Hi, It seems that the problem occur when the client write large buffers (30-40Kbytes) on each write. Any idea how to solve it Thanks Erez ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Nadav, Erez Sent: Wednesday, June 07, 2006 6:00 PM To: [email protected] Subject: [stunnel-users] stunnel error Hi, I use stunnel 4.14 and face this error when performing buffer writes from client to remote side SSL_write: 140D5042: error:140D5042:SSL routines:SSL3_CTRL:called a function you should not call Does anybody know how can I overcome this ??? Thanks Erez ________________________________________________________________________ __________________ This electronic message contains information from Verint Systems, which may be privileged and confidential. The information is intended to be for the use of the individual(s)or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by replying to this email (1). __________________________________________________________________________________________ This electronic message contains information from Verint Systems, which may be privileged and confidential. The information is intended to be for the use of the individual(s)or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by replying to this email (1).