24 11:54:54 LOG7[5616:6696]: 0 server connects (SSL_accept()) 2010.03.24 11:54:54 LOG7[5616:6696]: 0 server connects that finished 2010.03.24 11:54:54 LOG7[5616:6696]: 0 server renegotiations requested 2010.03.24 11:54:54 LOG7[5616:6696]: 0 session cache hits 2010.03.24 11:54:54 LOG7[5616:6696]: 0 external session cache hits 2010.03.24 11:54:54 LOG7[5616:6696]: 0 session cache misses 2010.03.24 11:54:54 LOG7[5616:6696]: 0 session cache timeouts 2010.03.24 11:54:54 LOG6[5616:6696]: SSL connected: new session negotiated 2010.03.24 11:54:54 LOG6[5616:6696]: Negotiated ciphers: RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 This is where things time out; nothing happens beyond this point.

1 0

Stunnel 4.32 released
by Michal Trojnara 24 Mar '10

24 Mar '10

Dear Users, I'm glad to announce a new version of stunnel. The ChangeLog entry: Version 4.32, 2010.03.24, urgency: MEDIUM: * New features - New service-level "libwrap" option for run-time control whether /etc/hosts.allow and /etc/hosts.deny are used for access control. Disabling libwrap significantly increases performance of stunnel. - Win32 DLLs for OpenSSL 0.9.8m. * Bugfixes - Fixed a transfer() loop issue with SSLv2 connections. - Fixed a "setsockopt IP_TRANSPARENT" warning with "local" option. - Logging subsystem bugfixes and cleanup. - Installer bugfixes for Vista and later versions of Windows. - FIPS mode can be enabled/disabled at runtime. SHA-1 value for stunnel-4.32.tar.gz: e9be8b9150d1c901a7c37b58494e351815147a79 Home page: http://stunnel.mirt.net/ Download: ftp://stunnel.mirt.net/stunnel/ Best regards, Michal Trojnara

1 0

Trying to use client certificates but no success so far
by Ron Cordell 19 Mar '10

19 Mar '10

Hello, I'm trying to set up sTunnel to use client certificates in the following arrangement: Client Java Server (HTTP) --> sTunnel (HTTPS w/client cert) --> Windows IIS SOAP service, requires client cert The client certificate was generated from a MS CA cert generation tool, one we use for our internal certificates and our internal CA. The client cert was generated as a .pfx file and I used OpenSSL to convert it to a .pem file with the -nodes option. Testing without the client certificates shows that if the IIS hosted SOAP service is set to not require a client certificate, the sTunnel configuration works and we're able to communicate between the HTTP only client and the HTTPS IIS hosted service. However, once we add the certificate, the communication stops at the handshake. I'm wondering if I need to change the client .pem cert to have the private key (don't use the -nodes option when converting using OpenSSL). Here is the contents of the .conf file: ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Certificate/key is needed in server mode and optional in client mode ; The default certificate is provided only for testing and should not ; be used in a production environment cert = user_cert.pem key = user_cert.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ;CApath = certs ; It's often easier to use CAfile ;CAfile = certs.pem ; Don't forget to c_rehash CRLpath ;CRLpath = crls ; Alternatively you can use CRLfile ;CRLfile = crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 output = c:\temp\stunnel.log ; Use it for client mode client = yes ; Service-level configuration ;[pop3s] ;accept = 995 ;connect = 110 ;[imaps] ;accept = 993 ;connect = 143 ;[ssmtp] ;accept = 465 ;connect = 25 [http] accept = 8090 connect = 10.12.32.164:443 TIMEOUTclose = 0 ; vim:ft=dosini Here is the output from the log file showing two attempts to hit the service with the client cert, one from a browser and one from a bit of client code: 2010.03.19 09:58:27 LOG5[5864:4032]: Reading configuration from file stunnel.conf 2010.03.19 09:58:27 LOG7[5864:4032]: RAND_status claims sufficient entropy for the PRNG 2010.03.19 09:58:27 LOG7[5864:4032]: PRNG seeded successfully 2010.03.19 09:58:27 LOG7[5864:4032]: Certificate: user_cert.pem 2010.03.19 09:58:27 LOG7[5864:4032]: Certificate loaded 2010.03.19 09:58:27 LOG7[5864:4032]: Key file: user_cert.pem 2010.03.19 09:58:27 LOG7[5864:4032]: Private key loaded 2010.03.19 09:58:27 LOG7[5864:4032]: SSL context initialized for service http 2010.03.19 09:58:27 LOG5[5864:4032]: Configuration successful 2010.03.19 09:58:27 LOG5[5864:4032]: No limit detected for the number of clients 2010.03.19 09:58:27 LOG7[5864:4032]: FD=176 in non-blocking mode 2010.03.19 09:58:27 LOG7[5864:4032]: Option SO_REUSEADDR set on accept socket 2010.03.19 09:58:27 LOG7[5864:4032]: Service http bound to 0.0.0.0:8090 2010.03.19 09:58:27 LOG7[5864:4032]: Service http opened FD=176 2010.03.19 09:58:27 LOG5[5864:4032]: stunnel 4.31 on x86-pc-mingw32-gnu with OpenSSL 0.9.8l 5 Nov 2009 2010.03.19 09:58:27 LOG5[5864:4032]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.03.19 09:59:42 LOG7[5864:3864]: Service http accepted FD=440 from 127.0.0.1:49886 2010.03.19 09:59:42 LOG7[5864:3864]: Creating a new thread 2010.03.19 09:59:42 LOG7[5864:3864]: New thread created 2010.03.19 09:59:42 LOG7[5864:4328]: Service http started 2010.03.19 09:59:42 LOG7[5864:4328]: FD=440 in non-blocking mode 2010.03.19 09:59:42 LOG7[5864:4328]: Option TCP_NODELAY set on local socket 2010.03.19 09:59:42 LOG5[5864:4328]: Service http accepted connection from 127.0.0.1:49886 2010.03.19 09:59:42 LOG7[5864:4328]: FD=460 in non-blocking mode 2010.03.19 09:59:42 LOG6[5864:4328]: