[stunnel-users] Stunnel listen on different ports

Tue Jul 21 23:12:02 CEST 2009

:-)

Thanks!

I was not including the blocks: []

After including the blocks: [] it works.

Thank You.

> Just configure as many "service" block as accept/connect pair you need.
> [service1]
> ...
> [service2]
> ...
> Pierre Delaage
>
> Quoting Noel Sanchez <noel at lighthouselane.org>:
>
>> I have had a working stunnel conf for much time, very happy with it.
>>
>> [stunnel]
>> accept = 0.0.0.0:30000
>> connect = 192.168.27.102:8000
>>
>> I have stunnel listening on port 30000 and then sending to
>> 192.168.27.102
>> on port 8000. Works good.
>>
>> I now want to add more listening ports to stunnel, like so:
>>
>> [stunnel]
>> accept = 0.0.0.0:30000
>> connect = 192.168.27.102:8000
>> accept = 0.0.0.0:30006
>> connect = 192.168.27.102:8006
>>
>> When I do this, stunnel only binds to 30006, per my log file:
>> stunnel bound to 0.0.0.0:30006
>>
>> And when I do a netstat -vatn:
>> tcp        0      0 0.0.0.0:30006               0.0.0.0:*
>>  LISTEN
>>
>> It is not listening on port 30000 anymore. I'd like to accepts
>> connections
>> on many different ports, then send accordingly. Can I do this? Why does
>> stunnel only listen to one port when I add more accept lines in its
>> config?
>>
>>
>> Noel
>>
>>
>> _______________________________________________
>> stunnel-users mailing list
>> stunnel-users at mirt.net
>> http://stunnel.mirt.net/mailman/listinfo/stunnel-users
>>
>
>
>