Here is the ChangeLog entry for the new stunnel 4.08:
Version 4.08, 2005.02.27, urgency: LOW:
* New features
- New -quiet option was added to install NT service without a message
box.
* Bugfixes
- Using $(DESTDIR) in tools/Makefile.am.
- Define NI_NUMERICHOST and NI_NUMERICSERV when needed.
- Length of configuration file line increased from 256B to 16KB.
- Stunnel sends close_notify when a close_notify is received from SSL
peer and all remaining data is sent to SSL peer.
- Some fixes for bugs detected by the watchdog.
* Release notes
- There were many changes in the transfer() function (the main loop).
This version should be thoroughly tested before using it in the
mission-critical environment.
Home page & downloads: http://stunnel.mirt.net/
Best regards,
Mike
Hello list
I have stunnel 4.7
When I run in stunnel.log is error
########
Cannot create pid file /var/run/stunnel.pid
#############
The directory /var/run is ok example
#######
prueba:/usr/local/etc/stunnel # ls -l /var/run
total 37
drwxr-xr-x 7 root root 536 Jan 25 12:03 .
drwxr-xr-x 13 root root 336 Sep 8 15:19 ..
srw-rw-rw- 1 root root 0 Jan 25 12:03 .resmgr_socket
#####
My stunnel.conf is
#client = no
#
# chroot + user (comment out to disable)
#
chroot = /var/lib/stunnel/
setuid = stunnel
setgid = nogroup
pid = /var/run/stunnel.pid
cert = /usr/local/etc/stunnel/stunnel.pem
[ssmtp]
accept = 465
connect = 25
####
Please, help me.
Best Regards
Morell
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
New release fixes several bugs introduced in version 4.06.
ChangeLog entry:
Version 4.07, 2005.01.03, urgency: MEDIUM:
* Bugfixes
- Problem with infinite poll() timeout negative, but not equal to -1 fixed.
- Problem with a file descriptor ready to be read just after a non-blocking
connect call fixed.
- Compile error with EAI_NODATA not defined or equal to EAI_NONAME fixed.
- IP address and TCP port textual representation length (IPLEN) increased
to 128 bytes.
- OpenSSL engine support is only used if engine.h header file exists.
- Broken NT Service mode on WIN32 platform fixed.
- Support for IPv4-only WIN32 machines restored.
Homepage: http://stunnel.mirt.net/
Best regards,
Mike
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFB2IcR/NU+nXTHMtERAn/hAJ42XjEtUrkyixamOeMV0rRGCvqwDACg21LB
sYFF8L4teETWdrkLjfkdX2E=
=qOfD
-----END PGP SIGNATURE-----
Dear Users,
Frank de Bot has found a bug in stunnel 4.06. I've attached the patch
stunnel needs to work on FreeBSD (and possibly other) systems. It's not
needed on Linux and WIN32 platforms.
Best regards,
Mike
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Here is the ChangeLog entry:
Version 4.06, 2004.12.26, urgency: LOW:
* New feature sponsored by SURFnet http://www.surfnet.nl/
- IPv6 support (to be enabled with ./configure --enable-ipv6).
* New features
- poll() support - no more FD_SETSIZE limit!
- Multiple connect=host:port options are allowed in a single service
section. Remote hosts are connected using round-robin algorithm.
This feature is not compatible with delayed resolver.
- New 'compression' option to enable compression. To use zlib
algorithm you have to enable it when building OpenSSL library.
- New 'engine' option to select a hardware engine.
- New 'TIMEOUTconnect' option with 10 seconds default added.
- stunnel3 perl script to emulate version 3.x command line options.
- French manual updated by Bernard Choppy <choppy AT free POINT fr>.
- A watchdog to detect transfer() infinite loops added.
- Configuration file comment character changed from '#' to ';'.
'#' will still be recognized to keep compatibility.
- MT-safe getaddrinfo() and getnameinfo() are used where available
to get better performance on resolver calls.
- Automake upgraded from 1.4-p4 to 1.7.9.
* Bugfixes
- log() changed to s_log() to avoid conflicts on some systems.
- Common CRIT_INET critical section introduced instead of separate
CRIT_NTOA and CRIT_RESOLVER to avoid potential problems with
libwrap (TCP Wrappers) library.
- CreateThread() finally replaced with _beginthread() on Win32.
- make install creates $(localstatedir)/stunnel.
$(localstatedir)/stunnel/dev/zero is also created on Solaris.
- Race condition with client session cache fixed.
- Other minor bugfixes.
* Release notes
- Win32 port requires Winsock2 to work.
Some Win95 systems may need a free update from Microsoft.
http://www.microsoft.com/windows95/downloads/
- Default is *not* to use IPv6 '::' for accept and '::1' for
connect. For example to accept pop3s on IPv6 you could use:
'accept = :::995'. I hope the new syntax is clear enough.
Homepage: http://stunnel.mirt.net/
Download: ftp://stunnel.mirt.net/stunnel/
Best regards,
Mike
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFBzf1b/NU+nXTHMtERAtUVAKD+41kLTFS/qrOleskfH1MZEkYr2ACfcJPZ
4QQk085XimnyplqENZaT7nk=
=zIM2
-----END PGP SIGNATURE-----
Hi, I tried to subscribe myself to the list; however,
I never got the confirmation E-mail.
I was wondering if there is a way to have NFS running
on top of Stunnel.
Also, I was wondering why there is so little movement
in the list (and the web page) since March this year.
Is there any new development?
Please let me know.
Best regards,
E SA
_______________________________
Do you Yahoo!?
Declare Yourself - Register online to vote today!
http://vote.yahoo.com
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Dear Users,
My ftp site is back online. Thanks to Brian Hatch for reporting the problem.
Best regards,
Mike
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFBN0vB/NU+nXTHMtERAqQ4AJ95KWL5PUpLZOMqQ4xOJYKqeVwgxgCfVIcc
yMYncLDroE5wwHxJj5QtjGI=
=Tryt
-----END PGP SIGNATURE-----
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Dear Users,
I've written a perl script to emulate stunnel 3.x command line
with stunnel versions 4.05 and later. I hope you'll like it.
It's ready for download here:
ftp://stunnel.mirt.net/stunnel/stunnel3
Best regards,
Mike
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFBNkEq/NU+nXTHMtERAvVGAJ4yuDLNrCOFTLfuuFRIzwShDkd/lwCfcVLa
bLhgSAs2gXuzca8ZkJmCb9Q=
=SInU
-----END PGP SIGNATURE-----