connect_blocking: connecting 10.12.32.164:443 2010.03.19 09:59:42 LOG7[5864:4328]: connect_blocking: s_poll_wait 10.12.32.164:443: waiting 10 seconds 2010.03.19 09:59:42 LOG5[5864:4328]: connect_blocking: connected 10.12.32.164:443 2010.03.19 09:59:42 LOG5[5864:4328]: Service http connected remote server from 10.12.47.109:49887 2010.03.19 09:59:42 LOG7[5864:4328]: Remote FD=460 initialized 2010.03.19 09:59:42 LOG7[5864:4328]: Option TCP_NODELAY set on remote socket 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): before/connect initialization 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 write client hello A 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 read server hello A 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 read server certificate A 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 read server done A 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 write client key exchange A 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 write change cipher spec A 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 write finished A 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 flush data 2010.03.19 09:59:42 LOG7[5864:4328]: SSL state (connect): SSLv3 read finished A 2010.03.19 09:59:42 LOG7[5864:4328]: 1 items in the session cache 2010.03.19 09:59:42 LOG7[5864:4328]: 1 client connects (SSL_connect()) 2010.03.19 09:59:42 LOG7[5864:4328]: 1 client connects that finished 2010.03.19 09:59:42 LOG7[5864:4328]: 0 client renegotiations requested 2010.03.19 09:59:42 LOG7[5864:4328]: 0 server connects (SSL_accept()) 2010.03.19 09:59:42 LOG7[5864:4328]: 0 server connects that finished 2010.03.19 09:59:42 LOG7[5864:4328]: 0 server renegotiations requested 2010.03.19 09:59:42 LOG7[5864:4328]: 0 session cache hits 2010.03.19 09:59:42 LOG7[5864:4328]: 0 external session cache hits 2010.03.19 09:59:42 LOG7[5864:4328]: 0 session cache misses 2010.03.19 09:59:42 LOG7[5864:4328]: 0 session cache timeouts 2010.03.19 09:59:42 LOG6[5864:4328]: SSL connected: new session negotiated 2010.03.19 09:59:42 LOG6[5864:4328]: Negotiated ciphers: RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 2010.03.19 10:01:54 LOG3[5864:4328]: SSL_read: Connection reset by peer (WSAECONNRESET) (10054) 2010.03.19 10:01:54 LOG5[5864:4328]: Connection reset: 568 bytes sent to SSL, 0 bytes sent to socket 2010.03.19 10:01:54 LOG7[5864:4328]: Service http finished (0 left) 2010.03.19 10:03:28 LOG7[5864:3864]: Service http accepted FD=476 from 127.0.0.1:50155 2010.03.19 10:03:28 LOG7[5864:3864]: Creating a new thread 2010.03.19 10:03:28 LOG7[5864:3864]: New thread created 2010.03.19 10:03:28 LOG7[5864:1216]: Service http started 2010.03.19 10:03:28 LOG7[5864:1216]: FD=476 in non-blocking mode 2010.03.19 10:03:28 LOG7[5864:1216]: Option TCP_NODELAY set on local socket 2010.03.19 10:03:28 LOG5[5864:1216]: Service http accepted connection from 127.0.0.1:50155 2010.03.19 10:03:28 LOG7[5864:1216]: FD=440 in non-blocking mode 2010.03.19 10:03:28 LOG6[5864:1216]: connect_blocking: connecting 10.12.32.164:443 2010.03.19 10:03:28 LOG7[5864:1216]: connect_blocking: s_poll_wait 10.12.32.164:443: waiting 10 seconds 2010.03.19 10:03:28 LOG5[5864:1216]: connect_blocking: connected 10.12.32.164:443 2010.03.19 10:03:28 LOG5[5864:1216]: Service http connected remote server from 10.12.47.109:50156 2010.03.19 10:03:28 LOG7[5864:1216]: Remote FD=440 initialized 2010.03.19 10:03:28 LOG7[5864:1216]: Option TCP_NODELAY set on remote socket 2010.03.19 10:03:28 LOG7[5864:1216]: SSL state (connect): before/connect initialization 2010.03.19 10:03:28 LOG7[5864:1216]: SSL state (connect): SSLv3 write client hello A 2010.03.19 10:03:28 LOG7[5864:1216]: SSL state (connect): SSLv3 read server hello A 2010.03.19 10:03:28 LOG7[5864:1216]: SSL state (connect): SSLv3 read finished A 2010.03.19 10:03:28 LOG7[5864:1216]: SSL state (connect): SSLv3 write change cipher spec A 2010.03.19 10:03:28 LOG7[5864:1216]: SSL state (connect): SSLv3 write finished A 2010.03.19 10:03:28 LOG7[5864:1216]: SSL state (connect): SSLv3 flush data 2010.03.19 10:03:28 LOG7[5864:1216]: 1 items in the session cache 2010.03.19 10:03:28 LOG7[5864:1216]: 2 client connects (SSL_connect()) 2010.03.19 10:03:28 LOG7[5864:1216]: 2 client connects that finished 2010.03.19 10:03:28 LOG7[5864:1216]: 0 client renegotiations requested 2010.03.19 10:03:28 LOG7[5864:1216]: 0 server connects (SSL_accept()) 2010.03.19 10:03:28 LOG7[5864:1216]: 0 server connects that finished 2010.03.19 10:03:29 LOG7[5864:1216]: 0 server renegotiations requested 2010.03.19 10:03:29 LOG7[5864:1216]: 1 session cache hits 2010.03.19 10:03:29 LOG7[5864:1216]: 0 external session cache hits 2010.03.19 10:03:29 LOG7[5864:1216]: 0 session cache misses 2010.03.19 10:03:29 LOG7[5864:1216]: 0 session cache timeouts 2010.03.19 10:03:29 LOG6[5864:1216]: SSL connected: previous session reused 2010.03.19 10:04:28 LOG7[5864:1216]: Socket closed on read 2010.03.19 10:04:28 LOG7[5864:1216]: SSL write shutdown 2010.03.19 10:04:28 LOG7[5864:1216]: SSL alert (write): warning: close notify 2010.03.19 10:04:28 LOG6[5864:1216]: SSL_shutdown successfully sent close_notify 2010.03.19 10:04:28 LOG6[5864:1216]: s_poll_wait timeout: connection close 2010.03.19 10:04:28 LOG5[5864:1216]: Connection closed: 1541 bytes sent to SSL, 25 bytes sent to socket 2010.03.19 10:04:28 LOG7[5864:1216]: Service http finished (0 left) Any hints would be appreciated!

