All,
I am load testing stunnel as a front end to a web server. The problem I have is that the connection is dropping even though JMeter is set to keep-alive on the http sampler. I was wondering if anyone knew if this was a JMeter issue – IE it does not do http1.1 properly with SSL or should I dig deeper?
The stunnel log just shows the socket being closed down at the end of each request. Now – as stunnel should not care what data is going over ssl, then there must be something from JMeter that is triggering it to drop the socket. My thinking is that this is either an SSL session end or an actual FIN.
In the absence of any feedback – I think I will try using stunnel in both client and server modes and, as I already know JMeter is OK at keep-alive non https – I should thus find out where the issue lays.
Thanks for any info
AJ
PS – I am working on XP both ends with JMeter 2.2 and the latest stunnel.
PPS – Naturally, once I have this figured I will post the method and results to nerds-central
Alexander J Turner Ph.D. HYPERLINK "http://www.deployview.com%22www.deployview.com HYPERLINK "http://www.nerds-central.blogspot.com%22www.nerds-central.blogspot.com HYPERLINK "http://www.project-network.com%22www.project-network.com
Hi,
I think that *one* list is enough, I will answer in the future *only* to stunnel list!
On Don 28.09.2006 19:30, Alex Turner wrote:
I am load testing stunnel as a front end to a web server. The problem I have is that the connection is dropping even though JMeter is set to keep-alive on the http sampler. I was wondering if anyone knew if this was a JMeter issue ? IE it does not do http1.1 properly with SSL or should I dig deeper?
Which web server? If you use apache then look into the httpd.conf or ssl.conf for some 'SetEnvIf User-Agent' entries.
PS ? I am working on XP both ends with JMeter 2.2 and the latest stunnel.
What do you mean with 'both ends'?! I don't know how jmeter works!
PPS ? Naturally, once I have this figured I will post the method and results to nerds-central
Please share the url.
Regards
Alex
Alex,
I am sure that *one* emphasis would also be enough.
Further to your remark "don't know how jmeter works!" does it not make sense to ask the people on the jmeter list as well stunnel - as they do know how it works!
My setup is thus:
[JMeter/XP]-> network -> [Stunnel->loopback->TAG.net]
Now - I know that TAG.net will respond correctly to an HTTP 1.1 keep-alive. I know this because I wrote it and can monitor its socket activity. I have also instructed JMeter to use keep-alive; I know that in http mode it also uses keep-alive correctly - because I have monitored it with TAG.net.
Never the less, the socket connection is being dropped from Stunnel to TAG.net after each separate http request. This results in a FD_CLOSE being received from the windows kernel to the socket in TAG.net which then causes TAG.net to disconnect the socket. To put this another way, the TCP connection is being closed by Stunnel via Stunnel stimulating the generation of a FIN packed on the loopback addaptor.
Now - my question which is relevant to both JMeter and Stunnel is thus:
Why is the socket being dropped - is it because JMeter is dropping the socket or is it because stunnel is dropping the socket. Further, if it is Stunnel, why is it dropping the socket, and equally for JMeter, why.
Whilst I would be completely possible for me to work this out by going through the source code of JMeter and Stunnel, I thought it might save some considerable time if someone had previously encountered such a situation and could thus point me in the correct direction.
Regards
AJ
PS - the url for nerds-central is, as always, at the bottom of my email. PPS - for further information on TAG.net see www.deployview.com
Alexander J Turner Ph.D. www.deployview.com www.nerds-central.blogspot.com www.project-network.com
-----Original Message----- From: Alexander Lazic [mailto:[email protected]] Sent: 28 September 2006 20:21 To: Alex Turner Cc: JMeter Users List; [email protected] Subject: Re: [stunnel-users] SSL and keep alive
Hi,
I think that *one* list is enough, I will answer in the future *only* to stunnel list!
On Don 28.09.2006 19:30, Alex Turner wrote:
I am load testing stunnel as a front end to a web server. The problem I have is that the connection is dropping even though JMeter is set to keep-alive on the http sampler. I was wondering if anyone knew if this was a JMeter issue ? IE it does not do http1.1 properly with SSL or should I dig deeper?
Which web server? If you use apache then look into the httpd.conf or ssl.conf for some 'SetEnvIf User-Agent' entries.
PS ? I am working on XP both ends with JMeter 2.2 and the latest stunnel.
What do you mean with 'both ends'?! I don't know how jmeter works!
PPS ? Naturally, once I have this figured I will post the method and results to nerds-central
Please share the url.
Regards
Alex
On Don 28.09.2006 21:59, Alex Turner wrote:
Further to your remark "don't know how jmeter works!" does it not make sense to ask the people on the jmeter list as well stunnel - as they do know how it works!
Well then you need to switch to the jmeter list I think.
My setup is thus:
[JMeter/XP]-> network -> [Stunnel->loopback->TAG.net]
Now - I know that TAG.net will respond correctly to an HTTP 1.1 keep-alive. I know this because I wrote it and can monitor its socket activity. I have also instructed JMeter to use keep-alive; I know that in http mode it also uses keep-alive correctly - because I have monitored it with TAG.net.
Never the less, the socket connection is being dropped from Stunnel to TAG.net after each separate http request. This results in a FD_CLOSE being received from the windows kernel to the socket in TAG.net which then causes TAG.net to disconnect the socket. To put this another way, the TCP connection is being closed by Stunnel via Stunnel stimulating the generation of a FIN packed on the loopback addaptor.
As you have written TAG.net have you dumped out the request and response header?
What errors/warning do you get when you run stunnel in debug mode?!
Now - my question which is relevant to both JMeter and Stunnel is thus:
Why is the socket being dropped - is it because JMeter is dropping the socket or is it because stunnel is dropping the socket. Further, if it is Stunnel, why is it dropping the socket, and equally for JMeter, why.
Have you looked with some tcpdumps what's going on on the tcp level between jmeter and stunnel?!
Regards
Alex
-
Alex Turner -
Alexander Lazic