1 0

How to have multiple HTTPS connection with different PEM file
by Andrew Culross 18 Mar '10

18 Mar '10

We are running sTunnel 4.2 and want to have two HTTPS connection that use different PEM certs and are having difficulty doing this - how do you set this up? We have something like ---- Cert = cert1.pem [https] connect = xxx.xxx.xxx.xxx:442 connect = yyy.yyy.yyy.yyy:443 accept = 9876 ------ and we need something like this? -------- [https] connect = xxx.xxx.xxx.xxx:442 cert = cert1.pem accept = 9876 [https] connect = yyy.yyy.yyy.yyy:443 cert = cert2.pem accept = 9877 ----- Can we do that in the config file? If not, how does one specify ? Thanks! Andrew Culross TwoFour Systems 445 Hamilton Ave White Plains, NY 10601 Direct +1 (914) 220-8849 Main +1 (914) 220-8800 Fax +1 (914) 220-8899 <http://www.twofour.com/> www.TwoFour.com <http://www.twofour.com/emaildisclaimer.aspx> http://www.twofour.com/emaildisclaimer.aspx

2 1

Stunnel server with access from Firefox
by Ricky I 16 Mar '10

16 Mar '10

Hi, I am trying to use Stunnel to provide HTTPS access to a web site (my router configurations). That is, stunnel is used to accept HTTPS connection and it forwards the request using HTTP to the web site. The problem seems to be that one connection is opened and it performs an HTTP GET. Afterwards Stunnel does not accept any more connections and I have to restart. I'm not sure what I'm doing wrong. The strange thing I notice is that service router is finished with -1. What does minus one mean? I am using Firefox as the client. What I see is that Firefox is trying to load the page. Using wireshark, I was able to see that all the HTML data from the web page was loaded but Firefox was having trouble performing HTTP GET for the images on the site. I need to restart Stunnel in order to have another connection open. This is confirmed where I made a test by restarting Stunnel and then I tried to just load images from the Web site: e.g. https://192.168.1.88:8880/image1.jpg and https://192.168.1.88:8880/image2.jpg. I get image1.jpg but Firefox can't access image2.jpg, unless I restart then get image2. Here's the logs showing that I am able to make one access to the site. 2010.03.16 00:47:41 LOG5[3266:1024]: stunnel 4.31 on armv5tejl-unknown-linux-gnu with OpenSSL 0.9.8k 25 Mar 2009 2010.03.16 00:47:41 LOG5[3266:1024]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 2010.03.16 00:47:41 LOG7[3266:1024]: Cleaning up the signal pipe 2010.03.16 00:47:41 LOG7[3266:1024]: Signal pipe is empty 2010.03.16 00:47:46 LOG7[3266:1024]: Service router accepted FD=0 from 192.168.1.80:2821 2010.03.16 00:47:46 LOG7[3268:1026]: Service router started 2010.03.16 00:47:46 LOG7[3268:1026]: FD=0 in non-blocking mode 2010.03.16 00:47:46 LOG7[3268:1026]: Option TCP_NODELAY set on local socket 2010.03.16 00:47:46 LOG5[3268:1026]: Service router accepted connection from 192.168.1.80:2821 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): before/accept initialization 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 read client hello A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write server hello A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write certificate A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write server done A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 flush data 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 read client key exchange A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 read finished A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write change cipher spec A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write finished A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 flush data 2010.03.16 00:47:46 LOG7[3268:1026]: 1 items in the session cache 2010.03.16 00:47:46 LOG7[3268:1026]: 0 client connects (SSL_connect()) 2010.03.16 00:47:46 LOG7[3268:1026]: 0 client connects that finished 2010.03.16 00:47:46 LOG7[3268:1026]: 0 client renegotiations requested 2010.03.16 00:47:46 LOG7[3268:1026]: 1 server connects (SSL_accept()) 2010.03.16 00:47:46 LOG7[3268:1026]: 1 server connects that finished 2010.03.16 00:47:46 LOG7[3268:1026]: 0 server renegotiations requested 2010.03.16 00:47:46 LOG7[3268:1026]: 0 session cache hits 2010.03.16 00:47:46 LOG7[3268:1026]: 0 external session cache hits 2010.03.16 00:47:46 LOG7[3268:1026]: 1 session cache misses 2010.03.16 00:47:46 LOG7[3268:1026]: 0 session cache timeouts 2010.03.16 00:47:46 LOG6[3268:1026]: SSL accepted: new session negotiated 2010.03.16 00:47:46 LOG6[3268:1026]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 2010.03.16 00:47:46 LOG7[3268:1026]: FD=9 in non-blocking mode 2010.03.16 00:47:46 LOG6[3268:1026]: connect_blocking: connecting 192.168.1.1:80 2010.03.16 00:47:46 LOG7[3268:1026]: connect_blocking: s_poll_wait 192.168.1.1:80: waiting 10 seconds 2010.03.16 00:47:46 LOG5[3268:1026]: connect_blocking: connected 192.168.1.1:80 2010.03.16 00:47:46 LOG5[3268:1026]: Service router connected remote server from 192.168.1.88:1133 2010.03.16 00:47:46 LOG7[3268:1026]: Remote FD=9 initialized 2010.03.16 00:47:46 LOG7[3268:1026]: Option TCP_NODELAY set on remote socket 2010.03.16 00:47:46 LOG7[3268:1026]: Socket closed on read 2010.03.16 00:47:46 LOG7[3268:1026]: SSL write shutdown 2010.03.16 00:47:46 LOG7[3268:1026]: SSL alert (write): warning: close notify 2010.03.16 00:47:46 LOG6[3268:1026]: SSL_shutdown successfully sent close_notify 2010.03.16 00:47:46 LOG6[3268:1026]: s_poll_wait timeout: connection close 2010.03.16 00:47:46 LOG5[3268:1026]: Connection closed: 4675 bytes sent to SSL, 445 bytes sent to socket 2010.03.16 00:47:46 LOG7[3268:1026]: Service router finished (-1 left) ============ Finally here's my stunnel.conf: cert = /mnt/HD_a2/ffp/etc/stunnel/stunnel.pem sslVersion = SSLv3 pid = /stunnel.pid ; performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; debugging stuff (may useful for troubleshooting) debug = 7 output = /ffp/etc/stunnel/stunnel.log ; service-level configuration [router] accept = 8880 connect = 192.168.1.1:80 TIMEOUTclose = 0 Thank you very much for any help you can provide. Rick _________________________________________________________________ Check your Hotmail from your phone. http://go.microsoft.com/?linkid=9712957

1 0

DSA server certificate
by Carl 15 Mar '10

15 Mar '10

Hi, Does stunnel support server certificate with a DSA private key? When I try to use a self generated one, stunnel responds with: error stack: 140B3009 : error:140B3009:SSL routines:SSL_CTX_use_RSAPrivateKey_file:PEM lib SSL_CTX_use_RSAPrivateKey_file: 607907F: error:0607907F:digital envelope routines:EVP_PKEY_get1_RSA:expecting an rsa key Is this bug report relevant? http://www.mail-archive.com/[email protected]/msg43770.ht… Thanks, Carl

1 0

How do you configure Stunnel Ver 4.31 for TLSv1 - More Info
by David M. Douglass 11 Mar '10

11 Mar '10

Reference: Stunnel Ver 4.31 Windows Binaries This is the actual configuration file I am using. There is not too much to it. As shown below, this WORKS for Gmail's SSL port.. Port 465. Notice that the sslVersion statement is remarked "out". +++++++++++++++++++++++++++ output = STUNNEL.log taskbar = NO cert = stunnel.pem client = yes [SSMTP] accept=DADSXPPRO:8025 connect=smtp.gmail.com:465 ;sslVersion = TLSv1 ++++++++++++++++++++++++++++ In theory (as I have read it...), to change this to TLS, I enable the sslVersion line, And change the port (for Gmail) to 587. Port 587 and TLS for Gmail have been tested and verified via Microsoft Outlook testing. But when I do so, I cannot even log onto the Gmail server. I get the error message referenced in the first message: 2010.02.25 10:35:44 LOG3[2696:2740]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number It occurs to me that I am only using the "stunnel.pem" file, as supplied by the installer program. Do I have a certificate issue? David M. Douglass david(a)az-douglass.net Home (480) 839-2629 Cell (602) 908-9092

4 5

Problem with openssl engine
by Nick Sayer 27 Feb '10

27 Feb '10

I'm trying to use a smart card to hold on to the private key for my server. Since access to the smart card is restricted to one process at a time (not sure why it can't be shared, but that's a whole separate discussion), I'd like to use stunnel as the machine-wide SSL proxy. The problem is that with the pkcs11 engine configuration set up, it fails. 2010.02.27 00:15:03 LOG5[91580:0]: imaps accepted connection from 71.141.64.2:32934 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): before/accept initialization 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 read client hello A 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 write server hello A 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 write certificate A 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 write server done A 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 flush data 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 read client key exchange A 2010.02.27 00:15:03 LOG7[91580:0]: SSL alert (write): fatal: bad record mac 2010.02.27 00:15:03 LOG3[91580:0]: SSL_accept: 1408F119: error:1408F119:SSL routines:SSL3_GET_RECORD:decryption failed or bad record mac 2010.02.27 00:15:03 LOG5[91580:0]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2010.02.27 00:15:03 LOG7[91576:0]: Cleaning up the signal pipe 2010.02.27 00:15:03 LOG7[91576:0]: Process 91580 finished with code 0 (0 left) ^C2010.02.27 00:15:42 LOG3[91576:0]: Received signal 2; terminating This happens *whether or not* I use the private key on the smart card itself. If I load the private key from a disk file, it still happens - even if there is no engineNum statement in the service configuration block. The only way to make it not happen is to comment out the engineCtrl lines. engine=dynamic engineCtrl=SO_PATH:/usr/local/lib/engines/engine_pkcs11.so engineCtrl=ID:pkcs11 engineCtrl=LIST_ADD:1 engineCtrl=LOAD engineCtrl=MODULE_PATH:/usr/local/lib/pkcs11/opensc-pkcs11.so engineCtrl=INIT engineCtrl=PIN:12345678 [imaps] accept = 4993 connect = 143 engineNum = 1 key = id_10 ;cert = id_10 cert = /www.crt It's also worth noting that stunnel seems unable to pull the cert out of the card - that cert=id_10 line should work (works with openssl s_server). This stunnel was compiled last night from the FreeBSD ports tree with WITH_STUNNEL_SSL_ENGINE turned on. stunnel 4.29 on i386-portbld-freebsd8.0 with OpenSSL 0.9.8k 25 Mar 2009 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Global options debug = 5 pid = /var/tmp/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = /usr/local/etc/stunnel/stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none Note that the same card in the same system can successfully provide ssl server sockets with Java using the Sun PKCS11 JCE provider configured to talk to the opensc PKCS11 module. So there's nothing wrong with the card.

1 0

stunnel-4.15-2.el5.1 zombie when xinetd
by tatiana philippova 25 Feb '10

25 Feb '10

Hi All, I have a problem with stunnel in xinetd mode. It cannot connect to specified localhost:port - always getting child stunnel defunct as a result.. 4789 ? Ss 0:00 \_ stunnel /etc/stunnel/stunnel.conf 4790 ? Z 0:00 \_ [stunnel] <defunct> I'm trying use rsync via stunnel (!ssh for rsync does not suits me in this particular case, but I need encrypt backup traffic anyway.. so have chosen stunnel) client config: cert = /etc/stunnel/stunnel_client_cert.pem client = yes pid = /var/run/stunnel.pid debug = 7 output = /var/log/stunnel.log sslVersion = SSLv2 [ssync] accept = 873 connect = myhost.somewhere.net:273 server config: cert = /etc/stunnel/certs/host.pem key = /etc/stunnel/certs/private/cakey.pem client = no pid = /var/run/stunnel.pid debug = 7 #foreground = yes output = /var/log/stunel.log connect = 873 xinetd config: # default: off # description: SSL wrapper for rsyncd service ssync { disable = no socket_type = stream wait = no user = root server = /usr/sbin/stunnel server_args = /etc/stunnel/stunnel.conf log_on_success += HOST DURATION log_on_failure += HOST only_from = 192.168.5.15 127.0.0.1 } on server side /etc/services: ssync 273/tcp # rsync over stunnel # ps axf | grep rsyn 15637 ? S 0:00 /usr/bin/rsync -4 --daemon --no-detach # netstat -an --program | grep 273 tcp 0 0 0.0.0.0:273 0.0.0.0:* LISTEN 4751/xinetd # netstat -an --program | grep 873 tcp 0 0 127.0.0.1:873 0.0.0.0:* LISTEN 15637/rsync In case of server stunnel running as standalone - everything works perfectly well, but I need it working as xinetd service rather than standalone Could somebody kindly advise what I'm doing wrong? soft on server side: stunnel-4.15-2.el5.1, openssl-0.9.8e-7.el5 OS CentOS release 5.3 (Final), kernel 2.6.18-128.1.6.el5 on client side: stunnel-4.30-1.i386.rpm (compiled as rpmbuild -ta stunnel-4.30.tar.gz) openssl-0.9.8g-9.14.fc9.i686 OS Fedora release 9 (Sulphur) kernel 2.6.28 Many thanks in advance Taphy

1 0

How do you configure Stunnel Ver 4.31 for TLSv1
by David M. Douglass 25 Feb '10

25 Feb '10

I am using the Windows Binary of Version 4.31, and an external email utility that sends SMTP outgoing email. I can configure for specific ports (no problem). and I can send SSMTP SSLv3 with success. That is GOOD ! I am trying to configure Stunnel for sending TLSv1 without success. I understand (via the Version command and screen) that Stunnel defaults to SSLv3. How do I change that to TLSv1 ?? I found the parameter : sslVersion = version select version of SSL protocol Allowed options: all, SSLv2, SSLv3, TLSv1 This appears to be a "SERVICE LEVEL" option, and I have tried to use the line: sslVersion = TLSv1 in the [SSMTP] group of options (along with accept = and connect = ), but get an error message in the log file, which is shown next: 2010.02.25 10:35:44 LOG3[2696:2740]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number I have also tried to put the sslVersion = line in the general configuration area, but generate the same error message. The outbound email does, in fact, fail. Can anyone suggest what I am doing wrong ?? Or offer a solution for configuring Stunnel (V4.31) for TLSv1 ?? David M. Douglass david(a)az-douglass.net Home (480) 839-2629 Cell (602) 908-9092

1 0

How to use stunnel
by Gabriel kamega 24 Feb '10

24 Feb '10

Hello sir, Thank you for my subscription. This is the issue: I want to sent automaticly email via smtp.gmail.com server, And I think I need stunnel program. My questions are : *How to use stunnel ?* ; *How to configure the stunnel.conf file ?* I have dowloaded stunnel.exe version 431, but I can't download the * stunnel.pem* file. on the net I see that I have to install with this command : stunnel -install is that all ? on WXP Professionnel SP2 Regards merci

1 0

Access control/TCP wrappers
by Craig Watkinson 23 Feb '10

23 Feb '10

Hi, We're using stunnel to provide a secure interface to an old server that doesn't support HTTPS natively. I'd like to implement some access control so that connections are only supported from specific IP addresses. I am using v4.27 of stunnel that I downloaded from HPs website, and am running it from inittab to ensure it is always running. Unfortunately I don't think it's compiled with libwrap. Should I see libwrap listed when I run ldd against the binary (see below for output)? I think it's possible to run stunnel from inetd. Could I wrapper it here? Is the following entry correct? stunnel stream tcp nowait root /usr/lbin/tcpd /opt/iexpress/stunnel/bin/stunnel stunnel I think this would work, but I'm concerned that if stunnel was to crash or be killed that there would be nothing restarting it if we ran it from inetd. Any advice much appreciated Craig ------------------------------------- # ./stunnel -version stunnel 4.27 on ia64-hp-hpux11.23 with OpenSSL 0.9.7m 23 Feb 2007 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Global options debug = 5 pid = /opt/iexpress/stunnel/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /opt/iexpress/stunnel/etc/stunnel/stunnel.pem ciphers = ALL:!aNULL:!eNULL+RC4:@STRENGTH key = /opt/iexpress/stunnel/etc/stunnel/stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none # ldd ./stunnel libdl.so.1 => /usr/lib/hpux32/libdl.so.1 libnsl.so.1 => /usr/lib/hpux32/libnsl.so.1 libpthread.so.1 => /usr/lib/hpux32/libpthread.so.1 libunwind.so.1 => /usr/lib/hpux32/libunwind.so.1 libc.so.1 => /usr/lib/hpux32/libc.so.1 libxti.so.1 => /usr/lib/hpux32/libxti.so.1 libuca.so.1 => /usr/lib/hpux32/libuca.so.1 libdl.so.1 => /usr/lib/hpux32/libdl.so.1 _________________________________________________________________ Do you have a story that started on Hotmail? Tell us now http://clk.atdmt.com/UKM/go/195013117/direct/01/

2 2

4.26 and commercial certificate - Now working.
by Editor (Kevin) 20 Feb '10

20 Feb '10

Hi: Thanks. Everything is working now. > Message: 1 > Date: Wed, 17 Feb 2010 07:11:16 -0800 (PST) > From: Leandro Avila <leandro.avila(a)ymail.com> > Subject: Re: [stunnel-users] Small challenge with version 4.26 and a > commercial certificate > To: stunnel-users(a)mirt.net > Message-ID: <544640.49520.qm(a)web111011.mail.gq1.yahoo.com> > Content-Type: text/plain; charset=us-ascii > > Hi Kevin, > > I think there is ambiguous information about this. > The man page states that the private key should be unencrypted > However, the changelog states that the support for pass phrases was fixed in v4.20 > > I'll do some testing see what I can find. Or maybe someone can shed some light on the issue. > > Best regards > > ----------------- > Leandro Avila

1 0

Re: [stunnel-users] Make reports an error on Aix with stunnel-4.30
by Michal Trojnara 19 Feb '10

19 Feb '10

Derek Nicholls wrote: > gcc -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith > -I/opt/freeware/include -o stunnel file.o client.o log.o options.o > protocol.o network.o resolver.o ssl.o ctx.o verify.o sthreads.o stunnel.o > pty.o libwrap.o -lz -ldl -L/opt/freeware/lib -lssl -lcrypto > ld: 0711-317 ERROR: Undefined symbol: .SSL_CTX_set_info_callback > ld: 0711-317 ERROR: Undefined symbol: .SSL_CTX_sess_set_new_cb > ld: 0711-317 ERROR: Undefined symbol: .SSL_CTX_sess_set_get_cb > ld: 0711-317 ERROR: Undefined symbol: .SSL_CTX_sess_set_remove_cb > ld: 0711-317 ERROR: Undefined symbol: .BIO_set_flags > ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more > information. > collect2: ld returned 8 exit status > make: 1254-004 The error code from the last command is 1. What it means is that the linker has found on its path another version of libssl, older than your headers in /opt/freeware/include. Mike

1 0

Cert Chain Question
by Craig Kelley 18 Feb '10

18 Feb '10

I've been attempting to include an intermediate chain for my stunnel setup. First, I previously used an entrust-signed certificate with stunnel just fine, but now I've purchased one from godaddy ($190 for 3 certs for 5 years!). The only problem is that the server has multiple certificates to install. Under Apache, I solved it with this: SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key SSLCertificateChainFile /etc/httpd/conf/ssl.crt/godaddy.crt Which works just fine. With stunnel I attempted this configuration: cert = /etc/stunnel/server.crt key = /etc/stunnel/server.key CAfile = /etc/stunnel/godaddy.crt All those files are identical to the Apache configuration. Stunnel starts up, but clients loudly complain that the certificate is not valid. If I examine the certificate in Thunderbird (I use stunnel for IMAPS and POP3S), it correctly identifies the cert as being from GoDaddy and that it will expire in 2015. But for some reason, the chain to its root server is broken. What am I doing wrong? -- Craig Kelley http://inconnu.islug.org/~ink finger same server for PGP block

2 2

Small challenge with version 4.26 and a commercial certificate
by editor 17 Feb '10

17 Feb '10

Hi: I decided to spend the money and get a commercial certificate from Thawte. It was not a bad price. I have installed in the Sun host and while it works perfectly for Apache but I can not get the file to work for stunnel. The idea is to allow mobile users to access their mail without annoying certificate warnings. This is what happens: # /usr/local/bin/stunnel & [1] 13704 # Enter PEM pass phrase: 2010.02.14 05:32:46 LOG7[13704:1]: Snagged 64 random bytes from /export/home/kgreene/.rnd 2010.02.14 05:32:46 LOG7[13704:1]: Wrote 1024 new random bytes to /export/home/kgreene/.rnd 2010.02.14 05:32:46 LOG7[13704:1]: RAND_status claims sufficient entropy for the PRNG 2010.02.14 05:32:46 LOG7[13704:1]: PRNG seeded successfully 2010.02.14 05:32:46 LOG7[13704:1]: Certificate: /usr/local/etc/stunnel/stunnel.pem 2010.02.14 05:32:46 LOG7[13704:1]: Certificate loaded 2010.02.14 05:32:46 LOG7[13704:1]: Key file: /usr/local/etc/stunnel/stunnel.pem 2010.02.14 05:32:46 LOG3[13704:1]: error stack: 140B3009 : error:140B3009:SSL routines:SSL_CTX_use_RSAPrivateKey_file:PEM lib 2010.02.14 05:32:46 LOG3[13704:1]: error stack: 906A068 : error:0906A068:PEM routines:PEM_do_header:bad password read 2010.02.14 05:32:46 LOG3[13704:1]: SSL_CTX_use_RSAPrivateKey_file: 906406D: error:0906406D:PEM routines:PEM_def_callback:problems getting password [1]+ Exit 1 /usr/local/bin/stunnel # It never pauses to let me enter the PEM pass phase. As in instructed in the man pages, I created the pem file by merging the private key and the certificate from Thawte. This is the version statement: # /usr/local/bin/stunnel -version stunnel 4.26 on sparc-sun-solaris2.9 with OpenSSL 0.9.8l 5 Nov 2009 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = /usr/local/etc/stunnel/stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none ------------------------------- Any ideas would be great. Thanks. Kevin

3 2

nessus crashes stunnel
by Roger Cruz 12 Feb '10

12 Feb '10

We ran Nessus on a Linux system and found that stunnel crashes when the weak certificate suite is enabled. GDB shows the stack trace below and it appears to be in the SSL library. My search on this mailing list led me to this message that appears to report a similar problem http://mirt.net/pipermail/stunnel-users/2008-January/001830.html Am I to understand that the problem is really with OpenSSL and that's what needs to be upgraded? If so, do we know what version will have the fixed problem? I'm going to post in the OpenSSL forum as well, but I wanted to start here since from our perspective, Stunnel is the one crashing. Thank you Roger Cruz 2010.02.05 12:49:11 LOG7[13524:3086718672]: Cleaning up the signal pipe 2010.02.05 12:49:11 LOG6[13524:3086718672]: Child process 13575 finished with code 0 Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0xb7fa7b90 (LWP 13574)] 0x007b24a7 in krb5_is_referral_realm () from /usr/lib/libkrb5.so.3 (gdb) bt #0 0x007b24a7 in krb5_is_referral_realm () from /usr/lib/libkrb5.so.3 #1 0x0089d338 in kssl_keytab_is_available () from /lib/libssl.so.6 #2 0x008803b1 in ssl3_choose_cipher () from /lib/libssl.so.6 #3 0x0087b2a2 in ssl3_get_client_hello () from /lib/libssl.so.6 #4 0x0087bc85 in ssl3_accept () from /lib/libssl.so.6 #5 0x0089109a in SSL_accept () from /lib/libssl.so.6 #6 0x00884d0d in ssl23_get_client_hello () from /lib/libssl.so.6 #7 0x0088554b in ssl23_accept () from /lib/libssl.so.6 #8 0x0089109a in SSL_accept () from /lib/libssl.so.6 #9 0x003628e2 in ?? () from /usr/sbin/stunnel #10 0x00363acd in ?? () from /usr/sbin/stunnel #11 0x003645ba in ?? () from /usr/sbin/stunnel #12 0x003646a8 in client () from /usr/sbin/stunnel #13 0x0025f45b in start_thread () from /lib/libpthread.so.0 #14 0x00448e5e in clone () from /lib/libc.so.6 (gdb) quit [root@p20xen1 current_hq]# stunnel -version stunnel 4.15 on i686-redhat-linux-gnu with OpenSSL 0.9.8b 04 May 2006 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH key = /etc/stunnel/stunnel.pem session = 300 seconds TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none

1 0

using ECDH with stunnel
by Carl 11 Feb '10

11 Feb '10

Is is possible to use ECDH with stunnel? When using s_server and specifying the cipher I can establish a connection. But when using stunnel and specifing the same cipher, the connection is rejected with "no shared cipher". e.g. openssl s_server -cert server.pem -cipher DHE-RSA-AES256-SHA It appears the difference is that s_server uses "default temp ECDH parameters" while stunnel doesn't have a default nor is there a way to specify the ECDH parameters. >From what I understand the ECDH parameters cannot be included with the certificate, unlike DH parameters. Is my understanding correct? Thanks, Carl

2 2

SSL connection through Proxy server with authentication
by Girish Kolari 09 Feb '10

09 Feb '10

Hi I am trying to create a SSL connection through Proxy server with authentication. my stunnel.conf file ----- part of the conf file connect = <Proxy server IP: Port number> protocol=connect protocolHost=<Destination server:Port number> protocolUsername = useme protocolPassword = test ----- but it fails to establish connection. Log details: ----- part of log generated 2010.02.09 16:07:49 LOG5[14506:2952859648]: Negotiations for connect (client side) started 2010.02.09 16:07:49 LOG7[14506:2952859648]: -> CONNECT <Destination server:Port number> HTTP/1.1 2010.02.09 16:07:49 LOG7[14506:2952859648]: -> Host: 6<Destination server:Port number> 2010.02.09 16:07:49 LOG7[14506:2952859648]: -> Proxy-Authorization: basic dXNlbWU6dGVzdA== 2010.02.09 16:07:49 LOG7[14506:2952859648]: -> 2010.02.09 16:07:49 LOG3[14506:2952859648]: Unexpected socket close (fdgetline) 2010.02.09 16:07:49 LOG5[14506:2952859648]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2010.02.09 16:07:49 LOG7[14506:2952859648]: Service IDrive finished (0 left) ----- I tried with proxy server without authentication it works great, but not sure why Proxy server with authentication is not working. Is it I am missing some thing or am I doing something wrong? I appreciate all suggestion and help on this. Thanks & Regards Girish Kolari

1 0

Stunnel and multiple endpoints.
by Richard Harvey 08 Feb '10

08 Feb '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi guys, I'm new to stunnel and I'm looking for a way to run stunnel on a single port. Then based on the client certificate, proxy that connection (in clear) to a different IP:port. If this something I can do with stunnel or am i barking up the wrong tree so to speak. Any help would be a appreciated guys. Cheers Ric - -- Richard Harvey European Linux Administrator Core Systems Ticketmaster +44 (0)207 9804328 80228 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAktv5ZIACgkQlh7dZJ0PyjcfxQCfWA5PO0d/uDf/Mqq2BrFsu5wf xBYAoKmKW8760P91JR3oeviKwjd/1o/A =o+/U -----END PGP SIGNATURE-----

3 5

Re: [stunnel-users] Memory problems
by Peter Griffin 05 Feb '10

05 Feb '10

A portion of the messages in /var/log/stunnel.log before I disabled logging as I thought it would help: 2010.02.04 22:46:28 LOG3[1615:140132721108752]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:46:32 LOG3[1615:140132721108752]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:46:55 LOG3[1615:140132734469904]: getpeerbyname: Transport endpoint is not connected (107) 2010.02.04 22:46:57 LOG3[1615:140132734400272]: SSL_read: Connection reset by peer (104) 2010.02.04 22:47:12 LOG3[1615:140132734261008]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:47:35 LOG3[1615:140132735235856]: SSL_read: Connection reset by peer (104) 2010.02.04 22:48:08 LOG3[1615:140132733982480]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:48:09 LOG3[1615:140132721108752]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:48:09 LOG3[1615:140132721108752]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:48:09 LOG3[1615:140132721108752]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:48:23 LOG3[1615:140132735235856]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:48:42 LOG3[1615:140132733982480]: transfer() loop executes not transferring any data 2010.02.04 22:48:42 LOG3[1615:140132733982480]: please report the problem to Michal.Trojnara(a)mirt.net 2010.02.04 22:48:42 LOG3[1615:140132733982480]: socket open: rd=yes wr=no, ssl open: rd=no wr=yes 2010.02.04 22:48:42 LOG3[1615:140132733982480]: socket ready: rd=no wr=no, ssl ready: rd=yes wr=no 2010.02.04 22:48:42 LOG3[1615:140132733982480]: wants: SSL_read rd=no wr=no, SSL_write rd=no wr=yes, SSL_shutdown rd=no wr=no 2010.02.04 22:48:42 LOG3[1615:140132733982480]: socket input buffer: 16384 byte(s), ssl input buffer: 0 byte(s) 2010.02.04 22:48:42 LOG3[1615:140132733982480]: check_SSL_pending=0 2010.02.04 22:48:52 LOG3[1615:140132734261008]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:48:56 LOG3[1615:140132734261008]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:01 LOG3[1615:140132734330640]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:03 LOG3[1615:140132734400272]: SSL socket closed on SSL_read with 7294 byte(s) in buffer 2010.02.04 22:49:05 LOG3[1615:140132734469904]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:16 LOG3[1615:140132721108752]: SSL socket closed on SSL_read with 16384 byte(s) in buffer 2010.02.04 22:49:26 LOG3[1615:140132733982480]: SSL socket closed on SSL_read with 16384 byte(s) in buffer 2010.02.04 22:49:28 LOG3[1615:140132733982480]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:29 LOG3[1615:140132733982480]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:29 LOG3[1615:140132733982480]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:29 LOG3[1615:140132733982480]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:29 LOG3[1615:140132733982480]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:34 LOG3[1615:140132733982480]: getpeerbyname: Transport endpoint is not connected (107) 2010.02.04 22:49:35 LOG3[1615:140132720899856]: SSL_accept: Peer suddenly disconnected 2010.02.04 22:49:35 LOG3[1615:140132733982480]: SSL_accept: Peer suddenly disconnected

1 0

Does stunnel support IPv6, and proxying from IPv4 to IPv6?
by Jeff Schmidt 05 Feb '10

05 Feb '10

Hello, I was wondering, does stunnel have IPv6 support? If so, does such support extend to the point of allowing the 'local' side of the connection (e.g. from a server process, or from a client application) to be made with IPv4, while the 'global' side is IPv6? If so, is it possible to use stunnel in an unencrypting mode (that is, not encrypting the data with SSL, but just using stunnel to proxy traffic between IPv4 and IPv6)? The reason I ask is that I am looking for a solution to allow me to IPv6-enable 'legacy' IPv4 applications. When I started thinking about this problem, I almost immediately remembered using stunnel in the past to SSL-enable IPv4 applications which didn't have built-in SSL support, and it occured to me that there was a lot of similarity between the non-SSL application problem, and the non-IPv6 application problem - that is, it seems like possibly, you could setup a sort of IPv6 tunnel using stunnel (or something similar), where the legacy application makes an local IPv4 connection to the stunnel/proxy software, and the proxy then makes an IPv6 connection, just like stunnel accepts local IPv4 connections (unecrypted) and then creates a second, proxied connection which is encrypted. Does that make any sense? (I hope so). So, can stunnel be used with both IPv4 and IPv6 simultaneously?

1 0

Memory problems
by Peter Griffin 05 Feb '10

05 Feb '10

Hi, I'm using stunnel 4.22 with OpenSSL 0.9.7m - I am using 4.22 because of the xforwarded-for patch and 4.27 is not supported. I am running stunnel in standalone mode on a P4 3.2Ghz with 1Gb of Ram. When I start haproxy & stunnel after a reboot, free memory starts at about 750Mb then slowly degrades to about 45Mb. After 8 more hours or so of operation our site was completely unbrowsable. I checked our firewall for unusual traffic, and there were none. Running top does not indicate any processes which are consuming all that memory and that is what I find weid. Only a reboot frees up the memory. Should I be running stunnel on more Ram? stunnel -v output: [root@lb1 ~]# stunnel -version stunnel 4.22 on x86_64-unknown-linux-gnu with OpenSSL 0.9.7m 23 Feb 2007 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Global options debug = 5 pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = ALL:!aNULL:!eNULL+RC4:@STRENGTH key = /usr/local/etc/stunnel/stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none stunnel.conf: #setuid=stunnel #setgid=proxy #debug = 3 #output = /var/log/stunnel.log socket=l:TCP_NODELAY=1 socket=r:TCP_NODELAY=1 [https] accept=10.0.1.50:443 connect=10.0.1.50:80 TIMEOUTclose=0 xforwardedfor=yes

1 0

HTTP Connect proxy patch
by Dmitry Gromov 05 Feb '10

05 Feb '10

Hi! It seems like the latest patch to support HTTP Connect proxy is for 4.05 version. Any one knows if it is compatible with the latest version? If not, is there more recent version of the patch? I also wonder why this never made to the code... Seems like a very useful feature. Thanks, Dmitry -- DG NJ

2 4

after 4.31 no more logging to syslog
by Axel Reinhold 05 Feb '10

05 Feb '10

> > with stunnel up to 4.29 i got syslog messages to /var/log/maillog. > > with stunnel 4.30 the startup was broken - some chroot-issues, > > with your patches i could get it running - with 4.31 stunnel is > > working for me but i don't get any syslogging any more - is there > > a way to get the old behaviour again? > > Please test: > ftp://stunnel.mirt.net/stunnel/stunnel-4.32b1.tar.gz > and let us know if it works for you. > > Best regards, > Mike > Dear Mike, looks very good - works for me 100%. Thanks. Cheers Axel

1 0

after 4.31 no more logging to syslog
by Axel Reinhold 04 Feb '10

04 Feb '10

with stunnel up to 4.29 i got syslog messages to /var/log/maillog. with stunnel 4.30 the startup was broken - some chroot-issues, with your patches i could get it running - with 4.31 stunnel is working for me but i don't get any syslogging any more - is there a way to get the old behaviour again? root@bongo opt]# grep stunnel /var/log/maillog Jan 27 21:38:25 bongo stunnel: LOG5[31985:16384]: stunnel 4.29 on i686-pc-linux-gnu with OpenSSL 0.9.8l 5 Nov 2009 Jan 27 21:38:25 bongo stunnel: LOG5[31985:16384]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Jan 27 21:38:25 bongo stunnel: LOG6[31985:16384]: file ulimit = 1024 (can be changed with 'ulimit -n') Jan 27 21:38:25 bongo stunnel: LOG6[31985:16384]: poll() used - no FD_SETSIZE limit for file descriptors Jan 27 21:38:25 bongo stunnel: LOG5[31985:16384]: 500 clients allowed Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 9 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 10 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 11 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: imaps bound to 0.0.0.0:993 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 12 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: pop3s bound to 0.0.0.0:995 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 13 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: arcorpop3 bound to 127.0.0.1:3003 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 14 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: bnvhpop3 bound to 127.0.0.1:3004 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 15 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: netidpop3 bound to 127.0.0.1:3005 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 16 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: icybolt bound to 127.0.0.1:3006 Jan 27 21:38:25 bongo stunnel: LOG7[31991:16384]: Created pid file /var/run/stunnel.pid Axel

2 1

Stunnel 4.31 released
by Michal Trojnara 03 Feb '10

03 Feb '10

The ChangeLog entry: Version 4.31, 2010.02.03, urgency: MEDIUM: * New features - Log file reopen on USR1 signal was added. * Bugfixes - Some regression issues introduced in 4.30 were fixed. SHA-1 value for stunnel-4.31.tar.gz: f51fc544a0554f6eee2bfca1fcb8ddcb8386ce32 Home page: http://stunnel.mirt.net/ Download: ftp://stunnel.mirt.net/stunnel/ Best regards, Michal Trojnara

1 0

after 4.30 no more working
by Axel Reinhold 03 Feb '10

03 Feb '10

My current compile-install-configure-run environment is broken with 4.30. Up to 4.29 stunnel is working ok for me. 4.30 compiles, installs but when running it (i simply start /opt/ssl/bin/stunnel) the behaviour is completely different. Up to version 4.29 the program simply starts and logs to syslog: root@bongo opt]# /opt/ssl/bin/stunnel root@bongo opt]# grep stunnel /var/log/maillog Jan 27 21:38:25 bongo stunnel: LOG5[31985:16384]: stunnel 4.29 on i686-pc-linux-gnu with OpenSSL 0.9.8l 5 Nov 2009 Jan 27 21:38:25 bongo stunnel: LOG5[31985:16384]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Jan 27 21:38:25 bongo stunnel: LOG6[31985:16384]: file ulimit = 1024 (can be changed with 'ulimit -n') Jan 27 21:38:25 bongo stunnel: LOG6[31985:16384]: poll() used - no FD_SETSIZE limit for file descriptors Jan 27 21:38:25 bongo stunnel: LOG5[31985:16384]: 500 clients allowed Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 9 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 10 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 11 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: imaps bound to 0.0.0.0:993 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 12 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: pop3s bound to 0.0.0.0:995 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 13 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: arcorpop3 bound to 127.0.0.1:3003 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 14 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: bnvhpop3 bound to 127.0.0.1:3004 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 15 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: netidpop3 bound to 127.0.0.1:3005 Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: FD 16 in non-blocking mode Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: SO_REUSEADDR option set on accept socket Jan 27 21:38:25 bongo stunnel: LOG7[31985:16384]: icybolt bound to 127.0.0.1:3006 Jan 27 21:38:25 bongo stunnel: LOG7[31991:16384]: Created pid file /var/run/stunnel.pid With 4.30 i get lots of messages to the console and stunnel does not fork into background - where is the magic to get the old behaviour with 4.30? At the end stunnel reports: daemon: No such file or directory (2) root@bongo opt]# /opt/ssl/bin/stunnel Reading configuration from file /etc/ssl/stunnel/stunnel.conf Snagged 64 random bytes from /root/.rnd Wrote 1024 new random bytes to /root/.rnd RAND_status claims sufficient entropy for the PRNG PRNG seeded successfully Certificate: /etc/ssl/stunnel/freakout.pem Certificate loaded Key file: /etc/ssl/stunnel/freakout.key Private key loaded SSL context initialized for service imaps Certificate: /etc/ssl/stunnel/freakout.pem Certificate loaded Key file: /etc/ssl/stunnel/freakout.key Private key loaded SSL context initialized for service pop3s SSL context initialized for service arcorpop3 SSL context initialized for service bnvhpop3 SSL context initialized for service netidpop3 SSL context initialized for service icybolt Configuration successful No limit detected for the number of clients FD=8 in non-blocking mode FD=9 in non-blocking mode FD=10 in non-blocking mode Option SO_REUSEADDR set on accept socket Service imaps bound to 0.0.0.0:993 Service imaps opened FD=10 FD=11 in non-blocking mode Option SO_REUSEADDR set on accept socket Service pop3s bound to 0.0.0.0:995 Service pop3s opened FD=11 FD=12 in non-blocking mode Option SO_REUSEADDR set on accept socket Service arcorpop3 bound to 127.0.0.1:3003 Service arcorpop3 opened FD=12 FD=13 in non-blocking mode Option SO_REUSEADDR set on accept socket Service bnvhpop3 bound to 127.0.0.1:3004 Service bnvhpop3 opened FD=13 FD=14 in non-blocking mode Option SO_REUSEADDR set on accept socket Service netidpop3 bound to 127.0.0.1:3005 Service netidpop3 opened FD=14 FD=15 in non-blocking mode Option SO_REUSEADDR set on accept socket Service icybolt bound to 127.0.0.1:3006 Service icybolt opened FD=15 Created pid file /var/run/stunnel.pid daemon: No such file or directory (2) removing pid file /var/run/stunnel.pid Axel

3 5

after 4.30 no more working
by Axel Reinhold 01 Feb '10

01 Feb '10

> Axel Reinhold wrote: > > root@bongo opt]# /opt/ssl/bin/stunnel > [cut] > > daemon: No such file or directory (2) > > removing pid file /var/run/stunnel.pid > > That's interesting. I couldn't reproduce it. > > Could you install strace tool and than execute: > strace -f -o /tmp/stunnel.log /opt/ssl/bin/stunnel > , and than send us the output of /tmp/stunnel.log? > > Mike Here's the strace-log.

2 1

Stunnel 4.3 not forwarding to server socket
by Vladimir Stariradev 28 Jan '10

28 Jan '10

Dear Stunnel users, I'm running stunnel on my server which accepts connections from my mobile phone emulator (j2me) like so: midlet app -> port:5555 stunnel -> port:6666 server. My midlet, which can be treated as a java app, uses ssl://127.0.0.1:5555 to connect to stunnel. I can establish a connection between the stunnel and the app because I can get information on the certificate. The problem is that when I send data from the midlet to the server, the server doesn't accept it, nor does it signal that anything has been received even when I have double-checked that the streams are setup. I have pasted my config and log files below. Any suggestions are fully appreciated. Regards, Vladimir version: stunnel 4.30 on x86-pc-mingw32-gnu with OpenSSL 0.9.8l 5 Nov 2009 stunnel.conf: cert = SecIM.pem debug = 7 ;output = stunnel.log [SecureIM] accept = 5555 connect = 6666 client = no Log file: 2010.01.28 17:51:09 LOG5[3828:1772]: Reading configuration from file stunnel.conf 2010.01.28 17:51:09 LOG7[3828:1772]: Snagged 64 random bytes from C:/.rnd 2010.01.28 17:51:09 LOG7[3828:1772]: Wrote 0 new random bytes to C:/.rnd 2010.01.28 17:51:09 LOG7[3828:1772]: RAND_status claims sufficient entropy for the PRNG 2010.01.28 17:51:09 LOG7[3828:1772]: PRNG seeded successfully 2010.01.28 17:51:09 LOG7[3828:1772]: Certificate: SecIM.pem 2010.01.28 17:51:09 LOG7[3828:1772]: Certificate loaded 2010.01.28 17:51:09 LOG7[3828:1772]: Key file: SecIM.pem 2010.01.28 17:51:11 LOG7[3828:1772]: Private key loaded 2010.01.28 17:51:11 LOG7[3828:1772]: SSL context initialized for service SecureIM 2010.01.28 17:51:11 LOG5[3828:1772]: Configuration successful 2010.01.28 17:51:11 LOG5[3828:1772]: No limit detected for the number of clients 2010.01.28 17:51:11 LOG7[3828:1772]: FD=168 in non-blocking mode 2010.01.28 17:51:11 LOG7[3828:1772]: Option SO_REUSEADDR set on accept socket 2010.01.28 17:51:11 LOG7[3828:1772]: Service SecureIM bound to 0.0.0.0:5555 2010.01.28 17:51:11 LOG7[3828:1772]: Service SecureIM opened FD=168 2010.01.28 17:51:11 LOG5[3828:1772]: stunnel 4.30 on x86-pc-mingw32-gnu with OpenSSL 0.9.8l 5 Nov 2009 2010.01.28 17:51:11 LOG5[3828:1772]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.01.28 17:52:13 LOG7[3828:2836]: Service SecureIM accepted FD=212 from 127.0.0.1:56133 2010.01.28 17:52:13 LOG7[3828:2836]: Creating a new thread 2010.01.28 17:52:13 LOG7[3828:2836]: New thread created 2010.01.28 17:52:13 LOG7[3828:3336]: Service SecureIM started 2010.01.28 17:52:13 LOG7[3828:3336]: FD=212 in non-blocking mode 2010.01.28 17:52:13 LOG7[3828:3336]: Option TCP_NODELAY set on local socket 2010.01.28 17:52:13 LOG5[3828:3336]: Service SecureIM accepted connection from 127.0.0.1:56133 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): before/accept initialization 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 read client hello A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 write server hello A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 write certificate A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 write server done A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 flush data 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 read client key exchange A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 read finished A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 write change cipher spec A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 write finished A 2010.01.28 17:52:13 LOG7[3828:3336]: SSL state (accept): SSLv3 flush data 2010.01.28 17:52:13 LOG7[3828:3336]: 1 items in the session cache 2010.01.28 17:52:13 LOG7[3828:3336]: 0 client connects (SSL_connect()) 2010.01.28 17:52:13 LOG7[3828:3336]: 0 client connects that finished 2010.01.28 17:52:13 LOG7[3828:3336]: 0 client renegotiations requested 2010.01.28 17:52:13 LOG7[3828:3336]: 1 server connects (SSL_accept()) 2010.01.28 17:52:13 LOG7[3828:3336]: 1 server connects that finished 2010.01.28 17:52:13 LOG7[3828:3336]: 0 server renegotiations requested 2010.01.28 17:52:13 LOG7[3828:3336]: 0 session cache hits 2010.01.28 17:52:13 LOG7[3828:3336]: 0 external session cache hits 2010.01.28 17:52:13 LOG7[3828:3336]: 0 session cache misses 2010.01.28 17:52:13 LOG7[3828:3336]: 0 session cache timeouts 2010.01.28 17:52:13 LOG6[3828:3336]: SSL accepted: new session negotiated 2010.01.28 17:52:13 LOG6[3828:3336]: Negotiated ciphers: RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 2010.01.28 17:52:13 LOG7[3828:3336]: FD=424 in non-blocking mode 2010.01.28 17:52:13 LOG6[3828:3336]: connect_blocking: connecting 127.0.0.1:6666 2010.01.28 17:52:13 LOG7[3828:3336]: connect_blocking: s_poll_wait 127.0.0.1:6666: waiting 10 seconds 2010.01.28 17:52:13 LOG5[3828:3336]: connect_blocking: connected 127.0.0.1:6666 2010.01.28 17:52:13 LOG5[3828:3336]: Service SecureIM connected remote server from 127.0.0.1:56134 2010.01.28 17:52:13 LOG7[3828:3336]: Remote FD=424 initialized 2010.01.28 17:52:13 LOG7[3828:3336]: Option TCP_NODELAY set on remote socket 2010.01.28 17:54:02 LOG3[3828:3336]: SSL_read: Connection reset by peer (WSAECONNRESET) (10054) 2010.01.28 17:54:02 LOG5[3828:3336]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2010.01.28 17:54:02 LOG7[3828:3336]: Service SecureIM finished (0 left)

1 1

Re: [stunnel-users] need to restart stunnel if stunnel starts before network?
by Michal Trojnara 23 Jan '10

23 Jan '10

Zhang Weiwu wrote: > For developer how do you think make stunnel resolving the domain when > establishing connection? Sure. This is already implemented and described in the manual: http://stunnel.mirt.net/static/stunnel.html The option is: delay = yes Mike

1 0

FIPS compilation patch for stunnel 4.30
by Michal Trojnara 21 Jan '10

21 Jan '10

Dear Users, Please find a tiny patch for FIPS mode of stunnel 4.30: ftp://stunnel.mirt.net/stunnel/fips.patch BTW: Please consider making a donation if you appreciate my work on configuration file reloading feature. Use PayPal Donate button on http://stunnel.mirt.net/ Mike

1 0

Stunnel 4.30 released
by Michal Trojnara 21 Jan '10

21 Jan '10

The ChangeLog entry: Version 4.30, 2010.01.21, urgency: LOW/EXPERIMENTAL: * New features - Graceful configuration reload with HUP signal on Unix and with GUI on Windows. This release involves major modifications of the code. I expect some regression issues, so please make sure to test this version well before running it on your production systems. SHA-1 value for stunnel-4.30.tar.gz: 46d21c3ad0e761d697f4de8c258ef999287f13f9 Home page: http://stunnel.mirt.net/ Download: ftp://stunnel.mirt.net/stunnel/ Best regards, Michal Trojnara

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users